summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/renesas/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2021-01-11arm64: dts: renesas: r8a774e1: Introduce beacon-rzg2h-kitAdam Ford1-0/+1
Beacon EmbeddedWorks is introducing a new kit based on the RZ/G2H SoC from Renesas. The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1 cellular radio. The Baseboard has Ethernet, USB, HDMI, stereo audio in and out, along with a variety of push buttons and LED's, and support for a parallel RGB and an LVDS display. It uses the same baseboard and SOM files as the RZ/G2M and RZ/G2N kits. Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20201224170502.2254683-8-aford173@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-11arm64: dts: renesas: r8a774b1: Introduce beacon-rzg2n-kitAdam Ford1-0/+1
Beacon EmbeddedWorks is introducing a new kit based on the RZ/G2N SoC from Renesas. The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1 cellular radio. The Baseboard has Ethernet, USB, HDMI, stereo audio in and out, along with a variety of push buttons and LED's, and support for a parallel RGB and an LVDS display. It uses the same baseboard and SOM as the RZ/G2M. This SOM has only 2GB of DDR, and beacon-renesom-som.dtsi contains the base memory node, so an additional memory node isn't necessary. Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20201224170502.2254683-7-aford173@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-11-10arm64: dts: renesas: r8a77961: ulcb-kf: Initial device treeEugeniu Rosca1-0/+1
Create a dedicated DTB for M3-ES3.0 + ULCB + Kingfisher combo. Inspire from the pre-existing ULCB-KF device trees: $ ls -1 arch/arm64/boot/dts/renesas/*ulcb-kf.dts arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20201029133741.25721-2-erosca@de.adit-jv.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-10-26arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope ↵Lad Prabhakar1-0/+1
RZ/G2N Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope RZ/G2N board. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20201020125134.22625-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-10-26arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope ↵Lad Prabhakar1-0/+1
RZ/G2M Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope RZ/G2M board. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20201020125134.22625-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-10-26arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope ↵Lad Prabhakar1-0/+1
RZ/G2H Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope RZ/G2H board. Common file hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi is created which will be used by RZ/G2{HMN}, by default the CSI20 node is tied to ov5645 camera endpoint and the imx219 camera endpoint is tied to CSI40. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20201020125134.22625-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-10arm64: dts: renesas: Add Renesas Falcon boards supportYoshihiro Shimoda1-0/+2
Initial support for the Renesas Falcon CPU and BreakOut boards support. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1599739372-30669-5-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-04arm64: dts: renesas: Add HiHope RZ/G2H board with idk-1110wr displayLad Prabhakar1-0/+1
The HiHope RZ/G2H is advertised as compatible with panel idk-1110wr from Advantech, however the panel isn't sold alongside the board. New dts, enabling the lvds node to get the panel to work with HiHope RZ/G2H. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20200827181918.30130-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-17arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kitAdam Ford1-0/+1
Beacon EmebeddedWorks, formerly Logic PD is introducing a new SOM and development kit based on the RZ/G2M SoC from Renesas. The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1 cellular radio. The Baseboard has Ethernet, USB, HDMI, stereo audio in and out, along with a variety of push buttons and LED's, and support for a parallel RGB and an LVDS display. Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20200715140622.1295370-1-aford173@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-17arm64: dts: renesas: Add HiHope RZ/G2H sub board supportMarian-Cristian Rotariu1-0/+1
The HiHope RZ/G2H sub board sits below the HiHope RZ/G2H main board. These boards are identical with the ones for RZ/G2M[N]. Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1594230511-24790-9-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-17arm64: dts: renesas: Add HiHope RZ/G2H main board supportMarian-Cristian Rotariu1-0/+2
Basic support for the HiHope RZ/G2H main board: - Memory, - Main crystal, - Serial console - eMMC Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1594230511-24790-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-16arm64: dts: renesas: Restructure MakefileGeert Uytterhoeven1-24/+45
Make the Makefile for building Renesas DTB files easier to read and maintain: - Get rid of line continuations, - Use a single entry per line, - Sort SoCs and boards alphabetically, - Separate SoCs by blank lines. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200706154015.29257-1-geert+renesas@glider.be
2020-06-26arm64: dts: renesas: Add HiHope RZ/G2N Rev2.0/3.0/4.0 board with idk-1110wr ↵Lad Prabhakar1-0/+2
display The HiHope RZ/G2N variants are advertised as compatible with panel idk-1110wr from Advantech, however the panel isn't sold alongside the board. New dts's, enabling the lvds node to get the panel to work with all the HiHope RZ/G2N variants. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-12-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-26arm64: dts: renesas: Add HiHope RZ/G2N Rev.3.0/4.0 sub board supportLad Prabhakar1-1/+2
The HiHope RZ/G2N sub board sits below the HiHope RZ/G2N Rev.3.0/4.0 main board. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-11-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-26arm64: dts: renesas: Add HiHope RZ/G2N Rev.3.0/4.0 main board supportLad Prabhakar1-1/+2
Add support for HiHope RZ/G2N Rev.3.0/4.0 main board support based on r8a774b1 SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-10-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-26arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 board with idk-1110wr displayLad Prabhakar1-1/+2
Add support for idk-1110wr display as similarly done for Rev.2.0 Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-9-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-26arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 sub board supportLad Prabhakar1-1/+2
The HiHope RZ/G2M sub board sits below the HiHope RZ/G2M Rev.3.0/4.0 main board. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-7-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-26arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 main board supportLad Prabhakar1-1/+2
Add support for HiHope RZ/G2M Rev.3.0/4.0 main board support based on r8a774a1 SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-6-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-26arm64: dts: renesas: r8a774b1-hihope-rzg2n[-ex]: Rename HiHope RZ/G2N boardsLad Prabhakar1-2/+2
The existing DTS files for HiHope RZ/G2N boards are for Rev.2.0 version so reflect the same for the DTS file names so that the existing naming convention can be used for Rev.3.0/4.0 boards. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-26arm64: dts: renesas: r8a774a1-hihope-rzg2m[-ex/-ex-idk-1110wr]: Rename ↵Lad Prabhakar1-3/+3
HiHope RZ/G2M boards The existing DTS files for HiHope RZ/G2M boards are for Rev.2.0 version so reflect the same for the DTS file names so that the existing naming convention can be used for Rev.3.0/4.0 boards. While at it also added a comment about switch SW43 to be OFF for pciec1 to be activated. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-05-12arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION MIPI ↵Lad Prabhakar1-1/+2
Adapter V2.1 This patch adds support for AISTARVISION MIPI Adapter V2.1 board connected to G2E board. Common file aistarvision-mipi-adapter-2.1.dtsi is created which have the camera endpoint nodes for imx219 and ov5645 so that this can be re-used with other G2x platforms. r8a774c0-ek874-mipi-2.1.dts file enables the required VIN/CSI nodes and by default ties ov5645 camera endpoint to CSI2. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1587397794-11237-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-03-12arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr displayFabrizio Castro1-0/+1
The HiHope RZ/G2M is advertised as compatible with panel idk-1110wr from Advantech, however the panel isn't sold alongside the board. A new dts, adding everything that's required to get the panel to work with HiHope RZ/G2M, is the most convenient way to support the HiHope RZ/G2M when it's connected to the idk-1110wr. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1583957020-16359-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-03-12arm64: dts: renesas: Add support for M3ULCB with R-Car M3-W+Yuya Hamamachi1-0/+1
Add initial support for the Renesas M3ULCB board equipped with an R-Car M3-W+ SiP with 8 (2 x 4) GiB of RAM. To avoid build error on 'ulcb.dtsi', ssi2 is added into 'r8a77961.dtsi'. Based on commit 92980759c1699a3c ("arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+"). Signed-off-by: Yuya Hamamachi <yuya.hamamachi.sx@renesas.com> Link: https://lore.kernel.org/r/20200309064425.25437-3-yuya.hamamachi.sx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-02-21arm64: dts: renesas: Remove use of ARCH_R8A7795Geert Uytterhoeven1-4/+0
CONFIG_ARCH_R8A7795 was split in CONFIG_ARCH_R8A77950 and CONFIG_ARCH_R8A77951 in commit b925adfceb529389 ("soc: renesas: Add ARCH_R8A7795[01] for existing R-Car H3"), so its users can be removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200218112414.5591-1-geert+renesas@glider.be
2019-12-31arm64: dts: renesas: Prepare for split of ARCH_R8A7795 into ARCH_R8A7795[01]Geert Uytterhoeven1-0/+4
As R-Car H3 ES1.x (R8A77950) and R-Car H3 ES2.0+ (R8A77951) are really different SoCs, CONFIG_ARCH_R8A7795 will be split in CONFIG_ARCH_R8A77950 and CONFIG_ARCH_R8A77951. Relax dependencies by handling both the old and the new symbols. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191217183841.432-5-geert+renesas@glider.be
2019-12-31arm64: dts: renesas: Sort DTBs in MakefileGeert Uytterhoeven1-10/+7
Sort the entries for the various DTBs in the Makefile by SoC and board type. Keep Salvator-X(S) together, and do the same for ULCB with and without Kingfisher extension. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191217183841.432-4-geert+renesas@glider.be
2019-12-31arm64: dts: renesas: Drop redundant SoC prefixes from ULCB DTS file namesGeert Uytterhoeven1-8/+8
Unlike the V3MSK and V3HSK boards, the various "ULCB" boards are really the same boards, with different SiPs fitted, just like the Salvator-X(S) boards. Furthermore, the "H3", "M3", and "M3N" prefixes of the "ULCB" parts in the DTS file names are redundant, as they are implied by the SoC part numbers, which are also part of the file names. Hence drop the redundant prefixes, to make the DTS file names consistent with the file names for the various "Salvator-X(S)" boards. Suggested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191217183841.432-3-geert+renesas@glider.be
2019-12-31arm64: dts: renesas: Rename r8a7795{-es1,}* to r8a7795[01]*Geert Uytterhoeven1-5/+5
Despite using the same compatible values ("r8a7795"-based) because of historical reasons, R-Car H3 ES1.x (R8A77950) and R-Car H3 ES2.0+ (R8A77951) are really different SoCs, with different part numbers. Reflect this in the DTS files by changing their base names from "r8a7795-es1" and "r8a7795" to "r8a77950" resp. "r8a77951". Drop all "ES" references next to part numbers, as they are implied by the part numbers, and thus redundant. Note that DT binding headers, definitions, and compatible values are not renamed, to preserve backward compatibility. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191217183841.432-2-geert+renesas@glider.be
2019-12-20arm64: dts: renesas: Add EK874 board with idk-2121wr display supportFabrizio Castro1-1/+2
The EK874 is advertised as compatible with panel IDK-2121WR from Advantech, however the panel isn't sold alongside the board. A new dts, adding everything that's required to get the panel to to work with the EK874, is the most convenient way to support the EK874 when it's connected to the IDK-2121WR. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/1576590361-28244-7-git-send-email-fabrizio.castro@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-12-13arm64: dts: renesas: Rename r8a7796* to r8a77960*Geert Uytterhoeven1-3/+3
CONFIG_ARCH_R8A7796 was renamed to CONFIG_ARCH_R8A77960 in commit 39e57e14d7eaf818 ("soc: renesas: Add ARCH_R8A77960 for existing R-Car M3-W"), to avoid confusion between R-Car M3-W (R8A77960) and R-Car M3-W+ (R8A77961). Rename the DTS files as well, for consistency. Note that DT binding headers, definitions, and compatible values were not renamed, to preserve backward compatibility. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191211131311.23661-1-geert+renesas@glider.be Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-12-13arm64: dts: renesas: Remove use of ARCH_R8A7796Geert Uytterhoeven1-3/+0
CONFIG_ARCH_R8A7796 was renamed to CONFIG_ARCH_R8A77960 in commit 39e57e14d7eaf818 ("soc: renesas: Add ARCH_R8A77960 for existing R-Car M3-W"), so its users can be removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191211100438.7094-1-geert+renesas@glider.be
2019-11-01arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+Geert Uytterhoeven1-0/+1
Add initial support for the Renesas Salvator-X 2nd version development board equipped with an R-Car M3-W+ SiP with 8 (2 x 4) GiB of RAM. The memory map is as follows: - Bank0: 4GiB RAM : 0x000048000000 -> 0x000bfffffff 0x000480000000 -> 0x004ffffffff - Bank1: 4GiB RAM : 0x000600000000 -> 0x006ffffffff Based on a patch in the BSP by Takeshi Kihara <takeshi.kihara.df@renesas.com>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191023123342.13100-10-geert+renesas@glider.be
2019-11-01arm64: dts: renesas: Prepare for rename of ARCH_R8A7796 to ARCH_R8A77960Geert Uytterhoeven1-0/+3
CONFIG_ARCH_R8A7796 for R-Car M3-W (R8A77960) will be renamed to CONFIG_ARCH_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961), which will use CONFIG_ARCH_R8A77961. Relax dependencies by handling both symbols. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191023123342.13100-8-geert+renesas@glider.be
2019-10-10arm64: dts: renesas: Add HiHope RZ/G2N sub board supportBiju Das1-0/+1
The HiHope RZ/G2N sub board sits below the HiHope RZ/G2N main board. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Link: https://lore.kernel.org/r/1569831527-1250-6-git-send-email-biju.das@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-10-01arm64: dts: renesas: Add HiHope RZ/G2N main board supportBiju Das1-0/+1
Basic support for the HiHope RZ/G2N main board: - Memory, - Main crystal, - Serial console Signed-off-by: Biju Das <biju.das@bp.renesas.com> Link: https://lore.kernel.org/r/1568725530-55241-5-git-send-email-biju.das@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-06arm64: dts: renesas: Add HiHope RZ/G2M sub board supportBiju Das1-0/+1
The HiHope RZ/G2M sub board sits below the HiHope RZ/G2M main board. This patch also adds ethernet support along with a dtsi common to both HiHope RZ/G2M and RZ/G2N sub boards. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-06arm64: dts: renesas: Add HiHope RZ/G2M main board supportBiju Das1-0/+1
Basic support for the HiHope RZ/G2M main board: - Memory, - Main crystal, - Serial console This patch also includes a dtsi common to both HiHope RZ/G2M and RZ/G2N main boards. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: Add Si-Linux EK874 board supportBiju Das1-1/+1
The EK874 development kit from Silicon Linux is made of CAT874 (the main board) and CAT875 (the sub board that goes on top of CAT874). Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: Add Si-Linux CAT874 board supportBiju Das1-0/+1
Basic support for the Si-Linux board based on RZ/G2E: - Memory, - Main crystal, - Serial console Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-13arm64: dts: renesas: r8a77965: m3nulcb-kf: Initial device treeEugeniu Rosca1-0/+1
This is based on the existing KF device tree sources: $ ls -1 arch/arm64/boot/dts/renesas/*-kf.dts arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-13arm64: dts: renesas: r8a77965: m3nulcb: Initial device treeEugeniu Rosca1-0/+1
Allow the bare M3-N-based ULCB board to boot. Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: initial V3HSK board device treeSergei Shtylyov1-1/+1
Add the initial device tree for the V3H Starter Kit board. The board has 1 debug serial port (SCIF0); include support for it, so that the serial console can work. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: Add Renesas Ebisu board supportTakeshi Kihara1-0/+1
Basic support for the Renesas Ebisu board based on R-Car E3: - Memory, - Main crystal, - Serial console, Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [shimoda: rebase and add SPDX-License-Identifier] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-NTakeshi Kihara1-1/+1
Add initial support for the Renesas Salvator-XS (Salvator-X 2nd version) development board equipped with an R-Car M3-N SiP. Most features are enabled through the shared salvator-xs.dtsi board description. The memory configuration is specific to the M3-N SiP. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Switch to SPDX-License-Identifier, update patch description] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: Add R-Car Salvator-x M3-N supportJacopo Mondi1-0/+1
Add basic support for R-Car Salvator-X M3-N (R8A77965) board. Based on original work from: Takeshi Kihara <takeshi.kihara.df@renesas.com> Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-21arm64: dts: renesas: initial Condor board device treeSergei Shtylyov1-0/+1
Add the initial device tree for the R8A77980 SoC based Condor board. The board has 1 debug serial port (SCIF0); include support for it, so that the serial console can work. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> [simon: correct memory size to 0x78000000 (2GiB)] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-04arm64: dts: renesas: initial V3MSK board device treeSergei Shtylyov1-1/+1
Add the initial device tree for the V3M Starter Kit board. The board has 1 debug serial port (SCIF0); include support for it, so that the serial console can work. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-28arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-WGeert Uytterhoeven1-0/+1
Add initial support for the Renesas Salvator-XS (Salvator-X 2nd version) development board equipped with an R-Car M3-W SiP. Based on work for the Salvator-X and -XS boards with M3-W resp. H3 SiPs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-17Merge tag 'armsoc-dt' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM device-tree updates from Arnd Bergmann: "We add device tree files for a couple of additional SoCs in various areas: Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for networking, Amlogic A113D for audio, and Renesas R-Car V3M for automotive. As usual, lots of new boards get added based on those and other SoCs: - Actions S500 based CubieBoard6 single-board computer - Amlogic Meson-AXG A113D based development board - Amlogic S912 based Khadas VIM2 single-board computer - Amlogic S912 based Tronsmart Vega S96 set-top-box - Allwinner H5 based NanoPi NEO Plus2 single-board computer - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers - Allwinner A83T based TBS A711 Tablet - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8 - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500 wireless access points and routers - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board - NXP i.MX53 based GE Healthcare PPD biometric monitor - NXP i.MX6 based Pistachio single-board computer - NXP i.MX6 based Vining-2000 automotive diagnostic interface - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards - Renasas r8a7745 based iWave G22D-SODIMM SoM - Rockchip rk3288 based Amarula Vyasa single-board computer - Samsung Exynos5800 based Odroid HC1 single-board computer For existing SoC support, there was a lot of ongoing work, as usual most of that concentrated on the Renesas, Rockchip, OMAP, i.MX, Amlogic and Allwinner platforms, but others were also active. Rob Herring and many others worked on reducing the number of issues that the latest version of 'dtc' now warns about. Unfortunately there is still a lot left to do. A rework of the ARM foundation model introduced several new files for common variations of the model" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits) arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3 dt-bindings: bus: Add documentation for the Technologic Systems NBUS arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock ARM: dts: owl-s500: Add CubieBoard6 dt-bindings: arm: actions: Add CubieBoard6 ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock ARM: dts: owl-s500: Set power domains for CPU2 and CPU3 arm: dts: mt7623: remove unused compatible string for pio node arm: dts: mt7623: update usb related nodes arm: dts: mt7623: update crypto node ARM: dts: sun8i: a711: Enable USB OTG ARM: dts: sun8i: a711: Add regulator support ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1 ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1 ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes ARM: dts: sunxi: Add dtsi for AXP81x PMIC arm64: dts: allwinner: H5: Restore EMAC changes ...
2017-11-15Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-23 23:12:56 +0300