summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2021-05-22ARM: 9056/1: decompressor: fix BSS size calculation for LLVM ld.lldArd Biesheuvel1-2/+2
commit c4e792d1acce31c2eb7b9193ab06ab94de05bf42 upstream. The LLVM ld.lld linker uses a different symbol type for __bss_start, resulting in the calculation of KBSS_SZ to be thrown off. Up until now, this has gone unnoticed as it only affects the appended DTB case, but pending changes for ARM in the way the decompressed kernel is cleaned from the caches has uncovered this problem. On a ld.lld build: $ nm vmlinux |grep bss_ c1c22034 D __bss_start c1c86e98 B __bss_stop resulting in $ readelf -s arch/arm/boot/compressed/vmlinux | grep bss_size 433: c1c86e98 0 NOTYPE GLOBAL DEFAULT ABS _kernel_bss_size which is obviously incorrect, and may cause the cache clean to access unmapped memory, or cause the size calculation to wrap, resulting in no cache clean to be performed at all. Fix this by updating the sed regex to take D type symbols into account. Link: https://lore.kernel.org/linux-arm-kernel/6c65bcef-d4e7-25fa-43cf-2c435bb61bb9@collabora.com/ Link: https://lore.kernel.org/linux-arm-kernel/20210205085220.31232-1-ardb@kernel.org/ Cc: <stable@vger.kernel.org> # v4.19+ Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com> Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-28ARM: dts: Fix swapped mmc order for omap3Tony Lindgren1-0/+3
[ Upstream commit a1ebdb3741993f853865d1bd8f77881916ad53a7 ] Also some omap3 devices like n900 seem to have eMMC and micro-sd swapped around with commit 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4"). Let's fix the issue with aliases as discussed on the mailing lists. While the mmc aliases should be board specific, let's first fix the issue with minimal changes. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-28ARM: 9071/1: uprobes: Don't hook on thumb instructionsFredrik Strupe1-2/+2
commit d2f7eca60b29006285d57c7035539e33300e89e5 upstream. Since uprobes is not supported for thumb, check that the thumb bit is not set when matching the uprobes instruction hooks. The Arm UDF instructions used for uprobes triggering (UPROBE_SWBP_ARM_INSN and UPROBE_SS_ARM_INSN) coincidentally share the same encoding as a pair of unallocated 32-bit thumb instructions (not UDF) when the condition code is 0b1111 (0xf). This in effect makes it possible to trigger the uprobes functionality from thumb, and at that using two unallocated instructions which are not permanently undefined. Signed-off-by: Fredrik Strupe <fredrik@strupe.net> Cc: stable@vger.kernel.org Fixes: c7edc9e326d5 ("ARM: add uprobes support") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-28ARM: footbridge: fix PCI interrupt mappingRussell King4-8/+7
[ Upstream commit 30e3b4f256b4e366a61658c294f6a21b8626dda7 ] Since commit 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()"), the PCI code will call the IRQ mapping function whenever a PCI driver is probed. If these are marked as __init, this causes an oops if a PCI driver is loaded or bound after the kernel has initialised. Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-28ARM: keystone: fix integer overflow warningArnd Bergmann1-2/+2
[ Upstream commit 844b85dda2f569943e1e018fdd63b6f7d1d6f08e ] clang warns about an impossible condition when building with 32-bit phys_addr_t: arch/arm/mach-keystone/keystone.c:79:16: error: result of comparison of constant 51539607551 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare] mem_end > KEYSTONE_HIGH_PHYS_END) { ~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-keystone/keystone.c:78:16: error: result of comparison of constant 34359738368 with expression of type 'phys_addr_t' (aka 'unsigned int') is always true [-Werror,-Wtautological-constant-out-of-range-compare] if (mem_start < KEYSTONE_HIGH_PHYS_START || ~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~ Change the temporary variable to a fixed-size u64 to avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Link: https://lore.kernel.org/r/20210323131814.2751750-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-28ARM: dts: Fix moving mmc devices with aliases for omap4 & 5Tony Lindgren2-0/+10
[ Upstream commit 77335a040178a0456d4eabc8bf17a7ca3ee4a327 ] Fix moving mmc devices with dts aliases as discussed on the lists. Without this we now have internal eMMC mmc1 show up as mmc2 compared to the earlier order of devices. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-28ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable raceTony Lindgren1-8/+0
[ Upstream commit 140a776833957539c84301dbdb4c3013876de118 ] We have a duplicate legacy clock defined for sha2md5_fck that can sometimes race with clk_disable() with the dts configured clock for OMAP4_SHA2MD5_CLKCTRL when unused clocks are disabled during boot causing an "Unhandled fault: imprecise external abort". Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfacesStefan Riedmueller1-0/+2
[ Upstream commit f57011e72f5fe0421ec7a812beb1b57bdf4bb47f ] Setting the vmmc supplies is crucial since otherwise the supplying regulators get disabled and the SD interfaces are no longer powered which leads to system failures if the system is booted from that SD interface. Fixes: 1e44d3f880d5 ("ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module") Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pinMarek Behún1-0/+1
commit a26c56ae67fa9fbb45a8a232dcd7ebaa7af16086 upstream. Use the `marvell,reg-init` DT property to configure the LED[2]/INTn pin of the Marvell 88E1514 ethernet PHY on Turris Omnia into interrupt mode. Without this the pin is by default in LED[2] mode, and the Marvell PHY driver configures LED[2] into "On - Link, Blink - Activity" mode. This fixes the issue where the pca9538 GPIO/interrupt controller (which can't mask interrupts in HW) received too many interrupts and after a time started ignoring the interrupt with error message: IRQ 71: nobody cared There is a work in progress to have the Marvell PHY driver support parsing PHY LED nodes from OF and registering the LEDs as Linux LED class devices. Once this is done the PHY driver can also automatically set the pin into INTn mode if it does not find LED[2] in OF. Until then, though, we fix this via `marvell,reg-init` DT property. Signed-off-by: Marek Behún <kabel@kernel.org> Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: <stable@vger.kernel.org> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-10ARM: dts: am33xx: add aliases for mmc interfacesMans Rullgard1-0/+3
[ Upstream commit 9bbce32a20d6a72c767a7f85fd6127babd1410ac ] Without DT aliases, the numbering of mmc interfaces is unpredictable. Adding them makes it possible to refer to devices consistently. The popular suggestion to use UUIDs obviously doesn't work with a blank device fresh from the factory. See commit fa2d0aa96941 ("mmc: core: Allow setting slot index via device tree alias") for more discussion. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30ARM: dts: at91-sama5d27_som1: fix phy address to 7Claudiu Beznea1-2/+2
commit 221c3a09ddf70a0a51715e6c2878d8305e95c558 upstream. Fix the phy address to 7 for Ethernet PHY on SAMA5D27 SOM1. No connection established if phy address 0 is used. The board uses the 24 pins version of the KSZ8081RNA part, KSZ8081RNA pin 16 REFCLK as PHYAD bit [2] has weak internal pull-down. But at reset, connected to PD09 of the MPU it's connected with an internal pull-up forming PHYAD[2:0] = 7. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Fixes: 2f61929eb10a ("ARM: dts: at91: at91-sama5d27_som1: fix PHY ID") Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: <stable@vger.kernel.org> # 4.14+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07Xen/gnttab: handle p2m update errors on a per-slot basisJan Beulich1-4/+31
commit 8310b77b48c5558c140e7a57a702e7819e62f04e upstream. Bailing immediately from set_foreign_p2m_mapping() upon a p2m updating error leaves the full batch in an ambiguous state as far as the caller is concerned. Instead flags respective slots as bad, unmapping what was mapped there right away. HYPERVISOR_grant_table_op()'s return value and the individual unmap slots' status fields get used only for a one-time - there's not much we can do in case of a failure. Note that there's no GNTST_enomem or alike, so GNTST_general_error gets used. The map ops' handle fields get overwritten just to be on the safe side. This is part of XSA-367. Cc: <stable@vger.kernel.org> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/96cccf5d-e756-5f53-b91a-ea269bfb9be0@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04ARM: dts: aspeed: Add LCLK to lpc-snoopJohn Wang2-0/+2
commit d050d049f8b8077025292c1ecf456c4ee7f96861 upstream. Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201202051634.490-2-wangzhiqiang.bj@bytedance.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ coresVladimir Murzin1-2/+2
[ Upstream commit 2acb909750431030b65a0a2a17fd8afcbd813a84 ] It was observed that decompressor running on hardware implementing ARM v8.2 Load/Store Multiple Atomicity and Ordering Control (LSMAOC), say, as guest, would stuck just after: Uncompressing Linux... done, booting the kernel. The reason is that it clears nTLSMD bit when disabling caches: nTLSMD, bit [3] When ARMv8.2-LSMAOC is implemented: No Trap Load Multiple and Store Multiple to Device-nGRE/Device-nGnRE/Device-nGnRnE memory. 0b0 All memory accesses by A32 and T32 Load Multiple and Store Multiple at EL1 or EL0 that are marked at stage 1 as Device-nGRE/Device-nGnRE/Device-nGnRnE memory are trapped and generate a stage 1 Alignment fault. 0b1 All memory accesses by A32 and T32 Load Multiple and Store Multiple at EL1 or EL0 that are marked at stage 1 as Device-nGRE/Device-nGnRE/Device-nGnRnE memory are not trapped. This bit is permitted to be cached in a TLB. This field resets to 1. Otherwise: Reserved, RES1 So as effect we start getting traps we are not quite ready for. Looking into history it seems that mask used for SCTLR clear came from the similar code for ARMv4, where bit[3] is the enable/disable bit for the write buffer. That not applicable to ARMv7 and onwards, so retire that bit from the masks. Fixes: 7d09e85448dfa78e3e58186c934449aaf6d49b50 ("[ARM] 4393/2: ARMv7: Add uncompressing code for the new CPU Id format") Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04ARM: dts: armada388-helios4: assign pinctrl to each fanRosen Penev1-3/+10
[ Upstream commit 46ecdfc1830eaa40a11d7f832089c82b0e67ea96 ] Split up the pins for each fan. This is needed in order to control them Fixes: ced8025b569e ("ARM: dts: armada388-helios4") Signed-off-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04ARM: dts: armada388-helios4: assign pinctrl to LEDsRosen Penev1-3/+12
[ Upstream commit e011c9025a4691b5c734029577a920bd6c320994 ] Split up the pins to match earlier definitions. Allows LEDs to flash properly. Fixes: ced8025b569e ("ARM: dts: armada388-helios4") Signed-off-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04ARM: dts: Configure missing thermal interrupt for 4430Tony Lindgren1-0/+2
[ Upstream commit 44f416879a442600b006ef7dec3a6dc98bcf59c6 ] We have gpio_86 wired internally to the bandgap thermal shutdown interrupt on 4430 like we have it on 4460 according to the TRM. This can be found easily by searching for TSHUT. For some reason the thermal shutdown interrupt was never added for 4430, let's add it. I believe this is needed for the thermal shutdown interrupt handler ti_bandgap_tshut_irq_handler() to call orderly_poweroff(). Fixes: aa9bb4bb8878 ("arm: dts: add omap4430 thermal data") Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid XU3 familyKrzysztof Kozlowski1-1/+1
[ Upstream commit 3e7d9a583a24f7582c6bc29a0d4d624feedbc2f9 ] The Samsung PMIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. The falling edge interrupt will mostly work but it's not correct. Fixes: aac4e0615341 ("ARM: dts: odroidxu3: Enable wake alarm of S2MPS11 RTC") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20201210212903.216728-6-krzk@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04ARM: dts: exynos: correct PMIC interrupt trigger level on Arndale OctaKrzysztof Kozlowski1-1/+1
[ Upstream commit 1ac8893c4fa3d4a34915dc5cdab568a39db5086c ] The Samsung PMIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. The falling edge interrupt will mostly work but it's not correct. Fixes: 1fed2252713e ("ARM: dts: fix pinctrl for s2mps11-irq on exynos5420-arndale-octa") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20201210212903.216728-5-krzk@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04ARM: dts: exynos: correct PMIC interrupt trigger level on SpringKrzysztof Kozlowski1-1/+1
[ Upstream commit 77e6a5467cb8657cf8b5e610a30a4c502085e4f9 ] The Samsung PMIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. Without specifying the interrupt type in Devicetree, kernel might apply some fixed configuration, not necessarily working for this hardware. Fixes: 53dd4138bb0a ("ARM: dts: Add exynos5250-spring device tree") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210212903.216728-4-krzk@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04ARM: dts: exynos: correct PMIC interrupt trigger level on RinatoKrzysztof Kozlowski1-1/+1
[ Upstream commit 437ae60947716bb479e2f32466f49445c0509b1e ] The Samsung PMIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. Without specifying the interrupt type in Devicetree, kernel might apply some fixed configuration, not necessarily working for this hardware. Fixes: faaf348ef468 ("ARM: dts: Add board dts file for exynos3250-rinato") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20201210212903.216728-3-krzk@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04ARM: dts: exynos: correct PMIC interrupt trigger level on MonkKrzysztof Kozlowski1-1/+1
[ Upstream commit 8528cda2b7c667e9cd173aef1a677c71b7d5a096 ] The Samsung PMIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. Without specifying the interrupt type in Devicetree, kernel might apply some fixed configuration, not necessarily working for this hardware. Fixes: e0cefb3f79d3 ("ARM: dts: add board dts file for Exynos3250-based Monk board") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210212903.216728-2-krzk@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04ARM: dts: exynos: correct PMIC interrupt trigger level on Artik 5Krzysztof Kozlowski1-1/+1
[ Upstream commit cb31334687db31c691901269d65074a7ffaecb18 ] The Samsung PMIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. Without specifying the interrupt type in Devicetree, kernel might apply some fixed configuration, not necessarily working for this hardware. Fixes: b004a34bd0ff ("ARM: dts: exynos: Add exynos3250-artik5 dtsi file for ARTIK5 module") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20201210212903.216728-1-krzk@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-23xen/arm: don't ignore return errors from set_phys_to_machineStefano Stabellini1-2/+4
commit 36bf1dfb8b266e089afa9b7b984217f17027bf35 upstream. set_phys_to_machine can fail due to lack of memory, see the kzalloc call in arch/arm/xen/p2m.c:__set_phys_to_machine_multi. Don't ignore the potential return error in set_foreign_p2m_mapping, returning it to the caller instead. This is part of XSA-361. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Cc: stable@vger.kernel.org Reviewed-by: Julien Grall <jgrall@amazon.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-23ARM: kexec: fix oops after TLB are invalidatedRussell King4-39/+36
[ Upstream commit 4d62e81b60d4025e2dfcd5ea531cc1394ce9226f ] Giancarlo Ferrari reports the following oops while trying to use kexec: Unable to handle kernel paging request at virtual address 80112f38 pgd = fd7ef03e [80112f38] *pgd=0001141e(bad) Internal error: Oops: 80d [#1] PREEMPT SMP ARM ... This is caused by machine_kexec() trying to set the kernel text to be read/write, so it can poke values into the relocation code before copying it - and an interrupt occuring which changes the page tables. The subsequent writes then hit read-only sections that trigger a data abort resulting in the above oops. Fix this by copying the relocation code, and then writing the variables into the destination, thereby avoiding the need to make the kernel text read/write. Reported-by: Giancarlo Ferrari <giancarlo.ferrari89@gmail.com> Tested-by: Giancarlo Ferrari <giancarlo.ferrari89@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-23ARM: ensure the signal page contains defined contentsRussell King1-6/+8
[ Upstream commit 9c698bff66ab4914bb3d71da7dc6112519bde23e ] Ensure that the signal page contains our poison instruction to increase the protection against ROP attacks and also contains well defined contents. Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-23ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLLAlexandre Belloni1-3/+0
[ Upstream commit 5638159f6d93b99ec9743ac7f65563fca3cf413d ] This reverts commit c17e9377aa81664d94b4f2102559fcf2a01ec8e7. The lpc32xx clock driver is not able to actually change the PLL rate as this would require reparenting ARM_CLK, DDRAM_CLK, PERIPH_CLK to SYSCLK, then stop the PLL, update the register, restart the PLL and wait for the PLL to lock and finally reparent ARM_CLK, DDRAM_CLK, PERIPH_CLK to HCLK PLL. Currently, the HCLK driver simply updates the registers but this has no real effect and all the clock rate calculation end up being wrong. This is especially annoying for the peripheral (e.g. UARTs, I2C, SPI). Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20210203090320.GA3760268@piout.net' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-23arm/xen: Don't probe xenbus as part of an early initcallJulien Grall1-2/+0
commit c4295ab0b485b8bc50d2264bcae2acd06f25caaf upstream. After Commit 3499ba8198cad ("xen: Fix event channel callback via INTX/GSI"), xenbus_probe() will be called too early on Arm. This will recent to a guest hang during boot. If the hang wasn't there, we would have ended up to call xenbus_probe() twice (the second time is in xenbus_probe_initcall()). We don't need to initialize xenbus_probe() early for Arm guest. Therefore, the call in xen_guest_init() is now removed. After this change, there is no more external caller for xenbus_probe(). So the function is turned to a static one. Interestingly there were two prototypes for it. Cc: stable@vger.kernel.org Fixes: 3499ba8198cad ("xen: Fix event channel callback via INTX/GSI") Reported-by: Ian Jackson <iwj@xenproject.org> Signed-off-by: Julien Grall <jgrall@amazon.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20210210170654.5377-1-julien@xen.org Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10ARM: footbridge: fix dc21285 PCI configuration accessorsRussell King1-6/+6
commit 39d3454c3513840eb123b3913fda6903e45ce671 upstream. Building with gcc 4.9.2 reveals a latent bug in the PCI accessors for Footbridge platforms, which causes a fatal alignment fault while accessing IO memory. Fix this by making the assembly volatile. Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-04ARM: imx: build suspend-imx6.S with arm instruction setMax Krummenacher1-0/+1
commit a88afa46b86ff461c89cc33fc3a45267fff053e8 upstream. When the kernel is configured to use the Thumb-2 instruction set "suspend-to-memory" fails to resume. Observed on a Colibri iMX6ULL (i.MX 6ULL) and Apalis iMX6 (i.MX 6Q). It looks like the CPU resumes unconditionally in ARM instruction mode and then chokes on the presented Thumb-2 code it should execute. Fix this by using the arm instruction set for all code in suspend-imx6.S. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Fixes: df595746fa69 ("ARM: imx: add suspend in ocram support for i.mx6q") Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-04ARM: dts: imx6qdl-gw52xx: fix duplicate regulator namingKoen Vandeputte1-1/+1
commit 5a22747b76ca2384057d8e783265404439d31d7f upstream. 2 regulator descriptions carry identical naming. This leads to following boot warning: [ 0.173138] debugfs: Directory 'vdd1p8' with parent 'regulator' already present! Fix this by renaming the one used for audio. Fixes: 5051bff33102 ("ARM: dts: imx: ventana: add LTC3676 PMIC support") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Cc: stable@vger.kernel.org # v4.11 Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27xen: Fix event channel callback via INTX/GSIDavid Woodhouse1-1/+1
[ Upstream commit 3499ba8198cad47b731792e5e56b9ec2a78a83a2 ] For a while, event channel notification via the PCI platform device has been broken, because we attempt to communicate with xenstore before we even have notifications working, with the xs_reset_watches() call in xs_init(). We tend to get away with this on Xen versions below 4.0 because we avoid calling xs_reset_watches() anyway, because xenstore might not cope with reading a non-existent key. And newer Xen *does* have the vector callback support, so we rarely fall back to INTX/GSI delivery. To fix it, clean up a bit of the mess of xs_init() and xenbus_probe() startup. Call xs_init() directly from xenbus_init() only in the !XS_HVM case, deferring it to be called from xenbus_probe() in the XS_HVM case instead. Then fix up the invocation of xenbus_probe() to happen either from its device_initcall if the callback is available early enough, or when the callback is finally set up. This means that the hack of calling xenbus_probe() from a workqueue after the first interrupt, or directly from the PCI platform device setup, is no longer needed. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210113132606.422794-2-dwmw2@infradead.org Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-19ARM: picoxcell: fix missing interrupt-parent propertiesArnd Bergmann1-0/+4
[ Upstream commit bac717171971176b78c72d15a8b6961764ab197f ] dtc points out that the interrupts for some devices are not parsable: picoxcell-pc3x2.dtsi:45.19-49.5: Warning (interrupts_property): /paxi/gem@30000: Missing interrupt-parent picoxcell-pc3x2.dtsi:51.21-55.5: Warning (interrupts_property): /paxi/dmac@40000: Missing interrupt-parent picoxcell-pc3x2.dtsi:57.21-61.5: Warning (interrupts_property): /paxi/dmac@50000: Missing interrupt-parent picoxcell-pc3x2.dtsi:233.21-237.5: Warning (interrupts_property): /rwid-axi/axi2pico@c0000000: Missing interrupt-parent There are two VIC instances, so it's not clear which one needs to be used. I found the BSP sources that reference VIC0, so use that: https://github.com/r1mikey/meta-picoxcell/blob/master/recipes-kernel/linux/linux-picochip-3.0/0001-picoxcell-support-for-Picochip-picoXcell-SoC.patch Acked-by: Jamie Iles <jamie@jamieiles.com> Link: https://lore.kernel.org/r/20201230152010.3914962-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17ARM: OMAP2+: omap_device: fix idling of devices during probeAndreas Kemnade1-3/+5
commit ec76c2eea903947202098090bbe07a739b5246e9 upstream. On the GTA04A5 od->_driver_status was not set to BUS_NOTIFY_BIND_DRIVER during probe of the second mmc used for wifi. Therefore omap_device_late_idle idled the device during probing causing oopses when accessing the registers. It was not set because od->_state was set to OMAP_DEVICE_STATE_IDLE in the notifier callback. Therefore set od->_driver_status also in that case. This came apparent after commit 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4") causing this oops: omap_hsmmc 480b4000.mmc: omap_device_late_idle: enabled but no driver. Idling 8<--- cut here --- Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0b402c ... (omap_hsmmc_set_bus_width) from [<c07996bc>] (omap_hsmmc_set_ios+0x11c/0x258) (omap_hsmmc_set_ios) from [<c077b2b0>] (mmc_power_up.part.8+0x3c/0xd0) (mmc_power_up.part.8) from [<c077c14c>] (mmc_start_host+0x88/0x9c) (mmc_start_host) from [<c077d284>] (mmc_add_host+0x58/0x84) (mmc_add_host) from [<c0799190>] (omap_hsmmc_probe+0x5fc/0x8c0) (omap_hsmmc_probe) from [<c0666728>] (platform_drv_probe+0x48/0x98) (platform_drv_probe) from [<c066457c>] (really_probe+0x1dc/0x3b4) Fixes: 04abaf07f6d5 ("ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer") Fixes: 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4") Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> [tony@atomide.com: left out extra parens, trimmed description stack trace] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30ARM: dts: at91: sama5d2: fix CAN message ram offset and sizeNicolas Ferre1-3/+3
commit 85b8350ae99d1300eb6dc072459246c2649a8e50 upstream. CAN0 and CAN1 instances share the same message ram configured at 0x210000 on sama5d2 Linux systems. According to current configuration of CAN0, we need 0x1c00 bytes so that the CAN1 don't overlap its message ram: 64 x RX FIFO0 elements => 64 x 72 bytes 32 x TXE (TX Event FIFO) elements => 32 x 8 bytes 32 x TXB (TX Buffer) elements => 32 x 72 bytes So a total of 7168 bytes (0x1C00). Fix offset to match this needed size. Make the CAN0 message ram ioremap match exactly this size so that is easily understandable. Adapt CAN1 size accordingly. Fixes: bc6d5d7666b7 ("ARM: dts: at91: sama5d2: add m_can nodes") Reported-by: Dan Sneddon <dan.sneddon@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Cristian Birsan <cristian.birsan@microchip.com> Cc: stable@vger.kernel.org # v4.13+ Link: https://lore.kernel.org/r/20201203091949.9015-1-nicolas.ferre@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30ARM: dts: pandaboard: fix pinmux for gpio user button of Pandaboard ESH. Nikolaus Schaller1-1/+1
commit df9dbaf2c415cd94ad520067a1eccfee62f00a33 upstream. The pinmux control register offset passed to OMAP4_IOPAD is odd. Fixes: ab9a13665e7c ("ARM: dts: pandaboard: add gpio user button") Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30ARM: sunxi: Add machine match for the Allwinner V3 SoCPaul Kocialkowski1-0/+1
[ Upstream commit ad2091f893bd5dfe2824f0d6819600d120698e9f ] The Allwinner V3 SoC shares the same base as the V3s but comes with extra pins and features available. As a result, it has its dedicated compatible string (already used in device trees), which is added here. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201031182137.1879521-2-contact@paulk.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: at91: sama5d2: map securam as deviceClaudiu Beznea1-0/+1
[ Upstream commit 9b5dcc8d427e2bcb84c49eb03ffefe11e7537a55 ] Due to strobe signal not being propagated from CPU to securam the securam needs to be mapped as device or strongly ordered memory to work properly. Otherwise, updating to one offset may affect the adjacent locations in securam. Fixes: d4ce5f44d4409 ("ARM: dts: at91: sama5d2: Add securam node") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/1606903025-14197-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: at91: at91sam9rl: fix ADC triggersAlexandre Belloni1-8/+11
[ Upstream commit 851a95da583c26e2ddeb7281e9b61f0d76ea5aba ] The triggers for the ADC were taken from at91sam9260 dtsi but are not correct. Fixes: a4c1d6c75822 ("ARM: at91/dt: sam9rl: add lcd, adc, usb gadget and pwm support") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201128222818.1910764-10-alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: Remove non-existent i2c1 from 98dx3236Chris Packham1-5/+0
[ Upstream commit 7f24479ead579459106bb55c2320a000135731f9 ] The switches with integrated CPUs have only got a single i2c controller. They incorrectly gained one when they were split from the Armada-XP. Fixes: 43e28ba87708 ("ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: at91: sama5d3_xplained: add pincontrol for USB HostCristian Birsan1-0/+7
[ Upstream commit e1062fa7292f1e3744db0a487c4ac0109e09b03d ] The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without it the driver probes but VBus is not powered because of wrong pincontrol configuration. Fixes: b7c2b61570798 ("ARM: at91: add Atmel's SAMA5D3 Xplained board") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20201118120019.1257580-4-cristian.birsan@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: at91: sama5d4_xplained: add pincontrol for USB HostCristian Birsan1-0/+7
[ Upstream commit be4dd2d448816a27c1446f8f37fce375daf64148 ] The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without it the driver probes but VBus is not powered because of wrong pincontrol configuration. Fixes: 38153a017896f ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20201118120019.1257580-3-cristian.birsan@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: p2v: fix handling of LPAE translation in BE modeArd Biesheuvel1-5/+1
[ Upstream commit 4e79f0211b473f8e1eab8211a9fd50cc41a3a061 ] When running in BE mode on LPAE hardware with a PA-to-VA translation that exceeds 4 GB, we patch bits 39:32 of the offset into the wrong byte of the opcode. So fix that, by rotating the offset in r0 to the right by 8 bits, which will put the 8-bit immediate in bits 31:24. Note that this will also move bit #22 in its correct place when applying the rotation to the constant #0x400000. Fixes: d9a790df8e984 ("ARM: 7883/1: fix mov to mvn conversion in case of 64 bit phys_addr_t and BE") Acked-by: Nicolas Pitre <nico@fluxnic.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: aspeed: s2600wf: Fix VGA memory region locationJoel Stanley1-2/+2
[ Upstream commit 9e1cc9679776f5b9e42481d392b1550753ebd084 ] The VGA memory region is always from the top of RAM. On this board, that is 0x80000000 + 0x20000000 - 0x01000000 = 0x9f000000. This was not an issue in practice as the region is "reserved" by the vendor's u-boot reducing the amount of available RAM, and the only user is the host VGA device poking at RAM over PCIe. That is, nothing from the ARM touches it. It is worth fixing as developers copy existing device trees when building their machines, and the XDMA driver does use the memory region from the ARM side. Fixes: c4043ecac34a ("ARM: dts: aspeed: Add S2600WF BMC Machine") Reported-by: John Wang <wangzhiqiang.bj@bytedance.com> Link: https://lore.kernel.org/r/20200922064234.163799-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30soc: renesas: rmobile-sysc: Fix some leaks in rmobile_init_pm_domains()Dan Carpenter1-0/+1
[ Upstream commit cf25d802e029c31efac8bdc979236927f37183bd ] This code needs to call iounmap() on one error path. Fixes: 2173fc7cb681 ("ARM: shmobile: R-Mobile: Add DT support for PM domains") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200923113142.GC1473821@mwanda Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: exynos: fix USB 3.0 pins supply being turned off on Odroid XUKrzysztof Kozlowski1-0/+2
commit bd7e7ff56feea7810df900fb09c9741d259861d9 upstream. On Odroid XU LDO12 and LDO15 supplies the power to USB 3.0 blocks but the GPK GPIO pins are supplied by LDO7 (VDDQ_LCD). LDO7 also supplies GPJ GPIO pins. The Exynos pinctrl driver does not take any supplies, so to have entire GPIO block always available, make the regulator always on. Fixes: 88644b4c750b ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201015182044.480562-3-krzk@kernel.org Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30ARM: dts: exynos: fix USB 3.0 VBUS control and over-current pins on Exynos5410Krzysztof Kozlowski2-0/+32
commit 3d992fd8f4e0f09c980726308d2f2725587b32d6 upstream. The VBUS control (PWREN) and over-current pins of USB 3.0 DWC3 controllers are on Exynos5410 regular GPIOs. This is different than for example on Exynos5422 where these are special ETC pins with proper reset values (pulls, functions). Therefore these pins should be configured to enable proper USB 3.0 peripheral and host modes. This also fixes over-current warning: [ 6.024658] usb usb4-port1: over-current condition [ 6.028271] usb usb3-port1: over-current condition Fixes: cb0896562228 ("ARM: dts: exynos: Add USB to Exynos5410") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201015182044.480562-2-krzk@kernel.org Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30ARM: dts: exynos: fix roles of USB 3.0 ports on Odroid XUKrzysztof Kozlowski1-2/+2
commit ecc1ff532b499d20304a4f682247137025814c34 upstream. On Odroid XU board the USB3-0 port is a microUSB and USB3-1 port is USB type A (host). The roles were copied from Odroid XU3 (Exynos5422) design which has it reversed. Fixes: 8149afe4dbf9 ("ARM: dts: exynos: Add initial support for Odroid XU board") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201015182044.480562-1-krzk@kernel.org Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30ARM: dts: sun8i: v3s: fix GIC node memory rangeIcenowy Zheng1-1/+1
[ Upstream commit a98fd117a2553ab1a6d2fe3c7acae88c1eca4372 ] Currently the GIC node in V3s DTSI follows some old DT examples, and being broken. This leads a warning at boot. Fix this. Fixes: f989086ccbc6 ("ARM: dts: sunxi: add dtsi file for V3s SoC") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201120050851.4123759-1-icenowy@aosc.io Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-02ARM: dts: dra76x: m_can: fix order of clocksMarc Kleine-Budde1-2/+2
[ Upstream commit 05d5de6ba7dbe490dd413b5ca11d0875bd2bc006 ] According to the bosch,m_can.yaml bindings the first clock shall be the "hclk", while the second clock "cclk". This patch fixes the order accordingly. Fixes: 0adbe832f21a ("ARM: dts: dra76x: Add MCAN node") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>