summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2017-10-19Merge tag 'at91-fixes2' of ↵Arnd Bergmann3-3/+18
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes Fixes: second batch for 4.14: - one DT phy address fix for the new sama5d27 som1 ek - two DT ADC patches that were forgotten while moving to hardware triggers for sama5d2 (iio changes already applied) * tag 'at91-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: dts: at91: sama5d2: add ADC hw trigger edge type ARM: dts: at91: sama5d2_xplained: enable ADTRG pin ARM: dts: at91: at91-sama5d27_som1: fix PHY ID
2017-10-19Merge tag 'arm-soc/for-4.14/devicetree-fixes' of ↵Arnd Bergmann3-7/+14
http://github.com/Broadcom/stblinux into fixes Pull "Broadcom devicetree fixes for 4.14" from Florian Fainelli: This pull request contains Broadcom ARM-based SoC Device Tree fixes for 4.14, please pull the following: - Loic fixes the console path on the Raspberry Pi 3 which was not correctly set and would cause all sorts of confusion between the Bluetooth controller and the kernel console * tag 'arm-soc/for-4.14/devicetree-fixes' of http://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Fix console path on RPi3
2017-10-09ARM: dts: at91: sama5d2: add ADC hw trigger edge typeEugen Hristev1-0/+1
Added ADTRG edge type property as interrupt edge type value Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2017-10-09ARM: dts: at91: sama5d2_xplained: enable ADTRG pinEugen Hristev1-1/+15
Enable pinctrl for ADTRG pin (PD31) for ADC hardware trigger support. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2017-10-09ARM: dts: at91: at91-sama5d27_som1: fix PHY IDLudovic Desroches1-2/+2
The PHY ID is incorrect. It leads to troubles when resuming from standby or mem power states. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Fixes: af690fa37e39 ("ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support") Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2017-10-06ARM: dts: bcm283x: Fix console path on RPi3Loic Poulain3-7/+14
Contrary to other RPi devices, RPi3 uses uart0 to communicate with the BCM43438 bluetooth controller. uart1 is then used for the console. Today, the console configuration is inherited from the bcm283x dtsi (bootargs) which is not the correct one for the RPi3. This leads to routing issue and confuses the Bluetooth controller with unexpected data. This patch introduces chosen/stdout path to configure console to uart0 on bcm283x family and overwrite it to uart1 in the RPi3 dts. Create serial0/1 aliases referring to uart0 and uart1 paths. Remove unneeded earlyprintk. Fixes: 4188ea2aeb6d ("ARM: bcm283x: Define UART pinmuxing on board level") Signed-off-by: Loic Poulain <loic.poulain@gmail.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2017-10-04Merge tag 'stm32-dt-fixes-for-v4.14' of ↵Olof Johansson7-300/+538
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into fixes STM32 fixes for v4.14: --------------------- -Fix STMPE1600 bindings for stm32429i-eval board -Use right compatible for stm32f469 pinctrl. It implies to use pinctrl dedicated files for F4 SoCs. * tag 'stm32-dt-fixes-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: use right pinctrl compatible for stm32f469 ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval board Signed-off-by: Olof Johansson <olof@lixom.net>
2017-10-04ARM: dts: stm32: use right pinctrl compatible for stm32f469Alexandre Torgue7-297/+537
Currently, same stm32f429-pinctrl driver is used for stm32f429 and stm32f469. As pin map is different between those 2 MCUs, a stm32f469-pinctrl driver has been recently added. This patch -allows to use stm32f469-pinctrl driver for stm32f469 boards -reworks stm32 devicetree files to fit with stm32f429 / stm32f469 In the same time it fixes an issue when only MACH_STM32F469 flag is selected in menuconfig. Fixes: d28bcd53fa90 ("ARM: stm32: Introduce MACH_STM32F469 flag") Reported-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-10-04ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval boardAlexandre Torgue1-3/+1
To declare gpio interrupt line for STMPE1600, 2 possibilities are offered: -use gpio binding (and then the gpiolib interface inside driver) -use interrupt binding as each gpio-controller are also interrupt controller on stm32f429. In STMPE 1600 node both (gpio and interrupt) bindings are defined. This patch fixes this issue and use only interrupt binding. Fixes: c04b2e72af8d ("ARM: dts: stm32: Enable STMPE1600 gpio expander of STM32F429-EVAL board") Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-10-04Merge tag 'omap-for-v4.14/fixes-rc3' of ↵Olof Johansson6-18/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.14-rc cycle Few minor fixes for omaps, mostly just boot time warning fixes: - Drop undocumented camera binding that got merged during the merge window by accident as I applied before Sakari's comments - Fix soft reset warning for dra7 kexec boot for gpio1 as the optional clocks need to be enabled for reset - Fix dra7 kexec boot clock rate for McASP as the rate is no longer the default rate after kexec - Fix omap3 pandora MMC warning during boot - Add am33xx SPI alias like we have on other SoCs - Remove node for non-existing CPSW EMAC Ethernet on am43xx-epos-evm * tag 'omap-for-v4.14/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry ARM: dts: am33xx: Add spi alias to match SOC schematics ARM: OMAP2+: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux ARM: OMAP2+: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1 ARM: dts: nokia n900: drop unneeded/undocumented parts of the dts Signed-off-by: Olof Johansson <olof@lixom.net>
2017-10-04Merge tag 'davinci-fixes-for-v4.14' of ↵Olof Johansson1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes A fix for random ethernet mac address problem on DA850 EVM. * tag 'davinci-fixes-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850-evm: add serial and ethernet aliases Signed-off-by: Olof Johansson <olof@lixom.net>
2017-10-04Merge tag 'at91-fixes' of ↵Olof Johansson2-10/+13
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes Fixes for 4.14: - three DT fixes for the newly introduced sama5d27_som1_ek board - one treewide modification that didn't touch this new PM code: we synchronize now to be coherent with the other ARM platforms * tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91: Replace uses of virt_to_phys with __pa_symbol ARM: dts: at91: sama5d27_som1_ek: fix USB host vbus ARM: dts: at91: sama5d27_som1_ek: fix typos ARM: dts: at91: sama5d27_som1_ek: update pinmux/pinconf for LEDs and USB Signed-off-by: Olof Johansson <olof@lixom.net>
2017-10-04ARM: defconfig: update Gemini defconfigLinus Walleij1-1/+2
This updates the Gemini defconfig with drivers merged for v4.13 or v4.14: - ATA driver is merged - DMA driver is merged - RTC driver gets selected from default Kconfig Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-10-04ARM: defconfig: FRAMEBUFFER_CONSOLE can no longer be =mArnd Bergmann3-3/+3
It is no longer possible to load this at runtime, so let's change the few remaining users to have it built-in all the time. arch/arm/configs/zeus_defconfig:115:warning: symbol value 'm' invalid for FRAMEBUFFER_CONSOLE arch/arm/configs/viper_defconfig:116:warning: symbol value 'm' invalid for FRAMEBUFFER_CONSOLE arch/arm/configs/pxa_defconfig:474:warning: symbol value 'm' invalid for FRAMEBUFFER_CONSOLE Reported-by: kernelci.org bot <bot@kernelci.org> Fixes: 6104c37094e7 ("fbcon: Make fbcon a built-time depency for fbdev") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-09-30Merge tag 'led_fixes-4.14-rc3' of ↵Linus Torvalds1-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fixes from Jacek Anaszewski: "Four fixes for the as3645a LED flash controller and one update to MAINTAINERS" * tag 'led_fixes-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: MAINTAINERS: Add entry for MediaTek PMIC LED driver as3645a: Unregister indicator LED on device unbind as3645a: Use integer numbers for parsing LEDs dt: bindings: as3645a: Use LED number to refer to LEDs as3645a: Use ams,input-max-microamp as documented in DT bindings
2017-09-23as3645a: Use integer numbers for parsing LEDsSakari Ailus1-2/+6
Use integer numbers for LEDs, 0 is the flash and 1 is the indicator. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-09-23as3645a: Use ams,input-max-microamp as documented in DT bindingsSakari Ailus1-1/+1
DT bindings document the property "ams,input-max-microamp" that limits the chip's maximum input current. The driver and the DTS however used "peak-current-limit" property. Fix this by using the property documented in DT binding documentation. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-09-20ARM: dts: da850-evm: add serial and ethernet aliasesSekhar Nori1-0/+7
Add aliases for serial and ethernet nodes. Serial aliases help keep order of tty nodes fixed and ethernet alias is used by bootloader to setup mac address correctly. Reported-by: Adam Ford <aford173@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Fixes: dd7deaf218bf ("ARM: davinci: da850: add DT node for ethernet") Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-09-19ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entryYogesh Siraswar1-5/+1
On am438x EPOS boards there is only one ethernet port, remove extra port definition. This boot log warnings during PHY detection. Signed-off-by: Yogesh Siraswar <yogeshs@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-09-19ARM: dts: am33xx: Add spi alias to match SOC schematicsSuniel Mahesh1-0/+2
Linux bus numbers should match the numbers defined by the chip manufacturer. This patch add's spi aliases to achieve that bus naming convention. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org> Signed-off-by: Karthik Tummala <karthik@techveda.org> Tested-by: Karthik Tummala <karthik@techveda.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-09-19ARM: OMAP2+: hsmmc: fix logic to call either omap_hsmmc_init or ↵H. Nikolaus Schaller1-2/+2
omap_hsmmc_late_init but not both With 4.13 kernel I get this boot message: [    1.051727] ------------[ cut here ]------------ [    1.051818] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x54/0x74 [    1.051849] sysfs: cannot create duplicate filename '/devices/platform/omap_hsmmc.2' [    1.051879] Modules linked in: [    1.051971] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-letux+ #1360 [    1.052001] Hardware name: Generic OMAP3 (Flattened Device Tree) [    1.052062] [<c010f690>] (unwind_backtrace) from [<c010bba8>] (show_stack+0x10/0x14) [    1.052124] [<c010bba8>] (show_stack) from [<c075dc88>] (dump_stack+0x98/0xd0) [    1.052185] [<c075dc88>] (dump_stack) from [<c012f398>] (__warn+0xd0/0x100) [    1.052215] [<c012f398>] (__warn) from [<c012f3fc>] (warn_slowpath_fmt+0x34/0x44) [    1.052276] [<c012f3fc>] (warn_slowpath_fmt) from [<c02ebcb4>] (sysfs_warn_dup+0x54/0x74) [    1.052337] [<c02ebcb4>] (sysfs_warn_dup) from [<c02ebd90>] (sysfs_create_dir_ns+0x74/0x84) [    1.052398] [<c02ebd90>] (sysfs_create_dir_ns) from [<c0761b8c>] (kobject_add_internal+0xd0/0x294) [    1.052429] [<c0761b8c>] (kobject_add_internal) from [<c0761f00>] (kobject_add+0x6c/0x8c) [    1.052490] [<c0761f00>] (kobject_add) from [<c04e831c>] (device_add+0xe4/0x510) [    1.052551] [<c04e831c>] (device_add) from [<c04ec6e4>] (platform_device_add+0x130/0x1c0) [    1.052612] [<c04ec6e4>] (platform_device_add) from [<c01281c0>] (omap_hsmmc_late_init+0x3c/0x60) [    1.052673] [<c01281c0>] (omap_hsmmc_late_init) from [<c0b0fa44>] (omap3_pandora_legacy_init+0x24/0xb4) [    1.052734] [<c0b0fa44>] (omap3_pandora_legacy_init) from [<c0128178>] (pdata_quirks_check+0x30/0x3c) [    1.052795] [<c0128178>] (pdata_quirks_check) from [<c0b0f950>] (omap_generic_init+0xc/0x18) [    1.052856] [<c0b0f950>] (omap_generic_init) from [<c0b03480>] (customize_machine+0x1c/0x28) [    1.052917] [<c0b03480>] (customize_machine) from [<c0101938>] (do_one_initcall+0xa8/0x150) [    1.052947] [<c0101938>] (do_one_initcall) from [<c0b00d70>] (kernel_init_freeable+0x110/0x1d4) [    1.053009] [<c0b00d70>] (kernel_init_freeable) from [<c076f198>] (kernel_init+0x8/0x10c) [    1.053070] [<c076f198>] (kernel_init) from [<c01070f0>] (ret_from_fork+0x14/0x24) [    1.055023] ---[ end trace 44e490b09ac4ab88 ]--- This can be traced down to the calls of omap_hsmmc_init(pandora_mmc3); omap_hsmmc_late_init(pandora_mmc3); in omap3_pandora_legacy_init(). It turns out that both funcions disagree how to decide if the other one was alredy called. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-09-19ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_muxKeerthy1-0/+2
Assign a default parent to mcasp3_ahclkx_mux clock using the assigned-clock-parents property. This is helpful in cases like kexec where in the clock parent can be something other than the value at reset. Suggested-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-09-19ARM: OMAP2+: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1Keerthy1-0/+1
gpio1 soft reset fails in the kexec path as the optional clock is not enabled hence enable the HWMOD_CONTROL_OPT_CLKS_IN_RESET flag for gpio1 hwmod. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-09-19ARM: dts: nokia n900: drop unneeded/undocumented parts of the dtsPavel Machek1-11/+0
Sakari mentioned that some parts of the dts are not needed and do not have proper documentation, yet. As the camera works without them, remove them for now. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-09-18ARM: at91: Replace uses of virt_to_phys with __pa_symbolAlexandre Belloni1-2/+2
The PM code wrongly uses virt_to_phys() instead of __pa_symbol() and was not updated by commit 64fc2a947a98 ("ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol") because it was not yet in tree. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2017-09-18ARM: dts: at91: sama5d27_som1_ek: fix USB host vbusNicolas Ferre1-1/+4
The USB host has 3 ports so we must specify the entries for each in the atmel,vbus-gpio property. The specified pin (PA27) is the vbus for USBB and not USBA. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> [claudiu.beznea@microchip.com: change subject to match the desired prefix] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2017-09-18ARM: dts: at91: sama5d27_som1_ek: fix typosLudovic Desroches1-2/+2
Fix typos that prevent proper using of uart2 and uart4 devices. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2017-09-18ARM: dts: at91: sama5d27_som1_ek: update pinmux/pinconf for LEDs and USBLudovic Desroches1-6/+6
There are some changes from the prototype board concerning LEDs and USB pins: - USBB power enable and red LED pins are inverted. - The polarity of LEDs is inverted too. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2017-09-17arm/syscalls: Optimize address limit checkThomas Garnier2-0/+18
Disable the generic address limit check in favor of an architecture specific optimized implementation. The generic implementation using pending work flags did not work well with ARM and alignment faults. The address limit is checked on each syscall return path to user-mode path as well as the irq user-mode return function. If the address limit was changed, a function is called to report data corruption (stopping the kernel or process based on configuration). The address limit check has to be done before any pending work because they can reset the address limit and the process is killed using a SIGKILL signal. For example the lkdtm address limit check does not work because the signal to kill the process will reset the user-mode address limit. Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Pratyush Anand <panand@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Will Drewry <wad@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: David Howells <dhowells@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-api@vger.kernel.org Cc: Yonghong Song <yhs@fb.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1504798247-48833-4-git-send-email-keescook@chromium.org
2017-09-17Revert "arm/syscalls: Check address limit on user-mode return"Thomas Garnier4-23/+8
This reverts commit 73ac5d6a2b6ac3ae8d1e1818f3e9946f97489bc9. The work pending loop can call set_fs after addr_limit_user_check removed the _TIF_FSCHECK flag. This may happen at anytime based on how ARM handles alignment exceptions. It leads to an infinite loop condition. After discussion, it has been agreed that the generic approach is not tailored to the ARM architecture and any fix might not be complete. This patch will be replaced by an architecture specific implementation. The work flag approach will be kept for other architectures. Reported-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Pratyush Anand <panand@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Will Drewry <wad@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: David Howells <dhowells@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-api@vger.kernel.org Cc: Yonghong Song <yhs@fb.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1504798247-48833-3-git-send-email-keescook@chromium.org
2017-09-13Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The diff is dominated by the Allwinner A10/A20 SoCs getting converted to the sunxi-ng framework. Otherwise, the heavy hitters are various drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other new clk drivers in here too but overall this is just a bunch of clk drivers for various different pieces of hardware and a collection of non-critical fixes for clk drivers. New Drivers: - Allwinner R40 SoCs - Renesas R-Car Gen3 USB 2.0 clock selector PHY - Atmel AT91 audio PLL - Uniphier PXs3 SoCs - ARC HSDK Board PLLs - AXS10X Board PLLs - STMicroelectronics STM32H743 SoCs Removed Drivers: - Non-compiling mb86s7x support Updates: - Allwinner A10/A20 SoCs converted to sunxi-ng framework - Allwinner H3 CPU clk fixes - Renesas R-Car D3 SoC - Renesas V2H and M3-W modules - Samsung Exynos5420/5422/5800 audio fixes - Rockchip fractional clk approximation fixes - Rockchip rk3126 SoC support within the rk3128 driver - Amlogic gxbb CEC32 and sd_emmc clks - Amlogic meson8b reset controller support - IDT VersaClock 5P49V5925/5P49V6901 support - Qualcomm MSM8996 SMMU clks - Various 'const' applications for struct clk_ops - si5351 PLL reset bugfix - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2 - Assorted Tegra clk driver fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits) clk: si5351: fix PLL reset ASoC: atmel-classd: remove aclk clock ASoC: atmel-classd: remove aclk clock from DT binding clk: at91: clk-generated: make gclk determine audio_pll rate clk: at91: clk-generated: create function to find best_diff clk: at91: add audio pll clock drivers dt-bindings: clk: at91: add audio plls to the compatible list clk: at91: clk-generated: remove useless divisor loop clk: mb86s7x: Drop non-building driver clk: ti: check for null return in strrchr to avoid null dereferencing clk: Don't write error code into divider register clk: uniphier: add video input subsystem clock clk: uniphier: add audio system clock clk: stm32h7: Add stm32h743 clock driver clk: gate: expose clk_gate_ops::is_enabled clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled() clk: uniphier: add PXs3 clock data clk: hi6220: change watchdog clock source clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 clk: cs2000: Add cs2000_set_saved_rate ...
2017-09-12Merge tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2-33/+23
Pull dma-mapping updates from Christoph Hellwig: - removal of the old dma_alloc_noncoherent interface - remove unused flags to dma_declare_coherent_memory - restrict OF DMA configuration to specific physical busses - use the iommu mailing list for dma-mapping questions and patches * tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mapping: dma-coherent: fix dma_declare_coherent_memory() logic error ARM: imx: mx31moboard: Remove unused 'dma' variable dma-coherent: remove an unused variable MAINTAINERS: use the iommu list for the dma-mapping subsystem dma-coherent: remove the DMA_MEMORY_MAP and DMA_MEMORY_IO flags dma-coherent: remove the DMA_MEMORY_INCLUDES_CHILDREN flag of: restrict DMA configuration dma-mapping: remove dma_alloc_noncoherent and dma_free_noncoherent i825xx: switch to switch to dma_alloc_attrs au1000_eth: switch to dma_alloc_attrs sgiseeq: switch to dma_alloc_attrs dma-mapping: reduce dma_mapping_error inline bloat
2017-09-12Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds20-19/+59
Pull ARM updates from Russell King: "Low priority fixes and updates for ARM: - add some missing includes - efficiency improvements in system call entry code when tracing is enabled - ensure ARMv6+ is always built as EABI - export save_stack_trace_tsk() - fix fatal signal handling during mm fault - build translation table base address register from scratch - appropriately align the .data section to a word boundary where we rely on that data being word aligned" * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8691/1: Export save_stack_trace_tsk() ARM: 8692/1: mm: abort uaccess retries upon fatal signal ARM: 8690/1: lpae: build TTB control register value from scratch in v7_ttb_setup ARM: align .data section ARM: always enable AEABI for ARMv6+ ARM: avoid saving and restoring registers unnecessarily ARM: move PC value into r9 ARM: obtain thread info structure later ARM: use aliases for registers in entry-common ARM: 8689/1: scu: add missing errno include ARM: 8688/1: pm: add missing types include
2017-09-11Merge tag 'armsoc-devicetree' of ↵Linus Torvalds299-1600/+12086
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM/arm64 Devicetree updates from Olof Johansson: "As usual, device tree updates is the bulk of our material in this merge window. This time around, 559 patches affecting both 32- and 64-bit platforms. Changes are too many to list individually, but some of the larger ones: New platform/SoC support: - Automotive: + Renesas R-Car D3 (R8A77995) + TI DT76x + MediaTek mt2712e - Communication-oriented: + Qualcomm IPQ8074 + Broadcom Stingray + Marvell Armada 8080 - Set top box: + Uniphier PXs3 Besides some vendor reference boards for the SoC above, there are also several new boards/machines: - TI AM335x Moxa UC-8100-ME-T open platform - TI AM57xx Beaglebone X15 Rev C - Microchip/Atmel sama5d27 SoM1 EK - Broadcom Raspberry Pi Zero W - Gemini-based D-Link DIR-685 router - Freescale i.MX6: + Toradex Apalis module + Apalis and Ixora carrier boards + Engicam GEAM6UL Starter Kit - Freescale i.MX53-based Beckhoff CX9020 Embedded PC - Mediatek mt7623-based BananaPi R2 - Several Allwinner-based single-board computers: + Cubietruck plus + Bananapi M3, M2M and M64 + NanoPi A64 + A64-OLinuXino + Pine64 - Rockchip RK3328 Pine64/Rock64 board support - Rockchip RK3399 boards: + RK3399 Sapphire module on Excavator carrier (RK3399 reference design) + Theobroma Systems RK3399-Q7 SoM - ZTE ZX296718 PCBOX Board" * tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits) ARM: dts: at91: at91sam9g45: add AC97 arm64: dts: marvell: mcbin: enable more networking ports arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node arm64: dts: marvell: add TX interrupts for PPv2.2 arm64: dts: uniphier: add PXs3 SoC support ARM: dts: uniphier: add pinctrl groups of ethernet phy mode ARM: dts: uniphier: fix size of sdctrl nodes ARM: dts: uniphier: add AIDET nodes arm64: dts: uniphier: fix size of sdctrl node arm64: dts: uniphier: add AIDET nodes Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2" arm64: dts: uniphier: add reset controller node of analog amplifier arm64: dts: marvell: add Device Tree files for Armada-8KP arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM ARM: dts: rockchip: enable usb for rv1108-evb ARM: dts: rockchip: add usb nodes for rv1108 SoCs dt-bindings: update grf-binding for rv1108 SoCs ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers ...
2017-09-11Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-28/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This branch contains platform-related driver updates for ARM and ARM64. Among them: - Reset driver updates: + New API for dealing with arrays of resets + Make unimplemented {de,}assert return success on shared resets + MSDKv1 driver + Removal of obsolete Gemini reset driver + Misc updates for sunxi and Uniphier - SoC drivers: + Platform SoC driver registration on Tegra + Shuffle of Qualcomm drivers into a submenu + Allwinner A64 support for SRAM + Renesas R-Car R3 support + Power domains for Rockchip RK3366 - Misc updates and smaller fixes for TEE and memory driver subsystems" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set soc/tegra: fuse: Add missing semi-colon soc/tegra: Restrict SoC device registration to Tegra drivers: soc: sunxi: add support for A64 and its SRAM C drivers: soc: sunxi: add support for remapping func value to reg value drivers: soc: sunxi: fix error processing on base address when claiming dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C bus: sunxi-rsb: Enable by default for ARM64 soc/tegra: Register SoC device firmware: tegra: set drvdata earlier memory: Convert to using %pOF instead of full_name soc: Convert to using %pOF instead of full_name bus: Convert to using %pOF instead of full_name firmware: Convert to using %pOF instead of full_name soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC soc: mediatek: add header files required for MT7622 SCPSYS dt-binding soc: mediatek: reduce code duplication of scpsys_probe across all SoCs dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC reset: uniphier: add analog amplifiers reset control reset: uniphier: add video input subsystem reset control ...
2017-09-11Merge tag 'armsoc-platforms' of ↵Linus Torvalds62-389/+417
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch contains platform updates for 32- and 64-bit ARM, including defconfig updates to enable new options, drivers and platforms. There are also a few fixes and cleanups for some existing vendors. Some of the things worth highlighting here are: - Enabling new crypt drivers on arm64 defconfig - QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig - Debug support enabled for Renesas r8a7743 - Various config updates for Renesas platforms (sound, USB, other drivers) - Platform support (including SMP) for TI dra762 - OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code" * tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: multi_v7_defconfig: make eSDHC driver built-in arm64: defconfig: enable rockchip graphics MAINTAINERS: Update Cavium ThunderX2 entry ARM: config: aspeed: Add I2C, VUART, LPC Snoop ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G ARM: s3c24xx: Fix NAND ECC mode for mini2440 board ARM: davinci_all_defconfig: enable tinydrm and ST7586 arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl ARM: defconfig: tegra: Enable ChipIdea UDC driver ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig ARM: tegra: Add Tegra I2S interfaces to defconfig ARM: tegra: Update default configuration for v4.13-rc1 MAINTAINERS: update ARM/ZTE entry soc: versatile: remove unnecessary static in realview_soc_probe() ARM: Convert to using %pOF instead of full_name ARM: hisi: Fix typo in comment ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add recently added crypto drivers as modules arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG ...
2017-09-10Merge tag 'for-linus-20170904' of git://git.infradead.org/linux-mtdLinus Torvalds38-38/+38
Pull MTD updates from Boris Brezillon: "General updates: - Constify pci_device_id in various drivers - Constify device_type - Remove pad control code from the Gemini driver - Use %pOF to print OF node full_name - Various fixes in the physmap_of driver - Remove unused vars in mtdswap - Check devm_kzalloc() return value in the spear_smi driver - Check clk_prepare_enable() return code in the st_spi_fsm driver - Create per MTD device debugfs enties NAND updates, from Boris Brezillon: - Fix memory leaks in the core - Remove unused NAND locking support - Rename nand.h into rawnand.h (preparing support for spi NANDs) - Use NAND_MAX_ID_LEN where appropriate - Fix support for 20nm Hynix chips - Fix support for Samsung and Hynix SLC NANDs - Various cleanup, improvements and fixes in the qcom driver - Fixes for bugs detected by various static code analysis tools - Fix mxc ooblayout definition - Add a new part_parsers to tmio and sharpsl platform data in order to define a custom list of partition parsers - Request the reset line in exclusive mode in the sunxi driver - Fix a build error in the orion-nand driver when compiled for ARMv4 - Allow 64-bit mvebu platforms to select the PXA3XX driver SPI NOR updates, from Cyrille Pitchen and Marek Vasut: - add support to the JEDEC JESD216B specification (SFDP tables). - add support to the Intel Denverton SPI flash controller. - fix error recovery for Spansion/Cypress SPI NOR memories. - fix 4-byte address management for the Aspeed SPI controller. - add support to some Microchip SST26 memory parts - remove unneeded pinctrl header Write a message for tag:" * tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd: (74 commits) mtd: nand: complain loudly when chip->bits_per_cell is not correctly initialized mtd: nand: make Samsung SLC NAND usable again mtd: nand: tmio: Register partitions using the parsers mfd: tmio: Add partition parsers platform data mtd: nand: sharpsl: Register partitions using the parsers mtd: nand: sharpsl: Add partition parsers platform data mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller mtd: nand: qcom: support for IPQ4019 QPIC NAND controller dt-bindings: qcom_nandc: IPQ8074 QPIC NAND documentation dt-bindings: qcom_nandc: IPQ4019 QPIC NAND documentation dt-bindings: qcom_nandc: fix the ipq806x device tree example mtd: nand: qcom: support for different DEV_CMD register offsets mtd: nand: qcom: QPIC data descriptors handling mtd: nand: qcom: enable BAM or ADM mode mtd: nand: qcom: erased codeword detection configuration mtd: nand: qcom: support for read location registers mtd: nand: qcom: support for passing flags in DMA helper functions mtd: nand: qcom: add BAM DMA descriptor handling mtd: nand: qcom: allocate BAM transaction mtd: nand: qcom: DMA mapping support for register read buffer ...
2017-09-09Merge branch 'akpm' (patches from Andrew)Linus Torvalds3-6/+34
Merge more updates from Andrew Morton: - most of the rest of MM - a small number of misc things - lib/ updates - checkpatch - autofs updates - ipc/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (126 commits) ipc: optimize semget/shmget/msgget for lots of keys ipc/sem: play nicer with large nsops allocations ipc/sem: drop sem_checkid helper ipc: convert kern_ipc_perm.refcount from atomic_t to refcount_t ipc: convert sem_undo_list.refcnt from atomic_t to refcount_t ipc: convert ipc_namespace.count from atomic_t to refcount_t kcov: support compat processes sh: defconfig: cleanup from old Kconfig options mn10300: defconfig: cleanup from old Kconfig options m32r: defconfig: cleanup from old Kconfig options drivers/pps: use surrounding "if PPS" to remove numerous dependency checks drivers/pps: aesthetic tweaks to PPS-related content cpumask: make cpumask_next() out-of-line kmod: move #ifdef CONFIG_MODULES wrapper to Makefile kmod: split off umh headers into its own file MAINTAINERS: clarify kmod is just a kernel module loader kmod: split out umh code into its own file test_kmod: flip INT checks to be consistent test_kmod: remove paranoid UINT_MAX check on uint range processing vfat: deduplicate hex2bin() ...
2017-09-09Merge branches 'fixes' and 'misc' into for-linusRussell King658-6384/+13472
2017-09-09ARM: 8691/1: Export save_stack_trace_tsk()Dustin Brown1-0/+1
The kernel watchdog is a great debugging tool for finding tasks that consume a disproportionate amount of CPU time in contiguous chunks. One can imagine building a similar watchdog for arbitrary driver threads using save_stack_trace_tsk() and print_stack_trace(). However, this is not viable for dynamically loaded driver modules on ARM platforms because save_stack_trace_tsk() is not exported for those architectures. Export save_stack_trace_tsk() for the ARM architecture to align with x86 and support various debugging use cases such as arbitrary driver thread watchdog timers. Signed-off-by: Dustin Brown <dustinb@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-09-09ARM: implement memset32 & memset64Matthew Wilcox3-6/+34
Reuse the existing optimised memset implementation to implement an optimised memset32 and memset64. Link: http://lkml.kernel.org/r/20170720184539.31609-5-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-09Merge tag 'kvm-4.14-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-7/+20
Pull KVM updates from Radim Krčmář: "First batch of KVM changes for 4.14 Common: - improve heuristic for boosting preempted spinlocks by ignoring VCPUs in user mode ARM: - fix for decoding external abort types from guests - added support for migrating the active priority of interrupts when running a GICv2 guest on a GICv3 host - minor cleanup PPC: - expose storage keys to userspace - merge kvm-ppc-fixes with a fix that missed 4.13 because of vacations - fixes s390: - merge of kvm/master to avoid conflicts with additional sthyi fixes - wire up the no-dat enhancements in KVM - multiple epoch facility (z14 feature) - Configuration z/Architecture Mode - more sthyi fixes - gdb server range checking fix - small code cleanups x86: - emulate Hyper-V TSC frequency MSRs - add nested INVPCID - emulate EPTP switching VMFUNC - support Virtual GIF - support 5 level page tables - speedup nested VM exits by packing byte operations - speedup MMIO by using hardware provided physical address - a lot of fixes and cleanups, especially nested" * tag 'kvm-4.14-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (67 commits) KVM: arm/arm64: Support uaccess of GICC_APRn KVM: arm/arm64: Extract GICv3 max APRn index calculation KVM: arm/arm64: vITS: Drop its_ite->lpi field KVM: arm/arm64: vgic: constify seq_operations and file_operations KVM: arm/arm64: Fix guest external abort matching KVM: PPC: Book3S HV: Fix memory leak in kvm_vm_ioctl_get_htab_fd KVM: s390: vsie: cleanup mcck reinjection KVM: s390: use WARN_ON_ONCE only for checking KVM: s390: guestdbg: fix range check KVM: PPC: Book3S HV: Report storage key support to userspace KVM: PPC: Book3S HV: Fix case where HDEC is treated as 32-bit on POWER9 KVM: PPC: Book3S HV: Fix invalid use of register expression KVM: PPC: Book3S HV: Fix H_REGISTER_VPA VPA size validation KVM: PPC: Book3S HV: Fix setting of storage key in H_ENTER KVM: PPC: e500mc: Fix a NULL dereference KVM: PPC: e500: Fix some NULL dereferences on error KVM: PPC: Book3S HV: Protect updates to spapr_tce_tables list KVM: s390: we are always in czam mode KVM: s390: expose no-DAT to guest and migration support KVM: s390: sthyi: remove invalid guest write access ...
2017-09-08Merge branch 'kvm-ppc-fixes' of ↵Radim Krčmář5-18/+26
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc This fix was intended for 4.13, but didn't get in because both maintainers were on vacation. Paul Mackerras: "It adds mutual exclusion between list_add_rcu and list_del_rcu calls on the kvm->arch.spapr_tce_tables list. Without this, userspace could potentially trigger corruption of the list and cause a host crash or worse."
2017-09-07Merge tag 'mfd-next-4.14' of ↵Linus Torvalds12-14/+14
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - RK805 Power Management IC (PMIC) - ROHM BD9571MWV-M MFD Power Management IC (PMIC) - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs New Device Support: - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core - Add support for X-Powers AXP806 to axp20x - Add support for X-Powers AXP813 to axp20x - Add support for Intel Sunrise Point LPSS to intel-lpss-pci New Functionality: - Amend API to provide register layout; atmel-smc Fix-ups: - DT re-work; omap, nokia - Header file location change {I2C => MFD}; dm355evm_msp, tps65010 - Fix chip ID formatting issue(s); rk808 - Optionally register touchscreen devices; da9052-core - Documentation improvements; twl-core - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi - Drop unnecessary static declaration; max8925-i2c - Kconfig changes (missing deps and remove module support) - Slim down oversized licence statement; hi6421-pmic-core - Use managed resources (devm_*); lp87565 - Supply proper error checking/handling; t7l66xb Bug Fixes: - Fix counter duplication issue; da9052-core - Fix potential NULL deference issue; max8998 - Leave SPI-NOR write-protection bit alone; lpc_ich - Ensure device is put into reset during suspend; intel-lpss - Correct register offset variable size; omap-usb-tll" * tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits) mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT dt-bindings: mfd: Add bindings for ZII RAVE devices mfd: omap-usb-tll: Fix register offsets mfd: da9052: Constify spi_device_id mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend mfd: da9055: Constify i2c_device_id mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices mfd: t7l66xb: Handle return value of clk_prepare_enable mfd: Add ROHM BD9571MWV-M PMIC DT bindings mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool mfd: lp87565: Convert to use devm_mfd_add_devices() mfd: Add support for TPS68470 device mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell mfd: syscon: atmel-smc: Add helper to retrieve register layout mfd: axp20x: Use correct platform device ID for many PEK dt-bindings: mfd: axp20x: Introduce bindings for AXP813 mfd: axp20x: Add support for AXP813 PMIC dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips mfd: Add ROHM BD9571MWV-M MFD PMIC driver ...
2017-09-07Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new GPIO bit-banging driver implementing PS/2 protocol - a new power key driver for Rockchip RK805 PMIC - bunch of patches constifying various device ID structures - Elan I2C touchpad driver now supports devices with 2 buttons - other assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (76 commits) Input: byd - make array seq static, reduces object code size Input: xilinx_ps2 - fix multiline comment style Input: pxa27x_keypad - handle return value of clk_prepare_enable Input: tegra-kbc - handle return value of clk_prepare_enable Input: PS/2 gpio bit banging driver for serio bus Input: xen-kbdfront - enable auto repeat for xen keyboard frontend driver Input: ambakmi - constify amba_id Input: atmel_mxt_ts - add support for reset line Input: atmel_mxt_ts - use more managed resources Input: wacom_w8001 - constify serio_device_id Input: tsc40 - constify serio_device_id Input: touchwin - constify serio_device_id Input: touchright - constify serio_device_id Input: touchit213 - constify serio_device_id Input: penmount - constify serio_device_id Input: mtouch - constify serio_device_id Input: inexio - constify serio_device_id Input: hampshire - constify serio_device_id Input: gunze - constify serio_device_id Input: fujitsu_ts - constify serio_device_id ...
2017-09-07Merge tag 'media/v4.14-1' of ↵Linus Torvalds4-3/+17
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "Brazil's Independence Day pull request :-) This is one of the biggest media pull requests, with 625 patches affecting almost all parts of media (RC, DVB, V4L2, CEC, docs). This contains: - A lot of new drivers: * DVB frontends: mxl5xx, stv0910, stv6111; * camera flash: as3645a led driver; * HDMI receiver: adv748X; * camera sensor: Omnivision 6650 5M driver (ov6650); * HDMI CEC: ao-cec meson driver; * V4L2: Qualcom camss driver; * Remote controller: gpio-ir-tx, pwm-ir-tx and zx-irdec drivers. - The DDbridge DVB driver got a massive update, with makes it in sync with modern hardware from that vendor; - There's an important milestone on this series: the DVB documentation was written in 2003, but only started to be updated in 2007. It also used to contain several gaps from the time it was kept out of tree, mentioning error codes and device nodes that never existed upstream. On this series, it received a massive update: all non-deprecated digital TV APIs are now in sync with the current implementation; - Some DVB APIs that aren't used by any upstream driver got removed; - Other parts of the media documentation algo got updated, fixing some bugs on its PDF output and making it compatible with Sphinx version 1.6. As the number of hacks required to build PDF output reduced, I hope we'll have less troubles as newer versions of our documentation toolchain are released (famous last words); - As usual, lots of driver cleanups and improvements" * tag 'media/v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (624 commits) media: leds: as3645a: add V4L2_FLASH_LED_CLASS dependency media: get rid of removed DMX_GET_CAPS and DMX_SET_SOURCE leftovers media: Revert "[media] v4l: async: make v4l2 coexist with devicetree nodes in a dt overlay" media: staging: atomisp: sh_css_calloc shall return a pointer to the allocated space media: Revert "[media] lirc_dev: remove superfluous get/put_device() calls" media: add qcom_camss.rst to v4l-drivers rst file media: dvb headers: make checkpatch happier media: dvb uapi: move frontend legacy API to another part of the book media: pixfmt-srggb12p.rst: better format the table for PDF output media: docs-rst: media: Don't use \small for V4L2_PIX_FMT_SRGGB10 documentation media: index.rst: don't write "Contents:" on PDF output media: pixfmt*.rst: replace a two dots by a comma media: vidioc-g-fmt.rst: adjust table format media: vivid.rst: add a blank line to correct ReST format media: v4l2 uapi book: get rid of driver programming's chapter media: format.rst: use the right markup for important notes media: docs-rst: cardlists: change their format to flat-tables media: em28xx-cardlist.rst: update to reflect last changes media: v4l2-event.rst: adjust table to fit on PDF output media: docs: don't show ToC for each part on PDF output ...
2017-09-07Merge branch 'efi-core-for-linus' of ↵Linus Torvalds2-85/+105
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "The main changes in this cycle were: - Transparently fall back to other poweroff method(s) if EFI poweroff fails (and returns) - Use separate PE/COFF section headers for the RX and RW parts of the ARM stub loader so that the firmware can use strict mapping permissions - Add support for requesting the firmware to wipe RAM at warm reboot - Increase the size of the random seed obtained from UEFI so CRNG fast init can complete earlier - Update the EFI framebuffer address if it points to a BAR that gets moved by the PCI resource allocation code - Enable "reset attack mitigation" of TPM environments: this is enabled if the kernel is configured with CONFIG_RESET_ATTACK_MITIGATION=y. - Clang related fixes - Misc cleanups, constification, refactoring, etc" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/bgrt: Use efi_mem_type() efi: Move efi_mem_type() to common code efi/reboot: Make function pointer orig_pm_power_off static efi/random: Increase size of firmware supplied randomness efi/libstub: Enable reset attack mitigation firmware/efi/esrt: Constify attribute_group structures firmware/efi: Constify attribute_group structures firmware/dcdbas: Constify attribute_group structures arm/efi: Split zImage code and data into separate PE/COFF sections arm/efi: Replace open coded constants with symbolic ones arm/efi: Remove pointless dummy .reloc section arm/efi: Remove forbidden values from the PE/COFF header drivers/fbdev/efifb: Allow BAR to be moved instead of claiming it efi/reboot: Fall back to original power-off method if EFI_RESET_SHUTDOWN returns efi/arm/arm64: Add missing assignment of efi.config_table efi/libstub/arm64: Set -fpie when building the EFI stub efi/libstub/arm64: Force 'hidden' visibility for section markers efi/libstub/arm64: Use hidden attribute for struct screen_info reference efi/arm: Don't mark ACPI reclaim memory as MEMBLOCK_NOMAP
2017-09-07Merge branch 'linus' of ↵Linus Torvalds6-77/+283
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.14: API: - Defer scompress scratch buffer allocation to first use. - Add __crypto_xor that takes separte src and dst operands. - Add ahash multiple registration interface. - Revamped aead/skcipher algif code to fix async IO properly. Drivers: - Add non-SIMD fallback code path on ARM for SVE. - Add AMD Security Processor framework for ccp. - Add support for RSA in ccp. - Add XTS-AES-256 support for CCP version 5. - Add support for PRNG in sun4i-ss. - Add support for DPAA2 in caam. - Add ARTPEC crypto support. - Add Freescale RNGC hwrng support. - Add Microchip / Atmel ECC driver. - Add support for STM32 HASH module" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits) crypto: af_alg - get_page upon reassignment to TX SGL crypto: cavium/nitrox - Fix an error handling path in 'nitrox_probe()' crypto: inside-secure - fix an error handling path in safexcel_probe() crypto: rockchip - Don't dequeue the request when device is busy crypto: cavium - add release_firmware to all return case crypto: sahara - constify platform_device_id MAINTAINERS: Add ARTPEC crypto maintainer crypto: axis - add ARTPEC-6/7 crypto accelerator driver crypto: hash - add crypto_(un)register_ahashes() dt-bindings: crypto: add ARTPEC crypto crypto: algif_aead - fix comment regarding memory layout crypto: ccp - use dma_mapping_error to check map error lib/mpi: fix build with clang crypto: sahara - Remove leftover from previous used spinlock crypto: sahara - Fix dma unmap direction crypto: af_alg - consolidation of duplicate code crypto: caam - Remove unused dentry members crypto: ccp - select CONFIG_CRYPTO_RSA crypto: ccp - avoid uninitialized variable warning crypto: serpent - improve __serpent_setkey with UBSAN ...
2017-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds5-811/+1782
Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...
2017-09-06Merge branch 'next/defconfig' into next/socOlof Johansson16-48/+150
* next/defconfig: (45 commits) ARM: multi_v7_defconfig: make eSDHC driver built-in ARM: config: aspeed: Add I2C, VUART, LPC Snoop ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G ARM: davinci_all_defconfig: enable tinydrm and ST7586 ARM: defconfig: tegra: Enable ChipIdea UDC driver ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig ARM: tegra: Add Tegra I2S interfaces to defconfig ARM: tegra: Update default configuration for v4.13-rc1 ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL ARM: omap2plus_defconfig: Enable LP87565 ARM: omap2plus_defconfig: enable DP83867 phy driver ARM: configs: keystone: Enable D_CAN driver ARM: shmobile: Enable BQ32000 rtc in shmobile_defconfig ARM: configs: keystone: Enable MMC and regulators ARM: multi_v7_defconfig: Enable DMA for Renesas serial ports ARM: multi_v7_defconfig: Replace DRM_RCAR_HDMI by generic bridge options ARM: multi_v7_defconfig: Replace SND_SOC_RSRC_CARD by SND_SIMPLE_SCU_CARD ARM: shmobile: defconfig: Refresh ARM: shmobile: defconfig: Enable DMA for serial ports ARM: shmobile: defconfig: Replace DRM_RCAR_HDMI by generic bridge options ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-12 01:01:58 +0300