summaryrefslogtreecommitdiff
path: root/arch/ia64
AgeCommit message (Collapse)AuthorFilesLines
2020-04-11mm/memory_hotplug: add pgprot_t to mhp_paramsLogan Gunthorpe1-0/+3
devm_memremap_pages() is currently used by the PCI P2PDMA code to create struct page mappings for IO memory. At present, these mappings are created with PAGE_KERNEL which implies setting the PAT bits to be WB. However, on x86, an mtrr register will typically override this and force the cache type to be UC-. In the case firmware doesn't set this register it is effectively WB and will typically result in a machine check exception when it's accessed. Other arches are not currently likely to function correctly seeing they don't have any MTRR registers to fall back on. To solve this, provide a way to specify the pgprot value explicitly to arch_add_memory(). Of the arches that support MEMORY_HOTPLUG: x86_64, and arm64 need a simple change to pass the pgprot_t down to their respective functions which set up the page tables. For x86_32, set the page tables explicitly using _set_memory_prot() (seeing they are already mapped). For ia64, s390 and sh, reject anything but PAGE_KERNEL settings -- this should be fine, for now, seeing these architectures don't support ZONE_DEVICE. A check in __add_pages() is also added to ensure the pgprot parameter was set for all arches. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Badger <ebadger@gigaio.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200306170846.9333-7-logang@deltatee.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-11mm/memory_hotplug: rename mhp_restrictions to mhp_paramsLogan Gunthorpe1-2/+2
The mhp_restrictions struct really doesn't specify anything resembling a restriction anymore so rename it to be mhp_params as it is a list of extended parameters. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Badger <ebadger@gigaio.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200306170846.9333-3-logang@deltatee.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-11mm/special: create generic fallbacks for pte_special() and pte_mkspecial()Anshuman Khandual1-2/+0
Currently there are many platforms that dont enable ARCH_HAS_PTE_SPECIAL but required to define quite similar fallback stubs for special page table entry helpers such as pte_special() and pte_mkspecial(), as they get build in generic MM without a config check. This creates two generic fallback stub definitions for these helpers, eliminating much code duplication. mips platform has a special case where pte_special() and pte_mkspecial() visibility is wider than what ARCH_HAS_PTE_SPECIAL enablement requires. This restricts those symbol visibility in order to avoid redefinitions which is now exposed through this new generic stubs and subsequent build failure. arm platform set_pte_at() definition needs to be moved into a C file just to prevent a build failure. [anshuman.khandual@arm.com: use defined(CONFIG_ARCH_HAS_PTE_SPECIAL) in mips per Thomas] Link: http://lkml.kernel.org/r/1583851924-21603-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Guo Ren <guoren@kernel.org> [csky] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Stafford Horne <shorne@gmail.com> [openrisc] Acked-by: Helge Deller <deller@gmx.de> [parisc] Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Brian Cain <bcain@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Sam Creasey <sammy@sammy.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paulburton@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Link: http://lkml.kernel.org/r/1583802551-15406-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-11mm/vma: define a default value for VM_DATA_DEFAULT_FLAGSAnshuman Khandual1-4/+1
There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the existing VM_STACK_DEFAULT_FLAGS. While here, also define some more macros with standard VMA access flag combinations that are used frequently across many platforms. Apart from simplification, this reduces code duplication as well. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Salter <msalter@redhat.com> Cc: Guo Ren <guoren@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Brian Cain <bcain@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paulburton@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net> Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07kasan: stackdepot: move filter_irq_stacks() to stackdepot.cAlexander Potapenko1-0/+2
filter_irq_stacks() can be used by other tools (e.g. KMSAN), so it needs to be moved to a common location. lib/stackdepot.c seems a good place, as filter_irq_stacks() is usually applied to the output of stack_trace_save(). This patch has been previously mailed as part of KMSAN RFC patch series. [glider@google.co: nds32: linker script: add SOFTIRQENTRY_TEXT\ Link: http://lkml.kernel.org/r/20200311121002.241430-1-glider@google.com [glider@google.com: add IRQENTRY_TEXT and SOFTIRQENTRY_TEXT to linker script] Link: http://lkml.kernel.org/r/20200311121124.243352-1-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Link: http://lkml.kernel.org/r/20200220141916.55455-3-glider@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07asm-generic: fix unistd_32.h generation formatMichal Simek1-1/+1
Generated files are also checked by sparse that's why add newline to remove sparse (C=1) warning. The issue was found on Microblaze and reported like this: ./arch/microblaze/include/generated/uapi/asm/unistd_32.h:438:45: warning: no newline at end of file Mips and PowerPC have it already but let's align with style used by m68k. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Stefan Asserhall <stefan.asserhall@xilinx.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> (xtensa) Cc: Arnd Bergmann <arnd@arndb.de> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Zankel <chris@zankel.net> Cc: David S. Miller <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paulburton@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Tony Luck <tony.luck@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/4d32ab4e1fb2edb691d2e1687e8fb303c09fd023.1581504803.git.michal.simek@xilinx.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-03Merge tag 'char-misc-5.7-rc1' of ↵Linus Torvalds5-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ...
2020-04-03Merge tag 'spdx-5.7-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
2020-04-03Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-1/+0
Pull SCSI updates from James Bottomley: "This series has a huge amount of churn because it pulls in Mauro's doc update changing all our txt files to rst ones. Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and some other minor updates. The major core change is Hannes moving functions out of the aacraid driver and into the core" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits) scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code scsi: ufs: Do not rely on prefetched data scsi: dc395x: remove dc395x_bios_param scsi: libiscsi: Fix error count for active session scsi: hpsa: correct race condition in offload enabled scsi: message: fusion: Replace zero-length array with flexible-array member scsi: qedi: Add PCI shutdown handler support scsi: qedi: Add MFW error recovery process scsi: ufs: Enable block layer runtime PM for well-known logical units scsi: ufs-qcom: Override devfreq parameters scsi: ufshcd: Let vendor override devfreq parameters scsi: ufshcd: Update the set frequency to devfreq scsi: ufs: Resume ufs host before accessing ufs device scsi: ufs-mediatek: customize the delay for enabling host scsi: ufs: make HCE polling more compact to improve initialization latency scsi: ufs: allow custom delay prior to host enabling scsi: ufs-mediatek: use common delay function scsi: ufs: introduce common and flexible delay function scsi: ufs: use an enum for host capabilities scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc() ...
2020-04-02mm: allow VM_FAULT_RETRY for multiple timesPeter Xu1-1/+0
The idea comes from a discussion between Linus and Andrea [1]. Before this patch we only allow a page fault to retry once. We achieved this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing handle_mm_fault() the second time. This was majorly used to avoid unexpected starvation of the system by looping over forever to handle the page fault on a single page. However that should hardly happen, and after all for each code path to return a VM_FAULT_RETRY we'll first wait for a condition (during which time we should possibly yield the cpu) to happen before VM_FAULT_RETRY is really returned. This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY flag when we receive VM_FAULT_RETRY. It means that the page fault handler now can retry the page fault for multiple times if necessary without the need to generate another page fault event. Meanwhile we still keep the FAULT_FLAG_TRIED flag so page fault handler can still identify whether a page fault is the first attempt or not. Then we'll have these combinations of fault flags (only considering ALLOW_RETRY flag and TRIED flag): - ALLOW_RETRY and !TRIED: this means the page fault allows to retry, and this is the first try - ALLOW_RETRY and TRIED: this means the page fault allows to retry, and this is not the first try - !ALLOW_RETRY and !TRIED: this means the page fault does not allow to retry at all - !ALLOW_RETRY and TRIED: this is forbidden and should never be used In existing code we have multiple places that has taken special care of the first condition above by checking against (fault_flags & FAULT_FLAG_ALLOW_RETRY). This patch introduces a simple helper to detect the first retry of a page fault by checking against both (fault_flags & FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now even the 2nd try will have the ALLOW_RETRY set, then use that helper in all existing special paths. One example is in __lock_page_or_retry(), now we'll drop the mmap_sem only in the first attempt of page fault and we'll keep it in follow up retries, so old locking behavior will be retained. This will be a nice enhancement for current code [2] at the same time a supporting material for the future userfaultfd-writeprotect work, since in that work there will always be an explicit userfault writeprotect retry for protected pages, and if that cannot resolve the page fault (e.g., when userfaultfd-writeprotect is used in conjunction with swapped pages) then we'll possibly need a 3rd retry of the page fault. It might also benefit other potential users who will have similar requirement like userfault write-protection. GUP code is not touched yet and will be covered in follow up patch. Please read the thread below for more information. [1] https://lore.kernel.org/lkml/20171102193644.GB22686@redhat.com/ [2] https://lore.kernel.org/lkml/20181230154648.GB9832@redhat.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Brian Geffon <bgeffon@google.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Matthew Wilcox <willy@infradead.org> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Link: http://lkml.kernel.org/r/20200220160246.9790-1-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02mm: introduce FAULT_FLAG_DEFAULTPeter Xu1-1/+1
Although there're tons of arch-specific page fault handlers, most of them are still sharing the same initial value of the page fault flags. Say, merely all of the page fault handlers would allow the fault to be retried, and they also allow the fault to respond to SIGKILL. Let's define a default value for the fault flags to replace those initial page fault flags that were copied over. With this, it'll be far easier to introduce new fault flag that can be used by all the architectures instead of touching all the archs. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Brian Geffon <bgeffon@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Matthew Wilcox <willy@infradead.org> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Link: http://lkml.kernel.org/r/20200220160238.9694-1-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02mm: introduce fault_signal_pending()Peter Xu1-1/+1
For most architectures, we've got a quick path to detect fatal signal after a handle_mm_fault(). Introduce a helper for that quick path. It cleans the current codes a bit so we don't need to duplicate the same check across archs. More importantly, this will be an unified place that we handle the signal immediately right after an interrupted page fault, so it'll be much easier for us if we want to change the behavior of handling signals later on for all the archs. Note that currently only part of the archs are using this new helper, because some archs have their own way to handle signals. In the follow up patches, we'll try to apply this helper to all the rest of archs. Another note is that the "regs" parameter in the new helper is not used yet. It'll be used very soon. Now we kept it in this patch only to avoid touching all the archs again in the follow up patches. [peterx@redhat.com: fix sparse warnings] Link: http://lkml.kernel.org/r/20200311145921.GD479302@xz-x1 Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Brian Geffon <bgeffon@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Matthew Wilcox <willy@infradead.org> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Link: http://lkml.kernel.org/r/20200220155353.8676-4-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02asm-generic: make more kernel-space headers mandatoryMasahiro Yamada1-7/+0
Change a header to mandatory-y if both of the following are met: [1] At least one architecture (except um) specifies it as generic-y in arch/*/include/asm/Kbuild [2] Every architecture (except um) either has its own implementation (arch/*/include/asm/*.h) or specifies it as generic-y in arch/*/include/asm/Kbuild This commit was generated by the following shell script. ----------------------------------->8----------------------------------- arches=$(cd arch; ls -1 | sed -e '/Kconfig/d' -e '/um/d') tmpfile=$(mktemp) grep "^mandatory-y +=" include/asm-generic/Kbuild > $tmpfile find arch -path 'arch/*/include/asm/Kbuild' | xargs sed -n 's/^generic-y += \(.*\)/\1/p' | sort -u | while read header do mandatory=yes for arch in $arches do if ! grep -q "generic-y += $header" arch/$arch/include/asm/Kbuild && ! [ -f arch/$arch/include/asm/$header ]; then mandatory=no break fi done if [ "$mandatory" = yes ]; then echo "mandatory-y += $header" >> $tmpfile for arch in $arches do sed -i "/generic-y += $header/d" arch/$arch/include/asm/Kbuild done fi done sed -i '/^mandatory-y +=/d' include/asm-generic/Kbuild LANG=C sort $tmpfile >> include/asm-generic/Kbuild ----------------------------------->8----------------------------------- One obvious benefit is the diff stat: 25 files changed, 52 insertions(+), 557 deletions(-) It is tedious to list generic-y for each arch that needs it. So, mandatory-y works like a fallback default (by just wrapping asm-generic one) when arch does not have a specific header implementation. See the following commits: def3f7cefe4e81c296090e1722a76551142c227c a1b39bae16a62ce4aae02d958224f19316d98b24 It is tedious to convert headers one by one, so I processed by a shell script. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/20200210175452.5030-1-masahiroy@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-31Merge tag 'please-pull-ia64_for_5.7' of ↵Linus Torvalds6-80/+39
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 updates from Tony Luck: "Couple of cleanup patches" * tag 'please-pull-ia64_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: tty/serial: cleanup after ioc*_serial driver removal ia64: replace setup_irq() by request_irq()
2020-03-31Merge tag 'smp-core-2020-03-30' of ↵Linus Torvalds1-7/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core SMP updates from Thomas Gleixner: "CPU (hotplug) updates: - Support for locked CSD objects in smp_call_function_single_async() which allows to simplify callsites in the scheduler core and MIPS - Treewide consolidation of CPU hotplug functions which ensures the consistency between the sysfs interface and kernel state. The low level functions cpu_up/down() are now confined to the core code and not longer accessible from random code" * tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) cpu/hotplug: Ignore pm_wakeup_pending() for disable_nonboot_cpus() cpu/hotplug: Hide cpu_up/down() cpu/hotplug: Move bringup of secondary CPUs out of smp_init() torture: Replace cpu_up/down() with add/remove_cpu() firmware: psci: Replace cpu_up/down() with add/remove_cpu() xen/cpuhotplug: Replace cpu_up/down() with device_online/offline() parisc: Replace cpu_up/down() with add/remove_cpu() sparc: Replace cpu_up/down() with add/remove_cpu() powerpc: Replace cpu_up/down() with add/remove_cpu() x86/smp: Replace cpu_up/down() with add/remove_cpu() arm64: hibernate: Use bringup_hibernate_cpu() cpu/hotplug: Provide bringup_hibernate_cpu() arm64: Use reboot_cpu instead of hardconding it to 0 arm64: Don't use disable_nonboot_cpus() ARM: Use reboot_cpu instead of hardcoding it to 0 ARM: Don't use disable_nonboot_cpus() ia64: Replace cpu_down() with smp_shutdown_nonboot_cpus() cpu/hotplug: Create a new function to shutdown nonboot cpus cpu/hotplug: Add new {add,remove}_cpu() functions sched/core: Remove rq.hrtick_csd_pending ...
2020-03-31Merge branch 'locking-core-for-linus' of ↵Linus Torvalds4-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle were: - Continued user-access cleanups in the futex code. - percpu-rwsem rewrite that uses its own waitqueue and atomic_t instead of an embedded rwsem. This addresses a couple of weaknesses, but the primary motivation was complications on the -rt kernel. - Introduce raw lock nesting detection on lockdep (CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal lock differences. This too originates from -rt. - Reuse lockdep zapped chain_hlocks entries, to conserve RAM footprint on distro-ish kernels running into the "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep chain-entries pool. - Misc cleanups, smaller fixes and enhancements - see the changelog for details" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits) fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t Documentation/locking/locktypes: Minor copy editor fixes Documentation/locking/locktypes: Further clarifications and wordsmithing m68knommu: Remove mm.h include from uaccess_no.h x86: get rid of user_atomic_cmpxchg_inatomic() generic arch_futex_atomic_op_inuser() doesn't need access_ok() x86: don't reload after cmpxchg in unsafe_atomic_op2() loop x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end() objtool: whitelist __sanitizer_cov_trace_switch() [parisc, s390, sparc64] no need for access_ok() in futex handling sh: no need of access_ok() in arch_futex_atomic_op_inuser() futex: arch_futex_atomic_op_inuser() calling conventions change completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all() lockdep: Add posixtimer context tracing bits lockdep: Annotate irq_work lockdep: Add hrtimer context tracing bits lockdep: Introduce wait-type checks completion: Use simple wait queues sched/swait: Prepare usage in completions ...
2020-03-28Merge branch 'uaccess.futex' of ↵Thomas Gleixner1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into locking/core Pull uaccess futex cleanups for Al Viro: Consolidate access_ok() usage and the futex uaccess function zoo.
2020-03-28futex: arch_futex_atomic_op_inuser() calling conventions changeAl Viro1-3/+2
Move access_ok() in and pagefault_enable()/pagefault_disable() out. Mechanical conversion only - some instances don't really need a separate access_ok() at all (e.g. the ones only using get_user()/put_user(), or architectures where access_ok() is always true); we'll deal with that in followups. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-03-25ia64: Replace cpu_down() with smp_shutdown_nonboot_cpus()Qais Yousef1-7/+1
Use the new smp_shutdown_nonboot_cpus() instead of using cpu_down() directly. Use reboot_cpu instead of hardcoding the boot CPU to 0. This also prepares to make cpu_up/down() a private interface of the CPU subsystem. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Link: https://lkml.kernel.org/r/20200323135110.30522-4-qais.yousef@arm.com
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada1-0/+1
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21ia64: Remove mm.h from asm/uaccess.hSebastian Andrzej Siewior3-1/+2
The defconfig compiles without linux/mm.h. With mm.h included the include chain leands to: | CC kernel/locking/percpu-rwsem.o | In file included from include/linux/huge_mm.h:8, | from include/linux/mm.h:567, | from arch/ia64/include/asm/uaccess.h:, | from include/linux/uaccess.h:11, | from include/linux/sched/task.h:11, | from include/linux/sched/signal.h:9, | from include/linux/rcuwait.h:6, | from include/linux/percpu-rwsem.h:8, | from kernel/locking/percpu-rwsem.c:6: | include/linux/fs.h:1422:29: error: array type has incomplete element type 'struct percpu_rw_semaphore' | 1422 | struct percpu_rw_semaphore rw_sem[SB_FREEZE_LEVELS]; once rcuwait.h includes linux/sched/signal.h. Remove the linux/mm.h include. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200321113241.624070289@linutronix.de
2020-03-19rtc/ia64: remove legacy efirtc driverArnd Bergmann5-5/+10
There are two EFI RTC drivers, the original drivers/char/efirtc.c driver and the more modern drivers/rtc/rtc-efi.c. Both implement the same interface, but the new one does so in a more portable way. Move everything over to that one and remove the old one. Cc: linux-ia64@vger.kernel.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Stephane Eranian <eranian@google.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200226224322.187960-1-alexandre.belloni@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-14ia64: replace setup_irq() by request_irq()afzal mohammed6-80/+39
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). Changing 'ia64_native_register_percpu_irq' decleration to include 'irq_handler_t' as an argument type in arch/ia64/include/asm/hw_irq.h was causing build error - 'unknown type name 'irq_handler_t'' This was due to below header file sequence, + include/interrupt.h + include/hardirq.h + asm/hardirq.h + include/irq.h + asm/hw_irq.h [ 'ia64_native_register_percpu_irq' declared w/ 'irq_handler_t'] [ 'irq_handler_t' typedef'ed here in 'include/interrupt.h'] 'register_percpu_irq' defined to 'ia64_native_register_percpu_irq' is the one invoked by the caller, not the latter directly. This was done to support paravirtualization which was removed around 4 years back. And 'register_percpu_irq' is invoked only inside 'arch/ia64/kernel'. So 'register_percpu_irq' define to 'ia64_native_register_percpu_irq' is removed, instead 'ia64_native_register_percpu_irq' is renamed to 'register_precpu_irq()' & it is directly invoked. Also, 'register_precpu_irq()' is declared in a new header file 'irq.h' inside 'arch/ia64/kernel/', this header file is included by C files invoking 'register_percpu_irq()'. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2020-02-24scsi: sr: remove references to BLK_DEV_SR_VENDOR, leave it enabledDiego Elio Pettenò1-1/+0
This kernel configuration is basically enabling/disabling sr driver quirks detection. While these quirks are for fairly rare devices (very old CD burners, and a glucometer), the additional detection of these models is a very minimal amount of code. The logic behind the quirks is always built into the sr driver. This also removes the config from all the defconfig files that are enabling this already. Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.com Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-23efi: Clean up config_parse_tables()Ard Biesheuvel1-2/+1
config_parse_tables() is a jumble of pointer arithmetic, due to the fact that on x86, we may be dealing with firmware whose native word size differs from the kernel's. This is not a concern on other architectures, and doesn't quite justify the state of the code, so let's clean it up by adding a non-x86 code path, constifying statically allocated tables and replacing preprocessor conditionals with IS_ENABLED() checks. Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64 Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-02-23efi/ia64: Switch to efi_config_parse_tables()Ard Biesheuvel1-1/+4
IA64 calls efi_config_parse_tables() via efi_config_init(), which does an explicit memremap() of the tables, which is unnecessary on IA64. So let's call efi_config_parse_tables() directly, passing the __va() of the config table array. Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64 Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-02-23efi/ia64: Use local variable for EFI system table addressArd Biesheuvel1-5/+6
The IA64 code never refers to the EFI system table except from inside the scope of efi_init(). So let's use a local variable instead of efi.systab, which will be going away soon. Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64 Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-02-23efi/ia64: Use existing helpers to locate ESI tableArd Biesheuvel2-17/+10
Instead of iterating over the EFI config table array manually, declare it as an arch table so it gets picked up by the existing config table handling code. Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64 Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-02-23efi: Merge EFI system table revision and vendor checksArd Biesheuvel1-20/+3
We have three different versions of the code that checks the EFI system table revision and copies the firmware vendor string, and they are mostly equivalent, with the exception of the use of early_memremap_ro vs. __va() and the lowest major revision to warn about. Let's move this into common code and factor out the commonalities. Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64 Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-02-23efi/ia64: Move HCDP and MPS table handling into IA64 arch codeArd Biesheuvel1-0/+13
The HCDP and MPS tables are Itanium specific EFI config tables, so move their handling to ia64 arch code. Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64 Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan1-12/+12
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-30Merge tag 'threads-v5.6' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull thread management updates from Christian Brauner: "Sargun Dhillon over the last cycle has worked on the pidfd_getfd() syscall. This syscall allows for the retrieval of file descriptors of a process based on its pidfd. A task needs to have ptrace_may_access() permissions with PTRACE_MODE_ATTACH_REALCREDS (suggested by Oleg and Andy) on the target. One of the main use-cases is in combination with seccomp's user notification feature. As a reminder, seccomp's user notification feature was made available in v5.0. It allows a task to retrieve a file descriptor for its seccomp filter. The file descriptor is usually handed of to a more privileged supervising process. The supervisor can then listen for syscall events caught by the seccomp filter of the supervisee and perform actions in lieu of the supervisee, usually emulating syscalls. pidfd_getfd() is needed to expand its uses. There are currently two major users that wait on pidfd_getfd() and one future user: - Netflix, Sargun said, is working on a service mesh where users should be able to connect to a dns-based VIP. When a user connects to e.g. 1.2.3.4:80 that runs e.g. service "foo" they will be redirected to an envoy process. This service mesh uses seccomp user notifications and pidfd to intercept all connect calls and instead of connecting them to 1.2.3.4:80 connects them to e.g. 127.0.0.1:8080. - LXD uses the seccomp notifier heavily to intercept and emulate mknod() and mount() syscalls for unprivileged containers/processes. With pidfd_getfd() more uses-cases e.g. bridging socket connections will be possible. - The patchset has also seen some interest from the browser corner. Right now, Firefox is using a SECCOMP_RET_TRAP sandbox managed by a broker process. In the future glibc will start blocking all signals during dlopen() rendering this type of sandbox impossible. Hence, in the future Firefox will switch to a seccomp-user-nofication based sandbox which also makes use of file descriptor retrieval. The thread for this can be found at https://sourceware.org/ml/libc-alpha/2019-12/msg00079.html With pidfd_getfd() it is e.g. possible to bridge socket connections for the supervisee (binding to a privileged port) and taking actions on file descriptors on behalf of the supervisee in general. Sargun's first version was using an ioctl on pidfds but various people pushed for it to be a proper syscall which he duely implemented as well over various review cycles. Selftests are of course included. I've also added instructions how to deal with merge conflicts below. There's also a small fix coming from the kernel mentee project to correctly annotate struct sighand_struct with __rcu to fix various sparse warnings. We've received a few more such fixes and even though they are mostly trivial I've decided to postpone them until after -rc1 since they came in rather late and I don't want to risk introducing build warnings. Finally, there's a new prctl() command PR_{G,S}ET_IO_FLUSHER which is needed to avoid allocation recursions triggerable by storage drivers that have userspace parts that run in the IO path (e.g. dm-multipath, iscsi, etc). These allocation recursions deadlock the device. The new prctl() allows such privileged userspace components to avoid allocation recursions by setting the PF_MEMALLOC_NOIO and PF_LESS_THROTTLE flags. The patch carries the necessary acks from the relevant maintainers and is routed here as part of prctl() thread-management." * tag 'threads-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: prctl: PR_{G,S}ET_IO_FLUSHER to support controlling memory reclaim sched.h: Annotate sighand_struct with __rcu test: Add test for pidfd getfd arch: wire up pidfd_getfd syscall pid: Implement pidfd_getfd syscall vfs, fdtable: Add fget_task helper
2020-01-29Merge branch 'work.openat2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull openat2 support from Al Viro: "This is the openat2() series from Aleksa Sarai. I'm afraid that the rest of namei stuff will have to wait - it got zero review the last time I'd posted #work.namei, and there had been a leak in the posted series I'd caught only last weekend. I was going to repost it on Monday, but the window opened and the odds of getting any review during that... Oh, well. Anyway, openat2 part should be ready; that _did_ get sane amount of review and public testing, so here it comes" From Aleksa's description of the series: "For a very long time, extending openat(2) with new features has been incredibly frustrating. This stems from the fact that openat(2) is possibly the most famous counter-example to the mantra "don't silently accept garbage from userspace" -- it doesn't check whether unknown flags are present[1]. This means that (generally) the addition of new flags to openat(2) has been fraught with backwards-compatibility issues (O_TMPFILE has to be defined as __O_TMPFILE|O_DIRECTORY|[O_RDWR or O_WRONLY] to ensure old kernels gave errors, since it's insecure to silently ignore the flag[2]). All new security-related flags therefore have a tough road to being added to openat(2). Furthermore, the need for some sort of control over VFS's path resolution (to avoid malicious paths resulting in inadvertent breakouts) has been a very long-standing desire of many userspace applications. This patchset is a revival of Al Viro's old AT_NO_JUMPS[3] patchset (which was a variant of David Drysdale's O_BENEATH patchset[4] which was a spin-off of the Capsicum project[5]) with a few additions and changes made based on the previous discussion within [6] as well as others I felt were useful. In line with the conclusions of the original discussion of AT_NO_JUMPS, the flag has been split up into separate flags. However, instead of being an openat(2) flag it is provided through a new syscall openat2(2) which provides several other improvements to the openat(2) interface (see the patch description for more details). The following new LOOKUP_* flags are added: LOOKUP_NO_XDEV: Blocks all mountpoint crossings (upwards, downwards, or through absolute links). Absolute pathnames alone in openat(2) do not trigger this. Magic-link traversal which implies a vfsmount jump is also blocked (though magic-link jumps on the same vfsmount are permitted). LOOKUP_NO_MAGICLINKS: Blocks resolution through /proc/$pid/fd-style links. This is done by blocking the usage of nd_jump_link() during resolution in a filesystem. The term "magic-links" is used to match with the only reference to these links in Documentation/, but I'm happy to change the name. It should be noted that this is different to the scope of ~LOOKUP_FOLLOW in that it applies to all path components. However, you can do openat2(NO_FOLLOW|NO_MAGICLINKS) on a magic-link and it will *not* fail (assuming that no parent component was a magic-link), and you will have an fd for the magic-link. In order to correctly detect magic-links, the introduction of a new LOOKUP_MAGICLINK_JUMPED state flag was required. LOOKUP_BENEATH: Disallows escapes to outside the starting dirfd's tree, using techniques such as ".." or absolute links. Absolute paths in openat(2) are also disallowed. Conceptually this flag is to ensure you "stay below" a certain point in the filesystem tree -- but this requires some additional to protect against various races that would allow escape using "..". Currently LOOKUP_BENEATH implies LOOKUP_NO_MAGICLINKS, because it can trivially beam you around the filesystem (breaking the protection). In future, there might be similar safety checks done as in LOOKUP_IN_ROOT, but that requires more discussion. In addition, two new flags are added that expand on the above ideas: LOOKUP_NO_SYMLINKS: Does what it says on the tin. No symlink resolution is allowed at all, including magic-links. Just as with LOOKUP_NO_MAGICLINKS this can still be used with NOFOLLOW to open an fd for the symlink as long as no parent path had a symlink component. LOOKUP_IN_ROOT: This is an extension of LOOKUP_BENEATH that, rather than blocking attempts to move past the root, forces all such movements to be scoped to the starting point. This provides chroot(2)-like protection but without the cost of a chroot(2) for each filesystem operation, as well as being safe against race attacks that chroot(2) is not. If a race is detected (as with LOOKUP_BENEATH) then an error is generated, and similar to LOOKUP_BENEATH it is not permitted to cross magic-links with LOOKUP_IN_ROOT. The primary need for this is from container runtimes, which currently need to do symlink scoping in userspace[7] when opening paths in a potentially malicious container. There is a long list of CVEs that could have bene mitigated by having RESOLVE_THIS_ROOT (such as CVE-2017-1002101, CVE-2017-1002102, CVE-2018-15664, and CVE-2019-5736, just to name a few). In order to make all of the above more usable, I'm working on libpathrs[8] which is a C-friendly library for safe path resolution. It features a userspace-emulated backend if the kernel doesn't support openat2(2). Hopefully we can get userspace to switch to using it, and thus get openat2(2) support for free once it's ready. Future work would include implementing things like RESOLVE_NO_AUTOMOUNT and possibly a RESOLVE_NO_REMOTE (to allow programs to be sure they don't hit DoSes though stale NFS handles)" * 'work.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Documentation: path-lookup: include new LOOKUP flags selftests: add openat2(2) selftests open: introduce openat2(2) syscall namei: LOOKUP_{IN_ROOT,BENEATH}: permit limited ".." resolution namei: LOOKUP_IN_ROOT: chroot-like scoped resolution namei: LOOKUP_BENEATH: O_BENEATH-like scoped resolution namei: LOOKUP_NO_XDEV: block mountpoint crossing namei: LOOKUP_NO_MAGICLINKS: block magic-link resolution namei: LOOKUP_NO_SYMLINKS: block symlink resolution namei: allow set_root() to produce errors namei: allow nd_jump_link() to produce errors nsfs: clean-up ns_get_path() signature to return int namei: only return -ECHILD from follow_dotdot_rcu()
2020-01-29Merge tag 'tty-5.6-rc1' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver updates for 5.6-rc1 Included in here are: - dummy_con cleanups (touches lots of arch code) - sysrq logic cleanups (touches lots of serial drivers) - samsung driver fixes (wasn't really being built) - conmakeshash move to tty subdir out of scripts - lots of small tty/serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: n_hdlc: Use flexible-array member and struct_size() helper tty: baudrate: SPARC supports few more baud rates tty: baudrate: Synchronise baud_table[] and baud_bits[] tty: serial: meson_uart: Add support for kernel debugger serial: imx: fix a race condition in receive path serial: 8250_bcm2835aux: Document struct bcm2835aux_data serial: 8250_bcm2835aux: Use generic remapping code serial: 8250_bcm2835aux: Allocate uart_8250_port on stack serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER serial: 8250_bcm2835aux: Fix line mismatch on driver unbind serial_core: Remove unused member in uart_port vt: Correct comment documenting do_take_over_console() vt: Delete comment referencing non-existent unbind_con_driver() arch/xtensa/setup: Drop dummy_con initialization arch/x86/setup: Drop dummy_con initialization arch/unicore32/setup: Drop dummy_con initialization arch/sparc/setup: Drop dummy_con initialization arch/sh/setup: Drop dummy_con initialization arch/s390/setup: Drop dummy_con initialization ...
2020-01-28Merge branch 'sched-core-for-linus' of ↵Linus Torvalds2-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "These were the main changes in this cycle: - More -rt motivated separation of CONFIG_PREEMPT and CONFIG_PREEMPTION. - Add more low level scheduling topology sanity checks and warnings to filter out nonsensical topologies that break scheduling. - Extend uclamp constraints to influence wakeup CPU placement - Make the RT scheduler more aware of asymmetric topologies and CPU capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y - Make idle CPU selection more consistent - Various fixes, smaller cleanups, updates and enhancements - please see the git log for details" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) sched/fair: Define sched_idle_cpu() only for SMP configurations sched/topology: Assert non-NUMA topology masks don't (partially) overlap idle: fix spelling mistake "iterrupts" -> "interrupts" sched/fair: Remove redundant call to cpufreq_update_util() sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP sched/fair: calculate delta runnable load only when it's needed sched/cputime: move rq parameter in irqtime_account_process_tick stop_machine: Make stop_cpus() static sched/debug: Reset watchdog on all CPUs while processing sysrq-t sched/core: Fix size of rq::uclamp initialization sched/uclamp: Fix a bug in propagating uclamp value in new cgroups sched/fair: Load balance aggressively for SCHED_IDLE CPUs sched/fair : Improve update_sd_pick_busiest for spare capacity case watchdog: Remove soft_lockup_hrtimer_cnt and related code sched/rt: Make RT capacity-aware sched/fair: Make EAS wakeup placement consider uclamp restrictions sched/fair: Make task_fits_capacity() consider uclamp restrictions sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with() sched/uclamp: Make uclamp util helpers use and return UL values ...
2020-01-28Merge branch 'efi-core-for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "The main changes in this cycle were: - Cleanup of the GOP [graphics output] handling code in the EFI stub - Complete refactoring of the mixed mode handling in the x86 EFI stub - Overhaul of the x86 EFI boot/runtime code - Increase robustness for mixed mode code - Add the ability to disable DMA at the root port level in the EFI stub - Get rid of RWX mappings in the EFI memory map and page tables, where possible - Move the support code for the old EFI memory mapping style into its only user, the SGI UV1+ support code. - plus misc fixes, updates, smaller cleanups. ... and due to interactions with the RWX changes, another round of PAT cleanups make a guest appearance via the EFI tree - with no side effects intended" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits) efi/x86: Disable instrumentation in the EFI runtime handling code efi/libstub/x86: Fix EFI server boot failure efi/x86: Disallow efi=old_map in mixed mode x86/boot/compressed: Relax sed symbol type regex for LLVM ld.lld efi/x86: avoid KASAN false positives when accessing the 1: 1 mapping efi: Fix handling of multiple efi_fake_mem= entries efi: Fix efi_memmap_alloc() leaks efi: Add tracking for dynamically allocated memmaps efi: Add a flags parameter to efi_memory_map efi: Fix comment for efi_mem_type() wrt absent physical addresses efi/arm: Defer probe of PCIe backed efifb on DT systems efi/x86: Limit EFI old memory map to SGI UV machines efi/x86: Avoid RWX mappings for all of DRAM efi/x86: Don't map the entire kernel text RW for mixed mode x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd efi/libstub/x86: Fix unused-variable warning efi/libstub/x86: Use mandatory 16-byte stack alignment in mixed mode efi/libstub/x86: Use const attribute for efi_is_64bit() efi: Allow disabling PCI busmastering on bridges during boot efi/x86: Allow translating 64-bit arguments for mixed mode calls ...
2020-01-28Merge branch 'core-headers-for-linus' of ↵Linus Torvalds2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull header cleanup from Ingo Molnar: "This is a treewide cleanup, mostly (but not exclusively) with x86 impact, which breaks implicit dependencies on the asm/realtime.h header and finally removes it from asm/acpi.h" * 'core-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ACPI/sleep: Move acpi_get_wakeup_address() into sleep.c, remove <asm/realmode.h> from <asm/acpi.h> ACPI/sleep: Convert acpi_wakeup_address into a function x86/ACPI/sleep: Remove an unnecessary include of asm/realmode.h ASoC: Intel: Skylake: Explicitly include linux/io.h for virt_to_phys() vmw_balloon: Explicitly include linux/io.h for virt_to_phys() virt: vbox: Explicitly include linux/io.h to pick up various defs efi/capsule-loader: Explicitly include linux/io.h for page_to_phys() perf/x86/intel: Explicitly include asm/io.h to use virt_to_phys() x86/kprobes: Explicitly include vmalloc.h for set_vm_flush_reset_perms() x86/ftrace: Explicitly include vmalloc.h for set_vm_flush_reset_perms() x86/boot: Explicitly include realmode.h to handle RM reservations x86/efi: Explicitly include realmode.h to handle RM trampoline quirk x86/platform/intel/quark: Explicitly include linux/io.h for virt_to_phys() x86/setup: Enhance the comments x86/setup: Clean up the header portion of setup.c
2020-01-18open: introduce openat2(2) syscallAleksa Sarai1-0/+1
/* Background. */ For a very long time, extending openat(2) with new features has been incredibly frustrating. This stems from the fact that openat(2) is possibly the most famous counter-example to the mantra "don't silently accept garbage from userspace" -- it doesn't check whether unknown flags are present[1]. This means that (generally) the addition of new flags to openat(2) has been fraught with backwards-compatibility issues (O_TMPFILE has to be defined as __O_TMPFILE|O_DIRECTORY|[O_RDWR or O_WRONLY] to ensure old kernels gave errors, since it's insecure to silently ignore the flag[2]). All new security-related flags therefore have a tough road to being added to openat(2). Userspace also has a hard time figuring out whether a particular flag is supported on a particular kernel. While it is now possible with contemporary kernels (thanks to [3]), older kernels will expose unknown flag bits through fcntl(F_GETFL). Giving a clear -EINVAL during openat(2) time matches modern syscall designs and is far more fool-proof. In addition, the newly-added path resolution restriction LOOKUP flags (which we would like to expose to user-space) don't feel related to the pre-existing O_* flag set -- they affect all components of path lookup. We'd therefore like to add a new flag argument. Adding a new syscall allows us to finally fix the flag-ignoring problem, and we can make it extensible enough so that we will hopefully never need an openat3(2). /* Syscall Prototype. */ /* * open_how is an extensible structure (similar in interface to * clone3(2) or sched_setattr(2)). The size parameter must be set to * sizeof(struct open_how), to allow for future extensions. All future * extensions will be appended to open_how, with their zero value * acting as a no-op default. */ struct open_how { /* ... */ }; int openat2(int dfd, const char *pathname, struct open_how *how, size_t size); /* Description. */ The initial version of 'struct open_how' contains the following fields: flags Used to specify openat(2)-style flags. However, any unknown flag bits or otherwise incorrect flag combinations (like O_PATH|O_RDWR) will result in -EINVAL. In addition, this field is 64-bits wide to allow for more O_ flags than currently permitted with openat(2). mode The file mode for O_CREAT or O_TMPFILE. Must be set to zero if flags does not contain O_CREAT or O_TMPFILE. resolve Restrict path resolution (in contrast to O_* flags they affect all path components). The current set of flags are as follows (at the moment, all of the RESOLVE_ flags are implemented as just passing the corresponding LOOKUP_ flag). RESOLVE_NO_XDEV => LOOKUP_NO_XDEV RESOLVE_NO_SYMLINKS => LOOKUP_NO_SYMLINKS RESOLVE_NO_MAGICLINKS => LOOKUP_NO_MAGICLINKS RESOLVE_BENEATH => LOOKUP_BENEATH RESOLVE_IN_ROOT => LOOKUP_IN_ROOT open_how does not contain an embedded size field, because it is of little benefit (userspace can figure out the kernel open_how size at runtime fairly easily without it). It also only contains u64s (even though ->mode arguably should be a u16) to avoid having padding fields which are never used in the future. Note that as a result of the new how->flags handling, O_PATH|O_TMPFILE is no longer permitted for openat(2). As far as I can tell, this has always been a bug and appears to not be used by userspace (and I've not seen any problems on my machines by disallowing it). If it turns out this breaks something, we can special-case it and only permit it for openat(2) but not openat2(2). After input from Florian Weimer, the new open_how and flag definitions are inside a separate header from uapi/linux/fcntl.h, to avoid problems that glibc has with importing that header. /* Testing. */ In a follow-up patch there are over 200 selftests which ensure that this syscall has the correct semantics and will correctly handle several attack scenarios. In addition, I've written a userspace library[4] which provides convenient wrappers around openat2(RESOLVE_IN_ROOT) (this is necessary because no other syscalls support RESOLVE_IN_ROOT, and thus lots of care must be taken when using RESOLVE_IN_ROOT'd file descriptors with other syscalls). During the development of this patch, I've run numerous verification tests using libpathrs (showing that the API is reasonably usable by userspace). /* Future Work. */ Additional RESOLVE_ flags have been suggested during the review period. These can be easily implemented separately (such as blocking auto-mount during resolution). Furthermore, there are some other proposed changes to the openat(2) interface (the most obvious example is magic-link hardening[5]) which would be a good opportunity to add a way for userspace to restrict how O_PATH file descriptors can be re-opened. Another possible avenue of future work would be some kind of CHECK_FIELDS[6] flag which causes the kernel to indicate to userspace which openat2(2) flags and fields are supported by the current kernel (to avoid userspace having to go through several guesses to figure it out). [1]: https://lwn.net/Articles/588444/ [2]: https://lore.kernel.org/lkml/CA+55aFyyxJL1LyXZeBsf2ypriraj5ut1XkNDsunRBqgVjZU_6Q@mail.gmail.com [3]: commit 629e014bb834 ("fs: completely ignore unknown open flags") [4]: https://sourceware.org/bugzilla/show_bug.cgi?id=17523 [5]: https://lore.kernel.org/lkml/20190930183316.10190-2-cyphar@cyphar.com/ [6]: https://youtu.be/ggD-eb3yPVs Suggested-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-01-14arch/ia64/setup: Drop dummy_con initializationArvind Sankar1-3/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-10-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13arch: wire up pidfd_getfd syscallSargun Dhillon1-0/+1
This wires up the pidfd_getfd syscall for all architectures. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200107175927.4558-4-sargun@sargun.me Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-01-10Merge branch 'x86/mm' into efi/core, to pick up dependenciesIngo Molnar1-0/+4
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig2-5/+5
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-01-05mm/memory_hotplug: shrink zones when offlining memoryDavid Hildenbrand1-3/+1
We currently try to shrink a single zone when removing memory. We use the zone of the first page of the memory we are removing. If that memmap was never initialized (e.g., memory was never onlined), we will read garbage and can trigger kernel BUGs (due to a stale pointer): BUG: unable to handle page fault for address: 000000000000353d #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ #317 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4 Workqueue: kacpi_hotplug acpi_hotplug_work_fn RIP: 0010:clear_zone_contiguous+0x5/0x10 Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840 RSP: 0018:ffffad2400043c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000 RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40 RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000 R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680 FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __remove_pages+0x4b/0x640 arch_remove_memory+0x63/0x8d try_remove_memory+0xdb/0x130 __remove_memory+0xa/0x11 acpi_memory_device_remove+0x70/0x100 acpi_bus_trim+0x55/0x90 acpi_device_hotplug+0x227/0x3a0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x221/0x550 worker_thread+0x50/0x3b0 kthread+0x105/0x140 ret_from_fork+0x3a/0x50 Modules linked in: CR2: 000000000000353d Instead, shrink the zones when offlining memory or when onlining failed. Introduce and use remove_pfn_range_from_zone(() for that. We now properly shrink the zones, even if we have DIMMs whereby - Some memory blocks fall into no zone (never onlined) - Some memory blocks fall into multiple zones (offlined+re-onlined) - Multiple memory blocks that fall into different zones Drop the zone parameter (with a potential dubious value) from __remove_pages() and __remove_section(). Link: http://lkml.kernel.org/r/20191006085646.5768-6-david@redhat.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319] Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: <stable@vger.kernel.org> [5.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-25Merge tag 'v5.5-rc3' into sched/core, to pick up fixesIngo Molnar5-79/+36
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-10ACPI/sleep: Convert acpi_wakeup_address into a functionSean Christopherson2-3/+4
Convert acpi_wakeup_address from a raw variable into a function so that x86 can wrap its dereference of the real mode boot header in a function instead of broadcasting it to the world via a #define. This sets the stage for a future patch to move x86's definition of the new function, acpi_get_wakeup_address(), out of asm/acpi.h and thus break acpi.h's dependency on asm/realmode.h. No functional change intended. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Link: https://lkml.kernel.org/r/20191126165417.22423-12-sean.j.christopherson@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-10mm/vmalloc: Add empty <asm/vmalloc.h> headers and use them from ↵Ingo Molnar1-0/+4
<linux/vmalloc.h> In the x86 MM code we'd like to untangle various types of historic header dependency spaghetti, but for this we'd need to pass to the generic vmalloc code various vmalloc related defines that customarily come via the <asm/page.h> low level arch header. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-08sched/rt, ia64: Use CONFIG_PREEMPTIONThomas Gleixner2-7/+7
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Switch the entry code and kprobes over to use CONFIG_PREEMPTION. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-ia64@vger.kernel.org Link: https://lore.kernel.org/r/20191015191821.11479-10-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-06Merge tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-2/+2
Pull more drm updates from Dave Airlie: "Rob pointed out I missed his pull request for msm-next, it's been in next for a while outside of my tree so shouldn't cause any unexpected issues, it has some OCMEM support in drivers/soc that is acked by other maintainers as it's outside my tree. Otherwise it's a usual fixes pull, i915, amdgpu, the main ones, with some tegra, omap, mgag200 and one core fix. Summary: msm-next: - OCMEM support for a3xx and a4xx GPUs. - a510 support + display support core: - mst payload deletion fix i915: - uapi alignment fix - fix for power usage regression due to security fixes - change default preemption timeout to 640ms from 100ms - EHL voltage level display fixes - TGL DGL PHY fix - gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning - CI spotted deadlock fix - EHL port D programming fix amdgpu: - VRAM lost fixes on BACO for CI/VI - navi14 DC fixes - misc SR-IOV, gfx10 fixes - XGMI fixes for arcturus - SRIOV fixes amdkfd: - KFD on ppc64le enabled - page table optimisations radeon: - fix for r1xx/2xx register checker. tegra: - displayport regression fixes - DMA API regression fixes mgag200: - fix devices that can't scanout except at 0 addr omap: - fix dma_addr refcounting" * tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm: (100 commits) drm/dp_mst: Correct the bug in drm_dp_update_payload_part1() drm/omap: fix dma_addr refcounting drm/tegra: Run hub cleanup on ->remove() drm/tegra: sor: Make the +5V HDMI supply optional drm/tegra: Silence expected errors on IOMMU attach drm/tegra: vic: Export module device table drm/tegra: sor: Implement system suspend/resume drm/tegra: Use proper IOVA address for cursor image drm/tegra: gem: Remove premature import restrictions drm/tegra: gem: Properly pin imported buffers drm/tegra: hub: Remove bogus connection mutex check ia64: agp: Replace empty define with do while agp: Add bridge parameter documentation agp: remove unused variable num_segments agp: move AGPGART_MINOR to include/linux/miscdevice.h agp: remove unused variable size in agp_generic_create_gatt_table drm/dp_mst: Fix build on systems with STACKTRACE_SUPPORT=n drm/radeon: fix r1xx/r2xx register checker for POT textures drm/amdgpu: fix GFX10 missing CSIB set(v3) drm/amdgpu: should stop GFX ring in hw_fini ...
2019-12-04Merge tag 'please-pull-misc-5.5' of ↵Linus Torvalds4-77/+34
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 update from Tony Luck: "Cleanup some leftover para-virtualization pieces" * tag 'please-pull-misc-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: ia64: remove stale paravirt leftovers
2019-12-04ia64: agp: Replace empty define with do whileCorentin Labbe1-2/+2
It's dangerous to use empty code define. Furthermore it lead to the following warning: drivers/char/agp/generic.c: In function « agp_generic_destroy_page »: drivers/char/agp/generic.c:1266:28: attention : suggest braces around empty body in an « if » statement [-Wempty-body] So let's replace emptyness by "do {} while(0)" Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1574324085-4338-6-git-send-email-clabbe@baylibre.com