| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 8678591b47469fe16357234efef9b260317b8be4 upstream.
Commit 3e86e4d74c04 ("kbuild: keep .modinfo section in
vmlinux.unstripped") added .modinfo to ELF_DETAILS while removing it
from COMMON_DISCARDS, as it was needed in vmlinux.unstripped and
ELF_DETAILS was present in all architecture specific vmlinux linker
scripts. While this shuffle is fine for vmlinux, ELF_DETAILS and
COMMON_DISCARDS may be used by other linker scripts, such as the s390
and x86 compressed boot images, which may not expect to have a .modinfo
section. In certain circumstances, this could result in a bootloader
failing to load the compressed kernel [1].
Commit ddc6cbef3ef1 ("s390/boot/vmlinux.lds.S: Ensure bzImage ends with
SecureBoot trailer") recently addressed this for the s390 bzImage but
the same bug remains for arm, parisc, and x86. The presence of .modinfo
in the x86 bzImage was the root cause of the issue worked around with
commit d50f21091358 ("kbuild: align modinfo section for Secureboot
Authenticode EDK2 compat"). misc.c in arch/x86/boot/compressed includes
lib/decompress_unzstd.c, which in turn includes lib/xxhash.c and its
MODULE_LICENSE / MODULE_DESCRIPTION macros due to the STATIC definition.
Split .modinfo out from ELF_DETAILS into its own macro and handle it in
all vmlinux linker scripts. Discard .modinfo in the places where it was
previously being discarded from being in COMMON_DISCARDS, as it has
never been necessary in those uses.
Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c04 ("kbuild: keep .modinfo section in vmlinux.unstripped")
Reported-by: Ed W <lists@wildgooses.com>
Closes: https://lore.kernel.org/587f25e0-a80e-46a5-9f01-87cb40cfa377@wildgooses.com/ [1]
Tested-by: Ed W <lists@wildgooses.com> # x86_64
Link: https://patch.msgid.link/20260225-separate-modinfo-from-elf-details-v1-1-387ced6baf4b@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a85b3131225a8c8143ba2ae29c0eef8c1f9117f upstream.
When FEAT_LPA2 is enabled, bits 8-9 of the PTE replace the
shareability attribute with bits 50-51 of the output address. The
_PAGE_GCS{,_RO} definitions include the PTE_SHARED bits as 0b11 (this
matches the other _PAGE_* definitions) but using this macro directly
leads to the following panic when enabling GCS on a system/model with
LPA2:
Unable to handle kernel paging request at virtual address fffff1ffc32d8008
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 52-bit VAs, pgdp=0000000060f4d000
[fffff1ffc32d8008] pgd=100000006184b003, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
CPU: 0 UID: 0 PID: 513 Comm: gcs_write_fault Tainted: G M 7.0.0-rc1 #1 PREEMPT
Tainted: [M]=MACHINE_CHECK
Hardware name: QEMU QEMU Virtual Machine, BIOS 2025.02-8+deb13u1 11/08/2025
pstate: 03402005 (nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : zap_huge_pmd+0x168/0x468
lr : zap_huge_pmd+0x2c/0x468
sp : ffff800080beb660
x29: ffff800080beb660 x28: fff00000c2058180 x27: ffff800080beb898
x26: fff00000c2058180 x25: ffff800080beb820 x24: 00c800010b600f41
x23: ffffc1ffc30af1a8 x22: fff00000c2058180 x21: 0000ffff8dc00000
x20: fff00000c2bc6370 x19: ffff800080beb898 x18: ffff800080bebb60
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000007
x14: 000000000000000a x13: 0000aaaacbbbffff x12: 0000000000000000
x11: 0000ffff8ddfffff x10: 00000000000001fe x9 : 0000ffff8ddfffff
x8 : 0000ffff8de00000 x7 : 0000ffff8da00000 x6 : fff00000c2bc6370
x5 : 0000ffff8da00000 x4 : 000000010b600000 x3 : ffffc1ffc0000000
x2 : fff00000c2058180 x1 : fffff1ffc32d8000 x0 : 000000c00010b600
Call trace:
zap_huge_pmd+0x168/0x468 (P)
unmap_page_range+0xd70/0x1560
unmap_single_vma+0x48/0x80
unmap_vmas+0x90/0x180
unmap_region+0x88/0xe4
vms_complete_munmap_vmas+0xf8/0x1e0
do_vmi_align_munmap+0x158/0x180
do_vmi_munmap+0xac/0x160
__vm_munmap+0xb0/0x138
vm_munmap+0x14/0x20
gcs_free+0x70/0x80
mm_release+0x1c/0xc8
exit_mm_release+0x28/0x38
do_exit+0x190/0x8ec
do_group_exit+0x34/0x90
get_signal+0x794/0x858
arch_do_signal_or_restart+0x11c/0x3e0
exit_to_user_mode_loop+0x10c/0x17c
el0_da+0x8c/0x9c
el0t_64_sync_handler+0xd0/0xf0
el0t_64_sync+0x198/0x19c
Code: aa1603e2 d34cfc00 cb813001 8b011861 (f9400420)
Similarly to how the kernel handles protection_map[], use a
gcs_page_prot variable to store the protection bits and clear PTE_SHARED
if LPA2 is enabled.
Also remove the unused PAGE_GCS{,_RO} macros.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 6497b66ba694 ("arm64/mm: Map pages for guarded control stack")
Reported-by: Emanuele Rocca <emanuele.rocca@arm.com>
Cc: stable@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 46c56b737161060dfa468f25ae699749047902a2 ]
The pcie bus address should be mapped 1:1 to the cpu side MMIO address, so
that there is no same address allocated from normal system memory. Otherwise
it's broken if the same address assigned to the EP for DMA purpose.Fix it to
sync with the vendor BSP.
Fixes: 0acf4fa7f187 ("arm64: dts: rockchip: add PCIe3 support for rk3588")
Fixes: 8d81b77f4c49 ("arm64: dts: rockchip: add rk3588 PCIe2 support")
Cc: stable@vger.kernel.org
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/1767600929-195341-2-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f63ea193a404481f080ca2958f73e9f364682db9 ]
The pcie bus address should be mapped 1:1 to the cpu side MMIO address, so
that there is no same address allocated from normal system memory. Otherwise
it's broken if the same address assigned to the EP for DMA purpose.Fix it to
sync with the vendor BSP.
Fixes: 568a67e742df ("arm64: dts: rockchip: Fix rk356x PCIe register and range mappings")
Fixes: 66b51ea7d70f ("arm64: dts: rockchip: Add rk3568 PCIe2x1 controller")
Cc: stable@vger.kernel.org
Cc: Andrew Powers-Holmes <aholmes@omnom.net>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/1767600929-195341-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef06fd16d48704eac868441d98d4ef083d8f3d07 ]
struct bpf_plt contains a u64 target field. Currently, the BPF JIT
allocator requests an alignment of 4 bytes (sizeof(u32)) for the JIT
buffer.
Because the base address of the JIT buffer can be 4-byte aligned (e.g.,
ending in 0x4 or 0xc), the relative padding logic in build_plt() fails
to ensure that target lands on an 8-byte boundary.
This leads to two issues:
1. UBSAN reports misaligned-access warnings when dereferencing the
structure.
2. More critically, target is updated concurrently via WRITE_ONCE() in
bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64,
64-bit loads/stores are only guaranteed to be single-copy atomic if
they are 64-bit aligned. A misaligned target risks a torn read,
causing the JIT to jump to a corrupted address.
Fix this by increasing the allocation alignment requirement to 8 bytes
(sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base of
the JIT buffer to an 8-byte boundary, allowing the relative padding math
in build_plt() to correctly align the target field.
Fixes: b2ad54e1533e ("bpf, arm64: Implement bpf_arch_text_poke() for arm64")
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20260226075525.233321-1-tabba@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8f098037139b294050053123ab2bc0f819d08932 ]
The only caller of ioremap_prot() outside of the generic ioremap()
implementation is generic_access_phys(), which passes a 'pgprot_t' value
determined from the user mapping of the target 'pfn' being accessed by
the kernel. On arm64, the 'pgprot_t' contains all of the non-address
bits from the pte, including the permission controls, and so we end up
returning a new user mapping from ioremap_prot() which faults when
accessed from the kernel on systems with PAN:
| Unable to handle kernel read from unreadable memory at virtual address ffff80008ea89000
| ...
| Call trace:
| __memcpy_fromio+0x80/0xf8
| generic_access_phys+0x20c/0x2b8
| __access_remote_vm+0x46c/0x5b8
| access_remote_vm+0x18/0x30
| environ_read+0x238/0x3e8
| vfs_read+0xe4/0x2b0
| ksys_read+0xcc/0x178
| __arm64_sys_read+0x4c/0x68
Extract only the memory type from the user 'pgprot_t' in ioremap_prot()
and assert that we're being passed a user mapping, to protect us against
any changes in future that may require additional handling. To avoid
falsely flagging users of ioremap(), provide our own ioremap() macro
which simply wraps __ioremap_prot().
Cc: Zeng Heng <zengheng4@huawei.com>
Cc: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 893dea9ccd08 ("arm64: Add HAVE_IOREMAP_PROT support")
Reported-by: Jinjiang Tu <tujinjiang@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f6bf47ab32e0863df50f5501d207dcdddb7fc507 ]
Rename our ioremap_prot() implementation to __ioremap_prot() and convert
all arch-internal callers over to the new function.
ioremap_prot() remains as a #define to __ioremap_prot() for
generic_access_phys() and will be subsequently extended to handle user
permissions in 'prot'.
Cc: Zeng Heng <zengheng4@huawei.com>
Cc: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: 8f098037139b ("arm64: io: Extract user memory type in ioremap_prot()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7e7c2cf0024d89443a7af52e09e47b1fe634ab17 ]
In protected mode, the hypervisor maintains a separate instance of
the `kvm` structure for each VM. For non-protected VMs, this structure is
initialized from the host's `kvm` state.
Currently, `pkvm_init_features_from_host()` copies the
`KVM_ARCH_FLAG_ID_REGS_INITIALIZED` flag from the host without the
underlying `id_regs` data being initialized. This results in the
hypervisor seeing the flag as set while the ID registers remain zeroed.
Consequently, `kvm_has_feat()` checks at EL2 fail (return 0) for
non-protected VMs. This breaks logic that relies on feature detection,
such as `ctxt_has_tcrx()` for TCR2_EL1 support. As a result, certain
system registers (e.g., TCR2_EL1, PIR_EL1, POR_EL1) are not
saved/restored during the world switch, which could lead to state
corruption.
Fix this by explicitly copying the ID registers from the host `kvm` to
the hypervisor `kvm` for non-protected VMs during initialization, since
we trust the host with its non-protected guests' features. Also ensure
`KVM_ARCH_FLAG_ID_REGS_INITIALIZED` is cleared initially in
`pkvm_init_features_from_host` so that `vm_copy_id_regs` can properly
initialize them and set the flag once done.
Fixes: 41d6028e28bd ("KVM: arm64: Convert the SVE guest vcpu flag to a vm flag")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260213143815.1732675-4-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f66857bafd4f151c5cc6856e47be2e12c1721e43 ]
When CONFIG_ARM64_POE is disabled, KVM does not save/restore POR_EL1.
However, ID_AA64MMFR3_EL1 sanitisation currently exposes the feature to
guests whenever the hardware supports it, ignoring the host kernel
configuration.
If a guest detects this feature and attempts to use it, the host will
fail to context-switch POR_EL1, potentially leading to state corruption.
Fix this by masking ID_AA64MMFR3_EL1.S1POE in the sanitised system
registers, preventing KVM from advertising the feature when the host
does not support it (i.e. system_supports_poe() is false).
Fixes: 70ed7238297f ("KVM: arm64: Sanitise ID_AA64MMFR3_EL1")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260213143815.1732675-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e5cb94ba5f96d691d8885175d4696d6ae6bc5ec9 ]
Ben reports that when running with CONFIG_DEBUG_PREEMPT, using
__arch_counter_get_cntvct_stable() results in well deserves warnings,
as we access a per-CPU variable without preemption disabled.
Fix the issue by disabling preemption on reading the counter. We can
probably do a lot better by not disabling preemption on systems that
do not require horrible workarounds to return a valid counter value,
but this plugs the issue for the time being.
Fixes: 29cc0f3aa7c6 ("arm64: Force the use of CNTVCT_EL0 in __delay()")
Reported-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/aZw3EGs4rbQvbAzV@e134344.arm.com
Tested-by: Ben Horgan <ben.horgan@arm.com>
Tested-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 29cc0f3aa7c64d3b3cb9d94c0a0984ba6717bf72 ]
Quentin forwards a report from Hyesoo Yu, describing an interesting
problem with the use of WFxT in __delay() when a vcpu is loaded and
that KVM is *not* in VHE mode (either nVHE or hVHE).
In this case, CNTVOFF_EL2 is set to a non-zero value to reflect the
state of the guest virtual counter. At the same time, __delay() is
using get_cycles() to read the counter value, which is indirected to
reading CNTPCT_EL0.
The core of the issue is that WFxT is using the *virtual* counter,
while the kernel is using the physical counter, and that the offset
introduces a really bad discrepancy between the two.
Fix this by forcing the use of CNTVCT_EL0, making __delay() consistent
irrespective of the value of CNTVOFF_EL2.
Reported-by: Hyesoo Yu <hyesoo.yu@samsung.com>
Reported-by: Quentin Perret <qperret@google.com>
Reviewed-by: Quentin Perret <qperret@google.com>
Fixes: 7d26b0516a0d ("arm64: Use WFxT for __delay() when possible")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/ktosachvft2cgqd5qkukn275ugmhy6xrhxur4zqpdxlfr3qh5h@o3zrfnsq63od
Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bb0c99e08ab9aa6d04b40cb63c72db9950d51749 ]
The implementation of __READ_ONCE() under CONFIG_LTO=y incorrectly
qualified the fallback "once" access for types larger than 8 bytes,
which are not atomic but should still happen "once" and suppress common
compiler optimizations.
The cast `volatile typeof(__x)` applied the volatile qualifier to the
pointer type itself rather than the pointee. This created a volatile
pointer to a non-volatile type, which violated __READ_ONCE() semantics.
Fix this by casting to `volatile typeof(*__x) *`.
With a defconfig + LTO + debug options build, we see the following
functions to be affected:
xen_manage_runstate_time (884 -> 944 bytes)
xen_steal_clock (248 -> 340 bytes)
^-- use __READ_ONCE() to load vcpu_runstate_info structs
Fixes: e35123d83ee3 ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y")
Cc: stable@vger.kernel.org
Reviewed-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Tested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1f3b950492db411e6c30ee0076b61ef2694c100a ]
If a process wrote to POR_EL0 and then crashed before a context switch
happened, the coredump would contain an incorrect value for POR_EL0.
The value read in poe_get() would be a stale value left in thread.por_el0. Fix
this by reading the value from the system register, if the target thread is the
current thread.
This matches what gcs/fpsimd do.
Fixes: 175198199262 ("arm64/ptrace: add support for FEAT_POE")
Reported-by: David Spickett <david.spickett@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 79a3286e61829fc43abdd6e3beb31b24930c7af6 ]
Rockchip RK3576 UFS controller uses a dedicated pin to reset the connected
UFS device, which can operate either in a hardware controlled mode or as a
GPIO pin.
Power-on default is GPIO mode, but the boot ROM reconfigures it to a
hardware controlled mode if it uses UFS to load the next boot stage.
Given that existing bindings (and rk3576.dtsi) expect a GPIO-controlled
device reset, request the required pin config explicitly.
The pin is requested with pull-down enabled, which is in line with the
SoC power-on default and helps ensure that the attached UFS chip stays
in reset until the driver takes over the control of the respective
GPIO line.
This doesn't appear to affect Linux, but it does affect U-boot:
Before:
=> md.l 0x2604b398
2604b398: 00000011 00000000 00000000 00000000 ................
< ... snip ... >
=> ufs init
ufshcd-rockchip ufshc@2a2d0000: [RX, TX]: gear=[3, 3], lane[2, 2], pwr[FASTAUTO_MODE, FASTAUTO_MODE], rate = 2
=> md.l 0x2604b398
2604b398: 00000011 00000000 00000000 00000000 ................
After:
=> md.l 0x2604b398
2604b398: 00000011 00000000 00000000 00000000 ................
< ... snip ...>
=> ufs init
ufshcd-rockchip ufshc@2a2d0000: [RX, TX]: gear=[3, 3], lane[2, 2], pwr[FASTAUTO_MODE, FASTAUTO_MODE], rate = 2
=> md.l 0x2604b398
2604b398: 00000010 00000000 00000000 00000000 ................
(0x2604b398 is the respective pin mux register, with its BIT0 driving the
mode of UFS_RST: unset = GPIO, set = hardware controlled UFS_RST)
This helps ensure that GPIO-driven device reset actually fires when the
system requests it, not when whatever black box magic inside the UFSHC
decides to reset the flash chip.
Cc: stable@vger.kernel.org
Fixes: c75e5e010fef ("scsi: arm64: dts: rockchip: Add UFS support for RK3576 SoC")
Reported-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://patch.msgid.link/20260121-ufs-rst-v3-1-35839bcb4ca7@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2eb80a2eee18762a33aa770d742d64fe47852c7e ]
We had extended the sysreg masking infrastructure to more general
registers, instead of restricting it to VNCR-backed registers, since
commit a0162020095e ("KVM: arm64: Extend masking facility to arbitrary
registers"). Fix kvm_get_sysreg_res0() to reflect this fact.
Note that we're sure that we only deal with FGT registers in
kvm_get_sysreg_res0(), the
if (sr < __VNCR_START__)
is actually a never false, which should probably be removed later.
Fixes: 69c19e047dfe ("KVM: arm64: Add TCR2_EL2 to the sysreg arrays")
Signed-off-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Link: https://patch.msgid.link/20260121101631.41037-1-zenghui.yu@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b18247f9dab735c9c2d63823d28edc9011e7a1ad ]
Remove the redundant enabling of the hdmi_sound node in the Pinebook Pro
board dts file, because the HDMI output is unused on this device. [1][2]
This change also eliminates the following kernel log warning, which is
caused by the unenabled dependent node of hdmi_sound that ultimately
results in the node's probe failure:
platform hdmi-sound: deferred probe pending: asoc-simple-card: parse error
[1] https://files.pine64.org/doc/PinebookPro/pinebookpro_v2.1_mainboard_schematic.pdf
[2] https://files.pine64.org/doc/PinebookPro/pinebookpro_schematic_v21a_20220419.pdf
Cc: stable@vger.kernel.org
Fixes: 5a65505a69884 ("arm64: dts: rockchip: Add initial support for Pinebook Pro")
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://patch.msgid.link/20260116151253.9223-1-jerrysteve1101@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7226664bf952c4cfddccd74b154a7d994608d153 ]
When runtime suspend is enabled, the associated power domain is powered
off, which resets the registers, including the power control bit. As a result,
the card loses power during runtime suspend. The card should still be able
to process I/O with the help of mmc_blk_mq_rw_recovery(), which is suboptimal.
To address this issue, we must use vmmc-supply with a GPIO based method to
maintain power to the card. Also, add cd-gpios method to make hot-plug work
correctly during idle periods.
Fixes: f135a1a07352 ("arm64: dts: rockchip: Add rk3576 evb1 board")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/1768524932-163929-5-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3e4e729325131fe6f7473a0673f7d8cdde53f5a0 ]
Add the display controller and DPTX phy power-domains to the framebuffer
node to keep the framebuffer and display out working after device probing
finished.
The OS has more control about the display pipeline used for the HDMI
output on M2 based devices. The HDMI output is driven by an integrated
DisplayPort to HDMI converter (Parade PS190). The DPTX phy is now
controlled by the OS and no longer by firmware running on the display
co-processor. This allows using the second display controller on the
second USB type-c port or tunneling 2 DisplayPort connections over
USB4/Thunderbolt.
The m1n1 bootloader uses the second display controller to drive the HDMI
output. Adjust for this difference compared to the notebooks as well.
Fixes: 2d5ce3fbef32 ("arm64: dts: apple: t8112: Initial t8112 (M2) device trees")
Cc: stable@vger.kernel.org
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20260108-apple-dt-pmgr-fixes-v1-1-cfdce629c0a8@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f22c81bebf8bda6e54dc132df0ed54f6bf8756f9 ]
The arm64 kernel doesn't boot with annotated branches
(PROFILE_ANNOTATED_BRANCHES) enabled and CONFIG_DEBUG_VIRTUAL together.
Bisecting it, I found that disabling branch profiling in arch/arm64/mm
solved the problem. Narrowing down a bit further, I found that
physaddr.c is the file that needs to have branch profiling disabled to
get the machine to boot.
I suspect that it might invoke some ftrace helper very early in the boot
process and ftrace is still not enabled(!?).
Rather than playing whack-a-mole with individual files, disable branch
profiling for the entire arch/arm64 tree, similar to what x86 already
does in arch/x86/Kbuild.
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15dd20dda979ebab72f6df97845828e78d63ab91 ]
Commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
introduced the kexec_buf->random field to enable random placement of
kexec_buf.
However, this field was never properly initialized for kexec images
that do not need to be placed randomly, leading to the following UBSAN
warning:
[ +0.364528] ------------[ cut here ]------------
[ +0.000019] UBSAN: invalid-load in ./include/linux/kexec.h:210:12
[ +0.000131] load of value 2 is not a valid value for type 'bool' (aka '_Bool')
[ +0.000003] CPU: 4 UID: 0 PID: 927 Comm: kexec Not tainted 6.18.0-rc7+ #3 PREEMPT(full)
[ +0.000002] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
[ +0.000000] Call trace:
[ +0.000001] show_stack+0x24/0x40 (C)
[ +0.000006] __dump_stack+0x28/0x48
[ +0.000002] dump_stack_lvl+0x7c/0xb0
[ +0.000002] dump_stack+0x18/0x34
[ +0.000001] ubsan_epilogue+0x10/0x50
[ +0.000002] __ubsan_handle_load_invalid_value+0xc8/0xd0
[ +0.000003] locate_mem_hole_callback+0x28c/0x2a0
[ +0.000003] kexec_locate_mem_hole+0xf4/0x2f0
[ +0.000001] kexec_add_buffer+0xa8/0x178
[ +0.000002] image_load+0xf0/0x258
[ +0.000001] __arm64_sys_kexec_file_load+0x510/0x718
[ +0.000002] invoke_syscall+0x68/0xe8
[ +0.000001] el0_svc_common+0xb0/0xf8
[ +0.000002] do_el0_svc+0x28/0x48
[ +0.000001] el0_svc+0x40/0xe8
[ +0.000002] el0t_64_sync_handler+0x84/0x140
[ +0.000002] el0t_64_sync+0x1bc/0x1c0
To address this, initialise kexec_buf->random field properly.
Fixes: bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
Suggested-by: Breno Leitao <leitao@debian.org>
Cc: stable@vger.kernel.org
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/all/oninomspajhxp4omtdapxnckxydbk2nzmrix7rggmpukpnzadw@c67o7njgdgm3/ [1]
Link: https://lore.kernel.org/all/20250825180531.94bfb86a26a43127c0a1296f@linux-foundation.org/ [2]
Link: https://lkml.kernel.org/r/20250826-akpm-v1-1-3c831f0e3799@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1c6192ec9c4ab8bdb7b2cf8763b7ef7e38671ffe ]
Bindings always required "qcom,num-ees" and "num-channels" properties,
as reported by dtbs_check:
sm8750-mtp.dtb: dma-controller@1dc4000 (qcom,bam-v1.7.4): 'anyOf' conditional failed, one must be fixed:
'qcom,powered-remotely' is a required property
'num-channels' is a required property
'qcom,num-ees' is a required property
'clocks' is a required property
'clock-names' is a required property
However since commit 5068b5254812 ("dmaengine: qcom: bam_dma: Fix DT
error handling for num-channels/ees") missing properties are actually
fatal and BAM does not probe:
bam-dma-engine 1dc4000.dma-controller: num-channels unspecified in dt
bam-dma-engine 1dc4000.dma-controller: probe with driver bam-dma-engine failed with error -22
Fixes: eeb0f3e4ea67 ("arm64: dts: qcom: sm8750: Add QCrypto nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251229115734.205744-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0907cab01ff9746ecf08592edd9bd85d2636be58 ]
The DP PHYs on X1E80100 need the ref clock which is provided by the
TCSR CC.
The current X Elite devices supported upstream work fine without this
clock, because the boot firmware leaves this clock enabled. But we should
not rely on that. Also, even though this change breaks the ABI, it is
needed in order to make the driver disables this clock along with the
other ones, for a proper bring-down of the entire PHY.
So lets attach it to each of the DP PHYs in order to do that.
Cc: stable@vger.kernel.org # v6.9
Fixes: 1940c25eaa63 ("arm64: dts: qcom: x1e80100: Add display nodes")
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20251224-phy-qcom-edp-add-missing-refclk-v5-3-3f45d349b5ac@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0c1d1591f898d54eaa4c8f2a1535ab21bf4e42e4 ]
If the OS does not support recovering the state left by the
bootloader it needs a way to reset display hardware, so that it can
start from a clean state. Add a reference to the relevant reset.
It fixes display init issue appeared in Linux v6.17: without reset
device boots into black screen and you need to turn display off/on
to "fix" it. Also sometimes it can boot into solid blue color
with these messages in kernel log:
hw recovery is not complete for ctl:2
[drm:dpu_encoder_phys_vid_prepare_for_kickoff:569] [dpu error]enc33
intf1 ctl 2 reset failure: -22
[drm:dpu_encoder_frame_done_timeout:2727] [dpu error]enc33 frame
done timeout
Fixes: 0e789b491ba0 ("pmdomain: core: Leave powered-on genpds on until sync_state")
Cc: stable@vger.kernel.org # 6.17
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251116-sdm660-mdss-reset-v2-3-6219bec0a97f@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit de86dbc0fb00bd3773db4b05d9f5926f0faa2244 ]
The power switch used to power the SD card interface might have
more than 2ms turn-on time, increase the startup delay to 20ms to
prevent failures.
Fixes: 87f95ea316ac ("arm64: dts: ti: Add Toradex Verdin AM62P")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20251209084126.33282-1-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 729a2e8e9ac47099a967567389cc9d73ef4194ca ]
gcc-16 warns about an instance that older compilers did not:
arch/arm64/mm/hugetlbpage.c: In function 'huge_pte_clear':
arch/arm64/mm/hugetlbpage.c:369:57: error: parameter 'addr' set but not used [-Werror=unused-but-set-parameter=]
The issue here is that __pte_clear() does not actually use its second
argument, but when CONFIG_ARM64_CONTPTE is enabled it still gets
updated.
Replace the macro with an inline function to let the compiler see
the argument getting passed down.
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dfa93788dd8b2f9c59adf45ecf592082b1847b7b ]
The USB2 port on Smaug is configured for OTG operation but lacked the
required 'usb-role-switch' property, leading to a failed probe and a
non-functioning USB port. Add the property along with setting the default
role to host.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c197179990124f991fca220d97fac56779a02c6d ]
This reverts commit 06d22ed6b6635b17551f386b50bb5aaff9b75fbe.
OP-TEE logic in U-Boot automatically injects a reserved-memory
node along with optee firmware node to kernel device tree.
The injection logic is dependent on that there is no manually
defined optee node. Having the node in zynqmp.dtsi effectively
breaks OP-TEE's insertion of the reserved-memory node, causing
memory access violations during runtime.
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20251125-revert-zynqmp-optee-v1-1-d2ce4c0fcaf6@vaisala.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e3baa5d4b361276efeb87b20d8beced451a7dbd5 ]
The TSV110 processor is vulnerable to the Spectre-BHB (Branch History
Buffer) attack, which can be exploited to leak information through
branch prediction side channels. This commit adds the MIDR of TSV110
to the list for software mitigation.
Signed-off-by: Jinqian Yang <yangjinqian1@huawei.com>
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cd6735896d0343942cf3dafb48ce32eb79341990 ]
bpf_address_lookup() has been used only in kallsyms_lookup_buildid(). It
was supposed to set @modname and @modbuildid when the symbol was in a
module.
But it always just cleared @modname because BPF symbols were never in a
module. And it did not clear @modbuildid because the pointer was not
passed.
The wrapper is no longer needed. Both @modname and @modbuildid are now
always initialized to NULL in kallsyms_lookup_buildid().
Remove the wrapper and rename __bpf_address_lookup() to
bpf_address_lookup() because this variant is used everywhere.
[akpm@linux-foundation.org: fix loongarch]
Link: https://lkml.kernel.org/r/20251128135920.217303-6-pmladek@suse.com
Fixes: 9294523e3768 ("module: add printk formats to add module build ID to stacktraces")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 78c13dac18cf0e6f6cbc6ea85d4f967e6cca9562 ]
Describe the GPU register regions, with the former existing but not
being used much if at all on this silicon, and the latter containing
various debugging levers generally related to dumping the state of
the IP upon a crash.
Fixes: 11750af256f8 ("arm64: dts: qcom: sm6115: Add GPU nodes")
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Closes: https://lore.kernel.org/linux-arm-msm/8a64f70b-8034-45e7-86a3-0015cf357132@oss.qualcomm.com/T/#m404f1425c36b61467760f058b696b8910340a063
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251229-topic-6115_2290_gpu_dbgc-v1-3-4a24d196389c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0fdcc948929a6d673bd0f90631dd6e42090c3dbd ]
Describe the GPU register regions, with the former existing but not
being used much if at all on this silicon, and the latter containing
various debugging levers generally related to dumping the state of
the IP upon a crash.
Fixes: 4faeef52c8e6 ("arm64: dts: qcom: qcm2290: Add GPU nodes")
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Closes: https://lore.kernel.org/linux-arm-msm/8a64f70b-8034-45e7-86a3-0015cf357132@oss.qualcomm.com/T/#m404f1425c36b61467760f058b696b8910340a063
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251229-topic-6115_2290_gpu_dbgc-v1-2-4a24d196389c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dda4bdd325326dd67ae4401f4f3d35b9cf781e3f ]
QUP devices are currently marked with opp-shared in their OPP table,
causing the kernel to treat them as part of a shared OPP domain. This
leads to the qcom_geni_serial driver failing to probe with error
-EBUSY (-16).
Remove the opp-shared property to ensure the OPP framework treats the
QUP OPP table as device-specific, allowing the serial driver to probe
successfully
Fixes: f6746dc9e379 ("arm64: dts: qcom: qcs615: Add QUPv3 configuration")
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251111170350.525832-1-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b38dd256e11a4c8bd5a893e11fc42d493939c907 ]
Unlike the phone SoCs this was copied from, x1e has a 40-bit physical bus.
The upper address space is used to support more than 32GB of memory.
This fixes issues when DMA buffers are allocated outside the 36-bit range.
Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251127212943.24480-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c303e89f7f17c29981d09f8beaaf60937ae8b1f2 ]
Specify power supply for the second chain / antenna output of the
onboard WiFi chip.
Fixes: 3f72e2d3e682 ("arm64: dts: qcom: Add Dragonboard 845c")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-8-0386204328be@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8bfb696ccdc5bcfad7a45b84c2c8a36757070e19 ]
On SDM845 SPI uses hardware-provided chip select, while specifying
cs-gpio makes the driver request GPIO pin, which on DB845c conflicts
with the normal host controllers pinctrl entry.
Drop the cs-gpios property to restore SPI functionality.
Fixes: cb29e7106d4e ("arm64: dts: qcom: db845c: Add support for MCP2517FD")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-7-0386204328be@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c5dc4812f6bf397b82290c540085e9ec98b47b30 ]
Follow commit 9c92d36b0b1e ("arm64: dts: qcom: qrb2210-rb1: Fix UART3
wakeup IRQ storm") and apply the similar fix to the RB2 platform.
Having RX / TX pins as pull up and wakup interrupt as high-level
triggered generates an interrupt storm when trying to suspend the
device. Avoid the storm by using the falling edge trigger (as all other
platforms do).
Fixes: cab60b166575 ("arm64: dts: qcom: qrb4210-rb2: Enable bluetooth")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-6-0386204328be@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c941feaa363f1573a501452391ddf513394c84b ]
The amlogic MMC driver operate with the assumption that MMC clock
is configured to provide 24MHz. It uses this path for low
rates such as 400kHz.
Assign the clock to make sure it is properly configured
Fixes: 8a6b3ca2d361 ("arm64: dts: meson: g12a: add SDIO controller")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260114-amlogic-mmc-clocks-followup-v1-6-a999fafbe0aa@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be2ff5fdb0e83e32d4ec4e68a69875cec0d14621 ]
The amlogic MMC driver operate with the assumption that MMC clock
is configured to provide 24MHz. It uses this path for low
rates such as 400kHz.
Assign the clocks to make sure they are properly configured
Fixes: 4759fd87b928 ("arm64: dts: meson: g12a: add mmc nodes")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260114-amlogic-mmc-clocks-followup-v1-5-a999fafbe0aa@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 406706559046eebc09a31e8ae5e78620bfd746fe ]
The amlogic MMC driver operate with the assumption that MMC clock
is configured to provide 24MHz. It uses this path for low
rates such as 400kHz.
Assign the clocks to make sure they are properly configured
Fixes: 50662499f911 ("ARM64: dts: meson-gx: Use correct mmc clock source 0")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260114-amlogic-mmc-clocks-followup-v1-4-a999fafbe0aa@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 13d3fe2318ef6e46d6fcfe13bc373827fdf2aeac ]
The amlogic MMC driver operate with the assumption that MMC clock
is configured to provide 24MHz. It uses this path for low
rates such as 400kHz.
Assign the clocks to make sure they are properly configured
Fixes: 221cf34bac54 ("ARM64: dts: meson-axg: enable the eMMC controller")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260114-amlogic-mmc-clocks-followup-v1-3-a999fafbe0aa@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 69330fd2368371c4eb47d60ace6bca09763d24a0 ]
The amlogic MMC driver operate with the assumption that MMC clock
is configured to provide 24MHz. It uses this path for low
rates such as 400kHz.
Assign the clocks to make sure they are properly configured
Fixes: 520b792e8317 ("arm64: dts: amlogic: add some device nodes for C3")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260114-amlogic-mmc-clocks-followup-v1-1-a999fafbe0aa@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
instances for j784s4
[ Upstream commit 61acc4428a7f52e0a13e226ba76f2ce2ca66c065 ]
Each A72 core has one watchdog instance associated with it. Since j742s2
has 4 A72 cores, the common file should not define 8 watchdog instances.
Refactor the last 4 extra watchdogs from the common file to j784s4
specific file, as j784s4 has 8 A72 cores and thus hardware description
requires 8 watchdog instances.
Fixes: 9cc161a4509c ("arm64: dts: ti: Refactor J784s4 SoC files to a common file")
Signed-off-by: Abhash Kumar Jha <a-kumar2@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://patch.msgid.link/20260112085113.3476193-3-a-kumar2@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 24c9d5fb8bbf5e8c9e6fc2beffeb80ac2da83de4 ]
The device tree nodes should be ordered by unit addresses in ascending
order.
Correct the order by moving the c71_3 DSP node at the end as it has a
higher unit address.
Signed-off-by: Abhash Kumar Jha <a-kumar2@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://patch.msgid.link/20260112085113.3476193-2-a-kumar2@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Stable-dep-of: 61acc4428a7f ("arm64: dts: ti: k3-j784s4-j742s2-main-common.dtsi: Refactor watchdog instances for j784s4")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3a115d42922cffc91b303992eadf220111d66c31 ]
MMC A and C are mis-represented as having their "clkin0" input connected to
xtal while it is actually connected to the MMC clock, probably in an
attempt to provide 24MHz to the device on this input.
Fix this and assign the clock to 24MHz to actually provide the required
rate.
Fixes: 3ab9d54b5d84 ("arm64: dts: amlogic: enable some device nodes for S4")
Tested-by: Nick Xie <nick@khadas.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260114-amlogic-s4-mmc-fixup-v3-2-a4d3e136b3f2@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 86124a8becb43eed3103f2459399daee8af2c99d ]
The amlogic MMC driver operate with the assumption that MMC clock
is configured to provide 24MHz. It uses this path for low
rates such as 400kHz.
This assumption did hold true until but it now, but it is apparently
not the case with s4. The clock has been reported to provide 1GHz
instead. This is most likely due to how the bootloader is using the MMC
clock on this platform.
Regardless of why the MMC clock rate is 1GHz, if the MMC driver expects
24MHz, the clock should be properly assigned, so assign it.
Reported-by: Nick Xie <nick@khadas.com>
Closes: https://lore.kernel.org/linux-amlogic/20260113011931.40424-1-nick@khadas.com/
Fixes: 3ab9d54b5d84 ("arm64: dts: amlogic: enable some device nodes for S4")
Tested-by: Nick Xie <nick@khadas.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260114-amlogic-s4-mmc-fixup-v3-1-a4d3e136b3f2@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b1fc81a986c9b8089db31e21a372cc8b6514e900 ]
Rename "piins-bt-wakeup" to "pins-bt-wakeup" to fix a dtbs_check
warning happening due to this typo.
Fixes: 055ef10ccdd4 ("arm64: dts: mt8183: Add jacuzzi pico/pico6 board")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a1b1ee0348f889ec262482e16e9ff670617db7b0 ]
Switch SD0 write-protect detection to a GPIO on the RZ/T2H and RZ/N2H
EVKs. Both boards use a full-size SD card slot on the SD0 channel with
a dedicated WP pin.
The RZ/T2H and RZ/N2H SoCs use of_data_rcar_gen3, which sets
MMC_CAP2_NO_WRITE_PROTECT and causes the core to ignore the WP signal
unless a wp-gpios property is provided. Describe the WP pin as a GPIO
to allow the MMC core to evaluate the write-protect status correctly.
Fixes: d065453e5ee0 ("arm64: dts: renesas: rzt2h-rzn2h-evk: Enable SD card slot")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260106131319.643084-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7db5fbe508deedec6c183d5056cf3c504c027f40 ]
Trivial change, Analog Devices vendor prefix is "adi", but there is
a valid "ad" vendor prefix of another company, this may explain why
the issue hasn't been discovered by the automatic tests.
A problem of not described compatible value is out of this change scope.
Fixes: c636eeb751f6 ("arm64: dts: qcom: msm8994-octagon: Add AD7147 and APDS9930 sensors")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251226003923.3341904-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 44cfd102ce28e749a07bb0f1668cf932077b1175 ]
SW_LCD_EN is defined twice.
Fixes: 9e95446b0cf93a91 ("arm64: dts: renesas: r9a09g047e57-smarc: Add gpio keys")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/1f93558c62f4461f50935644ec831a7d2cb52630.1764089463.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3af51501e2b8c87564b5cda43b0e5c316cf54717 ]
It seems the USB combo SS1 and SS2 ref clocks have another gate, unlike
the SS0. These gates are part of the TCSR clock controller.
At least on Dell XPS 13 (9345), if the ref clock provided by the TCSR
clock controller for SS1 PHY is disabled on the clk_disable_unused late
initcall, the PHY fails to initialize. It doesn't happen on the SS0 PHY
and the SS2 is not used on this device.
This doesn't seem to be a problem on CRD though. It might be that the
RPMh has a vote for it from some other consumer and does not actually
disable it when ther kernel drops its vote.
Either way, these TCSR provided clocks seem to be the correct ones for
the SS1 and SS2, so use them instead.
Fixes: 4af46b7bd66f ("arm64: dts: qcom: x1e80100: Add USB nodes")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251103-dts-qcom-x1e80100-fix-combo-ref-clks-v1-1-f395ec3cb7e8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
