summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-common/smp.c
AgeCommit message (Collapse)AuthorFilesLines
2015-07-27atomic: Replace atomic_{set,clear}_mask() usagePeter Zijlstra1-1/+1
Replace the deprecated atomic_{set,clear}_mask() usage with the now ubiquous atomic_{or,andnot}() functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-03-11blackfin: Use common outgoing-CPU-notification codePaul E. McKenney1-4/+2
This commit removes the open-coded CPU-offline notification with new common code. This change avoids calling scheduler code using RCU from an offline CPU that RCU is ignoring. This commit is compatible with the existing code in not checking for timeout during a prior offline for a given CPU. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Steven Miao <realmz6@gmail.com> Cc: <adi-buildroot-devel@lists.sourceforge.net>
2014-08-26blackfin: Replace __get_cpu_var usesChristoph Lameter1-1/+1
__get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) CC: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-01-2906/18] smp, blackfin: kill SMP single function call interruptJiang Liu1-5/+1
Commit 9a46ad6d6df3b54 "smp: make smp_call_function_many() use logic similar to smp_call_function_single()" has unified the way to handle single and multiple cross-CPU function calls. Now only one interrupt is needed for architecture specific code to support generic SMP function call interfaces, so kill the redundant single function call interrupt. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shaohua Li <shli@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jiri Kosina <trivial@kernel.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: uclinux-dist-devel@blackfin.uclinux.org Signed-off-by: Jiang Liu <liuj97@gmail.com>
2013-11-15smp: bf561: and smb_wmb()/smp_rmb() at ipi send/receiveSteven Miao1-4/+8
add smb_wmb()/smp_rmb() to keep cache coherent Signed-off-by: Steven Miao <realmz6@gmail.com>
2013-07-18Merge branch 'cpuinit_phase2' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull phase two of __cpuinit removal from Paul Gortmaker: "With the __cpuinit infrastructure removed earlier, this group of commits only removes the function/data tagging that was done with the various (now no-op) __cpuinit related prefixes. Now that the dust has settled with yesterday's v3.11-rc1, there hopefully shouldn't be any new users leaking back in tree, but I think we can leave the harmless no-op stubs there for a release as a courtesy to those who still have out of tree stuff and weren't paying attention. Although the commits are against the recent tag to allow for minor context refreshes for things like yesterday's v3.11-rc1~ slab content, the patches have been largely unchanged for weeks, aside from such trivial updates. For detail junkies, the largely boring and mostly irrelevant history of the patches can be viewed at: http://git.kernel.org/cgit/linux/kernel/git/paulg/cpuinit-delete.git If nothing else, I guess it does at least demonstrate the level of involvement required to shepherd such a treewide change to completion. This is the same repository of patches that has been applied to the end of the daily linux-next branches for the past several weeks" * 'cpuinit_phase2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (28 commits) block: delete __cpuinit usage from all block files drivers: delete __cpuinit usage from all remaining drivers files kernel: delete __cpuinit usage from all core kernel files rcu: delete __cpuinit usage from all rcu files net: delete __cpuinit usage from all net files acpi: delete __cpuinit usage from all acpi files hwmon: delete __cpuinit usage from all hwmon files cpufreq: delete __cpuinit usage from all cpufreq files clocksource+irqchip: delete __cpuinit usage from all related files x86: delete __cpuinit usage from all x86 files score: delete __cpuinit usage from all score files xtensa: delete __cpuinit usage from all xtensa files openrisc: delete __cpuinit usage from all openrisc files m32r: delete __cpuinit usage from all m32r files hexagon: delete __cpuinit usage from all hexagon files frv: delete __cpuinit usage from all frv files cris: delete __cpuinit usage from all cris files metag: delete __cpuinit usage from all metag files tile: delete __cpuinit usage from all tile files sh: delete __cpuinit usage from all sh files ...
2013-07-16smp: blackfin: fix check error, using atomic_ops to handle atomic_t typeSteven Miao1-3/+3
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-15blackfin: delete __cpuinit usage from all blackfin filesPaul Gortmaker1-6/+6
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/blackfin uses of the __cpuinit macros from all C files. Currently blackfin does not have any __CPUINIT used in assembly files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Mike Frysinger <vapier@gentoo.org> Cc: Bob Liu <lliubbo@gmail.com> Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: uclinux-dist-devel@blackfin.uclinux.org Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-09smp: refine bf561 smpboot codeSteven Miao1-10/+8
release boot lock earlier to let coreb do setup and calibrate set coreb online later after initialization ready add BFIN_IPI_NONE IPI type drop unnecesarry smp_mb() and using atomic type Signed-off-by: Steven Miao <realmz6@gmail.com>
2013-04-08bfin: Use generic idle loopThomas Gleixner1-1/+1
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Link: http://lkml.kernel.org/r/20130321215234.014923303@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-10-08Blackfin: smp: add smp_mb() to keep coherencySteven Miao1-2/+2
After use generic smp helpers, smp_mb() should be added to keep coherency. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-09-07blackfin: smp: adapt to generic smp helpersSteven Miao1-157/+66
Replace blackfin ipi message queue with generic smp helper function. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-04-26blackfin: Use generic idle thread allocationThomas Gleixner1-18/+1
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Link: http://lkml.kernel.org/r/20120420124557.717064871@linutronix.de
2012-04-26smp: Add task_struct argument to __cpu_up()Thomas Gleixner1-1/+1
Preparatory patch to make the idle thread allocation for secondary cpus generic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Richard Weinberger <richard@nod.at> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20120420124556.964170564@linutronix.de
2012-01-09blackfin: smp: fix msg queue overflow issueSteven Miao1-5/+3
disable preemption when icache flush and use wait mode cross call, hold the msg queue lock while handle cross function call to avoid overflow Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-01-09blackfin: smp: cleanup smp codeBob Liu1-12/+41
move idle task point to percpu blackfin_cpudata and add smp_timer_broadcast interface. enable SUPPLE_1_WAKEUP and add BFIN_IPI_TIMER ipi support. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-10-26Blackfin: SMP: fix scheduling deadlockSteven Miao1-1/+6
Make sure our smp_send_reschedule() implementation matches the scheduler_ipi() callback so that it can kick the idle cpu. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-27atomic: use <linux/atomic.h>Arun Sharma1-1/+1
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-23Blackfin: optimize double fault boot checkingMike Frysinger1-8/+9
This moves the double fault data used at boot time into a single struct which can then easily be addressed with indexed loads rather than having to explicitly load multiple addresses. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: convert old cpumask API to new oneKOSAKI Motohiro1-13/+14
old cpu_xxx() APIs is planned to removed later. then, converted. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: move internal irq prototypes out of global namespaceMike Frysinger1-0/+1
These are only used in a few internal Blackfin places, so move the irq prototypes out of the global header and into the internal irq one. No functional changes other than shuffling locales. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-21Merge commit 'v2.6.39-rc4' into sched/coreIngo Molnar1-3/+16
Merge reason: Pick up upstream fixes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Provide scheduler_ipi() callback in response to smp_send_reschedule()Peter Zijlstra1-0/+3
For future rework of try_to_wake_up() we'd like to push part of that function onto the CPU the task is actually going to run on. In order to do so we need a generic callback from the existing scheduler IPI. This patch introduces such a generic callback: scheduler_ipi() and implements it as a NOP. BenH notes: PowerPC might use this IPI on offline CPUs under rare conditions! Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152728.744338123@chello.nl
2011-04-14Blackfin: SMP: fix cache flush loopSonic Zhang1-3/+16
The recent commit (10774912647781) wasn't entirely correct. While it fixed some issues, it introduced others. So pull in the fixes from the public cache flush functions, and document why we need to call things directly ourselves. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18Blackfin: SMP: work around anomaly 05000491Sonic Zhang1-0/+4
In order to safely work around anomaly 05000491, we have to execute IFLUSH from L1 instruction sram. The trouble with multi-core systems is that all L1 sram is visible only to the active core. So we can't just place the functions into L1 and call it directly. We need to setup a jump table and place the entry point in external memory. This will call the right func based on the active core. In the process, convert from the manual relocation of a small bit of code into Core B's L1 to the more general framework we already have in place for loading arbitrary pieces of code into L1. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18Blackfin: SMP: disable preempt with smp_processor_id to send messagesSonic Zhang1-6/+8
The smp_processor_id() API requires that preempt be disabled when calling it, so make sure it is when we go to send messages to other processors. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18Blackfin: SMP: delay enabling caches until CPU is initializedsteven miao1-2/+2
Defer bfin_setup_caches(cpu) to avoid unexpected faults due to the cpu state not yet being fully initialized. Signed-off-by: steven miao <realmz6@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18Blackfin: SMP: use standard cache functionsMike Frysinger1-3/+3
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: SMP: rewrite IPI handling to avoid memory allocationYi Li1-119/+78
Currently, sending an interprocessor interrupt (IPI) requires building up a message dynamically which means memory allocation. But often times, we will want to send an IPI in low level contexts where allocation is not possible which may lead to a panic(). So create a per-cpu static array for the message queue and use that instead. Further, while we have two supplemental interrupts, we are currently only using one of them. So use the second one for the most common IPI message of all -- smp_send_reschedule(). This avoids ugly contention for locks which in turn would require an IPI message ... In general, this improves SMP performance, and in some cases allows the SMP port to work in places it wouldn't before. Such as the PREEMPT_RT state where the slab is protected by a per-cpu spin lock. If the slab kmalloc/kfree were to put the task to sleep, and that task was actually the IPI handler, then the system falls down yet again. After running some various stress tests on the system, the static limit of 5 messages seems to work. On the off chance even this overflows, we simply panic(), and we can review that scenario to see if the limit needs to be increased a bit more. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: SMP: tweak platform_request_ipi() usageGraf Yang1-1/+1
This function takes an irq_handler_t function, but the prototype in the header doesn't match the function definition. This is due to the smp headers needing to avoid circular dependencies. So change the function to take a simple pointer. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: SMP: fix cpumask misbehaviorGraf Yang1-6/+1
The cpu maps are defines provided by common linux/cpumask.h, not local variables. So stop exporting them locally and include the right header for their definition. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: SMP: fix continuation linesJoe Perches1-2/+2
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-09Blackfin: rewrite resync_core_{i,d}cache() SMP logic to avoid per_cpu dataGraf Yang1-2/+4
This functions are implicitly called by core functions like cpu_relax(), and since those functions may be called early on before common code has initialized the per-cpu data area, we need to tweak the stats gathering. Now the statistics are maintained in common bss which makes these funcs safe to use as soon as the C runtime env is setup. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: SMP: add PM/CPU hotplug supportGraf Yang1-3/+35
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: SMP: make core timers per-cpu clock events for HRTYi Li1-14/+3
SMP systems require per-cpu local clock event devices in order to enable HRT support. One a BF561, we can use local core timer for this purpose. Originally, there was one global core-timer clock event device set up for core A. To accomplish this feat, we need to split the gptimer0/core timer logic so that each is a standalone clock event. There is no requirement that we only have one clock event source anyways. Once we have this, we just define per-cpu clock event devices for each local core timer. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: flush caches on SMP when one core calls another via IPIYi Li1-2/+24
Sometimes a SMP system will randomly panic at boot. This is due to caches being out of sync when one core tries to signal the other. So when one core calls another via IPI, flush the data caches. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: SMP: don't start up core b until its state has been completely onlinedYi Li1-8/+8
When testing PREEMPT_RT kernel on BF561-EZKit, the kernel blocks while booting. When the kernel initializes the ethernet driver, it sleeps and never wakes up. The issue happens when the kernel waits for a timer for Core B to timeout (the timers are per-cpu based: static DEFINE_PER_CPU(struct tvec_base *, tvec_bases) = &boot_tvec_bases). However, the ksoftirqd thread for Core B (note, the ksoftirqd thread is also per-cpu based) cannot work properly, and the timers for Core B never times out. When ksoftirqd() for the first time runs on core B, it is possible core A is still initializing core B (see smp_init() -> cpu_up() -> __cpu_up()). So the "cpu_is_offline()" check may return true and ksoftirqd moves to "wait_to_die". So delay the core b start up until the per-cpu timers have been set up fully. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25Blackfin: fix memset in smp_send_reschedule() and -stop()Roel Kluin1-4/+2
To set zeroes the sizeof the struct should be used rather than sizeof the pointer, kzalloc does that. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07Blackfin: mass clean up of copyright/licensing infoRobin Getz1-18/+4
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16arch/blackfin: Add kmalloc NULL testsJulia Lawall1-0/+8
Check that the result of kmalloc is not NULL before passing it to other functions. In the first two cases, the new code returns -ENOMEM, which seems compatible with what is done for similar functions for other architectures. In the last two cases, the new code fails silently, ie just returns, because the function has void return type. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) | f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16Blackfin: drop per-cpu loops_per_jiffy trackingMichael Hennerich1-1/+1
On Blackfin SMP, a per-cpu loops_per_jiffy is pointless since both cores always run at the same CCLK. In addition, the current implementation has flaws since the main consumer for loops_per_jiffy (asm/delay.h) uses the global kernel loops_per_jiffy and not the per_cpu one. So punt all of the per-cpu handling and go back to the global shared one. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: fix deadlock in SMP IPI handlerSonic Zhang1-6/+7
When a low priority interrupt (like ethernet) is triggered between 2 high priority IPI messages, a deadlock in disable_irq() is hit by the second IPI handler. This is because the second IPI message is queued within the first IPI handler, but the handler doesn't process all messages, and new ones are inserted rather than appended. So now we process all the pending messages, and append new ones to the pending list. URL: http://blackfin.uclinux.org/gf/tracker/5226 Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: add blackfin_invalidate_entire_icache for SMP systemsSonic Zhang1-0/+11
The KGDB code uses this when switching processors to make sure the icache is in a valid state. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: drop unused reserve_pda() functionGraf Yang1-3/+0
The Per-processor Data Area isn't actually reserved by this function, and all it ended up doing was issuing a printk(), so punt it. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: add support for gptimer0 as a tick sourceGraf Yang1-2/+3
For systems where the core cycles are not a usable tick source (like SMP or cycles gets updated), enable gptimer0 as an alternative. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: annotate anomaly 05000120Graf Yang1-0/+4
Add some notes for anomaly 05000120 to make sure we work around it. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-03-05Blackfin arch: fix bug - kgdb fails to continue after setting breakpoint on ↵Sonic Zhang1-1/+5
bf561-ezkit kernel with smp patch Free spinlock before call IPI handlers. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Header from folded patch 'blackfin_arch__fix_bug_-_kgdb_fails_to_continue_after_setting_breakpoint_on_bf561-ezkit_kernel_with_smp_patch-1': Blackfin arch: fix bug - kgdb fails to continue after setting breakpoint on bf561-ezkit kernel with smp patch Don't test l1 code in SMP kernel. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: merge adeos blackfin part to arch/blackfin/Yi Li1-2/+2
[Mike Frysinger <vapier.adi@gmail.com>: - handle bf531/bf532/bf534/bf536 variants in ipipe.h - cleanup IPIPE logic for bfin_set_irq_handler() - cleanup ipipe asm code a bit and add missing ENDPROC() - simplify IPIPE code in trap_c - unify some of the IPIPE code and fix style - simplify DO_IRQ_L1 handling with ipipe code - revert IRQ_SW_INT# addition from ipipe merge - remove duplicate get_{c,s}clk() prototypes ] Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: rename irq_flags to bfin_irq_flagsMike Frysinger1-1/+1
rename irq_flags to bfin_irq_flags to avoid namespace collision with common code Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-03 03:39:17 +0300