summaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c6410/mach-smdk6410.c
AgeCommit message (Collapse)AuthorFilesLines
2010-01-26ARM: S3C64XX: Merge mach-s3c6400 and mach-s3c6410Ben Dooks1-491/+0
As per discussions with Russell King on linux-arm-kernel, it appears that both mach-s3c6400 and mach-s3c6410 are so close together that they should simply be merged into mach-s3c64xx. Note, this patch does not eliminate any of the bits that are still common, it is simply a move of the two directories together, any further common code will be eliminated or moved in further patches. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21ARM: SMDK6410: Set up interrupt range for WM835x on 1190-EV1 PMIC boardMark Brown1-0/+1
The WM835x driver won't actually use this yet but it will in the future when the changes converting it to genirq are merged. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: Merge next-samsung-devupdates1Ben Dooks1-1/+1
Merge branch 'next-samsung-devupdates1' into next-samsung-try7
2010-01-18ARM: SMDK6410: Add comments on ethernet connectivityAndy Green1-0/+10
LAN9115 Ethernet only works on SMDK6410 if certain switches are set in specific ways. Document the requirement. Signed-off-by: Andy Green <andy@warmcat.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-18ARM: SMDK6410: Add nC1 chipselect SROM setupAndy Green1-2/+25
Since the mach-smdk6410.c file claims it can start up the smsc9115 ethernet device on the board, it should take care about configuring the necessary chip select nCS1 so it can see the chip. The select defaults to 8-bit mode so without config the Ethernet doesn't work. This patch uses the new SROM definitions to set nCS1 to the state found in the Samsung U-Boot port for 6410. It may be more conservative that it needs to be since those settings were marked as for CS8900A also using this chip select. But this change is enough to get the ethernet working when booted with Qi. Signed-off-by: Andy Green <andy@warmcat.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S3C: Rename s3c_device_usb to s3c_device_ohciBen Dooks1-1/+1
Prepare for the forthcoming device changes by renaming s3c_device_usb to s3c_device_ohci as this is what the device represents. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SMDK6410: Specify no GPIO for B_PWR_5V regulatorMark Brown1-0/+1
Since the fixed voltage regulator grew support for GPIO based enables and GPIO 0 is valid on some systems we need to specify that there is no valid GPIO enable control. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01ARM: SMDK6410: Hook up regulator supplies for WM8580Mark Brown1-0/+52
DVDD is supplied by supplies derived from the PMIC, AVDD and PVDD are supplied from the main wall supply on the base board which runs at 5V. No option is currently supported for running without a PMIC card, the assumption is that the regulator API will be built out when no soft PMIC card is in use. To ease merge issues since this uses the newly added dev_name supply configuration from the regulator API (currently in -next only) the fixed voltage regulator is ifdefed out when the regulator API is not enabled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-10ARM: SMDK6410: Configure GPIO pull up for WM835x IRQ lineMark Brown1-0/+3
When used with the WM1190-EV1 board we can use the internal pull up resistor of the CPU to provide the required pull for the IRQ line. Without this interrupts from the WM835x don't work in the default WM1190-EV1 hardwaer configuration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-14ARM: S3C64XX: Add UART2,UART3 support for SMDK6410 (resend)Matt Hsu1-6/+20
Add proper uartcfg for UART port 2,3 and tidy it up on SMDK6410. Signed-off-by: Matt Hsu <matt@0xlab.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-17[ARM] SMDK6410: Add USB high-speed/OtG gadget deviceBen Dooks1-0/+1
Add the USB gadget support to the SMDK6410. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] Merge next-s3c-s3c6410 into for-rmk-develBen Dooks1-0/+196
Merge branch 'next-s3c-s3c6410' into for-rmk-devel
2009-05-07[ARM] SMDK6410: Add USB OHCI hostBen Dooks1-0/+1
Add USB OHCI host capability to the SMDK6410 for either USB OtG or a single/double USB host port. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Hook regulator control of VDDARM up for WM1190-EV1Mark Brown1-0/+9
This allows the S3C CPUfreq driver to do DVFS. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Mark all supplies as always_onMark Brown1-0/+3
Since no consumers are currently configured for the SMDK6410 mark all the supplies on the board as being always_on, ensuring interoperability with future regulator API changes to disable unused regulators. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Use active high IRQ for the WM8350 on the WM1190-EV1Mark Brown1-0/+1
Using an active high IRQ ensures that the WM8350 interrupt handling does not spin when used with a SMDK6410 which has not had R20 removed and R21 fitted to connect EINT12 to the PMIC module rather thant the fixed regulators on the CPU module. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Support WM1190-EV1 PMIC boardMark Brown1-0/+131
The SMDK6410 supports pluggable PMIC boards. One such board is the Wolfson Microelectronics 1190-EV1 for the WM8350 PMICs. This patch introduces initial support for this module. Further patches will add additional integration with the system as support for the S3C6410 and other devices on the system improves. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Add support for SMSC9115 ethernet controllerMark Brown1-0/+35
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Ensure LCD settings are setupBen Dooks1-0/+17
Ensure that the LCD output type is RGB and that the modem interface is not bypassing the LCD block. This ensures the LCD interface output gets to the pins in the correct format. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-15[ARM] SMDK6410: Request GPIOs for LCD power controlMark Brown1-0/+4
Going forward gpio_request() will be a requirement for GPIO API users so call it for the LCD power GPIOs. With present code the kernel functions but generaets loud WARN_ON()s when using the unrequested GPIOs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-02-27[ARM] SMDK6410: Declare iodesc table staticMark Brown1-1/+1
Shuts up a warning. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-02-27[ARM] SMDK6410: Correct I2C device name for WM8580Mark Brown1-1/+1
The WM8580 driver registers itself as "wm8580" rather than "WM8580". Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18Merge branch 'next-s3c64xx-device' into next-mergedBen Dooks1-0/+96
Conflicts: arch/arm/mach-s3c2440/mach-at2440evb.c
2008-12-16[ARM] SMDK6410: Add LCD (LCD48WVGA) definitionsBen Dooks1-0/+71
Add support for the LCD 48WVGA module attached to the SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16[ARM] SMDK6410: Add availability of second hsmmc channelBen Dooks1-1/+5
Add SDHCI channel 1. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16[ARM] S3C64XX: Fix missing definition of s3c64xx_init_io()Ben Dooks1-2/+0
The function s3c64xx_init_io was missing from <plat/cpu.h> and was masked by the SMDK6410 having an local definition. Fix by removing the SMDK6410 variant and adding it to the relevant <plat/cpu.h> file. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16[ARM] SMDK6410: Add I2C device board informationBen Dooks1-0/+15
Add the I2C devices on the SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16[ARM] SMDK6410: Add second I2C channel.Ben Dooks1-0/+2
Add the second I2C channel on the SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16[ARM] SMDK6410: Add i2c deviceBen Dooks1-0/+3
Add i2c bus 0 to the configuration Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16[ARM] SMDK6410: Add HSMMC0 deviceBen Dooks1-0/+1
Add HSMMC0 device to SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16[ARM] SMDK6410: Initial machine supportBen Dooks1-0/+91
Initial machine support for the Samsung SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-08 00:27:35 +0300