summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2022-11-21Merge tag 'imx-fixes-6.1-3' of ↵Arnd Bergmann1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.1, part 3: - Fix a small memory leak in mach-mxs code. - Correct PCIe pad configuration for imx8mp-evk board. - Fix ref/tcxo clock frequency property for imx6q-prti6q board. * tag 'imx-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6q-prti6q: Fix ref/tcxo-clock-frequency properties arm64: dts: imx8mp-evk: correct pcie pad settings ARM: mxs: fix memory leak in mxs_machine_init() Link: https://lore.kernel.org/r/20221119073812.GQ16229@T480 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21Merge tag 'sunxi-fixes-for-6.1-1' of ↵Arnd Bergmann1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes - RSB bus communication fixes - missing IOMMU reference property to H6 Hantro G2 * tag 'sunxi-fixes-for-6.1-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h6: Add IOMMU reference to Hantro G2 media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property bus: sunxi-rsb: Support atomic transfers bus: sunxi-rsb: Remove the shutdown callback Link: https://lore.kernel.org/r/Y3ftpBFk5+fndA4B@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-19arm64: dts: imx8mp-evk: correct pcie pad settingsPeng Fan1-3/+3
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Although function is not broken, we should not set reserved bit. Fixes: d50650500064 ("arm64: dts: imx8mp-evk: Add PCIe support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-17Merge tag 'imx-fixes-6.1-2' of ↵Arnd Bergmann4-9/+29
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.1, 2nd round: - Switch to usb-role-switch for fixing USB device mode on tqma8mqml-mba8mx board, so that Dual Role is fully functional. - A series from Marek Vasut to fix dt-schema warning caused by NAND controller size-cells. - Fix file permission of imx93-pinfunc header. - Enable OCOTP clock in soc-imx8m driver to fix a kexec kernel hang issue. * tag 'imx-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx8m: Enable OCOTP clock before reading the register arm64: dts: imx93-pinfunc: drop execution permission arm64: dts: imx8mn: Fix NAND controller size-cells arm64: dts: imx8mm: Fix NAND controller size-cells ARM: dts: imx7: Fix NAND controller size-cells arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR Link: https://lore.kernel.org/r/20221116090402.GA1274@T480 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-16arm64: dts: allwinner: h6: Add IOMMU reference to Hantro G2Chen-Yu Tsai1-0/+1
The Hantro G2 video decoder block sits behind the IOMMU. Without a reference for the system to properly configure the IOMMU, it will fault and cause the video decoder to fail. Add a proper reference to the IOMMU port. The master ID is taken from the IOMMU fault error message on Linux, and the number seems to match the order in the user manual's IOMMU diagram. Fixes: 0baddea60e8d ("arm64: dts: allwinner: h6: Add Hantro G2 node") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221115090644.3602573-3-wenst@chromium.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-11-14Merge tag 'qcom-arm64-fixes-for-6.1' of ↵Arnd Bergmann11-32/+67
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 DTS fixes for 6.1 This fixes the APCS register region on IPQ8074 to not overlap with adjacent nodes. It lists the valid LDO modes on a variety of platforms, as this is not required by the binding and implementation. The reference clocks for the two UFS instances on SC8280XP are corrected, to avoid relying on the state left by most versions of the bootloader. A number of issues are corrected with regards to the QMP PHY register ranges on SC8280XP. SC7280 gains a missing lpass reset region. Lastly cluster idle is termporarily disabled on SM8250 to avoid issues with booting the platform, until the last missing pieces lands. * tag 'qcom-arm64-fixes-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle state arm64: dts: qcom: sc7280: Add the reset reg for lpass audiocc on SC7280 arm64: dts: qcom: sc8280xp: fix UFS PHY serdes size arm64: dts: qcom: sc8280xp: drop broken DP PHY nodes arm64: dts: qcom: sc8280xp: fix USB PHY PCS registers arm64: dts: qcom: sc8280xp: fix USB1 PHY RX1 registers arm64: dts: qcom: sc8280xp: fix USB0 PHY PCS_MISC registers arm64: dts: qcom: sc8280xp: correct ref clock for ufs_mem_phy arm64: dts: qcom: sc8280xp: fix ufs_card_phy ref clock arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed arm64: dts: qcom: sm8250-xperia-edo: Specify which LDO modes are allowed arm64: dts: qcom: sm8150-xperia-kumano: Specify which LDO modes are allowed arm64: dts: qcom: sc8280xp-crd: Specify which LDO modes are allowed arm64: dts: qcom: sa8295p-adp: Specify which LDO modes are allowed arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed Revert "arm64: dts: qcom: msm8996: add missing TCSR syscon compatible" arm64: dts: qcom: ipq8074: correct APCS register space size Link: https://lore.kernel.org/r/20221110040635.795921-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-11arm64: dts: imx93-pinfunc: drop execution permissionPeng Fan1-0/+0
Drop the header file execution permission Signed-off-by: Peng Fan <peng.fan@nxp.com> Fixes: ec8b5b5058ea ("arm64: dts: freescale: Add i.MX93 dtsi support") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11arm64: dts: imx8mn: Fix NAND controller size-cellsMarek Vasut1-1/+1
The NAND controller size-cells should be 0 per DT bindings. Fix the following warning produces by DT bindings check: " nand-controller@33002000: #size-cells:0:0: 0 was expected nand-controller@33002000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) " Fixes: 6c3debcbae47a ("arm64: dts: freescale: Add i.MX8MN dtsi support") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11arm64: dts: imx8mm: Fix NAND controller size-cellsMarek Vasut1-2/+2
The NAND controller size-cells should be 0 per DT bindings. Fix the following warning produces by DT bindings check: " nand-controller@33002000: #size-cells:0:0: 0 was expected nand-controller@33002000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) " Fix the missing space in node name too. Fixes: a05ea40eb384e ("arm64: dts: imx: Add i.mx8mm dtsi support") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DRAlexander Stein1-6/+26
Using extcon USB host mode works properly on DR interface, e.g. enabling/disabling VBUS. But USB device mode is not working. Fix this by switching to usb-role-switch instead. Fixes: dfcd1b6f7620 ("arm64: dts: freescale: add initial device tree for TQMa8MQML with i.MX8MM") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-02Merge tag 'juno-fix-6.1' of ↵Arnd Bergmann1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Armv8 Juno fix for v6.1 Just a single fix to add the missing critical points in the thermal zones that has been mandatory in the binding but was enforced in the code recently. * tag 'juno-fix-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: juno: Add thermal critical trip points Link: https://lore.kernel.org/r/20221102140156.2758137-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-01arm64: dts: juno: Add thermal critical trip pointsCristian Marussi1-0/+14
When thermnal zones are defined, trip points definitions are mandatory. Define a couple of critical trip points for monitoring of existing PMIC and SOC thermal zones. This was lost between txt to yaml conversion and was re-enforced recently via the commit 8c596324232d ("dt-bindings: thermal: Fix missing required property") Cc: Rob Herring <robh+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: devicetree@vger.kernel.org Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Fixes: f7b636a8d83c ("arm64: dts: juno: add thermal zones for scpi sensors") Link: https://lore.kernel.org/r/20221028140833.280091-8-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-10-29arm64: dts: ls208xa: specify clock frequencies for the MDIO controllersIoana Ciornei1-0/+6
Up until now, the external MDIO controller frequency values relied either on the default ones out of reset or on those setup by u-boot. Let's just properly specify the MDC frequency in the DTS so that even without u-boot's intervention Linux can drive the MDIO bus. Fixes: 0420dde30a90 ("arm64: dts: ls208xa: add the external MDIO nodes") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-29arm64: dts: ls1088a: specify clock frequencies for the MDIO controllersIoana Ciornei1-0/+6
Up until now, the external MDIO controller frequency values relied either on the default ones out of reset or on those setup by u-boot. Let's just properly specify the MDC frequency in the DTS so that even without u-boot's intervention Linux can drive the MDIO bus. Fixes: bbe75af7b092 ("arm64: dts: ls1088a: add external MDIO device nodes") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-29arm64: dts: lx2160a: specify clock frequencies for the MDIO controllersIoana Ciornei1-0/+6
Up until now, the external MDIO controller frequency values relied either on the default ones out of reset or on those setup by u-boot. Let's just properly specify the MDC frequency in the DTS so that even without u-boot's intervention Linux can drive the MDIO bus. Fixes: 6e1b8fae892d ("arm64: dts: lx2160a: add emdio1 node") Fixes: 5705b9dcda57 ("arm64: dts: lx2160a: add emdio2 node") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-29arm64: dts: imx93: correct gpio-rangesPeng Fan1-4/+5
Per imx93-pinfunc.h and pinctrl-imx93.c, correct gpio-ranges. Fixes: ec8b5b5058ea ("arm64: dts: freescale: Add i.MX93 dtsi support") Reported-by: David Wolfe <david.wolfe@nxp.com> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-29arm64: dts: imx93: correct s4mu interrupt namesPeng Fan1-1/+1
Per binding doc, interrupt names should be tx and rx. Fixes: 0dfb380d2492 ("arm64: dts: imx93: add s4 mu node") Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-29arm64: dts: imx8: correct clock orderPeng Fan1-9/+9
Per bindings/mmc/fsl-imx-esdhc.yaml, the clock order is ipg, ahb, per, otherwise warning: " mmc@5b020000: clock-names:1: 'ahb' was expected mmc@5b020000: clock-names:2: 'per' was expected " Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding") Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-29arm64: dts: imx8mn: Correct the usb power domainLi Jun1-1/+2
pgc_otg1 is actual the power domain of usb PHY, usb controller is in hsio power domain, and pgc_otg1 is required to be powered up to detect usb remote wakeup, so move the pgc_otg1 power domain to the usb phy node. Fixes: ea2b5af58ab2 ("arm64: dts: imx8mn: put USB controller into power-domains") Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-29arm64: dts: imx8mn: remove otg1 power domain dependency on hsioLi Jun1-1/+0
pgc_otg1 is an independent power domain of hsio, it's for usb phy, so remove hsio power domain from its node. Fixes: 8b8ebec67360 ("arm64: dts: imx8mn: add GPC node") Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-29arm64: dts: imx8mm: correct usb power domainsLi Jun1-2/+4
pgc_otg1/2 is actual the power domain of usb PHY, usb controller is in hsio power domain, and pgc_otg1/2 is required to be powered up to detect usb remote wakeup, so move the pgc_otg1/2 power domain to the usb phy node. Fixes: 01df28d80859 ("arm64: dts: imx8mm: put USB controllers into power-domains") Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-29arm64: dts: imx8mm: remove otg1/2 power domain dependency on hsioLi Jun1-2/+0
pgc_otg1/2 are independent power domain of hsio, they for usb phy, so remove hsio power domain dependency from its node. Fixes: d39d4bb15310 ("arm64: dts: imx8mm: add GPC node") Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-29arm64: dts: verdin-imx8mp: fix ctrl_sleep_mociMax Krummenacher1-10/+10
The GPIO signaling ctrl_sleep_moci is currently handled as a gpio hog. But the gpio-hog node is made a child of the wrong gpio controller. Move it to the node representing gpio4 so that it actually works. Without this carrier board components jumpered to use the signal are unconditionally switched off. Fixes: a39ed23bdf6e ("arm64: dts: freescale: add initial support for verdin imx8m plus") Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-29arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle stateUlf Hansson1-0/+1
To support the deeper cluster idle state for sm8250 platforms, some additional synchronization is needed between the rpmh-rsc device and the CPU cluster PM domain. Until that is supported, let's disable the cluster idle state. This fixes a problem that has been reported for the Qcom RB5 platform (see below), but most likely other sm8250 platforms suffers from similar issues, so let's make the fix generic for sm8250. vreg_l11c_3p3: failed to enable: -ETIMEDOUT qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110 qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110 Reported-by: Amit Pundir <amit.pundir@linaro.org> Fixes: 32bc936d7321 ("arm64: dts: qcom: sm8250: Add cpuidle states") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Amit Pundir <amit.pundir@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221027115745.240516-1-ulf.hansson@linaro.org
2022-10-23arm64: dts: imx8mm: Enable CPLD_Dn pull down resistor on MX8MenloMarek Vasut1-8/+8
Enable CPLD_Dn pull down resistor instead of pull up to avoid intefering with CPLD power off functionality. Fixes: 510c527b4ff57 ("arm64: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-18arm64: dts: qcom: sc7280: Add the reset reg for lpass audiocc on SC7280Satya Priya1-1/+2
Add the reset register offset for clock gating. Fixes: 9499240d15f2 ("arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers") Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1663674495-25748-1-git-send-email-quic_c_skakit@quicinc.com
2022-10-18arm64: dts: qcom: sc8280xp: fix UFS PHY serdes sizeJohan Hovold1-2/+2
The size of the UFS PHY serdes register region is 0x1c8 and the corresponding 'reg' property should specifically not include the adjacent regions that are defined in the child node (e.g. tx and rx). Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> #Qdrive3/sa8540p-adp-ride Reviewed-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220915141601.18435-1-johan+linaro@kernel.org
2022-10-17arm64: dts: qcom: sc8280xp: drop broken DP PHY nodesJohan Hovold1-20/+0
The DP PHY register layout of the current binding do not apply to the newer USB4/USB3/DP PHY which uses a different register layout entirely. Drop the DP PHY subnodes until the binding has been updated to prevent the driver from corrupting unrelated registers. Note that this is also needed in order to not break USB with an upcoming PHY driver change that checks for overlapping register regions. Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220919094454.1574-5-johan+linaro@kernel.org
2022-10-17arm64: dts: qcom: sc8280xp: fix USB PHY PCS registersJohan Hovold1-2/+2
With the current binding, the PCS register block (0x1400) needs to include the PCS_USB registers (0x1700). Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220919094454.1574-4-johan+linaro@kernel.org
2022-10-17arm64: dts: qcom: sc8280xp: fix USB1 PHY RX1 registersJohan Hovold1-1/+1
The USB1 SS PHY node had the RX1 register block (0x600) replaced with RX2 (0xc00). Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220919094454.1574-3-johan+linaro@kernel.org
2022-10-17arm64: dts: qcom: sc8280xp: fix USB0 PHY PCS_MISC registersJohan Hovold1-1/+1
The USB0 SS PHY node had the PCS_MISC register block (0x1200) replaced with PCS_USB (0x1700). Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220919094454.1574-2-johan+linaro@kernel.org
2022-10-17arm64: dts: qcom: sc8280xp: correct ref clock for ufs_mem_phyBrian Masney1-1/+1
The first UFS host controller fails to start on the SA8540P automotive board (QDrive3) due to the following errors: ufshcd-qcom 1d84000.ufs: ufshcd_query_flag: Sending flag query for idn 18 failed, err = 253 ufshcd-qcom 1d84000.ufs: ufshcd_query_flag: Sending flag query for idn 18 failed, err = 253 ufshcd-qcom 1d84000.ufs: ufshcd_query_flag: Sending flag query for idn 18 failed, err = 253 ufshcd-qcom 1d84000.ufs: ufshcd_query_flag_retry: query attribute, opcode 5, idn 18, failed with error 253 after 3 retries The system eventually fails to boot with the warning: gcc_ufs_phy_axi_clk status stuck at 'off' This issue can be worked around by adding clk_ignore_unused to the kernel command line since the system firmware sets up this clock for us. Let's fix this issue by updating the ref clock on ufs_mem_phy. Note that the downstream MSM 5.4 sources list this as ref_clk_parent. With this patch, the SA8540P is able to be booted without clk_ignore_unused. Signed-off-by: Brian Masney <bmasney@redhat.com> Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Tested-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221006145529.755521-1-bmasney@redhat.com
2022-10-17arm64: dts: qcom: sc8280xp: fix ufs_card_phy ref clockJohan Hovold1-1/+1
The GCC_UFS_REF_CLKREF_CLK must be enabled or the second UFS controller fails to enumerate on sa8295p-adp. Note that the vendor kernel enables both GCC_UFS_REF_CLKREF_CLK and GCC_UFS_1_CARD_CLKREF_CLK and it is possible that the former should be modelled as a parent of the latter. The clock driver also has a GCC_UFS_CARD_CLKREF_CLK clock which the firmware appears to enable on the ADP. The usual lack of documentation for Qualcomm SoCs makes this a highly annoying guessing game, but as the second controller works on the ADP without either card reference clock enabled, only enable GCC_UFS_REF_CLKREF_CLK for now. Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221005143305.388-1-johan+linaro@kernel.org
2022-10-17arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowedDouglas Anderson1-0/+12
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs, but doesn't specify any modes with "regulator-allowed-modes". Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement get_optimum_mode(), not set_load()") the above meant that we were able to set either LPM or HPM mode. After that commit (and fixes [1]) we'll be stuck at the initial mode. Discussion of this has resulted in the decision that the old dts files were wrong and should be fixed to fully restore old functionality. Let's re-enable the old functionality by fixing the dts. [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid Fixes: 9208c19f2124 ("arm64: dts: qcom: Introduce SM8350 HDK") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220829094903.v2.6.I6799be85cf36d3b494f803cba767a569080624f5@changeid
2022-10-17arm64: dts: qcom: sm8250-xperia-edo: Specify which LDO modes are allowedDouglas Anderson1-0/+6
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs, but doesn't specify any modes with "regulator-allowed-modes". Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement get_optimum_mode(), not set_load()") the above meant that we were able to set either LPM or HPM mode. After that commit (and fixes [1]) we'll be stuck at the initial mode. Discussion of this has resulted in the decision that the old dts files were wrong and should be fixed to fully restore old functionality. Let's re-enable the old functionality by fixing the dts. [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid Fixes: 69cdb97ef652 ("arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform)") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220829094903.v2.5.Ie446d5183d8b1e9ec4e32228ca300e604e3315eb@changeid
2022-10-17arm64: dts: qcom: sm8150-xperia-kumano: Specify which LDO modes are allowedDouglas Anderson1-0/+6
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs, but doesn't specify any modes with "regulator-allowed-modes". Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement get_optimum_mode(), not set_load()") the above meant that we were able to set either LPM or HPM mode. After that commit (and fixes [1]) we'll be stuck at the initial mode. Discussion of this has resulted in the decision that the old dts files were wrong and should be fixed to fully restore old functionality. Let's re-enable the old functionality by fixing the dts. [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid Fixes: d0a6ce59ea4e ("arm64: dts: qcom: sm8150: Add support for SONY Xperia 1 / 5 (Kumano platform)") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220829094903.v2.4.I51d60414a42ba9e3008e208d60a04c9ffc425fa7@changeid
2022-10-17arm64: dts: qcom: sc8280xp-crd: Specify which LDO modes are allowedDouglas Anderson1-0/+6
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs, but doesn't specify any modes with "regulator-allowed-modes". Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement get_optimum_mode(), not set_load()") the above meant that we were able to set either LPM or HPM mode. After that commit (and fixes [1]) we'll be stuck at the initial mode. Discussion of this has resulted in the decision that the old dts files were wrong and should be fixed to fully restore old functionality. Let's re-enable the old functionality by fixing the dts. [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220829094903.v2.3.Ie7d2c50d2b42ef2d364f3a0c8e300e5ce1875b79@changeid
2022-10-17arm64: dts: qcom: sa8295p-adp: Specify which LDO modes are allowedDouglas Anderson1-0/+12
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs, but doesn't specify any modes with "regulator-allowed-modes". Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement get_optimum_mode(), not set_load()") the above meant that we were able to set either LPM or HPM mode. After that commit (and fixes [1]) we'll be stuck at the initial mode. Discussion of this has resulted in the decision that the old dts files were wrong and should be fixed to fully restore old functionality. Let's re-enable the old functionality by fixing the dts. [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid Fixes: 519183af39b2 ("arm64: dts: qcom: add SA8540P and ADP") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220829094903.v2.2.I430a56702ab0af65244e62667bb7743107de0c96@changeid
2022-10-17arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowedDouglas Anderson1-1/+12
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs, but doesn't specify any modes with "regulator-allowed-modes". Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement get_optimum_mode(), not set_load()") the above meant that we were able to set either LPM or HPM mode. After that commit (and fixes [1]) we'll be stuck at the initial mode. Discussion of this has resulted in the decision that the old dts files were wrong and should be fixed to fully restore old functionality. Let's re-enable the old functionality by fixing the dts. NOTE: while here, let's also remove the nonsensical "regulator-allow-set-load" on the fixed regulator "vreg_s4a_1p8". [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid Fixes: 5b85e8f2225c ("arm64: dts: qcom: sa8155p-adp: Add base dts file") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220829094903.v2.1.Id59c32b560c4662d8b3697de2bd494d08d654806@changeid
2022-10-17Revert "arm64: dts: qcom: msm8996: add missing TCSR syscon compatible"Dmitry Baryshkov1-1/+1
This reverts commit 8a99e0fc8bd3 ("arm64: dts: qcom: msm8996: add missing TCSR syscon compatible"). This commit marked the saw3 (syscon@9a10000) node as compatible with qcom,tcsr-msm8996. However the mentioned device is not not a TCSR (system registers, hardware mutex). It is a CPU power controller/regulator, which is currently being handled as a syscon. Fixes: 8a99e0fc8bd3 ("arm64: dts: qcom: msm8996: add missing TCSR syscon compatible") Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220921095258.2332568-1-dmitry.baryshkov@linaro.org
2022-10-17arm64: dts: qcom: ipq8074: correct APCS register space sizeRobert Marko1-1/+1
APCS DTS addition that was merged, was not supposed to get merged as it was part of patch series that was superseded by 2 more patch series that resolved issues with this one and greatly simplified things. Since it already got merged, start by correcting the register space size as APCS will not be providing regmap for PLL and it will conflict with the standalone A53 PLL node. Fixes: 50ed9fffec3a ("arm64: dts: qcom: ipq8074: add APCS node") Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220818220628.339366-8-robimarko@gmail.com
2022-10-08Merge tag 'clk-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have some late breaking reports that a patch series to rework clk rate range support broke boot on some devices, so I've left that branch out of this. Hopefully we can get to that next week, or punt on it and let it bake another cycle. That means we don't really have any changes to the core framework this time around besides a few typo fixes. Instead this is all clk driver updates and fixes. The usual suspects are here (again), with Qualcomm dominating the diffstat. We look to have gained support for quite a few new Qualcomm SoCs and Dmitry worked on updating many of the existing Qualcomm drivers to use clk_parent_data. After that we have MediaTek drivers getting some much needed updates, in particular to support GPU DVFS. There are also quite a few Samsung clk driver patches, but that's mostly because there was a maintainer change and so last release we missed some of those patches. Overall things look normal, but I'm slowly reviewing core framework code nowadays and that shows given the rate range patches had to be yanked last minute. Let's hope this situation changes soon. New Drivers: - Support for Renesas VersaClock7 clock generator family - Add Spreadtrum UMS512 SoC clk support - New clock drivers for MediaTek Helio X10 MT6795 - Display clks for Qualcomm SM6115, SM8450 - GPU clks for Qualcomm SC8280XP - Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers Deleted Drivers: - Remove DaVinci DM644x and DM646x clk driver support Updates: - Convert Baikal-T1 CCU driver to platform driver - Split reset support out of primary Baikal-T1 CCU driver - Add some missing clks required for RPiVid Video Decoder on RaspberryPi - Mark PLLC critical on bcm2835 - More devm helpers for fixed rate registration - Various PXA168 clk driver fixes - Add resets for MediaTek MT8195 PCIe and USB - Miscellaneous of_node_put() fixes - Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock - Convert gpio-clk-gate binding to YAML - Various fixes to AMD/Xilinx Zynqmp clk driver - Graduate AMD/Xilinx "clocking wizard" driver from staging - Add missing DPI1_HDMI clock in MT8195 VDOSYS1 - Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195 - Fix GPU clock topology on MT8195 - Propogate rate changes from GPU clock gate up the tree - Clock mux notifiers for GPU-related PLLs - Conversion of more "simple" drivers to mtk_clk_simple_probe() - Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers - Fixes to previous |struct clk| to |struct clk_hw| conversion on MediaTek - Shrink MT8192 clock driver by deduplicating clock parent lists - Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk' clocks for i.MX8MP - Drop unnecessary newline in i.MX8MM dt-bindings - Add more MU1 and SAI clocks dt-bindings Ids - Introduce slice busy bit check for i.MX93 composite clock - Introduce white list bit check for i.MX93 composite clock - Add new i.MX93 clock gate - Add MU1 and MU2 clocks to i.MX93 clock provider - Add SAI IPG clocks to i.MX93 clock provider - add generic clocks for U(S)ART available on SAMA5D2 SoCs - reset controller support for Polarfire clocks - .round_rate and .set rate support for clk-mpfs - code cleanup for clk-mpfs - PLL support for PolarFire SoC's Clock Conditioning Circuitry - Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car V4H - Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8 - Add I2C clocks and resets on RZ/V2M - Document clock support for the RZ/Five SoC - mux-variant clock using the table variant to select parents - clock controller for the rv1126 soc - conversion of rk3128 to yaml and relicensing of the yaml bindings to gpl2+MIT (following dt-binding guildelines) - Exynos7885: add FSYS, TREX and MFC clock controllers - Exynos850: add IS and AUD (audio) clock controllers with bindings - ExynosAutov9: add FSYS clock controllers with bindings - ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock controllers, due to duplicated entries. This is an acceptable ABI break: recently developed/added platform so without legacies, acked by known users/developers - ExynosAutov9: add few missing Peric 0/1 gates - ExynosAutov9: correct register offsets of few Peric 0/1 clocks - Minor code improvements (use of_device_get_match_data() helper, code style) - Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as he already maintainers that architecture/platform - Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving retention issues during suspend of USB on Qualcomm sc7180/sc7280 and SC8280XP - Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration - Qualcomm SDM660 SDCC1 moved to floor clk ops - Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018 was added/fixed - The Qualcomm MSM8996 CPU clocks are updated with support for ACD - Support for Qualcomm SDM670 GCC and RPMh clks was added - Transition to parent_data, parent_hws and use of ARRAY_SIZE() for num_parents was done for many Qualcomm SoCs - Support for per-reset defined delay on Qualcomm was introduced" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (283 commits) clk: qcom: gcc-sm6375: Ensure unsigned long type clk: qcom: gcc-sm6375: Remove unused variables clk: qcom: kpss-xcc: convert to parent data API clk: introduce (devm_)hw_register_mux_parent_data_table API clk: allow building lan966x as a module clk: clk-xgene: simplify if-if to if-else clk: ast2600: BCLK comes from EPLL clk: clocking-wizard: Depend on HAS_IOMEM clk: clocking-wizard: Use dev_err_probe() helper clk: nxp: fix typo in comment clk: pxa: add a check for the return value of kzalloc() clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975 dt-bindings: clock: vc5: Add 5P49V6975 clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe clk: Renesas versaclock7 ccf device driver dt-bindings: Renesas versaclock7 device tree bindings clk: ti: Balance of_node_get() calls for of_find_node_by_name() clk: imx: scu: fix memleak on platform_device_add() fails clk: vc5: Use regmap_{set,clear}_bits() where appropriate ...
2022-10-08Merge tag 'usb-6.1-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1. Nothing major in here, lots of little things with new devices supported and updates for a few drivers. Highlights include: - thunderbolt/USB4 devices supported a bit better than before, and some new ids to enable new hardware devices - USB gadget uvc updates for newer video formats and better v4l integration (the v4l portions were acked by those maintainers) - typec updates for tiny issues and more typec drivers for new chips. - xhci tiny updates for minor issues - big usb-serial ftdi_sio driver update to handle new devices better - lots of tiny dwc3 fixes and updates for the IP block that is showing up everywhere these days - dts updates for new devices being supported - other tiny janitorial and cleanups fixes for lots of different USB drivers. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: gadget: uvc: don't put item still in use usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video() usb: host: ehci-exynos: switch to using gpiod API Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present" Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"" dt-bindings: usb: Convert FOTG210 to dt schema usb: mtu3: fix failed runtime suspend in host only mode USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl" usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra usb: typec: Replace custom implementation of device_match_fwnode() usb: typec: ucsi: Don't warn on probe deferral usb: add quirks for Lenovo OneLink+ Dock MAINTAINERS: switch dwc3 to Thinh usb: idmouse: fix an uninit-value in idmouse_open USB: PHY: JZ4770: Switch to use dev_err_probe() helper usb: phy: generic: Switch to use dev_err_probe() helper usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs usb: cdns3: remove dead code usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair usb: musb: sunxi: Switch to use dev_err_probe() helper ...
2022-10-06Merge tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds293-2603/+21222
Pull ARM devicetree updates from Arnd Bergmann: "Most of the changes fall into one of three categories: adding support for additional devices on existing machines, cleaning up issues found by the ongoing conversion to machine-readable bindings, and addressing minor mistakes in the existing DT data. Across SoC vendors, Qualcomm and Freescale stick out as getting the most updates, which corresponds to their dominance in the mobile phone and embedded industrial markets, respectively. There are 636 non-merge changeset in this branch, which is a little lower than most times, but more importantly we only add 36 machine files, which is about half of what we had the past few releases. Eight new SoCs are added, but all of them are variations of already supported SoC families, and most of them come with one reference board design from the SoC vendor: - Mediatek MT8186 is a Chromebook/Tablet type SoC, similar to the MT65xx series of phone SoCs, with two Cortex-A76 and six Cortex-A55 cores. - TI AM62A is another member of the K3 family with Cortex-A53 cores, this one is targetted at Video/Vision processing for industrial and automotive applications. - NXP i.MX8DXL is another chip for this market in the ever-growing i.MX8 family, this one again with two Cortex-A35 cores. - Renesas R-Car H3Ne-1.7G (R8A779MB) and R-Car V3H2 (R8A77980A) are minor updates of R8A77951 and R8A77980, respectively. - Qualcomm IPQ8064-v2.0, IPQ8062 and IPQ8065 are all variants of the IPQ8064 chip, with minimally different features. The AMD Pensando Elba and Apple M1 Ultra SoC support was getting close this time, but in the end did not make the cut. The new machines based on existing SoC support are fairly uneventful: - Sony Xperia 1 IV is a fairly recent phone based on Qualcomm Snapdragon 8 Gen 1. - Three Samsung phones based on Snapdragon 410: Galaxy E5, E7 and Grand Max. These are added for both 32-bit and 64-bit kernels, as they originally shipped running 32-bit code. - Two new servers using AST2600 BMCs: AMD DaytonaX and Ampere Mt. Mitchell - Three new machines based on Rockchips RK3399 and RK3566: Anberic RG353P and RG503, Pine64 Pinephone Pro, Open AI Lab - Multiple NXP i.MX6/i.MX8 based boards: Kontron SL/BL i.MX8MM OSM-S, i.MX8MM Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board - Two development boards in the Microchip AT91 family: SAMA5D3-EDS and lan966x-pcb8290. - Minor variants of existing boards using Amlogic, Broadcom, Marvell, Rockchips, Freescale Layerscape and Socionext Uniphier SoCs" * tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (617 commits) Revert "ARM: dts: BCM5301X: Add basic PCI controller properties" ARM: dts: s5pv210: correct double "pins" in pinmux node ARM: dts: exynos: fix polarity of VBUS GPIO of Origen arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2 arm64: dts: uniphier: Add L2 cache node arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node arm64: dts: uniphier: Fix opp-table node name for LD20 arm64: dts: uniphier: Add USB-device support for PXs3 reference board arm64: dts: uniphier: Add ahci controller nodes for PXs3 arm64: dts: uniphier: Use GIC interrupt definitions arm64: dts: uniphier: Rename gpio-hog nodes arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller arm64: dts: uniphier: Rename pvtctl node to thermal-sensor ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card ARM: dts: uniphier: Add ahci controller nodes for PXs2 ARM: dts: uniphier: Add ahci controller nodes for Pro4 ARM: dts: uniphier: Use GIC interrupt definitions ARM: dts: uniphier: Rename gpio-hog node ...
2022-10-04Merge tag 'samsung-dt-dt64-6.1-2' of ↵Arnd Bergmann1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM and ARM64 changes for v6.1 Late cleanup and fixes for Samsung DTS: 1. Fix polarity of pins: - enable GPIO of NFC chip in Exynos5433 TM2 boards, - vbus GPIO of EHCI in Exynos4412 Origen board. 2. Correct name of pin configuration nodes - redundant "pins" in the name (no functional impact). * tag 'samsung-dt-dt64-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: s5pv210: correct double "pins" in pinmux node ARM: dts: exynos: fix polarity of VBUS GPIO of Origen arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2 Link: https://lore.kernel.org/r/20221003073916.12588-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-30Merge tag 'wireless-next-2022-09-30' of ↵Jakub Kicinski6-0/+22
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.1 Few stack changes and lots of driver changes in this round. brcmfmac has more activity as usual and it gets new hardware support. ath11k improves WCN6750 support and also other smaller features. And of course changes all over. Note: in early September wireless tree was merged to wireless-next to avoid some conflicts with mac80211 patches, this shouldn't cause any problems but wanted to mention anyway. Major changes: mac80211 - refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO) feature continues brcmfmac - support CYW43439 SDIO chipset - support BCM4378 on Apple platforms - support CYW89459 PCIe chipset rtw89 - more work to get rtw8852c supported - P2P support - support for enabling and disabling MSDU aggregation via nl80211 mt76 - tx status reporting improvements ath11k - cold boot calibration support on WCN6750 - Target Wake Time (TWT) debugfs support for STA interface - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - implement SRAM dump debugfs interface - enable threaded NAPI on all hardware - WoW support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz wcn36xx - add SNR from a received frame as a source of system entropy * tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits) wifi: rtl8xxxu: Improve rtl8xxxu_queue_select wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM wifi: rtl8xxxu: gen2: Enable 40 MHz channel width wifi: rtw89: 8852b: configure DLE mem wifi: rtw89: check DLE FIFO size with reserved size wifi: rtw89: mac: correct register of report IMR wifi: rtw89: pci: set power cut closed for 8852be wifi: rtw89: pci: add to do PCI auto calibration wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf wifi: rtw89: add DMA busy checking bits to chip info wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels wifi: rtw89: pci: mask out unsupported TX channels iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper wifi: iwlwifi: Track scan_cmd allocation size explicitly brcmfmac: Remove the call to "dtim_assoc" IOVAR brcmfmac: increase dcmd maximum buffer size brcmfmac: Support 89459 pcie brcmfmac: increase default max WOWL patterns to 16 cw1200: fix incorrect check to determine if no element is found in list ... ==================== Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-30arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2Dmitry Torokhov1-1/+1
According to s3fwrn5 driver code the "enable" GPIO line is driven "high" when chip is not in use (mode is S3FWRN5_MODE_COLD), and is driven "low" when chip is in use. s3fwrn5_phy_power_ctrl(): ... gpio_set_value(phy->gpio_en, 1); ... if (mode != S3FWRN5_MODE_COLD) { msleep(S3FWRN5_EN_WAIT_TIME); gpio_set_value(phy->gpio_en, 0); msleep(S3FWRN5_EN_WAIT_TIME); } Therefore the line described by "en-gpios" property should be annotated as "active low". The wakeup gpio appears to have correct polarity (active high). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20220929011557.4165216-1-dmitry.torokhov@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-09-30arm64: dts: mediatek: mt2712e: Update the name of property 'clk_csr'Jianguo Zhang1-1/+1
Update the name of property 'clk_csr' as 'snps,clk-csr' to align with the property name in the binding file. Signed-off-by: Jianguo Zhang <jianguo.zhang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski21-46/+63
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28Merge branch 'uniphier/dt' into arm/dtArnd Bergmann10-104/+306
Updates from Kunihiko Hayashi via email: "Update devicetree sources for UniPhier armv8 SoCs to remove dtschema warnings, add support existing features that haven't yet been described, and replace constants with macros." * uniphier/dt: arm64: dts: uniphier: Add L2 cache node arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node arm64: dts: uniphier: Fix opp-table node name for LD20 arm64: dts: uniphier: Add USB-device support for PXs3 reference board arm64: dts: uniphier: Add ahci controller nodes for PXs3 arm64: dts: uniphier: Use GIC interrupt definitions arm64: dts: uniphier: Rename gpio-hog nodes arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller arm64: dts: uniphier: Rename pvtctl node to thermal-sensor ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card ARM: dts: uniphier: Add ahci controller nodes for PXs2 ARM: dts: uniphier: Add ahci controller nodes for Pro4 ARM: dts: uniphier: Use GIC interrupt definitions ARM: dts: uniphier: Rename gpio-hog node ARM: dts: uniphier: Rename usb-glue node for USB3 to usb-controller ARM: dts: uniphier: Rename usb-phy node for USB2 to usb-controller ARM: dts: uniphier: Rename pvtctl node to thermal-sensor
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-14 05:26:52 +0300