summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/xilinx
AgeCommit message (Collapse)AuthorFilesLines
2023-06-05arm64: zynqmp: Used fixed-partitions for QSPI in k26Michal Simek1-81/+88
Using fixed partitions is recommended way how to describe QSPI. Also add label for qspi flash memory to be able to reference it in future. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/7368dc772d8dc29477a880ac2065e2ecb98cf3f5.1684767562.git.michal.simek@amd.com
2023-06-05arm64: zynqmp: Add pmu interrupt-affinityRadhey Shyam Pandey1-0/+4
Based on dt-binding "This property should present when there is more than a single SPI" that's also case that's why explicitly specify interrupt affinity to avoid incorrect usage. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/dde2e4b5ac6018adb9bfae05bb3800af6b7c0f0e.1684767562.git.michal.simek@amd.com
2023-06-05arm64: zynqmp: Set qspi tx-buswidth to 4Amit Kumar Mahapatra11-11/+11
All ZynqMP boards are setting up tx-buswidth to 1. Due to this the framework only issues 1-1-1 write commands to the GQSPI driver. But the GQSPI controller is capable of handling 1-4-4 write commands, so updated the tx-buswidth to 4. Using all 4 lines will increase the tx data transfer rate, as now the tx data will be transferred on four lines instead on single line. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/1f1b0028106d83aa06e0777e91862a07df100fa1.1684767562.git.michal.simek@amd.com
2023-06-05arm64: zynqmp: Fix usb node drive strength and slew rateAshok Reddy Soma10-18/+54
As per design, all input/rx pins should have fast slew rate and 12mA drive strength. Rest all pins should be slow slew rate and 4mA drive strength. Fix usb nodes as per this and remove setting of slow slew rate for all the usb group pins. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/379071f44ceb27a0e32d74e13221640922d989d1.1684767562.git.michal.simek@amd.com
2023-06-05arm64: zynqmp: Describe TI phy as ethernet-phy-idMichal Simek6-46/+90
TI DP83867 is using strapping based on MIO pins. Tristate setup can influence PHY address. That's why switch description with ethernet-phy-id compatible string which enable calling reset. PHY itself setups phy address after power up or reset. Phy reset is done via gpio. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/b49904649a363f40dc9c4d3fa275e42129562082.1684767562.git.michal.simek@amd.com
2023-06-05arm64: zynqmp: Switch to amd.com emailsMichal Simek24-27/+27
Update my and DPs email address to match current setup. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/108cbbbab29e13d386d38a779fd582f10844a030.1685443337.git.michal.simek@amd.com
2023-06-05arm64: zynqmp: Convert kv260-revA overlay to ASCII textMichal Simek1-3/+3
File was in UTF-8 format but there is no reason for it. Convert it to ASCII/plain text. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/9161f4e1d449edd86e642b6769575b8e201fccf0.1684244418.git.michal.simek@amd.com
2023-05-16arm64: xilinx: Use zynqmp prefix for SOM dt overlaysMichal Simek1-8/+8
U-Boot is using zynqmp- prefix to compose DT name for board detection that's why also generate DT in this format in the kernel. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/49c1b8c992929610ba17b9c6edf5d40d4b28d2ed.1683033163.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Add phase tags markingMichal Simek3-0/+21
bootph-all as phase tag was added to dt-schema (dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT. That's why add it also to Linux to be aligned with bootloader requirement. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/48b554aef75d11e6ad2ef7d21f22accb35432112.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Describe bus-width for SD card on KV260Michal Simek2-0/+2
SD card is connected with 4 data lines which should be described properly. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/b4046d2f593047400c190e438fd9d05128c293d9.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Enable AMS on SOM and other zcu10x boardsMichal Simek5-0/+79
AMS is used for monitoring system. Used for measuring voltages and especially temperatures. Origin interface is IIO but via iio-hwmon it can be moved to hwmon framework too (done for SOM and zcu100). Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/e1e1621ac1cee7f36ef20606bb3795e130de9609.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Enable DP driver for SOMsMichal Simek2-2/+2
DP DMA is already enabled that's why there is no reason to keep DP disabled. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/15d16b4de933bfae108df6ca368eb2cdf916aa02.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Setup clock for DP and DPDMAMichal Simek3-0/+8
Clocks are coming from shared HW design where these frequencies should be aligned with PLL setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/807e22371394222f728ff7d6b190a96a12145439.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Switch to ethernet-phy-id in kv260Michal Simek2-4/+8
Use ethernet-phy-id compatible string to properly describe phy reset on kv260 boards. Previous description wasn't correct because reset was done for mdio bus to operate and it was in this case used for different purpose which was eth phy reset. With ethernet-phy-id phy reset happens only for the phy via phy framework. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/4b139e942c2a808eecbb30226b6ea5303348390a.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2Piyush Mehta1-2/+0
The board zynqmp-zc1751-xm016-dc2 support only USB2.0 that's why remove USB3.0 DT configuration. Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/ad019501a851c5730427af948b636316f10b2e3b.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Add pinctrl emmc description to SM-K26Michal Simek1-0/+20
Production SOM has emmc on it and make sense to describe pin description to be able use EMMC if it is not configured via psu_init. (Still some regs are not handled but this is one step in that direction) Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/f61c16e2fd7c91c2be6d6b67c902037580dbd364.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Add gpio labels for modepin gpioMichal Simek1-0/+4
Using label helps with better chip identification. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/12b2fcd94e528c8ca7117f6741aae36b5942b430.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Add mtd partition for secure OS storage areaAmit Kumar Mahapatra1-4/+8
Update MTD partitions of Kria device trees to allocate 128KB of QSPI memory for secure OS. Increased "SHA256" partition size & changed starting address of "User" partition to accommodate the new partition "Secure OS Storage" Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20dd23821118999c6fec2bad52ea446d1a66fefb.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Use assigned-clock-rates for setting up SD clock in SOMMichal Simek4-1/+7
With limited low level configuration done via psu-init only IPs connected on SOM are initialized and configured. All IPs connected to carrier card are not initialized. There is a need to do proper reset, pin configuration and also clock setting. The patch targets the last part which is setting up proper clock for EMMC on production SOMs and SD on kv260-revB. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/cf5a4e412e1674500a71a0b1eed7fa8393f37ae9.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Add linux,code for gpio buttonSrinivas Neeli1-0/+3
BTN_MISC looks like the most reasonable option for this button. Button is used by firmware to indicate (after reset, power up) that user wants to do firmware upgrade via firmware update utility. For bootloader or OS is this just user button which is worth to have it mapped. Also button can be used as a wakeup source and pressing it for more time can generate more chars that's why also adding wakeup-source and autorepeat properties. Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/4e20661f43b1fb8432fa5fcda5c1cb50d0a27475.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Add dmas, dp, rtc, watchdogs and opp nodes for SOMMichal Simek1-0/+95
There are couple of IPs which are enabled in origin HW design which are missing in SOM dt. Add them to match default setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/5d3777fdf91d114effe1921255a7ad71ef30d277.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Fix usb reset over bootmode pins on zcu100Michal Simek1-0/+2
The commit 53ba1b2bdaf7 ("arm64: dts: zynqmp: Add mode-pin GPIO controller DT node") added usb phy reset over bootmode pins by default on usb0 only. zcu100 is using usb0 as peripheral and usb1 as host. Unfortunately reset line is shared for both usb ulpi phys but usb_rst_b is connected to usb5744 hub which is used only in host mode. Especially this chip requires reset to operate properly that's why better assign gpio reset to usb1 instead of usb0. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/d117473da3bab39a82fe900cecd8ca78df9adeda.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Sync node name address with reg (mailbox)Michal Simek1-1/+1
Address in node name should match with the first reg property in DT. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/5d8e80383912b8ff75409764efb75f3b85917087.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Add resets property to sdhci nodesSai Krishna Potthuri1-0/+2
Add "resets" property to sdhci nodes. Resets property is used to reset the SD host controller when dynamic configuration support is enabled. Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/8f8592d6454c024c8f8b92e56c9009c65ad1d54a.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Rename ams_ps/pl node namesMichal Simek1-2/+2
Fix child node names to be aligned with commit 39dd2d1e251d ("dt-bindings: iio: adc: Add Xilinx AMS binding documentation") which requires names as ams-ps@ and ams-pl@. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/373136eccf8d22cdfb499adbc8d5f5510d6c1035.1683034376.git.michal.simek@amd.com
2023-05-12Revert "arm64: dts: zynqmp: Add address-cells property to interrupt controllers"Michal Simek1-2/+0
This reverts commit c6badbd2d321c19d4f55ee56b0ef12bb3352feac. Long time ago this was discussed with Rob at link below that there is no need to add address-cells to gpio and interrupt nodes that's why reverting this patch for ZynqMP. Also there is no visible DTC warning which was seen in past. Link: https://lore.kernel.org/r/91e3405245c89f134676449cf3822285798d2ed2.1612189652.git.michal.simek@xilinx.com Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/e3312910db0922bb8c24a8e681de41709ca11bdf.1683035456.git.michal.simek@amd.com
2023-05-12arm64: zynqmp: Change zc1275 board name to zcu1275Michal Simek2-3/+3
Internal board zc1275 was released also to public which ends up with adding missing 'u' to board name. Reflect this change by renaming DT files. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/9b50c72c4e634b2c72758eed6275920eedbda06f.1683099606.git.michal.simek@amd.com
2023-05-12arm64: zynqmp: Add mali-400 gpu node for zynqmpParth Gajjar11-0/+51
Add mali-400 gpu node for zynqmp. Enabled gpu node for xilinx boards. Signed-off-by: Parth Gajjar <parth.gajjar@amd.com> Signed-off-by: Vishal Sagar <vishal.sagar@amd.com> Link: https://lore.kernel.org/r/20230321070619.29440-3-parth.gajjar@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-01-19arm64: dts: zynqmp: Add xlnx prefix to GEM compatible stringHarini Katakam1-4/+4
cdns,zynq/zynqmp/versal-gem was recently deprecated in Linux in favour of xlnx prefix. Add this new compatible string and remove the existing cdns,zynqmp-gem compatible string. Signed-off-by: Harini Katakam <harini.katakam@amd.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/578a4fcbb4143888af954996a45f5e1110e0ee50.1672909426.git.michal.simek@amd.com
2023-01-05arm64: dts: zynqmp: Remove clock-names from GEM in zynqmp-clk-ccf.dtsiMichal Simek2-8/+4
Remove clock-names from GEM nodes from clk-ccf because they should be only present in zynqmp.dtsi. And as is visible both clock-names defined didn't really match. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/24ce27f91a55ed04ca7ee2ff7db0c674702ef722.1670594284.git.michal.simek@amd.com
2023-01-05arm64: dts: zynqmp: Add mode-pin GPIO controller DT nodePiyush Mehta1-0/+8
Add mode-pin GPIO controller DT node in zynqmp.dtsi and wire it to usb0 controller. All Xilinx evaluation boards are using modepin gpio for ULPI reset that's why wire it directly in zynqmp instead of c&p the same line to every board specific file. Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/69924a8e2c01e5a1d25d098adc53224ddb841f46.1670594085.git.michal.simek@amd.com
2023-01-05arm64: zynqmp: Enable hs termination flag for USB dwc3 controllerMichael Grzeschik1-0/+2
Since we need to support legacy phys with the dwc3 controller, we enable this quirk on the zynqmp platforms. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20221023215649.221726-1-m.grzeschik@pengutronix.de Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-01-05arm64: dts: xilinx: Rename DTB overlay source files from .dts to .dtsoAndrew Davis2-0/+0
DTB Overlays (.dtbo) can now be built from source files with the extension (.dtso). This makes it clear what is the content of the files and differentiates them from base DTB source files. Convert the DTB overlay source files in the arm64/xilinx directory. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20221024173434.32518-7-afd@ti.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-01-05arm64: xilinx: Fix opp-table-cpuMichal Simek1-1/+1
OPP table name now should start with "opp-table" and OPP entries shouldn't contain commas and @ signs in accordance to the new schema requirement. The same change was done by commit c6d4a8977598 ("ARM: tegra: Rename CPU and EMC OPP table device-tree nodes"), commit ffbe853a3f5a ("ARM: dts: sunxi: Fix OPPs node name") or commit b7072cc5704d ("arm64: dts: qcom: qcs404: Rename CPU and CPR OPP tables"). Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/3297772b58953e4afd91f7a4bd845713e36e1e27.1652713489.git.michal.simek@amd.com
2023-01-05arm64: dts: xilinx: align LED node names with dtschemaKrzysztof Kozlowski1-1/+1
The node names should be generic and DT schema expects certain pattern: xilinx/zynqmp-zcu100-revC.dtb: leds: 'vbus-det' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221125144136.477171-1-krzysztof.kozlowski@linaro.org Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-21Merge tag 'rproc-v6.2' of ↵Linus Torvalds1-0/+33
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "rproc-virtio device names are now auto generated, to avoid conflicts between remoteproc instances. The imx_rproc driver is extended with support for communicating with and attaching to a running M4 on i.MX8QXP, as well as support for attaching to the M4 after self-recovering from a crash. Support is added for i.MX8QM and mailbox channels are reconnected during the recovery process, in order to avoid data corruption. The Xilinx Zynqmp firmware interface is extended and support for the Xilinx R5 RPU is introduced. Various resources leaks, primarily in error paths, throughout the Qualcomm drivers are corrected. Lastly a fix to ensure that pm_relax is invoked even if the remoteproc instance is stopped between a crash is being reported and the recovery handler is scheduled" * tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits) remoteproc: core: Do pm_relax when in RPROC_OFFLINE state remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on() remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region() remoteproc: qcom_q6v5_pas: detach power domains on remove remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio() remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev() remoteproc: sysmon: Make QMI message rules const drivers: remoteproc: Add Xilinx r5 remoteproc driver firmware: xilinx: Add RPU configuration APIs firmware: xilinx: Add shutdown/wakeup APIs firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration. arm64: dts: xilinx: zynqmp: Add RPU subsystem device node dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings remoteproc: core: Use device_match_of_node() remoteproc: imx_rproc: Correct i.MX93 DRAM mapping remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP remoteproc: imx_rproc: Request mbox channel later remoteproc: imx_rproc: Support i.MX8QM remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP ...
2022-11-25arm64: dts: xilinx: zynqmp: Add RPU subsystem device nodeTanmay Shah1-0/+33
RPU subsystem can be configured in cluster-mode or split mode. Also each r5 core has separate power domains. Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20221114233940.2096237-3-tanmay.shah@amd.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2022-10-21arm64: dts: zynqmp: zcu106a: Describe DisplayPort connectorLaurent Pinchart1-0/+20
Add a device tree node to describe the DisplayPort connector, and connect it to the DPSUB output. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Michal Simek <michal.simek@amd.com>
2022-10-21arm64: dts: zynqmp: Add ports for the DisplayPort subsystemLaurent Pinchart1-0/+24
The DPSUB DT bindings now specify ports to model the connections with the programmable logic and the DisplayPort output. Add them to the device tree. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Michal Simek <michal.simek@amd.com>
2022-06-23arm64: dts: xilinx: align gpio-key node names with dtschemaKrzysztof Kozlowski5-5/+5
The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220616005333.18491-30-krzysztof.kozlowski@linaro.org Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-23arm64: dts: zynqmp: add AMS driver to device treeRobert Hancock2-0/+30
Add an entry to the ZynqMP device tree to support the AMS device which now has a driver in mainline. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Link: https://lore.kernel.org/r/20220120010246.3794962-2-robert.hancock@calian.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-06-23arm64: zynqmp: Fix comment about number of gpio line namesMichal Simek1-1/+1
ZynqMP has 174 gpio lines connected to PS controller but DT is describing them from 0 to 173 not 174. Fixes: 7a4c31ee877a ("arm64: zynqmp: Add support for Xilinx Kria SOM board") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/c3480ba47ac9761903485ebfac127f297053d4da.1634289461.git.michal.simek@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-03-26Merge tag 'usb-5.18-rc1' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 5.18-rc1. Nothing major in here, just lots of little improvements and cleanups and new device support. Highlights are: - list iterator fixups for when we walk past the end of the list (a common problem that was cut/pasted in almost all USB gadget drivers) - xen USB driver "hardening" for malicious hosts - xhci driver updates and fixes for more hardware types - xhci debug cable fixes to make it actually work again - usb gadget audio driver improvements - usb gadget storage fixes to work with OS-X - lots of other small usb gadget fixes and updates - USB DWC3 driver improvements for more hardware types - Lots of other small USB driver improvements - DTS updates for some USB platforms All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue() dt-bindings: usb: mtk-xhci: add compatible for mt8186 usb: dwc3: Issue core soft reset before enabling run/stop usb: gadget: Makefile: remove ccflags-y USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c usb: gadget: eliminate anonymous module_init & module_exit usb: usbip: eliminate anonymous module_init & module_exit xen/usb: harden xen_hcd against malicious backends usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue usb: dwc3: gadget: move cmd_endtransfer to extra function usb: dwc3: gadget: ep_queue simplify isoc start condition xen/usb: don't use arbitrary_virt_to_machine() usb: isp1760: remove redundant max_packet() macro usb: oxu210hp-hcd: remove redundant call to max_packet() macro usb: common: usb-conn-gpio: Make VBUS supply completely optional USB: storage: ums-realtek: fix error code in rts51x_read_mem() usb: early: xhci-dbc: Fix xdbc number parsing usb: early: xhci-dbc: Remove duplicate keep parsing x86/tsc: Be consistent about use_tsc_delay() usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body ...
2022-03-24Merge tag 'net-next-5.18' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...
2022-02-08arm64: dts: zynqmp: Move USB clocks to dwc3 nodeSean Anderson2-4/+4
These clocks are not used by the dwc3-xilinx driver except to enable/disable them. Move them to the dwc3 node so its driver can use them to configure the reference clock period. Tested-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127200636.1456175-7-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-29arm64: dts: zynqmp: Added GEM reset definitionsRobert Hancock1-0/+8
The Cadence GEM/MACB driver now utilizes the platform-level reset on the ZynqMP platform. Add reset definitions to the ZynqMP platform device tree to allow this to be used. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-24arm64: zynqmp: Rename dma to dma-controllerMichael Tretter1-16/+16
The ZynqMP dma engines are actually dma-controllers as specified by the device tree binding. Rename the device tree nodes accordingly. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Link: https://lore.kernel.org/r/20220112151541.1328732-4-m.tretter@pengutronix.de Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-24arm64: zynqmp: Add missing #dma-cells propertyMichael Tretter1-0/+16
Requesting the dma controllers fails if #dma-cells is not defined. Add the missing property. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Link: https://lore.kernel.org/r/20220112151541.1328732-3-m.tretter@pengutronix.de Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-01-24arm64: xilinx: dts: drop legacy property #stream-id-cellsDavid Heidelberg1-28/+0
Property #stream-id-cells is legacy leftover and isn't currently documented nor used. Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20211208184846.101166-1-david@ixit.cz Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-09-29arm64: zynqmp: Add support for Xilinx Kria SOM boardMichal Simek5-0/+936
There are couple of revisions of SOMs (k26) and associated carrier cards (kv260). SOM itself has two major versions: sm-k26 - SOM with EMMC smk-k26 - SOM without EMMC used on starter kit with preprogrammed firmware in QSPI. SOMs are describing only devices available on the SOM or connections which are described in specification (for example UART, fwuen). When SOM boots out of QSPI it uses limited number of peripherals defined by the specification and present in sm(k)-k26 dtses. Then a carrier card (CC) detection is happening and DT overlay is applied to brings new functionality. That's why DT overlays are used. The name is composed together with SOM name and CC name that's why DT overlays with these names are generated to make sure they can be used together. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1ba32590670434b650bacf6410a65579dd30b38b.1632294439.git.michal.simek@xilinx.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-01 12:08:48 +0300