summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2009-05-18[ARM] S3C24XX: GPIO: Remove s3c2410_gpio_irq2pin() callBen Dooks2-27/+0
Remove the s3c2410_gpio_irq2pin() function as it is not being used in any in kernel driver and the function is probably not being used anywhere else. This is also part of the effort to remove any of the s3c24xx gpio specific code that cannot be recreated by using the gpiolib framework now in the kernel. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C64XX: Add ARM clockBen Dooks4-4/+80
Add ARM clock to provide 'arm' from the APLL to the ARM core. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C64XX: Configure clocks for DMA controllerMark Brown1-0/+12
Add missing DMA controller block clocks. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C64XX: Add HCLKx2Werner Almesberger3-0/+9
Add doubled HCLK to S3C64xx. Signed-off-by: Werner Almesberger <werner@openmoko.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C6410: Add CAMIF clockWerner Almesberger1-0/+29
Add camera interface clock to S3C6410. Signed-off-by: Werner Almesberger <werner@openmoko.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] Merge next-s3c-s3c6410 into for-rmk-develBen Dooks5-0/+586
Merge branch 'next-s3c-s3c6410' into for-rmk-devel
2009-05-07[ARM] SMDK6400: Fix WM8753 i2c board definitionBen Dooks1-1/+1
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C64XX: Add S3C6400 SDHCI setup supportBen Dooks10-40/+187
Add support for S3C6400 SDHCI channels 0 and 1, making the GPIO code common to both S3C6400 and S3C6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C64XX: Add S3C6400 CPU detection.Ben Dooks1-0/+8
Add detection support for the S3C6400 SoC which has it's id register in a different place to the S3C6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C6400: Core support for S3C6400 SoCBen Dooks4-4/+95
Add the core support files for the Samsung S3C6400 SoC. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] SMDK6400: Initial machine support for SMDK6400Ben Dooks3-0/+109
Add minimial support for the SMDK6400 board to test the S3C6400 support. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] VIC: Add power management deviceBen Dooks7-14/+228
Add power management support to the VIC by registering each VIC as a system device to get suspend/resume events going. Since the VIC registeration is done early, we need to record the VICs in a static array which is used to add the system devices later once the initcalls are run. This means there is now a configuration value for the number of VICs in the system. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C: GPIO PM core GPIOlib integrationBen Dooks8-226/+438
Move the GPIO suspend/resume support inline with the gpiolib support so that it will work with both the S3C24XX and S3C64XX series. The s3c_gpio_chip is extended to have a pm callback and a save block to keep the state of the GPIO over suspend, and the code from the s3c24xx implementation is added to a new common file. The suspend process now uses the list of registered chips to go through saving and restoring each one as appropriate, using the pm callback to select the appropriate routine depending on the type of control register present. This change also means that any additional GPIO added should not require changes to the PM. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C64XX: Add IRQ PM codeBen Dooks4-3/+119
Add support for saving the state of the IRQ registers over suspend. This requires moving the S3C64XX UART registers into <plat/regs-serial.h> and adding irq-pm.c which saves the state of all the IRQ registers. The irq-pm.c saves all the IRQ registers, including the IRQ_EINT and IRQ_EINT_GROUP registers as it was easier than adding three different files. Also ensuring that all the registers are restored to the same state as before suspend is considered to be the best thing to do. Note, we do not suspend the VIC here, this is done by the VIC driver itself. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C64XX: Add generic s3c64xx sys device.Ben Dooks2-0/+21
Add an s3c64xx_sysclass and device for items that currently want to bind to any s3c64xx processor. The first user of this will be parts of the s3c64xx suspend support which need to save device state over suspend/resume. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C64XX: Add s3c6410_sysclass exportBen Dooks1-0/+1
Add definition for s3c6410_sysclass which was missing from arch/arm/plat-s3c/include/plat/cpu.h. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C64XX: Initial support for PM (suspend to RAM)Ben Dooks11-2/+479
Add the initial support for the S3C64XX based systems to use suspend-to-RAM to sleep. Includes basic debugging for use with the SMDK6410 usign the LEDs on the baseboard. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C: PM save UART UDIVSLOT if doing PMBen Dooks2-0/+11
Add the facility to save the UART UDIVSLOT register if the UART state is being saved over suspend. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C: Add debug to UART save and a per-arch callback pre-restoreBen Dooks2-0/+10
Add a simple debug message on saving the UART state and add a per-arch pre-restore function to be used by the s3c64xx restore code to ensure the UARTs control registers do not go through any illegal state changes. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C64XX: Add USB OHCI supportBen Dooks2-0/+4
Add USB OHCI host definitions. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C: Rename S3C24XX_PA_USBHOST to S3C_PA_USBHOSTBen Dooks3-4/+3
The USB host base address is available on both the S3C24XX and S3C64XX ranges. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] SMDK6410: Add USB OHCI hostBen Dooks2-0/+2
Add USB OHCI host capability to the SMDK6410 for either USB OtG or a single/double USB host port. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C: Add common USB OHCI device definitionBen Dooks7-30/+72
Add common definition for USB OHCI platform device, add a Kconfig to selectively compile it and add update all the users. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Hook regulator control of VDDARM up for WM1190-EV1Mark Brown1-0/+9
This allows the S3C CPUfreq driver to do DVFS. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[PATCH] S3C64XX: Basic A&W6410 board support patch V2Kwangwoo Lee3-0/+256
A&W6410 board uses Samsung S3C6410 SoC and it is registered with 2183. Framebuffer and ethernet devices are supported currently. Unnecessary header file is removed. Fix to use __raw_writel() and __raw_readl() for accessing mapped address. Thank you for your comments. Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Mark all supplies as always_onMark Brown1-0/+3
Since no consumers are currently configured for the SMDK6410 mark all the supplies on the board as being always_on, ensuring interoperability with future regulator API changes to disable unused regulators. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Use active high IRQ for the WM8350 on the WM1190-EV1Mark Brown1-0/+1
Using an active high IRQ ensures that the WM8350 interrupt handling does not spin when used with a SMDK6410 which has not had R20 removed and R21 fitted to connect EINT12 to the PMIC module rather thant the fixed regulators on the CPU module. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] S3C6410: Basic support for NCP board (v2)Kyungmin Park3-0/+117
This is a basic support for NCP board based on s3c6410. Only enables the serial. also remove empty i2c device. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Support WM1190-EV1 PMIC boardMark Brown2-0/+148
The SMDK6410 supports pluggable PMIC boards. One such board is the Wolfson Microelectronics 1190-EV1 for the WM8350 PMICs. This patch introduces initial support for this module. Further patches will add additional integration with the system as support for the S3C6410 and other devices on the system improves. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Add support for SMSC9115 ethernet controllerMark Brown1-0/+35
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Ensure LCD settings are setupBen Dooks1-0/+17
Ensure that the LCD output type is RGB and that the modem interface is not bypassing the LCD block. This ensures the LCD interface output gets to the pins in the correct format. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-28arm: Use __INIT macro instead of .text.init.Tim Abbott4-4/+8
arm is placing some code in the .text.init section, but it does not reference that section in its linker scripts. This change moves this code from the .text.init section to the .init.text section, which is presumably where it belongs. Signed-off-by: Tim Abbott <tabbott@mit.edu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-24Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds38-164/+298
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5460/1: Orion: reduce namespace pollution [ARM] 5458/1: pcmcia: pxa2xx-sharpsl: check if we do have Scoop config [ARM] 5457/1: mach-imx gpio buildfix [ARM] 5456/1: add sys_preadv and sys_pwritev [ARM] pxa/pcm990: start external GPIOs immediately after built-in ones [ARM] pxa/palm27x: General fix for Palm27x aSoC driver [ARM] pxa/mioa701: use GPIO95 as AC97 reset line [ARM] pxa: merge AC97 platform data structures [ARM] pxa/magician: remove un-necessary #include of pxa-regs.h and hardware.h
2009-04-24[ARM] 5460/1: Orion: reduce namespace pollutionNicolas Pitre28-147/+222
Symbols like SOFT_RESET are way too generic to be exported at large. To avoid this, let's move the mbus bridge register defines into a separate file and include it where needed. This affects mach-kirkwood, mach-loki, mach-mv78xx0 and mach-orion5x simultaneously as they all share code in plat-orion which relies on those defines. Some other defines have been moved to narrower scopes, or simply deleted when they had no user. This fixes compilation problem with mpt2sas on the above listed platforms. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-22clocksource: pass clocksource to read() callbackMagnus Damm16-18/+18
Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21Separate out common fstatat code into vfs_fstatatOleg Drokin1-14/+5
This is a version incorporating Christoph's suggestion. Separate out common *fstatat functionality into a single function instead of duplicating it all over the code. Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-04-20Merge branch 'fix' of ↵Russell King7-17/+71
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-04-20[ARM] 5457/1: mach-imx gpio buildfixDavid Brownell1-0/+1
From: David Brownell <dbrownell@users.sourceforge.net> Fix GPIO-related build error on mach-imx platform: CC drivers/spi/spi_gpio.o In file included from /home/db/kernel/scratch/arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:7, from drivers/spi/spi_gpio.c:23: arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_get_value': arch/arm/mach-imx/include/mach/gpio.h:27: error: implicit declaration of function '__REG2' arch/arm/mach-imx/include/mach/gpio.h:27: error: 'IMX_IO_BASE' undeclared (first use in this function) arch/arm/mach-imx/include/mach/gpio.h:27: error: (Each undeclared identifier is reported only once arch/arm/mach-imx/include/mach/gpio.h:27: error: for each function it appears in.) arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_set_value_inline': arch/arm/mach-imx/include/mach/gpio.h:36: error: 'IMX_IO_BASE' undeclared (first use in this function) arch/arm/mach-imx/include/mach/gpio.h:36: error: lvalue required as left operand of assignment arch/arm/mach-imx/include/mach/gpio.h:38: error: lvalue required as left operand of assignment ... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-20[ARM] 5456/1: add sys_preadv and sys_pwritevMikael Pettersson2-0/+4
Kernel 2.6.30-rc1 added sys_preadv and sys_pwritev to most archs but not ARM, resulting in <stdin>:1421:2: warning: #warning syscall preadv not implemented <stdin>:1425:2: warning: #warning syscall pwritev not implemented This patch adds sys_preadv and sys_pwritev to ARM. These syscalls simply take five long-sized parameters, so they should have no calling-convention/ABI issues in the kernel. Tested on armv5tel eabi using a preadv/pwritev test program posted on linuxppc-dev earlier this month. It would be nice to get this into the kernel before 2.6.30 final, so that glibc's kernel version feature test for these syscalls doesn't have to special-case ARM. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-19[ARM] pxa/pcm990: start external GPIOs immediately after built-in onesGuennadi Liakhovetski1-3/+3
As a result of an off-by-1 error pcm990 leaves one unused GPIO number between built-in GPIOs and the pca9536 extender. Fix it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-19[ARM] pxa/palm27x: General fix for Palm27x aSoC driverMarek Vasut4-13/+53
Firstly, this patch makes the palm27x asoc driver a little more sane. Also, since all affected devices use GPIO95 as AC97_nRESET, this patch sets that properly. Affected are PalmT5, TX and LifeDrive. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-18Merge branch 'defconfig-s3c2410' of git://aeryn.fluff.org.uk/bjdooks/linuxRussell King1-182/+930
2009-04-18Merge branch 'v2630-rc2-fixes' of git://aeryn.fluff.org.uk/bjdooks/linuxRussell King8-7/+30
2009-04-17[ARM] S3C24XX: ADC: Check pending queue before freeing adc clientRamax Lo1-0/+17
Check pending queue and remove the adc client being released. Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-17[ARM] S3C: Fix ADC driver sparse warningBen Dooks1-1/+1
The symbol 's3c_adc_try' in arch/arm/plat-s3c24xx/adc.c does not need to be exported and thus should be static. This fixes the following sparse warning: adc.c:103:6: warning: symbol 's3c_adc_try' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-17[ARM] Osiris: Fix double initialisation in machine blockBen Dooks1-1/+0
The .init_machine entry in mach-osiris.c had the same entry twice, so remove one definition to fix the following warning from sparse: mach-osiris.c:416:3: warning: Initializer entry defined twice mach-osiris.c:418:3: also defined here Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-17[ARM] Anubis: Fix sparse warnings for items that should be staticBen Dooks1-1/+1
Make 'anubis_ide_platdata' statis as it is not used outside the file it is in, fixing the following sparse warning: mach-anubis.c:246:27: warning: symbol 'anubis_ide_platdata' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-17[ARM] JIVE: Fix sparse warnings about items which should be staticBen Dooks1-2/+2
Make 'jive_vgg2432a4_display' and 'jive_lcd_config' static as they are not exported, and are generating the following sparse warnings: mach-jive.c:280:26: warning: symbol 'jive_vgg2432a4_display' was not declared. Should it be static? mach-jive.c:313:28: warning: symbol 'jive_lcd_config' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-17[ARM] S3C: Fix sparse warning from missing 's3c_device_hwmon'Ben Dooks1-0/+1
Fix the following sparse warning due to s3c_device_hwmon being missing from <plat/devs.h> devs.c:380:24: warning: symbol 's3c_device_hwmon' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-17[ARM] S3C24XX: Fix sparse error in gpiolib.cBen Dooks1-1/+1
Fix the following sparse error generated by including <plat/gpio-core.h> instead of <mach/gpio-core.h> gpiolib.c:78:22: warning: symbol 's3c24xx_gpios' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-13 06:27:49 +0300