| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- In copy_highpage(), only reset the tag of the destination pointer if
KASAN_HW_TAGS is enabled so that user-space MTE does not interfere
with KASAN_SW_TAGS (which relies on top-byte-ignore).
- Remove warning if SME is detected without SVE, the kernel can cope
with such configuration (though none in the field currently).
- In cfi_handler(), pass the ESR_EL1 value to die() for consistency
with other die() callers.
- Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP on arm64 since the pte
manipulation from the generic vmemmap_remap_pte() does not follow the
required ARM break-before-make sequence (clear the pte, flush the
TLBs, set the new pte). It may be re-enabled once this sequence is
sorted.
- Fix possible memory leak in the arm64 ACPI code if the SMCCC version
and conduit checks fail.
- Forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE since gcc ignores
-falign-functions=N with -Os.
- Don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN as no
randomisation would actually take place.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kaslr: don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN
arm64: ftrace: forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE
arm64: acpi: Fix possible memory leak of ffh_ctxt
arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP
arm64: pass ESR_ELx to die() of cfi_handler
arm64/fpsimd: Remove warning for SME without SVE
arm64: Reset KASAN tag in copy_highpage with HW tags only
|
|
Our virtual KASLR displacement is a randomly chosen multiple of
2 MiB plus an offset that is equal to the physical placement modulo 2
MiB. This arrangement ensures that we can always use 2 MiB block
mappings (or contiguous PTE mappings for 16k or 64k pages) to map the
kernel.
This means that a KASLR offset of less than 2 MiB is simply the product
of this physical displacement, and no randomization has actually taken
place. Currently, we use 'kaslr_offset() > 0' to decide whether or not
randomization has occurred, and so we misidentify this case.
If the kernel image placement is not randomized, modules are allocated
from a dedicated region below the kernel mapping, which is only used for
modules and not for other vmalloc() or vmap() calls.
When randomization is enabled, the kernel image is vmap()'ed randomly
inside the vmalloc region, and modules are allocated in the vicinity of
this mapping to ensure that relative references are always in range.
However, unlike the dedicated module region below the vmalloc region,
this region is not reserved exclusively for modules, and so ordinary
vmalloc() calls may end up overlapping with it. This should rarely
happen, given that vmalloc allocates bottom up, although it cannot be
ruled out entirely.
The misidentified case results in a placement of the kernel image within
2 MiB of its default address. However, the logic that randomizes the
module region is still invoked, and this could result in the module
region overlapping with the start of the vmalloc region, instead of
using the dedicated region below it. If this happens, a single large
vmalloc() or vmap() call will use up the entire region, and leave no
space for loading modules after that.
Since commit 82046702e288 ("efi/libstub/arm64: Replace 'preferred'
offset with alignment check"), this is much more likely to occur on
systems that boot via EFI but lack an implementation of the EFI RNG
protocol, as in that case, the EFI stub will decide to leave the image
where it found it, and the EFI firmware uses 64k alignment only.
Fix this, by correctly identifying the case where the virtual
displacement is a result of the physical displacement only.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230223204101.1500373-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Florian reports that when building with CONFIG_CC_OPTIMIZE_FOR_SIZE=y,
he sees "Misaligned patch-site" warnings at boot, e.g.
| Misaligned patch-site bcm2836_arm_irqchip_handle_irq+0x0/0x88
| WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
This is because GCC will silently ignore `-falign-functions=N` when
passed `-Os`, resulting in functions not being aligned as we expect.
This is a known issue, and to account for this we modified the kernel to
avoid `-Os` generally. Unfortunately we forgot to account for
CONFIG_CC_OPTIMIZE_FOR_SIZE.
Forbid the use of CALL_OPS with CONFIG_CC_OPTIMIZE_FOR_SIZE=y to prevent
this issue. All exising ftrace features will work as before, though
without the performance benefit of CALL_OPS.
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Link: http://lore.kernel.org/linux-arm-kernel/2d9284c3-3805-402b-5423-520ced56d047@gmail.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230227115819.365630-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A few bugfixes already came up during the merge window. Samsung,
ASpeed, Spear have minor DT changes, in case of Samsung this fixes a
regression compared to earlier versions.
Bartosz takes over as the primary maintainer for the TI DaVinci
platform, and we get a few last minute defconfig changes"
* tag 'arm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: spear320-hmi: correct STMPE GPIO compatible
ARM: dts: aspeed: p10bmc: Update battery node name
arm64: defconfig: Add IOSCHED_BFQ to the default configs
arm64: defconfig: Fix unintentional disablement of PCI on i.MX
ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
ARM: dts: exynos: correct TMU phandle in Odroid HC1
ARM: dts: exynos: correct TMU phandle in Odroid XU
ARM: dts: exynos: correct TMU phandle in Exynos5250
ARM: dts: exynos: correct TMU phandle in Exynos4210
ARM: dts: exynos: correct TMU phandle in Exynos4
MAINTAINERS: make me the maintainer of DaVinci platforms
|
|
ARM64 systems are often memory constrained and more often than not
use slow single-channel storage such as flash memory or MMC/SD-cards.
For any interactive systems (such as mobile phones, tablets,
chromebooks...) the BFQ I/O scheduler will be desireable.
Make sure the BFQ I/O scheduler is available on these systems.
ARM (32), Loongarch, MIPS, m68k, UM and S390 has also enabled BFQ in
their defconfigs, cf commit b495dfed706c4c5873c0dab8930ad6eb1d276a6c
"um: Cleanup CONFIG_IOSCHED_CFQ" where the motivation is that
it replaces the former CFQ scheduler.
Cc: linux-arm-kernel@lists.infradead.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230224135230.2295826-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A recent update to support PCI endpoint mode on i.MX platforms
unintentionally disabled PCI host support for i.MX in defconfig. The
existing PCI_IMX6 was made a hidden option, selected by new options
PCI_IMX6_HOST (for the existing support) and PCI_IMX6_EP (for the
endpoint mode), but there has been no corresponding update to defconfig
so the PCI_IMX6 ends up getting disabled. Switch defconfig to
PCI_IMX6_HOST to preserve the existing functionality.
Fixes: 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/20230220-imx-pci-defconfig-v1-1-2210cf08340e@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have one small patch to the clk core this time around. It fixes a
corner case with the CLK_OPS_PARENT_ENABLE flag combined with
clk_core_is_enabled() where it hangs the system. We'll simply assume
the clk is disabled if the parent is disabled and the flag is set.
Trying to turn on the parent to check the enable state of the clk runs
into system hangs at boot. We let this bake in -next for a couple
weeks to make sure there aren't any more issues because the last
attempt to fix this ran into hangs and had to be reverted.
Note: There were some more patches to the core framework around
sync_state and disabling unused clks, but I asked for that to be
reverted from the qcom PR because it isn't ready and we're still
discussing the best solution on the list.
Outside of the core clk framework, we have the usual collection of clk
driver updates and support for new SoCs (which seems to never stop).
The dirstat is dominated by Qualcomm because they added support for
quite a few SoCs this time around and also migrated quite a few of
their drivers to clk_parent_data. The other big diff is in the
Mediatek clk drivers that saw a significant rework this cycle to
similarly modernize the code, and we'll see that work continue in the
next cycle as well. Nothing really jumps out as scary here, except
that the significant churn in parent data descriptions can have typos
that go unnoticed. More details below.
Core:
- Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
New Drivers:
- Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET
ref clocks
- Support for Mediatek MT7891 SoC clks
- Support for many Qualcomm clk controllers:
- QDU1000/QRU1000 global clock controller
- SA8775P global clock controller
- SM8550 TCSR and display clock controller
- SM6350 clock controller
- MSM8996 CBF and APCS clock controllers
Updates:
- Various cleanups and improvements to Mediatek clk drivers to reduce
code size and modernize the drivers
- Support for Versa 5P49V60 clks
- Disable R-Car H3 ES1.*, as it was only available to an internal
development group and needed a lot of quirks and workarounds
- Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
resets on Renesas RZ/V2M
- Add display clocks on Renesas R-Car V4H
- Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
- Free the imx_uart_clocks even if imx_register_uart_clocks returns
early
- Get the stdout clocks count from device tree on i.MX
- Drop the clock count argument from imx_register_uart_clocks()
- Keep the uart clocks on i.MX93 for when earlycon is used
- Fix SPDX comment in i.MX6SLL clocks bindings header
- Drop some unnecessary spaces from i.MX8ULP clocks bindings header
- Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
not configured via devicetree
- Fix the ENET1 gate configuration for i.MX6UL according to the
reference manual
- Add ENET refclock mux support for i.MX6UL
- Add support for USB host/device configuration on Renesas RZ/N1
- Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car
V4H
- Add D1 CAN bus gates and resets for Allwinner
- Mark D1 CPUX clock as critical on Allwinner
- Reuse D1 driver for Allwinner R528/T113
- Cleanup sunxi-ng Kconfig
- Fix sunxi-ng kernel-doc issues
- Model Allwinner H3/H5 DRAM clock as fixed clock
- Use .determine_rate() instead of .round_rate() for the dualdiv,
mpll, sclk-div and cpu-dyn-div amlogic clock drivers
- DDR clocks were marked as critical in the proper clock driver for
each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
in the next releases as it only does clock enablement
- Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some
of them may use it
- Support synchronous power_off requests in the qcom GDSC driver for
proper GPU power collapse
- Drop test clocks from various Qualcomm clk drivers
- Update parent references to use clk_parent_data/clk_hw in various
Qualcomm clk drivers
- Fixes for the Qualcomm MSM8996 CPU clock controller
- Transition Qualcomm MSM8974 GCC off the externally defined
sleep_clk
- Add GDSCs in the global clock controller for Qualcomm QCS404
- The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
- Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and
SDM845 are moved to use the recently introduced properties in the
GDSC struct
- Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and
the IPA clock is added on a variety of platforms
- De-duplicate identical clks in Qualcomm SMD RPM clk driver
- Add a few missing clocks across msm8998, msm8992, msm8916, qcs404
to Qualcomm SDM RPM clk driver
- Various Qualcomm clk drivers use devm_pm_runtime_enable() to
simplify"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits)
clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
clk: qcom: Revert sync_state based clk_disable_unused
clk: imx: pll14xx: fix recalc_rate for negative kdiv
clk: rs9: Drop unused pin_xin field
MAINTAINERS: clk: imx: Add Peng Fan as reviewer
clk: sprd: Add dependency for SPRD_UMS512_CLK
clk: ralink: fix 'mt7621_gate_is_enabled()' function
clk: mediatek: clk-mtk: Remove unneeded semicolon
dt-bindings: clock: remove stih416 bindings
dt-bindings: clock: add loongson-2 clock
dt-bindings: clock: add loongson-2 clock include file
clk: imx: fix compile testing imxrt1050
clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
clk: qcom: cpu-8996: add missing cputype include
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits)
tty: n_gsm: add keep alive support
serial: imx: remove a redundant check
dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
tty: n_gsm: add TIOCMIWAIT support
tty: n_gsm: add RING/CD control support
tty: n_gsm: mark unusable ioctl structure fields accordingly
serial: imx: get rid of registers shadowing
serial: imx: refine local variables in rxint()
serial: imx: stop using USR2 in FIFO reading loop
serial: imx: remove redundant USR2 read from FIFO reading loop
serial: imx: do not break from FIFO reading loop prematurely
serial: imx: do not sysrq broken chars
serial: imx: work-around for hardware RX flood
serial: imx: factor-out common code to imx_uart_soft_reset()
serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
serial: 8250_pci1xxxx: Add driver for quad-uart support
serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
tty: pcn_uart: fix memory leak with using debugfs_lookup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues"
* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
usb: dwc3: xilinx: Remove unused of_gpio,h
usb: typec: pd: Add higher capability sysfs for sink PDO
usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
usb: dwc3: pci: add support for the Intel Meteor Lake-M
usb: gadget: u_ether: Don't warn in gether_setup_name_default()
usb: gadget: u_ether: Convert prints to device prints
usb: gadget: u_serial: Add null pointer check in gserial_resume
usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
xhci: host: potential NULL dereference in xhci_generic_plat_probe()
dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
of: device: Do not ignore error code in of_device_uevent_modalias
of: device: Ignore modalias of reused nodes
usb: gadget: configfs: Fix set but not used variable warning
usb: gadget: uvc: Use custom strings if available
usb: gadget: uvc: Allow linking function to string descs
usb: gadget: uvc: Pick up custom string descriptor IDs
usb: gadget: uvc: Allow linking XUs to string descriptors
usb: gadget: configfs: Attach arbitrary strings to cdev
usb: gadget: configfs: Support arbitrary string descriptors
...
|
|
Allocated 'ffh_ctxt' memory leak is possible if the SMCCC version
and conduit checks fail and -EOPNOTSUPP is returned without freeing the
allocated memory.
Fix the same by moving the allocation after the SMCCC version and
conduit checks.
Fixes: 1d280ce099db ("arm64: Add architecture specific ACPI FFH Opregion callbacks")
Cc: <stable@vger.kernel.org> # 6.2.x
Cc: Will Deacon <will@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Suggested-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202302191417.dAl9NuE8-lkp@intel.com/
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230223135742.2952091-1-sudeep.holla@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Revert the HUGETLB_PAGE_FREE_VMEMMAP selection from commit 1e63ac088f20
("arm64: mm: hugetlb: enable HUGETLB_PAGE_FREE_VMEMMAP for arm64") but
keep the flush_dcache_page() compound_head() change as it aligns with
the corresponding check in the __sync_icache_dcache() function.
The original config option was renamed in commit 47010c040dec ("mm:
hugetlb_vmemmap: cleanup CONFIG_HUGETLB_PAGE_FREE_VMEMMAP*") to
HUGETLB_PAGE_OPTIMIZE_VMEMMAP and the flush_dcache_page() check was
further simplified by commit 2da1c30929a2 ("mm: hugetlb_vmemmap: delete
hugetlb_optimize_vmemmap_enabled()").
The reason for the revert is that the generic vmemmap_remap_pte()
function changes both the permissions (writeable to read-only) and the
output address (pfn) of the vmemmap ptes. This is deemed UNPREDICTABLE
by the Arm architecture without a break-before-make sequence (make the
PTE invalid, TLBI, write the new valid PTE). However, such sequence is
not possible since the vmemmap may be concurrently accessed by the
kernel. Disable the optimisation until a better solution is found.
Fixes: 1e63ac088f20 ("arm64: mm: hugetlb: enable HUGETLB_PAGE_FREE_VMEMMAP for arm64")
Cc: <stable@vger.kernel.org> # 5.19.x
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/Y9pZALdn3pKiJUeQ@arm.com
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230222175232.540851-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"A healthy mix of EFI contributions this time:
- Performance tweaks for efifb earlycon (Andy)
- Preparatory refactoring and cleanup work in the efivar layer, which
is needed to accommodate the Snapdragon arm64 laptops that expose
their EFI variable store via a TEE secure world API (Johan)
- Enhancements to the EFI memory map handling so that Xen dom0 can
safely access EFI configuration tables (Demi Marie)
- Wire up the newly introduced IBT/BTI flag in the EFI memory
attributes table, so that firmware that is generated with ENDBR/BTI
landing pads will be mapped with enforcement enabled
- Clean up how we check and print the EFI revision exposed by the
firmware
- Incorporate EFI memory attributes protocol definition and wire it
up in the EFI zboot code (Evgeniy)
This ensures that these images can execute under new and stricter
rules regarding the default memory permissions for EFI page
allocations (More work is in progress here)
- CPER header cleanup (Dan Williams)
- Use a raw spinlock to protect the EFI runtime services stack on
arm64 to ensure the correct semantics under -rt (Pierre)
- EFI framebuffer quirk for Lenovo Ideapad (Darrell)"
* tag 'efi-next-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3
arm64: efi: Make efi_rt_lock a raw_spinlock
efi: Add mixed-mode thunk recipe for GetMemoryAttributes
efi: x86: Wire up IBT annotation in memory attributes table
efi: arm64: Wire up BTI annotation in memory attributes table
efi: Discover BTI support in runtime services regions
efi/cper, cxl: Remove cxl_err.h
efi: Use standard format for printing the EFI revision
efi: Drop minimum EFI version check at boot
efi: zboot: Use EFI protocol to remap code/data with the right attributes
efi/libstub: Add memory attribute protocol definitions
efi: efivars: prevent double registration
efi: verify that variable services are supported
efivarfs: always register filesystem
efi: efivars: add efivars printk prefix
efi: Warn if trying to reserve memory under Xen
efi: Actually enable the ESRT under Xen
efi: Apply allowlist to EFI configuration tables when running under Xen
efi: xen: Implement memory descriptor lookup based on hypercall
efi: memmap: Disregard bogus entries instead of returning them
...
|
|
Commit 0f2cb928a154 ("arm64: consistently pass ESR_ELx to die()") caused
all callers to pass the ESR_ELx value to die().
For consistency, this patch also adds esr to die() call of cfi_handler.
Also, when CFI error occurs, die handlers can use ESR_ELx value.
Signed-off-by: Sangmoon Kim <sangmoon.kim@samsung.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230220073441.2753-1-sangmoon.kim@samsung.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Support for SME without SVE is architecturally valid and has now been tested
well enough so let's remove the warning message that is displayed at boot.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230209-arm64-sme-no-sve-v1-1-74eb3df2f878@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
During page migration, the copy_highpage function is used to copy the
page data to the target page. If the source page is a userspace page
with MTE tags, the KASAN tag of the target page must have the match-all
tag in order to avoid tag check faults during subsequent accesses to the
page by the kernel. However, the target page may have been allocated in
a number of ways, some of which will use the KASAN allocator and will
therefore end up setting the KASAN tag to a non-match-all tag. Therefore,
update the target page's KASAN tag to match the source page.
We ended up unintentionally fixing this issue as a result of a bad
merge conflict resolution between commit e059853d14ca ("arm64: mte:
Fix/clarify the PG_mte_tagged semantics") and commit 20794545c146 ("arm64:
kasan: Revert "arm64: mte: reset the page tag in page->flags""), which
preserved a tag reset for PG_mte_tagged pages which was considered to be
unnecessary at the time. Because SW tags KASAN uses separate tag storage,
update the code to only reset the tags when HW tags KASAN is enabled.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/If303d8a709438d3ff5af5fd85706505830f52e0c
Reported-by: "Kuan-Ying Lee (李冠穎)" <Kuan-Ying.Lee@mediatek.com>
Cc: <stable@vger.kernel.org> # 6.1
Fixes: 20794545c146 ("arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"")
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20230215050911.1433132-1-pcc@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Use kmap_local instead of kmap_atomic
- Change request callback to take void pointer
- Print FIPS status in /proc/crypto (when enabled)
Algorithms:
- Add rfc4106/gcm support on arm64
- Add ARIA AVX2/512 support on x86
Drivers:
- Add TRNG driver for StarFive SoC
- Delete ux500/hash driver (subsumed by stm32/hash)
- Add zlib support in qat
- Add RSA support in aspeed"
* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
crypto: x86/aria-avx - Do not use avx2 instructions
crypto: aspeed - Fix modular aspeed-acry
crypto: hisilicon/qm - fix coding style issues
crypto: hisilicon/qm - update comments to match function
crypto: hisilicon/qm - change function names
crypto: hisilicon/qm - use min() instead of min_t()
crypto: hisilicon/qm - remove some unused defines
crypto: proc - Print fips status
crypto: crypto4xx - Call dma_unmap_page when done
crypto: octeontx2 - Fix objects shared between several modules
crypto: nx - Fix sparse warnings
crypto: ecc - Silence sparse warning
tls: Pass rec instead of aead_req into tls_encrypt_done
crypto: api - Remove completion function scaffolding
tls: Remove completion function scaffolding
tipc: Remove completion function scaffolding
net: ipv6: Remove completion function scaffolding
net: ipv4: Remove completion function scaffolding
net: macsec: Remove completion function scaffolding
dm: Remove completion function scaffolding
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit
architectural register (ZT0, for the look-up table feature) that
Linux needs to save/restore
- Include TPIDR2 in the signal context and add the corresponding
kselftests
- Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI
support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG
(ARM CMN) at probe time
- Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64
- Permit EFI boot with MMU and caches on. Instead of cleaning the
entire loaded kernel image to the PoC and disabling the MMU and
caches before branching to the kernel bare metal entry point, leave
the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of
all of system RAM to populate the initial page tables
- Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64
kernel (the arm32 kernel only defines the values)
- Harden the arm64 shadow call stack pointer handling: stash the shadow
stack pointer in the task struct on interrupt, load it directly from
this structure
- Signal handling cleanups to remove redundant validation of size
information and avoid reading the same data from userspace twice
- Refactor the hwcap macros to make use of the automatically generated
ID registers. It should make new hwcaps writing less error prone
- Further arm64 sysreg conversion and some fixes
- arm64 kselftest fixes and improvements
- Pointer authentication cleanups: don't sign leaf functions, unify
asm-arch manipulation
- Pseudo-NMI code generation optimisations
- Minor fixes for SME and TPIDR2 handling
- Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable,
replace strtobool() to kstrtobool() in the cpufeature.c code, apply
dynamic shadow call stack in two passes, intercept pfn changes in
set_pte_at() without the required break-before-make sequence, attempt
to dump all instructions on unhandled kernel faults
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits)
arm64: fix .idmap.text assertion for large kernels
kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests
kselftest/arm64: Copy whole EXTRA context
arm64: kprobes: Drop ID map text from kprobes blacklist
perf: arm_spe: Print the version of SPE detected
perf: arm_spe: Add support for SPEv1.2 inverted event filtering
perf: Add perf_event_attr::config3
arm64/sme: Fix __finalise_el2 SMEver check
drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable
arm64/signal: Only read new data when parsing the ZT context
arm64/signal: Only read new data when parsing the ZA context
arm64/signal: Only read new data when parsing the SVE context
arm64/signal: Avoid rereading context frame sizes
arm64/signal: Make interface for restore_fpsimd_context() consistent
arm64/signal: Remove redundant size validation from parse_user_sigframe()
arm64/signal: Don't redundantly verify FPSIMD magic
arm64/cpufeature: Use helper macros to specify hwcaps
arm64/cpufeature: Always use symbolic name for feature value in hwcaps
arm64/sysreg: Initial unsigned annotations for ID registers
arm64/sysreg: Initial annotation of signed ID registers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"Beyond some specific LoadPin, UBSAN, and fortify features, there are
other fixes scattered around in various subsystems where maintainers
were okay with me carrying them in my tree or were non-responsive but
the patches were reviewed by others:
- Replace 0-length and 1-element arrays with flexible arrays in
various subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees
Cook)
- randstruct: Disable Clang 15 support (Eric Biggers)
- GCC plugins: Drop -std=gnu++11 flag (Sam James)
- strpbrk(): Refactor to use strchr() (Andy Shevchenko)
- LoadPin LSM: Allow root filesystem switching when non-enforcing
- fortify: Use dynamic object size hints when available
- ext4: Fix CFI function prototype mismatch
- Nouveau: Fix DP buffer size arguments
- hisilicon: Wipe entire crypto DMA pool on error
- coda: Fully allocate sig_inputArgs
- UBSAN: Improve arm64 trap code reporting
- copy_struct_from_user(): Add minimum bounds check on kernel buffer
size"
* tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randstruct: disable Clang 15 support
uaccess: Add minimum bounds check on kernel buffer size
arm64: Support Clang UBSAN trap codes for better reporting
coda: Avoid partial allocation of sig_inputArgs
gcc-plugins: drop -std=gnu++11 to fix GCC 13 build
lib/string: Use strchr() in strpbrk()
crypto: hisilicon: Wipe entire pool on error
net/i40e: Replace 0-length array with flexible array
io_uring: Replace 0-length array with flexible array
ext4: Fix function prototype mismatch for ext4_feat_ktype
i915/gvt: Replace one-element array with flexible-array member
drm/nouveau/disp: Fix nvif_outp_acquire_dp() argument size
LoadPin: Allow filesystem switch when not enforcing
LoadPin: Move pin reporting cleanly out of locking
LoadPin: Refactor sysctl initialization
LoadPin: Refactor read-only check into a helper
ARM: ixp4xx: Replace 0-length arrays with flexible arrays
fortify: Use __builtin_dynamic_object_size() when available
rxrpc: replace zero-lenth array with DECLARE_FLEX_ARRAY() helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
|
|
Pull SoC DT updates from Arnd Bergmann:
"About a quarter of the changes are for 32-bit arm, mostly filling in
device support for existing machines and adding minor cleanups, mostly
for Qualcomm and Samsung based machines.
Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
Rockchips that have been around for a while but were lacking kernel
support so far: RV1126 is a Vision SoC with an NPU and is used in the
Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design
for TV boxes and so far only comes with a dts for its refernece
design.
The other 32-bit boards that were added are two ASpeed AST2600 based
BMC boards, the Microchip sam9x60_curiosity development board (Armv5
based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards
for i.MX53 and i.MX6ULL.
On the RISC-V side, there are fewer patches, but a total of ten new
single-board computers based on variations of the Allwinner D1/T113
chip, plus one more board based on Microchip Polarfire.
As usual, arm64 has by far the most changes here, with over 700
non-merge changesets, among them over 400 alone for Qualcomm. The
newly added SoCs this time are all recent high-end embedded SoCs for
various markets, each on comes with support for its reference board:
- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
- Qualcomm QDU1000/QRU1000 5G RAN platform
- Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
- TI J784S4 for industrial and automotive applications
In total, there are 46 new arm64 machines:
- Reference platforms for each of the five new SoCs
- Three Amlogic based development boards
- Six embedded machines based on NXP i.MX8MM and i.MX8MP
- The Mediatek mt7986a based Banana Pi R3 router
- Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115
(Snapdragon 662) and SM8250 (Snapdragon 865)
- Two LTE dongles, also based on MSM8916
- Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
SDM450 and SDM632
- Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
- Nine development boards based on Rockchips RK3588, RK3568, RK3566
and RK3328.
- Five development machines based on TI K3 (AM642/AM654/AM68/AM69)
The cleanup of dtc warnings continues across all platforms, adding to
the total number of changes"
* tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits)
dt-bindings: riscv: correct starfive visionfive 2 compatibles
ARM: dts: socfpga: Add enclustra PE1 devicetree
dt-bindings: altera: Add enclustra mercury PE1
arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
arm64: dts: qcom: pmk8350: Use the correct PON compatible
arm64: dts: qcom: sc8280xp-x13s: Enable external display
arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
arm64: dts: qcom: sm8350-hdk: enable GPU
arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
arm64: dts: qcom: sm8350: finish reordering nodes
arm64: dts: qcom: sm8350: move more nodes to correct place
arm64: dts: qcom: sm8350: reorder device nodes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfigs updates from Arnd Bergmann:
"As usual, this contains all the patches to enable options for newly
added device drivers in the 32-bit and 64-bit defconfig files.
I have sorted the files according to the changes to Kconfig files,
to make it easier to check what has changed compared to the 'make
savedefconfig' output.
The most notable change this time is a series from Mark Brown to add
a 'virtconfig' target for arm64, which is for the moment the same as
the 'defconfig' target but disables all the top-level SoC specific
options in order to have a smaller and faster kernel build"
* tag 'soc-defconfig-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (39 commits)
arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
arm64: defconfig: Enable DisplayPort on SC8280XP laptops
arm64: configs: Add virtconfig
kbuild: Provide a version of merge_into_defconfig without override warnings
scripts: merge_config: Add option to suppress warning on overrides
ARM: reorder defconfig files
arm64: reorder defconfig
arm64: defconfig: enable Qualcomm SDAM nvmem driver
arm64: defconfig: enable SM8450 DISPCC clock driver
ARM: defconfig: Add IOSCHED_BFQ to the default configs
ARM: configs: multi_v7: enable NVMEM driver for STM32
ARM: Add wpcm450_defconfig for Nuvoton WPCM450
arm64: defconfig: Enable DMA_RESTRICTED_POOL
arm64: defconfig: Enable missing configs for mt8192-asurada
riscv: defconfig: Enable the Allwinner D1 platform and drivers
ARM: imx_v6_v7_defconfig: Don't enable PROVE_LOCKING
ARM: multi_v7_defconfig: Add GXP Fan and SPI support
ARM: add multi_v7_lpae_defconfig
kbuild: Add config fragment merge functionality
ARM: multi_v7_defconfig: Add options to support TQMLS102xA series
...
|
|
Pull ARM SoC updates from Arnd Bergmann:
"The majority of the changes are for the OMAP2 platform, mostly
removing some dead code that got left behind from previous cleanups.
Aside from that, there are very minor updates and correctness fixes
for Zynq, i.MX, Samsung, Broadcom, AT91, ep93xx, and OMAP1"
* tag 'arm-soc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
dt-bindings: soc: samsung: exynos-pmu: allow phys as child
ARM: imx: mach-imx6ul: add imx6ulz support
ARM: imx: Call ida_simple_remove() for ida_simple_get
arm64: drop redundant "ARMv8" from Kconfig option title
ARM: ep93xx: Convert to use descriptors for GPIO LEDs
ARM: s3c: fix s3c64xx_set_timer_source prototype
ARM: OMAP2+: Fix spelling typos in comment
ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/machine.h>
ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/pinmux.h>
ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init()
ARM: BCM63xx: remove useless goto statement
ARM: omap2: make functions static
ARM: omap2: remove unused omap2_pm_init
ARM: omap2: remove unused declarations
ARM: omap2: remove unused functions
ARM: omap2: smartreflex: remove on_init control
ARM: omap2: remove APLL control
ARM: omap2: simplify clock2xxx header
ARM: omap2: remove unused omap_hwmod_reset.c
ARM: omap2: remove unused headers
...
|
|
When building a kernel with many debug options enabled (which happens in
test configurations use by myself and syzbot), the kernel can become
large enough that portions of .text can be more than 128M away from
.idmap.text (which is placed inside the .rodata section). Where idmap
code branches into .text, the linker will place veneers in the
.idmap.text section to make those branches possible.
Unfortunately, as Ard reports, GNU LD has bseen observed to add 4K of
padding when adding such veneers, e.g.
| .idmap.text 0xffffffc01e48e5c0 0x32c arch/arm64/mm/proc.o
| 0xffffffc01e48e5c0 idmap_cpu_replace_ttbr1
| 0xffffffc01e48e600 idmap_kpti_install_ng_mappings
| 0xffffffc01e48e800 __cpu_setup
| *fill* 0xffffffc01e48e8ec 0x4
| .idmap.text.stub
| 0xffffffc01e48e8f0 0x18 linker stubs
| 0xffffffc01e48f8f0 __idmap_text_end = .
| 0xffffffc01e48f000 . = ALIGN (0x1000)
| *fill* 0xffffffc01e48f8f0 0x710
| 0xffffffc01e490000 idmap_pg_dir = .
This makes the __idmap_text_start .. __idmap_text_end region bigger than
the 4K we require it to fit within, and triggers an assertion in arm64's
vmlinux.lds.S, which breaks the build:
| LD .tmp_vmlinux.kallsyms1
| aarch64-linux-gnu-ld: ID map text too big or misaligned
| make[1]: *** [scripts/Makefile.vmlinux:35: vmlinux] Error 1
| make: *** [Makefile:1264: vmlinux] Error 2
Avoid this by using an `ADRP+ADD+BLR` sequence for branches out of
.idmap.text, which avoids the need for veneers. These branches are only
executed once per boot, and only when the MMU is on, so there should be
no noticeable performance penalty in replacing `BL` with `ADRP+ADD+BLR`.
At the same time, remove the "x" and "w" attributes when placing code in
.idmap.text, as these are not necessary, and this will prevent the
linker from assuming that it is safe to place PLTs into .idmap.text,
causing it to warn if and when there are out-of-range branches within
.idmap.text, e.g.
| LD .tmp_vmlinux.kallsyms1
| arch/arm64/kernel/head.o: in function `primary_entry':
| (.idmap.text+0x1c): relocation truncated to fit: R_AARCH64_CALL26 against symbol `dcache_clean_poc' defined in .text section in arch/arm64/mm/cache.o
| arch/arm64/kernel/head.o: in function `init_el2':
| (.idmap.text+0x88): relocation truncated to fit: R_AARCH64_CALL26 against symbol `dcache_clean_poc' defined in .text section in arch/arm64/mm/cache.o
| make[1]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1
| make: *** [Makefile:1252: vmlinux] Error 2
Thus, if future changes add out-of-range branches in .idmap.text, it
should be easy enough to identify those from the resulting linker
errors.
Reported-by: syzbot+f8ac312e31226e23302b@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-arm-kernel/00000000000028ea4105f4e2ef54@google.com/
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20230220162317.1581208-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.3
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
|
|
Running a rt-kernel base on 6.2.0-rc3-rt1 on an Ampere Altra outputs
the following:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9, name: kworker/u320:0
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
3 locks held by kworker/u320:0/9:
#0: ffff3fff8c27d128 ((wq_completion)efi_rts_wq){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41)
#1: ffff80000861bdd0 ((work_completion)(&efi_rts_work.work)){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41)
#2: ffffdf7e1ed3e460 (efi_rt_lock){+.+.}-{3:3}, at: efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101)
Preemption disabled at:
efi_virtmap_load (./arch/arm64/include/asm/mmu_context.h:248)
CPU: 0 PID: 9 Comm: kworker/u320:0 Tainted: G W 6.2.0-rc3-rt1
Hardware name: WIWYNN Mt.Jade Server System B81.03001.0005/Mt.Jade Motherboard, BIOS 1.08.20220218 (SCP: 1.08.20220218) 2022/02/18
Workqueue: efi_rts_wq efi_call_rts
Call trace:
dump_backtrace (arch/arm64/kernel/stacktrace.c:158)
show_stack (arch/arm64/kernel/stacktrace.c:165)
dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
dump_stack (lib/dump_stack.c:114)
__might_resched (kernel/sched/core.c:10134)
rt_spin_lock (kernel/locking/rtmutex.c:1769 (discriminator 4))
efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101)
[...]
This seems to come from commit ff7a167961d1 ("arm64: efi: Execute
runtime services from a dedicated stack") which adds a spinlock. This
spinlock is taken through:
efi_call_rts()
\-efi_call_virt()
\-efi_call_virt_pointer()
\-arch_efi_call_virt_setup()
Make 'efi_rt_lock' a raw_spinlock to avoid being preempted.
[ardb: The EFI runtime services are called with a different set of
translation tables, and are permitted to use the SIMD registers.
The context switch code preserves/restores neither, and so EFI
calls must be made with preemption disabled, rather than only
disabling migration.]
Fixes: ff7a167961d1 ("arm64: efi: Execute runtime services from a dedicated stack")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 regression fix from Will Deacon:
"Apologies for the _extremely_ late pull request here, but we had a
'perf' (i.e. CPU PMU) regression on the Apple M1 reported on Wednesday
[1] which was introduced by bd2756811766 ("perf: Rewrite core context
handling") during the merge window.
Mark and I looked into this and noticed an additional problem caused
by the same patch, where the 'CHAIN' event (used to combine two
adjacent 32-bit counters into a single 64-bit counter) was not being
filtered correctly. Mark posted a series on Thursday [2] which
addresses both of these regressions and I queued it the same day.
The changes are small, self-contained and have been confirmed to fix
the original regression.
Summary:
- Fix 'perf' regression for non-standard CPU PMU hardware (i.e. Apple
M1)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: perf: reject CHAIN events at creation time
arm_pmu: fix event CPU filtering
|
|
Some of the devlink bits were tricky, but I think I got it right.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently it's possible for a user to open CHAIN events arbitrarily,
which we previously tried to rule out in commit:
ca2b497253ad01c8 ("arm64: perf: Reject stand-alone CHAIN events for PMUv3")
Which allowed the events to be opened, but prevented them from being
scheduled by by using an arm_pmu::filter_match hook to reject the
relevant events.
The CHAIN event filtering in the arm_pmu::filter_match hook was silently
removed in commit:
bd27568117664b8b ("perf: Rewrite core context handling")
As a result, it's now possible for users to open CHAIN events, and for
these to be installed arbitrarily.
Fix this by rejecting CHAIN events at creation time. This avoids the
creation of events which will never count, and doesn't require using the
dynamic filtering.
Attempting to open a CHAIN event (0x1e) will now be rejected:
| # ./perf stat -e armv8_pmuv3/config=0x1e/ ls
| perf
|
| Performance counter stats for 'ls':
|
| <not supported> armv8_pmuv3/config=0x1e/
|
| 0.002197470 seconds time elapsed
|
| 0.000000000 seconds user
| 0.002294000 seconds sys
Other events (e.g. CPU_CYCLES / 0x11) will open as usual:
| # ./perf stat -e armv8_pmuv3/config=0x11/ ls
| perf
|
| Performance counter stats for 'ls':
|
| 2538761 armv8_pmuv3/config=0x11/
|
| 0.002227330 seconds time elapsed
|
| 0.002369000 seconds user
| 0.000000000 seconds sys
Fixes: bd2756811766 ("perf: Rewrite core context handling")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230216141240.3833272-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Janne reports that perf has been broken on Apple M1 as of commit:
bd27568117664b8b ("perf: Rewrite core context handling")
That commit replaced the pmu::filter_match() callback with
pmu::filter(), whose return value has the opposite polarity, with true
implying events should be ignored rather than scheduled. While an
attempt was made to update the logic in armv8pmu_filter() and
armpmu_filter() accordingly, the return value remains inverted in a
couple of cases:
* If the arm_pmu does not have an arm_pmu::filter() callback,
armpmu_filter() will always return whether the CPU is supported rather
than whether the CPU is not supported.
As a result, the perf core will not schedule events on supported CPUs,
resulting in a loss of events. Additionally, the perf core will
attempt to schedule events on unsupported CPUs, but this will be
rejected by armpmu_add(), which may result in a loss of events from
other PMUs on those unsupported CPUs.
* If the arm_pmu does have an arm_pmu::filter() callback, and
armpmu_filter() is called on a CPU which is not supported by the
arm_pmu, armpmu_filter() will return false rather than true.
As a result, the perf core will attempt to schedule events on
unsupported CPUs, but this will be rejected by armpmu_add(), which may
result in a loss of events from other PMUs on those unsupported CPUs.
This means a loss of events can be seen with any arm_pmu driver, but
with the ARMv8 PMUv3 driver (which is the only arm_pmu driver with an
arm_pmu::filter() callback) the event loss will be more limited and may
go unnoticed, which is how this issue evaded testing so far.
Fix the CPU filtering by performing this consistently in
armpmu_filter(), and remove the redundant arm_pmu::filter() callback and
armv8pmu_filter() implementation.
Commit bd2756811766 also silently removed the CHAIN event filtering from
armv8pmu_filter(), which will be addressed by a separate patch without
using the filter callback.
Fixes: bd2756811766 ("perf: Rewrite core context handling")
Reported-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/asahi/20230215-arm_pmu_m1_regression-v1-1-f5a266577c8d@jannau.net/
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Asahi Lina <lina@asahilina.net>
Cc: Eric Curtin <ecurtin@redhat.com>
Tested-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20230216141240.3833272-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
KVM/riscv changes for 6.3
- Fix wrong usage of PGDIR_SIZE to check page sizes
- Fix privilege mode setting in kvm_riscv_vcpu_trap_redirect()
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Few more Qualcomm ARM64 defconfig updates for v6.3
This enables the drivers needed to support USB Type-C based external
display on the SC8280XP laptops. It also enables a couple of core
drivers for the Qualcomm SA8775P platform.
* tag 'qcom-arm64-defconfig-for-6.3-3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
arm64: defconfig: Enable DisplayPort on SC8280XP laptops
Link: https://lore.kernel.org/r/20230215051757.1166709-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Last set of Qualcomm ARM64 DTS updates for v6.3
This introduces additional DisplayPort controllers and pmic_glink on
SC8280XP (8cx Gen3), which provides support for USB Type-C-based
displays on the the Lenovo ThinkPad X13s and the compute reference
device. The pmic_glink also provides battery and power supply status.
Interrupt-parents are corrected across the SC8280XP PMICs, to allow
non-Linux OSs to properly handle interrupts in the various blocks
therein.
It cleans up the SM8350 base dtsi and introduces GPU support on this
platform, as well as enable this for the Hardware Development Kit (HDK).
It enables i2c busses on the Fairphone FP4
Lastly it aligns glink node names with bindings across a few platforms,
and corrects the compatible for the PON block in the pmk8350 PMIC.
* tag 'qcom-arm64-for-6.3-3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
arm64: dts: qcom: pmk8350: Use the correct PON compatible
arm64: dts: qcom: sc8280xp-x13s: Enable external display
arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
arm64: dts: qcom: sm8350-hdk: enable GPU
arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
arm64: dts: qcom: sm8350: finish reordering nodes
arm64: dts: qcom: sm8350: move more nodes to correct place
arm64: dts: qcom: sm8350: reorder device nodes
Link: https://lore.kernel.org/r/20230215051530.1165953-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We need the USB fixes in here for testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
* kvm-arm64/nv-prefix:
: Preamble to NV support, courtesy of Marc Zyngier.
:
: This brings in a set of prerequisite patches for supporting nested
: virtualization in KVM/arm64. Of course, there is a long way to go until
: NV is actually enabled in KVM.
:
: - Introduce cpucap / vCPU feature flag to pivot the NV code on
:
: - Add support for EL2 vCPU register state
:
: - Basic nested exception handling
:
: - Hide unsupported features from the ID registers for NV-capable VMs
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
arm64: Add ARM64_HAS_NESTED_VIRT cpufeature
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/misc:
: Miscellaneous updates
:
: - Convert CPACR_EL1_TTA to the new, generated system register
: definitions.
:
: - Serialize toggling CPACR_EL1.SMEN to avoid unexpected exceptions when
: accessing SVCR in the host.
:
: - Avoid quiescing the guest if a vCPU accesses its own redistributor's
: SGIs/PPIs, eliminating the need to IPI. Largely an optimization for
: nested virtualization, as the L1 accesses the affected registers
: rather often.
:
: - Conversion to kstrtobool()
:
: - Common definition of INVALID_GPA across architectures
:
: - Enable CONFIG_USERFAULTFD for CI runs of KVM selftests
KVM: arm64: Fix non-kerneldoc comments
KVM: selftests: Enable USERFAULTFD
KVM: selftests: Remove redundant setbuf()
arm64/sysreg: clean up some inconsistent indenting
KVM: MMU: Make the definition of 'INVALID_GPA' common
KVM: arm64: vgic-v3: Use kstrtobool() instead of strtobool()
KVM: arm64: vgic-v3: Limit IPI-ing when accessing GICR_{C,S}ACTIVER0
KVM: arm64: Synchronize SMEN on vcpu schedule out
KVM: arm64: Kill CPACR_EL1_TTA definition
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/apple-vgic-mi:
: VGIC maintenance interrupt support for the AIC, courtesy of Marc Zyngier.
:
: The AIC provides a non-maskable VGIC maintenance interrupt, which until
: now was not supported by KVM. This series (1) allows the registration of
: a non-maskable maintenance interrupt and (2) wires in support for this
: with the AIC driver.
irqchip/apple-aic: Correctly map the vgic maintenance interrupt
irqchip/apple-aic: Register vgic maintenance interrupt with KVM
KVM: arm64: vgic: Allow registration of a non-maskable maintenance interrupt
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/psci-relay-fixes:
: Fixes for CPU on/resume with pKVM, courtesy Quentin Perret.
:
: A consequence of deprivileging the host is that pKVM relays PSCI calls
: on behalf of the host. pKVM's CPU initialization failed to fully
: initialize the CPU's EL2 state, which notably led to unexpected SVE
: traps resulting in a hyp panic.
:
: The issue is addressed by reusing parts of __finalise_el2 to restore CPU
: state in the PSCI relay.
KVM: arm64: Finalise EL2 state from pKVM PSCI relay
KVM: arm64: Use sanitized values in __check_override in nVHE
KVM: arm64: Introduce finalise_el2_state macro
KVM: arm64: Provide sanitized SYS_ID_AA64SMFR0_EL1 to nVHE
|
|
* kvm-arm64/nv-timer-improvements:
: Timer emulation improvements, courtesy of Marc Zyngier.
:
: - Avoid re-arming an hrtimer for a guest timer that is already pending
:
: - Only reload the affected timer context when emulating a sysreg access
: instead of both the virtual/physical timers.
KVM: arm64: timers: Don't BUG() on unhandled timer trap
KVM: arm64: Reduce overhead of trapped timer sysreg accesses
KVM: arm64: Don't arm a hrtimer for an already pending timer
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/parallel-access-faults:
: Parallel stage-2 access fault handling
:
: The parallel faults changes that went in to 6.2 covered most stage-2
: aborts, with the exception of stage-2 access faults. Building on top of
: the new infrastructure, this series adds support for handling access
: faults (i.e. updating the access flag) in parallel.
:
: This is expected to provide a performance uplift for cores that do not
: implement FEAT_HAFDBS, such as those from the fruit company.
KVM: arm64: Condition HW AF updates on config option
KVM: arm64: Handle access faults behind the read lock
KVM: arm64: Don't serialize if the access flag isn't set
KVM: arm64: Return EAGAIN for invalid PTE in attr walker
KVM: arm64: Ignore EAGAIN for walks outside of a fault
KVM: arm64: Use KVM's pte type/helpers in handle_access_fault()
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/virtual-cache-geometry:
: Virtualized cache geometry for KVM guests, courtesy of Akihiko Odaki.
:
: KVM/arm64 has always exposed the host cache geometry directly to the
: guest, even though non-secure software should never perform CMOs by
: Set/Way. This was slightly wrong, as the cache geometry was derived from
: the PE on which the vCPU thread was running and not a sanitized value.
:
: All together this leads to issues migrating VMs on heterogeneous
: systems, as the cache geometry saved/restored could be inconsistent.
:
: KVM/arm64 now presents 1 level of cache with 1 set and 1 way. The cache
: geometry is entirely controlled by userspace, such that migrations from
: older kernels continue to work.
KVM: arm64: Mark some VM-scoped allocations as __GFP_ACCOUNT
KVM: arm64: Normalize cache configuration
KVM: arm64: Mask FEAT_CCIDX
KVM: arm64: Always set HCR_TID2
arm64/cache: Move CLIDR macro definitions
arm64/sysreg: Add CCSIDR2_EL1
arm64/sysreg: Convert CCSIDR_EL1 to automatic generation
arm64: Allow the definition of UNKNOWN system register fields
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Merge the SME2 branch to fix up a rather annoying conflict due to the
EL2 finalization refactor.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Merge the kvm_init() + hardware enable rework to avoid conflicts
with kvmarm.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
qcom,rpmcc bindings expect RPM clock controller to be named generic
"clock-controller":
rpm-glink: rpm-requests: 'qcom,rpmcc' does not match any of the regexes: '^regulators(-[01])?$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-3-krzysztof.kozlowski@linaro.org
|
|
Bindings expect (and most of DTS use) the RPM G-Link node name to be
"rpm-requests".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-2-krzysztof.kozlowski@linaro.org
|
|
Bindings expect (and most of DTS use) the RPM G-Link node name to be
"rpm-requests".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-1-krzysztof.kozlowski@linaro.org
|
|
Enable the pinctrl, GCC clock and interconnect drivers in order to allow
booting SA8775P boards. The drivers need to be built-in for QUPv3 and
subsequently UART console to work.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209103531.469809-1-brgl@bgdev.pl
|
