summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2024-10-25ARM: dts: cubieboard4: Fix DCDC5 regulator constraintsAndre Przywara1-2/+2
The DCDC5 voltage rail in the X-Powers AXP809 PMIC has a resolution of 50mV, so the currently enforced limits of 1.475 and 1.525 volts cannot be set, when the existing regulator value is beyond this range. This will lead to the whole regulator driver to give up and fail probing, which in turn will hang the system, as essential devices depend on the PMIC. In this case a bug in U-Boot set the voltage to 1.75V (meant for DCDC4), and the AXP driver's attempt to correct this lead to this error: ================== [ 4.447653] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded [ 4.450066] vcc-dram: Bringing 1750000uV into 1575000-1575000uV [ 4.460272] vcc-dram: failed to apply 1575000-1575000uV constraint: -EINVAL [ 4.474788] axp20x-regulator axp20x-regulator.0: Failed to register dcdc5 [ 4.482276] axp20x-regulator axp20x-regulator.0: probe with driver axp20x-regulator failed with error -22 ================== Set the limits to values that can be programmed, so any correction will be successful. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Fixes: 1e1dea72651b ("ARM: dts: sun9i: cubieboard4: Add AXP809 PMIC device node and regulators") Link: https://patch.msgid.link/20241007222916.19013-1-andre.przywara@arm.com Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-10-25ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylinHeiko Stuebner1-2/+2
Both the node name as well as the compatible were not named according to the binding expectations, fix that. Fixes: 47bf3a5c9e2a ("ARM: dts: rockchip: add the sound setup for rk3036-kylin board") Cc: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20241008203940.2573684-15-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-10-25ARM: dts: rockchip: Fix the spi controller on rk3036Heiko Stuebner1-3/+3
Compatible and clock names did not match the existing binding. So set the correct values and re-order+rename the clocks. It looks like no rk3036 board did use the spi controller so far, so this was never detected on a running device yet. Fixes: f629fcfab2cd ("ARM: dts: rockchip: support the spi for rk3036") Cc: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20241008203940.2573684-14-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-10-25ARM: dts: rockchip: drop grf reference from rk3036 hdmiHeiko Stuebner1-1/+0
Neither the binding nor the driver implementation specify/use the grf reference provided in the rk3036. And neither does the newer rk3128 user of the hdmi controller. So drop the rockchip,grf property. Fixes: b7217cf19c63 ("ARM: dts: rockchip: add hdmi device node for rk3036") Cc: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20241008203940.2573684-13-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-10-25ARM: dts: rockchip: fix rk3036 acodec nodeHeiko Stuebner1-3/+4
The acodec node is not conformant to the binding. Set the correct nodename, use the correct compatible, add the needed #sound-dai-cells and sort the rockchip,grf below clocks properties as expected. Fixes: faea098e1808 ("ARM: dts: rockchip: add core rk3036 dtsi") Reviewed-by: Dragan Simic <dsimic@manjaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20241008203940.2573684-12-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-10-24ARM: dts: qcom: ipq4019: use nvmem-layoutRosen Penev1-8/+11
nvmem-layout is a more flexible replacement for nvmem-cells. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://lore.kernel.org/r/20241022002444.843484-1-rosenp@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-23ARM: dts: qcom: change labels to lower-caseKrzysztof Kozlowski9-79/+79
DTS coding style expects labels to be lowercase. No functional impact. Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-18-0505bc7d2c56@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-23arm64: dts: qcom: msm: change labels to lower-caseKrzysztof Kozlowski1-1/+1
DTS coding style expects labels to be lowercase. No functional impact. Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-2-0505bc7d2c56@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-23ARM: dts: qcom: sdx65: Add 'linux,pci-domain' to PCIe EP controller nodeManivannan Sadhasivam1-0/+1
'linux,pci-domain' property provides the PCI domain number for the PCI endpoint controllers in a SoC. If this property is not present, then an unstable (across boots) unique number will be assigned. Use this property to specify the domain number based on the actual hardware instance of the PCI endpoint controllers in SDX65 SoC. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20240828-pci-qcom-hotplug-v4-8-263a385fbbcb@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-23ARM: dts: qcom: sdx55: Add 'linux,pci-domain' to PCIe EP controller nodeManivannan Sadhasivam1-0/+1
'linux,pci-domain' property provides the PCI domain number for the PCI endpoint controllers in a SoC. If this property is not present, then an unstable (across boots) unique number will be assigned. Use this property to specify the domain number based on the actual hardware instance of the PCI endpoint controllers in SDX55 SoC. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20240828-pci-qcom-hotplug-v4-7-263a385fbbcb@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-22ARM: dts: imx6sll: fix anatop thermal dtbs_check warningsAndreas Kemnade1-1/+2
Fix anatop thermal related dtbs_check warnings about node name and missing thermal-cells property. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6dl: Add support for i.MX6DL DHCOM SoM on PDK2 carrier boardMarek Vasut2-0/+21
Add support for the DH electronics i.MX6DL DHCOM SoM and a PDK2 evaluation board. The evaluation board features three serial ports, USB OTG, USB host with an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, analog audio, PCIe and HDMI video output. All of the aforementioned features except for mSATA are supported, mSATA is not available on i.MX6DL and is only available on DHCOM populated with i.MX6Q SoC which is already supported upstream. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6qdl-dhcom-pdk2: Fill in missing panel power-supplyMarek Vasut1-0/+20
Add missing panel power-supply property to DT to fix the following warning. The power supply on this device is very simple chain of regulators from the main 24V input, describe those. " arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dtb: panel: 'power-supply' is a required property " Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6qdl-dhcom-pdk2: Drop incorrect size-cells in GPIO keysMarek Vasut1-1/+0
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys is not a bus, see dtbs_check warning: " arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-pdk2.dtb: gpio-keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+' " Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6qdl-dhcom-som: Drop bogus regulator-suspend-mem-microvoltMarek Vasut1-2/+0
Drop unused regulator-suspend-mem-microvolt property from PMIC regulator nodes. This property is not used by either U-Boot, Linux, nor is it documented in the DT bindings, remove it. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: imx: Switch to new sys-off handler APIAndrew Davis1-4/+2
Kernel now supports chained power-off handlers. Use register_platform_power_off() that registers a platform level power-off handler. Legacy pm_power_off() will be removed once all drivers and archs are converted to the new sys-off API. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx7-colibri: Update audio card nameHiago De Franco1-1/+1
Update the audio card name for Colibri iMX7 to match its specific SoM name, making it compliant with the other names for Colibri iMX6 and Apalis iMX6. While this is a breaking change for userspace tooling, it seems time to implement it since no ALSA UCM or related configuration files currently exist and we are in the the process of creating them. Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6qdl-colibri: Update audio card nameHiago De Franco1-1/+1
Update the audio card name for Colibri iMX6 to match its specific SoM name, making it less than 15 characters to fix the following warning fsl-asoc-card sound: ASoC: driver name too long 'imx6dl-colibri-sgtl5000' -> 'imx6dl-colibri-' making it compliant with the ALSA configuration specification [1]. While this is a breaking change for userspace tooling, it seems time to implement it since no ALSA UCM or related configuration files currently exist and we are in the the process of creating them. [1] Documentation/sound/alsa-configuration.rst Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6qdl-apalis: Update audio card nameHiago De Franco1-1/+1
Update the audio card name for Apalis iMX6 to match its specific SoM name, making it less than 15 characters to fix the following warning fsl-asoc-card sound: ASoC: driver name too long 'imx6q-apalis-sgtl5000' -> 'imx6q-apalis-sg' making it compliant with the ALSA configuration specification [1]. While this is a breaking change for userspace tooling, it seems time to implement it since no ALSA UCM or related configuration files currently exist and we are in the the process of creating them. [1] Documentation/sound/alsa-configuration.rst Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-21reiserfs: The last commitJan Kara1-4/+0
Deprecation period of reiserfs ends with the end of this year so it is time to remove it from the kernel. Acked-by: Darrick J. Wong <djwong@kernel.org> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz>
2024-10-21ARM: dts: Reconfigure the MC2 eMMC interfaceLinus Walleij2-11/+64
The eMMC interface was configured to configure the FBCLK into the Alt A setting, but this should be in GPIO mode and available for use as a reset line. Move it to the new mc_a_2 setting, and define this config in the generic options. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20241019-ux500-dts-updates-v1-2-a89bfbd0f680@linaro.org
2024-10-21ARM: dts: ux500: Add touchkeys to CodinasLinus Walleij2-0/+2
The Codina Zinitix touchscreens have touchkeys for HOME and BACK, add these now that the driver and bindings support it. Cc: Nikita Travkin <nikita@trvn.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20241019-ux500-dts-updates-v1-1-a89bfbd0f680@linaro.org
2024-10-21ARM: dts: imx6qdl-dhcom: Fix model typo for i.MX6 DHSOMMarek Vasut3-3/+3
Each DHSOM uses three digits in the Cnnn part, drop the trailing zero. This is a change in comment, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-21ARM: dts: imx6qdl-tx6: Fix 'fixed-clock' descriptionFabio Estevam1-2/+1
Per fixed-clock.yaml, it is not correct to pass unit address and reg to represent 'fixed-clock'. Remove it to fix the following dt-schema warning: clock@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Reported-by: Rob Herring <robh@kernel.org> Closes: https://lore.kernel.org/linux-arm-kernel/172808887941.121658.5039774358299826312.robh@kernel.org/ Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-21ARM: dts: imx6qdl-tx6: Remove 'turn-on-delay-ms'Fabio Estevam5-6/+0
The 'turn-on-delay-ms' property is not documented nor used anywhere else. Remove this invalid property to fix the following dt-schema warning: Unevaluated properties are not allowed ('turn-on-delay-ms' was unexpected) Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-17ARM: dts: amlogic: meson8/8b: remove invalid pinctrl regNeil Armstrong2-30/+26
The pinctrl aobus/cbus was originally here to configure the GPIO interrupt, but it was a bad design and was moved to a separate gpio_intc node because the GPIO interrupt is actually separate from the pinctrl/gpio registers. Drop this reg entry, and fix all the register offsets with a proper range property. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # Odroid-C1 Link: https://lore.kernel.org/r/20241015-topic-amlogic-arm32-upstream-bindings-fixes-pinctrl-dtbs-v1-1-c7291f17063e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-10-16ARM: Switch to irq_get_nr_irqs() / irq_set_nr_irqs()Bart Van Assche1-3/+2
Use the irq_get_nr_irqs() and irq_set_nr_irqs() functions instead of the global variable 'nr_irqs'. Prepare for changing 'nr_irqs' from an exported global variable into a variable with file scope. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241015190953.1266194-3-bvanassche@acm.org
2024-10-16ARM: dts: nxp: imx6ull: add dma support for uart8Sean Nyekjaer1-0/+2
Add dma support on uart8. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-16ARM: dts: nxp: imx6ul: add dma support for all uartsSean Nyekjaer1-0/+16
Add dma support on uart1, uart2, uart3, uart4, uart5, uart6 and uart7. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-16ARM: dts: imx6q-lxr: Add board supportFabio Estevam2-0/+88
The Comvetia LXR board is based on a i.MX6Q phyFLEX-i.MX6 Quad SoM from Phytec. Add a devicetree description for this board. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-16vdso: Introduce vdso/page.hVincenzo Frascino1-4/+1
The VDSO implementation includes headers from outside of the vdso/ namespace. Introduce vdso/page.h to make sure that the generic library uses only the allowed namespace. Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Link: https://lore.kernel.org/all/20241014151340.1639555-3-vincenzo.frascino@arm.com
2024-10-15arm: vdso: Remove timekeeper includesThomas Weißschuh2-5/+0
Since the generic VDSO clock mode storage is used, this header file is unused and can be removed. This avoids including a non-VDSO header while building the VDSO, which can lead to compilation errors. Also drop the comment which is out of date and in the wrong place. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241010-vdso-generic-arch_update_vsyscall-v1-2-7fe5a3ea4382@linutronix.de
2024-10-14ARM: dts: rockchip: Add Relfor Saib boardKarthikeyan Krishnasamy2-0/+423
Saib is an consumer electronics board from Relfor labs Features: - Rockchip RV1109 - 1GB DDR4 - 4GB eMMC - Realtek RTL8821CS Wi-Fi/BT - IR transmitter/receiver - RV3028 RTC - Switch - User leds Add support for it. Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com> Link: https://lore.kernel.org/r/20240912142451.2952633-7-karthikeyan@linumiz.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-10-14ARM: dts: rockchip: Add watchdog node for RV1126Karthikeyan Krishnasamy1-0/+8
Add watchdog node for Rockchip RV1126 Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com> Link: https://lore.kernel.org/r/20240912142451.2952633-3-karthikeyan@linumiz.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-10-14ARM: dts: renesas: kzm9g: Use interrupts-extended for sensorsGeert Uytterhoeven1-5/+3
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/e04fff0e6d7d9ffebf5e3d3fe7682f0d411b60d9.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: kzm9g: Use interrupts-extended for I/O expanderGeert Uytterhoeven1-2/+1
Use the more concise interrupts-extended property to fully describe the interrupt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/c77ffcd01d6e9e90cd1e5578c2af98c9ec6030c9.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: r8a7742-iwg21m: Use interrupts-extended for RTCGeert Uytterhoeven1-2/+1
Use the more concise interrupts-extended property to fully describe the interrupt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/f3838c730a8af5a904939929e30a4d892fef8b39.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: iwg22d-sodimm: Use interrupts-extended for port expanderGeert Uytterhoeven1-2/+1
Use the more concise interrupts-extended property to fully describe the interrupt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/835b5e851939f6fa2c9567d6850a7e0c2574c1c7.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for video decodersGeert Uytterhoeven3-6/+3
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/a8610814e31d0562732672f11d2be1404322121a.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for touchpanelsGeert Uytterhoeven4-8/+4
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/d081d986e3a2b695bc27dbe00aa0fb244a22ffdf.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for PMICsGeert Uytterhoeven8-28/+14
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/934b9b9992dacd72dbad0f5433728aac292a3cfc.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for HDMI bridgesGeert Uytterhoeven10-20/+10
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/850317c7818b100f9afe026e80b6d685affe81a0.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for Ethernet PHYsGeert Uytterhoeven10-20/+10
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/623645456e7636f43150a70f8603114b26304818.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for Ethernet MACsGeert Uytterhoeven7-14/+7
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/f51de53cb003f850751e13fdbddea64ad942ee7b.1728045620.git.geert+renesas@glider.be
2024-10-13ARM: dts: microchip: Rename LED sub nodes nameAndrei Simion8-23/+27
dtbs_check warnings: leds: 'd[0-9]', 'ds[0-9]' do not match any of the regexes : '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' leds: 'red', 'green', 'blue' do not match any of regexes : '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Rename the led sub nodes according to devicetree specification and leds-gpio.yaml and for aks-cdu add label property and use the old node name as value to stay stable and avoid breaking the userspace applications that depend on those paths. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Link: https://lore.kernel.org/r/20241002123010.111028-4-andrei.simion@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-10-13ARM: dts: microchip: Rename the pmic nodeAndrei Simion7-7/+7
Rename the pmic node according to the devicetree specification. Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Link: https://lore.kernel.org/r/20241002123010.111028-3-andrei.simion@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-10-13ARM: dts: microchip: Rename the eeprom nodenameAndrei Simion7-7/+7
Align the eeprom nodename according to devicetree specification and at24.yaml Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Link: https://lore.kernel.org/r/20241002123010.111028-2-andrei.simion@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-10-13ARM: configs: at91: enable PAC1934 driver as moduleMihai Sain3-0/+3
Enable PAC1934 driver and build as module. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20240923064932.5797-6-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-10-13ARM: dts: microchip: sama7g5ek: Add power monitor supportMihai Sain1-0/+31
Add PAC1934 support in order to monitor the board power consumption. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20240923064932.5797-5-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-10-13ARM: dts: microchip: sama7g54_curiosity: Add power monitor supportMihai Sain1-0/+31
Add PAC1934 support in order to monitor the board power consumption. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20240923064932.5797-4-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 12:56:01 +0300