summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf527/include
AgeCommit message (Collapse)AuthorFilesLines
2011-01-10Blackfin: unify pll.h headersMike Frysinger1-63/+1
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: drop asm/irq.h include from mach headersMike Frysinger1-3/+0
These were only included because of the irq handling of the PLL funcs, and those PLL funcs have been moved out into their own header now. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: bf51x/bf52x: drop redundant "base" def/cdef headerMike Frysinger4-2504/+2475
The defBF512.h header exists only to include defBF51x_base.h, and it is the only place where defBF51x_base.h is included. So move the contents of the defBF51x_base.h header into the defBF512.h header. Same situation for the other def/cdef pairs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: clean up mach header includesMike Frysinger9-53/+30
The main asm/blackfin.h header will pull in mach/blackfin.h to get all the fun Blackfin defines. So having any of the sub-mach headers trying to include asm/blackfin.h makes no sense -- punt it. The mach/blackfin.h header takes care of including the part-specific def headers which in turn will include any other needed def file. Similarly, it takes care of pulling in the part-specific cdef header. So move this logic out of the blackfin.h when necessary. Further, make sure the cdef headers do not waste time including the def headers again. Since all parts need the common def/cdef headers, move this logic out of the part-specific headers and into the mach/blackfin.h file. Finally, we need to split the BF539 def header since the BF538 does not have MXVR and we don't want to expose those MMRs. So now all parts should have the same behavior: mach/blackfin.h asm/def_LPBlackfin.h part-specific def.h if ! asm asm/cdef_LPBlackfin.h part-specific cdef.h And the sub def/cdef headers only tail into what they need. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: push gpio (port) defines into common headersMike Frysinger2-57/+4
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: standardize DMAC traffic control MMRs & MDMA MMRsMike Frysinger2-16/+6
Use the same naming convention for DMA traffic MMRs (most were legacy anyways) so we can avoid useless ifdef trees. Same goes for MDMA names -- this actually allows us to undo a bunch of ifdef redirects that existed for this purpose alone. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: bfin_serial.h: unify heavily duplicated serial codeMike Frysinger4-131/+16
Each Blackfin port has been duplicating UART structures and defines when there really is no need for it. So start a new bfin_serial.h header to unify all these pieces and give ourselves a fresh start. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-23Blackfin: bf51x/bf52x: fix 16/32bit SPORT MMR helpersBob Liu1-16/+16
The RX/TX address is always the same regardless of the size of the access. That means there is no dedicated "16bit" or "32bit" MMR. Trying to use these currently leads to compile errors. So change everything to use the right MMR define. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: punt short SPI MMR bit namesMike Frysinger1-45/+0
Now that the common header defines everything and the SPI drivers are using it, we can drop these duplicated global namespace polluters. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-07Blackfin: Rename IRQ flags handling functionsDavid Howells1-4/+4
Rename h/w IRQ flags handling functions to be in line with what is expected for the irq renaming patch. This renames local_*_hw() to hard_local_*() using the following perl command: perl -pi -e 's/local_irq_(restore|enable|disable)_hw/hard_local_irq_\1/ or s/local_irq_save_hw([_a-z]*)[(]flags[)]/flags = hard_local_irq_save\1()/' `find arch/blackfin/ -name "*.[ch]"` and then fixing up asm/irqflags.h manually. Additionally, arch/hard_local_save_flags() and arch/hard_local_irq_save() both return the flags rather than passing it through the argument list. Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-07Blackfin: Split PLL code from mach-specific cdef headersDavid Howells2-50/+63
Split the PLL control code from the Blackfin machine-specific cdef headers so that the irqflags functions can be renamed without incurring a header loop. Signed-off-by: David Howells <dhowells@redhat.com>
2010-08-27Blackfin: punt duplicate SPORT MMR definesMike Frysinger1-82/+0
The common bfin_sport.h header now has unified definitions of these, so stop polluting the global namespace. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: unify rotary encoder bitmasksMike Frysinger1-108/+0
Avoid duplication and ugly global namespace pollution. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: TWI: clean up the MMR namesMike Frysinger1-18/+18
The standard short name for control is CTL and not CTRL. Use TWI0_xxx even on parts that only have one TWI bus to keep things simple. Drop all the cdef helpers since the bus driver takes care of everything. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: BF51x/BF52x: support GPIO Hysteresis/Schmitt Trigger optionsMichael Hennerich1-0/+120
Newer parts have optional Hysteresis/Schmitt Trigger options to help with dirty signals. So add some kconfig options for tuning this and enable it by default for people. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: gpio/portmux: clean up whitespace corruptionMike Frysinger2-49/+49
Random tabs instead of spaces, mixes of the two, and unicode spaces instead of ascii spaces. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: add a GPIO_DEFAULT_BOOT_SPI_CSMike Frysinger1-0/+1
This is parallel to the existing P_DEFAULT_BOOT_SPI_CS, but in terms of the GPIO value so it can be used with the normal gpio API. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: update anomaly lists to latest public infoMike Frysinger1-4/+18
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: punt NFC MMR bitsMike Frysinger1-81/+0
Now that the NFC driver has its own defines, scrub the ones from the global namespace to avoid ugly collisions with common code. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: add support for the on-chip MAC status interruptsMichael Hennerich1-1/+10
This patch provides infrastructure for MAC Wake-On-Lan and PHYINT use in phylib. New Interrupts added: IRQ_MAC_PHYINT /* PHY_INT Interrupt */ IRQ_MAC_MMCINT /* MMC Counter Interrupt */ IRQ_MAC_RXFSINT /* RX Frame-Status Interrupt */ IRQ_MAC_TXFSINT /* TX Frame-Status Interrupt */ IRQ_MAC_WAKEDET /* Wake-Up Interrupt */ IRQ_MAC_RXDMAERR /* RX DMA Direction Error Interrupt */ IRQ_MAC_TXDMAERR /* TX DMA Direction Error Interrupt */ IRQ_MAC_STMDONE /* Station Mgt. Transfer Done Interrupt */ On BF537/6 the implementation is not straight forward since there are now two chained chained_handlers. A cleaner approach would have been to add latter IRQs to the demux of IRQ_GENERIC_ERROR. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: increase NR_IRQS beyond NR on-chip IRQsMichael Hennerich1-1/+2
This makes room for off-chip IRQ controllers. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: BF52x: unify def/cdef headersMike Frysinger4-1117/+8
Whole lot of duplicated code here just went bye bye. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: unify DMA masksMike Frysinger1-34/+0
Every Blackfin variant has the same DMA bit masks, so avoid duplicating them over and over in each mach header. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: unify duplicated power masksMike Frysinger2-58/+0
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: punt OTP MMRsMike Frysinger2-62/+0
People should not be accessing OTP MMRs directly. They should instead go through the Blackfin ROM helper functions. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: scrub unused watchdog mmr masksMike Frysinger1-34/+0
The watchdog code doesn't need these, and the other parts had these punted, so keep the global namespace clean. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: scrub unused RTC masksMike Frysinger1-26/+0
The RTC driver code doesn't need these, and the other parts had these punted, so keep the global namespace clean. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: BF51x/BF52x: fill out bfin_clear_PPI_STATUS()Mike Frysinger1-0/+1
All the arches define a helper macro to make things easy for driver code. Reported-by: Frank Van Hooft <frank@frankvh.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-07Merge branch 'for-next' into for-linusJiri Kosina1-2/+2
Conflicts: kernel/irq/chip.c
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa1-2/+2
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-25Blackfin: update anomaly listsMike Frysinger1-5/+15
Add some recently documented anomalies (473, 474, 475, 477). Also stick a "do not edit" notice in here so people know these are copies of some master version. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07Blackfin: mass clean up of copyright/licensing infoRobin Getz14-320/+30
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-17Blackfin: update anomaly listsYi Li1-2/+11
Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-17Blackfin: drop unused MMR defines that only cause bad code to be writtenMike Frysinger1-10/+0
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16Blackfin: fix wrong CTS inversionSonic Zhang1-1/+1
The Blackfin serial headers were inverting the CTS value leading to wrong handling of the CTS line which broke CTS/RTS handling completely. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16Blackfin: update anomaly lists to match latest sheets/usageGraf Yang1-1/+3
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-23Blackfin: unify memory map headersMike Frysinger2-48/+9
Many aspects of the Blackfin memory map is exactly the same across all variants. Rather than copy and paste all of these duplicated values in each header, unify all of these into the common Blackfin memory map header file. In the process, push down BF561 SMP specific stuff to the BF561 specific header to keep the noise down. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-23Blackfin: update anomaly listsMike Frysinger1-2/+13
Update anomaly headers to match latest released anomaly sheets. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: pull updated anomaly lists from toolchainMike Frysinger1-59/+109
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-04-07tty: Blackin CTS/RTSSonic Zhang1-3/+7
Both software emulated and hardware based CTS and RTS are enabled in serial driver. The CTS RTS PIN connection on BF548 UART port is defined as a modem device not as a host device. In order to test it under Linux, please nake a cross UART cable to exchange CTS and RTS signal. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07Change hardware flow control from poll to interrupt drivenSonic Zhang1-26/+0
Only the CTS bit is affected. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-28Blackfin arch: convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}xMike Frysinger1-2/+0
convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}x as the defines are redundant in these cases Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05Blackfin arch: add stubs for anomalies 447 and 448Mike Frysinger1-0/+2
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-04Blackfin arch: update anomaly sheets to match latest public infoMike Frysinger1-1/+2
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-03Blackfin arch: fix bug - Error if one serial has hardware flow control and ↵Tom Parker1-2/+2
the other doesn't I have a system where UART0 is configured with hardware flow control, but UART1 doesn't have it enabled. Attempting to access UART1 in this configuration results in the following error in dmesg: <3>bfin-gpio: GPIO 0 is already reserved as Peripheral by bfin-uart ! <5>Stack from 0082bc7c: <5> 0082bc88 00404dd6 00000003 00000000 0054051e 004079da 0082bcb4 00000000 <5> 00000003 00000000 0052686c 0113f2a0 005fa3f0 00000032 20515249 00003035 <5> 00427228 00526e50 0113f2e0 005fa3f0 00000032 0113f2e0 0054b748 0000ffff <5> 22222222 22222222 004e1628 00427304 00000000 00000032 00000023 0054b748 <5> 00487a94 0054b7e8 0054b748 0000000b 00487fb8 0054b748 0054b748 00000001 <5> 0000000a 005fa3f0 009d4fe8 0101e3c0 0054b748 005fa3f0 0050b134 0054b748 <5> <5>Call Trace: <4>[<00485c16>] _uart_startup+0x56/0x178 <4>[<004865c8>] _uart_open+0x40/0x3e0 <4>[<0048661c>] _uart_open+0x94/0x3e0 <4>[<0047f1ce>] _init_dev+0x1fa/0x450 <4>[<004e1628>] ___mutex_unlock_slowpath+0x30/0xe8 <4>[<004815da>] _tty_open+0xf6/0x21c <4>[<0043dab0>] ___path_lookup_intent_open+0x34/0x7c <4>[<004375e4>] _chrdev_open+0x7c/0x134 <4>[<0043dc2c>] _open_namei+0x60/0x568 <4>[<00433fa2>] ___dentry_open+0x9e/0x188 <4>[<00437568>] _chrdev_open+0x0/0x134 <4>[<0043410c>] _nameidata_to_filp+0x30/0x3c <4>[<00434152>] _do_filp_open+0x3a/0x44 <4>[<00408826>] _task_running_tick+0x102/0x278 <4>[<0043418e>] _do_sys_open+0x32/0xac <4>[<0043ede4>] _sys_ioctl+0x28/0x50 <4>[<0043edbc>] _sys_ioctl+0x0/0x50 <4>[<00434224>] _sys_open+0x18/0x20 <4>[<0043420c>] _sys_open+0x0/0x20 <4>[<00418174>] _sys_setuid+0x0/0xc8 This is because the #ifdef's in bfin_serial_5xx.h are messed up. More specifically, they add/remove the uart_{rts,cts}_pin fields in bfin_serial_resources based on whether the particular port has rts/cts enabled, as opposed to when either port has it enabled. This patch fixed this. Signed-off-by: Tom Parker <blackfin@tevp.net> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-03Blackfin arch: fix compile failure when missing the anomaly definitionMike Frysinger1-0/+1
make sure ANOMALY_05000278/ANOMALY_05000380 is defined for all parts Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrdSonic Zhang1-0/+2
[Mike Frysinger <vapier.adi@gmail.com>: - setup P_DEFAULT_BOOT_SPI_CS for every arch based on the default bootrom behavior and convert all our boards to it - revert previous anomaly change ... bf51x is not affected by anomaly 05000353] Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: fix bug - BF527 0.2 silicon has different CPUID (DSPID) valueRobin Getz1-3/+3
BF523/5/7 == 27e0 (all revs) BF522/4/6 == 27e4 (all revs) Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add () to avoid warnings from gccMike Frysinger1-1/+1
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: merge adeos blackfin part to arch/blackfin/Yi Li2-20/+20
[Mike Frysinger <vapier.adi@gmail.com>: - handle bf531/bf532/bf534/bf536 variants in ipipe.h - cleanup IPIPE logic for bfin_set_irq_handler() - cleanup ipipe asm code a bit and add missing ENDPROC() - simplify IPIPE code in trap_c - unify some of the IPIPE code and fix style - simplify DO_IRQ_L1 handling with ipipe code - revert IRQ_SW_INT# addition from ipipe merge - remove duplicate get_{c,s}clk() prototypes ] Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-26 01:14:58 +0300