| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Most LoongArch 64 machines are using custom "SADR" ACPI extension to
perform ACPI S3 sleep. However the standard ACPI way to perform sleep
is to write a value to ACPI PM1/SLEEP_CTL register, and this is never
supported properly in kernel.
Add standard S3 sleep by providing a default DoSuspend function which
calls ACPI's acpi_enter_sleep_state() routine when SADR is not provided
by the firmware.
Also fix suspend assembly code so that ra is set properly before go
into sleep routine. (Previously linked address of jirl was set to a0,
some firmware do require return address in a0 but it's already set with
la.pcrel before).
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add architectural preparation for CPUFreq driver, including: Kconfig,
register definition and platform device registration.
Some of LoongArch processors support DVFS, their IOCSR.FEATURES has
IOCSRF_FREQSCALE set. And they has a micro-core in the package called
SMC (System Management Controller) to scale frequency, voltage, etc.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Currently, only TLB-based ioremap() support writecombine, so add the
counterpart for DMW-based ioremap() with help of DMW2. The base address
(WRITECOMBINE_BASE) is configured as 0xa000000000000000.
DMW3 is unused by kernel now, however firmware may leave garbage in them
and interfere kernel's address mapping. So clear it as necessary.
BTW, centralize the DMW configuration to macro SETUP_DMWINS.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In the current code, SMP is selected in Kconfig for LoongArch, the users
can not unset it, this is reasonable for a multi-processor machine. But
as the help info of config SMP said, if you have a system with only one
CPU, say N. On a uni-processor machine, the kernel will run faster if you
say N here.
Loongson-2K0500 is a single-core CPU for applications like industrial
control, printing terminals, and BMC (Baseboard Management Controller),
there are many development boards, products and solutions on the market,
so it is better and necessary to give a chance to build with !CONFIG_SMP
for a uni-processor machine.
First of all, do not select SMP for config LOONGARCH in Kconfig to make
it possible to unset CONFIG_SMP. Then, do some changes to fix warnings
and errors if CONFIG_SMP is not set.
(1) Define get_ipi_irq() only if CONFIG_SMP is set to fix the warning:
arch/loongarch/kernel/irq.c:90:19: warning: 'get_ipi_irq' defined but not used [-Wunused-function]
(2) Add "#ifdef CONFIG_SMP" in asm/smp.h to fix the warning:
./arch/loongarch/include/asm/smp.h:49:9: warning: "raw_smp_processor_id" redefined
49 | #define raw_smp_processor_id raw_smp_processor_id
| ^~~~~~~~~~~~~~~~~~~~
./include/linux/smp.h:198:9: note: this is the location of the previous definition
198 | #define raw_smp_processor_id() 0
(3) Define machine_shutdown() as empty under !CONFIG_SMP to fix the error:
arch/loongarch/kernel/machine_kexec.c: In function 'machine_shutdown':
arch/loongarch/kernel/machine_kexec.c:233:25: error: implicit declaration of function 'cpu_device_up'; did you mean 'put_device'? [-Wimplicit-function-declaration]
(4) Make config SCHED_SMT depends on SMP to fix many errors such as:
kernel/sched/core.c: In function 'sched_core_find':
kernel/sched/core.c:310:43: error: 'struct rq' has no member named 'cpu'
(5) Define cpu_logical_map(cpu) as 0 under !CONFIG_SMP in asm/smp.h,
then include asm/smp.h in asm/acpi.h (because acpi.h is included in
linux/irq.h indirectly) to fix many build errors under drivers/irqchip
such as:
drivers/irqchip/irq-loongson-eiointc.c: In function 'cpu_to_eio_node':
drivers/irqchip/irq-loongson-eiointc.c:59:16: error: implicit declaration of function 'cpu_logical_map' [-Wimplicit-function-declaration]
(6) Do not write per_cpu_offset(0) to PERCPU_BASE_KS when resume because
the per_cpu_offset(x) macro is defined as (__per_cpu_offset[x]) only
under CONFIG_SMP in include/asm-generic/percpu.h. Just save the value of
PERCPU_BASE_KS when suspend and restore it when resume to fix the error:
arch/loongarch/power/suspend.c: In function 'loongarch_common_resume':
arch/loongarch/power/suspend.c:47:21: error: implicit declaration of function 'per_cpu_offset' [-Wimplicit-function-declaration]
(7) Fix huge page handling under !CONFIG_SMP in tlbex.S.
When running the UnixBench tests with "-c 1" single-streamed pass, the
improvement of performance is about 9 percent with this patch.
By the way, it is helpful to debug and analysis the kernel issues of
multi-processor system under !CONFIG_SMP.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some PMC (Power Management Controllers) need to support DTS and will use
the suspend interfaces thus this patch was to export such interfaces for
their use.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some firmwares don't enable PG when wakeup from suspend, so do it in
kernel. This can improve code compatibility for boot kernel.
Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs directly.
This is a preparation for subsequent patches.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add hibernation (Suspend to Disk, aka ACPI S4) support for LoongArch.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add suspend (Suspend To RAM, aka ACPI S3) support for LoongArch.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
