summaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa/generic.c
AgeCommit message (Collapse)AuthorFilesLines
2010-10-09ARM: pxa: reduce the scope of get_memclk_frequency_10khz()Haojian Zhuang1-2/+1
Up to now, only pxa2xx pcmcia driver is using the API. No other device driver is using this API in PXA3xx or any other PXA silicons. Restrict the scope only on pxa2xx and remove the implementation of pxa3xx. So we can avoid oo much checking on cpuid after more pxa chips supported. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09ARM: pxa: reduce the scope of get_clk_frequency_khz()Haojian Zhuang1-2/+1
get_clk_frequency_khz() is used in private cpufreq driver. In order to meet the change of different pxa silicons, checking cpuid is introduced in get_clk_frequency_khz(). While more pxa silicons are supported, the workload of checking cpuid is higher. So restrict the scope of get_clk_frequency_khz() on pxa2xx. Different pxa silcions use different private cpufreq driver to avoid too much checking on cpuid. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: remove pxa_gpio_mode() and filesEric Miao1-31/+0
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-03-09[ARM] pxa: move GPIO register definitions into <mach/gpio.h>Eric Miao1-1/+1
This makes gpio.c fully independent of pxa-regs.h (except for the virtual address of the registers). Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09[ARM] pxa: move pxa_gpio_mode() outside of generic gpio.cEric Miao1-0/+31
Looks like we have to live with pxa_gpio_mode() for a while, giving its presence is actually making gpio.c not generic enough, let's move it temporarily outside before it can be fully purged. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-29[ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constantEric Miao1-0/+16
As Nicolas and Russell pointed out, CLOCK_TICK_RATE is no more a constant on PXA when multiple processors and platforms are selected, change TIMER_FREQ in rtc-sa1100.c into a variable. Since the code to decide the clock tick rate is re-used from timer.c, introduce a common get_clock_tick_rate() for this. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@marvell.com>
2008-10-07[ARM] ohci-pxa27x: use ioremap() and offset for register accessEric Miao1-5/+0
This avoid the pre-mapping of OHCI controller register space, and the mapping is made only when necessary (OHCI is probed). Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-25[ARM] pxa: make cpu_is_pxa2* macros more consistentEric Miao1-2/+2
1. add a CPUID table in the comment 2. make cpu_is_pxa25x() true for PXA210/250/255/26x 3. PXA210 is treated as PXA25x, all related code modified to reflect this Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07Merge branch 'for-rmk' of ↵Russell King1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 Conflicts: arch/arm/mach-pxa/generic.c arch/arm/mach-pxa/pxa25x.c arch/arm/mach-pxa/pxa27x.c arch/arm/mach-pxa/pxa2xx.c arch/arm/mach-pxa/pxa3xx.c arch/arm/mach-pxa/reset.c arch/arm/mach-pxa/spitz.c arch/arm/mach-pxa/tosa.c drivers/watchdog/sa1100_wdt.c
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King1-2/+2
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King1-1/+1
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-05[ARM] pxa: introduce reset_status and clear_reset_status for driver's usageEric Miao1-0/+10
Due to the problem of reset status bits being handled by different registers between pxa2xx and pxa3xx, introduce a global reset_status variable, initialized by SoC-specific code and later being used by other drivers. And also introduce clear_reset_status(), which is used to clear the corresponding status bits. Pass RESET_STATUS_ALL to clear all bits. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-07-09[ARM] pxa: remove pxa_set_cken()Russell King1-18/+0
pxa_set_cken() is now unused, remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02[ARM] pxa: separate out power manager and clock registersRussell King1-0/+1
The power manager and core clock registers aren't present in PXA3 CPUs. Move them out of pxa-regs.h into pxa2xx-regs.h, and include pxa2xx-regs.h where necessary. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-30pxafb: convert fb driver to use ioremap() and __raw_{readl, writel}eric miao1-5/+0
This is part of the effort moving peripheral registers outside of pxa-regs.h, and using ioremap() make it possible the same IP can be re-used on different processors with different registers space As a result, the fixed mapping in pxa_map_io() is removed. The regs-lcd.h can actually moved to where closer to pxafb.c but some of its bit definitions are directly used by various platform code, though this is not a good style. Signed-off-by: eric miao <eric.miao@marvell.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-19[ARM] pxa: move GPIO sysdev outside of generic.c into gpio.ceric miao1-62/+0
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-05gpiolib support for the PXA architecturePhilipp Zabel1-93/+0
This adds gpiolib support for the PXA architecture: - move all GPIO API functions from generic.c into gpio.c - convert the gpio_get/set_value macros into inline functions This makes it easier to hook up GPIOs provided by external chips like ASICs and CPLDs. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Jean Delvare <khali@linux-fr.org> Cc: Eric Miao <eric.miao@marvell.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Minor ARM fixup from David Brownell folded into this ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04[ARM] pxa: introduce sysdev for GPIO register saving/restoringeric miao1-0/+57
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] pxa: increase size of memory mappingRussell King1-1/+1
The mapping for physical address 0x48000000 is not sufficient to allow access to the dynamic memory controller configuration registers on PXA3. These registers need to be accessed to reconfigure the SDRAM when waking from a low power mode. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] pxa: create arch/arm/mach-pxa/device.c for all on-chip deviceseric miao1-548/+0
Considering that generic.c is getting more and more bloated by device information, moving that part out side will be much cleaner. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] 4711/1: pxa: mmc: move DMA specific code to platform layerBridge Wu1-0/+10
This patch is to move pxamci DMA specific code to corresponding platform layer because using DRCMRRXMMC/DRCMRTXMMC in pxamci.c makes the driver code dedicated to platform which is not extensible. It is applicable to all pxa platforms. Signed-off-by: Bridge Wu <bridge.wu@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] pxa: define SSP platform devices for pxa2xx/pxa3xxeric miao1-0/+277
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] pxa: avoid always registering MMC, I2C, IrDA and framebuffer devicesRussell King1-4/+16
Only register the MMC, framebuffer, I2C and FICP devices when the platform supplies the necessary platform data structures for the devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15[ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put()Russell King1-0/+38
pxa_gpio_mode() is a universal call that fiddles with the GAFR (gpio alternate function register.) GAFR does not exist on PXA3 CPUs, but instead the alternate functions are controlled via the MFP support code. Platforms are expected to configure the MFP according to their needs in their platform support code rather than drivers. We extend this idea to the GAFR, and make the gpio_direction_*() functions purely operate on the GPIO level. This means platform support code is entirely responsible for configuring the GPIOs alternate functions on all PXA CPU types. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15[ARM] pxa: PXA3xx base supporteric miao1-2/+6
Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-13[ARM] 4559/1: pxa: make PXA_LAST_GPIO a run-time variableeric miao1-1/+2
This definition produces processor specific code in generic function pxa_gpio_mode(), thus creating inconsistencies for support of pxa25x and pxa27x in a single zImage. As David Brownell suggests, make it a run-time variable and initialize at run-time according to the number of GPIOs on the processor. For now the initialization happens in pxa_init_irq_gpio(), since there is already a parameter for that, besides, this is and MUST be earlier than any subsequent calls to pxa_gpio_mode(). Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-13[ARM] pxa: mark pxa_set_cken deprecatedRussell King1-2/+2
Allow the generic clock support code to fiddle with the CKEN register and mark pxa_set_cken() deprecated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-13[ARM] pxa: remove get_lcdclk_frequency_10khz()Russell King1-12/+0
get_lcdclk_frequency_10khz() is now redundant, remove it. Hide pxa27x_get_lcdclk_frequency_10khz() from public view. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-13[ARM] pxa: fix naming of memory/lcd/core clock functionsRussell King1-0/+38
Rename pxa25x and pxa27x memory/lcd/core clock functions, and select the correct version at run time. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-13[ARM] pxa: convert PXA serial drivers to use platform resourcesRussell King1-0/+59
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-13[ARM] 4550/1: sched_clock on PXA should cope with run time clock rate selectionNicolas Pitre1-62/+0
The previous implementation was relying on compile time optimizations based on a constant clock rate. However, support for different PXA flavors in the same kernel binary requires that the clock be selected at run time, so here it is. Let's move this code to a more appropriate location while at it. Signed-off-by: Nicolas Pitre <npitre@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20[ARM] 4480/1: pxa: change the pxa device naming schemeEric Miao1-16/+16
1. for common devices across all the pxa variants, the names are changed to be: "pxa_device_xxx" 2. for pxa25x or pxa27x specific devices, the names are changed to be: "pxa25x_device_xxx", or "pxa27x_device_xxx" Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] pxa: move platform devices to separate header fileRussell King1-0/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] pxa: move device registration into CPU-specific fileRussell King1-72/+18
This allows individual CPU support to determine which platform devices should be registered. Also fix a copy-n-paste bug in the I2C power platform device entry. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] pxa: introduce cpu_is_pxaXXX macrosRussell King1-4/+2
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-22[ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXXEric Miao1-2/+2
This patch removes the unnecessary bit number from CKENnn_XXXX definitions for PXA, so that CKEN0_PWM0 --> CKEN_PWM0 CKEN1_PWM1 --> CKEN_PWM1 ... CKEN24_CAMERA --> CKEN_CAMERA The reasons for the change of these defitions are: 1. they do not scale - they are currently valid for pxa2xx, but definitely not valid for pxa3xx, e.g., pxa3xx has bit 3 for camera instead of bit 24 2. they are unnecessary - the peripheral name within the definition has already announced its usage, we don't need those bit numbers to know which peripheral we are going to enable/disable clock for 3. they are inconvenient - think about this: a driver programmer for pxa has to remember which bit in the CKEN register to turn on/off Another change in the patch is to make the definitions equal to its clock bit index, so that #define CKEN_CAMERA (24) instead of #define CKEN_CAMERA (1 << 24) this change, however, will add a run-time bit shift operation in pxa_set_cken(), but the benefit of this change is that it scales when bit index exceeds 32, e.g., pxa3xx has two registers CKENA and CKENB, totally 64 bit for this, suppose CAMERA clock enabling bit is CKENB:10, one can simply define CKEN_CAMERA to be (32 + 10) and so that pxa_set_cken() need minimum change to adapt to that. Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-21[PATCH] GPIO API: PXA wrapper cleanupPhilipp Zabel1-1/+27
Based on the discussion last december (http://lkml.org/lkml/2006/12/20/242), this patch: - moves the PXA_LAST_GPIO check into pxa_gpio_mode - fixes comment and includes in gpio.h - replaces the gpio_set/get_value macros with inline functions and adds a non-inline version to avoid code explosion when gpio is not a constant. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Nicolas Pitre <nico@cam.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-08[ARM] 4144/1: Fix for patch #4099/1 with CONFIG_I2C_PXA_SLAVE setGuennadi Liakhovetski1-0/+24
Switch the i2c-pxa driver to actually using the platform device information and let it handle the power i2c bus on pxa27x too. Original version of this patch didn't compile with CONFIG_I2C_PXA_SLAVE set. Signed-off-by: G. Liakhovetski <gl@dsa-ac.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-30[ARM] 4066/1: correct a comment about PXA's sched_clock rangeNicolas Pitre1-1/+3
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07[ARM] 3981/1: sched_clock for PXA2xxNicolas Pitre1-0/+60
Here's a 63-bit implementation of shed_clock() for PXA2xx. The actual period depends on the value of CLOCK_TICK_RATE and whether or not reduced scaling factors were provided for it. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-02[ARM] 3848/1: pxafb: Add option of fixing video modes and spitz QVGA mode ↵Richard Purdie1-8/+5
support Add the ability to have pxafb use only certain fixed video modes (selected on a per platform basis). This is useful on production hardware such as the Zaurus cxx00 models where the valid modes are known in advance and any other modes could result in hardware damage. Following this, add support for the cxx00 QVGA mode. Mode information is passed to the lcd_power call to allowing the panel drivers to configure the display hardware accordingly (corgi_lcd already contains the functionality for the cxx00 panel). This mirrors the setup already used by w100fb. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-27[PATCH] RTC subsystem: SA1100/PXA2XX driverRichard Purdie1-0/+6
Add an RTC subsystem driver for the ARM SA1100/PXA2XX processor RTC. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds1-1/+1
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31[PATCH] fix missing includesTim Schmielau1-0/+1
I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29Create platform_device.h to contain all the platform device details.Russell King1-1/+1
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[ARM] 2897/2: PXA2xx IRDA supportNicolas Pitre1-0/+18
Patch from Nicolas Pitre This is the PXA2xx common IRDA driver, plus platform support for Lubbock and Mainstone. Signed-off-by: Nicolas Pitre <nico@cam.org> Acked-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 3029/1: Add HWUART support for PXA 255/26xMatt Reimer1-1/+17
Patch from Matt Reimer Adds support for HWUART on PXA 255 / 26x. This patch originally came from http://svn.rungie.com/svn/gumstix-buildroot/trunk/sources/kernel-patches/000-gumstix-hwuart.patch and has been tweaked by me. Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 3048/1: register i2s resources not i2c resources for the pxa i2s ↵Ian Campbell1-1/+1
platform device Patch from Ian Campbell As noted by Uli Luckas in the comments of 3025 there is a typo in the i2s platform device. The i2s platform device refers to the i2c resources. Signed-off-by: Ian Campbell <icampbell@arcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 2988/1: Replace map_desc.physical with map_desc.pfn: PXADeepak Saxena1-8/+36
Patch from Deepak Saxena PXA map_desc.pfn conversion Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-21[ARM] 3025/1: Add I2S platform device for PXAMatt Reimer1-0/+20
Patch from Matt Reimer Adds an I2S platform_device for PXA. I2S is used to interface with sound chips on systems like iPAQ h1910/h2200/hx4700 and Asus 716. Signed-off-by: mreimer@vpop.net Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 20:06:58 +0300