summaryrefslogtreecommitdiff
path: root/arch/arm64/kvm
AgeCommit message (Collapse)AuthorFilesLines
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds1-1/+1
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14Merge tag 'arm64-upstream' of ↵Linus Torvalds3-2/+23
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - struct thread_info moved off-stack (also touching include/linux/thread_info.h and include/linux/restart_block.h) - cpus_have_cap() reworked to avoid __builtin_constant_p() for static key use (also touching drivers/irqchip/irq-gic-v3.c) - uprobes support (currently only for native 64-bit tasks) - Emulation of kernel Privileged Access Never (PAN) using TTBR0_EL1 switching to a reserved page table - CPU capacity information passing via DT or sysfs (used by the scheduler) - support for systems without FP/SIMD (IOW, kernel avoids touching these registers; there is no soft-float ABI, nor kernel emulation for AArch64 FP/SIMD) - handling of hardware watchpoint with unaligned addresses, varied lengths and offsets from base - use of the page table contiguous hint for kernel mappings - hugetlb fixes for sizes involving the contiguous hint - remove unnecessary I-cache invalidation in flush_cache_range() - CNTHCTL_EL2 access fix for CPUs with VHE support (ARMv8.1) - boot-time checks for writable+executable kernel mappings - simplify asm/opcodes.h and avoid including the 32-bit ARM counterpart and make the arm64 kernel headers self-consistent (Xen headers patch merged separately) - Workaround for broken .inst support in certain binutils versions * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (60 commits) arm64: Disable PAN on uaccess_enable() arm64: Work around broken .inst when defective gas is detected arm64: Add detection code for broken .inst support in binutils arm64: Remove reference to asm/opcodes.h arm64: Get rid of asm/opcodes.h arm64: smp: Prevent raw_smp_processor_id() recursion arm64: head.S: Fix CNTHCTL_EL2 access on VHE system arm64: Remove I-cache invalidation from flush_cache_range() arm64: Enable HIBERNATION in defconfig arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN arm64: xen: Enable user access before a privcmd hvc call arm64: Handle faults caused by inadvertent user access with PAN enabled arm64: Disable TTBR0_EL1 during normal kernel execution arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1 arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro arm64: Factor out PAN enabling/disabling into separate uaccess_* macros arm64: Update the synchronous external abort fault description selftests: arm64: add test for unaligned/inexact watchpoint handling arm64: Allow hw watchpoint of length 3,5,6 and 7 arm64: hw_breakpoint: Handle inexact watchpoint addresses ...
2016-12-14Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-11/+7
Pull KVM updates from Paolo Bonzini: "Small release, the most interesting stuff is x86 nested virt improvements. x86: - userspace can now hide nested VMX features from guests - nested VMX can now run Hyper-V in a guest - support for AVX512_4VNNIW and AVX512_FMAPS in KVM - infrastructure support for virtual Intel GPUs. PPC: - support for KVM guests on POWER9 - improved support for interrupt polling - optimizations and cleanups. s390: - two small optimizations, more stuff is in flight and will be in 4.11. ARM: - support for the GICv3 ITS on 32bit platforms" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (94 commits) arm64: KVM: pmu: Reset PMSELR_EL0.SEL to a sane value before entering the guest KVM: arm/arm64: timer: Check for properly initialized timer on init KVM: arm/arm64: vgic-v2: Limit ITARGETSR bits to number of VCPUs KVM: x86: Handle the kthread worker using the new API KVM: nVMX: invvpid handling improvements KVM: nVMX: check host CR3 on vmentry and vmexit KVM: nVMX: introduce nested_vmx_load_cr3 and call it on vmentry KVM: nVMX: propagate errors from prepare_vmcs02 KVM: nVMX: fix CR3 load if L2 uses PAE paging and EPT KVM: nVMX: load GUEST_EFER after GUEST_CR0 during emulated VM-entry KVM: nVMX: generate MSR_IA32_CR{0,4}_FIXED1 from guest CPUID KVM: nVMX: fix checks on CR{0,4} during virtual VMX operation KVM: nVMX: support restore of VMX capability MSRs KVM: nVMX: generate non-true VMX MSRs based on true versions KVM: x86: Do not clear RFLAGS.TF when a singlestep trap occurs. KVM: x86: Add kvm_skip_emulated_instruction and use it. KVM: VMX: Move skip_emulated_instruction out of nested_vmx_check_vmcs12 KVM: VMX: Reorder some skip_emulated_instruction calls KVM: x86: Add a return value to kvm_emulate_cpuid KVM: PPC: Book3S: Move prototypes for KVM functions into kvm_ppc.h ...
2016-12-09arm64: KVM: pmu: Reset PMSELR_EL0.SEL to a sane value before entering the guestMarc Zyngier1-1/+7
The ARMv8 architecture allows the cycle counter to be configured by setting PMSELR_EL0.SEL==0x1f and then accessing PMXEVTYPER_EL0, hence accessing PMCCFILTR_EL0. But it disallows the use of PMSELR_EL0.SEL==0x1f to access the cycle counter itself through PMXEVCNTR_EL0. Linux itself doesn't violate this rule, but we may end up with PMSELR_EL0.SEL being set to 0x1f when we enter a guest. If that guest accesses PMXEVCNTR_EL0, the access may UNDEF at EL1, despite the guest not having done anything wrong. In order to avoid this unfortunate course of events (haha!), let's sanitize PMSELR_EL0 on guest entry. This ensures that the guest won't explode unexpectedly. Cc: stable@vger.kernel.org #4.6+ Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-11-18arm64: KVM: pmu: Fix AArch32 cycle counter accessWei Huang1-2/+8
We're missing the handling code for the cycle counter accessed from a 32bit guest, leading to unexpected results. Cc: stable@vger.kernel.org # 4.6+ Signed-off-by: Wei Huang <wei@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-11-16arm64: Support systems without FP/ASIMDSuzuki K Poulose3-2/+23
The arm64 kernel assumes that FP/ASIMD units are always present and accesses the FP/ASIMD specific registers unconditionally. This could cause problems when they are absent. This patch adds the support for kernel handling systems without FP/ASIMD by skipping the register access within the kernel. For kvm, we trap the accesses to FP/ASIMD and inject an undefined instruction exception to the VM. The callers of the exported kernel_neon_begin_partial() should make sure that the FP/ASIMD is supported. Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> [catalin.marinas@arm.com: add comment on the ARM64_HAS_NO_FPSIMD conflict and the new location] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-11-14ARM: KVM: Support vGICv3 ITSVladimir Murzin2-10/+0
This patch allows to build and use vGICv3 ITS in 32-bit mode. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-11-04arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a ↵Marc Zyngier1-0/+15
single CPU Architecturally, TLBs are private to the (physical) CPU they're associated with. But when multiple vcpus from the same VM are being multiplexed on the same CPU, the TLBs are not private to the vcpus (and are actually shared across the VMID). Let's consider the following scenario: - vcpu-0 maps PA to VA - vcpu-1 maps PA' to VA If run on the same physical CPU, vcpu-1 can hit TLB entries generated by vcpu-0 accesses, and access the wrong physical page. The solution to this is to keep a per-VM map of which vcpu ran last on each given physical CPU, and invalidate local TLBs when switching to a different vcpu from the same VM. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-10-06Merge tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds12-609/+239
Pull KVM updates from Radim Krčmář: "All architectures: - move `make kvmconfig` stubs from x86 - use 64 bits for debugfs stats ARM: - Important fixes for not using an in-kernel irqchip - handle SError exceptions and present them to guests if appropriate - proxying of GICV access at EL2 if guest mappings are unsafe - GICv3 on AArch32 on ARMv8 - preparations for GICv3 save/restore, including ABI docs - cleanups and a bit of optimizations MIPS: - A couple of fixes in preparation for supporting MIPS EVA host kernels - MIPS SMP host & TLB invalidation fixes PPC: - Fix the bug which caused guests to falsely report lockups - other minor fixes - a small optimization s390: - Lazy enablement of runtime instrumentation - up to 255 CPUs for nested guests - rework of machine check deliver - cleanups and fixes x86: - IOMMU part of AMD's AVIC for vmexit-less interrupt delivery - Hyper-V TSC page - per-vcpu tsc_offset in debugfs - accelerated INS/OUTS in nVMX - cleanups and fixes" * tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (140 commits) KVM: MIPS: Drop dubious EntryHi optimisation KVM: MIPS: Invalidate TLB by regenerating ASIDs KVM: MIPS: Split kernel/user ASID regeneration KVM: MIPS: Drop other CPU ASIDs on guest MMU changes KVM: arm/arm64: vgic: Don't flush/sync without a working vgic KVM: arm64: Require in-kernel irqchip for PMU support KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register KVM: PPC: Book3S PR: Support 64kB page size on POWER8E and POWER8NVL KVM: PPC: Book3S: Remove duplicate setting of the B field in tlbie KVM: PPC: BookE: Fix a sanity check KVM: PPC: Book3S HV: Take out virtual core piggybacking code KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread ARM: gic-v3: Work around definition of gic_write_bpr1 KVM: nVMX: Fix the NMI IDT-vectoring handling KVM: VMX: Enable MSR-BASED TPR shadow even if APICv is inactive KVM: nVMX: Fix reload apic access page warning kvmconfig: add virtio-gpu to config fragment config: move x86 kvm_guest.config to a common location arm64: KVM: Remove duplicating init code for setting VMID ARM: KVM: Support vgic-v3 ...
2016-10-03Merge tag 'arm64-upstream' of ↵Linus Torvalds3-29/+14
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "It's a bit all over the place this time with no "killer feature" to speak of. Support for mismatched cache line sizes should help people seeing whacky JIT failures on some SoCs, and the big.LITTLE perf updates have been a long time coming, but a lot of the changes here are cleanups. We stray outside arch/arm64 in a few areas: the arch/arm/ arch_timer workaround is acked by Russell, the DT/OF bits are acked by Rob, the arch_timer clocksource changes acked by Marc, CPU hotplug by tglx and jump_label by Peter (all CC'd). Summary: - Support for execute-only page permissions - Support for hibernate and DEBUG_PAGEALLOC - Support for heterogeneous systems with mismatches cache line sizes - Errata workarounds (A53 843419 update and QorIQ A-008585 timer bug) - arm64 PMU perf updates, including cpumasks for heterogeneous systems - Set UTS_MACHINE for building rpm packages - Yet another head.S tidy-up - Some cleanups and refactoring, particularly in the NUMA code - Lots of random, non-critical fixes across the board" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (100 commits) arm64: tlbflush.h: add __tlbi() macro arm64: Kconfig: remove SMP dependence for NUMA arm64: Kconfig: select OF/ACPI_NUMA under NUMA config arm64: fix dump_backtrace/unwind_frame with NULL tsk arm/arm64: arch_timer: Use archdata to indicate vdso suitability arm64: arch_timer: Work around QorIQ Erratum A-008585 arm64: arch_timer: Add device tree binding for A-008585 erratum arm64: Correctly bounds check virt_addr_valid arm64: migrate exception table users off module.h and onto extable.h arm64: pmu: Hoist pmu platform device name arm64: pmu: Probe default hw/cache counters arm64: pmu: add fallback probe table MAINTAINERS: Update ARM PMU PROFILING AND DEBUGGING entry arm64: Improve kprobes test for atomic sequence arm64/kvm: use alternative auto-nop arm64: use alternative auto-nop arm64: alternative: add auto-nop infrastructure arm64: lse: convert lse alternatives NOP padding to use __nops arm64: barriers: introduce nops and __nops macros for NOP sequences arm64: sysreg: replace open-coded mrs_s/msr_s with {read,write}_sysreg_s ...
2016-09-22ARM: KVM: Support vgic-v3Vladimir Murzin1-4/+0
This patch allows to build and use vgic-v3 in 32-bit mode. Unfortunately, it can not be split in several steps without extra stubs to keep patches independent and bisectable. For instance, virt/kvm/arm/vgic/vgic-v3.c uses function from vgic-v3-sr.c, handling access to GICv3 cpu interface from the guest requires vgic_v3.vgic_sre to be already defined. It is how support has been done: * handle SGI requests from the guest * report configured SRE on access to GICv3 cpu interface from the guest * required vgic-v3 macros are provided via uapi.h * static keys are used to select GIC backend * to make vgic-v3 build KVM_ARM_VGIC_V3 guard is removed along with the static inlines Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-22KVM: arm64: vgic-its: Introduce config option to guard ITS specific codeVladimir Murzin1-0/+4
By now ITS code guarded with KVM_ARM_VGIC_V3 config option which was introduced to hide everything specific to vgic-v3 from 32-bit world. We are going to support vgic-v3 in 32-bit world and KVM_ARM_VGIC_V3 will gone, but we don't have support for ITS there yet and we need to continue keeping ITS away. Introduce the new config option to prevent ITS code being build in 32-bit mode when support for vgic-v3 is done. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-22arm64: KVM: Move vgic-v3 save/restore to virt/kvm/arm/hypVladimir Murzin2-329/+1
So we can reuse the code under arch/arm Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-22arm64: KVM: Move GIC accessors to arch_gicv3.hVladimir Murzin1-13/+0
Since we are going to share vgic-v3 save/restore code with ARM keep arch specific accessors separately. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-22arm64: KVM: Use static keys for selecting the GIC backendVladimir Murzin1-10/+11
Currently GIC backend is selected via alternative framework and this is fine. We are going to introduce vgic-v3 to 32-bit world and there we don't have patching framework in hand, so we can either check support for GICv3 every time we need to choose which backend to use or try to optimise it by using static keys. The later looks quite promising because we can share logic involved in selecting GIC backend between architectures if both uses static keys. This patch moves arm64 from alternative to static keys framework for selecting GIC backend. For that we embed static key into vgic_global and enable the key during vgic initialisation based on what has already been exposed by the host GIC driver. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-12arm64/kvm: use alternative auto-nopMark Rutland1-5/+1
Make use of the new alternative_if and alternative_else_nop_endif and get rid of our open-coded NOP sleds, making the code simpler to read. Note that for __kvm_call_hyp the branch to __vhe_hyp_call has been moved out of the alternative sequence, and in the default case there will be four additional NOPs executed. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-09arm64/kvm: use {read,write}_sysreg()Mark Rutland2-24/+13
A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these in the arm64 KVM code to make the code shorter and clearer. At the same time, a comment style violation next to a system register access is fixed up in reset_pmcr, and comments describing whether operations are reads or writes are removed as this is now painfully obvious. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-08arm64: KVM: Inject a vSerror if detecting a bad GICV access at EL2Marc Zyngier1-3/+15
If, when proxying a GICV access at EL2, we detect that the guest is doing something silly, report an EL1 SError instead ofgnoring the access. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-08arm64: KVM: Handle async aborts delivered while at EL2Marc Zyngier3-3/+61
If EL1 generates an asynchronous abort and then traps into EL2 before the abort has been delivered, we may end-up with the abort firing at the worse possible place: on the host. In order to avoid this, it is necessary to take the abort at EL2, by clearing the PSTATE.A bit. In order to survive this abort, we do it at a point where we're in a known state with respect to the world switch, and handle the resulting exception, overloading the exit code in the process. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-08arm64: KVM: Inject a Virtual SError if it was pendingMarc Zyngier1-0/+20
If we have caught an SError whilst exiting, we've tagged the exit code with the pending information. In that case, let's re-inject the error into the guest, after having adjusted the PC if required. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-08arm64: KVM: Route asynchronous abortsMarc Zyngier1-3/+8
As we now have some basic handling to EL1-triggered aborts, we can actually report them to KVM. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-08arm64: KVM: Add EL1 async abort handlerMarc Zyngier1-0/+3
If we've exited the guest because it has triggered an asynchronous abort from EL1, a possible course of action is to let it know it screwed up by giving it a Virtual Abort to chew on. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-08arm64: KVM: Add Virtual Abort injection helperMarc Zyngier1-0/+12
Now that we're able to context switch the HCR_EL2.VA bit, let's introduce a helper that injects an Abort into a vcpu. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-08arm64: KVM: Preserve pending vSError in world switchMarc Zyngier1-0/+9
The HCR_EL2.VSE bit is used to signal an SError to a guest, and has the peculiar feature of getting cleared when the guest has taken the abort (this is the only bit that behaves as such in this register). This means that if we signal such an abort, we must leave it in the guest context until it disappears from HCR_EL2, and at which point it must be cleared from the context. This is achieved by reading back from HCR_EL2 until the guest takes the fault. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-08arm64: KVM: vgic-v2: Add the GICV emulation infrastructureMarc Zyngier1-0/+32
In order to efficiently perform the GICV access on behalf of the guest, we need to be able to avoid going back all the way to the host kernel. For this, we introduce a new hook in the world switch code, conveniently placed just after populating the fault info. At that point, we only have saved/restored the GP registers, and we can quickly perform all the required checks (data abort, translation fault, valid faulting syndrome, not an external abort, not a PTW). Coming back from the emulation code, we need to skip the emulated instruction. This involves an additional bit of save/restore in order to be able to access the guest's PC (and possibly CPSR if this is a 32bit guest). At this stage, no emulation code is provided. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-08arm64: KVM: Move the AArch32 conditional execution to common codeMarc Zyngier2-149/+2
It would make some sense to share the conditional execution code between 32 and 64bit. In order to achieve this, let's move that code to virt/kvm/arm/aarch32.c. While we're at it, drop a superfluous BUG_ON() that wasn't that useful. Following patches will migrate the 32bit port to that code base. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-08arm64: KVM: Move kvm_vcpu_get_condition out of emulate.cMarc Zyngier1-11/+0
In order to make emulate.c more generic, move the arch-specific manupulation bits out of emulate.c. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-08arm64: KVM: VHE: reset PSTATE.PAN on entry to EL2Vladimir Murzin1-0/+2
SCTLR_EL2.SPAN bit controls what happens with the PSTATE.PAN bit on an exception. However, this bit has no effect on the PSTATE.PAN when HCR_EL2.E2H or HCR_EL2.TGE is unset. Thus when VHE is used and exception taken from a guest PSTATE.PAN bit left unchanged and we continue with a value guest has set. To address that always reset PSTATE.PAN on entry from EL1. Fixes: 1f364c8c48a0 ("arm64: VHE: Add support for running Linux in EL2 mode") Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-08KVM: arm/arm64: Get rid of exported aliases to static functionsChristoffer Dall4-19/+6
When rewriting the assembly code to C code, it was useful to have exported aliases or static functions so that we could keep the existing common C code unmodified and at the same time rewrite arm64 from assembly to C code, and later do the arm part. Now when both are done, we really don't need this level of indirection anymore, and it's time to save a few lines and brain cells. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-08arm64: KVM: Optimize __guest_enter/exit() to save a few instructionsShanker Donthineni2-75/+63
We are doing an unnecessary stack push/pop operation when restoring the guest registers x0-x18 in __guest_enter(). This patch saves the two instructions by using x18 as a base register. No need to store the vcpu context pointer in stack because it is redundant, the same information is available in tpidr_el2. The function __guest_exit() calling convention is slightly modified, caller only pushes the regs x0-x1 to stack instead of regs x0-x3. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-17arm64: KVM: report configured SRE value to 32-bit worldVladimir Murzin1-1/+1
After commit b34f2bc ("arm64: KVM: Make ICC_SRE_EL1 access return the configured SRE value") we report SRE value to 64-bit guest, but 32-bit one still handled as RAZ/WI what leads to funny promise we do not keep: "GICv3: GIC: unable to set SRE (disabled at EL2), panic ahead" Instead, return the actual value of the ICC_SRE_EL1 register that the guest should see. [ Tweaked commit message - Christoffer ] Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-17arm64: KVM: remove misleading comment on pmu statusVladimir Murzin1-8/+0
Comment about how PMU access is handled is not relavant since v4.6 where proper PMU support was added in. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-17arm64: Document workaround for Cortex-A72 erratum #853709Marc Zyngier1-1/+1
We already have a workaround for Cortex-A57 erratum #852523, but Cortex-A72 r0p0 to r0p2 do suffer from the same issue (known as erratum #853709). Let's document the fact that we already handle this. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-04Merge tag 'kvm-arm-for-4.8-take2' of ↵Paolo Bonzini4-7/+27
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM Changes for v4.8 - Take 2 Includes GSI routing support to go along with the new VGIC and a small fix that has been cooking in -next for a while.
2016-08-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds9-122/+45
Pull KVM updates from Paolo Bonzini: - ARM: GICv3 ITS emulation and various fixes. Removal of the old VGIC implementation. - s390: support for trapping software breakpoints, nested virtualization (vSIE), the STHYI opcode, initial extensions for CPU model support. - MIPS: support for MIPS64 hosts (32-bit guests only) and lots of cleanups, preliminary to this and the upcoming support for hardware virtualization extensions. - x86: support for execute-only mappings in nested EPT; reduced vmexit latency for TSC deadline timer (by about 30%) on Intel hosts; support for more than 255 vCPUs. - PPC: bugfixes. * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits) KVM: PPC: Introduce KVM_CAP_PPC_HTM MIPS: Select HAVE_KVM for MIPS64_R{2,6} MIPS: KVM: Reset CP0_PageMask during host TLB flush MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX() MIPS: KVM: Sign extend MFC0/RDHWR results MIPS: KVM: Fix 64-bit big endian dynamic translation MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase MIPS: KVM: Use 64-bit CP0_EBase when appropriate MIPS: KVM: Set CP0_Status.KX on MIPS64 MIPS: KVM: Make entry code MIPS64 friendly MIPS: KVM: Use kmap instead of CKSEG0ADDR() MIPS: KVM: Use virt_to_phys() to get commpage PFN MIPS: Fix definition of KSEGX() for 64-bit KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD kvm: x86: nVMX: maintain internal copy of current VMCS KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures KVM: arm64: vgic-its: Simplify MAPI error handling KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers KVM: arm64: vgic-its: Turn device_id validation into generic ID validation ...
2016-08-01arm64: KVM: Set cpsr before spsr on fault injectionAndrew Jones1-7/+5
We need to set cpsr before determining the spsr bank, as the bank depends on the target exception level of the injection, not the current mode of the vcpu. Normally this is one in the same (EL1), but not when we manage to trap an EL0 fault. It still doesn't really matter for the 64-bit EL0 case though, as vcpu_spsr() unconditionally uses the EL1 bank for that. However the 32-bit EL0 case gets fun, as that path will lead to the BUG() in vcpu_spsr32(). This patch fixes the assignment order and also modifies some white space in order to better group pairs of lines that have strict order. Cc: stable@vger.kernel.org # v4.5 Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-27Merge tag 'arm64-upstream' of ↵Linus Torvalds3-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Kexec support for arm64 - Kprobes support - Expose MIDR_EL1 and REVIDR_EL1 CPU identification registers to sysfs - Trapping of user space cache maintenance operations and emulation in the kernel (CPU errata workaround) - Clean-up of the early page tables creation (kernel linear mapping, EFI run-time maps) to avoid splitting larger blocks (e.g. pmds) into smaller ones (e.g. ptes) - VDSO support for CLOCK_MONOTONIC_RAW in clock_gettime() - ARCH_HAS_KCOV enabled for arm64 - Optimise IP checksum helpers - SWIOTLB optimisation to only allocate/initialise the buffer if the available RAM is beyond the 32-bit mask - Properly handle the "nosmp" command line argument - Fix for the initialisation of the CPU debug state during early boot - vdso-offsets.h build dependency workaround - Build fix when RANDOMIZE_BASE is enabled with MODULES off * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits) arm64: arm: Fix-up the removal of the arm64 regs_query_register_name() prototype arm64: Only select ARM64_MODULE_PLTS if MODULES=y arm64: mm: run pgtable_page_ctor() on non-swapper translation table pages arm64: mm: make create_mapping_late() non-allocating arm64: Honor nosmp kernel command line option arm64: Fix incorrect per-cpu usage for boot CPU arm64: kprobes: Add KASAN instrumentation around stack accesses arm64: kprobes: Cleanup jprobe_return arm64: kprobes: Fix overflow when saving stack arm64: kprobes: WARN if attempting to step with PSTATE.D=1 arm64: debug: remove unused local_dbg_{enable, disable} macros arm64: debug: remove redundant spsr manipulation arm64: debug: unmask PSTATE.D earlier arm64: localise Image objcopy flags arm64: ptrace: remove extra define for CPSR's E bit kprobes: Add arm64 case in kprobe example module arm64: Add kernel return probes support (kretprobes) arm64: Add trampoline code for kretprobes arm64: kprobes instruction simulation support arm64: Treat all entry code as non-kprobe-able ...
2016-07-23arm64: KVM: VHE: Context switch MDSCR_EL1Marc Zyngier1-4/+4
The kprobe enablement work has uncovered that changes made by a guest to MDSCR_EL1 were propagated to the host when VHE was enabled, leading to unexpected exception being delivered. Moving this register to the list of registers that are always context-switched fixes the issue. Fixes: 9c6c35683286 ("arm64: KVM: VHE: Split save/restore of registers shared between guest and host") Cc: stable@vger.kernel.org #4.6 Reported-by: Tirumalesh Chalamarla <Tirumalesh.Chalamarla@cavium.com> Tested-by: Tirumalesh Chalamarla <Tirumalesh.Chalamarla@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-07-22KVM: arm/arm64: Enable irqchip routingEric Auger3-0/+22
This patch adds compilation and link against irqchip. Main motivation behind using irqchip code is to enable MSI routing code. In the future irqchip routing may also be useful when targeting multiple irqchips. Routing standard callbacks now are implemented in vgic-irqfd: - kvm_set_routing_entry - kvm_set_irq - kvm_set_msi They only are supported with new_vgic code. Both HAVE_KVM_IRQCHIP and HAVE_KVM_IRQ_ROUTING are defined. KVM_CAP_IRQ_ROUTING is advertised and KVM_SET_GSI_ROUTING is allowed. So from now on IRQCHIP routing is enabled and a routing table entry must exist for irqfd injection to succeed for a given SPI. This patch builds a default flat irqchip routing table (gsi=irqchip.pin) covering all the VGIC SPI indexes. This routing table is overwritten by the first first user-space call to KVM_SET_GSI_ROUTING ioctl. MSI routing setup is not yet allowed. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Enable ITS emulation as a virtual MSI controllerAndre Przywara3-0/+8
Now that all ITS emulation functionality is in place, we advertise MSI functionality to userland and also the ITS device to the guest - if userland has configured that. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm/arm64: Extend arch CAP checks to allow per-VM capabilitiesAndre Przywara1-1/+1
KVM capabilities can be a per-VM property, though ARM/ARM64 currently does not pass on the VM pointer to the architecture specific capability handlers. Add a "struct kvm*" parameter to those function to later allow proper per-VM capability reporting. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-14arm64: KVM: Clean up a conditionDan Carpenter1-2/+2
My static checker complains that this condition looks like it should be == instead of =. This isn't a fast path, so we don't need to be fancy. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-04arm64: KVM: Simplify HYP init/teardownMarc Zyngier4-83/+23
Now that we only have the "merged page tables" case to deal with, there is a bunch of things we can simplify in the HYP code (both at init and teardown time). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-07-04arm/arm64: KVM: Always have merged page tablesMarc Zyngier1-24/+7
We're in a position where we can now always have "merged" page tables, where both the runtime mapping and the idmap coexist. This results in some code being removed, but there is more to come. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-07-04arm64: KVM: Always reference __hyp_panic_string via its kernel VAMarc Zyngier1-2/+9
__hyp_panic_string is passed via the HYP panic code to the panic function, and is being "upgraded" to a kernel address, as it is referenced by the HYP code (in a PC-relative way). This is a bit silly, and we'd be better off obtaining the kernel address and not mess with it at all. This patch implements this with a tiny bit of asm glue, by forcing the string pointer to be read from the literal pool. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-07-04KVM: arm/arm64: The GIC is dead, long live the GICMarc Zyngier2-15/+0
I don't think any single piece of the KVM/ARM code ever generated as much hatred as the GIC emulation. It was written by someone who had zero experience in modeling hardware (me), was riddled with design flaws, should have been scrapped and rewritten from scratch long before having a remote chance of reaching mainline, and yet we supported it for a good three years. No need to mention the names of those who suffered, the git log is singing their praises. Thankfully, we now have a much more maintainable implementation, and we can safely put the grumpy old GIC to rest. Fellow hackers, please raise your glass in memory of the GIC: The GIC is dead, long live the GIC! Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-06-21arm64/kvm: use ESR_ELx_EC to extract ECMark Rutland2-3/+3
Now that we have a helper to extract the EC from an ESR_ELx value, make use of this in the arm64 KVM code for simplicity and consistency. There should be no functional changes as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Dave P Martin <dave.martin@arm.com> Cc: Huang Shijie <shijie.huang@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: kvmarm@lists.cs.columbia.edu Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-21arm64: allow building with kcov coverage on ARM64Alexander Potapenko1-0/+4
Add ARCH_HAS_KCOV to ARM64 config. To avoid potential crashes, disable instrumentation of the files in arch/arm64/kvm/hyp/*. Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: James Morse <james.morse@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-14KVM: ARM64: Fix typosAndrea Gelmini2-2/+2
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-31arm64: KVM: vgic-v3: Relax synchronization when SRE==1Marc Zyngier1-7/+16
The GICv3 backend of the vgic is quite barrier heavy, in order to ensure synchronization of the system registers and the memory mapped view for a potential GICv2 guest. But when the guest is using a GICv3 model, there is absolutely no need to execute all these heavy barriers, and it is actually beneficial to avoid them altogether. This patch makes the synchonization conditional, and ensures that we do not change the EL1 SRE settings if we do not need to. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>