summaryrefslogtreecommitdiff
path: root/arch/arm/plat-mxc/include/mach
AgeCommit message (Collapse)AuthorFilesLines
2011-03-19Merge branch 'for-linus' of ↵Linus Torvalds1-1/+11
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits) mmc: dw_mmc: support mmc power control with regulator mmc: dw_mmc: fix suspend/resume operation mmc: dw_mmc: add quirks for unreliable card detect, and capabilities mmc: tmio: fix address in kunmap_atomic() calls mmc: core: reset card voltage after power off mmc: core: export function mmc_do_release_host() mmc: sdio: remember new card RCA when redetecting card mmc: dw_mmc: Remove set-but-unused variable. mmc: sdhci-esdhc-imx: add card detect on custom GPIO for mx25/35 mmc: sdhci-esdhc: broken card detection is not a default quirk mmc: sdhci-esdhc-imx: add write protect on custom GPIO on mx25/35 mmc: msm_sdcc: remove needless cache flush after dma_unmap_sg() mmc: sh_mmcif: support aggressive clock gating mmc: check if mmc cards < 2GB do sector addressing mmc: core: comment on why sdio_reset is done at init time mmc: dw_mmc: support DDR mode mmc: via-sdmmc: Remove set-but-unused variable. mmc: cb710: Return err value in cb710_wait_while_busy() mmc: sdhci-pci: Remove set-but-unused variable. mmc: mxs-mmc: add mmc host driver for i.MX23/28 ...
2011-03-18Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds16-367/+2467
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits) davinci: DM644x EVM: register MUSB device earlier davinci: add spi devices on tnetv107x evm davinci: add ssp config for tnetv107x evm board davinci: add tnetv107x ssp platform device spi: add ti-ssp spi master driver mfd: add driver for sequencer serial port ARM: EXYNOS4: Implement Clock gating for System MMU ARM: EXYNOS4: Enhancement of System MMU driver ARM: EXYNOS4: Add support for gpio interrupts ARM: S5P: Add function to register gpio interrupt bank data ARM: S5P: Cleanup S5P gpio interrupt code ARM: EXYNOS4: Add missing GPYx banks ARM: S3C64XX: Fix section mismatch from cpufreq init ARM: EXYNOS4: Add keypad device to the SMDKV310 ARM: EXYNOS4: Update clocks for keypad ARM: EXYNOS4: Update keypad base address ARM: EXYNOS4: Add keypad device helpers ARM: EXYNOS4: Add support for SATA on ARMLEX4210 plat-nomadik: make GPIO interrupts work with cpuidle ApSleep mach-u300: define a dummy filter function for coh901318 ... Fix up various conflicts in - arch/arm/mach-exynos4/cpufreq.c - arch/arm/mach-mxs/gpio.c - drivers/net/Kconfig - drivers/tty/serial/Kconfig - drivers/tty/serial/Makefile - drivers/usb/gadget/fsl_mxc_udc.c - drivers/video/Kconfig
2011-03-17mmc: sdhci-esdhc-imx: add card detect on custom GPIO for mx25/35Wolfram Sang1-0/+2
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Marc Reilly <marc@cpdesign.com.au> Tested-by: Eric Benard <eric@eukrea.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: sdhci-esdhc-imx: add write protect on custom GPIO on mx25/35Wolfram Sang1-1/+9
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Marc Reilly <marc@cpdesign.com.au> Tested-by: Eric Benard <eric@eukrea.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17Merge branch 'p2v' into develRussell King1-9/+9
Conflicts: arch/arm/kernel/module.c arch/arm/mach-s5pv210/sleep.S
2011-03-10mx51 enchance the sd/mmc HW timing compatibility on mx51 boards.Richard Zhu1-20/+20
Some cards have the CRC errors in read on mx51 BBG board. Configure the eSDHC pad configurations to level up the compatibility to fix this issue. Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com> Tested-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx3x: clean up ARCH_MX3XRichard Zhao1-2/+2
Move to SOC_SOC_IMX3X. Leave ARCH_MX31/35 definitions there, in case some place prevent multi-soc single image. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx5x: clean up ARCH_MX5XRichard Zhao2-6/+6
Move to SOC_SOC_IMX5X. Leave only places which prevent multi-soc using ARCH_MX5X. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM i.MX: introduce imx_otg_ulpi_create to create ULPI transceiversSascha Hauer1-0/+9
The boards are currently using otg_ulpi_create and mxc_ulpi_access_ops, both are only present if CONFIG_USB_ULPI is set. To remove the need of ifdefs in the board code introduce a imx_otg_ulpi_create functions which expands to a static inline function if compiled without ulpi. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM i.MX: iomux v1 initialization away from initcallSascha Hauer1-0/+2
This saves us from soc level dispatching in generic files Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM i.MX: Move gpio initialization to SoC specific filesSascha Hauer1-0/+15
This saves us from soc level dispatching in generic files Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07MX1: Add structure, registration functions for framebuffer and rename LCDC INTGwenhael Goavec-Merou1-1/+1
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mxc91231/iomux: allow pin_list to be constUwe Kleine-König1-4/+4
While at it remove some useless consts from unsigned int arguments. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: iomux-imx31: allow pin_list to be constUwe Kleine-König1-4/+4
This fixes the following warning in a mx3_defconfig build: arch/arm/mach-mx3/mach-bug.c: In function 'bug_board_init': arch/arm/mach-mx3/mach-bug.c:47: warning: passing argument 1 of 'mxc_iomux_setup_multiple_pins' discards qualifiers from pointer target type While at it remove some useless consts from unsigned int arguments. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07MX1: Rename SPI interrupt name and base address.Gwenhael Goavec-Merou1-3/+4
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx35: fix ATA_DATA3 pad control addressRyan Lortie1-7/+7
According to the "i.MX35 (MCIMX35) Multimedia Applications Processor Reference Manual" the correct address for the pad control register IOMUXC_SW_PAD_CTL_PAD_ATA_DATA3 is 0x06ec, not 0x6e8. Signed-off-by: Ryan Lortie <desrt@desrt.ca> Acked-by: Marc Reilly <marc@cpdesign.com.au> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-28mx31: add support for the bugbase 1.3 from buglabsDenis 'GNUtoo' Carikli1-0/+4
Note that the hardware schematics and documentations can be obtained here: http://www.bugcommunity.com/wiki/index.php/BUGbase Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-28ARM: imx53: add sdhc pad settingsRichard Zhu1-40/+43
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-21ARM: imx53_smd add uncompress printFrank Li1-0/+1
Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18ARM: imx50: correct iomux-mx50.h wrong daisy chain settingsRichard Zhao1-22/+22
Most fix is for uart txd/cts. They don't need to select input. And fix some other pads with wrong select input. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18ARM: imx53_loco add uncompress printRichard Zhao1-0/+1
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18ARM: mx5: Add watchdog support for MX53Fabio Estevam1-1/+1
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18ARM: P2V: separate PHYS_OFFSET from platform definitionsRussell King1-9/+9
This uncouple PHYS_OFFSET from the platform definitions, thereby facilitating run-time computation of the physical memory offset. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD & ↵Julien Boibessot1-2/+2
MX51_PAD_USBH1_DATA2__UART2_TXD declarations Fixes 2 small regressions of recent iomux changes: - current MX51_PAD_UART2_TXD__UART2_TXD declaration overwrites IOMUXC_UART2_IPP_UART_RXD_MUX_SELECT_INPUT register (0x09ec) and prevent UART2 Rx from working properly. (Tested on my custom i.MX51 board where UART2 is used as console) - current MX51_PAD_USBH1_DATA2__UART2_TXD declaration also has the same problem. (Not tested) Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-11ARM i.MX ehci: do ehci init in board specific functionsSascha Hauer1-3/+0
The mxc-ehci driver calls SoC specific phy initialization right after calling board specific initialization. To offer greater flexibility for boards to setup the phy and to get rid of some unnecessary flags in platform data this patch lets the boards call the SoC specific phy initialization and remove it from the driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-11ARM i.MX ehci: factor out soc specific functionsSascha Hauer1-0/+6
Currently we have a mxc_initialize_usb_hw which is called on every i.MX SoC. This function dispatches the different SoC types, which is quite ugly. This patch moves the SoC specific USB initialization to their correspondive mach directories. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-11Merge commit 'v2.6.38-rc4' into imx-for-2.6.39Sascha Hauer1-0/+2
Conflicts: arch/arm/mach-mxs/clock-mx28.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10ARM: mxc91231: use .init_early to initialize cpu typeUwe Kleine-König1-0/+1
This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10ARM: mx5: use .init_early to initialize cpu type, reset address and iomuxerUwe Kleine-König1-0/+2
This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10ARM: mx3: use .init_early to initialize cpu type, reset address and iomuxerUwe Kleine-König1-0/+3
This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10ARM: imx: use .init_early to initialize cpu type and reset addressUwe Kleine-König1-0/+4
This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-25ARM: imx: Add initial support for IMX27IPCAM boardFabio Estevam1-0/+1
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-24ARM: imx: Add VPR200 and MX51_3DS entries to uncompress.hFabio Estevam1-0/+2
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Marc Reilly <marc@cpdesign.com.au> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-21ARM: i.MX53: Add full iomux support for mx53Dinh Nguyen1-293/+2343
This iomux file contains all the available pins that are iomux capable. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-15Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds4-18/+21
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (161 commits) ARM: pxa: fix building issue of missing physmap.h ARM: mmp: PXA910 drive strength FAST using wrong value ARM: mmp: MMP2 drive strength FAST using wrong value ARM: pxa: fix recursive calls in pxa_low_gpio_chip AT91: Support for gsia18s board AT91: Acme Systems FOX Board G20 board files AT91: board-sam9m10g45ek.c: Remove duplicate inclusion of mach/hardware.h ARM: pxa: fix suspend/resume array index miscalculation ARM: pxa: use cpu_has_ipr() consistently in irq.c ARM: pxa: remove unused variable in clock-pxa3xx.c ARM: pxa: fix warning in zeus.c ARM: sa1111: fix typo in sa1111_retrigger_lowirq() ARM mxs: clkdev related compile fixes ARM i.MX mx31_3ds: Fix MC13783 regulator names ARM: plat-stmp3xxx: irq_data conversion. ARM: plat-spear: irq_data conversion. ARM: plat-orion: irq_data conversion. ARM: plat-omap: irq_data conversion. ARM: plat-nomadik: irq_data conversion. ARM: plat-mxc: irq_data conversion. ... Fix up trivial conflict in arch/arm/plat-omap/gpio.c (Lennert Buytenhek's irq_data conversion clashing with some omap irq updates)
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13ARM: i.MX53: add IOMUX pad for ecspiYong Shen1-0/+3
Add IOMUX pad entry for ecspi Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-12ARM: mx5: dynamically allocate imx-keypad devicesFabio Estevam1-1/+1
Add support for dynamical allocation of imx-keypad on mx5 platform. After moving to dynamically registration of the keypad, the keypad clock name needs to change accordingly. The reason is that the original mx5 keypad platform_device id was 0, now we use id=-1 as per arch/arm/plat-mxc/devices/platform-imx-keypad.c. Tested keypad successfully on a MX51_3DS board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-12ARM: mx5: dynamically allocate pwm devicesFabio Estevam1-2/+2
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-11ARM i.MX53 enable spi on EVK boardYong Shen1-5/+5
1. some macro definitions fix 2. add platform data for spi device 3. register spi clocks Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-07ARM i.MX53 enable sdhc support on EVK boardYong Shen1-8/+8
1. changes some register address to fit macro definition 2. add platform data and clock for sdhc Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-07ARM i.MX53: enable fec driver on EVK boardYong Shen1-1/+1
1. Adjust FEC base address name to fit macro definition 2. Add platform data and reset function for FEC Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-07arm: mxc: move IOMUX_CONFIG_SION definition to iomux-v3.hRichard Zhao2-1/+1
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-04ARM i.MX53: Make MX53 EVK bootableYong Shen3-1/+27
1. Add entries to Kconfig 2. Add machine definition 3. Add Uart platform data, pad setting and base address 4. Adjust GPIO irq number Signed-off-by: Yong Shen <yong.shen@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03ARM i.MX51: rename IPU irqsSascha Hauer1-2/+2
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03MX51: Add support for usb host 2Arnaud Patard (Rtp)1-0/+1
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03arm: mx50: add mx50 reference design board supportRichard Zhao1-0/+4
Add basic function and uart device support. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03arm: mx50: add core functions support except clockRichard Zhao7-0/+1288
Add core definitions and memory map, gpio, irq, iomux, uart device support. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03arm: mx5: mx51/53 have different mxc_cpu_type definitionRichard Zhao1-2/+13
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03arm: mx51: define mx51's own MXC_GPIO_IRQSRichard Zhao1-1/+1
mx5 SoCs have different GPIO port count. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-23 20:01:50 +0300