summaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile/setup-r8a7791.c
AgeCommit message (Collapse)AuthorFilesLines
2014-10-30ARM: shmobile: r8a7791: Remove legacy codeLaurent Pinchart1-180/+1
All r8a7791 boards are now used with multiplatform kernels only. We can remove all the unused r8a7791 legacy device and clock registration code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-27ARM: shmobile: Remove FSF address from copyright headersLaurent Pinchart1-4/+0
The information is already included in the COPYING file in the kernel sources root directory, we don't want to modify all source files when the FSF will move to a new address, and I'm tired of seeing the related checkpatch.pl warnings. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-17ARM: shmobile: koelsch-reference: Enable CMT0 in device treeLaurent Pinchart1-6/+1
No more device needs to be added from platform code when booting the reference platform, remove the now empty r8a7791_add_dt_devices() function completely. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-08Merge tag 'soc-for-3.17' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This is the bulk of new SoC enablement and other platform changes for 3.17: - Samsung S5PV210 has been converted to DT and multiplatform - Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms - Kirkwood, one of the popular Marvell platforms, is folded into the mvebu platform code, removing mach-kirkwood - Hwmod data for TI AM43xx and DRA7 platforms - More additions of Renesas shmobile platform support - Removal of plat-samsung contents that can be removed with S5PV210 being multiplatform/DT-enabled and the other two old platforms being removed New platforms (most with only basic support right now): - Hisilicon X5HD2 settop box chipset is introduced - Mediatek MT6589 (mobile chipset) is introduced - Broadcom BCM7xxx settop box chipset is introduced + as usual a lot other pieces all over the platform code" * tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits) ARM: hisi: remove smp from machine descriptor power: reset: move hisilicon reboot code ARM: dts: Add hix5hd2-dkb dts file. ARM: debug: Rename Hi3716 to HIX5HD2 ARM: hisi: enable hix5hd2 SoC ARM: hisi: add ARCH_HISI MAINTAINERS: add entry for Broadcom ARM STB architecture ARM: brcmstb: select GISB arbiter and interrupt drivers ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs ARM: configs: enable SMP in bcm_defconfig ARM: add SMP support for Broadcom mobile SoCs Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ...
2014-08-08Merge tag 'cleanup-for-3.17' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This merge window brings a good size of cleanups on various platforms. Among the bigger ones: - Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have lacked active support for quite a while, and after asking around nobody showed interest in keeping them around. If needed, they could be resurrected in the future but it's more likely that we would prefer reintroduction of them as DT and multiplatform-enabled platforms instead. - OMAP4 controller code register define diet. They defined a lot of registers that were never actually used, etc. - Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate) to drivers/soc so it can be shared with 64-bit code. This also converts them over to traditional driver models where possible. - Removal of legacy gpio-samsung driver, since the last users have been removed (moved to pinctrl) Plus a bunch of smaller changes for various platforms that sort of dissapear in the diffstat for the above. clps711x cleanups, shmobile header file refactoring/moves for multiplatform friendliness, some misc cleanups, etc" * tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits) drivers: CCI: Correct use of ! and & video: clcd-versatile: Depend on ARM video: fix up versatile CLCD helper move MAINTAINERS: Add sdhci-st file to ARCH/STI architecture ARM: EXYNOS: Fix build breakge with PM_SLEEP=n MAINTAINERS: Remove Kirkwood ARM: tegra: Convert PMC to a driver soc/tegra: fuse: Set up in early initcall ARM: tegra: Always lock the CPU reset vector ARM: tegra: Setup CPU hotplug in a pure initcall soc/tegra: Implement runtime check for Tegra SoCs soc/tegra: fuse: fix dummy functions soc/tegra: fuse: move APB DMA into Tegra20 fuse driver soc/tegra: Add efuse and apbmisc bindings soc/tegra: Add efuse driver for Tegra ARM: tegra: move fuse exports to soc/tegra/fuse.h ARM: tegra: export apb dma readl/writel ARM: tegra: Use a function to get the chip ID ARM: tegra: Sort includes alphabetically ARM: tegra: Move includes to include/soc/tegra ...
2014-07-24platform: Remove most references to platform_bus devicePawel Moll1-4/+4
A number of board files in arch/arm and arch/unicore32 explicitly reference platform_bus device as a parent for new platform devices. This is unnecessary, as platform device API guarantees that devices with NULL parent are going to by adopted by the mentioned "root" device. This patch removes or replaces with NULL such references. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-25ARM: shmobile: Move r8a7791.hGeert Uytterhoeven1-1/+3
Change location of r8a7791.h so it can be included as "r8a7791.h" instead of the old style <mach/r8a7791.h> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-17ARM: shmobile: Add shared R-Car Gen2 CMA reservation codeMagnus Damm1-0/+1
Add R-Car Gen2 CMA memory reservation code that can be shared between multiple SoCs and boards. At this point r8a7790 and r8a7791 are supported. The top 256MiB of the legacy 32-bit physical memory space is assigned to a separate CMA area that may be assigned to various devices later on. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> [horms+renesas@verge.net.au: rebased] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-17ARM: shmobile: Use shmobile_init_late() on r8a7791 DT-onlyMagnus Damm1-0/+1
Tie in shmobile_init_late for the DT-only r8a7791 SoC Multiplatform support code. This will make sure that Suspend-to-RAM, CPUIdle and CPUFreq get initialized. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-17ARM: shmobile: Move rcar-gen2.h, cleanup r8a7790 caseMagnus Damm1-1/+1
Change location of rcar-gen2.h so it can be used as #include "rcar-gen2.h" instead of the old style #include <mach/rcar-gen2.h>. Also clean up the r8a7790 case to follow the same style as r8a7791. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-17ARM: shmobile: Move common.hMagnus Damm1-1/+1
Change location for common.h so it can be used as #include "common.h" instead of the old style #include <mach/common.h>. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-17ARM: shmobile: Move most of irqs.h, keep some for pinctlMagnus Damm1-1/+1
Move most of irqs.h so it can be used as #include "irqs.h" instead of the old style #include <mach/irqs.h>. Legacy code in drivers/pinctrl needs more work to get rid of the "mach" portion of the include path, so some part is left in the original location. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> [horms+renesas@verge.net.au: Do not add trailing blank line to irqs.h] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-03Merge tag 'boards-for-3.16' of ↵Linus Torvalds1-14/+11
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull ARM SoC board support updates from Olof Johansson: "The bulk of this branch is updates for Renesas Shmobile. They are still doing some enablement for classic boards first, and then come up with DT bindings when they've had a chance to learn more about the hardware. Not necessarily a bad way to go about it, and they're looking at moving some of the temporary board code resulting from it to drivers/staging instead to avoid the churn here. As a result of the shmobile clock cleanups, we end up merging quite a bit of SH code here as well. We ended up merging it here instead of in the cleanup branch due to the other board changes depending on it" * tag 'boards-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (130 commits) ARM: davinci: remove checks for CONFIG_USB_MUSB_PERIPHERAL ARM: add drivers for Colibri T30 to multi_v7_defconfig ARM: shmobile: Remove Genmai reference DTS ARM: shmobile: Let Genmai multiplatform boot with Genmai DTB ARM: shmobile: Sync Genmai DTS with Genmai reference DTS ARM: shmobile: genmai-reference: Remove legacy clock support ARM: shmobile: Remove non-multiplatform Genmai reference support ARM: configs: enable XHCI mvebu support in multi_v7_defconfig ARM: OMAP: replace checks for CONFIG_USB_GADGET_OMAP ARM: OMAP: AM3517EVM: remove check for CONFIG_PANEL_SHARP_LQ043T1DG01 ARM: OMAP: SX1: remove check for CONFIG_SX1_OLD_FLASH ARM: OMAP: remove some dead code ARM: OMAP: omap3stalker: remove two Kconfig macros ARM: tegra: tegra_defconfig updates ARM: shmobile: r7s72100: use workaround for non DT-clocks ARM: shmobile: Add forward declaration of struct clk to silence warning ARM: shmobile: r7s72100: remove SPI DT clocks from legacy clock support ARM: shmobile: r7s72100: add spi clocks to dtsi ARM: shmobile: r7s72100: remove I2C DT clocks from legacy clock support ARM: shmobile: r7s72100: add i2c clocks to dtsi ...
2014-05-14ARM: shmobile: koelsch: Enable SCIF0 and SCIF1 serial ports in DTLaurent Pinchart1-5/+5
SCIF0 and SCIF1 are used as debug serial ports. Enable them and configure pinmuxing appropriately. We can now remove the clkdev registration hack for SCIF devices from the Koelsch reference board file. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [horms+renesas@verge.net.au: added aliases to avoid device renumbering] [horms+renesas@verge.net.au: resolved conflicts] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-12ARM: shmobile: Remove unused r8a7791_init_early()Magnus Damm1-7/+0
Remove the now unused r8a7791_init_early() function. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-12ARM: shmobile: Use r8a7791 DT CPU Frequency in common caseMagnus Damm1-1/+1
Convert the common C-code-less r8a7791 DT board support to use shmobile_init_delay() to be able to migrate away from per-SoC delay setup functions. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-11ARM: shmobile: r8a7791: Switch to new style CMT deviceLaurent Pinchart1-10/+7
The CMT (Compare Match Timer) driver implements a new style of platform data that handles the timer as a single device with multiple channel. Switch from the old-style platform data to the new-style platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [horms+renesas@verge.net.au resolved conflict: use clk_names] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-14ARM: shmobile: Update r8a7791 CPU freq to 1500MHz in CMagnus Damm1-1/+1
The correct maximum CPU frequency for r8a7791 is 1500 MHz so update the r8a7791 SoC C code to reflect this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7791: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-5/+4
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7791: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-5/+10
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7791: Don't define SCIF platform data in an arrayLaurent Pinchart1-73/+52
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Add r8a7791 thermal platform deviceMagnus Damm1-0/+12
Add a thermal platform device for the legacy case on the r8a7791 SoC. This keeps the r8a7791 in sync with the r8a7790 sister device. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: r8a7791 GPIO platform device supportMagnus Damm1-0/+40
Add GPIO controller platform devices for the r8a7791 SoC. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: r8a7791 PFC platform device supportMagnus Damm1-0/+13
Add a platform device for the r8a7791 PFC device. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7791 SMP supportMagnus Damm1-0/+1
Tie in the APMU SMP code on r8a7791. When used together with the secondary CPU device node and smp_ops in the board specific code then this will allow use of the two Cortex-A15 cores in the r8a7791 SoC. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7791 Arch timer workaroundMagnus Damm1-0/+2
Make use of the R-Car Gen2 arch timer workaround on r8a7791. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7791 IRQC platform device supportMagnus Damm1-0/+27
Add a platform device for the r8a7791 IRQC hardware driving IRQ pins IRQ0 to IRQ9. The Linux interrupt number is statically assigned to allow board code written in C to make use of static interrupt numbers. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: Introduce r8a7791_add_standard_devices()Magnus Damm1-0/+5
Introduce the function r8a7791_add_standard_devices() that follows the same style as other mach-shmobile SoC code and allows C version of board code to add on-chip devices. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: r8a7791 CMT supportMagnus Damm1-0/+29
Add r8a7791 CMT support via channel 0 of CMT0. At this point the CMT is used for clock event operation, but in the future the arch timer will be the main timer and the CMT will be used for deep sleep wake up only. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> (cherry picked from commit a7663b88280d00359715817620798e99d54d401c) Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: r8a7791 SCIF supportYoshikazu Fujikawa1-0/+82
Add SCIF serial port support to the r8a7791 SoC by adding platform devices for SCIFA0 -> SCIFA5 as well as SCIFB0 -> SCIFB2 and SCIF0 -> SCIF5 together with clock bindings. DT device description is excluded at this point since such bindings are still under development. Signed-off-by: Yoshikazu Fujikawa <yoshikazu.fujikawa.ue@renesas.com> Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> [damm@opensource.se: Forward ported to upstream, dropped holes in enum] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Initial r8a7791 SoC supportHisashi Nakamura1-0/+38
Add initial support for the r8a7791 SoC including: - Single Cortex-A15 CPU Core - GIC No static virtual mappings are used, all the components make use of ioremap(). DT_MACHINE_START is still wrapped in CONFIG_USE_OF to match other mach-shmobile code. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> [damm@opensource.se: Forward ported to upstream, dropped not-yet-ready code] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-21 11:00:00 +0300