summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2018-08-30ARM: s3c24xx: Remove empty gta02_pmu children probeKrzysztof Kozlowski1-42/+0
Since commit 67e67df8da72 ("gta02: Use pcf50633 backlight driver instead of platform backlight driver.") the list of gta02 pmu children is empty therefore looping through it and adding devices is a no-op. This also fixes the GCC v8.1 W=1 warning: arch/arm/mach-s3c24xx/mach-gta02.c: In function 'gta02_pmu_attach_child_devices': arch/arm/mach-s3c24xx/mach-gta02.c:538:16: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++) ^ Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-08-30ARM: exynos: Fix imprecise abort during Exynos5422 suspend to RAMKrzysztof Kozlowski3-6/+25
Suspend to RAM on Odroid XU3/XU4/HC1 family (Exynos5422) causes imprecise abort: PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.003 seconds) done. OOM killer disabled. Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done. wake enabled for irq 139 Disabling non-boot CPUs ... IRQ51 no longer affine to CPU1 IRQ52 no longer affine to CPU2 IRQ53 no longer affine to CPU3 IRQ54 no longer affine to CPU4 IRQ55 no longer affine to CPU5 IRQ56 no longer affine to CPU6 cpu cpu4: Dropping the link to regulator.40 IRQ57 no longer affine to CPU7 Unhandled fault: external abort on non-linefetch (0x1008) at 0xf081a028 Internal error: : 1008 [#1] PREEMPT SMP ARM with last call trace in exynos_suspend_enter(). The abort is caused by writing to register in secure part of sysram. Boards booted under secure firmware (e.g. Hardkernel Odroid boards) should access non-secure sysram. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-08-30ARM: exynos: Store Exynos5420 register state in one variableKrzysztof Kozlowski1-8/+12
Instead of keeping two static variables put them into one struct which later can grow. This will reduce number of file-scope symbols. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-08-30ARM: shmobile: Convert to using %pOFn instead of device_node.nameRob Herring1-1/+1
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-30ARM: shmobile: Remove the ARCH_SHMOBILE Kconfig symbolGeert Uytterhoeven1-4/+0
All drivers for Renesas ARM SoCs have gained proper ARCH_RENESAS platform dependencies. Hence finish the conversion from ARCH_SHMOBILE to ARCH_RENESAS for Renesas 32-bit ARM SoCs, as started by commit 9b5ba0df4ea4f940 ("ARM: shmobile: Introduce ARCH_RENESAS"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-30ARM: shmobile: defconfig: Refresh shmobile_defconfig for v4.19-rc1Geert Uytterhoeven1-3/+1
Refresh the defconfig for Renesas ARM boards: - Move options that have moved, - Remove CONFIG_HAVE_ARM_ARCH_TIMER (auto-enabled), - Remove ENABLE_WARN_DEPRECATED (removed). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-30ARM: dts: socfpga: Rename socfpga_cyclone5_de0_{sockit,nano_soc}Marek Vasut2-1/+1
Rename DT source for DE0 Nano SoC . The board name is really DE0-Nano-SoC or Atlas SoC, and it is not to be confused with SoCkit board, which is a different one. Rename the DT source file to match the board name and to avoid this possible mixup with another different board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-08-30ARM: dts: socfpga: update NAND clocking for c5/a5Dinh Nguyen1-2/+10
The NAND IP needs 3 clocks(nand_x_clk, nand_clk, and nand_ecc_clk). The nand_x_clk and nand_ecc_clk are derived from the nand_clk. The nand_x_clk has a fixed divider of 4. Also, update the NAND dts property with the correct clocks property. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> --- v2: add nand_ecc_clk and update commit message
2018-08-30ARM: dts: arria10: update NAND clockingDinh Nguyen1-2/+18
The NAND IP needs 3 clocks(nand_x_clk, nand_clk, and nand_ecc_clk). This patch adds a nand_clk, which is derived from the nand_x_clk, but has a fixed divider of 4, and the nand_ecc_clk, which is derived from the nand_x_clk. Update the NAND node to use the additional clocks. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> --- v2: add nand_ecc_clk and update commit message
2018-08-30ARM: dts: socfpga: set timer interrupt to edge sensitiveSilvan Murer1-1/+1
Change timer interrupt to edge sensitive. Signed-off-by: Silvan Murer <silvan.murer@gmail.com> Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-08-30ARM: dts: socfpga: use stdout-path for chosen nodeSimon Goldschmidt2-2/+4
Use stdout-path dts property for kernel console. There were two socfpga boards left not using stdout-path: socrates and vining. Make sure they match the other boards. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-08-29ARM: dts: exynos: Fix sound in Snow-rev5 ChromebookMarek Szyprowski1-0/+11
This patch adds missing properties to the CODEC and sound nodes, so the audio will work also on Snow rev5 Chromebook. This patch is an extension to the commit e9eefc3f8ce0 ("ARM: dts: exynos: Add missing clock and DAI properties to the max98095 node in Snow Chromebook") and commit 6ab569936d60 ("ARM: dts: exynos: Enable HDMI audio on Snow Chromebook"). It has been reported that such changes work fine on the rev5 board too. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> [krzk: Fixed typo in phandle to &max98090] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-08-29ARM: dts: exynos: Add LDO28 regulator on Exynos5422 Odroid boardsKrzysztof Kozlowski2-0/+13
The LDO28 is used only on Odroid XU3 for Display Port. Define it so DTS will describe entire hardware. Depending on bootloader behavior this might affect the Display Port because none of drivers are enabling it. By default it is off in S2MPS11 PMIC reset values. However it could be enabled by bootloader so in such case kernel will later disable it as unused regulator. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2018-08-29ARM: dts: exynos: Disable unused PMIC regulators on Exynos5422 Odroid boardsKrzysztof Kozlowski2-13/+19
Disable unused PMIC regulators on Exynos5422 Odroid boards to reduce energy used. According to schematics: 1. LDO12, LDO16 and LDO24 are not connected, 2. LDO26 is not used on Odroid HC1. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-08-29ARM: dts: exynos: Add unused PMIC regulators on Exynos5422 Odroid boardsKrzysztof Kozlowski1-0/+105
Define LDO14, LDO20-22, LDO25 and LOD29-38 unused regulators to describe the hardware. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-08-29ARM: dts: exynos: Add missing used PMIC regulators on Exynos5422 Odroid boardsKrzysztof Kozlowski1-0/+21
Define LDO2, LDO23 and LDO27 critical board regulators to describe the hardware. Suggested-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-08-29ARM: dts: exynos: Mark 1 GHz CPU OPP as suspend OPP on Exynos5250Marek Szyprowski1-0/+1
1 GHz CPU OPP is the default boot value for the Exynos5250 SOC, so mark it as suspend OPP. This fixes suspend/resume on Samsung Exynos5250 Snow Chomebook, which was broken since switching to generic cpufreq-dt driver in v4.3. Cc: <stable@vger.kernel.org> # 4.3.x: cd6f55457eb4: ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes Cc: <stable@vger.kernel.org> # 4.3.x: 672f33198bee: arm: dts: exynos: Add missing cooling device properties for CPUs Cc: <stable@vger.kernel.org> # 4.3.x Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-08-29ARM: dts: exynos: Convert exynos5250.dtsi to opp-v2 bindingsMarek Szyprowski1-42/+88
Convert Exynos5250 to OPP-v2 bindings. This is a preparation to add proper support for suspend operation point, which cannot be marked in opp-v1. Cc: <stable@vger.kernel.org> # 4.3.x: cd6f55457eb4: ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes Cc: <stable@vger.kernel.org> # 4.3.x: 672f33198bee: arm: dts: exynos: Add missing cooling device properties for CPUs Cc: <stable@vger.kernel.org> # 4.3.x Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-08-29ARM: dts: s5pv210: Switch to S5Pv210 specific pinctrl wakeup compatibleKrzysztof Kozlowski1-1/+1
The pin controller block of S5Pv210 for handling external wakeup interrupts is different than in newer designs (Exynos). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <snawrocki@kernel.org> Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
2018-08-29ARM: dts: exynos: Fix HDMI-HPD line handling on ArndaleAndrzej Hajda2-1/+8
HDMI-HPD was set active low, moreover by default pincontrol chip sets pull-down on the pin. As a result HDMI driver assumes TV is always connected regardless of actual state. The patch fixes it. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-08-29ARM: dts: exynos: Use i2c-gpio for HDMI-DDC on ArndaleAndrzej Hajda2-8/+26
HDMI-DDC for unknown reasons doesn't work with Exynos I2C controllers. Fortunately i2c-gpio comes to the rescue. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-08-29ARM: dts: exynos: Add DSI and panel nodes on ArndaleAndrzej Hajda1-0/+61
Add to Arndale board: bridge and panel nodes, DSI properties and regulators required by the bridge. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-08-29ARM: dts: exynos: Add DSI node on Exynos5250Andrzej Hajda1-0/+21
Add common part of DSI node for Exynos5250 platforms and a required mipi-phy node. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-08-29ARM: defconfig: Update the ARM Versatile defconfigLinus Walleij1-6/+8
This updates the ARM Versatile defconfig to the latest Kconfig structural changes and adds the DUMB VGA bridge driver so that VGA works out of the box, e.g. with QEMU. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-29y2038: Compile utimes()/futimesat() conditionallyArnd Bergmann1-1/+1
There are four generations of utimes() syscalls: utime(), utimes(), futimesat() and utimensat(), each one being a superset of the previous one. For y2038 support, we have to add another one, which is the same as the existing utimensat() but always passes 64-bit times_t based timespec values. There are currently 10 architectures that only use utimensat(), two that use utimes(), futimesat() and utimensat() but not utime(), and 11 architectures that have all four, and those define __ARCH_WANT_SYS_UTIME in order to get a sys_utime implementation. Since all the new architectures only want utimensat(), moving all the legacy entry points into a common __ARCH_WANT_SYS_UTIME guard simplifies the logic. Only alpha and ia64 grow a tiny bit as they now also get an unused sys_utime(), but it didn't seem worth the extra complexity of adding yet another ifdef for those. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-08-29asm-generic: Remove unneeded __ARCH_WANT_SYS_LLSEEK macroArnd Bergmann1-1/+0
The sys_llseek sytem call is needed on all 32-bit architectures and none of the 64-bit ones, so we can remove the __ARCH_WANT_SYS_LLSEEK guard and simplify the include/asm-generic/unistd.h header further. Since 32-bit tasks can run either natively or in compat mode on 64-bit architectures, we have to check for both !CONFIG_64BIT and CONFIG_COMPAT. There are a few 64-bit architectures that also reference sys_llseek in their 64-bit ABI (e.g. sparc), but I verified that those all select CONFIG_COMPAT, so the #if check is still correct here. It's a bit odd to include it in the syscall table though, as it's the same as sys_lseek() on 64-bit, but with strange calling conventions. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-08-29y2038: Remove newstat family from default syscall setArnd Bergmann1-0/+1
We have four generations of stat() syscalls: - the oldstat syscalls that are only used on the older architectures - the newstat family that is used on all 64-bit architectures but lacked support for large files on 32-bit architectures. - the stat64 family that is used mostly on 32-bit architectures to replace newstat - statx() to replace all of the above, adding 64-bit timestamps among other things. We already compile stat64 only on those architectures that need it, but newstat is always built, including on those that don't reference it. This adds a new __ARCH_WANT_NEW_STAT symbol along the lines of __ARCH_WANT_OLD_STAT and __ARCH_WANT_STAT64 to control compilation of newstat. All architectures that need it use an explict define, the others now get a little bit smaller, and future architecture (including 64-bit targets) won't ever see it. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-08-29ARM/gpio: ep93xx: build standaloneArnd Bergmann1-0/+9
As a preparation for multiplatform support, this ensures that the ep93xx gpio driver can be built without any of the platform specific header files. We pass the IRQ numbers as a resource now, and use the virtual mmio base from the already existing resource, rather than relying on the hardwired virtual address from the header file. Some numbers are now hardcoded that came from macros in the past, but for all I can tell, the driver already relied on the specific values. Cc: arm@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-28ARM: dts: omap4-droid4: Fix emmc errors seen on some devicesTony Lindgren1-1/+1
Otherwise we can get the following errors occasionally on some devices: mmc1: tried to HW reset card, got error -110 mmcblk1: error -110 requesting status mmcblk1: recovery failed! print_req_error: I/O error, dev mmcblk1, sector 14329 ... I have one device that hits this error almost on every boot, and another one that hits it only rarely with the other ones I've used behave without problems. I'm not sure if the issue is related to a particular eMMC card model, but in case it is, both of the machines with issues have: # cat /sys/class/mmc_host/mmc1/mmc1:0001/manfid \ /sys/class/mmc_host/mmc1/mmc1:0001/oemid \ /sys/class/mmc_host/mmc1/mmc1:0001/name 0x000045 0x0100 SEM16G and the working ones have: 0x000011 0x0100 016G92 Note that "ti,non-removable" is different as omap_hsmmc_reg_get() does not call omap_hsmmc_disable_boot_regulators() if no_regulator_off_init is set. And currently we set no_regulator_off_init only for "ti,non-removable" and not for "non-removable". It seems that we should have "non-removable" with some other mmc generic property behave in the same way instead of having to use a non-generic property. But let's fix the issue first. Fixes: 7e2f8c0ae670 ("ARM: dts: Add minimal support for motorola droid 4 xt894") Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-08-28Merge branch 'perm-fix' into omap-for-v4.19/fixes-v2Tony Lindgren578-10806/+19248
2018-08-28ARM: dts: Fix file permission for am335x-osd3358-sm-red.dtsNeeraj Dantu1-0/+0
Fix wrong mode for dts file added by commit bb3e3fbbac86 ("ARM: dts: Add DT support for Octavo Systems OSD3358-SM-RED based on TI AM335x"). Signed-off-by: Neeraj Dantu <neeraj.dantu@octavosystems.com> CC: Robert Nelson <robertcnelson@gmail.com> CC: Jason Kridner <jkridner@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-08-28ARM: dts: uniphier: add SPI node for UniPhier 32bit SoCsKunihiko Hayashi5-0/+77
Add nodes of SPI controller for LD4, Pro4, sLD8, Pro5 and PXs2. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-28ARM: dts: uniphier: add SPI pin-mux nodeKunihiko Hayashi1-0/+20
This commit adds pin-mux nodes for SPI controller. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-28ARM: uniphier: dts: add more clocks to Denali NAND controller nodeMasahiro Yamada5-5/+10
Catch up with the new binding of the Denali IP where three clocks, "nand", "nand_x", "ecc" are required. For UniPhier SoCs, the "nand_x" and "ecc" are tied up because they are both 200MHz. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-28ARM: dts: at91: nattis: describe the lvds panelPeter Rosin1-1/+21
Make the DT usable with the panel-lvds driver. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-28ARM: dts: at91: nattis: move pinctrls for the lvds chip to the lvds nodePeter Rosin1-6/+6
The atmel hlcdc controller has nothing to do with these pins, so move them to where they belong. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-28ARM: dts: at91: nattis: state the actual lvds-encoder chipPeter Rosin1-1/+1
Just to be explicit. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-28ARM: dts: at91: nattis: make the SD-card slot workPeter Rosin1-0/+1
The cd-gpios signal is assumed active-low by the driver, and the cd-inverted property is needed if it is, in fact, active-high. Fix this oversight. Fixes: 0e4323899973 ("ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-28ARM: dts: at91: nattis: set the PRLUD and HIPOW signals lowPeter Rosin1-2/+4
AT91_PINCTRL_OUTPUT_VAL(0) without AT91_PINCTRL_OUTPUT is a no-op, so make sure the pins really output a zero. Fixes: 0e4323899973 ("ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-27ARM: dts: add Raspberry Pi Compute Module 3 and IO boardStefan Wahren3-0/+140
The Raspberry Pi Compute Module 3 (CM3) and the Raspberry Pi Compute Module 3 Lite (CM3L) are SoMs which contains a BCM2837 processor, 1 GB RAM and a GPIO expander. The CM3 has a 4 GB eMMC, but on the CM3L the eMMC is unpopulated and it's up to the user to connect their own SD/MMC device. The dtsi file is designed to work for both modules. There is also a matching carrier board which is called Compute Module IO Board V3. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
2018-08-27ARM: dts: at91/trivial: remove old NAND bindings leftover in sama5d2Nicolas Ferre1-38/+0
As the new bindings are already in place in sama5d2.dtsi and that it's used in the only Mainline board for this product (at91-sama5d2_ptc_ek.dts), we can safely remove the old bindings. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-27ARM: dts: at91/trivial: Fix USART1 definition for at91sam9g45Jay Foster1-1/+1
Fix a typo. No functional change made by this patch. Signed-off-by: Jay Foster <jayfoster@ieee.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-27ARM: at91: pm: remove pm_bu initialization in at91_pm_backup_init()Claudiu Beznea1-3/+0
There is no need to initialize pm_bu since it is used only if backup mode is selected. In case backup mode initialization fails (which means pm_bu is invalid) the ULP0 mode will be selected. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-27ARM: dts: at91: sama5d2 Xplained: add pin muxing for I2SCyrille Pitchen1-0/+30
This patch sets the pin muxing for the I2S controllers Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> [codrin.ciubotariu@microchip.com: added pin muxing for the second controller] Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-27ARM: dts: at91: sama5d2: add nodes for I2S controllersCyrille Pitchen1-0/+38
This patch adds DT nodes for I2S0 and I2S1. It also adds an alias for each I2S node. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> [codrin.ciubotariu@microchip.com: removed unnecessary clock phandles] Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-27ARM: dts: at91: sama5d2: add I2S clock muxing nodesCodrin Ciubotariu1-0/+18
This patch adds two clock muxes for the two I2S buses present on sama5d2 platforms. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-27ARM: dts: at91: sama5d2: Add resistive touch deviceEugen Hristev1-0/+10
Add generic resistive touch device which is connected to ADC block inside the SAMA5D2 SoC Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-27ARM: dts: at91: sama5d2: add channel cells for ADC deviceEugen Hristev1-0/+2
Preparing the ADC device to connect channel consumer drivers Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-27ARM: shmobile: Add basic RZ/A2 SoC supportChris Brandt3-0/+34
Add the RZ/A2 SoC to the Renesas SoC collection. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-27ARM: shmobile: r8a7779: Remove unused includesGeert Uytterhoeven1-2/+0
Presumable unused since commit c99cd90d98a98aa1 ("ARM: shmobile: r8a7779: Remove legacy SoC code"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-04 03:32:06 +0300