| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 1fcb7cea8a5f7747e02230f816c2c80b060d9517 ]
After removing uneccessary TLBIs, the next bottleneck when creating the
page tables for the linear map is DSB and ISB, which were previously
issued per-pte in __set_pte(). Since we are writing multiple ptes in a
given pte table, we can elide these barriers and insert them once we
have finished writing to the table.
Execution time of map_mem(), which creates the kernel linear map page
tables, was measured on different machines with different RAM configs:
| Apple M2 VM | Ampere Altra| Ampere Altra| Ampere Altra
| VM, 16G | VM, 64G | VM, 256G | Metal, 512G
---------------|-------------|-------------|-------------|-------------
| ms (%) | ms (%) | ms (%) | ms (%)
---------------|-------------|-------------|-------------|-------------
before | 78 (0%) | 435 (0%) | 1723 (0%) | 3779 (0%)
after | 11 (-86%) | 161 (-63%) | 656 (-62%) | 1654 (-56%)
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240412131908.433043-3-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Ryan: Trivial backport ]
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c25c4aa3f79a488cc270507935a29c07dc6bddfc upstream.
Commit 143937ca51cc ("arm64, mm: avoid always making PTE dirty in
pte_mkwrite()") changed pte_mkwrite_novma() to only clear PTE_RDONLY
when PTE_DIRTY is set. This was to allow writable-clean PTEs for swap
pages that haven't actually been written.
However, this broke kexec and hibernation for some platforms. Both go
through trans_pgd_create_copy() -> _copy_pte(), which calls
pte_mkwrite_novma() to make the temporary linear-map copy fully
writable. With the updated pte_mkwrite_novma(), read-only kernel pages
(without PTE_DIRTY) remain read-only in the temporary mapping.
While such behaviour is fine for user pages where hardware DBM or
trapping will make them writeable, subsequent in-kernel writes by the
kexec relocation code will fault.
Add PTE_DIRTY back to all _PAGE_KERNEL* protection definitions. This was
the case prior to 5.4, commit aa57157be69f ("arm64: Ensure
VM_WRITE|VM_SHARED ptes are clean by default"). With the kernel
linear-map PTEs always having PTE_DIRTY set, pte_mkwrite_novma()
correctly clears PTE_RDONLY.
Fixes: 143937ca51cc ("arm64, mm: avoid always making PTE dirty in pte_mkwrite()")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: stable@vger.kernel.org
Reported-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Link: https://lore.kernel.org/r/20251204062722.3367201-1-jianpeng.chang.cn@windriver.com
Cc: Will Deacon <will@kernel.org>
Cc: Huang, Ying <ying.huang@linux.alibaba.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bb0c99e08ab9aa6d04b40cb63c72db9950d51749 ]
The implementation of __READ_ONCE() under CONFIG_LTO=y incorrectly
qualified the fallback "once" access for types larger than 8 bytes,
which are not atomic but should still happen "once" and suppress common
compiler optimizations.
The cast `volatile typeof(__x)` applied the volatile qualifier to the
pointer type itself rather than the pointee. This created a volatile
pointer to a non-volatile type, which violated __READ_ONCE() semantics.
Fix this by casting to `volatile typeof(*__x) *`.
With a defconfig + LTO + debug options build, we see the following
functions to be affected:
xen_manage_runstate_time (884 -> 944 bytes)
xen_steal_clock (248 -> 340 bytes)
^-- use __READ_ONCE() to load vcpu_runstate_info structs
Fixes: e35123d83ee3 ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y")
Cc: stable@vger.kernel.org
Reviewed-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Tested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e3f7d120086c8b9d6e1ae0dd4917fc529daa1ca ]
The HV_REGISTER_ are used as arguments to hv_set/get_register(), which
delegate to arch-specific mechanisms for getting/setting synthetic
Hyper-V MSRs.
On arm64, HV_REGISTER_ defines are synthetic VP registers accessed via
the get/set vp registers hypercalls. The naming matches the TLFS
document, although these register names are not specific to arm64.
However, on x86 the prefix HV_REGISTER_ indicates Hyper-V MSRs accessed
via rdmsrl()/wrmsrl(). This is not consistent with the TLFS doc, where
HV_REGISTER_ is *only* used for used for VP register names used by
the get/set register hypercalls.
To fix this inconsistency and prevent future confusion, change the
arch-generic aliases used by callers of hv_set/get_register() to have
the prefix HV_MSR_ instead of HV_REGISTER_.
Use the prefix HV_X64_MSR_ for the x86-only Hyper-V MSRs. On x86, the
generic HV_MSR_'s point to the corresponding HV_X64_MSR_.
Move the arm64 HV_REGISTER_* defines to the asm-generic hyperv-tlfs.h,
since these are not specific to arm64. On arm64, the generic HV_MSR_'s
point to the corresponding HV_REGISTER_.
While at it, rename hv_get/set_registers() and related functions to
hv_get/set_msr(), hv_get/set_nested_msr(), etc. These are only used for
Hyper-V MSRs and this naming makes that clear.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1708440933-27125-1-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1708440933-27125-1-git-send-email-nunodasneves@linux.microsoft.com>
Stable-dep-of: 49f49d47af67 ("Drivers: hv: Always do Hyper-V panic notification in hv_kmsg_dump()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 143937ca51cc6ae2fccc61a1cb916abb24cd34f5 ]
Current pte_mkwrite_novma() makes PTE dirty unconditionally. This may
mark some pages that are never written dirty wrongly. For example,
do_swap_page() may map the exclusive pages with writable and clean PTEs
if the VMA is writable and the page fault is for read access.
However, current pte_mkwrite_novma() implementation always dirties the
PTE. This may cause unnecessary disk writing if the pages are
never written before being reclaimed.
So, change pte_mkwrite_novma() to clear the PTE_RDONLY bit only if the
PTE_DIRTY bit is set to make it possible to make the PTE writable and
clean.
The current behavior was introduced in commit 73e86cb03cf2 ("arm64:
Move PTE_RDONLY bit handling out of set_pte_at()"). Before that,
pte_mkwrite() only sets the PTE_WRITE bit, while set_pte_at() only
clears the PTE_RDONLY bit if both the PTE_WRITE and the PTE_DIRTY bits
are set.
To test the performance impact of the patch, on an arm64 server
machine, run 16 redis-server processes on socket 1 and 16
memtier_benchmark processes on socket 0 with mostly get
transactions (that is, redis-server will mostly read memory only).
The memory footprint of redis-server is larger than the available
memory, so swap out/in will be triggered. Test results show that the
patch can avoid most swapping out because the pages are mostly clean.
And the benchmark throughput improves ~23.9% in the test.
Fixes: 73e86cb03cf2 ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()")
Signed-off-by: Huang Ying <ying.huang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3bbf004c4808e2c3241e5c1ad6cc102f38a03c39 upstream.
Add cputype definitions for Neoverse-V3AE. These will be used for errata
detection in subsequent patches.
These values can be found in the Neoverse-V3AE TRM:
https://developer.arm.com/documentation/SDEN-2615521/9-0/
... in section A.6.1 ("MIDR_EL1, Main ID Register").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
CONFIG_DYNAMIC_FTRACE
commit a7ed7b9d0ebb038db9963d574da0311cab0b666a upstream.
On arm64, it has been possible for a module's sections to be placed more
than 128M away from each other since commit:
commit 3e35d303ab7d ("arm64: module: rework module VA range selection")
Due to this, an ftrace callsite in a module's .init.text section can be
out of branch range for the module's ftrace PLT entry (in the module's
.text section). Any attempt to enable tracing of that callsite will
result in a BRK being patched into the callsite, resulting in a fatal
exception when the callsite is later executed.
Fix this by adding an additional trampoline for .init.text, which will
be within range.
No additional trampolines are necessary due to the way a given
module's executable sections are packed together. Any executable
section beginning with ".init" will be placed in MOD_INIT_TEXT,
and any other executable section, including those beginning with ".exit",
will be placed in MOD_TEXT.
Fixes: 3e35d303ab7d ("arm64: module: rework module VA range selection")
Cc: <stable@vger.kernel.org> # 6.5.x
Signed-off-by: panfan <panfan@qti.qualcomm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250905032236.3220885-1-panfan@qti.qualcomm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9942cb22ea458c34fa17b73d143ea32d4df1caca upstream.
Create a new method to get a unique and fixed max frequency. Currently
cpuinfo.max_freq or the highest (or last) state of performance domain are
used as the max frequency when computing the frequency for a level of
utilization, but:
- cpuinfo_max_freq can change at runtime. boost is one example of
such change.
- cpuinfo.max_freq and last item of the PD can be different leading to
different results between cpufreq and energy model.
We need to save the reference frequency that has been used when computing
the CPUs capacity and use this fixed and coherent value to convert between
frequency and CPU's capacity.
In fact, we already save the frequency that has been used when computing
the capacity of each CPU. We extend the precision to save kHz instead of
MHz currently and we modify the type to be aligned with other variables
used when converting frequency to capacity and the other way.
[ mingo: Minor edits. ]
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20231211104855.558096-2-vincent.guittot@linaro.org
Stable-dep-of: e37617c8e53a ("sched/fair: Fix frequency selection for non-invariant case")
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 65c430906efffee9bd7551d474f01a6b1197df90 ]
GCC appears to have kind of fragile inlining heuristics, in the
sense that it can change whether or not it inlines something based on
optimizations. It looks like the kcov instrumentation being added (or in
this case, removed) from a function changes the optimization results,
and some functions marked "inline" are _not_ inlined. In that case,
we end up with __init code calling a function not marked __init, and we
get the build warnings I'm trying to eliminate in the coming patch that
adds __no_sanitize_coverage to __init functions:
WARNING: modpost: vmlinux: section mismatch in reference: acpi_get_enable_method+0x1c (section: .text.unlikely) -> acpi_psci_present (section: .init.text)
This problem is somewhat fragile (though using either __always_inline
or __init will deterministically solve it), but we've tripped over
this before with GCC and the solution has usually been to just use
__always_inline and move on.
For arm64 this requires forcing one ACPI function to be inlined with
__always_inline.
Link: https://lore.kernel.org/r/20250724055029.3623499-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d42e6c20de6192f8e4ab4cf10be8c694ef27e8cb upstream.
`cpu_switch_to()` and `call_on_irq_stack()` manipulate SP to change
to different stacks along with the Shadow Call Stack if it is enabled.
Those two stack changes cannot be done atomically and both functions
can be interrupted by SErrors or Debug Exceptions which, though unlikely,
is very much broken : if interrupted, we can end up with mismatched stacks
and Shadow Call Stack leading to clobbered stacks.
In `cpu_switch_to()`, it can happen when SP_EL0 points to the new task,
but x18 stills points to the old task's SCS. When the interrupt handler
tries to save the task's SCS pointer, it will save the old task
SCS pointer (x18) into the new task struct (pointed to by SP_EL0),
clobbering it.
In `call_on_irq_stack()`, it can happen when switching from the task stack
to the IRQ stack and when switching back. In both cases, we can be
interrupted when the SCS pointer points to the IRQ SCS, but SP points to
the task stack. The nested interrupt handler pushes its return addresses
on the IRQ SCS. It then detects that SP points to the task stack,
calls `call_on_irq_stack()` and clobbers the task SCS pointer with
the IRQ SCS pointer, which it will also use !
This leads to tasks returning to addresses on the wrong SCS,
or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK
or FPAC if enabled.
This is possible on a default config, but unlikely.
However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and
instead the GIC is responsible for filtering what interrupts the CPU
should receive based on priority.
Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU
even in `cpu_switch_to()` and `call_on_irq_stack()`, possibly *very*
frequently depending on the system configuration and workload, leading
to unpredictable kernel panics.
Completely mask DAIF in `cpu_switch_to()` and restore it when returning.
Do the same in `call_on_irq_stack()`, but restore and mask around
the branch.
Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency
of behaviour between all configurations.
Introduce and use an assembly macro for saving and masking DAIF,
as the existing one saves but only masks IF.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Reported-by: Cristian Prundeanu <cpru@amazon.com>
Fixes: 59b37fe52f49 ("arm64: Stash shadow stack pointer in the task struct on interrupt")
Tested-by: Cristian Prundeanu <cpru@amazon.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250718142814.133329-1-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4b634918384c0f84c33aeb4dd9fd4c38e7be5ccb upstream.
Commit 3ea277194daa ("mm, mprotect: flush TLB if potentially racing with
a parallel reclaim leaving stale TLB entries") describes a race that,
prior to the commit, could occur between reclaim and operations such as
mprotect() when using reclaim's tlbbatch mechanism. See that commit for
details but the summary is:
"""
Nadav Amit identified a theoritical race between page reclaim and
mprotect due to TLB flushes being batched outside of the PTL being held.
He described the race as follows:
CPU0 CPU1
---- ----
user accesses memory using RW PTE
[PTE now cached in TLB]
try_to_unmap_one()
==> ptep_get_and_clear()
==> set_tlb_ubc_flush_pending()
mprotect(addr, PROT_READ)
==> change_pte_range()
==> [ PTE non-present - no flush ]
user writes using cached RW PTE
...
try_to_unmap_flush()
"""
The solution was to insert flush_tlb_batched_pending() in mprotect() and
friends to explcitly drain any pending reclaim TLB flushes. In the
modern version of this solution, arch_flush_tlb_batched_pending() is
called to do that synchronisation.
arm64's tlbbatch implementation simply issues TLBIs at queue-time
(arch_tlbbatch_add_pending()), eliding the trailing dsb(ish). The
trailing dsb(ish) is finally issued in arch_tlbbatch_flush() at the end
of the batch to wait for all the issued TLBIs to complete.
Now, the Arm ARM states:
"""
The completion of the TLB maintenance instruction is guaranteed only by
the execution of a DSB by the observer that performed the TLB
maintenance instruction. The execution of a DSB by a different observer
does not have this effect, even if the DSB is known to be executed after
the TLB maintenance instruction is observed by that different observer.
"""
arch_tlbbatch_add_pending() and arch_tlbbatch_flush() conform to this
requirement because they are called from the same task (either kswapd or
caller of madvise(MADV_PAGEOUT)), so either they are on the same CPU or
if the task was migrated, __switch_to() contains an extra dsb(ish).
HOWEVER, arm64's arch_flush_tlb_batched_pending() is also implemented as
a dsb(ish). But this may be running on a CPU remote from the one that
issued the outstanding TLBIs. So there is no architectural gurantee of
synchonization. Therefore we are still vulnerable to the theoretical
race described in Commit 3ea277194daa ("mm, mprotect: flush TLB if
potentially racing with a parallel reclaim leaving stale TLB entries").
Fix this by flushing the entire mm in arch_flush_tlb_batched_pending().
This aligns with what the other arches that implement the tlbbatch
feature do.
Cc: <stable@vger.kernel.org>
Fixes: 43b3dfdd0455 ("arm64: support batched/deferred tlb shootdown during page reclamation/migration")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250530152445.2430295-1-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 398edaa12f9cf2be7902f306fc023c20e3ebd3e4 ]
Historically SVE state was discarded deterministically early in the
syscall entry path, before ptrace is notified of syscall entry. This
permitted ptrace to modify SVE state before and after the "real" syscall
logic was executed, with the modified state being retained.
This behaviour was changed by commit:
8c845e2731041f0f ("arm64/sve: Leave SVE enabled on syscall if we don't context switch")
That commit was intended to speed up workloads that used SVE by
opportunistically leaving SVE enabled when returning from a syscall.
The syscall entry logic was modified to truncate the SVE state without
disabling userspace access to SVE, and fpsimd_save_user_state() was
modified to discard userspace SVE state whenever
in_syscall(current_pt_regs()) is true, i.e. when
current_pt_regs()->syscallno != NO_SYSCALL.
Leaving SVE enabled opportunistically resulted in a couple of changes to
userspace visible behaviour which weren't described at the time, but are
logical consequences of opportunistically leaving SVE enabled:
* Signal handlers can observe the type of saved state in the signal's
sve_context record. When the kernel only tracks FPSIMD state, the 'vq'
field is 0 and there is no space allocated for register contents. When
the kernel tracks SVE state, the 'vq' field is non-zero and the
register contents are saved into the record.
As a result of the above commit, 'vq' (and the presence of SVE
register state) is non-deterministically zero or non-zero for a period
of time after a syscall. The effective register state is still
deterministic.
Hopefully no-one relies on this being deterministic. In general,
handlers for asynchronous events cannot expect a deterministic state.
* Similarly to signal handlers, ptrace requests can observe the type of
saved state in the NT_ARM_SVE and NT_ARM_SSVE regsets, as this is
exposed in the header flags. As a result of the above commit, this is
now in a non-deterministic state after a syscall. The effective
register state is still deterministic.
Hopefully no-one relies on this being deterministic. In general,
debuggers would have to handle this changing at arbitrary points
during program flow.
Discarding the SVE state within fpsimd_save_user_state() resulted in
other changes to userspace visible behaviour which are not desirable:
* A ptrace tracer can modify (or create) a tracee's SVE state at syscall
entry or syscall exit. As a result of the above commit, the tracee's
SVE state can be discarded non-deterministically after modification,
rather than being retained as it previously was.
Note that for co-operative tracer/tracee pairs, the tracer may
(re)initialise the tracee's state arbitrarily after the tracee sends
itself an initial SIGSTOP via a syscall, so this affects realistic
design patterns.
* The current_pt_regs()->syscallno field can be modified via ptrace, and
can be altered even when the tracee is not really in a syscall,
causing non-deterministic discarding to occur in situations where this
was not previously possible.
Further, using current_pt_regs()->syscallno in this way is unsound:
* There are data races between readers and writers of the
current_pt_regs()->syscallno field.
The current_pt_regs()->syscallno field is written in interruptible
task context using plain C accesses, and is read in irq/softirq
context using plain C accesses. These accesses are subject to data
races, with the usual concerns with tearing, etc.
* Writes to current_pt_regs()->syscallno are subject to compiler
reordering.
As current_pt_regs()->syscallno is written with plain C accesses,
the compiler is free to move those writes arbitrarily relative to
anything which doesn't access the same memory location.
In theory this could break signal return, where prior to restoring the
SVE state, restore_sigframe() calls forget_syscall(). If the write
were hoisted after restore of some SVE state, that state could be
discarded unexpectedly.
In practice that reordering cannot happen in the absence of LTO (as
cross compilation-unit function calls happen prevent this reordering),
and that reordering appears to be unlikely in the presence of LTO.
Additionally, since commit:
f130ac0ae4412dbe ("arm64: syscall: unmask DAIF earlier for SVCs")
... DAIF is unmasked before el0_svc_common() sets regs->syscallno to the
real syscall number. Consequently state may be saved in SVE format prior
to this point.
Considering all of the above, current_pt_regs()->syscallno should not be
used to infer whether the SVE state can be discarded. Luckily we can
instead use cpu_fp_state::to_save to track when it is safe to discard
the SVE state:
* At syscall entry, after the live SVE register state is truncated, set
cpu_fp_state::to_save to FP_STATE_FPSIMD to indicate that only the
FPSIMD portion is live and needs to be saved.
* At syscall exit, once the task's state is guaranteed to be live, set
cpu_fp_state::to_save to FP_STATE_CURRENT to indicate that TIF_SVE
must be considered to determine which state needs to be saved.
* Whenever state is modified, it must be saved+flushed prior to
manipulation. The state will be truncated if necessary when it is
saved, and reloading the state will set fp_state::to_save to
FP_STATE_CURRENT, preventing subsequent discarding.
This permits SVE state to be discarded *only* when it is known to have
been truncated (and the non-FPSIMD portions must be zero), and ensures
that SVE state is retained after it is explicitly modified.
For backporting, note that this fix depends on the following commits:
* b2482807fbd4 ("arm64/sme: Optimise SME exit on syscall entry")
* f130ac0ae441 ("arm64: syscall: unmask DAIF earlier for SVCs")
* 929fa99b1215 ("arm64/fpsimd: signal: Always save+flush state early")
Fixes: 8c845e273104 ("arm64/sve: Leave SVE enabled on syscall if we don't context switch")
Fixes: f130ac0ae441 ("arm64: syscall: unmask DAIF earlier for SVCs")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250508132644.1395904-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95507570fb2f75544af69760cd5d8f48fc5c7f20 ]
The SME trap handler consumes RES0 bits from the ESR when determining
the reason for the trap, and depends upon those bits reading as zero.
This may break in future when those RES0 bits are allocated a meaning
and stop reading as zero.
For SME traps taken with ESR_ELx.EC == 0b011101, the specific reason for
the trap is indicated by ESR_ELx.ISS.SMTC ("SME Trap Code"). This field
occupies bits [2:0] of ESR_ELx.ISS, and as of ARM DDI 0487 L.a, bits
[24:3] of ESR_ELx.ISS are RES0. ESR_ELx.ISS itself occupies bits [24:0]
of ESR_ELx.
Extract the SMTC field specifically, matching the way we handle ESR_ELx
fields elsewhere, and ensuring that the handler is future-proof.
Fixes: 8bd7f91c03d8 ("arm64/sme: Implement traps and syscall handling for SME")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409164010.3480271-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bfb1d2b9021c21891427acc86eb848ccedeb274e ]
pud_bad() is currently defined in terms of pud_table(). Although for some
configs, pud_table() is hard-coded to true i.e. when using 64K base pages
or when page table levels are less than 3.
pud_bad() is intended to check that the pud is configured correctly. Hence
let's open-code the same check that the full version of pud_table() uses
into pud_bad(). Then it always performs the check regardless of the config.
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250221044227.1145393-7-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e18c09b204e81702ea63b9f1a81ab003b72e3174 ]
The HIP09 processor is vulnerable to the Spectre-BHB (Branch History
Buffer) attack, which can be exploited to leak information through
branch prediction side channels. This commit adds the MIDR of HIP09
to the list for software mitigation.
Signed-off-by: Jinqian Yang <yangjinqian1@huawei.com>
Link: https://lore.kernel.org/r/20250325141900.2057314-1-yangjinqian1@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit efe676a1a7554219eae0b0dcfe1e0cdcc9ef9aef upstream.
Update the list of 'k' values for the branch mitigation from arm's
website.
Add the values for Cortex-X1C. The MIDR_EL1 value can be found here:
https://developer.arm.com/documentation/101968/0002/Register-descriptions/AArch>
Link: https://developer.arm.com/documentation/110280/2-0/?lang=en
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0dfefc2ea2f29ced2416017d7e5b1253a54c2735 upstream.
A malicious BPF program may manipulate the branch history to influence
what the hardware speculates will happen next.
On exit from a BPF program, emit the BHB mititgation sequence.
This is only applied for 'classic' cBPF programs that are loaded by
seccomp.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a1152be30a043d2d4dcb1683415f328bf3c51978 upstream.
Add a helper to expose the k value of the branchy loop. This is needed
by the BPF JIT to generate the mitigation sequence in BPF programs.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e7956c92f396a44eeeb6eaf7a5b5e1ad24db6748 upstream.
is_spectre_bhb_fw_affected() allows the caller to determine if the CPU
is known to need a firmware mitigation. CPUs are either on the list
of CPUs we know about, or firmware has been queried and reported that
the platform is affected - and mitigated by firmware.
This helper is not useful to determine if the platform is mitigated
by firmware. A CPU could be on the know list, but the firmware may
not be implemented. Its affected but not mitigated.
spectre_bhb_enable_mitigation() handles this distinction by checking
the firmware state before enabling the mitigation.
Add a helper to expose this state. This will be used by the BPF JIT
to determine if calling firmware for a mitigation is necessary and
supported.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 63de8abd97ddb9b758bd8f915ecbd18e1f1a87a0 upstream.
To generate code in the eBPF epilogue that uses the DSB instruction,
insn.c needs a heler to encode the type and domain.
Re-use the crm encoding logic from the DMB instruction.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f7edb07ad7c66eab3dce57384f33b9799d579133 upstream.
Update the __flush_tlb_range_op macro not to modify its parameters as
these are unexepcted semantics. In practice, this fixes the call to
mmu_notifier_arch_invalidate_secondary_tlbs() in
__flush_tlb_range_nosync() to use the correct range instead of an empty
range with start=end. The empty range was (un)lucky as it results in
taking the invalidate-all path that doesn't cause correctness issues,
but can certainly result in suboptimal perf.
This has been broken since commit 6bbd42e2df8f ("mmu_notifiers: call
invalidate_range() when invalidating TLBs") when the call to the
notifiers was added to __flush_tlb_range(). It predates the addition of
the __flush_tlb_range_op() macro from commit 360839027a6e ("arm64: tlb:
Refactor the core flush algorithm of __flush_tlb_range") that made the
bug hard to spot.
Fixes: 6bbd42e2df8f ("mmu_notifiers: call invalidate_range() when invalidating TLBs")
Signed-off-by: Piotr Jaroszynski <pjaroszynski@nvidia.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Nicolin Chen <nicolinc@nvidia.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux.dev
Cc: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/r/20250304085127.2238030-1-pjaroszynski@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
[will: Resolve conflicts due to lack of LPA2 support]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e403e8538359d8580cbee1976ff71813e947101e upstream.
The code for detecting CPUs that are vulnerable to Spectre BHB was
based on a hardcoded list of CPU IDs that were known to be affected.
Unfortunately, the list mostly only contained the IDs of standard ARM
cores. The IDs for many cores that are minor variants of the standard
ARM cores (like many Qualcomm Kyro CPUs) weren't listed. This led the
code to assume that those variants were not affected.
Flip the code on its head and instead assume that a core is vulnerable
if it doesn't have CSV2_3 but is unrecognized as being safe. This
involves creating a "Spectre BHB safe" list.
As of right now, the only CPU IDs added to the "Spectre BHB safe" list
are ARM Cortex A35, A53, A55, A510, and A520. This list was created by
looking for cores that weren't listed in ARM's list [1] as per review
feedback on v2 of this patch [2]. Additionally Brahma A53 is added as
per mailing list feedback [3].
NOTE: this patch will not actually _mitigate_ anyone, it will simply
cause them to report themselves as vulnerable. If any cores in the
system are reported as vulnerable but not mitigated then the whole
system will be reported as vulnerable though the system will attempt
to mitigate with the information it has about the known cores.
[1] https://developer.arm.com/Arm%20Security%20Center/Spectre-BHB
[2] https://lore.kernel.org/r/20241219175128.GA25477@willie-the-truck
[3] https://lore.kernel.org/r/18dbd7d1-a46c-4112-a425-320c99f67a8d@broadcom.com
Fixes: 558c303c9734 ("arm64: Mitigate spectre style branch history side channels")
Cc: stable@vger.kernel.org
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250107120555.v4.2.I2040fa004dafe196243f67ebcc647cbedbb516e6@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a9b5bd81b294d30a747edd125e9f6aef2def7c79 upstream.
>From the TRM, MIDR_CORTEX_A76AE has a partnum of 0xDOE and an
implementor of 0x41 (ARM). Add the values.
Cc: stable@vger.kernel.org # dependency of the next fix in the series
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250107120555.v4.4.I151f3b7ee323bcc3082179b8c60c3cd03308aa94@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 401c3333bb2396aa52e4121887a6f6a6e2f040bc ]
Add a definition for the Qualcomm Kryo 300-series Gold cores.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Trilok Soni <quic_tsoni@quicinc.com>
Link: https://lore.kernel.org/r/20241219131107.v3.1.I18e0288742871393228249a768e5d56ea65d93dc@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 59419f10045bc955d2229819c7cf7a8b0b9c5b59 ]
In non-protected KVM modes, while the guest FPSIMD/SVE/SME state is live on the
CPU, the host's active SVE VL may differ from the guest's maximum SVE VL:
* For VHE hosts, when a VM uses NV, ZCR_EL2 contains a value constrained
by the guest hypervisor, which may be less than or equal to that
guest's maximum VL.
Note: in this case the value of ZCR_EL1 is immaterial due to E2H.
* For nVHE/hVHE hosts, ZCR_EL1 contains a value written by the guest,
which may be less than or greater than the guest's maximum VL.
Note: in this case hyp code traps host SVE usage and lazily restores
ZCR_EL2 to the host's maximum VL, which may be greater than the
guest's maximum VL.
This can be the case between exiting a guest and kvm_arch_vcpu_put_fp().
If a softirq is taken during this period and the softirq handler tries
to use kernel-mode NEON, then the kernel will fail to save the guest's
FPSIMD/SVE state, and will pend a SIGKILL for the current thread.
This happens because kvm_arch_vcpu_ctxsync_fp() binds the guest's live
FPSIMD/SVE state with the guest's maximum SVE VL, and
fpsimd_save_user_state() verifies that the live SVE VL is as expected
before attempting to save the register state:
| if (WARN_ON(sve_get_vl() != vl)) {
| force_signal_inject(SIGKILL, SI_KERNEL, 0, 0);
| return;
| }
Fix this and make this a bit easier to reason about by always eagerly
switching ZCR_EL{1,2} at hyp during guest<->host transitions. With this
happening, there's no need to trap host SVE usage, and the nVHE/nVHE
__deactivate_cptr_traps() logic can be simplified to enable host access
to all present FPSIMD/SVE/SME features.
In protected nVHE/hVHE modes, the host's state is always saved/restored
by hyp, and the guest's state is saved prior to exit to the host, so
from the host's PoV the guest never has live FPSIMD/SVE/SME state, and
the host's ZCR_EL1 is never clobbered by hyp.
Fixes: 8c8010d69c132273 ("KVM: arm64: Save/restore SVE state for nVHE")
Fixes: 2e3cf82063a00ea0 ("KVM: arm64: nv: Ensure correct VL is loaded before saving SVE state")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-9-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
[ v6.6 lacks pKVM saving of host SVE state, pull in discovery of maximum
host VL separately -- broonie ]
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 407a99c4654e8ea65393f412c421a55cac539f5b ]
When KVM is in VHE mode, the host kernel tries to save and restore the
configuration of CPACR_EL1.SMEN (i.e. CPTR_EL2.SMEN when HCR_EL2.E2H=1)
across kvm_arch_vcpu_load_fp() and kvm_arch_vcpu_put_fp(), since the
configuration may be clobbered by hyp when running a vCPU. This logic
has historically been broken, and is currently redundant.
This logic was originally introduced in commit:
861262ab86270206 ("KVM: arm64: Handle SME host state when running guests")
At the time, the VHE hyp code would reset CPTR_EL2.SMEN to 0b00 when
returning to the host, trapping host access to SME state. Unfortunately,
this was unsafe as the host could take a softirq before calling
kvm_arch_vcpu_put_fp(), and if a softirq handler were to use kernel mode
NEON the resulting attempt to save the live FPSIMD/SVE/SME state would
result in a fatal trap.
That issue was limited to VHE mode. For nVHE/hVHE modes, KVM always
saved/restored the host kernel's CPACR_EL1 value, and configured
CPTR_EL2.TSM to 0b0, ensuring that host usage of SME would not be
trapped.
The issue above was incidentally fixed by commit:
375110ab51dec5dc ("KVM: arm64: Fix resetting SME trap values on reset for (h)VHE")
That commit changed the VHE hyp code to configure CPTR_EL2.SMEN to 0b01
when returning to the host, permitting host kernel usage of SME,
avoiding the issue described above. At the time, this was not identified
as a fix for commit 861262ab86270206.
Now that the host eagerly saves and unbinds its own FPSIMD/SVE/SME
state, there's no need to save/restore the state of the EL0 SME trap.
The kernel can safely save/restore state without trapping, as described
above, and will restore userspace state (including trap controls) before
returning to userspace.
Remove the redundant logic.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-5-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
[Update for rework of flags storage -- broonie]
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 459f059be702056d91537b99a129994aa6ccdd35 ]
When KVM is in VHE mode, the host kernel tries to save and restore the
configuration of CPACR_EL1.ZEN (i.e. CPTR_EL2.ZEN when HCR_EL2.E2H=1)
across kvm_arch_vcpu_load_fp() and kvm_arch_vcpu_put_fp(), since the
configuration may be clobbered by hyp when running a vCPU. This logic is
currently redundant.
The VHE hyp code unconditionally configures CPTR_EL2.ZEN to 0b01 when
returning to the host, permitting host kernel usage of SVE.
Now that the host eagerly saves and unbinds its own FPSIMD/SVE/SME
state, there's no need to save/restore the state of the EL0 SVE trap.
The kernel can safely save/restore state without trapping, as described
above, and will restore userspace state (including trap controls) before
returning to userspace.
Remove the redundant logic.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-4-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
[Rework for refactoring of where the flags are stored -- broonie]
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8eca7f6d5100b6997df4f532090bc3f7e0203bef ]
Now that the host eagerly saves its own FPSIMD/SVE/SME state,
non-protected KVM never needs to save the host FPSIMD/SVE/SME state,
and the code to do this is never used. Protected KVM still needs to
save/restore the host FPSIMD/SVE state to avoid leaking guest state to
the host (and to avoid revealing to the host whether the guest used
FPSIMD/SVE/SME), and that code needs to be retained.
Remove the unused code and data structures.
To avoid the need for a stub copy of kvm_hyp_save_fpsimd_host() in the
VHE hyp code, the nVHE/hVHE version is moved into the shared switch
header, where it is only invoked when KVM is in protected mode.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2fd5b4b0e7b440602455b79977bfa64dea101e6c ]
Similar to VHE, calculate the value of cptr_el2 from scratch on
activate traps. This removes the need to store cptr_el2 in every
vcpu structure. Moreover, some traps, such as whether the guest
owns the fp registers, need to be set on every vcpu run.
Reported-by: James Clark <james.clark@linaro.org>
Fixes: 5294afdbf45a ("KVM: arm64: Exclude FP ownership from kvm_vcpu_arch")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-13-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 02410ac72ac3707936c07ede66e94360d0d65319 upstream.
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the huge_pte is being cleared in huge_ptep_get_and_clear().
Provide for this by adding an `unsigned long sz` parameter to the
function. This follows the same pattern as huge_pte_clear() and
set_huge_pte_at().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, loongarch, mips,
parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed
in a separate commit.
Cc: stable@vger.kernel.org
Fixes: 66b3923a1a0f ("arm64: hugetlb: add support for PTE contiguous bit")
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390
Link: https://lore.kernel.org/r/20250226120656.2400136-2-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
PROT_MTE (memory tagging extensions) is not supported on all user mmap()
types for various reasons (memory attributes, backing storage, CoW
handling). The arm64 arch_validate_flags() function checks whether the
VM_MTE_ALLOWED flag has been set for a vma during mmap(), usually by
arch_calc_vm_flag_bits().
Linux prior to 6.13 does not support PROT_MTE hugetlb mappings. This was
added by commit 25c17c4b55de ("hugetlb: arm64: add mte support").
However, earlier kernels inadvertently set VM_MTE_ALLOWED on
(MAP_ANONYMOUS | MAP_HUGETLB) mappings by only checking for
MAP_ANONYMOUS.
Explicitly check MAP_HUGETLB in arch_calc_vm_flag_bits() and avoid
setting VM_MTE_ALLOWED for such mappings.
Fixes: 9f3419315f3c ("arm64: mte: Add PROT_MTE support to mmap() and mprotect()")
Cc: <stable@vger.kernel.org> # 5.10.x-6.12.x
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 38d7aacca09230fdb98a34194fec2af597e8e20d upstream.
Improper use of userspace_irqchip_in_use led to syzbot hitting the
following WARN_ON() in kvm_timer_update_irq():
WARNING: CPU: 0 PID: 3281 at arch/arm64/kvm/arch_timer.c:459
kvm_timer_update_irq+0x21c/0x394
Call trace:
kvm_timer_update_irq+0x21c/0x394 arch/arm64/kvm/arch_timer.c:459
kvm_timer_vcpu_reset+0x158/0x684 arch/arm64/kvm/arch_timer.c:968
kvm_reset_vcpu+0x3b4/0x560 arch/arm64/kvm/reset.c:264
kvm_vcpu_set_target arch/arm64/kvm/arm.c:1553 [inline]
kvm_arch_vcpu_ioctl_vcpu_init arch/arm64/kvm/arm.c:1573 [inline]
kvm_arch_vcpu_ioctl+0x112c/0x1b3c arch/arm64/kvm/arm.c:1695
kvm_vcpu_ioctl+0x4ec/0xf74 virt/kvm/kvm_main.c:4658
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__arm64_sys_ioctl+0x108/0x184 fs/ioctl.c:893
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x78/0x1b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0xe8/0x1b0 arch/arm64/kernel/syscall.c:132
do_el0_svc+0x40/0x50 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x14c arch/arm64/kernel/entry-common.c:712
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
The following sequence led to the scenario:
- Userspace creates a VM and a vCPU.
- The vCPU is initialized with KVM_ARM_VCPU_PMU_V3 during
KVM_ARM_VCPU_INIT.
- Without any other setup, such as vGIC or vPMU, userspace issues
KVM_RUN on the vCPU. Since the vPMU is requested, but not setup,
kvm_arm_pmu_v3_enable() fails in kvm_arch_vcpu_run_pid_change().
As a result, KVM_RUN returns after enabling the timer, but before
incrementing 'userspace_irqchip_in_use':
kvm_arch_vcpu_run_pid_change()
ret = kvm_arm_pmu_v3_enable()
if (!vcpu->arch.pmu.created)
return -EINVAL;
if (ret)
return ret;
[...]
if (!irqchip_in_kernel(kvm))
static_branch_inc(&userspace_irqchip_in_use);
- Userspace ignores the error and issues KVM_ARM_VCPU_INIT again.
Since the timer is already enabled, control moves through the
following flow, ultimately hitting the WARN_ON():
kvm_timer_vcpu_reset()
if (timer->enabled)
kvm_timer_update_irq()
if (!userspace_irqchip())
ret = kvm_vgic_inject_irq()
ret = vgic_lazy_init()
if (unlikely(!vgic_initialized(kvm)))
if (kvm->arch.vgic.vgic_model !=
KVM_DEV_TYPE_ARM_VGIC_V2)
return -EBUSY;
WARN_ON(ret);
Theoretically, since userspace_irqchip_in_use's functionality can be
simply replaced by '!irqchip_in_kernel()', get rid of the static key
to avoid the mismanagement, which also helps with the syzbot issue.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c56c599d9002d44f559be3852b371db46adac87c ]
FEAT_MOPS instructions require that all three instructions (prologue,
main and epilogue) appear consecutively in memory. Placing a
kprobe/uprobe on one of them doesn't work as only a single instruction
gets executed out-of-line or simulated. So don't allow placing a probe
on a MOPS instruction.
Fixes: b7564127ffcb ("arm64: mops: detect and enable FEAT_MOPS")
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20240930161051.3777828-2-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5baf8b037debf4ec60108ccfeccb8636d1dbad81 ]
Currently MTE is permitted in two circumstances (desiring to use MTE
having been specified by the VM_MTE flag) - where MAP_ANONYMOUS is
specified, as checked by arch_calc_vm_flag_bits() and actualised by
setting the VM_MTE_ALLOWED flag, or if the file backing the mapping is
shmem, in which case we set VM_MTE_ALLOWED in shmem_mmap() when the mmap
hook is activated in mmap_region().
The function that checks that, if VM_MTE is set, VM_MTE_ALLOWED is also
set is the arm64 implementation of arch_validate_flags().
Unfortunately, we intend to refactor mmap_region() to perform this check
earlier, meaning that in the case of a shmem backing we will not have
invoked shmem_mmap() yet, causing the mapping to fail spuriously.
It is inappropriate to set this architecture-specific flag in general mm
code anyway, so a sensible resolution of this issue is to instead move the
check somewhere else.
We resolve this by setting VM_MTE_ALLOWED much earlier in do_mmap(), via
the arch_calc_vm_flag_bits() call.
This is an appropriate place to do this as we already check for the
MAP_ANONYMOUS case here, and the shmem file case is simply a variant of
the same idea - we permit RAM-backed memory.
This requires a modification to the arch_calc_vm_flag_bits() signature to
pass in a pointer to the struct file associated with the mapping, however
this is not too egregious as this is only used by two architectures anyway
- arm64 and parisc.
So this patch performs this adjustment and removes the unnecessary
assignment of VM_MTE_ALLOWED in shmem_mmap().
[akpm@linux-foundation.org: fix whitespace, per Catalin]
Link: https://lkml.kernel.org/r/ec251b20ba1964fb64cf1607d2ad80c47f3873df.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 13f8f1e05f1dc36dbba6cba0ae03354c0dafcde7 upstream.
The arm64 uprobes code is broken for big-endian kernels as it doesn't
convert the in-memory instruction encoding (which is always
little-endian) into the kernel's native endianness before analyzing and
simulating instructions. This may result in a few distinct problems:
* The kernel may may erroneously reject probing an instruction which can
safely be probed.
* The kernel may erroneously erroneously permit stepping an
instruction out-of-line when that instruction cannot be stepped
out-of-line safely.
* The kernel may erroneously simulate instruction incorrectly dur to
interpretting the byte-swapped encoding.
The endianness mismatch isn't caught by the compiler or sparse because:
* The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so
the compiler and sparse have no idea these contain a little-endian
32-bit value. The core uprobes code populates these with a memcpy()
which similarly does not handle endianness.
* While the uprobe_opcode_t type is an alias for __le32, both
arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[]
to the similarly-named probe_opcode_t, which is an alias for u32.
Hence there is no endianness conversion warning.
Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and
adding the appropriate __le32_to_cpu() conversions prior to consuming
the instruction encoding. The core uprobes copies these fields as opaque
ranges of bytes, and so is unaffected by this change.
At the same time, remove MAX_UINSN_BYTES and consistently use
AARCH64_INSN_SIZE for clarity.
Tested with the following:
| #include <stdio.h>
| #include <stdbool.h>
|
| #define noinline __attribute__((noinline))
|
| static noinline void *adrp_self(void)
| {
| void *addr;
|
| asm volatile(
| " adrp %x0, adrp_self\n"
| " add %x0, %x0, :lo12:adrp_self\n"
| : "=r" (addr));
| }
|
|
| int main(int argc, char *argv)
| {
| void *ptr = adrp_self();
| bool equal = (ptr == adrp_self);
|
| printf("adrp_self => %p\n"
| "adrp_self() => %p\n"
| "%s\n",
| adrp_self, ptr, equal ? "EQUAL" : "NOT EQUAL");
|
| return 0;
| }
.... where the adrp_self() function was compiled to:
| 00000000004007e0 <adrp_self>:
| 4007e0: 90000000 adrp x0, 400000 <__ehdr_start>
| 4007e4: 911f8000 add x0, x0, #0x7e0
| 4007e8: d65f03c0 ret
Before this patch, the ADRP is not recognized, and is assumed to be
steppable, resulting in corruption of the result:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0xffffffffff7e0
| NOT EQUAL
After this patch, the ADRP is correctly recognized and simulated:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| #
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
Fixes: 9842ceae9fa8 ("arm64: Add uprobe support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 924725707d80bc2588cefafef76ff3f164d299bc ]
Add cputype definitions for Neoverse-N3. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-261 ("MIDR_EL1 bit descriptions")
in issue 02 of the Neoverse-N3 TRM, which can be found at:
https://developer.arm.com/documentation/107997/0000/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240930111705.3352047-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit db0d8a84348b876df7c4276f0cbce5df3b769f5f upstream.
The ampere1a cpu is affected by erratum AC04_CPU_10 which is the same
bug as AC03_CPU_38. Add ampere1a to the AC03_CPU_38 workaround midr list.
Cc: <stable@vger.kernel.org>
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827211701.2216719-1-scott@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b6db3eb6c373b97d9e433530d748590421bbeea7 upstream.
Add explicit casting to prevent expantion of 32th bit of
u32 into highest half of u64 in several places.
For example, in inject_abt64:
ESR_ELx_EC_DABT_LOW << ESR_ELx_EC_SHIFT = 0x24 << 26.
This operation's result is int with 1 in 32th bit.
While casting this value into u64 (esr is u64) 1
fills 32 highest bits.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: <stable@vger.kernel.org>
Fixes: aa8eff9bfbd5 ("arm64: KVM: fault injection into a guest")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/stable/20240910085016.32120-1-abelova%40astralinux.ru
Link: https://lore.kernel.org/r/20240910085016.32120-1-abelova@astralinux.ru
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2488444274c70038eb6b686cba5f1ce48ebb9cdd ]
In a review discussion of the changes to support vCPU hotplug where
a check was added on the GICC being enabled if was online, it was
noted that there is need to map back to the cpu and use that to index
into a cpumask. As such, a valid ID is needed.
If an MPIDR check fails in acpi_map_gic_cpu_interface() it is possible
for the entry in cpu_madt_gicc[cpu] == NULL. This function would
then cause a NULL pointer dereference. Whilst a path to trigger
this has not been established, harden this caller against the
possibility.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-13-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8d34b6f17b9ac93faa2791eb037dcb08bdf755de ]
ACPI identifies CPUs by UID. get_cpu_for_acpi_id() maps the ACPI UID
to the Linux CPU number.
The helper to retrieve this mapping is only available in arm64's NUMA
code.
Move it to live next to get_acpi_id_for_cpu().
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20240529133446.28446-12-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9ef54a384526911095db465e77acc1cb5266b32c ]
Add cputype definitions for Cortex-A725. These will be used for errata
detection in subsequent patches.
These values can be found in the Cortex-A725 TRM:
https://developer.arm.com/documentation/107652/0001/
... in table A-247 ("MIDR_EL1 bit descriptions").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240801101803.1982459-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 58d245e03c324d083a0ec3b9ab8ebd46ec9848d7 ]
Add cputype definitions for Cortex-X1C. These will be used for errata
detection in subsequent patches.
These values can be found in the Cortex-X1C TRM:
https://developer.arm.com/documentation/101968/0002/
... in section B2.107 ("MIDR_EL1, Main ID Register, EL1").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240801101803.1982459-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd2ff5f0b320f418288e7a1f919f648fbc8a0dfc ]
Add cputype definitions for Cortex-X925. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-285 ("MIDR_EL1 bit descriptions")
in issue 0001-05 of the Cortex-X925 TRM, which can be found at:
https://developer.arm.com/documentation/102807/0001/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit add332c40328cf06fe35e4b3cde8ec315c4629e5 ]
Add cputype definitions for Cortex-A720. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-186 ("MIDR_EL1 bit descriptions")
in issue 0002-05 of the Cortex-A720 TRM, which can be found at:
https://developer.arm.com/documentation/102530/0002/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be5a6f238700f38b534456608588723fba96c5ab ]
Add cputype definitions for Cortex-X3. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-263 ("MIDR_EL1 bit descriptions")
in issue 07 of the Cortex-X3 TRM, which can be found at:
https://developer.arm.com/documentation/101593/0102/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ce85db6c2141b7ffb95709d76fc55a27ff3cdc1 ]
Add cputype definitions for Neoverse-V3. These will be used for errata
detection in subsequent patches.
These values can be found in Table B-249 ("MIDR_EL1 bit descriptions")
in issue 0001-04 of the Neoverse-V3 TRM, which can be found at:
https://developer.arm.com/documentation/107734/0001/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 02a0a04676fa7796d9cbc9eb5ca120aaa194d2dd ]
Add cputype definitions for Cortex-X4. These will be used for errata
detection in subsequent patches.
These values can be found in Table B-249 ("MIDR_EL1 bit descriptions")
in issue 0002-05 of the Cortex-X4 TRM, which can be found at:
https://developer.arm.com/documentation/102484/0002/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: fix conflict (dealt with upstream via a later merge) ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ebfc726eae3f31bdb5fae1bbd74ef235d71046ca ]
Upcoming errata workarounds will need to use SB from C code. Restore the
spec_bar() macro so that we can use SB.
This is effectively a revert of commit:
4f30ba1cce36d413 ("arm64: barrier: Remove spec_bar() macro")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f4d9d9dcc70b96b5e5d7801bd5fbf8491b07b13d ]
Add the part number and MIDR for Neoverse-V2
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240109192310.16234-2-bwicaksono@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cfb00a35786414e7c0e6226b277d9f09657eae74 ]
Although the Arm architecture permits concurrent modification and
execution of NOP and branch instructions, it still requires some
synchronisation to ensure that other CPUs consistently execute the newly
written instruction:
> When the modified instructions are observable, each PE that is
> executing the modified instructions must execute an ISB or perform a
> context synchronizing event to ensure execution of the modified
> instructions
Prior to commit f6cc0c501649 ("arm64: Avoid calling stop_machine() when
patching jump labels"), the arm64 jump_label patching machinery
performed synchronisation using stop_machine() after each modification,
however this was problematic when flipping static keys from atomic
contexts (namely, the arm_arch_timer CPU hotplug startup notifier) and
so we switched to the _nosync() patching routines to avoid "scheduling
while atomic" BUG()s during boot.
In hindsight, the analysis of the issue in f6cc0c501649 isn't quite
right: it cites the use of IPIs in the default patching routines as the
cause of the lockup, whereas stop_machine() does not rely on IPIs and
the I-cache invalidation is performed using __flush_icache_range(),
which elides the call to kick_all_cpus_sync(). In fact, the blocking
wait for other CPUs is what triggers the BUG() and the problem remains
even after f6cc0c501649, for example because we could block on the
jump_label_mutex. Eventually, the arm_arch_timer driver was fixed to
avoid the static key entirely in commit a862fc2254bd
("clocksource/arm_arch_timer: Remove use of workaround static key").
This all leaves the jump_label patching code in a funny situation on
arm64 as we do not synchronise with other CPUs to reduce the likelihood
of a bug which no longer exists. Consequently, toggling a static key on
one CPU cannot be assumed to take effect on other CPUs, leading to
potential issues, for example with missing preempt notifiers.
Rather than revert f6cc0c501649 and go back to stop_machine() for each
patch site, implement arch_jump_label_transform_apply() and kick all
the other CPUs with an IPI at the end of patching.
Cc: Alexander Potapenko <glider@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Fixes: f6cc0c501649 ("arm64: Avoid calling stop_machine() when patching jump labels")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240731133601.3073-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
