summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2020-01-17Merge tag 'armsoc-fixes' of ↵Linus Torvalds23-834/+74
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I've been sitting on these longer than I meant, so the patch count is a bit higher than ideal for this part of the release. There's also some reverts of double-applied patches that brings the diffstat up a bit. With that said, the biggest changes are: - Revert of duplicate i2c device addition on two Aspeed (BMC) Devicetrees. - Move of two device nodes that got applied to the wrong part of the tree on ASpeed G6. - Regulator fix for Beaglebone X15 (adding 12/5V supplies) - Use interrupts for keys on Amlogic SM1 to avoid missed polls In addition to that, there is a collection of smaller DT fixes: - Power supply assignment fixes for i.MX6 - Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit - Build fixlets (selects) for davinci/omap2+ - More interrupt number fixes for Stratix10, Amlogic SM1, etc. - ... and more similar fixes across different platforms And some non-DT stuff: - optee fix to register multiple shared pages properly - Clock calculation fixes for MMP3 - Clock fixes for OMAP as well" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits) MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support ARM: dts: imx6sll-evk: Remove incorrect power supply assignment ARM: dts: imx6sl-evk: Remove incorrect power supply assignment ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL ARM: omap2plus: select RESET_CONTROLLER ARM: davinci: select CONFIG_RESET_CONTROLLER ARM: dts: aspeed: rainier: Fix fan fault and presence ARM: dts: aspeed: rainier: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Remove duplicate flash nodes ARM: dts: aspeed: tacoma: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Fix fsi master node ARM: dts: aspeed-g6: Fix FSI master location ARM: dts: mmp3: Fix the TWSI ranges clk: mmp2: Fix the order of timer mux parents ARM: mmp: do not divide the clock rate arm64: dts: rockchip: Fix IR on Beelink A1 optee: Fix multi page dynamic shm pool alloc ...
2020-01-11Merge tag 'sunxi-fixes-for-5.5' of ↵Olof Johansson1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A couple of fixes for GPIO polarity and regulators on the A64 olinuxino. * tag 'sunxi-fixes-for-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarity arm64: dts: allwinner: a64: olinuxino: Fix SDIO supply regulator arm64: dts: allwinner: a64: olinuxino: Fix eMMC supply regulator Link: https://lore.kernel.org/r/582f4fda-38af-43e8-af58-957aee5b9dd8.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-11Merge tag 'imx-fixes-5.5-2' of ↵Olof Johansson10-25/+9
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.5, round 2: - Fix i.MX8MM SDMA1 AHB clock setting to remove a "Timeout waiting for CH0" error seen with UART1. - Correct compatible of RV3029 RTC device on imx6q-dhcom board. - Correct interrupt trigger type for magnetometer on board imx8mq-librem5-devkit. - A series from Anson Huang to fix vdd3p0 power supplier for a few NXP development board. - Fix imx6q-icore-mipi board to use 1.5 version of i.Core MX6DL, so that Ethernet interface on the board works properly. - Fix Toradex Colibri board to get NAND flash support back. - Fix SGTL5000 VDDIO regulator connection for imx6q-dhcom, which is connected to PMIC SW2 output rather than a fixed 3V3 rail. - Fix 'reg' of CPU node on imx7ulp to get rid of a warning given by kernel. - Fix endian setting for DCFG on LS1028A SoC, so that register access of DCFG becomes correct. * tag 'imx-fixes-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support ARM: dts: imx6sll-evk: Remove incorrect power supply assignment ARM: dts: imx6sl-evk: Remove incorrect power supply assignment ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL arm64: dts: imx8mq-librem5-devkit: use correct interrupt for the magnetometer ARM: dts: imx6q-dhcom: Fix SGTL5000 VDDIO regulator connection ARM: dts: imx7ulp: fix reg of cpu node arm64: dts: imx8mm: Change SDMA1 ahb clock for imx8mm arm64: dts: ls1028a: fix endian setting for dcfg ARM: dts: imx6q-dhcom: fix rtc compatible Link: https://lore.kernel.org/r/20200110011836.GW4456@T480 Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-11Merge tag 'amlogic-fixes' of ↵Olof Johansson1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes arm-soc: Amlogic fixes for v5.5-rc * tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt dt-bindings: reset: meson8b: fix duplicate reset IDs soc: amlogic: meson-ee-pwrc: propagate errors from pm_genpd_init() soc: amlogic: meson-ee-pwrc: propagate PD provider registration errors ARM: dts: meson8: fix the size of the PMU registers arm64: dts: meson-sm1-sei610: gpio-keys: switch to IRQs Link: https://lore.kernel.org/r/7hmuaweavi.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-09ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash supportMarcel Ziswiler1-0/+4
Turns out when introducing the eMMC version the gpmi node required for NAND flash support got enabled exclusively on Colibri iMX7D 512MB. Fixes: f928a4a377e4 ("ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support") Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6sll-evk: Remove incorrect power supply assignmentAnson Huang1-4/+0
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT PMIC's power supply, the vdd3p0 LDO's target output voltage can be controlled by SW, and it requires input voltage to be high enough, with incorrect power supply assigned, if the power supply's voltage is lower than the LDO target output voltage, it will return fail and skip the LDO voltage adjustment, so remove the power supply assignment for vdd3p0 to avoid such scenario. Fixes: 96a9169cf621 ("ARM: dts: imx6sll-evk: Assign corresponding power supply for vdd3p0") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6sl-evk: Remove incorrect power supply assignmentAnson Huang1-4/+0
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT PMIC's power supply, the vdd3p0 LDO's target output voltage can be controlled by SW, and it requires input voltage to be high enough, with incorrect power supply assigned, if the power supply's voltage is lower than the LDO target output voltage, it will return fail and skip the LDO voltage adjustment, so remove the power supply assignment for vdd3p0 to avoid such scenario. Fixes: 3feea8805d6f ("ARM: dts: imx6sl-evk: Assign corresponding power supply for LDOs") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6sx-sdb: Remove incorrect power supply assignmentAnson Huang2-8/+0
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT PMIC's power supply, the vdd3p0 LDO's target output voltage can be controlled by SW, and it requires input voltage to be high enough, with incorrect power supply assigned, if the power supply's voltage is lower than the LDO target output voltage, it will return fail and skip the LDO voltage adjustment, so remove the power supply assignment for vdd3p0 to avoid such scenario. Fixes: 37a4bdead109 ("ARM: dts: imx6sx-sdb: Assign corresponding power supply for LDOs") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignmentAnson Huang1-4/+0
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT PMIC's power supply, the vdd3p0 LDO's target output voltage can be controlled by SW, and it requires input voltage to be high enough, with incorrect power supply assigned, if the power supply's voltage is lower than the LDO target output voltage, it will return fail and skip the LDO voltage adjustment, so remove the power supply assignment for vdd3p0 to avoid such scenario. Fixes: 93385546ba36 ("ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DLJagan Teki1-1/+1
The EDIMM STARTER KIT i.Core 1.5 MIPI Evaluation is based on the 1.5 version of the i.Core MX6 cpu module. The 1.5 version differs from the original one for a few details, including the ethernet PHY interface clock provider. With this commit, the ethernet interface works properly: SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver While before using the 1.5 version, ethernet failed to startup do to un-clocked PHY interface: fec 2188000.ethernet eth0: could not attach to PHY Similar fix has merged for i.Core MX6Q but missed to update for DL. Fixes: a8039f2dd089 ("ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support") Cc: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-08Merge tag 'aspeed-5.5-devicetree-fixes' of ↵Olof Johansson3-785/+26
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/fixes ASPEED device tree fixes for 5.5 Fixes for some badly applied patches that went in to 5.5. There is also a fix for an incorrect i2c address. * tag 'aspeed-5.5-devicetree-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: rainier: Fix fan fault and presence ARM: dts: aspeed: rainier: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Remove duplicate flash nodes ARM: dts: aspeed: tacoma: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Fix fsi master node ARM: dts: aspeed-g6: Fix FSI master location Link: https://lore.kernel.org/r/CACPK8XcjazgORXNZBU1ECMukXG4HA8D9VeDxiSPifDk_iB7_dw@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-08ARM: omap2plus: select RESET_CONTROLLERArnd Bergmann1-1/+2
With the new omap_prm driver added unconditionally, omap2 builds fail when the reset controller subsystem is disabled: drivers/soc/ti/omap_prm.o: In function `omap_prm_probe': omap_prm.c:(.text+0x2d4): undefined reference to `devm_reset_controller_register' Link: https://lore.kernel.org/r/20191216132132.3330811-1-arnd@arndb.de Fixes: 3e99cb214f03 ("soc: ti: add initial PRM driver with reset control support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-08ARM: davinci: select CONFIG_RESET_CONTROLLERArnd Bergmann1-0/+1
Selecting RESET_CONTROLLER is actually required, otherwise we can get a link failure in the clock driver: drivers/clk/davinci/psc.o: In function `__davinci_psc_register_clocks': psc.c:(.text+0x9a0): undefined reference to `devm_reset_controller_register' drivers/clk/davinci/psc-da850.o: In function `da850_psc0_init': psc-da850.c:(.text+0x24): undefined reference to `reset_controller_add_lookup' Link: https://lore.kernel.org/r/20191210195202.622734-1-arnd@arndb.de Fixes: f962396ce292 ("ARM: davinci: support multiplatform build for ARM v5") Cc: <stable@vger.kernel.org> # v5.4 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-08ARM: dts: aspeed: rainier: Fix fan fault and presenceBrandon Wyman1-2/+2
The PCA9552 used for fan fault and presence information is at address 61h, not 60h. Fixes: 2efc118ce3c3 ("ARM: dts: aspeed: rainier: Add i2c devices") Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-08ARM: dts: aspeed: rainier: Remove duplicate i2c bussesJoel Stanley1-365/+0
This is a revert of "ARM: dts: aspeed: rainier: Add i2c devices", which was already applied to the tree. Fixes: 9c44db7096e0 ("ARM: dts: aspeed: rainier: Add i2c devices") Reviewed-by: Jim Wright <wrightj@linux.vnet.ibm.com> Tested-by: Jim Wright <wrightj@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-08ARM: dts: aspeed: tacoma: Remove duplicate flash nodesJoel Stanley1-31/+0
This is a revert of "ARM: dts: aspeed: tacoma: Enable FMC and SPI devices" which was already applied as part of "ARM: dts: aspeed: Add Tacoma machine". Fixes: 8737481e381c ("ARM: dts: aspeed: tacoma: Enable FMC and SPI devices") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-08ARM: dts: aspeed: tacoma: Remove duplicate i2c bussesJoel Stanley1-367/+0
This is a revert of "ARM: dts: aspeed: tacoma: Enable I2C busses", which was already applied as part of "ARM: dts: aspeed: Add Tacoma machine". Fixes: 606bcdde6724 ("ARM: dts: aspeed: tacoma: Enable I2C busses") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-08ARM: dts: aspeed: tacoma: Fix fsi master nodeJoel Stanley1-0/+5
This was broken when applying "ARM: dts: aspeed: tacoma: Add host FSI description". Fixes: a981c93300ef ("ARM: dts: aspeed: tacoma: Add host FSI description") Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-08ARM: dts: aspeed-g6: Fix FSI master locationJoel Stanley1-20/+19
The FIS nodes were placed incorrectly in the device tree. Fixes: 0fe4e304782c ("ARM: dts: aspeed-g6: Describe FSI masters") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-07Merge tag 'omap-for-v5.5/fixes-rc5' of ↵Olof Johansson4-14/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.5-rc cycle Here are few fixes for v5.5-rc cycle: - Two corner case fixes related to ti-sysc driver clock issues - Fixes for am57xx dts for pcie gpios - Beagle-x15 regulator dts fix - Fix for wkup_m3_ipc driver race * tag 'omap-for-v5.5/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: soc: ti: wkup_m3_ipc: Fix race condition with rproc_boot ARM: dts: beagle-x15-common: Model 5V0 regulator ARM: dts: am571x-idk: Fix gpios property to have the correct gpio number ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes bus: ti-sysc: Fix iterating over clocks ARM: OMAP2+: Fix ti_sysc_find_one_clockdomain to check for to_clk_hw_omap Link: https://lore.kernel.org/r/pull-1578418121-413328@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-07arm: Implement copy_thread_tlsAmanieu d'Antras2-3/+4
This is required for clone3 which passes the TLS value through a struct rather than a register. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: <stable@vger.kernel.org> # 5.3.x Link: https://lore.kernel.org/r/20200102172413.654385-4-amanieu@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-01-06ARM: dts: mmp3: Fix the TWSI rangesLubomir Rintel1-6/+6
The register blocks don't occupy 4K. In fact, some blocks are packed close to others and assuming they're 4K causes overlaps: pxa2xx-i2c d4033800.i2c: can't request region for resource [mem 0xd4033800-0xd40347ff] Link: https://lore.kernel.org/r/20191220071443.247183-1-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-06ARM: mmp: do not divide the clock rateLubomir Rintel1-1/+1
This was done because the clock driver returned the wrong rate, which is fixed in "clk: mmp2: Fix the order of timer mux parents" patch. Link: https://lore.kernel.org/r/20191218190454.420358-2-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-23ARM: dts: imx6q-dhcom: Fix SGTL5000 VDDIO regulator connectionMarek Vasut1-1/+1
The SGTL5000 VDDIO is connected to the PMIC SW2 output, not to a fixed 3V3 rail. Describe this correctly in the DT. Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23ARM: dts: imx7ulp: fix reg of cpu nodePeng Fan1-2/+2
According to arm cpus binding doc, " On 32-bit ARM v7 or later systems this property is required and matches the CPU MPIDR[23:0] register bits. Bits [23:0] in the reg cell must be set to bits [23:0] in MPIDR. All other bits in the reg cell must be set to 0. " In i.MX7ULP, the MPIDR[23:0] is 0xf00, not 0, so fix it. Otherwise there will be warning: "DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map" Fixes: 20434dc92c05 ("ARM: dts: imx: add common imx7ulp dtsi support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23ARM: dts: imx6q-dhcom: fix rtc compatibleAlexandre Belloni1-1/+1
The only correct and documented compatible string for the rv3029 is microcrystal,rv3029. Fix it up. Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-18ARM: dts: beagle-x15-common: Model 5V0 regulatorKishon Vijay Abraham I1-0/+21
On am57xx-beagle-x15, 5V0 is connected to P16, P17, P18 and P19 connectors. On am57xx-evm, 5V0 regulator is used to get 3V6 regulator which is connected to the COMQ port. Model 5V0 regulator here in order for it to be used in am57xx-evm to model 3V6 regulator. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: am571x-idk: Fix gpios property to have the correct gpio numberKishon Vijay Abraham I1-1/+1
commit d23f3839fe97d8dce03d ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") while adding the dt node for EP mode for DRA7 platform, added rc node for am571x-idk and populated gpios property with "gpio3 23". However the GPIO_PCIE_SWRST line is actually connected to "gpio5 18". Fix it here. (The patch adding "gpio3 23" was tested with another am57x board in EP mode which doesn't rely on reset from host). Cc: stable <stable@vger.kernel.org> # 4.14+ Fixes: d23f3839fe97d8dce03d ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodesKishon Vijay Abraham I3-12/+0
PERST# line in the PCIE connector is driven by the host mode and not EP mode. The gpios property here is used for driving the PERST# line. Remove gpios property from all endpoint device tree nodes. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarityMarek Szyprowski1-1/+1
Current USB3503 driver ignores GPIO polarity and always operates as if the GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing USB3503 chip applications to match the chip specification and common convention for naming the pins. The only pin, which has to be ACTIVE_LOW is the reset pin. The remaining are ACTIVE_HIGH. This change allows later to fix the USB3503 driver to properly use generic GPIO bindings and read polarity from DT. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-17Merge tag 'armsoc-fixes' of ↵Linus Torvalds17-27/+54
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I didn't get a batch in this weekend, so here's what we queued up last week and today. - A couple of defconfigs add back debugfs -- it used to be implicitly enabled through CONFIG_TRACING, but 0e4a459f56c32d3e ("tracing: Remove unnecessary DEBUG_FS dependency") removed that. - The rest are mostly minor fixlets of the usual kind; some DT tweaks, a headerfile refactor that needs a build fix now, etc" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits) ARM: bcm: Add missing sentinel to bcm2711_compat[] ARM: shmobile: defconfig: Restore debugfs support bus: ti-sysc: Fix missing reset delay handling ARM: imx: Fix boot crash if ocotp is not found ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS ARM: dts: imx6ul-evk: Fix peripheral regulator arm64: dts: ls1028a: fix reboot node ARM: mmp: include the correct cputype.h ARM: dts: am437x-gp/epos-evm: fix panel compatible arm64: dts: ls1028a: fix typo in TMU calibration data ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs ARM: dts: bcm283x: Fix critical trip point ARM: omap2plus_defconfig: Add back DEBUG_FS ARM: omap2plus_defconfig: enable NET_SWITCHDEV ARM: dts: am335x-sancloud-bbe: fix phy mode bus: ti-sysc: Fix missing force mstandby quirk handling reset: Do not register resource data for missing resets reset: Fix {of,devm}_reset_control_array_get kerneldoc return types reset: brcmstb: Remove resource checks dt-bindings: reset: Fix brcmstb-reset example ...
2019-12-17ARM: OMAP2+: Fix ti_sysc_find_one_clockdomain to check for to_clk_hw_omapTony Lindgren1-1/+5
We must bail out early if the clock is not hw_omap. Otherwise we will try to access invalid address with hwclk->clkdm_name: Unable to handle kernel paging request at virtual address ffffffff Internal error: Oops: 27 [#1] ARM ... (strcmp) from [<c011b348>] (clkdm_lookup+0x40/0x60) [<c011b348>] (clkdm_lookup) from [<c011cb84>] (ti_sysc_clkdm_init+0x5c/0x64) [<c011cb84>] (ti_sysc_clkdm_init) from [<c03680a8>] (sysc_probe+0x948/0x117c) [<c03680a8>] (sysc_probe) from [<c03d0af4>] (platform_drv_probe+0x48/0x98) ... Fixes: 2b2f7def058a ("bus: ti-sysc: Add support for missing clockdomain handling") Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-16Merge tag 'arm-soc/for-5.5/soc-fixes' of ↵Olof Johansson1-0/+1
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs machine fixes for 5.5-rc1, please pull the following: - H. Nikolaus adds a missing sentinel entry to the BCM2711 machine descriptor compatible array which would make multiplatform kernels fail to boot * tag 'arm-soc/for-5.5/soc-fixes' of https://github.com/Broadcom/stblinux: ARM: bcm: Add missing sentinel to bcm2711_compat[] Link: https://lore.kernel.org/r/20191216035701.15534-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-16Merge tag 'samsung-fixes-5.5' of ↵Olof Johansson1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes Samsung fixes for v5.5 1. Restore debugfs support in exynos_defconfig (as now it is not selected as dependency of tracing). Debugfs is required by systemd and several tests. 2. Maintainers updates. * tag 'samsung-fixes-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos_defconfig: Restore debugfs support MAINTAINERS: Include Samsung SoC serial driver in Samsung SoC entry MAINTAINERS: Update Lukasz Luba's email address Link: https://lore.kernel.org/r/20191215121316.32091-1-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-16Merge tag 'renesas-fixes-for-v5.5-tag1' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v5.5 - Restore debugfs support * tag 'renesas-fixes-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: defconfig: Restore debugfs support Link: https://lore.kernel.org/r/20191213213719.18122-1-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-16ARM: bcm: Add missing sentinel to bcm2711_compat[]H. Nikolaus Schaller1-0/+1
commit 781fa0a95424 ("ARM: bcm: Add support for BCM2711 SoC") breaks boot of many other platforms (e.g. OMAP or i.MX6) if CONFIG_ARCH_BCM2835 is enabled in addition to some multiplatform config (e.g. omap2plus_defconfig). The symptom is that the OMAP based board does not show any activity beyond "Starting Kernel ..." even with earlycon. Reverting the mentioned commit makes it work again. The real fix is to add the missing NULL sentinel to the bcm2711_compat[] variable-length array. Fixes: 781fa0a95424 ("ARM: bcm: Add support for BCM2711 SoC") Acked-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-12-14Merge branch 'linus' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "Fix another build problem for Wireguard without Crypto" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arm/curve25519 - add arch-specific key generation function
2019-12-13Merge tag 'omap-for-v5.5/fixes-rc1-signed' of ↵Olof Johansson4-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omap variants for v5.5-rc1 cycle This series of changes contains fixes for issues recently noticed: - The ti-sysc interconnect target module driver needs fixes for mstandby quirk handling and reset delay - We need to configure am335x-sancloud-bbe to use rgmii-id mode because of the phy changes done earlier - NET_SWITCHDEV is no longer selected in Kconfig but a dependency and we must enable CONFIG_NET_SWITCHDEV to have TI_CPSW_SWITCHDEV - We are still relying on DEBUG_FS at least for PM configuration, let's add it back - We need to update compatible for am437x-gp/epos-evm because of the recent changes to use generic panels * tag 'omap-for-v5.5/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix missing reset delay handling ARM: dts: am437x-gp/epos-evm: fix panel compatible ARM: omap2plus_defconfig: Add back DEBUG_FS ARM: omap2plus_defconfig: enable NET_SWITCHDEV ARM: dts: am335x-sancloud-bbe: fix phy mode bus: ti-sysc: Fix missing force mstandby quirk handling Link: https://lore.kernel.org/r/pull-1576254925-709310@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-13ARM: shmobile: defconfig: Restore debugfs supportGeert Uytterhoeven1-0/+1
Since commit 0e4a459f56c32d3e ("tracing: Remove unnecessary DEBUG_FS dependency"), CONFIG_DEBUG_FS is no longer auto-enabled. This breaks booting Debian 9, as systemd needs debugfs: [FAILED] Failed to mount /sys/kernel/debug. See 'systemctl status sys-kernel-debug.mount' for details. [DEPEND] Dependency failed for Local File Systems. ... You are in emergGive root password for maintenance (or press Control-D to continue): Fix this by enabling CONFIG_DEBUG_FS explicitly. See also commit 18977008f44c66bd ("ARM: multi_v7_defconfig: Restore debugfs support"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20191209101327.26571-1-geert+renesas@glider.be
2019-12-12Merge tag 'imx-fixes-5.5' of ↵Olof Johansson4-15/+27
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.5: - Add missing jedec,spi-nor compatible for imx6ul-14x14-evk board, so that SPI NOR device can be probed. - Fix power button of E60K02 board by removing LDORTC2 regulator. - A couple of fixes on serial number support of i.MX6ULL/ULZ SoCs to remove the boot regression caused by 8267ff89b713 ("ARM: imx: Add serial number support for i.MX6/7 SoCs"). - A couple of fixes on LS1028A SoC TMU regarding to calibration data and reboot register configuration. - Fix a regression seen on imx6ul-evk board by marking always-on for the regulator that is shared by many peripherals. - Explicitly restore CONFIG_DEBUG_FS in imx_v6_v7_defconfig. * tag 'imx-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: Fix boot crash if ocotp is not found ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS ARM: dts: imx6ul-evk: Fix peripheral regulator arm64: dts: ls1028a: fix reboot node arm64: dts: ls1028a: fix typo in TMU calibration data ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs ARM: dts: e60k02: fix power button ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing Link: https://lore.kernel.org/r/20191212122427.GK15858@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-12crypto: arm/curve25519 - add arch-specific key generation functionJason A. Donenfeld1-0/+7
Somehow this was forgotten when Zinc was being split into oddly shaped pieces, resulting in linker errors. The x86_64 glue has a specific key generation implementation, but the Arm one does not. However, it can still receive the NEON speedups by calling the ordinary DH function using the base point. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-12ARM: imx: Fix boot crash if ocotp is not foundLeonard Crestez1-1/+3
The imx_soc_device_init functions tries to fetch the ocotp regmap in order to soc serial number. If regmap fetch fails then a message is printed but regmap_read is called anyway and the system crashes. Failing to lookup ocotp regmap shouldn't be a fatal boot error so check that the pointer is valid. Only side-effect of ocotp lookup failure now is that serial number will be reported as all-zeros which is acceptable. Cc: stable@vger.kernel.org Fixes: 8267ff89b713 ("ARM: imx: Add serial number support for i.MX6/7 SoCs") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-12ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FSLeonard Crestez1-0/+1
This is currently off and that's not desirable: default imx config is meant to be generally useful for development and debugging. Running git bisect between v5.4 and v5.5-rc1 finds this started from commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") Explicit CONFIG_DEBUG_FS=y was earlier removed by commit c29d541f590c ("ARM: imx_v6_v7_defconfig: Remove unneeded options") A very similar fix was required before: commit 7e9eb6268809 ("ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-12ARM: dts: imx6ul-evk: Fix peripheral regulatorLeonard Crestez1-6/+20
Many peripherals are affected by gpio5/2, not just sensors. One of those is ethernet phy so network boot is current broken. Fix by renaming reg_sensors and marking it as "always on". Also add a comment asking for careful testing if this is to be made dynamic in the future. The "peri_3v3" naming is similar to imx6sx-sdb and regulator-name is same string as in schematics (VPERI_3V3). Fixes: 09e2b1048954 ("ARM: dts: imx6ul-14x14-evk: Add sensors' GPIO regulator") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11Merge tag 'arm-soc/for-5.5/devicetree-fixes' of ↵Olof Johansson4-6/+6
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for v5.5-rc1, please pull the following: - Nicolas fixes the SoC's dma-range property to cover the full 1GB aperture - Stefan fixes the critical temperature trip point to be set before the firmware performs thermal throttling - Florian fixes the BCM5301X and Cygnus MDIO nodes to have corrected #address-cells and #size-cells properties * tag 'arm-soc/for-5.5/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Fix critical trip point ARM: dts: Cygnus: Fix MDIO node address/size cells ARM: dts: bcm2711: fix soc's node dma-ranges ARM: dts: BCM5301X: Fix MDIO node address/size cells Link: https://lore.kernel.org/r/20191210205850.12442-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-11ARM: mmp: include the correct cputype.hArnd Bergmann1-1/+1
The file was moved, causing a build error: In file included from /git/arm-soc/arch/arm/mach-mmp/pxa168.c:28: arch/arm/mach-mmp/pxa168.h:22:10: fatal error: cputype.h: No such file or directory Include it from the new location. Link: https://lore.kernel.org/r/20191210203409.2875880-1-arnd@arndb.de Fixes: 32adcaa010fa ("ARM: mmp: move cputype.h to include/linux/soc/") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-11ARM: dts: am437x-gp/epos-evm: fix panel compatibleTomi Valkeinen2-2/+2
The LCD panel on AM4 GP EVMs and ePOS boards seems to be osd070t1718-19ts. The current dts files say osd057T0559-34ts. Possibly the panel has changed since the early EVMs, or there has been a mistake with the panel type. Update the DT files accordingly. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-11ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCsChristoph Niedermaier1-2/+2
After the commit 8267ff89b713 ("ARM: imx: Add serial number support for i.MX6/7 SoCs") the kernel doesn't start on i.MX6ULL/ULZ SoC. Tested on next-20191205. For i.MX6ULL/ULZ the variable "ocotp_compat" is set to "fsl,imx6ul-ocotp", but with commit ffbc34bf0e9c ("nvmem: imx-ocotp: Implement i.MX6ULL/ULZ support") and commit f243bc821ee3 ("ARM: dts: imx6ull: Fix i.MX6ULL/ULZ ocotp compatible") the value "fsl,imx6ull-ocotp" is already defined and set in device tree... By setting "ocotp_compat" to "fsl,imx6ull-ocotp" the kernel does boot. Fixes: 8267ff89b713 ("ARM: imx: Add serial number support for i.MX6/7 SoCs") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-10ARM: dts: bcm283x: Fix critical trip pointStefan Wahren1-1/+1
During definition of the CPU thermal zone of BCM283x SoC family there was a misunderstanding of the meaning "criticial trip point" and the thermal throttling range of the VideoCore firmware. The latter one takes effect when the core temperature is at least 85 degree celsius or higher So the current critical trip point doesn't make sense, because the thermal shutdown appears before the firmware has a chance to throttle the ARM core(s). Fix these unwanted shutdowns by increasing the critical trip point to a value which shouldn't be reached with working thermal throttling. Fixes: 0fe4d2181cc4 ("ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-12-10ARM: omap2plus_defconfig: Add back DEBUG_FSTony Lindgren1-0/+1
Commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removed select for DEBUG_FS but we still need it at least for enabling deeper idle states for the SoCs. Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-24 01:26:21 +0300