summaryrefslogtreecommitdiff
path: root/arch/m68k/include
AgeCommit message (Collapse)AuthorFilesLines
2012-03-05BUG: headers with BUG/BUG_ON etc. need linux/bug.hPaul Gortmaker1-0/+1
If a header file is making use of BUG, BUG_ON, BUILD_BUG_ON, or any other BUG variant in a static inline (i.e. not in a #define) then that header really should be including <linux/bug.h> and not just expecting it to be implicitly present. We can make this change risk-free, since if the files using these headers didn't have exposure to linux/bug.h already, they would have been causing compile failures/warnings. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-07m68k: Add shared bit to Coldfire kernel page entriesAlexander Stein1-1/+2
We had problems accessing our NOR flash trough mtd. The system always got stuck at attaching UBI using ubiattach if booted from NFS or after mounting squashfs as rootfs directly from NOR flash. After some testing of the new changes introduced from v3.2-rc1 to v3.2-rc7 we had to apply the following patch to get mtd working again. [gerg: The problem was ultimately caused by allocated kernel pages not having the shared (SG) bit set. Without the SG bit set the MMU will look for page matches incorporating the ASID as well. Things like module regions allocated using vmalloc would fault when other processes run. ] Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-01-27Merge branch 'for-linus' of ↵Linus Torvalds1-13/+0
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Fix assembler constraint to prevent overeager gcc optimisation mac_esp: rename irq mac_scsi: dont enable mac_scsi irq before requesting it macfb: fix black and white modes m68k/irq: Remove obsolete IRQ_FLG_* definitions Fix up trivial conflict in arch/m68k/kernel/process_mm.c as per Geert.
2012-01-22m68k/irq: Remove obsolete IRQ_FLG_* definitionsGeert Uytterhoeven1-13/+0
The m68k core irq code stopped honoring these flags during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-01-09Merge branch 'pm-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) PM / Hibernate: Implement compat_ioctl for /dev/snapshot PM / Freezer: fix return value of freezable_schedule_timeout_killable() PM / shmobile: Allow the A4R domain to be turned off at run time PM / input / touchscreen: Make st1232 use device PM QoS constraints PM / QoS: Introduce dev_pm_qos_add_ancestor_request() PM / shmobile: Remove the stay_on flag from SH7372's PM domains PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode PM: Drop generic_subsys_pm_ops PM / Sleep: Remove forward-only callbacks from AMBA bus type PM / Sleep: Remove forward-only callbacks from platform bus type PM: Run the driver callback directly if the subsystem one is not there PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412. PM / Sleep: Merge internal functions in generic_ops.c PM / Sleep: Simplify generic system suspend callbacks PM / Hibernate: Remove deprecated hibernation snapshot ioctls PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled() ARM: S3C64XX: Implement basic power domain support PM / shmobile: Use common always on power domain governor ... Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused XBT_FORCE_SLEEP bit
2012-01-09Merge branch 'for-linus2' of ↵Linus Torvalds2-35/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits) reiserfs: Properly display mount options in /proc/mounts vfs: prevent remount read-only if pending removes vfs: count unlinked inodes vfs: protect remounting superblock read-only vfs: keep list of mounts for each superblock vfs: switch ->show_options() to struct dentry * vfs: switch ->show_path() to struct dentry * vfs: switch ->show_devname() to struct dentry * vfs: switch ->show_stats to struct dentry * switch security_path_chmod() to struct path * vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb vfs: trim includes a bit switch mnt_namespace ->root to struct mount vfs: take /proc/*/mounts and friends to fs/proc_namespace.c vfs: opencode mntget() mnt_set_mountpoint() vfs: spread struct mount - remaining argument of next_mnt() vfs: move fsnotify junk to struct mount vfs: move mnt_devname vfs: move mnt_list to struct mount vfs: switch pnode.h macros to struct mount * ...
2012-01-07Merge branch 'for-linus' of ↵Linus Torvalds11-39/+43
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (21 commits) m68k/mac: Make CONFIG_HEARTBEAT unavailable on Mac m68k/serial: Remove references to obsolete serial config options m68k/net: Remove obsolete IRQ_FLG_* users m68k: Don't comment out syscalls used by glibc m68k/atari: Move declaration of atari_SCC_reset_done to header file m68k/serial: Remove references to obsolete CONFIG_SERIAL167 m68k/hp300: Export hp300_ledstate m68k: Initconst section fixes m68k/mac: cleanup macro case mac_scsi: fix mac_scsi on some powerbooks m68k/mac: fix powerbook 150 adb_type m68k/mac: fix baboon irq disable and shutdown m68k/mac: oss irq fixes m68k/mac: fix nubus slot irq disable and shutdown m68k/mac: enable via_alt_mapping on performa 580 m68k/mac: cleanup forward declarations m68k/mac: cleanup mac_irq_pending m68k/mac: cleanup mac_clear_irq m68k/mac: early console m68k/mvme16x: Add support for EARLY_PRINTK ... Fix up trivial conflict in arch/m68k/Kconfig.debug due to new EARLY_PRINTK config option addition clashing with movement of the BOOTPARAM options.
2012-01-07Merge branch 'for-next' of ↵Linus Torvalds30-302/+1121
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (56 commits) m68k: allow ColdFire 547x and 548x CPUs to be built with MMU enabled m68k/Kconfig: Separate classic m68k and coldfire early m68k: add ColdFire with MMU enabled support to the m68k mem init code m68k: do not use m68k startup or interrupt code for ColdFire CPUs m68k: add ColdFire FPU support for the V4e ColdFire CPUs m68k: adjustments to stack frame for ColdFire with MMU enabled m68k: use non-MMU linker script for ColdFire MMU builds m68k: ColdFire with MMU enabled uses same clocking code as non-MMU m68k: add code to setup a ColdFire 54xx platform when MMU enabled m68k: use non-MMU entry.S code when compiling for ColdFire CPU m68k: create ColdFire MMU pgalloc code m68k: compile appropriate mm arch files for ColdFire MMU support m68k: ColdFire V4e MMU paging init code and miss handler m68k: use ColdFire MMU read/write bit flags when ioremapping m68k: modify cache push and clear code for ColdFire with MMU enable m68k: use tracehook_report_syscall_entry/exit for ColdFire MMU ptrace path m68k: ColdFire V4e MMU context support code m68k: MMU enabled ColdFire needs 8k ELF alignment m68k: set ColdFire MMU page size m68k: define PAGE_OFFSET_RAW for ColdFire CPU with MMU enabled ...
2012-01-04consolidate a bunch of ipcbuf.h instancesAl Viro1-29/+1
... some still remain weird :-/ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-04consolidate umode_t declarationsAl Viro1-6/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-12-30m68k: add ColdFire FPU support for the V4e ColdFire CPUsGreg Ungerer1-0/+2
The V4e ColdFire CPU family also has an integrated FPU (as well as the MMU). So add code to support this hardware along side the existing m68k FPU code. The ColdFire FPU is of course different to all previous 68k FP units. It is close in operation to the 68060, but not completely compatible. The biggest issue to deal with is that the ColdFire FPU multi-move instructions are different. It does not support multi-moving the FP control registers, and the multi-move of the FP data registers uses a different instruction mnemonic. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: create ColdFire MMU pgalloc codeGreg Ungerer2-1/+105
Add code to support the ColdFire V4e MMU pgalloc functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: ColdFire V4e MMU paging init code and miss handlerGreg Ungerer1-0/+2
The different ColdFire V4e MMU requires its own dedicated paging init code, and a TLB miss handler for its software driven TLB. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: use ColdFire MMU read/write bit flags when ioremappingGreg Ungerer1-0/+1
The ColdFire MMU has separate read and write bits, unlike the Motorola m68k MMU which has a single read-only bit. Define a _PAGE_READWRITE value for the Motorola MMU, which is 0, so we can unconditionaly include that in the page table entry bits when setting up ioremapped pages. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-30m68k: ColdFire V4e MMU context support codeGreg Ungerer2-49/+211
Add code to manage the context's of the ColdFire V4e MMU. This code is mostly taken from the Freescale 2.6.35 kernel BSP for MMU enabled ColdFire. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: MMU enabled ColdFire needs 8k ELF alignmentGreg Ungerer1-3/+3
Like the SUN3 hardware MMU the ColdFire MMU uses 8k pages. So we want our ELF page size alingment to also be 8k. Modify the ELF alignment setting. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: set ColdFire MMU page sizeGreg Ungerer1-3/+3
We use the ColdFire V4e MMU page size of 8KiB. Define PAGE_SHIFT appropriately. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: define PAGE_OFFSET_RAW for ColdFire CPU with MMU enabledGreg Ungerer1-6/+4
The ColdFire CPU configurations need PAGE_OFFSET_RAW set to the base of their RAM. It doesn't matter if they are running with the MMU enabled or disabled, it is always set to the base of RAM. We can keep the choices simple here and key of CONFIG_RAMBASE. If it is defined we are on a plaftorm (ColdFire or other non-MMU systems) which have a configurable RAM base, just use it. Reported-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-30m68k: add TLB flush support for the ColdFire V4e MMU hardwareGreg Ungerer1-6/+17
The ColdFire V4e MMU is unlike any of the other m68k MMU hardware. It needs its own TLB flush support code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: modify ColdFire 54xx cache support for MMU enabledGreg Ungerer1-1/+31
Modify the cache setup for the ColdFire 54xx parts when running with the MMU enabled. We want to map the peripheral register space (MBAR region) as non cacheable. And create an identity mapping for all of RAM for the kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: add cache support for V4e ColdFire cores running with MMU enabledGreg Ungerer1-5/+83
Add code to deal with instruction, data and branch caches of the V4e ColdFire cores when they are running with the MMU enabled. This code is loosely based on Freescales changes for the caches of the V4e ColdFire in the 2.6.25 kernel BSP. That code was originally by Kurt Mahan <kmahan@freescale.com> (now <kmahan@xmission.com>). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: add page table size definitions for ColdFire V4e MMUGreg Ungerer1-6/+24
Define the page table size and attributes for the ColdFire V4e MMU. Also setup the vmalloc and kmap regions we will use. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: page table support definitions and code for ColdFire MMUGreg Ungerer1-0/+425
The ColdFire V4e MMU is nothing like any of the other m68k MMU's. So we need to create a set of definitions and support routines for the kernels paging functions. This is largely taken from Freescales BSP code for this (though it was a 2.6.25 kernel). I have cleaned it up alot from the original. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: set register a2 to current if MMU enabled on ColdFireGreg Ungerer1-1/+9
Virtual memory m68k systems build with register a2 dedicated to being the current proc pointer (non-MMU don't do this). Add code to the ColdFire interrupt and exception processing to set this on entry, and at context switch time. We use the same GET_CURRENT() macro that MMU enabled code uses - modifying it so that the assembler is ColdFire clean. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-30m68k: add ColdFire 54xx CPU MMU memory init codeGreg Ungerer2-3/+4
Add code to the 54xx ColdFire CPU init to setup memory ready for the m68k paged memory start up. Some of the RAM variables that were specific to the non-mmu code paths now need to be used during this setup, so when CONFIG_MMU is enabled. Move these out of page_no.h and into page.h. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-30m68k: use addr_limit checking for m68k CPUs that do no support address spacesGreg Ungerer2-14/+19
The ColdFire CPU family, and the original 68000, do not support separate address spaces like the other 680x0 CPU types. Modify the set_fs()/get_fs() functions and macros to use a thread_info addr_limit for address space checking. This is pretty much what all other architectures that do not support separate setable address spaces do. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: modify user space access functions to support ColdFire CPUsGreg Ungerer2-15/+31
Modify the user space access functions to support the ColdFire V4e cores running with MMU enabled. The ColdFire processors do not support the "moves" instruction used by the traditional 680x0 processors for moving data into and out of another address space. They only support the notion of a single address space, and you use the usual "move" instruction to access that. Create a new config symbol (CONFIG_CPU_HAS_ADDRESS_SPACES) to mark the CPU types that support separate address spaces, and thus also support the sfc/dfc registers and the "moves" instruction that go along with that. The code is almost identical for user space access, so lets just use a define to choose either the "move" or "moves" in the assembler code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-30m68k: add TASK definitions for ColdFires running with MMUGreg Ungerer1-6/+10
Add appropriate TASK_SIZE and TASK_UNMAPPED_BASE definitions for running on ColdFire V4e cores with MMU enabled. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: make interrupt definitions conditional on correct CPU typesGreg Ungerer1-2/+3
The interrupt handling support defines and code is not so much conditional on an MMU being present (CONFIG_MMU), as it is on which type of CPU we are building for. So make the code conditional on the CPU types instead. The current irq.h is mostly specific to the interrupt code for the 680x0 CPUs, so it should only be used for them. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: definitions for the ColdFire V4e MMU hardwareGreg Ungerer1-0/+110
Basic register level definitions to support the internal MMU of the V4e ColdFire cores. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: add machine and CPU definitions for ColdFire coresGreg Ungerer1-0/+14
Create machine and CPU definitions to support the ColdFire CPU family members that have a virtual memory management unit. The ColdFire V4e core contains an MMU, and it is quite different to any other 68k family members. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-24m68knommu: remove unused anchor.h include fileGreg Ungerer1-112/+0
The code that used the anchor.h include file has long been removed from the kernel. Remove it too. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24m68k: handle presence of 64bit mul/div instructions cleanlyGreg Ungerer1-4/+4
The traditional 68000 processors and the newer reduced instruction set ColdFire processors do not support the 32*32->64 multiply or the 64/32->32 divide instructions. This is not a difference based on the presence of a hardware MMU or not. Create a new config symbol to mark that a CPU type doesn't support the longer multiply/divide instructions. Use this then as a basis for using the fast 64bit based divide (in div64.h) and for linking in the extra libgcc functions that may be required (mulsi3, divsi3, etc). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-24m68k: simpler m68k and ColdFire CPU's can use generic csum codeGreg Ungerer1-26/+5
We have two implementations of the IP checksuming code for the m68k arch. One uses the more advanced instructions available in 68020 and above processors, the other uses the simpler instructions available on the original 68000 processors and the modern ColdFire processors. This simpler code is pretty much the same as the generic lib implementation of the IP csum functions. So lets just switch over to using that. That means we can completely remove the checksum_no.c file, and only have the local fast code used for the more complex 68k CPU family members. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24m68k: make fp register stores consistent for m68k and ColdFireGreg Ungerer2-8/+0
There is no reason we can't make the saved fp registers the same for all m68k types and ColdFire. There is a little wasted space, but the code consistency and cleanliness is a big win. sigcontext.h is an exported header, but currently there is no in-mainline users of the !__uClinux__ and __mcoldfire__ case that this change effects. Even better this change actually makes this structure consistent with the out-of-mainline ColdFire/MMU code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-24m68k: print memory layout info in boot logGreg Ungerer1-0/+1
Output a table of the kernel memory regions at boot time. This is taken directly from the ARM architecture code that does this. The table looks like this: Virtual kernel memory layout: vector : 0x00000000 - 0x00000400 ( 0 KiB) kmap : 0xd0000000 - 0xe0000000 ( 256 MiB) vmalloc : 0xc0000000 - 0xcfffffff ( 255 MiB) lowmem : 0x00000000 - 0x02000000 ( 32 MiB) .init : 0x00128000 - 0x00134000 ( 48 KiB) .text : 0x00020000 - 0x00118d54 ( 996 KiB) .data : 0x00118d60 - 0x00126000 ( 53 KiB) .bss : 0x00134000 - 0x001413e0 ( 53 KiB) This has been very useful while debugging the ColdFire virtual memory support code. But in general I think it is nice to know extacly where the kernel has layed everything out on boot. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24m68k: remove thread_info struct from thread structGreg Ungerer2-32/+0
Currently on m68k we have a comeplete thread_info structure stored inside of the thread_struct, and we also have it in the initial part of the kernel stack. Mostly the code currently uses the one inside of the thread_struct, only using the "task" pointer from the stack based one. This is wasteful and confusing, we should only have the single instance of thread_info inside the stack page. And this is the norm for all other architectures. This change makes m68k handle thread_info consistently on both MMU enabled and non-MMU setups. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24m68k: remove duplicate asm offset for task thread.infoGreg Ungerer1-1/+1
We have a duplicate name and definition for the offset of the thread.info struct within the task struct in our asm-offsets.c code. Remove one of them, and consolidate to use a single define, TASK_INFO. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-24m68k: Fall back to __gpio_to_irq() for non-arch GPIOsMark Brown1-1/+2
gpiolib provides __gpio_to_irq() to map gpiolib gpios to interrupts - hook that up on m68k. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+3
Conflicts: net/bluetooth/l2cap_core.c Just two overlapping changes, one added an initialization of a local variable, and another change added a new local variable. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-22Merge branch 'master' into pm-sleepRafael J. Wysocki1-1/+3
* master: (848 commits) SELinux: Fix RCU deref check warning in sel_netport_insert() binary_sysctl(): fix memory leak mm/vmalloc.c: remove static declaration of va from __get_vm_area_node ipmi_watchdog: restore settings when BMC reset oom: fix integer overflow of points in oom_badness memcg: keep root group unchanged if creation fails nilfs2: potential integer overflow in nilfs_ioctl_clean_segments() nilfs2: unbreak compat ioctl cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask evm: prevent racing during tfm allocation evm: key must be set once during initialization mmc: vub300: fix type of firmware_rom_wait_states module parameter Revert "mmc: enable runtime PM by default" mmc: sdhci: remove "state" argument from sdhci_suspend_host x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT IB/qib: Correct sense on freectxts increment and decrement RDMA/cma: Verify private data length cgroups: fix a css_set not found bug in cgroup_attach_proc oprofile: Fix uninitialized memory access when writing to writing to oprofilefs Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel" ... Conflicts: kernel/cgroup_freezer.c
2011-12-10m68k: Don't comment out syscalls used by glibcAndreas Schwab1-5/+5
Define again the syscalls that are used by glibc so that it is possible to compile a feature-complete glibc with the newest kernel headers. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/atari: Move declaration of atari_SCC_reset_done to header fileGeert Uytterhoeven1-0/+2
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/hp300: Export hp300_ledstateGeert Uytterhoeven1-4/+4
The accidental loss of CONFIG_DIO in commit 0e152d80507b75c00aac60f2ffc586360687cd52 ("m68k: reorganize Kconfig options to improve mmu/non-mmu selections") exposed a missing symbol export in m68k allmodconfig. If CONFIG_HP300=y but CONFIG_HPLANCE (which is bool, and depends on CONFIG_DIO) is not set, and CONFIG_MVME147=y and CONFIG_MVME147_NET=m, 7990.c is compiled as a module, giving: ERROR: "ledstate" [drivers/net/ethernet/amd/7990.ko] undefined! Add the missing export, and rename ledstate to hp300_ledstate while we're at it, as it's a too generic name. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: cleanup macro caseFinn Thain1-1/+1
Code style convention has macro names in uppercase. Change MAC_VIA_IIci to MAC_VIA_IICI. Also remove an obsolete comment. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: oss irq fixesFinn Thain2-22/+3
The IOP driver calls into the OSS driver to enable its IRQ. This undesirable coupling between drivers only exists because the OSS driver doesn't correctly handle all of its machspec IRQs. Fix OSS handling of enable/disable for VIA1 IRQs (8 thru 15) which includes MAC_IRQ_ADB. Back when I implemented pmac_zilog support I redefined IRQ_MAC_SCC incorrectly. Change this to a machspec IRQ so that it works on OSS. Clean up the unused OSS audio IRQ and OSS_IRQLEV_* cruft that only confuses things. Fix the OSS description in macints.c and remove an obsolete comment. Don't enable the VIA1 irq before registering the handler. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: fix nubus slot irq disable and shutdownFinn Thain1-0/+2
Improve NuBus slot interrupt handling code and documentation. This patch fixes the NuBus NIC (mac8390) in my Quadra 700. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: cleanup forward declarationsFinn Thain6-6/+21
Move some forward declarations into header files and adjust includes. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: cleanup mac_irq_pendingFinn Thain2-1/+3
mac_irq_pending() has only one caller (mac_esp.c). Nothing tests for Baboon, PSC or OSS pending interrupts. Until that need arises, let's keep it simple and remove all the unused abstraction. Replace it with a routine to check for SCSI DRQ. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/serial: SERIAL_PORT_DFNS only if CONFIG_ISAKars de Jong1-0/+2
Only define SERIAL_PORT_DFNS when CONFIG_ISA is defined. Otherwise the first 4 slots in the 8250 driver are unavailable on non-ISA machines. Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 07:07:39 +0300