summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2011-06-01arm: omap2plus: move NAND_BLOCK_SIZE out of boardsIgor Grinberg8-14/+3
Several boards defining mtd partitions also defined NAND_BLOCK_SIZE as SZ_128K. Move the define to common-board-devices.h This removes multiple defines of NAND_BLOCK_SIZE. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01omap4: hwmod: Enable the keypadShubhrajyoti D1-1/+1
Commit 407a6888f7362cb3dabe69ea6d9dcf3c750dc56a (OMAP4: hwmod data: Add AESS, McPDM, bandgap, counter_32k, MMC, KBD, ISS & IPU) added the entry for keypad, but did not enable it. Enable the keypad in the hwmod database so it works. Signed-off-by: Shubhrajyoti D<shubhrajyoti@ti.com> Acked-by: Benoit Cousson<b-cousson@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01omap3: Free Beagle rev gpios when they are read, so others can read them laterTasslehoff Kjappfot1-0/+3
Free Beagle rev gpios when they are read, so others can read them later Signed-off-by: Tasslehoff Kjappfot <tasskjapp@gmail.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTCAlexander Holler1-0/+3
Without msecure beeing high it isn't possible to set (or start) the RTC. Tested with a BeagleBoard C4. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01omap: rx51: Don't power up speaker amplifier at bootupJarkko Nikula1-1/+1
Speaker amplifier is accidentally powered up in early TWL gpio setup. This causes a few mA of needless battery current consumption. Without this patch the amplifier can be shutdown only by having one active audio playback and shutdown cycle to speaker output. Thanks to Kalle Jokiniemi <kalle.jokiniemi@nokia.com> for noticing the issue. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01omap: rx51: Set regulator V28_A always onJarkko Nikula1-0/+1
The V28_A domain in Nokia N900 that supplies VDD voltages to TLV320AIC34 and TPA6130A2 should not be shutdown. This is because otherwise there will be leak from VIO to VDD in TLV320AIC34 and this leak consumes more battery current that is saved from keeping V28_A off. With this patch the battery current consumption is approximately 1.5 mA lower. Thanks to Kalle Jokiniemi <kalle.jokiniemi@nokia.com> for noticing the issue. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01ARM: OMAP4: MMC: no regulator off during probe for eMMCBalaji T K4-0/+8
eMMC does not handle power off when not in sleep state, Skip regulator disable during probe when eMMC is not in known state - state left by bootloader. Resolves eMMC failure on OMAP4 mmc0: error -110 whilst initialising MMC card Signed-off-by: Balaji T K <balajitk@ti.com> Tested-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01arm: omap2plus: fix ads7846 pendown gpio requestIgor Grinberg1-10/+10
introduced by: 96974a24 (omap: consolidate touch screen initialization among different boards) ads7846 driver can use either gpio_pendown or get_pendown_state() callback. In case of gpio_pendown, it requests the provided gpio_pendown thus resulting in double requesting that gpio: ads7846 spi1.0: failed to request pendown GPIO57 ads7846: probe of spi1.0 failed with error -16 Fix this by restricting the gpio request to the case of get_pendown_state() callback is used. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01ARM: OMAP2: Add missing iounmap in omap4430_phy_initTodd Poynor1-1/+3
!dev case needs iounmap before return. Signed-off-by: Todd Poynor <toddpoynor@google.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01ARM: omap4: Pass core and wakeup mux tables to omap4_mux_initColin Cross4-6/+9
OMAP4 contains two separate instances of the padconf registers, one in the core system config and one in the wakeup system config. Pass in two tables to apply the correct values to each instance. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01ARM: omap2+: mux: Allow board mux settings to be NULLColin Cross1-0/+3
OMAP4 has two mux instances, and the board may not have settings for one of them. Allow the board file to pass NULL for an instance's mux settings, which will initialize the mux instance but skip writing board settings. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01OMAP4: fix return value of omap4_l3_initRabin Vincent1-1/+1
Don't PTR_ERR() a non-error pointer: initcall omap4_l3_init+0x0/0xdc returned -544980480 after 0 usecs initcall omap4_l3_init+0x0/0xdc returned with error code -544980480 Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01OMAP: iovmm: fix SW flags passed by userOmar Ramirez Luna2-7/+0
Commit d038aee24dcd5a2a0d8547f5396f67ae9698ac8e "omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag", changes iovmm to receive flags specified by user, however the upper 16 bits of the flags are wiped by iovmm itself. This fixes IOVMF_DA_FIXED flags from being lost, and lets the user map its desired "device addresses". Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01arch/arm/mach-omap1/dma.c: Invert calls to platform_device_put and ↵Julia Lawall1-5/+6
platform_device_del Platform_device_del should be called before platform_device_put, as platform_device_put can delete the structure. Additionally, improve the error handling code for the call to ioremap, so that it calls platform_device_put. The semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2; @@ *platform_device_put(e1); ... when != e1 = e2 *platform_device_del(e1); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01OMAP2+: mux: fix compilation warningsGovindraj.R2-2/+2
Fix below compilation warnings. arch/arm/mach-omap2/omap_hwmod.c: In function 'omap_hwmod_for_each': arch/arm/mach-omap2/omap_hwmod.c:1631: warning: 'ret' may be used uninitialized in this function arch/arm/mach-omap2/mux.c: In function 'omap_mux_get_gpio': arch/arm/mach-omap2/mux.c:917: warning: 'm' may be used uninitialized in this function Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-31OMAP: SRAM: Fix warning: format '%08lx' expects type 'long unsigned int'Santosh Shilimkar1-6/+6
Fix below build warning. CC arch/arm/plat-omap/sram.o arch/arm/plat-omap/sram.c: In function 'omap_map_sram': arch/arm/plat-omap/sram.c:224: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'unsigned int' While at this, convert SRAM printk(* "") to pr_*(""). Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-31arm: omap3: cm-t3517: fix section mismatch warningIgor Grinberg1-1/+1
WARNING: arch/arm/mach-omap2/built-in.o(.text+0x11014): Section mismatch in reference from the function cm_t3517_init_usbh() to the (unknown reference) .init.data:(unknown) The function cm_t3517_init_usbh() references the (unknown reference) __initdata (unknown). This is often because cm_t3517_init_usbh lacks a __initdata annotation or the annotation of (unknown) is wrong. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-31OMAP2+: Fix 9 section mismatch(es) warnings from mach-omap2/built-in.oSantosh Shilimkar4-11/+11
The serial*_data should have been marked as __initdata as per it's usage in the board files. Fix the same to remove the section mismatch warnings caused by it. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Silesh C V <silesh@ti.com> [tony@atomide.com: updated with additional fixes from Silesh] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-31ARM: OMAP2: Add missing include of linux/gpio.hAxel Lin4-4/+4
I got some build error like below while executing "make omap2plus_defconfig". CC arch/arm/mach-omap2/board-2430sdp.o arch/arm/mach-omap2/board-2430sdp.c: In function 'omap_2430sdp_init': arch/arm/mach-omap2/board-2430sdp.c:247: error: 'GPIOF_OUT_INIT_LOW' undeclared (first use in this function) arch/arm/mach-omap2/board-2430sdp.c:247: error: (Each undeclared identifier is reported only once arch/arm/mach-omap2/board-2430sdp.c:247: error: for each function it appears in.) This patch fixes the build error by include linux/gpio.h instead of mach/gpio.h. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Syed Mohammed Khasim <x0khasim@ti.com> Cc: Grazvydas Ignotas <notasas@gmail.com> Cc: Steve Sakoman <steve@sakoman.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-31OMAP: fix compilation errorJanusz Krzysztofik1-0/+1
Forward-declare platform_device structure in arch/arm/plat-omap/include/plat/flash.h, otherwise compilation may break with: In file included from arch/arm/mach-omap1/flash.c:15: arch/arm/plat-omap/include/plat/flash.h:14: warning: 'struct platform_device' declared inside parameter list arch/arm/plat-omap/include/plat/flash.h:14: warning: its scope is only this definition or declaration, which is probably not what you want arch/arm/mach-omap1/flash.c:16: warning: 'struct platform_device' declared inside parameter list arch/arm/mach-omap1/flash.c:17: error: conflicting types for 'omap1_set_vpp' arch/arm/plat-omap/include/plat/flash.h:14: error: previous declaration of 'omap1_set_vpp' was here Detected and corrected while building for Amstrad Delta, confirmed with omap1_defconfig. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-28Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds19-5060/+110
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: gpio/pch_gpio: Support new device ML7223 gpio: make gpio_{request,free}_array gpio array parameter const GPIO: OMAP: move to drivers/gpio GPIO: OMAP: move register offset defines into <plat/gpio.h> gpio: Convert gpio_is_valid to return bool gpio: Move the s5pc100 GPIO to drivers/gpio gpio: Move the s5pv210 GPIO to drivers/gpio gpio: Move the exynos4 GPIO to drivers/gpio gpio: Move to Samsung common GPIO library to drivers/gpio gpio/nomadik: add function to read GPIO pull down status gpio/nomadik: show all pins in debug gpio: move Nomadik GPIO driver to drivers/gpio gpio: move U300 GPIO driver to drivers/gpio langwell_gpio: add runtime pm support gpio/pca953x: Add support for pca9574 and pca9575 devices gpio/cs5535: Show explicit dependency between gpio_cs5535 and mfd_cs5535
2011-05-28Merge branch 'setns'Linus Torvalds2-0/+2
* setns: ns: Wire up the setns system call Done as a merge to make it easier to fix up conflicts in arm due to addition of sendmmsg system call
2011-05-28ns: Wire up the setns system callEric W. Biederman2-0/+2
32bit and 64bit on x86 are tested and working. The rest I have looked at closely and I can't find any problems. setns is an easy system call to wire up. It just takes two ints so I don't expect any weird architecture porting problems. While doing this I have noticed that we have some architectures that are very slow to get new system calls. cris seems to be the slowest where the last system calls wired up were preadv and pwritev. avr32 is weird in that recvmmsg was wired up but never declared in unistd.h. frv is behind with perf_event_open being the last syscall wired up. On h8300 the last system call wired up was epoll_wait. On m32r the last system call wired up was fallocate. mn10300 has recvmmsg as the last system call wired up. The rest seem to at least have syncfs wired up which was new in the 2.6.39. v2: Most of the architecture support added by Daniel Lezcano <dlezcano@fr.ibm.com> v3: ported to v2.6.36-rc4 by: Eric W. Biederman <ebiederm@xmission.com> v4: Moved wiring up of the system call to another patch v5: ported to v2.6.39-rc6 v6: rebased onto parisc-next and net-next to avoid syscall conflicts. v7: ported to Linus's latest post 2.6.39 tree. >  arch/blackfin/include/asm/unistd.h     |    3 ++- >  arch/blackfin/mach-common/entry.S      |    1 + Acked-by: Mike Frysinger <vapier@gentoo.org> Oh - ia64 wiring looks good. Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-28Merge branch 'for_2.6.40/gpio-move' of ↵Grant Likely3-2113/+104
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into gpio/next
2011-05-28Merge git://git.infradead.org/mtd-2.6Linus Torvalds6-28/+2
* git://git.infradead.org/mtd-2.6: (97 commits) mtd: kill CONFIG_MTD_PARTITIONS mtd: remove add_mtd_partitions, add_mtd_device and friends mtd: convert remaining users to mtd_device_register() mtd: samsung onenand: convert to mtd_device_register() mtd: omap2 onenand: convert to mtd_device_register() mtd: txx9ndfmc: convert to mtd_device_register() mtd: tmio_nand: convert to mtd_device_register() mtd: socrates_nand: convert to mtd_device_register() mtd: sharpsl: convert to mtd_device_register() mtd: s3c2410 nand: convert to mtd_device_register() mtd: ppchameleonevb: convert to mtd_device_register() mtd: orion_nand: convert to mtd_device_register() mtd: omap2: convert to mtd_device_register() mtd: nomadik_nand: convert to mtd_device_register() mtd: ndfc: convert to mtd_device_register() mtd: mxc_nand: convert to mtd_device_register() mtd: mpc5121_nfc: convert to mtd_device_register() mtd: jz4740_nand: convert to mtd_device_register() mtd: h1910: convert to mtd_device_register() mtd: fsmc_nand: convert to mtd_device_register() ... Fixed up trivial conflicts in - drivers/mtd/maps/integrator-flash.c: removed in ARM tree - drivers/mtd/maps/physmap.c: addition of afs partition probe type clashing with removal of CONFIG_MTD_PARTITIONS
2011-05-28Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds184-6108/+1492
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits) ARM: 6945/1: Add unwinding support for division functions ARM: kill pmd_off() ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks ARM: 6943/1: mm: use TTBR1 instead of reserved context ID ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7 ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area ARM: add sendmmsg syscall ARM: 6863/1: allow hotplug on msm ARM: 6832/1: mmci: support for ST-Ericsson db8500v2 ARM: 6830/1: mach-ux500: force PrimeCell revisions ARM: 6829/1: amba: make hardcoded periphid override hardware ARM: 6828/1: mach-ux500: delete SSP PrimeCell ID ARM: 6827/1: mach-netx: delete hardcoded periphid ARM: 6940/1: fiq: Briefly document driver responsibilities for suspend/resume ARM: 6938/1: fiq: Refactor {get,set}_fiq_regs() for Thumb-2 ARM: 6914/1: sparsemem: fix highmem detection when using SPARSEMEM ARM: 6913/1: sparsemem: allow pfn_valid to be overridden when using SPARSEMEM at91: drop at572d940hf support at91rm9200: introduce at91rm9200_set_type to specficy cpu package at91: drop boot_params and PLAT_PHYS_OFFSET ...
2011-05-28Merge branches 'devel', 'devel-stable' and 'fixes' into for-linusRussell King174-6018/+1364
2011-05-28ARM: 6945/1: Add unwinding support for division functionsLaura Abbott1-5/+20
The software division functions never had unwinding annotations added. Currently, when a division by zero occurs the backtrace shown will stop at Ldiv0 or some completely unrelated function. Add unwinding annotations in hopes of getting a more useful backtrace when a division by zero occurs. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Acked-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-27Merge git://git.infradead.org/battery-2.6Linus Torvalds1-2/+25
* git://git.infradead.org/battery-2.6: PXA: Use dev_pm_ops in z2_battery ds2760_battery: Fix rated capacity of the hx4700 1800mAh battery ds2760_battery: Fix indexing of the 4 active full EEPROM registers power: Make test_power driver more dynamic. bq27x00_battery: Name of cycle count property max8903_charger: Add GENERIC_HARDIRQS as a dependency (fixes S390 build) ARM: RX-51: Enable isp1704 power on/off isp1704_charger: Allow board specific powering routine gpio-charger: Add gpio_charger_resume power_supply: Add driver for MAX8903 charger
2011-05-27GPIO: OMAP: move to drivers/gpioKevin Hilman2-2010/+1
Move OMAP GPIO driver to drivers/gpio. Builds whenever CONFIG_ARCH_OMAP=y. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-05-27GPIO: OMAP: move register offset defines into <plat/gpio.h>Kevin Hilman2-103/+103
Register offset defines are moved to <plat/gpio.h> so they can be used by SoC-specific device init code to fill out platform_data register offsets. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-05-27arm: use asm-generic/bitops/le.hAkinobu Mita1-38/+5
The previous style change enables to use asm-generic/bitops/le.h on arm. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27arch: add #define for each of optimized find bitopsAkinobu Mita1-0/+3
The style that we normally use in asm-generic is to test the macro itself for existence, so in asm-generic, do: #ifndef find_next_zero_bit_le extern unsigned long find_next_zero_bit_le(const void *addr, unsigned long size, unsigned long offset); #endif and in the architectures, write static inline unsigned long find_next_zero_bit_le(const void *addr, unsigned long size, unsigned long offset) #define find_next_zero_bit_le find_next_zero_bit_le This adds the #define for each of the optimized find bitops in the architectures. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27gpio: Move the s5pc100 GPIO to drivers/gpioKyungmin Park2-356/+1
Move the Samsung s5pc100 SoC GPIO driver to drivers/gpio Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-27gpio: Move the s5pv210 GPIO to drivers/gpioKyungmin Park2-289/+1
Move the Samsung s5pv210 SoC GPIO driver to drivers/gpio Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-27gpio: Move the exynos4 GPIO to drivers/gpioKyungmin Park2-366/+1
Move the Samsung Exynos4 series SoCs GPIO driver to drivers/gpio Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-27gpio: Move to Samsung common GPIO library to drivers/gpioKyungmin Park2-207/+0
It's common gpiolib for recent Samsung SoCs. Move to drivers/gpio Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-27gpio/nomadik: add function to read GPIO pull down statusRickard Andersson1-0/+2
Signed-off-by: Rickard Andersson <rickard.andersson@stericsson.com> Reviewed-by: Martin Persson <martin.persson@stericsson.com> [Split off from larger patch] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-27gpio: move Nomadik GPIO driver to drivers/gpioGrant Likely5-1028/+0
This moves the Nomadik GPIO driver out of arch/arm/plat-nomadik and into the desired location indicated by the subsystem maintainer. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [grant.likely: squashed with kconfig fixup] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-27gpio: move U300 GPIO driver to drivers/gpioLinus Walleij2-701/+1
This moves the U300 GPIO driver out of arch/arm/mach-u300 and into the desired location indicated by the subsystem maintainer. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26Merge branch 'for-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (57 commits) regulator: Fix 88pm8607.c printk format warning input: Add support for Qualcomm PMIC8XXX power key input: Add Qualcomm pm8xxx keypad controller driver mfd: Add omap-usbhs runtime PM support mfd: Fix ASIC3 SD Host Controller Configuration size mfd: Fix omap_usbhs_alloc_children error handling mfd: Fix omap usbhs crash when rmmoding ehci or ohci mfd: Add ASIC3 LED support leds: Add ASIC3 LED support mfd: Update twl4030-code maintainer e-mail address mfd: Correct the name and bitmask for ab8500-gpadc BTempPullUp mfd: Add manual ab8500-gpadc batt temp activation for AB8500 3.0 mfd: Provide ab8500-core enumerators for chip cuts mfd: Check twl4030-power remove script error condition after i2cwrite mfd: Fix twl6030 irq definitions mfd: Add phoenix lite (twl6025) support to twl6030 mfd: Avoid to use constraint name in 88pm860x regulator driver mfd: Remove checking on max8925 regulator[0] mfd: Remove unused parameter from 88pm860x API mfd: Avoid to allocate 88pm860x static platform data ...
2011-05-26Merge branch 'omap-for-linus' of ↵Linus Torvalds49-3043/+1110
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (33 commits) OMAP3: PM: Boot message is not an error, and not helpful, remove it OMAP3: cpuidle: change the power domains modes determination logic OMAP3: cpuidle: code rework for improved readability OMAP3: cpuidle: re-organize the C-states data OMAP3: clean-up mach specific cpuidle data structures OMAP3 cpuidle: remove useless SDP specific timings usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled usb: otg: OMAP4430: Fixing the omap4430_phy_init function usb: musb: am35x: fix compile error when building am35x usb: musb: OMAP4430: Power down the PHY during board init omap: drop board-igep0030.c omap: igep0020: add support for IGEP3 omap: igep0020: minor refactoring omap: igep0020: name refactoring for future merge with IGEP3 omap: Remove support for omap2evm arm: omap2plus: GPIO cleanup omap: musb: introduce default board config omap: move detection of NAND CS to common-board-devices omap: use common initialization for PMIC i2c bus omap: consolidate touch screen initialization among different boards ...
2011-05-26ARM: kill pmd_off()Russell King1-6/+1
pmd_off() has only one user, so lets consolidate this into its only user. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-26mfd: Modifying the twl4030-power macro name Main_Ref to all capsLesly A M1-1/+1
Modifying the macro name Main_Ref to all caps(MAIN_REF). Suggested by Nishanth Menon <nm@ti.com> Signed-off-by: Lesly A M <leslyam@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: David Derrick <dderrick@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26ARM: 6944/1: mm: allow ASID 0 to be allocated to tasksWill Deacon1-3/+3
Now that ASID 0 is no longer used as a reserved value, allow it to be allocated to tasks. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-26ARM: 6943/1: mm: use TTBR1 instead of reserved context IDWill Deacon2-11/+10
On ARMv7 CPUs that cache first level page table entries (like the Cortex-A15), using a reserved ASID while changing the TTBR or flushing the TLB is unsafe. This is because the CPU may cache the first level entry as the result of a speculative memory access while the reserved ASID is assigned. After the process owning the page tables dies, the memory will be reallocated and may be written with junk values which can be interpreted as global, valid PTEs by the processor. This will result in the TLB being populated with bogus global entries. This patch avoids the use of a reserved context ID in the v7 switch_mm and ASID rollover code by temporarily using the swapper_pg_dir pointed at by TTBR1, which contains only global entries that are not tagged with ASIDs. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-26ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7Catalin Marinas5-4/+13
This patch makes TTBR1 point to swapper_pg_dir so that global, kernel mappings can be used exclusively on v6 and v7 cores where they are needed. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-26ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_areaWill Deacon2-0/+3
The v6 and v7 implementations of flush_kern_dcache_area do not align the passed MVA to the size of a cacheline in the data cache. If a misaligned address is used, only a subset of the requested area will be flushed. This has been observed to cause failures in SMP boot where the secondary_data initialised by the primary CPU is not cacheline aligned, causing the secondary CPUs to read incorrect values for their pgd and stack pointers. This patch ensures that the base address is cacheline aligned before flushing the d-cache. Cc: <stable@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-26ARM: add sendmmsg syscallRussell King2-0/+2
Commit 228e548e (net: Add sendmmsg socket system call) added the new sendmmsg syscall. Add this to the syscall table for ARM. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-26ARM: 6863/1: allow hotplug on msmJeffrey Ohlstein1-1/+0
Hotplug support was added in 9f1890a (msm: hotplug: support cpu hotplug on msm, 2010-12-02) Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-23 23:01:10 +0300