summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom
AgeCommit message (Collapse)AuthorFilesLines
2017-08-18arm64: dts: Add ipq8074 SoC and HK01 board supportVaradarajan Narayanan3-0/+247
Add initial device tree support for the Qualcomm IPQ8074 SoC and HK01 evaluation board. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-16arm64: dts: qcom: msm8916: Add IOMMU supportRob Clark1-0/+57
This patch adds the IOMMU node for the IOMMU that resides on the Qualcomm MSM8916 platforms. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-16arm64: dts: qcom: msm8916: Add Venus video codec supportStanimir Varbanov1-0/+26
This patch adds the Qualcomm Venus video codec node for the video codec hardware residing on MSM8916 platforms. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-15arm64: dts: qcom: msm8916: Add gpu supportRob Clark1-0/+35
This patch adds the Qualcomm Adreno GPU node that exists in the MSM8916. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-09arm64: dts: qcom: msm8996: Specify smd-edge for ADSPBjorn Andersson1-0/+9
Add the smd-edge node for the adsp, to allow SMD communication with the ADSP. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-09arm64: dts: msm8996: Add modem smp2p nodesBjorn Andersson1-0/+24
This patch adds the SMP2P nodes for the modem. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-09arm64: dts: qcom: db820c: Add pm8994 regulator nodeRajendra Nayak1-0/+148
Add PM8994 RPM regulators with their min/max voltages to DB820c. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-09arm64: dts: qcom: Add RPM glink nodes to msm8996Bjorn Andersson1-0/+78
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-09arm64: dts: msm8996: Add device node for qcom,dwc3Vivek Gautam3-0/+115
Adding required device node for couple of DWC3 controllers present on msm8996 chipset to enable High speed and Super speed USB support. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-09arm64: dts: msm8996: Add device node for qcom qmp-phy for pcieVivek Gautam2-0/+66
Add required device node for QMP phy based 3-lane PCIe phy present on msm8996 chipset to enable support for the same. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-09arm64: dts: msm8996: Add device node for qcom qmp-phy for usbVivek Gautam2-0/+37
Adding required device node for USB3 QMP phy present on msm8996 chipset to enable support for the same. This phy provides super speed usb functionality for dwc3 controller on msm8996. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-09arm64: dts: msm8996: Add device node for qcom qusb2 phyVivek Gautam2-0/+59
Adding device node for QUSB2 phy and the required infrastructure to enable support for the same. This phy is used by dwc3 controller present on msm8996. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-09arm64: dts: qcom: add cec clock for apq8016 boardHans Verkuil1-0/+2
The adv7533 on this board needs a cec clock. Hook it up in the dtsi to enable CEC for the HDMI transmitters. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-09arm64: dts: pmi8994: Add device node for pmi8994 gpiosVivek Gautam1-0/+17
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-09arm64: dts: qcom-msm8916: dts: Update coresight replicatorSuzuki K. Poulose1-1/+1
Replace the obsolete compatible string for Coresight programmable replicator with the new one. Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-09arm64: dts: qcom: Force host mode for USB on apq8016-sbcStephen Boyd2-10/+6
Commit ed75d6a96905 ("arm64: dts: qcom: Collapse usb support into one node") breaks host mode support on apq8016-sbc boards. This is because the mux driver (tc7usb40mu) hasn't been merged. Without that driver, we can't toggle the GPIO going to the mux to route out the D+/D- lines to the USB hub that's on the board. One solution would be to totally revert this change, but that opens us up to other problems when two USB drivers are operating the same hardware block at the same time. Let's modify the DT so that the USB controller is always in host mode and connected to the hub so that things like USB keyboards and mouses work. This is the mode that most people prefer anyway with these devices. We also delete the usb-switch node because the binding was never accepted upstream. In the future, we can add muxing support and then update the DT to support both modes at runtime. Patches to support this are already on the mailing list. Fixes: ed75d6a96905 ("arm64: dts: qcom: Collapse usb support into one node") Reported-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-07-05Merge tag 'armsoc-dt64' of ↵Linus Torvalds4-50/+107
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 64-bit DT updates from Arnd Bergmann: "Device-tree updates for arm64 platforms. For the first time I can remember, this is actually larger than the corresponding branch for 32-bit platforms overall, though that has more individual changes. A significant portion this time is due to added machine support: - Initial support for the Realtek RTD1295 SoC, along with the Zidoo X9S set-top-box - Initial support for Actions Semi S900 and the Bubblegum-96 single-board-cёmputer. - Rockchips support for the rk3399-Firefly single-board-computer gets added, this one stands out for being relatively fast, affordable and well₋supported, compared to many boards that only fall into one or two of the above categories. - Mediatek gains support for the mt6797 mobile-phone SoC platform and corresponding evaluation board. - Amlogic board support gets added for the NanoPi K2 and S905x LibreTech CC single-board computers and the R-Box Pro set-top-box - Allwinner board support gets added for the OrangePi Win, Orangepi Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers and the SoPine system-on-module. - Renesas board support for Salvator-XS and H3ULCB automotive development systems. - Socionext Uniphier board support for LD11-global and LD20-global, whatever those may be. - Broadcom adds support for the new Stingray communication processor in its iProc family, along with two reference boards. Other updates include: - For the hisicon platform, support for Hi3660-Hikey960 gets extended significantly. - Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier, Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits) ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k" arm64: dts: mediatek: don't include missing file ARM64: dts: meson-gxl: Add Libre Technology CC support dt-bindings: arm: amlogic: Add Libre Technology CC board dt-bindings: add Libre Technology vendor prefix arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K arm64: dts: zte: Use - instead of @ for DT OPP entries arm64: dts: marvell: add gpio support for Armada 7K/8K arm64: dts: marvell: add pinctrl support for Armada 7K/8K arm64: dts: marvell: use new binding for the system controller on cp110 arm64: dts: marvell: remove *-clock-output-names on cp110 arm64: dts: marvell: use new bindings for xor clocks on ap806 arm64: dts: marvell: mcbin: enable the mdio node arm64: dts: Add Actions Semi S900 and Bubblegum-96 dt-bindings: Add vendor prefix for uCRobotics arm64: dts: marvell: add xmdio nodes for 7k/8k arm64: dts: marvell: add a comment on the cp110 slave node status arm64: dts: marvell: remove cpm crypto nodes from dts files arm64: dts: marvell: cp110: enable the crypto engine at the SoC level ...
2017-06-09arm64: dts: qcom: msm8916: Add debug unitLeo Yan1-0/+32
Add debug unit on Qualcomm msm8916 based platforms, including the DragonBoard 410c board. Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-06arm64: dts: apq8016-sbc: Correct WLAN LED default-triggerBjorn Andersson1-1/+1
The TX status trigger of the wlan interface is named phy0tx, so this updates the default-trigger for the WLAN LED to use that instead. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-06-06arm64: dts: msm8996: Add CPU clock controller nodeRajendra Nayak1-0/+6
Add the DT node for Kryo CPU clock controller on msm8996 devices. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-06-06arm64: dts: smem enablement for msm8992Jeremy McNicoll1-0/+42
SMEM allows various subsystems/processors to share memory/data (heap format) in order to enable various peripherals. Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-06-06arm64: dts: msm8992 add fixed regulatorJeremy McNicoll1-0/+11
This regulator is not moving anywhere. Sit, stay... Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-05-26arm64: dts: qcom: Collapse usb support into one nodeStephen Boyd2-49/+47
We currently have three device nodes for the same USB hardware block, as evident by the reuse of the same reg address multiple times. Now that the chipidea driver fully supports OTG with the MSM wrapper we can collapse all these nodes into one USB device node, reflecting the true nature of the hardware. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-03-29arm64: dts: msm8996: Add ADSP PIL nodespjoshi@codeaurora.org1-0/+20
Add ADSP node required for Qualcomm ADSP Peripheral Image Loader. Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-03-29arm64: dts: qcom: pm8994: Add rtc nodeBjorn Andersson1-0/+7
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-03-29arm64: dts: apq8016-sbc: Add ramoopsBjorn Andersson1-0/+11
Declare a ramoops memory segment to aid debugging for those without UART access. Verified to carry console log when holding volume down for 15 seconds. No memory region for ramoops-like support was found downstream, so the arbitrarily picked region is the last MB of System RAM. Cc: John Stultz <john.stultz@linaro.org> Cc: Mart Raudsepp <leio@gentoo.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-03-28arm64: dts: qcom: msm8916: Update hexagon nodeBjorn Andersson1-10/+14
It's necessary to reference the xo clock and cx supply, so specify these in the node. Also move the Hexagon smd-edge into the hexagon node, to enable SSR. As cxo is not yet available we reference the fixed version of cxo for now, which will work until proper power management is implemented. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-03-28arm64: dts: msm8996: Add SLPI SMP2P dt node.avaneesh dwivedi1-0/+24
Add smp2p support to communicate with slpi processor. Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-03-28arm64: dts: qcom: Replace PMU compatible with a53 specific oneStephen Boyd1-1/+1
The PMU on msm8916 is for the cortex-a53 type CPU. Update the compatible to the more specific one so we can get the a53 specific events out of the PMU. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-03-28arm64: dts: qcom: msm8996: Fixup smp2p nodeBjorn Andersson1-1/+1
The SMEM state property name changes between the integration branch and mainline, update to use the correct one. Fixes: 2f45d9fcd531 ("arm64: dts: msm8996: Add SMP2P and APCS nodes") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Sarangdhar Joshi <spjoshi@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-02-09Merge tag 'qcom-arm64-for-4.11-2' of ↵Arnd Bergmann1-0/+240
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64 Pull "Qualcomm ARM64 Updates for v4.11 Part 2" from Andy Gross: * Add CoreSight nodes for MSM8916 * tag 'qcom-arm64-for-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: qcom: Add msm8916 CoreSight components
2017-02-01arm64: dts: qcom: Add msm8916 CoreSight componentsIvan T. Ivanov1-0/+240
Add initial set of CoreSight components found on Qualcomm msm8916 and apq8016 based platforms, including the DragonBoard 410c board. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-30Merge tag 'qcom-arm64-for-4.11' of ↵Olof Johansson8-3/+182
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64 Qualcomm ARM64 Updates for v4.11 * Add Vol+ support for DB820C and APQ8016 * Add HDMI audio support for APQ8016 * Fix DB820C GPIO pinctrl name * Enable WCNSS on MSM8916 * Add SCM node for MSM8996 * Use fixed XO clock on MSM8916 * tag 'qcom-arm64-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: db820c: add support to volume up key arm64: dts: apq8016-sbc: Limit MPP4 high state to 1.8V arm64: dts: apq8016-sbc: Add Volume Up key device node arm64: dts: apq8016-sbc: add support to hdmi audio via adv7533 arm64: dts: db820c: fix gpio pinctrl name correctly ARM: dts: msm8916: Add and enable wcnss node arm64: dts: msm8996: Add SCM DT node arm64: dts: qcom: msm8916: Use fixed factor xo clock Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-13arm64: dts: db820c: add support to volume up keySrinivas Kandagatla2-0/+31
This patch adds support to volume-up key found on the board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13arm64: dts: apq8016-sbc: Limit MPP4 high state to 1.8VIvan T. Ivanov1-0/+13
96Boards specs require all GPIO signals to be at 1.8V. Limit MPP4, which is PIN28 on J8, to 1.8V(L5). Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13arm64: dts: apq8016-sbc: Add Volume Up key device nodeIvan T. Ivanov2-0/+31
VOL/ZOOM+ button on DB410c is connected to SoC GPIO 104. Add support for it. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13arm64: dts: apq8016-sbc: add support to hdmi audio via adv7533Srinivas Kandagatla1-0/+10
This patch adds support to hdmi audio via adv7533. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13arm64: dts: db820c: fix gpio pinctrl name correctlySrinivas Kandagatla1-1/+1
Fix typo in node name to reflect the correct pin name. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: msm8916: Add and enable wcnss nodeBjorn Andersson3-1/+89
Add the wcnss remoteproc node the SMD edge and the wcnss ctrl, bluetooth and wifi nodes specified and enable this on db410c. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13arm64: dts: msm8996: Add SCM DT nodespjoshi@codeaurora.org1-0/+6
Add SCM DT node to enable SCM functionality on MSM8996. Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13arm64: dts: qcom: msm8916: Use fixed factor xo clockGeorgi Djakov1-1/+1
The rpmcc driver is providing the XO clock, which is the parent of almost all clocks. But during boot, this driver may probe later and leave most of the clocks without parent. The common clock framework currently reports invalid rate for orphan clocks and this may confuse drivers. To resolve this, use fixed clocks registration until we have some support to deal with the this issue. Removing the generic rpmcc compatible is enough to switch back to fixed factor XO clock. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-12-28arm64: dts: msm8996: Add required memory carveoutsStephen Boyd1-0/+10
This patch adds required memory carveouts so that the kernel does not access memory that is in use or has been reserved for use by other remote processors. Signed-off-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-01Merge tag 'qcom-arm64-for-4.10-2' of ↵Arnd Bergmann2-8/+12
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64 Pull "Qualcomm ARM64 Updates for v4.10 - Part 2" from Andy Gross: * Add SDHC xo clk and 1.8V DDR support * tag 'qcom-arm64-for-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: qcom: msm8916: Add ddr support to sdhc1 ARM: dts: Add xo to sdhc clock node on qcom platforms
2016-11-30arm64: dts: fix build errors from missing dependenciesArnd Bergmann1-1/+1
Two branches were incorrectly sent without having the necessary header file changes. Rather than back those out now, I'm replacing the symbolic names for the clks and resets with the numeric values to get 'make allmodconfig dtbs' back to work. After the header file changes are merged, we can revert this patch. Fixes: 6bc37fa ("arm64: dts: add Allwinner A64 SoC .dtsi") Fixes: 50784e6 ("dts: arm64: db820c: add pmic pins specific dts file") Acked-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-11-24arm64: dts: qcom: msm8916: Add ddr support to sdhc1Ritesh Harjani1-0/+1
This adds mmc-ddr-1_8v support to DT for sdhc1 of msm8916. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-11-23ARM: dts: Add xo to sdhc clock node on qcom platformsRitesh Harjani2-8/+11
Add xo entry to sdhc clock node on all qcom platforms. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-11-13arm64: dts: msm8994 SoC and Huawei Angler (Nexus 6P) supportBastian Köcher4-0/+295
Initial device tree support for Qualcomm MSM8994 SoC and Huawei Angler / Google Nexus 6P support. The device tree is based on the Google 3.10 kernel tree. The device can be booted into the initrd with only one CPU running. Signed-off-by: Bastian Köcher <mail@kchr.de> [jeremymc@redhat.com: removed Kconfig, defconfig, move from Huawei to qcom dir] Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com> Tested-by: Michael Scott <michael.scott@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-11-13arm64: dts: msm8992 SoC and LG Bullhead (Nexus 5X) supportJeremy McNicoll4-2/+267
Initial device tree support for Qualcomm MSM8992 SoC and LG Bullhead / Google Nexus 5X support. Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-11-13arm64: dts: msm8996: Add SMP2P and APCS nodesspjoshi@codeaurora.org1-0/+29
Add SMP2P and APCS DT nodes required for Qualcomm ADSP Peripheral Image Loader. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-11-13arm64: dts: msm8996: Add SMEM DT nodesBjorn Andersson1-0/+17
Add SMEM and TCSR DT nodes on MSM8996. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-13 23:53:32 +0300