| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add a node for the smb2 charger hardware found on the pmi8998 pmic
following the DT bindings.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524-pmi8998-charger-dts-v2-2-2a5c77d2ff0c@linaro.org
|
|
There is no need for the RRADC to be disabled by default,
lets just enable it by default and not clutter up DT.
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524-pmi8998-charger-dts-v2-1-2a5c77d2ff0c@linaro.org
|
|
Qualcomm PMIC PMI8998 has a 3 channel flash LED driver which is used
by many phones for 1 or 2 flash LEDs. Each LED can be used in flash mode
or torch mode. Add the flash LED controller node to PMI8998 DTS.
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230518133113.273880-3-me@dylanvanassche.be
|
|
The gpio node in PMIC dts'es define access to multiple GPIOs. Most Qcom
PMICs were already using the plural _gpios label to point to this node,
but a few PMICs were left behind including the recently-pulled
pm(i)8950.
Rename it from *_gpio to *_gpios for pm6125, pm6150(l), pm8005,
pm(i)8950, and pm(i)8998.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209220450.1793421-1-marijn.suijten@somainline.org
|
|
Add a DT node for the Round Robin ADC found in the PMI8998 PMIC.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016180330.1912214-2-caleb.connolly@linaro.org
|
|
GPIO controller nodes are named by convention just "gpio", not "gpios".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220908080938.29199-2-krzysztof.kozlowski@linaro.org
|
|
Bindings expect LPG/PWM node name to be "pwm":
pmic@5: 'lpg' does not match any of the regexes
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220828084341.112146-9-krzysztof.kozlowski@linaro.org
|
|
Add PWM/LPG nodes to the PMICs currently supported by the binding.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Dylan Van Assche <me@dylanvanassche.be>
Link: https://lore.kernel.org/r/20220505022706.1692554-2-bjorn.andersson@linaro.org
|
|
On PM660L, PMI8994 and PMI8998, the WLED has two address spaces and with
size-cells=0, they should be encoded as two separate items.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220505154702.422108-2-krzysztof.kozlowski@linaro.org
|
|
The PMI8998 PMIC has a WLED backlight controller, which is used on
most MSM8998 and SDM845 based devices: add a base configuration for
it and keep it disabled.
This contains only the PMIC specific configuration that does not
change across boards; parameters like number of strings, OVP and
current limits are product specific and shall be specified in the
product DT in order to achieve functionality.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210909123628.365968-1-angelogioacchino.delregno@somainline.org
|
|
In commit 208921bae696 ("arm64: dts: qcom: pmi8998: Add nodes for
LAB and IBB regulators") bindings for the lab/ibb regulators were
added to the pmi8998 dt, but the original committer has never
specified what the interrupts were for.
LAB and IBB regulators provide two interrupts, SC-ERR (short
circuit error) and VREG-OK but, in that commit, the regulators
were provided with two different types of interrupts;
specifically, IBB had the SC-ERR interrupt, while LAB had the
VREG-OK one, none of which were (luckily) used, since the driver
didn't actually use these at all.
Assuming that the original intention was to have the SC IRQ in
both LAB and IBB, as per the names appearing in documentation,
fix the SCP interrupt.
While at it, also add the OCP interrupt in order to be able to
enable the Over-Current Protection feature, if requested.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210119174421.226541-8-angelogioacchino.delregno@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This patch adds devicetree nodes for LAB and IBB regulators.
Signed-off-by: Nisha Kumari <nishakumari@codeaurora.org>
[sumits: Updated for better compatible strings and names]
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://lore.kernel.org/r/20200622124110.20971-4-sumit.semwal@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This adds the gpio-ranges property so that the GPIO pins are initialized
by the GPIO framework and not pinctrl. This fixes a circular dependency
between these two frameworks so GPIO hogging can be used on this board.
This was not tested on this particular hardware, however this same
change was tested on qcom-pm8941 using a LG Nexus 5 (hammerhead) phone.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Andy Gross <agross@kernel.org>
|
|
Add interrupt controller properties now that spmi-gpio is a proper
hierarchical IRQ chip. The interrupts property is no longer needed so
remove it.
This change was not tested on any hardware but the same change was
tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with
no issues.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add new dtsi file for the PMI8998, with its gpios and include all three
PMICs in the MSM8998 MTP dts.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
