summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2012-02-02ARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframeWill Deacon1-3/+2
Following execution of a signal handler, we currently restore the VFP context from the ucontext in the signal frame. This involves copying from the user stack into the current thread's vfp_hard_struct and then flushing the new data out to the hardware registers. This is problematic when using a preemptible kernel because we could be context switched whilst updating the vfp_hard_struct. If the current thread has made use of VFP since the last context switch, the VFP notifier will copy from the hardware registers into the vfp_hard_struct, overwriting any data that had been partially copied by the signal code. Disabling preemption across copy_from_user calls is a terrible idea, so instead we move the VFP thread flush *before* we update the vfp_hard_struct. Since the flushing is performed lazily, this has the effect of disabling VFP and clearing the CPU's VFP state pointer, therefore preventing the thread from being updated with stale data on the next context switch. Cc: stable <stable@vger.kernel.org> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02Revert "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping"Russell King1-2/+1
This reverts commit 3c424f359898aff48c3d5bed608ac706f8a528c3. Joachim Eastwood reports: | "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping" | Commit: 3c424f359898aff48c3d5bed608ac706f8a528c3 in Linus master | | Breaks booting on my custom AT91RM9200 board. | There isn't any error messages or anything that indicates what goes | wrong it just stops after; Uncompressing Linux... done, booting the | kernel. | | Reverting it makes my board boot again. and further debugging reveals: ioremap: pfn=fffff phys=fffff000 offset=400 size=1000 ioremap: area c3ffdfc0: phys_addr=200000 pfn=200 size=4000 ioremap: found: addr fef74000 => fed73000 => fed73400 Clearly, an area for pfn 0x200, 16K can't ever satisfy a request for pfn 0xfffff. This happens because the changed if statement becomes: if (0x00200 > 0xfffff || 0xfffff000 + 0x400 + 0x1000-1 > 0x00200000 + 0x4000-1) and therefore: if (0x00200 > 0xfffff || 0x000003ff > 0x00203fff) The if condition fails, and so we _believe_ that the SRAM mapping fits our request. Clearly that's totally bogus. Moreover, the original premise of the 'fix' patch was wrong: | The condition checking boundaries of the requested and existing | mappings didn't take in-page offset into consideration though, | which lead to obscure and hard to debug problems when requested | mapping crossed end of the static one. as the code immediately above this loop does: size = PAGE_ALIGN(offset + size); so 'size' already contains the requested offset into the page. So, revert the broken 'fix'. Acked-by: Nicolas Pitre <nico@linaro.org>
2012-01-28ARM: 7304/1: ioremap: fix boundary check when reusing static mappingPawel Moll1-1/+2
Since commit 576d2f2525612ecb5af029a76f21f22a3b82563d "ARM: add generic ioremap optimization by reusing static mappings" ioremap() is trying to reuse existing static mapping when possible. The condition checking boundaries of the requested and existing mappings didn't take in-page offset into consideration though, which lead to obscure and hard to debug problems when requested mapping crossed end of the static one. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-27Merge branch 'sa11x0-mcp-fixes' into fixesRussell King8-86/+3
2012-01-25ARM: 7301/1: Rename the T() macro to TUSER() to avoid namespace conflictsCatalin Marinas7-79/+79
This macro is used to generate unprivileged accesses (LDRT/STRT) to user space. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-25ARM: 7299/1: ftrace: clear zero bit in reported IPs for Thumb-2Rabin Vincent1-6/+9
The dynamic ftrace ops startup test currently fails on Thumb-2 kernels: Testing tracer function: PASSED Testing dynamic ftrace: PASSED Testing dynamic ftrace ops #1: (0 0 0 0 0) FAILED! This is because while the addresses in the mcount records do not have the zero bit set, the IP reported by the mcount call does have it set (because it is copied from the LR). This mismatch causes the ops filtering in ftrace_ops_list_func() to not call the relevant tracers. Fix this by clearing the zero bit before adjusting the LR for the mcount instruction size. Also, combine the mov+sub into a single sub instruction. Acked-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-25ARM: 7298/1: realview: fix mapping of MPCore private memory regionMarc Zyngier4-25/+19
Since commit 0536bdf33faf (ARM: move iotable mappings within the vmalloc region), the RealView PB11MP cannot boot anymore. This is caused by the way the mappings are described on this platform (define replaced by hex values for clarity): { /* GIC CPU interface mapping */ .virtual = IO_ADDRESS(0x1F000100), .pfn = __phys_to_pfn(0x1F000100), .length = SZ_4K, .type = MT_DEVICE, }, { /* GIC distributor mapping */ .virtual = IO_ADDRESS(0x1F001000), .pfn = __phys_to_pfn(0x1F001000), .length = SZ_4K, .type = MT_DEVICE, } The first mapping ends up reserving two pages, and clashes with the second one, which triggers a BUG_ON in vm_area_add_early(). In order to solve this problem, treat the MPCore private memory region (containing the SCU, the GIC and the TWD) as a single region, as described in the TRM: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0360f/CACGDJJC.html The EB11MP is converted the same way, even if it manages to avoid the problem. Tested on both PB11MP and EB11MP. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-23ARM: 7288/1: mach-sa1100: add missing module_init() callLinus Walleij1-0/+2
The Jornada SSP driver is supposed to be initialized by a module_init() call, but it was missed at some merge point. Since the driver mostly pass calls through it magically works anyway, but needs to be rectified. Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-23ARM: 7297/1: smp_twd: make sure timer is stopped before registering itMarc Zyngier1-0/+2
On secondary CPUs, the Timer Control Register is not reset to a sane value before the timer is registered, and the TRM doesn't seem to indicate any reset value either. In some cases, the kernel will take an interrupt too early, depending on what junk was present in the registers at reset time. The fix is to set the Timer Control Register to 0 before registering the clock_event_device and enabling the interrupt. Problem seen on VE (Cortex A5) and Tegra. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-23ARM: 7296/1: proc-v7.S: remove HARVARD_CACHE preprocessor guardsWill Deacon1-6/+0
On v7, we use the same cache maintenance instructions for data lines as for unified lines. This was not the case for v6, where HARVARD_CACHE was defined to indicate the L1 cache topology. This patch removes the erroneous compile-time check for HARVARD_CACHE in proc-v7.S, ensuring that we perform I-side invalidation at boot. Reported-and-Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: stable <stable@vger.kernel.org> Acked-by: Catalin Marinas <Catalin.Marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-23ARM: 7295/1: cortex-a7: move proc_info out of !CONFIG_ARM_LPAE blockWill Deacon1-10/+10
The merging of commits 1b6ba46b ("ARM: LPAE: MMU setup for the 3-level page table format") and b4244738 ("ARM: 7202/1: Add Cortex-A7 proc info") during the merge window ended up putting the Cortex-A7 proc_info into a code block guarded by !CONFIG_ARM_LPAE. This makes Cortex-A7 platforms unbootable when LPAE is enabled. This patch moves the proc_info structure for Cortex-A7 outside of the guarded block. Cc: Pawel Moll <pawel.moll@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-23ARM: 7293/1: logical_cpu_map: decouple CPU mapping from SMPWill Deacon18-31/+35
It turns out that the logical CPU mapping is useful even when !CONFIG_SMP for manipulation of devices like interrupt and power controllers when running a UP kernel on a CPU other than 0. This can happen when kexecing a UP image from an SMP kernel. In the future, multi-cluster systems running AMP configurations will require something similar for mapping cluster IDs, so it makes sense to decouple this logic in preparation for this support. Acked-by: Yang Bai <hamo.by@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reported-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-23ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUsWill Deacon4-6/+1
To ensure correct alignment of cacheline-aligned data, the maximum cacheline size needs to be known at compile time. Since Cortex-A8 and Cortex-A15 have 64-byte cachelines (and it is likely that there will be future ARMv7 implementations with the same line size) then it makes sense to assume that CPU_V7 implies a 64-byte L1 cacheline size. For CPUs with smaller caches, this will result in some harmless padding but will help with single zImage work and avoid hitting subtle bugs with misaligned data structures. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-23ARM: 7290/1: vmlinux.lds.S: align the exception fixup table to a 4-byte boundaryWill Deacon1-1/+1
The exception fixup table is currently aligned to a 32-byte boundary. Whilst this won't cause any problems, the exception_table_entry structures contain only a pair of unsigned longs, so 4-byte alignment is all that is required. If the table was walked from start to end, cacheline alignment may bring some performance benefits, but since a binary search is used, the access pattern is random and will not benefit from a stricter alignment. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-23ARM: 7289/1: vmlinux.lds.S: do not hardcode cacheline size as 32 bytesWill Deacon1-3/+4
The linker script assumes a cacheline size of 32 bytes when aligning the .data..cacheline_aligned and .data..percpu sections. This patch updates the script to use L1_CACHE_BYTES, which should be set to 64 on platforms that require it. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-20Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp ↵Russell King7-20/+2
bus." This reverts commit 5dd7bf59e0e8563265b3e5b33276099ef628fcc7. Conflicts: scripts/mod/file2alias.c This change is wrong on many levels. First and foremost, it causes a regression. On boot on Assabet, which this patch gives a codec id of 'ucb1x00', it gives: ucb1x00 ID not found: 1005 0x1005 is a valid ID for the UCB1300 device. Secondly, this patch is way over the top in terms of complexity. The only device which has been seen to be connected with this MCP code is the UCB1x00 (UCB1200, UCB1300 etc) devices, and they all use the same driver. Adding a match table, requiring the codec string to match the hardware ID read out of the ID register, etc is completely over the top when we can just read the hardware ID register.
2012-01-20Revert "ARM: sa1100: Refactor mcp-sa11x0 to use platform resources."Russell King7-66/+1
This reverts commit af9081ae64b941d32239b947882cd59ba855c5db. This revert is necessary to revert 5dd7bf59e0e8563265b3e5b33276099ef628fcc7.
2012-01-19ARM: 7277/1: setup.c: Fix build warning by removing unneeded header fileFabio Estevam1-1/+0
Fix the following build warning: CC arch/arm/kernel/setup.o In file included from arch/arm/kernel/setup.c:39: arch/arm/include/asm/elf.h:102:1: warning: "vmcore_elf64_check_arch" redefined In file included from arch/arm/kernel/setup.c:24: include/linux/crash_dump.h:30:1: warning: this is the location of the previous definition Since commit 93a72052 (crash_dump: export is_kdump_kernel to modules, consolidate elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn) the inclusion of <linux/crash_dump.h> is no longer needed. Remove the inclusion of <linux/crash_dump.h> and the build warning is fixed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-19ARM: 7279/1: standardize /proc/iomem "Kernel code" nameKees Cook1-1/+1
All other ports use "Kernel code" to identify the Kernel text segment in /proc/iomem. Change the ARM resources to do the same. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-19ARM: fix rcu stalls on SMP platformsRussell King1-2/+8
We can stall RCU processing on SMP platforms if a CPU sits in its idle loop for a long time. This happens because we don't call irq_enter() and irq_exit() around generic_smp_call_function_interrupt() and friends. Add the necessary calls, and remove the one from within ipi_timer(), so that they're all in a common place. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-19ARM: vexpress: fix two section mismatch warningsRussell King1-2/+2
WARNING: vmlinux.o(.text+0x1bc9c): Section mismatch in reference from the function ct_ca9x4_init_cpu_map() to the function .init.text:scu_get_core_count() The function ct_ca9x4_init_cpu_map() references the function __init scu_get_core_count(). WARNING: vmlinux.o(.text+0x1bce8): Section mismatch in reference from the function ct_ca9x4_init_cpu_map() to the function .init.text:set_smp_cross_call() The function ct_ca9x4_init_cpu_map() references the function __init set_smp_cross_call(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-19ARM: fix a section mismatch warning with our use of memblockRussell King1-1/+1
Commit 716a3dc2008 (ARM: Add arm_memblock_steal() to allocate memory away from the kernel) added a function which calls memblock_alloc(). This causes a section conflict: WARNING: vmlinux.o(.text+0xc614): Section mismatch in reference from the function arm_memblock_steal() to the function .init.text:memblock_alloc() The function arm_memblock_steal() references the function __init memblock_alloc(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-19ARM: sa11x0: fix section mismatch in cpu-sa1100.cRussell King1-1/+1
WARNING: arch/arm/mach-sa1100/built-in.o(.data+0x11b8): Section mismatch in reference from the variable sa1100_driver to the function .init.text:sa1100_cpu_init() The variable sa1100_driver references the function __init sa1100_cpu_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-19ARM: sa11x0: fix collie build errorRussell King1-3/+2
f408c985cefc (GPIO: sa1100: implement proper gpiolib gpio_to_irq conversion) made gpio_to_irq() a function. This breaks collie where it's used to initialize some static data. Fix that by moving the initialization to the init code. arch/arm/mach-sa1100/collie.c:139: error: initializer element is not constant arch/arm/mach-sa1100/collie.c:139: error: (near initialization for 'collie_power_resource[0].start') arch/arm/mach-sa1100/collie.c:140: error: initializer element is not constant arch/arm/mach-sa1100/collie.c:140: error: (near initialization for 'collie_power_resource[0].end') Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-19Revert "RTC: sa1100: support sa1100, pxa and mmp soc families"Russell King2-40/+0
This reverts commit 7cea00657dd4daef66ad95e976d5d67ed94cb97e. The sa1100 cleanups fatally broke the SA1100 RTC driver - the first hint that something is wrong are these compiler warnings: drivers/rtc/rtc-sa1100.c:42:1: warning: "RCNR" redefined In file included from arch/arm/mach-sa1100/include/mach/hardware.h:73, from drivers/rtc/rtc-sa1100.c:35: arch/arm/mach-sa1100/include/mach/SA-1100.h:877:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:43:1: warning: "RTAR" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:876:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:44:1: warning: "RTSR" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:879:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:45:1: warning: "RTTR" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:878:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:47:1: warning: "RTSR_HZE" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:891:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:48:1: warning: "RTSR_ALE" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:890:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:49:1: warning: "RTSR_HZ" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:889:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:50:1: warning: "RTSR_AL" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:888:1: warning: this is the location of the previous definition and the second problem, which is far more severe, are the different register layouts, resulting in the wrong registers being read on SA11x0 platforms. This patch adds: #define RCNR 0x00 /* RTC Count Register */ #define RTAR 0x04 /* RTC Alarm Register */ #define RTSR 0x08 /* RTC Status Register */ #define RTTR 0x0c /* RTC Timer Trim Register */ but the SA11x0 registers are: #define RTAR __REG(0x90010000) /* RTC Alarm Reg. */ #define RCNR __REG(0x90010004) /* RTC CouNt Reg. */ #define RTTR __REG(0x90010008) /* RTC Trim Reg. */ #define RTSR __REG(0x90010010) /* RTC Status Reg. */
2012-01-19Revert "ARM: pxa: add dummy clock for sa1100-rtc"Russell King6-8/+0
This reverts commit 7557c175f60d8d40baf16b22caf79beadef8f081. This revert is necessary to revert the broken "RTC: sa1100: support sa1100, pxa and mmp soc families" change.
2012-01-19Revert "ARM: sa1100: clean up of the clock support"Russell King2-67/+26
This reverts commit edf3ff5bac2582b57de4e7c6569fee5d7c1c0a42. This revert is necessary to revert the broken "RTC: sa1100: support sa1100, pxa and mmp soc families" change.
2012-01-18Merge tag 'arm-soc-fixes' of ↵Linus Torvalds19-40/+30
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc ARM: fixes for ARM platforms Some fallout from the 3.3. merge window as well as a couple bug fixes for older preexisting bugs that seem valid to include at this time: * sched_clock changes broke picoxcell, fix included * BSYM bugs causing issues with thumb2-built kernels on SMP * Missing module.h include on msm. * A collection of bugfixes for samsung platforms that didn't make it into the first pull requests. * tag 'arm-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: make BSYM macro assembly only ARM: highbank: remove incorrect BSYM usage ARM: imx: remove incorrect BSYM usage ARM: exynos: remove incorrect BSYM usage ARM: ux500: add missing ENDPROC to headsmp.S ARM: msm: Add missing ENDPROC to headsmp.S ARM: versatile: Add missing ENDPROC to headsmp.S ARM: EXYNOS: Invert VCLK polarity for framebuffer on ORIGEN ARM: S3C64XX: Fix interrupt configuration for PCA935x on Cragganmore ARM: S3C64XX: Fix the memory mapped GPIOs on Cragganmore ARM: S3C64XX: Remove hsmmc1 from Cragganmore ARM: S3C64XX: Remove unconditional power domain disables ARM: SAMSUNG: Declare struct platform_device in plat/s3c64xx-spi.h ARM: SAMSUNG: dma-ops.h needs mach/dma.h ARM: SAMSUNG: Guard against multiple inclusion of plat/dma.h ARM: picoxcell: fix sched_clock() cleanup fallout ARM: msm: vreg is a module and so needs module.h
2012-01-18Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds6-13/+42
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them.
2012-01-18Merge branch 'for-linus' of ↵Linus Torvalds5-8/+24
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit: (29 commits) audit: no leading space in audit_log_d_path prefix audit: treat s_id as an untrusted string audit: fix signedness bug in audit_log_execve_info() audit: comparison on interprocess fields audit: implement all object interfield comparisons audit: allow interfield comparison between gid and ogid audit: complex interfield comparison helper audit: allow interfield comparison in audit rules Kernel: Audit Support For The ARM Platform audit: do not call audit_getname on error audit: only allow tasks to set their loginuid if it is -1 audit: remove task argument to audit_set_loginuid audit: allow audit matching on inode gid audit: allow matching on obj_uid audit: remove audit_finish_fork as it can't be called audit: reject entry,always rules audit: inline audit_free to simplify the look of generic code audit: drop audit_set_macxattr as it doesn't do anything audit: inline checks for not needing to collect aux records audit: drop some potentially inadvisable likely notations ... Use evil merge to fix up grammar mistakes in Kconfig file. Bad speling and horrible grammar (and copious swearing) is to be expected, but let's keep it to commit messages and comments, rather than expose it to users in config help texts or printouts.
2012-01-18Kernel: Audit Support For The ARM PlatformNathaniel Husted5-8/+24
This patch provides functionality to audit system call events on the ARM platform. The implementation was based off the structure of the MIPS platform and information in this (http://lists.fedoraproject.org/pipermail/arm/2009-October/000382.html) mailing list thread. The required audit_syscall_exit and audit_syscall_entry checks were added to ptrace using the standard registers for system call values (r0 through r3). A thread information flag was added for auditing (TIF_SYSCALL_AUDIT) and a meta-flag was added (_TIF_SYSCALL_WORK) to simplify modifications to the syscall entry/exit. Now, if either the TRACE flag is set or the AUDIT flag is set, the syscall_trace function will be executed. The prober changes were made to Kconfig to allow CONFIG_AUDITSYSCALL to be enabled. Due to platform availability limitations, this patch was only tested on the Android platform running the modified "android-goldfish-2.6.29" kernel. A test compile was performed using Code Sourcery's cross-compilation toolset and the current linux-3.0 stable kernel. The changes compile without error. I'm hoping, due to the simple modifications, the patch is "obviously correct". Signed-off-by: Nathaniel Husted <nhusted@gmail.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17Merge branch 'samsung-fixes' of ↵Olof Johansson7-25/+14
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'samsung-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Invert VCLK polarity for framebuffer on ORIGEN ARM: S3C64XX: Fix interrupt configuration for PCA935x on Cragganmore ARM: S3C64XX: Fix the memory mapped GPIOs on Cragganmore ARM: S3C64XX: Remove hsmmc1 from Cragganmore ARM: S3C64XX: Remove unconditional power domain disables ARM: SAMSUNG: Declare struct platform_device in plat/s3c64xx-spi.h ARM: SAMSUNG: dma-ops.h needs mach/dma.h ARM: SAMSUNG: Guard against multiple inclusion of plat/dma.h
2012-01-17Merge branch 'fixes-for-arm-soc' of git://sources.calxeda.com/kernel/linux ↵Olof Johansson10-14/+14
into fixes * 'fixes-for-arm-soc' of git://sources.calxeda.com/kernel/linux: ARM: make BSYM macro assembly only ARM: highbank: remove incorrect BSYM usage ARM: imx: remove incorrect BSYM usage ARM: exynos: remove incorrect BSYM usage ARM: ux500: add missing ENDPROC to headsmp.S ARM: msm: Add missing ENDPROC to headsmp.S ARM: versatile: Add missing ENDPROC to headsmp.S
2012-01-17Merge branch 'msm-fix' of git://codeaurora.org/quic/kernel/davidb/linux-msm ↵Olof Johansson1-0/+1
into fixes * 'msm-fix' of git://codeaurora.org/quic/kernel/davidb/linux-msm: ARM: msm: vreg is a module and so needs module.h
2012-01-17Merge branch 'picoxcell-fixes' of git://github.com/jamieiles/linux-2.6-ji ↵Olof Johansson1-1/+1
into fixes * 'picoxcell-fixes' of git://github.com/jamieiles/linux-2.6-ji: ARM: picoxcell: fix sched_clock() cleanup fallout
2012-01-17Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds1-1/+13
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: ARM: OMAP3: fix build on !CONFIG_IOMMU_API
2012-01-17Merge branch 'fixes' of ↵Linus Torvalds17-42/+50
git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm * 'fixes' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm: ARM: sa11x0: assabet: fix build warning ARM: Add arm_memblock_steal() to allocate memory away from the kernel ARM: 7275/1: LPAE: Check the CPU support for the long descriptor format ARM: 7274/1: NUC900: Rename nuc900-audio platform device to nuc900-ac97 ARM: 7272/1: S3C24XX: Fix build error for missing <mach/system-reset.h> ARM: 7271/1: Fix typo in conversion of ARCH_NR_GPIOS to Kconfig
2012-01-17Merge branch 'pm-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Hibernate: Drop the check of swap space size for compressed image PM / shmobile: fix A3SP suspend method PM / Domains: Skip governor functions for CONFIG_PM_RUNTIME unset PM / Domains: Fix build for CONFIG_PM_SLEEP unset PM: Make sysrq-o be available for CONFIG_PM unset
2012-01-17Merge branch 'kbuild' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: Kbuild: Use dtc's -d (dependency) option dtc: Implement -d option to write out a dependency file kbuild: Fix comment in Makefile.lib scripts/genksyms: clean lex/yacc generated files kbuild: Correctly deal with make options which contain an "s"
2012-01-17ARM: sa11x0: assabet: fix build warningRussell King1-1/+1
Since a32618d2 (ARM: pgtable: switch to use pgtable-nopud.h), assabet warns as follows: arch/arm/mach-sa1100/assabet.c: In function 'map_sa1100_gpio_regs': arch/arm/mach-sa1100/assabet.c:264: warning: passing argument 1 of 'pmd_offset' from incompatible pointer type Fix this by adding the necessary pud_offset() macro. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-16ARM: make BSYM macro assembly onlyRob Herring1-2/+2
BSYM macro is only needed for assembly files and its usage in c files is wrong, so only define it for assembly. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Dave Martin <dave.martin@linaro.org>
2012-01-16ARM: highbank: remove incorrect BSYM usageRob Herring1-2/+1
BSYM macro is only needed for assembly files and its usage in c files is wrong, so remove it. The linker will correctly set bit 0 for Thumb2 kernels. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Dave Martin <dave.martin@linaro.org>
2012-01-16ARM: imx: remove incorrect BSYM usageRob Herring1-2/+1
BSYM macro is only needed for assembly files and its usage in c files is wrong, so remove it. The linker will correctly set bit 0 for Thumb2 kernels. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Sascha Hauer <kernel@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dave Martin <dave.martin@linaro.org>
2012-01-16ARM: exynos: remove incorrect BSYM usageRob Herring2-3/+4
BSYM macro is only needed for assembly files and its usage in c files is wrong, so remove it. The linker will correctly set bit 0 for Thumb2 kernels. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Dave Martin <dave.martin@linaro.org> Cc: Kukjin Kim <kgene.kim@samsung.com>
2012-01-16ARM: ux500: add missing ENDPROC to headsmp.SRob Herring1-0/+2
Once the ENDPROC is in place, BSYM() in not longer necessary to get correct pointer to u8500_secondary_startup(). Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com>
2012-01-16ARM: msm: Add missing ENDPROC to headsmp.SRob Herring1-0/+1
Once the ENDPROC is in place, BSYM() in not longer necessary to get correct pointer to msm_secondary_startup(). Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com>
2012-01-16ARM: versatile: Add missing ENDPROC to headsmp.SPawel Moll3-5/+3
Once the ENDPROC is in place, BSYM() in not longer necessary to get correct pointer to versatile_secondary_startup(). Tested-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Dave Martin <dave.martin@linaro.org>
2012-01-16ARM: OMAP3: fix build on !CONFIG_IOMMU_APIOhad Ben-Cohen1-1/+13
omap3isp depends on CONFIG_IOMMU_API, so avoid registering its device (and defining its configuration structs) on !CONFIG_IOMMU_API. This is generally nice to have, but more importantly, it fixes: arch/arm/plat-omap/include/plat/iommu.h: In function 'dev_to_omap_iommu': arch/arm/plat-omap/include/plat/iommu.h:135: error: 'struct dev_archdata' has no member named 'iommu' arch/arm/mach-omap2/devices.c: In function 'omap3_init_camera': arch/arm/mach-omap2/devices.c:222: error: 'struct dev_archdata' has no member named 'iommu' make[1]: *** [arch/arm/mach-omap2/devices.o] Error 1 make: *** [arch/arm/mach-omap2] Error 2 Which happens because while setting up the omap3isp device we try to access the (now nonexistent) iommu member of dev_archdata. Compile tested with omap2plus_defconfig on today's: commit e343a895a9f342f239c5e3c5ffc6c0b1707e6244 Merge: 06792c4 193a667 Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Tue Jan 10 18:04:27 2012 -0800 Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Reported-by: Govindraj Raja <govindraj.raja@ti.com> Reported-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Joerg Roedel <Joerg.Roedel@amd.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-01-15Merge branch 'for-next' of git://git.infradead.org/users/dhowells/linux-headersLinus Torvalds3-4/+11
* 'for-next' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: Split trivial #if defined(__KERNEL__) && X conditionals UAPI: Don't have a #elif clause in a __KERNEL__ guard in linux/soundcard.h UAPI: Fix AHZ multiple inclusion when __KERNEL__ is removed UAPI: Make linux/patchkey.h easier to parse UAPI: Fix nested __KERNEL__ guards in video/edid.h UAPI: Alter the S390 asm include guards to be recognisable by the UAPI splitter UAPI: Guard linux/cuda.h UAPI: Guard linux/pmu.h UAPI: Guard linux/isdn_divertif.h UAPI: Guard linux/sound.h UAPI: Rearrange definition of HZ in asm-generic/param.h UAPI: Make FRV use asm-generic/param.h UAPI: Make M32R use asm-generic/param.h UAPI: Make MN10300 use asm-generic/param.h UAPI: elf_read_implies_exec() is a kernel-only feature - so hide from userspace UAPI: Don't include linux/compat.h in sparc's asm/siginfo.h UAPI: Fix arch/mips/include/asm/Kbuild to have separate header-y lines
2012-01-15Merge branch 'fbdev-next' of git://github.com/schandinat/linux-2.6Linus Torvalds8-46/+128
* 'fbdev-next' of git://github.com/schandinat/linux-2.6: (175 commits) module_param: make bool parameters really bool (drivers/video/i810) Revert "atmel_lcdfb: Adjust HFP calculation so it matches the manual." OMAPDSS: HDMI: Disable DDC internal pull up OMAPDSS: HDMI: Move duplicate code from boardfile OMAPDSS: add OrtusTech COM43H4M10XTC display support OMAP: DSS2: Support for UMSH-8173MD TFT panel ASoC: OMAP: HDMI: Move HDMI codec trigger function to generic HDMI driver OMAPDSS: HDMI: Create function to enable HDMI audio ASoC: OMAP: HDMI: Correct signature of ASoC functions ASoC: OMAP: HDMI: Introduce driver data for audio codec grvga: fix section mismatch warnings video: s3c-fb: Don't keep device runtime active when open video: s3c-fb: Hold runtime PM references when touching registers video: s3c-fb: Take a runtime PM reference when unblanked video: s3c-fb: Disable runtime PM in error paths from probe video: s3c-fb: Use s3c_fb_enable() to enable the framebuffer video: s3c-fb: Make runtime PM functional again drivers/video: fsl-diu-fb: merge fsl_diu_alloc() into map_video_memory() drivers/video: fsl-diu-fb: add default platform ops functions drivers/video: fsl-diu-fb: remove broken reference count enabling the display ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-26 12:25:46 +0300