summaryrefslogtreecommitdiff
path: root/arch/arm64/boot
AgeCommit message (Collapse)AuthorFilesLines
2022-06-24Merge tag 'samsung-fixes-5.19' of ↵Arnd Bergmann1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes Samsung fixes for v5.19 Both fixes are for issues present before v5.19 merge window: 1. Correct UART clocks on Exynos7885. Although the initial, fixed DTS commit is from v5.18, the issue will be exposed with a upcoming fix to Exynos7885 clock driver, so we need to correct the DTS earlier. 2. Fix theoretical OF node leak in Exynos machine code. * tag 'samsung-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos: Fix refcount leak in exynos_map_pmu arm64: dts: exynos: Correct UART clocks on Exynos7885 Link: https://lore.kernel.org/r/20220624080423.31427-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-06-24Merge tag 'ti-k3-dt-fixes-for-v5.19' of ↵Arnd Bergmann2-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/fixes Devicetree fixes for TI K3 platforms for v5.19 Critical fixes for the following: * Boot failure on J721s2 (overlap GIC memory map) * AM64 boot fails on highspeed cards (SoC characterization updates) * tag 'ti-k3-dt-fixes-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region Link: https://lore.kernel.org/r/20220618031627.xxvscc22c6doaa3t@kahuna Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-06-18arm64: dts: ti: k3-am64-main: Remove support for HS400 speed modeAswath Govindraju1-2/+0
AM64 SoC, does not support HS400 and HS200 is the maximum supported speed mode[1]. Therefore, fix the device tree node to reflect the same. [1] - https://www.ti.com/lit/ds/symlink/am6442.pdf (SPRSP56C – JANUARY 2021 – REVISED FEBRUARY 2022) Fixes: 8abae9389bdb ("arm64: dts: ti: Add support for AM642 SoC") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20220512064859.32059-1-a-govindraju@ti.com
2022-06-18arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory regionMatt Ranostay1-1/+1
GICD region was overlapping with GICR causing the latter to not map successfully, and in turn the gic-v3 driver would fail to initialize. This issue was hidden till commit 2b2cd74a06c3 ("irqchip/gic-v3: Claim iomem resources") replaced of_iomap() calls with of_io_request_and_map() that internally called request_mem_region(). Respective console output before this patchset: [ 0.000000] GICv3: /bus@100000/interrupt-controller@1800000: couldn't map region 0 Fixes: b8545f9d3a54 ("arm64: dts: ti: Add initial support for J721S2 SoC") Cc: linux-stable@vger.kernel.org Cc: Marc Zyngier <maz@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Matt Ranostay <mranostay@ti.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20220617151304.446607-1-mranostay@ti.com
2022-06-07arm64: s32g2: Pass unit name to soc nodeFabio Estevam1-1/+1
Pass unit name to soc node to fix the following W=1 build warning: arch/arm64/boot/dts/freescale/s32g2.dtsi:82.6-123.4: Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Chester Lin <clin@suse.com> Signed-off-by: Chester Lin <clin@suse.com> Link: https://lore.kernel.org/r/20220514143505.1554813-1-festevam@gmail.com
2022-06-06arm64: dts: exynos: Correct UART clocks on Exynos7885David Virag1-6/+6
The clocks in the serial UART nodes were swapped by mistake on Exynos7885. This only worked correctly because of a mistake in the clock driver which has been fixed. With the fixed clock driver in place, the baudrate of the UARTs get miscalculated. Fix this by correcting the clocks in the dtsi. Fixes: 06874015327b ("arm64: dts: exynos: Add initial device tree support for Exynos7885 SoC") Signed-off-by: David Virag <virag.david003@gmail.com> Link: https://lore.kernel.org/r/20220526055840.45209-3-virag.david003@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-06-03Merge tag 'usb-5.19-rc1' of ↵Linus Torvalds20-125/+239
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...
2022-06-03Merge tag 'arm-late-5.19' of ↵Linus Torvalds7-5/+81
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM SoC updates from Arnd Bergmann: "This is the second part of the general SoC updates, containing everything that did not make it in the initial pull request, or that came in as a bugfix later. - Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip, including a new machine using an ASPEED BMC. - More DT fixes from Krzysztof Kozlowski across platforms - A new SoC platform for the GXP baseboard management controller, used in current server products from HPE" * tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits) ARM: configs: Enable more audio support for i.MX tee: optee: Pass a pointer to virt_addr_valid() arm64: dts: rockchip: rename Quartz64-A bluetooth gpios arm64: dts: rockchip: add clocks property to cru node rk3368 arm64: dts: rockchip: add clocks property to cru node rk3308 arm64: dts: rockchip: add clocks to rk356x cru ARM: dts: rockchip: add clocks property to cru node rk3228 ARM: dts: rockchip: add clocks property to cru node rk3036 ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188 ARM: dts: rockchip: add clocks property to cru node rk3288 ARM: dts: rockchip: Remove "amba" bus nodes from rv1108 ARM: dts: rockchip: add clocks property to cru node rv1108 arm64: dts: sprd: use new 'dma-channels' property ARM: dts: da850: use new 'dma-channels' property ARM: dts: pxa: use new 'dma-channels/requests' properties soc: ixp4xx/qmgr: Fix unused match warning ARM: ep93xx: Make ts72xx_register_flash() static ARM: configs: enable support for Kontron KSwitch D10 ep93xx: clock: Do not return the address of the freed memory arm64: dts: intel: add device tree for n6000 ...
2022-05-30Merge tag 'socfpga_dts_updates_for_v5.19' of ↵Arnd Bergmann2-1/+68
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/late SoCFPGA dts updates for v5.19 - dtschema fix SPI NOR node - correct dt-bindings doc for Altera gpio driver - add support for n6000 Agilex platform and dt-bindings documentation * tag 'socfpga_dts_updates_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: intel: add device tree for n6000 dt-bindings: intel: add binding for Intel n6000 dt-bindings: soc: add bindings for Intel HPS Copy Engine dt-bindings: gpio: altera: correct interrupt-cells ARM: dts: socfpga: align SPI NOR node name with dtschema Link: https://lore.kernel.org/r/20220519232317.16079-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27Merge tag 'v5.19-rockchip-dts64-2' of ↵Arnd Bergmann4-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/late Clock properties for cru nodes to match the yaml-converted bindings and renaming of Quartz-A bluetooth pin nodename to not conflict with Yaml constraints. * tag 'v5.19-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: rename Quartz64-A bluetooth gpios arm64: dts: rockchip: add clocks property to cru node rk3368 arm64: dts: rockchip: add clocks property to cru node rk3308 arm64: dts: rockchip: add clocks to rk356x cru Link: https://lore.kernel.org/r/7695907.Sb9uPGUboI@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27arm64: dts: rockchip: rename Quartz64-A bluetooth gpiosPeter Geis1-2/+2
The bluetooth binding for the Quartz64 Model A has incorrectly named host-wakeup and device-wakeup gpios. Rename them to clear some dtbs_check warnings. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20220511150117.113070-4-pgwipeout@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-05-27arm64: dts: rockchip: add clocks property to cru node rk3368Johan Jonker1-0/+2
Add clocks and clock-names because the device has to have at least one input clock. Also in case someone wants to add properties that start with assign-xxx to fix warnings like: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20220329180550.31043-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-05-27arm64: dts: rockchip: add clocks property to cru node rk3308Johan Jonker1-2/+3
Add clocks and clock-names to the rk3308 cru node, because the device has to have at least one input clock. Also in case someone wants to add properties that start with assign-xxx to fix warnings like: 'clocks' is a dependency of 'assigned-clocks' With the addition of new properties also sort the node properties a little bit. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20220329184339.1134-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-05-27arm64: dts: rockchip: add clocks to rk356x cruPeter Geis1-0/+2
The rk356x cru requires a 24m clock input to function. Add the clocks properties to the cru to clear some dtbs_check warnings. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20220511150117.113070-3-pgwipeout@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-05-27arm64: dts: sprd: use new 'dma-channels' propertyKrzysztof Kozlowski1-0/+4
The '#dma-channels' property was deprecated in favor of one defined by generic dma-common DT bindings. Add new property while keeping old one for backwards compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/20220516142857.6419-4-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-26Merge tag 'kbuild-v5.19' of ↵Linus Torvalds1-21/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add HOSTPKG_CONFIG env variable to allow users to override pkg-config - Support W=e as a shorthand for KCFLAGS=-Werror - Fix CONFIG_IKHEADERS build to support toybox cpio - Add scripts/dummy-tools/pahole to ease distro packagers' life - Suppress false-positive warnings from checksyscalls.sh for W=2 build - Factor out the common code of arch/*/boot/install.sh into scripts/install.sh - Support 'kernel-install' tool in scripts/prune-kernel - Refactor module-versioning to link the symbol versions at the final link of vmlinux and modules - Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in an arch-agnostic way - Refactor modpost, Makefiles * tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits) genksyms: adjust the output format to modpost kbuild: stop merging *.symversions kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS modpost: extract symbol versions from *.cmd files modpost: add sym_find_with_module() helper modpost: change the license of EXPORT_SYMBOL to bool type modpost: remove left-over cross_compile declaration kbuild: record symbol versions in *.cmd files kbuild: generate a list of objects in vmlinux modpost: move *.mod.c generation to write_mod_c_files() modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header scripts/prune-kernel: Use kernel-install if available kbuild: factor out the common installation code into scripts/install.sh modpost: split new_symbol() to symbol allocation and hash table addition modpost: make sym_add_exported() always allocate a new symbol modpost: make multiple export error modpost: dump Module.symvers in the same order of modules.order modpost: traverse the namespace_list in order modpost: use doubly linked list for dump_lists modpost: traverse unresolved symbols in order ...
2022-05-26Merge tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds319-2911/+23243
Pull ARM DT updates from Arnd Bergmann: "There are 40 branches this time, adding a lot of new hardware support, and cleanups. Krzysztof Kozlowski continues his treewide cleanups. There are a number of new SoCs, all of them as part of existing families, and typically added along with a reference board: - Renesas RZ/G2UL (R9A07G043) is the single-core version of the RZ/G2L general-purpose MPU. - Renesas RZ/V2M (R9A09G011) is a smart camera SoC - Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76 cores and deep learning accerlation. - Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7 and dual Wifi-6. - Corstone1000 is a generic platform from Arm that is used for designing custom SoCs, the support for now is for the Fixed Virtual Platform emulation for it. - Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in upcoming Chromebooks. - NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first MMU-less SoC to be added in a while New machines based on already supported SoCs this time are mainly for 32-bit platforms and include: - Two wireless routers based on Broadcom bcm4708 - 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly for the industrial embedded market, and on NXP LS1021A based IOT board. - Two ethernet switches based on Microchip LAN966 - Eight Qualcomm Snapdragon based machines, including a smartwatch, a Chromebook board and some phones - Another phone based on the old ST-Ericsson Ux500 platform - Seven STM32MP1 based boards - Four single-board computers based on Rockchip RK3566/RK3568" * tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits) ARM: dts: kswitch-d10: enable networking ARM: dts: lan966x: add switch node ARM: dts: lan966x: add serdes node ARM: dts: lan966x: add reset switch reset node ARM: dts: lan966x: add MIIM nodes ARM: dts: lan966x: add hwmon node ARM: dts: lan966x: add basic Kontron KSwitch D10 support ARM: dts: lan966x: add flexcom I2C nodes ARM: dts: lan966x: add flexcom SPI nodes ARM: dts: lan966x: add all flexcom usart nodes ARM: dts: lan966x: add missing uart DMA channel ARM: dts: lan966x: add sgpio node ARM: dts: lan966x: swap dma channels for crypto node ARM: dts: lan966x: rename pinctrl nodes ARM: dts: at91: sama7g5: remove interrupt-parent from gic node ARM: dts: at91: use generic node name for dataflash ARM: dts: turris-omnia: Add atsha204a node arm64: dts: mt8192: Follow binding order for SCP registers arm64: dts: mediatek: add mtk-snfi for mt7622 arm64: dts: mediatek: mt8195-demo: enable uart1 ...
2022-05-23arm64: dts: mediatek: mt7986: introduce ethernet nodesLorenzo Bianconi3-0/+183
Introduce ethernet nodes in mt7986 bindings in order to enable mt7986a/mt7986b ethernet support. Co-developed-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-20arm64: dts: intel: add device tree for n6000Matthew Gerlach2-1/+68
Add a device tree for the n6000 instantiation of Agilex Hard Processor System (HPS). Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2022-05-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-5/+51
drivers/net/ethernet/mellanox/mlx5/core/main.c b33886971dbc ("net/mlx5: Initialize flow steering during driver probe") 40379a0084c2 ("net/mlx5_fpga: Drop INNOVA TLS support") f2b41b32cde8 ("net/mlx5: Remove ipsec_ops function table") https://lore.kernel.org/all/20220519040345.6yrjromcdistu7vh@sx1/ 16d42d313350 ("net/mlx5: Drain fw_reset when removing device") 8324a02c342a ("net/mlx5: Add exit route when waiting for FW") https://lore.kernel.org/all/20220519114119.060ce014@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh e274f7154008 ("selftests: mptcp: add subflow limits test-cases") b6e074e171bc ("selftests: mptcp: add infinite map testcase") 5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type") https://lore.kernel.org/all/20220516111918.366d747f@canb.auug.org.au/ net/mptcp/options.c ba2c89e0ea74 ("mptcp: fix checksum byte order") 1e39e5a32ad7 ("mptcp: infinite mapping sending") ea66758c1795 ("tcp: allow MPTCP to update the announced window") https://lore.kernel.org/all/20220519115146.751c3a37@canb.auug.org.au/ net/mptcp/pm.c 95d686517884 ("mptcp: fix subflow accounting on close") 4d25247d3ae4 ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs") https://lore.kernel.org/all/20220516111435.72f35dca@canb.auug.org.au/ net/mptcp/subflow.c ae66fb2ba6c3 ("mptcp: Do TCP fallback on early DSS checksum failure") 0348c690ed37 ("mptcp: add the fallback check") f8d4bcacff3b ("mptcp: infinite mapping receiving") https://lore.kernel.org/all/20220519115837.380bb8d4@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18arm64: dts: armada-3720-turris-mox: Correct reg property for mdio devicesChris Packham1-6/+6
MDIO devices have #address-cells = <1>, #size-cells = <0>. Now that we have a schema enforcing this for marvell,orion-mdio we can see that the turris-mox has a unnecessary 2nd cell for the switch nodes reg property of it's switch devices. Remove the unnecessary 2nd cell from the switches reg property. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-14Merge tag 'v5.18-next-dts64' of ↵Arnd Bergmann16-52/+2536
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt MT8195: - add evaluation and demo board MT8192: - add new nodes: pwrap, PMIC, scp, USB, efuse, IOMMU, smi, DPI, PCIe, SPMI, audio system, MMC and video enconder - add evaluation board MT8183: - fix dtschema issues - update compatible for the display ambient light processor (disp-aal) - fix dtschema warning for the pumpki board MT8173: - add power domains to the video enconder nodes - add GCE support to the display mutex node MT7622: - specify number of DMA requests explicitely - specify level 2 cache topology - add SPI-NAND flash device - fix dtschema warnings for the System Companion Processor (SCP) * tag 'v5.18-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (37 commits) arm64: dts: mt8192: Follow binding order for SCP registers arm64: dts: mediatek: add mtk-snfi for mt7622 arm64: dts: mediatek: mt8195-demo: enable uart1 arm64: dts: mediatek: mt8195-demo: Remove input-name property arm64: dts: mediatek: mt8183-pumpkin: fix bad thermistor node name arm64: dts: mt7622: specify the L2 cache topology arm64: dts: mt7622: specify the number of DMA requests arm64: dts: mediatek: pumpkin: Remove input-name property arm64: dts: mediatek: mt8173: Add gce-client-reg handle to disp-mutex arm64: dts: mediatek: Add device-tree for MT8195 Demo board dt-bindings: arm64: dts: mediatek: Add mt8195-demo board arm64: dts: Add mediatek SoC mt8195 and evaluation board arm64: dts: mt8192: Add mmc device nodes arm64: dts: mt8183: Update disp_aal node compatible arm64: dts: mt8192: Add audio-related nodes arm64: dts: mt8192: Add spmi node dt-bindings: arm: Add compatible for Mediatek MT8192 arm64: dts: mt6359: add PMIC MT6359 related nodes arm64: dts: mediatek: mt8173: Add power domain to encoder nodes arm64: dts: mediatek: Get rid of mediatek, larb for MM nodes ... Link: https://lore.kernel.org/r/2cd90ca7-7541-d47a-fec6-b0c64cf74fa3@gmail.com Like the 32-bit branch, this contains an incompatible binding change by removing the mediatek,larb properties from the dts files, so these no longer work with kernels prior to 5.18. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-13Merge tag 'mvebu-dt64-5.19-1' of ↵Arnd Bergmann5-16/+20
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt64 for 5.19 (part 1) Update sdhci node names to match schema on all mvebu dt64 dtsi files Armada 3720: uDPU board: - correct temperature sensors - update partition table espressobin-ultra board: - enable front USB3 port - add PHY and switch reset pins - fix SPI-NOR config * tag 'mvebu-dt64-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: Update sdhci node names to match schema arm64: dts: marvell: espressobin-ultra: enable front USB3 port arm64: dts: marvell: espressobin-ultra: add PHY and switch reset pins arm64: dts: marvell: espressobin-ultra: fix SPI-NOR config arm64: dts: uDPU: correct temperature sensors arm64: dts: uDPU: update partition table Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-13arm64: dts: mt8192: Follow binding order for SCP registersNícolas F. R. A. Prado1-3/+3
The dt-binding for SCP documents the reg-names order as sram, cfg, l1tcm. Update the SCP node on the mt8192 devicetree to follow that order, which gets rid of a dtbs_check warning. This doesn't change any behavior since the SCP driver accesses the memory regions through the names anyway. Fixes: c63556ec6bfe ("arm64: dts: mt8192: Add SCP node") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20220504214516.2957504-1-nfraprado@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-05-13arm64: dts: mediatek: add mtk-snfi for mt7622Chuanhong Guo1-0/+12
This patch adds a device-tree node for the MTK SPI-NAND Flash Interface for MT7622 device tree. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20220424032527.673605-6-gch981213@gmail.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-05-13arm64: dts: mediatek: mt8195-demo: enable uart1Fabien Parent1-0/+6
The UART1 is exposed on a header. Enable the uart1 node to be able to use it. Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20220426134106.242353-8-fparent@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-05-13arm64: dts: mediatek: mt8195-demo: Remove input-name propertyFabien Parent1-1/+0
This property doesn't seem to exist in the documentation nor in source code, let's remove it from the device-tree. Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20220426134106.242353-7-fparent@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-05-13arm64: dts: mediatek: mt8183-pumpkin: fix bad thermistor node nameFabien Parent1-1/+1
Fix the following dtbs_check error by using the correct node name: /home/fabo/build/linux/mt8183-pumpkin/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dtb: ntc: $nodename:0: 'ntc' does not match '^thermistor(.*)?$' From schema: /home/fabo/devel/baylibre/linux-mainline/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20220426164755.435372-1-fparent@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-05-13arm64: dts: mt7622: specify the L2 cache topologyRui Salvaterra1-0/+7
On an MT7622 system, the kernel complains of not being able to detect the cache hierarchy of CPU 0. Specify the shared L2 cache node in the device tree, in order to fix this. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Link: https://lore.kernel.org/r/20220428225755.785153-1-rsalvaterra@gmail.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-05-13arm64: dts: mt7622: specify the number of DMA requestsRui Salvaterra1-0/+1
The MT7622 device tree never bothered to specify the number of virtual DMA channels for the HSDMA controller, always falling back to the default value of 3. Make this value explicit, in order to avoid the following dmesg notification: mtk_hsdma 1b007000.dma-controller: Using 3 as missing dma-requests property Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Link: https://lore.kernel.org/r/20220429084225.298213-1-rsalvaterra@gmail.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-05-13arm64: dts: mediatek: pumpkin: Remove input-name propertyDang Huynh1-1/+0
This property doesn't seem to exist in the documentation nor in source code, but for some reason it is defined in a bunch of device trees. Signed-off-by: Dang Huynh <danct12@riseup.net> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20220425064850.246228-1-danct12@riseup.net Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-05-13Merge tag 'visconti-arm-dt-for-v5.19' of ↵Arnd Bergmann4-62/+53
git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti into arm/dt Visconti device tree updates for 5.19 - Update the clock providers for PCIe host controller - Update the clock providers for ethernet device - Update the clock providers for SPI - Update the clock providers for watchdog timer - Update the clock providers for I2C - Update the clock providers for UART - Add clock controller support for TMPV7708 * tag 'visconti-arm-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti: arm64: dts: visconti: Update the clock providers for PCIe host controller arm64: dts: visconti: Update the clock providers for ethernet device arm64: dts: visconti: Update the clock providers for SPI arm64: dts: visconti: Update the clock providers for watchdog timer arm64: dts: visconti: Update the clock providers for I2C arm64: dts: visconti: Update the clock providers for UART arm64: dts: visconti: Add clock controller support for TMPV7708 Link: https://lore.kernel.org/r/TYWPR01MB94201E842A2F8E5E9EBF740D92C99@TYWPR01MB9420.jpnprd01.prod.outlook.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-13Merge tag 'v5.19-rockchip-dts64-1' of ↵Arnd Bergmann28-16/+3075
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New peripherals supported on rk356x: sfc, usb3, sata and the video-decoder on rk3328. RK3399 received some improvements and nodes for the memory controller. Additional peripherals for PineNote, Gru and BananaPi-R2-Pro. New boards are the Firefly Station M2, Pine64 SoQuartz SOM and Quartz64 model B as well as the Radxa Rock3 model A. * tag 'v5.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (32 commits) arm64: dts: rockchip: enable otg/drd operation of usb_host0_xhci in rk356x arm64: dts: rockchip: rename HDMI ref clock to 'ref' on rk3399 arm64: dts: rockchip: add dts for Firefly Station M2 rk3566 arm64: dts: rockchip: add SoQuartz CM4IO dts arm64: dts: rockchip: add Pine64 Quartz64-B device tree dt-bindings: arm: rockchip: Add Firefly Station M2 dt-bindings: arm: rockchip: Add Pine64 SoQuartz SoM dt-bindings: arm: rockchip: Add Pine64 Quartz64 Model B arm64: dts: rockchip: enable usb hub on the radxa rock3 model a arm64: dts: rockchip: add usb3 support to the radxa rock3 model a arm64: dts: rockchip: add rk356x sfc support arm64: dts: rockchip: Add USB and TCPC to rk3566-pinenote arm64: dts: rockchip: Add accelerometer to rk3566-pinenote arm64: dts: rockchip: add an input enable pinconf to rk3399 arm64: dts: rockchip: Add vdec support for RK3328 arm64: dts: rockchip: Rename vdec_mmu node for RK3328 arm64: dts: rockchip: Enable dmc and dfi nodes on gru arm64: dts: rockchip: Add dfi and dmc nodes to rk3399 arm64: dts: rockchip: add clocks property to cru nodes rk3399 arm64: dts: rockchip: use generic node name for pmucru on rk3399 ... Link: https://lore.kernel.org/r/7748558.DvuYhMxLoT@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-12Merge tag 'v5.18-rockchip-dtsfixes1' of ↵Arnd Bergmann1-5/+35
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Fixes for the mass-production version of BananaPi R2-Pro. The mass market version received some changes compared to preproduction versions and especially the io-domain setting could affect the lifespan of the board if the wrong dt gets booted on it. * tag 'v5.18-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add gmac1 and change network settings of bpi-r2-pro arm64: dts: rockchip: Change io-domains of bpi-r2-pro Link: https://lore.kernel.org/r/2300256.NG923GbCHz@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-11kbuild: factor out the common installation code into scripts/install.shMasahiro Yamada1-21/+0
Many architectures have similar install.sh scripts. The first half is really generic; it verifies that the kernel image and System.map exist, then executes ~/bin/${INSTALLKERNEL} or /sbin/${INSTALLKERNEL} if available. The second half is kind of arch-specific; it copies the kernel image and System.map to the destination, but the code is slightly different. Factor out the generic part into scripts/install.sh. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2022-05-11arm64: dts: rockchip: enable otg/drd operation of usb_host0_xhci in rk356xMichael Riesch1-1/+1
This USB 3.0 controller is capable of OTG/DRD operation. Enable it in the device tree. Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220425133502.405512-1-michael.riesch@wolfvision.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-05-10arm64: dts: visconti: Update the clock providers for PCIe host controllerNobuhiro Iwamatsu2-16/+2
Remove fixed clock and source common clock for PCIe host controller. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20220510015229.139818-7-nobuhiro1.iwamatsu@toshiba.co.jp/
2022-05-10arm64: dts: visconti: Update the clock providers for ethernet deviceNobuhiro Iwamatsu3-18/+2
Remove fixed clock and source common clock for ethernet device. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20220510015229.139818-6-nobuhiro1.iwamatsu@toshiba.co.jp/
2022-05-10arm64: dts: visconti: Update the clock providers for SPINobuhiro Iwamatsu2-9/+14
Remove fixed clock and source common clock for SPI. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20220510015229.139818-5-nobuhiro1.iwamatsu@toshiba.co.jp/
2022-05-10arm64: dts: visconti: Update the clock providers for watchdog timerNobuhiro Iwamatsu3-8/+1
Remove fixed clock and source common clock for watchdog timer. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20220510015229.139818-4-nobuhiro1.iwamatsu@toshiba.co.jp/
2022-05-10arm64: dts: visconti: Update the clock providers for I2CNobuhiro Iwamatsu2-1/+9
Replace I2C clock with common clock framework. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20220510015229.139818-3-nobuhiro1.iwamatsu@toshiba.co.jp/
2022-05-10arm64: dts: visconti: Update the clock providers for UARTNobuhiro Iwamatsu3-14/+8
Remove fixed clock and source common clock for UART. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20220510015229.139818-2-nobuhiro1.iwamatsu@toshiba.co.jp/
2022-05-10arm64: dts: visconti: Add clock controller support for TMPV7708Nobuhiro Iwamatsu1-0/+21
Adds node of clock controller support for Toshiba Visconti TMPV7708. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20220421080143.2135566-1-nobuhiro1.iwamatsu@toshiba.co.jp/
2022-05-10Merge tag 'imx-dt64-5.19' of ↵Arnd Bergmann58-314/+5355
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree update for 5.19: - New board support: Engicam i.Core MX8M Plus SoM and EDIMM2.2 Starter Kit, Toradex Verdin i.MX8M Plus devices, Data Modul i.MX8M Mini eDM SBC, Verdin based MX8Menlo, 8MNANOD3L EVK, i.MX8M Plus Gateworks GW7400. - Enable RTS-CTS on UART3 for imx8mm-beacon and imx8mn-beacon boards. - Enable HS400-ES support for i.MX8MN and i.MX8MP uSDHC devices by updating the compatible. - A few updates on imx8mq-librem5 to increase boost regulation current, add panel compatible for r4 ("Evergreen") revision and volume buttons a wakeup source. - Clean up vendor specific 'fsl,uart-has-rtscts' property by using standard 'uart-has-rtscts'. - Add GPC, GPU, MEDIAMIX, and HSIO power domains for i.MX8M Plus SoC. - A series from Marcel Ziswiler to improve imx8mm-verdin support, including cosmetic changes and functional improvements like SD1 sleep pinctrl and fully validated IOMUX configuration. - Add PWM polarity inversion support for i.MX8 SoCs. - A couple of changes from Michael Walle to update PMIC output names and min/max voltages for imx8mn-evk board. - A series from Tim Harvey to improve imx8mm-venice boards, add missing uart-has-rtscts property to UARTs, clock-names to pcie_phy, and vdd_5p0 ADC channel. - Add VPU codec devices for i.MX8QXP SoC. - Other small and random changes. * tag 'imx-dt64-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (65 commits) arm64: dt: imx8mp: support pwm polarity inversion arm64: dt: imx8mn: support pwm polarity inversion arm64: dt: imx8mm: support pwm polarity inversion arm64: dt: imx8mq: support pwm polarity inversion arm64: dts: imx8mm-venice-gw7901: remove unnecessary cpu temp override arm64: dts: imx8mm-venice-gw7902: add vdd_5p0 ADC channel arm64: dts: imx8m*venice: add missing clock-names to pcie_phy arm64: dts: imx8mm-venice-gw7902: fix pcie bindings arm64: dts: freescale: reduce the interrup-map-mask arm64: dts: imx8mn-beacon: Enable RTS-CTS on UART3 arm64: dts: imx8mm-beacon: Enable RTS-CTS on UART3 arm64: dts: imx8mm: Use 100 kHz I2C2 on Data Modul i.MX8M Mini eDM SBC arm64: dts: imx8mm: Disable USB2 OC on Data Modul i.MX8M Mini eDM SBC arm64: dts: imx8mm: Add CPLD on MX8Menlo board arm64: dts: imx8mq-kontron-pitx-imx8m: Use the standard 'uart-has-rtscts' arm64: dts: imx8mp-verdin: Use the standard 'uart-has-rtscts' arm64: dts: imx8mp: Add MEDIA_BLK_CTRL arm64: dts: imx8mp: Add MEDIAMIX power domains arm64: dts: imx8mp: add HSIO power-domains arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit ... Link: https://lore.kernel.org/r/20220508033843.2773685-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-10Merge tag 'qcom-arm64-for-5.19' of ↵Arnd Bergmann83-1861/+6234
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for v5.19 This adds MDIO bus description on the IPQ6018 platform. On MSM8916 the BAM-DMUX WWAN network device is added and the Huawei Ascend G7 gains sound card definition and clarified installation instructions. MSM8992 and MSM8994 continues to be worked on, gaining multimedia clock controller, on-chip memory, watchdog and various cleanup changes. The Xiaomi Mi 4C gains CPU regulators and fixes to the framebuffer definition, while Huawei Nexus 6P gains eMMC support. On MSM8996 the modem and sensor remtoeprocs are added and enabled in the Dragonboard 820c and the Xiaomi devices. On MSM8998 a few newly added clocks related to the sensor subsystem bus are marked as protected by default and the OnePlus devices gains NFC. The SC7180 platform and devices thereon are further polished and limozeen moves to using edp-panel for EDID-based detection, over statically defined panels. On SC7280 GPI DMA, WiFi remoteproc and network device, LPASS audio clocks, resets for SDCC controllers and a new CRD revision are added. A supply glitch on the PCIe power and a current leak for Bluetooth during suspend are corrected. The Herobrine board gains eDP support and the IDP gains backlight. USB is marked wakeup capable. On SDM845 the IPA, WLED based backlight and second WiFi channel are enabled for Xiaomi Pocophone F1, the firmware name is modified to not conflict with other boards. On RB3 the CAN bus controller is added and the WiFi calibration variant is defined to allow adding the board's calibration information into linux-firmware. SM6350 gains I2C busses, UFS and WiFi support, and the numbering of uart9 is corrected. On SM7225 and the Fairphone 4 UFS, WiFi and haptics are enabled. On SM8150 PCIe, Ethernet and uSD card support is added, and enabled for the SA8155p ADP board. The PDC interrupt controller is also added and described as wakup interrupt parent for TLMM. Camera subsystem and control interface are defined for SM8250. On the Sony Xperia 1 II the audio amplifiers are enabled. On SM8350 GPI DMA engines are added and linked to the I2C and SPI serial engines. Surface Duo 2 gains battery charger support. On SM8450 the two PCIe controller/PHYs are enabled, GPI DMA and QUP serial engine instances are added. Remoteproc instances are enabled on SM8450 HDK. Last, but not least, a number of DeviceTree validation errors across various boards are corrected. * tag 'qcom-arm64-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (150 commits) arm64: dts: qcom: Only include sc7180.dtsi in sc7180-trogdor.dtsi arm64: dts: qcom: sc7180-trogdor: Simplify spi0/spi6 labeling arm64: dts: qcom: sc7180-trogdor: Simplify trackpad enabling arm64: dts: qcom: sc7280: eDP for herobrine boards arm64: dts: qcom: sa8155p-adp: Disable multiple Tx and Rx queues for ethernet IP arm64: dts: qcom: sm8150: Fix iommu sid value for SDC2 controller arm64: dts: qcom: sm8350-duo2: enable battery charger arm64: dts: qcom: Enable pm8350c pwm for sc7280-idp2 arm64: dts: qcom: pm8350c: Add pwm support arm64: dts: qcom: sc7280-qcard: Configure CTS pin to bias-bus-hold for bluetooth arm64: dts: qcom: sc7280-idp: Configure CTS pin to bias-bus-hold for bluetooth arm64: dts: qcom: sc7180: Remove ipa interconnect node arm64: dts: qcom: sc7280-idp: Enable GPI DMAs arm64: dts: qcom: sc7280: Add GENI I2C/SPI DMA channels arm64: dts: qcom: sc7280: Add GPI DMAengines arm64: dts: qcom: sm8450: Fix qmp phy node (use phy@ instead of lanes@) arm64: dts: qcom: db845c: Add support for MCP2517FD arm64: dts: qcom: qrb5165-rb5: Fix can-clock node name arm64: dts: qcom: sc7280: Add SAR sensors to herobrine crd arm64: dts: qcom: sm8250: camss: Add CCI definitions ... Link: https://lore.kernel.org/r/20220509204451.325675-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-10Merge tag 'qcom-arm64-fixes-for-5.18' of ↵Arnd Bergmann2-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 DT fixes for v5.18 This disables the two Soundwire controllers as well as rx and tx macros by default on the SM8250 platform to avoid crashes on devices where these aren't available. * tag 'qcom-arm64-fixes-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sm8250: don't enable rx/tx macro by default Link: https://lore.kernel.org/r/20220509152310.306179-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-09Merge tag 'ti-k3-dt-for-v5.19' of ↵Arnd Bergmann9-12/+988
git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt TI K3 device tree updates for v5.19 New Features: J721e: * Enable DSS, DP, HDMI on J721e EVM and SK AM62: * MCAN, MCU GPIO, ECAP APWM, DMA, Etherent and several peripheral on AM62 SK EVM AM64: * Enable Wireless LAN support Fixes: Drop incorrect MCU UART clock rates * tag 'ti-k3-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: arm64: dts: ti: k3-j721e-sk: Enable HDMI arm64: dts: ti: k3-j721e-sk: Enable DisplayPort arm64: dts: ti: k3-j721e-common-proc-board: add DP to j7 evm arm64: dts: ti: k3-j721e-*: add DP & DP PHY arm64: dts: ti: k3-am62: Add SA3UL ranges in cbass_main arm64: dts: ti: k3-am62: Add support for MCAN arm64: dts: ti: k3-am62-mcu: Enable MCU GPIO module arm64: dts: ti: k3-am625-sk: Add ECAP APWM nodes arm64: dts: ti: k3-am625-sk: Enable on board peripherals arm64: dts: ti: k3-am62: Add more peripheral nodes arm64: dts: ti: k3-am642-sk: Enable WLAN connected to SDHCI0 arm64: dts: ti: k3-am64-mcu: remove incorrect UART base clock rates Link: https://lore.kernel.org/r/3dc2011b-eb6d-dcd5-3921-57f6a1cf6d8e@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-09arm64: dts: marvell: Update sdhci node names to match schemaChris Packham3-4/+4
Update the node names of the sdhci@ interfaces to be mmc@ to match the node name enforced by the mmc-controller.yaml schema. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-05-09arm64: dts: marvell: espressobin-ultra: enable front USB3 portRobert Marko1-1/+0
Espressobin Ultra has a front panel USB3.0 Type-A port which works just fine so enable it. I dont see a reason why it was disabled in the first place anyway. Fixes: 3404fe15a60f ("arm64: dts: marvell: add DT for ESPRESSObin-Ultra") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-05-09arm64: dts: marvell: espressobin-ultra: add PHY and switch reset pinsRobert Marko1-0/+4
Both the Topaz switch and 88E1512 PHY have their reset and interrupts connected to the SoC. So, define the Topaz and 88E1512 reset pins in the DTS. Defining the interrupt pins wont work as both the 88E1512 and the Topaz switch uses active LOW IRQ signals but the A37xx GPIO controller only supports edge triggers. 88E1512 would require special setup anyway as its INT pin is shared with the LED2 and you first need to configure it as INT. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-22 23:16:31 +0300