summaryrefslogtreecommitdiff
path: root/arch/arm/mach-versatile
AgeCommit message (Collapse)AuthorFilesLines
2011-05-23Merge branches 'consolidate-clksrc', 'consolidate-flash', ↵Russell King1-27/+4
'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidate
2011-05-23clockevents: ARM sp804: allow clockevent name to be specifiedRussell King1-1/+1
This allows platforms to specify the clcokevent name upon registration. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clocksource: ARM sp804: obtain sp804 timer rate via clksRussell King1-1/+8
This allows platforms to specify the rate of the SP804 clocksource via the clk subsystem. While ARM boards clock these at 1MHz, BCMRing also has SP804 timers but are clocked at different rates. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clocksource: ARM sp804: allow clocksource name to be specifiedRussell King1-1/+1
This allows platforms to specify the clocksource name upon registration, which is necessary should they wish to register more than one sp804 clocksource. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6910/1: MTD: physmap: let set_vpp() pass a platform_device instead of a ↵Marc Zyngier1-1/+1
map_info The set_vpp() method provided by physmap passes a map_info back to the platform code, which has little relevance as far as the platform is concerned (this parameter is completely unused). Instead, pass the platform_device, which can be used in the pismo driver to retrieve some important information in a nicer way, instead of the hack that was in place. The empty set_vpp function in board-at572d940hf_ek.c is left untouched, as the board/SoC is scheduled for removal. Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6907/1: Versatile: Use physmap driver instead of integrator-flashMarc Zyngier1-27/+4
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-30arm: versatile : Fix typo introduced in irq namespace cleanupGrant Likely1-1/+1
Commit 6845664(arm: Cleanup the irq namespace) introduces a typo causing a build failure for the versatile platform. [ tglx: Sorry, my bad. Have no idea how I fatfingered that ] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org LKML-Reference: <20110330060229.27397.7628.stgit@ponder> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29arm: Cleanup the irq namespaceThomas Gleixner1-1/+1
Convert to the new function names. Automated with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-20Merge branches 'fixes', 'pgt-next' and 'versatile' into develRussell King5-238/+68
2011-02-19ARM: integrator/versatile: consolidate FPGA IRQ handling codeRussell King2-52/+7
Consolidate the FPGA IRQ handling code. Integrator/AP and Versatile have one FPGA-based IRQ handler each. Integrator/CP has three. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: versatile: remove old AMBA device DMA definitionsRussell King3-24/+0
The AMBA DMA macro definitions are not used, and the AMBA Primecell DMA support makes no use of them either, so they can be removed. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: versatile: use new init_early for clock tree and sched_clock initRussell King4-12/+14
Initialize the clock tree and our sched_clock() early. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: versatile: switch Versatile to use consolidated CLCDRussell King1-151/+35
This switches Versatile platforms to use the consolidated CLCD panel support, including the display capabilities. Versatile can support RGB5551, BGR5551, RGB565 and BGR565 modes. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: versatile: support CLCD RGB565 layout with blue LSBRussell King1-3/+16
RGB565 with blue in the LSB wasn't supported. Add support for this layout. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-18ARM: P2V: separate PHYS_OFFSET from platform definitionsRussell King1-1/+1
This uncouple PHYS_OFFSET from the platform definitions, thereby facilitating run-time computation of the physical memory offset. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-25ARM: versatile: name configuration options after actual board namesRussell King1-4/+6
Update the option text to those which appear on the front of the appropriate board user guides. This gives consistent board naming, and makes it obvious which option is for which platform. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-13ARM: versatile: irq_data conversion.Lennert Buytenhek1-8/+10
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-07Merge branch 'misc' into develRussell King2-2/+2
Conflicts: arch/arm/Kconfig arch/arm/common/Makefile arch/arm/kernel/Makefile arch/arm/kernel/smp.c
2011-01-07Merge branch 'smp' into miscRussell King1-1/+1
Conflicts: arch/arm/kernel/entry-armv.S arch/arm/mm/ioremap.c
2011-01-05Merge branch 'clksrc' into develRussell King1-0/+10
Conflicts: arch/arm/mach-vexpress/v2m.c arch/arm/plat-omap/counter_32k.c arch/arm/plat-versatile/Makefile
2011-01-05Merge branches 'ftrace', 'gic', 'io', 'kexec', 'mod', 'sa11x0', 'sh' and ↵Russell King1-1/+1
'versatile' into devel
2010-12-23ARM: versatile: convert sched_clock() to use new infrastructureRussell King1-0/+10
Convert versatile platforms to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-05ARM: 6520/1: Kconfig: add new symbol MIGHT_HAVE_PCIHans Ulli Kroll1-0/+1
Today more boards with arm cpu have selectable pci bus. This patch makes this more scalable and remove line continuations in Kconfig Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-26ARM: 6483/1: arm & sh: factorised duplicated clkdev.cJean-Christop PLAGNIOL-VILLARD1-2/+1
factorise some generic infrastructure to assist looking up struct clks for the ARM & SH architecture. as the code is identical at 99% put the arch specific code for allocation as example in asm/clkdev.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-22ARM: 6484/1: fix compile warning in mm/init.cAnand Gadiyar1-1/+1
Commit 7c63984b86 (ARM: do not define VMALLOC_END relative to PAGE_OFFSET) changed VMALLOC_END to be an explicit value. Before this, it was relative to PAGE_OFFSET and therefore converted to unsigned long as PAGE_OFFSET is an unsigned long. This introduced the following build warning. Fix this by changing the explicit defines of VMALLOC_END to be unsigned long. CC arch/arm/mm/init.o arch/arm/mm/init.c: In function 'mem_init': arch/arm/mm/init.c:606: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Uwe Kleine-K <u.kleine-koenig@pengutronix.dee> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-04ARM: 6432/1: move timer-sp.c from versatile to commonRob Herring1-1/+1
From: Rob Herring <rob.herring@smooth-stone.com> The timer-sp h/w used on versatile platforms can also be used for other platforms, so move it to a common location. Signed-off-by: Rob Herring <rob.herring@smooth-stone.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-20arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre2-4/+0
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-20arm: return both physical and virtual addresses from addruartJeremy Kerr1-7/+5
Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-10-02ARM: do not define VMALLOC_END relative to PAGE_OFFSETNicolas Pitre1-1/+1
VMALLOC_END is supposed to be an absolute value, while PAGE_OFFSET may vary depending on the selected user:kernel memory split mode through CONFIG_VMSPLIT_*. In fact, the goal of moving PAGE_OFFSET down is to accommodate more directly addressed RAM by the kernel below the vmalloc area, and having VMALLOC_END move along PAGE_OFFSET is rather against the very reason why PAGE_OFFSET can be moved in the first place. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2010-08-05ARM: 6282/1: Remove useless definitions from versatile hardware.heric miao1-9/+0
Signed-off-by: Eric Miao <eric.miao@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-31Merge branches 'at91', 'ep93xx', 'kexec', 'iop', 'lmb', 'nomadik', 'nuc', ↵Russell King2-3/+34
'pl', 'spear' and 'versatile' into devel
2010-07-27ARM: Versatile: fix section mismatchRussell King1-1/+1
WARNING: vmlinux.o(.text+0xbf38): Section mismatch in reference from the function pci_versatile_scan_bus() to the function .devinit.text:pci_scan_bus_parented() The function pci_versatile_scan_bus() references the function __devinit pci_scan_bus_parented(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-22ARM: AMBA: Add pclk definition for platforms using primecellsRussell King1-1/+6
Add a dummy clk definition for the APB pclk signal on all platforms using the AMBA bus infrastructure. This ensures that these platforms continue to work when the core amba bus code controls the APB pclk. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-18ARM: 6215/2: add character LCD platform data for RealView and VersatileLinus Walleij1-0/+16
This adds some platform data for the character LCD found in the RealView and Versatile reference designs from ARM. Signed-off-by: Linus Walleij <triad@df.lth.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-15ARM: 6228/1: PL022 SSP platform data for the VersatileLinus Walleij1-1/+11
This adds platform data for the PL022 to the ARM Versatile reference design, and adds the necessary clock definition. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-17Merge branch 'devel-stable' into develRussell King2-1/+1
Conflicts: arch/arm/Kconfig arch/arm/include/asm/system.h arch/arm/mm/Kconfig
2010-05-02ARM: Indirect round/set_rate operations through clk structureRussell King2-3/+9
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: Make Integrator/Versatile/Reaview VCO code similarRussell King2-6/+6
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: Realview/Versatile: separate out common sched_clock()Russell King1-22/+0
Provide a common sched_clock() implementation for Versatile and Realview. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: Realview/Versatile/Integrator: remove unused definitions from platform.hRussell King1-24/+2
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: Realview/Versatile: separate out common SP804 timer codeRussell King1-132/+3
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: Realview/Versatile/Integrator: separate out common clock codeRussell King5-88/+11
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: ICST: kill duplicate icst codeRussell King2-6/+6
The only difference between ICST307 and ICST525 are the two arrays for calculating the S parameter; the code is now identical. Merge the two files and kill the duplicated code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: ICST: indirect s2div and idx2s arrays via icst_paramsRussell King1-0/+2
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: ICST: move minimum VCO frequency to icst_paramsRussell King1-0/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: ICST: use Hz instead of kHzRussell King2-5/+5
This makes the ICST support fit more nicely with the clk API, eliminating the need to *1000 and /1000 in places. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: ICST: provide definitions for max/min VCO frequenciesRussell King1-1/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: ICST: merge common ICST VCO structuresRussell King3-7/+8
The structures for the ICST307 and ICST525 VCO devices are identical, so merge them together. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-29ARM: Fix Versatile&Integrator includes to behave in the same way as RealviewRussell King3-3/+5
Realview doesn't include mach/platform.h in mach/hardware.h, so make versatile behave in the same way. Also, move the definition of __io_address() into mach/hardware.h, just like Realview. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2-1/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-25 08:55:24 +0300