summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2012-03-02Merge branches 'depends/irqdomain' and 'at91/base2+cleanup' into next/dtArnd Bergmann89-3335/+2035
These two branches are a dependency for the at91 device tree changes, so we pull them in here. at91/base2+cleanup will get merged through the arm-soc cleanup2 branch, while the irqdomain tree will be sent by Grant before this one gets integrated. Conflicts: drivers/rtc/rtc-at91sam9.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-01Merge branch 'dt' of ↵Arnd Bergmann11-46/+94
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt * 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: arm/dts: Add support for TI OMAP3 EVM board arm/dts: OMAP4: Update DTS file with new GIC bindings arm/dts: OMAP3: Add i2c controller nodes arm/dts: OMAP4: Add i2c controller nodes ARM: OMAP2+: Set Kconfig dependencies for PROC_DEVICETREE arm/dts: OMAP3&4: Remove the '0x' prefix for serial nodes ARM: OMAP1: kconfig: Enable IRQ_DOMAIN by default for OMAP1 platforms ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT ARM: OMAP2+: omap_device: Replace dev_warn by dev_dbg in omap_device_build_from_dt ARM: OMAP2+: board-generic: Remove un-needed .atag_offset for DT_MACHINE ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems arm/dts: OMAP: Remove bootargs node from board files
2012-02-29Merge branch 'at91-3.4-base2+cleanup' of ↵Arnd Bergmann202-5481/+2697
git://github.com/at91linux/linux-at91 into at91/staging/base2+cleanup * 'at91-3.4-base2+cleanup' of git://github.com/at91linux/linux-at91: (20 commits) ARM: at91: properly sort dtb files in Makefile.boot ARM: at91: add at91sam9g25ek.dts in Makefile.boot ARM: at91/board-dt: drop default console Atmel: move console default platform_device to serial driver ARM: at91: merge SRAM Memory banks thanks to mirroring ARM: at91: finally drop at91_sys_read/write ARM: at91/rtc-at91sam9: pass the GPBR to use via resources ARM: at91:rtc/rtc-at91sam9: ioremap register bank ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use ARM: at91/PMC: make register base soc independent ARM: at91/PMC: move assignment out of printf ARM: at91/pm_slowclock: add runtime detection of memory contoller ARM: at91: make sdram/ddr register base soc independent ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h ARM: at91/pm_slowclock: function slow_clock() accepts parameters ARM: at91/pm_slowclock: rename register to named define ARM: at91/ST: remove not needed casts ARM: at91: make ST (System Timer) soc independent ARM: at91: make matrix register base soc independent ARM: at91/at91x40: remove use of at91_sys_read/write Based on top of the at91/9x5, rmk/for-armsoc, at91/device-board, at91/pm_cleanup and at91/base. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28Merge branch 'imx/dt' of git://git.linaro.org/people/shawnguo/linux-2.6 into ↵Arnd Bergmann28-120/+368
next/dt * 'imx/dt' of git://git.linaro.org/people/shawnguo/linux-2.6: (7 commits) ARM: dts: imx6q-sabrelite: add vmmc-supply for usdhc ARM: dts: imx6q-arm2: add vmmc-supply for usdhc ARM: dts: imx51-babbage: update mc13892 device ARM: dts: imx6q-sabrelite: add sgtl5000 audio codec ARM: dts: imx6q-sabrelite: add 2p5v and 3p3v regulators ARM i.MX5/6: Add dt support for generic boards ARM: imx5: generate dtbs for imx5 boards (update to Linux 3.3-rc5)
2012-02-27ARM: dts: imx6q-sabrelite: add vmmc-supply for usdhcShawn Guo1-0/+2
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-02-27ARM: dts: imx6q-arm2: add vmmc-supply for usdhcShawn Guo1-0/+14
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-02-27ARM: dts: imx51-babbage: update mc13892 deviceShawn Guo1-2/+89
It adds regulators, removes invalid property fsl,mc13xxx-uses-regulator, and fixes interrupt for mc13892. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-02-27ARM: dts: imx6q-sabrelite: add sgtl5000 audio codecRichard Zhao1-0/+12
Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-02-27ARM: dts: imx6q-sabrelite: add 2p5v and 3p3v regulatorsRichard Zhao1-0/+20
Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-02-27ARM i.MX5/6: Add dt support for generic boardsSascha Hauer3-0/+3
Apart from the iomux setup which may not be needed on custom boards the kernel starts fine using the devicetree, so add generic boards to the dt_compat entries. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-02-27ARM: imx5: generate dtbs for imx5 boardsShawn Guo1-0/+3
It helps to generate device tree blobs for imx5 boards with command 'make ARCH=arm dtbs'. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-02-25Merge branch 'for_3.4/dts_updates' of ↵Tony Lindgren78-440/+642
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into dt
2012-02-25arm/dts: Add support for TI OMAP3 EVM boardVaibhav Hiremath1-0/+20
Add OMAP3 EVM (OMAP3530, AM/DM37x) DTS file to use the omap3.dtsi SoC file, along with memory node information. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2012-02-25arm/dts: OMAP4: Update DTS file with new GIC bindingsBenoit Cousson1-1/+1
The GIC binding was updated in 3.2 and expects 3 interrupt-cells. - Update the #interrupt-cells Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com>
2012-02-25arm/dts: OMAP3: Add i2c controller nodesBenoit Cousson1-0/+21
Add i2c controllers nodes into the main ocp bus. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
2012-02-25arm/dts: OMAP4: Add i2c controller nodesBenoit Cousson1-0/+28
Add i2c controllers nodes into the main ocp bus. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2012-02-24Merge branch 'vexpress-dt-v3.3-rc4' of ↵Arnd Bergmann124-1664/+2266
git://git.linaro.org/people/pawelmoll/linux into next/dt * 'vexpress-dt-v3.3-rc4' of git://git.linaro.org/people/pawelmoll/linux: (573 commits) ARM: vexpress: Add Device Tree for V2P-CA15 core tile (TC1 variant) ARM: vexpress: Add Device Tree for V2P-CA9 core tile ARM: vexpress: Add Device Tree for V2P-CA5s core tile ARM: vexpress: Motherboard RS1 memory map support ARM: vexpress: Add Device Tree support ARM: vexpress: Use FDT data in platform SMP calls ARM: versatile: Map local timers using Device Tree when possible ARM: vexpress: Get rid of MMIO_P2V This adds full device tree boot support for the versatile express platform, as has been awaited for a long time. Conflicts: arch/arm/mach-vexpress/core.h The definition of AMBA_DEVICE was removed in one branch, and the definition of MMIO_P2V was removed in the other branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-24ARM: vexpress: Add Device Tree for V2P-CA15 core tile (TC1 variant)Pawel Moll3-2/+160
This patch adds Device Tree file for the CoreTile Express A15x2 (V2P-CA15) with Test Chip 1. As the chip's GIC has 160 interrupt inputs and equivalent SMM (FPGA) has GIC synthesised with 256 interrupts, NR_IRQS is increased. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-24ARM: vexpress: Add Device Tree for V2P-CA9 core tilePawel Moll2-1/+194
This patch adds Device Tree file for the CoreTile Express A9x4 (V2P-CA9). Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-24ARM: vexpress: Add Device Tree for V2P-CA5s core tilePawel Moll2-0/+164
This patch adds Device Tree file for the CoreTile Express A5x2 (V2P-CA5s). Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-24ARM: vexpress: Motherboard RS1 memory map supportPawel Moll4-6/+309
This patch adds support for RS1 memory map based Versatile Express motherboard. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-24ARM: vexpress: Add Device Tree supportPawel Moll5-5/+403
This patch adds generic Versatile Express DT machine description, Device Tree description for the motherboard and documentation for the bindings. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-24ARM: vexpress: Use FDT data in platform SMP callsPawel Moll2-2/+155
Scan flatten device looking for A5/A9 SCU node and initialize it using base address in "reg" property. If nothing is found, assume that there is no special SCU initialization required and initialize CPUs basing on numbers of "cpu" type devices in "cpus" node of the Device Tree. All this happens only if the board was booted with FDT, otherwise ct_desc callbacks are used. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-24arch/arm/mach-shmobile/board-ag5evm.c: included linux/dma-mapping.h twiceDanny Kukawka1-1/+0
arch/arm/mach-shmobile/board-ag5evm.c: included 'linux/dma-mapping.h' twice, remove the duplicate. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-02-24ARM: mach-shmobile: r8a7779 PFC IPSR4 fixMagnus Damm1-1/+1
Fix the bit field width information for the IPSR4 register in the r8a7779 pin function controller (PFC). Without this fix the Marzen board fails to receive data over the serial console due to misconfigured pin function for the RX pin. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-02-24ARM: mach-shmobile: sh73a0 PSTR 32-bit access fixMagnus Damm1-1/+1
Convert the sh73a0 SMP code to use 32-bit PSTR access. This fixes wakeup from deep sleep for sh73a0 secondary CPUs. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into ↵Paul Mundt258-2775/+1634
rmobile-fixes-for-linus
2012-02-24ARM: OMAP2+: Set Kconfig dependencies for PROC_DEVICETREETony Lindgren1-1/+1
Otherwise we get: warning: (ARCH_OMAP2PLUS) selects PROC_DEVICETREE which has unmet direct dependencies (OF && PROC_FS && !SPARC) Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-23ARM: versatile: Map local timers using Device Tree when possiblePawel Moll1-0/+26
Try to map TWD registers basing on a "arm,*-twd-timer" Device Tree node. This overrides existing twd_base value. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-23ARM: vexpress: Get rid of MMIO_P2VPawel Moll7-98/+102
This patch gets rid of the MMIO_P2V and __MMIO_P2V macros, defining constant virtual base for motherboard and tile peripherals instead. Additionally, in preparation for the new motherboard memory map, the motherboard peripherals are using base pointers calculated in runtime, instead of compile-time calculated values. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-23ARM: at91: properly sort dtb files in Makefile.bootJean-Christophe PLAGNIOL-VILLARD1-1/+6
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91: add at91sam9g25ek.dts in Makefile.bootNicolas Ferre1-0/+1
Reported-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91/board-dt: drop default consoleJean-Christophe PLAGNIOL-VILLARD2-9/+0
This default console mechanism is not used if the console is selected by command line (console= parameter). Dropping this will simplify the compilation of multiple SoC in the same kernel image. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23Atmel: move console default platform_device to serial driverJean-Christophe PLAGNIOL-VILLARD7-7/+0
This variable spread on every SoC that is using the atmel_serial.c driver can be included directly into the latter. This will allow to compile multiple soc in the same kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: kernel@avr32linux.org
2012-02-23ARM: at91: merge SRAM Memory banks thanks to mirroringJean-Christophe PLAGNIOL-VILLARD2-8/+9
On at91sam9260 and at91sam9g20 the SRAM banks are mirrored. We can merge them together to be able to have bigger and continuous internal RAM. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91: finally drop at91_sys_read/writeJean-Christophe PLAGNIOL-VILLARD1-18/+0
Remove at91_sys_read/write() from io.h file. This function is not used anymore and was a stopper on the way to single zImage kernel for AT91. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91/rtc-at91sam9: pass the GPBR to use via resourcesJean-Christophe PLAGNIOL-VILLARD10-27/+95
The GPBR registers are used for storing RTC values. The GPBR registers to use are now provided using standard resource entry. The array is filled in SoC specific code. rtc-at91sam9 RTT as RTC driver is modified to retrieve this information. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: rework resources assignment] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com>
2012-02-23ARM: at91/rtc-at91sam9: each SoC can select the RTT device to useJean-Christophe PLAGNIOL-VILLARD5-0/+66
For the RTT as RTC driver rtc-at91sam9, the platform_device structure is filled during SoC initialization. This will allow to convert this RTC driver as a standard platform driver. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91/PMC: make register base soc independentJean-Christophe PLAGNIOL-VILLARD13-92/+101
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com>
2012-02-23ARM: at91/PMC: move assignment out of printfNicolas Ferre1-5/+10
We move the assignment of values of register out of the seq_printf() calls: It is obviously more readable. Reported-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91/pm_slowclock: add runtime detection of memory contollerJean-Christophe PLAGNIOL-VILLARD3-22/+68
This will allow to have all SoC in one kernel image. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91: make sdram/ddr register base soc independentJean-Christophe PLAGNIOL-VILLARD33-87/+111
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.hJean-Christophe PLAGNIOL-VILLARD5-49/+70
This cleanup is done to allow to have multiple SoC in the same image. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91/pm_slowclock: function slow_clock() accepts parametersJean-Christophe PLAGNIOL-VILLARD2-35/+26
Change slow_clock()/at91_slow_clock() prototype to accept the PMC base address and one or two RAM controller addresses by parameters. The r0, r1 and r2 registers are used differently and preserved during function call. Those values are defined in pm.c and slow_clock() function is called from there with its new parameters. This will allow to have a soc independent pm_slowclock. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Ached-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91/pm_slowclock: rename register to named defineJean-Christophe PLAGNIOL-VILLARD1-86/+91
This patch will give a name to ARM registers in the assembly source code. It is done to simplify the code reading and the passing of parameters to functions. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91/ST: remove not needed castsNicolas Ferre1-3/+3
Remove the unnecessary (void) cast on at91_st_read() return value. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Ryan Mallon <rmallon@gmail.com>
2012-02-23ARM: at91: make ST (System Timer) soc independentJean-Christophe PLAGNIOL-VILLARD5-27/+50
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com>
2012-02-23ARM: at91: make matrix register base soc independentJean-Christophe PLAGNIOL-VILLARD25-150/+194
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com> Cc: linux-usb@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-22Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds11-13/+25
A few more things this time around. The only thing warranting some commentry is the modpost change, which allows folk building a Thumb2 enabled kernel to see section mismatch warnings. This is why many weren't noticed with OMAP. * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM/audit: include audit header and fix audit arch ARM: OMAP: fix voltage domain build errors with PM_OPP disabled ARM/PCI: Remove ARM's duplicate definition of 'pcibios_max_latency' ARM: 7336/1: smp_twd: Don't register CPUFREQ notifiers if local timers are not initialised ARM: 7327/1: need to include asm/system.h in asm/processor.h ARM: 7326/2: PL330: fix null pointer dereference in pl330_chan_ctrl() ARM: 7164/3: PL330: Fix the size of the dst_cache_ctrl field ARM: 7325/1: fix v7 boot with lockdep enabled ARM: 7324/1: modpost: Fix section warnings for ARM for many compilers ARM: 7323/1: Do not allow ARM_LPAE on pre-ARMv7 architectures
2012-02-21ARM/audit: include audit header and fix audit archEric Paris1-1/+8
Both bugs being fixed were introduced in: 29ef73b7a823b77a7cd0bdd7d7cded3fb6c2587b Include linux/audit.h to fix below build errors: CC arch/arm/kernel/ptrace.o arch/arm/kernel/ptrace.c: In function 'syscall_trace': arch/arm/kernel/ptrace.c:919: error: implicit declaration of function 'audit_syscall_exit' arch/arm/kernel/ptrace.c:921: error: implicit declaration of function 'audit_syscall_entry' arch/arm/kernel/ptrace.c:921: error: 'AUDIT_ARCH_ARMEB' undeclared (first use in this function) arch/arm/kernel/ptrace.c:921: error: (Each undeclared identifier is reported only once arch/arm/kernel/ptrace.c:921: error: for each function it appears in.) make[1]: *** [arch/arm/kernel/ptrace.o] Error 1 make: *** [arch/arm/kernel] Error 2 This part of the patch is: Reported-by: Axel Lin <axel.lin@gmail.com> Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com> (They both provided patches to fix it) This patch also (at the request of the list) fixes the fact that ARM has both LE and BE versions however the audit code was called as if it was always BE. If audit userspace were to try to interpret the bits it got from a LE system it would obviously do so incorrectly. Fix this by using the right arch flag on the right system. This part of the patch is: Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-16 21:31:55 +0300