summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2
AgeCommit message (Collapse)AuthorFilesLines
2016-09-29ARM: OMAP3: hwmod data: Add sysc information for DSISebastian Reichel1-0/+12
commit b46211d6dcfb81a8af66b8684a42d629183670d4 upstream. Add missing sysconfig/sysstatus information to OMAP3 hwmod. The information has been checked against OMAP34xx and OMAP36xx TRM. Without this change DSI block is not reset during boot, which is required for working Nokia N950 display. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2016-05-18ARM: OMAP3: Fix booting with thumb2 kernelTony Lindgren1-20/+2
commit d8a50941c91a68da202aaa96a3dacd471ea9c693 upstream. We get a NULL pointer dereference on omap3 for thumb2 compiled kernels: Internal error: Oops: 80000005 [#1] SMP THUMB2 ... [<c046497b>] (_raw_spin_unlock_irqrestore) from [<c0024375>] (omap3_enter_idle_bm+0xc5/0x178) [<c0024375>] (omap3_enter_idle_bm) from [<c0374e63>] (cpuidle_enter_state+0x77/0x27c) [<c0374e63>] (cpuidle_enter_state) from [<c00627f1>] (cpu_startup_entry+0x155/0x23c) [<c00627f1>] (cpu_startup_entry) from [<c06b9a47>] (start_kernel+0x32f/0x338) [<c06b9a47>] (start_kernel) from [<8000807f>] (0x8000807f) The power management related assembly on omaps needs to interact with ARM mode bootrom code, so we need to keep most of the related assembly in ARM mode. Turns out this error is because of missing ENDPROC for assembly code as suggested by Stephen Boyd <sboyd@codeaurora.org>. Let's fix the problem by adding ENDPROC in two places to sleep34xx.S. Let's also remove the now duplicate custom code for mode switching. This has been unnecessary since commit 6ebbf2ce437b ("ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+"). And let's also remove the comments about local variables, they are now just confusing after the ENDPROC. The reason why ENDPROC makes a difference is it sets .type and then the compiler knows what to do with the thumb bit as explained at: https://wiki.ubuntu.com/ARM/Thumb2PortingHowto Reported-by: Kevin Hilman <khilman@kernel.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2016-05-03ARM: OMAP3: Add cpuidle parameters table for omap3430Pali Rohár1-1/+68
commit 98f42221501353067251fbf11e732707dbb68ce3 upstream. Based on CPU type choose generic omap3 or omap3430 specific cpuidle parameters. Parameters for omap3430 were measured on Nokia N900 device and added by commit 5a1b1d3a9efa ("OMAP3: RX-51: Pass cpu idle parameters") which were later removed by commit 231900afba52 ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") due to huge code complexity. This patch brings cpuidle parameters for omap3430 devices again, but uses simple condition based on CPU type. Fixes: 231900afba52 ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2016-05-02ARM: OMAP2+: hwmod: Fix updating of sysconfig registerLokesh Vutla1-4/+4
commit 3ca4a238106dedc285193ee47f494a6584b6fd2f upstream. Commit 127500ccb766f ("ARM: OMAP2+: Only write the sysconfig on idle when necessary") talks about verification of sysconfig cache value before updating it, only during idle path. But the patch is adding the verification in the enable path. So, adding the check in a proper place as per the commit description. Not keeping this check during enable path as there is a chance of losing context and it is safe to do on idle as the context of the register will never be lost while the device is active. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Cc: Jon Hunter <jonathanh@nvidia.com> Fixes: commit 127500ccb766 "ARM: OMAP2+: Only write the sysconfig on idle when necessary" [paul@pwsan.com: appears to have been caused by my own mismerge of the originally posted patch] Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2015-09-30ARM: OMAP2+: DRA7: clockdomain: change l4per2_7xx_clkdm to SW_WKUPVignesh R1-1/+1
commit b9e23f321940d2db2c9def8ff723b8464fb86343 upstream. Legacy IPs like PWMSS, present under l4per2_7xx_clkdm, cannot support smart-idle when its clock domain is in HW_AUTO on DRA7 SoCs. Hence, program clock domain to SW_WKUP. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2015-08-25ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without syscRoger Quadros1-8/+16
commit 9a258afa928b45e6dd2efcac46ccf7eea705d35a upstream. For hwmods without sysc, _init_mpu_rt_base(oh) won't be called and so _find_mpu_rt_port(oh) will return NULL thus preventing ready state check on those modules after the module is enabled. This can potentially cause a bus access error if the module is accessed before the module is ready. Fix this by unconditionally calling _init_mpu_rt_base() during hwmod _init(). Do ioremap only if we need SYSC access. Eventhough _wait_target_ready() check doesn't really need MPU RT port but just the PRCM registers, we still mandate that the hwmod must have an MPU RT port if ready state check needs to be done. Else it would mean that the module is not accessible by MPU so there is no point in waiting for target to be ready. e.g. this fixes the below DCAN bus access error on AM437x-gp-evm. [ 16.672978] ------------[ cut here ]------------ [ 16.677885] WARNING: CPU: 0 PID: 1580 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x234/0x35c() [ 16.687946] 44000000.ocp:L3 Custom Error: MASTER M2 (64-bit) TARGET L4_PER_0 (Read): Data Access in User mode during Functional access [ 16.700654] Modules linked in: xhci_hcd btwilink ti_vpfe dwc3 videobuf2_core ov2659 bluetooth v4l2_common videodev ti_am335x_adc kfifo_buf industrialio c_can_platform videobuf2_dma_contig media snd_soc_tlv320aic3x pixcir_i2c_ts c_can dc [ 16.731144] CPU: 0 PID: 1580 Comm: rpc.statd Not tainted 3.14.26-02561-gf733aa036398 #180 [ 16.739747] Backtrace: [ 16.742336] [<c0011108>] (dump_backtrace) from [<c00112a4>] (show_stack+0x18/0x1c) [ 16.750285] r6:00000093 r5:00000009 r4:eab5b8a8 r3:00000000 [ 16.756252] [<c001128c>] (show_stack) from [<c05a4418>] (dump_stack+0x20/0x28) [ 16.763870] [<c05a43f8>] (dump_stack) from [<c0037120>] (warn_slowpath_common+0x6c/0x8c) [ 16.772408] [<c00370b4>] (warn_slowpath_common) from [<c00371e4>] (warn_slowpath_fmt+0x38/0x40) [ 16.781550] r8:c05d1f90 r7:c0730844 r6:c0730448 r5:80080003 r4:ed0cd210 [ 16.788626] [<c00371b0>] (warn_slowpath_fmt) from [<c027fa94>] (l3_interrupt_handler+0x234/0x35c) [ 16.797968] r3:ed0cd480 r2:c0730508 [ 16.801747] [<c027f860>] (l3_interrupt_handler) from [<c0063758>] (handle_irq_event_percpu+0x54/0x1bc) [ 16.811533] r10:ed005600 r9:c084855b r8:0000002a r7:00000000 r6:00000000 r5:0000002a [ 16.819780] r4:ed0e6d80 [ 16.822453] [<c0063704>] (handle_irq_event_percpu) from [<c00638f0>] (handle_irq_event+0x30/0x40) [ 16.831789] r10:eb2b6938 r9:eb2b6960 r8:bf011420 r7:fa240100 r6:00000000 r5:0000002a [ 16.840052] r4:ed005600 [ 16.842744] [<c00638c0>] (handle_irq_event) from [<c00661d8>] (handle_fasteoi_irq+0x74/0x128) [ 16.851702] r4:ed005600 r3:00000000 [ 16.855479] [<c0066164>] (handle_fasteoi_irq) from [<c0063068>] (generic_handle_irq+0x28/0x38) [ 16.864523] r4:0000002a r3:c0066164 [ 16.868294] [<c0063040>] (generic_handle_irq) from [<c000ef60>] (handle_IRQ+0x38/0x8c) [ 16.876612] r4:c081c640 r3:00000202 [ 16.880380] [<c000ef28>] (handle_IRQ) from [<c00084f0>] (gic_handle_irq+0x30/0x5c) [ 16.888328] r6:eab5ba38 r5:c0804460 r4:fa24010c r3:00000100 [ 16.894303] [<c00084c0>] (gic_handle_irq) from [<c05a8d80>] (__irq_svc+0x40/0x50) [ 16.902193] Exception stack(0xeab5ba38 to 0xeab5ba80) [ 16.907499] ba20: 00000000 00000006 [ 16.916108] ba40: fa1d0000 fa1d0008 ed3d3000 eab5bab4 ed3d3460 c0842af4 bf011420 eb2b6960 [ 16.924716] ba60: eb2b6938 eab5ba8c eab5ba90 eab5ba80 bf035220 bf07702c 600f0013 ffffffff [ 16.933317] r7:eab5ba6c r6:ffffffff r5:600f0013 r4:bf07702c [ 16.939317] [<bf077000>] (c_can_plat_read_reg_aligned_to_16bit [c_can_platform]) from [<bf035220>] (c_can_get_berr_counter+0x38/0x64 [c_can]) [ 16.952696] [<bf0351e8>] (c_can_get_berr_counter [c_can]) from [<bf010294>] (can_fill_info+0x124/0x15c [can_dev]) [ 16.963480] r5:ec8c9740 r4:ed3d3000 [ 16.967253] [<bf010170>] (can_fill_info [can_dev]) from [<c0502fa8>] (rtnl_fill_ifinfo+0x58c/0x8fc) [ 16.976749] r6:ec8c9740 r5:ed3d3000 r4:eb2b6780 [ 16.981613] [<c0502a1c>] (rtnl_fill_ifinfo) from [<c0503408>] (rtnl_dump_ifinfo+0xf0/0x1dc) [ 16.990401] r10:ec8c9740 r9:00000000 r8:00000000 r7:00000000 r6:ebd4d1b4 r5:ed3d3000 [ 16.998671] r4:00000000 [ 17.001342] [<c0503318>] (rtnl_dump_ifinfo) from [<c050e6e4>] (netlink_dump+0xa8/0x1e0) [ 17.009772] r10:00000000 r9:00000000 r8:c0503318 r7:ebf3e6c0 r6:ebd4d1b4 r5:ec8c9740 [ 17.018050] r4:ebd4d000 [ 17.020714] [<c050e63c>] (netlink_dump) from [<c050ec10>] (__netlink_dump_start+0x104/0x154) [ 17.029591] r6:eab5bd34 r5:ec8c9980 r4:ebd4d000 [ 17.034454] [<c050eb0c>] (__netlink_dump_start) from [<c0505604>] (rtnetlink_rcv_msg+0x110/0x1f4) [ 17.043778] r7:00000000 r6:ec8c9980 r5:00000f40 r4:ebf3e6c0 [ 17.049743] [<c05054f4>] (rtnetlink_rcv_msg) from [<c05108e8>] (netlink_rcv_skb+0xb4/0xc8) [ 17.058449] r8:eab5bdac r7:ec8c9980 r6:c05054f4 r5:ec8c9980 r4:ebf3e6c0 [ 17.065534] [<c0510834>] (netlink_rcv_skb) from [<c0504134>] (rtnetlink_rcv+0x24/0x2c) [ 17.073854] r6:ebd4d000 r5:00000014 r4:ec8c9980 r3:c0504110 [ 17.079846] [<c0504110>] (rtnetlink_rcv) from [<c05102ac>] (netlink_unicast+0x180/0x1ec) [ 17.088363] r4:ed0c6800 r3:c0504110 [ 17.092113] [<c051012c>] (netlink_unicast) from [<c0510670>] (netlink_sendmsg+0x2ac/0x380) [ 17.100813] r10:00000000 r8:00000008 r7:ec8c9980 r6:ebd4d000 r5:eab5be70 r4:eab5bee4 [ 17.109083] [<c05103c4>] (netlink_sendmsg) from [<c04dfdb4>] (sock_sendmsg+0x90/0xb0) [ 17.117305] r10:00000000 r9:eab5a000 r8:becdda3c r7:0000000c r6:ea978400 r5:eab5be70 [ 17.125563] r4:c05103c4 [ 17.128225] [<c04dfd24>] (sock_sendmsg) from [<c04e1c28>] (SyS_sendto+0xb8/0xdc) [ 17.136001] r6:becdda5c r5:00000014 r4:ecd37040 [ 17.140876] [<c04e1b70>] (SyS_sendto) from [<c000e680>] (ret_fast_syscall+0x0/0x30) [ 17.148923] r10:00000000 r8:c000e804 r7:00000122 r6:becdda5c r5:0000000c r4:becdda5c [ 17.157169] ---[ end trace 2b71e15b38f58bad ]--- Fixes: 6423d6df1440 ("ARM: OMAP2+: hwmod: check for module address space during init") Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2015-04-09ARM: OMAP2+: hwmod: Rearm wake-up interrupts for DT when MUSB is idledTony Lindgren1-0/+4
commit cc824534d4fef0e46e4486d5c1e10d3c6b1ebadc upstream. Looks like MUSB cable removal can cause wake-up interrupts to stop working for device tree based booting at least for UART3 even as nothing is dynamically remuxed. This can be fixed by calling reconfigure_io_chain() for device tree based booting in hwmod code. Note that we already do that for legacy booting if the legacy mux is configured. My guess is that this is related to UART3 and MUSB ULPI hsusb0_data0 and hsusb0_data1 support for Carkit mode that somehow affect the configured IO chain for UART3 and require rearming the wake-up interrupts. In general, for device tree based booting, pinctrl-single calls the rearm hook that in turn calls reconfigure_io_chain so calling reconfigure_io_chain should not be needed from the hwmod code for other events. So let's limit the hwmod rearming of iochain only to HWMOD_FORCE_MSTANDBY where MUSB is currently the only user of it. If we see other devices needing similar changes we can add more checks for it. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2015-04-09ARM: OMAP4: Fix the boot regression with CPU_IDLE enabledSantosh Shilimkar1-4/+21
commit 4b353a706a86598ba47307c47301c3c428b79e09 upstream. On OMAP4 panda board, there have been several bug reports about boot hang and lock-ups with CPU_IDLE enabled. The root cause of the issue is missing interrupts while in idle state. Commit cb7094e8 {cpuidle / omap4 : use CPUIDLE_FLAG_TIMER_STOP flag} moved the broadcast notifiers to common code for right reasons but on OMAP4 which suffers from a nasty ROM code bug with GIC, commit ff999b8a {ARM: OMAP4460: Workaround for ROM bug ..}, we loose interrupts which leads to issues like lock-up, hangs etc. Patch reverts commit cb7094 {cpuidle / omap4 : use CPUIDLE_FLAG_TIMER_STOP flag} and 54769d6 {cpuidle: OMAP4: remove timer broadcast initialization} to avoid the issue. With this change, OMAP4 panda boards, the mentioned issues are getting fixed. We no longer loose interrupts which was the cause of the regression. Fixes: cb7094e8 (cpuidle / omap4 : use CPUIDLE_FLAG_TIMER_STOP flag) Fixes: ff999b8a (cpuidle: OMAP4: remove timer broadcast initialization) Cc: Roger Quadros <rogerq@ti.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Reported-tested-by: Roger Quadros <rogerq@ti.com> Reported-tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2015-03-02ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL enabled on UART3Lokesh Vutla1-1/+1
commit 1c7e36bfc3e2fb2df5e2d1989a4b6fb9055a0f9b upstream. With commit '7dedd34: ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL' we moved from parsing cmdline to identify uart used for earlycon to using the requsite hwmod CONFIG_DEBUG_OMAPxUARTy FLAGS. On DRA7 UART3 hwmod doesn't have this flag enabled, and atleast on BeagleBoard-X15, where we use UART3 for console, boot fails with DEBUG_LL enabled. Enable DEBUG_OMAP4UART3_FLAGS for UART3 hwmod. For using DEBUG_LL, enable CONFIG_DEBUG_OMAP4UART3 in menuconfig. Fixes: 90020c7b2c5e ("ARM: OMAP: DRA7: hwmod: Create initial DRA7XX SoC data") Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2015-01-29ARM: omap5/dra7xx: Fix frequency typosLennart Sorensen1-4/+4
commit 572b24e6d85d98cdc552f07e9fb9870d9460d81b upstream. The switch statement of the possible list of SYSCLK1 frequencies is missing a 0 in 4 out of the 7 frequencies. Fixes: fa6d79d27614 ("ARM: OMAP: Add initialisation for the real-time counter") Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2015-01-26ARM: OMAP4: PM: Only do static dependency configuration in ↵Nishanth Menon1-20/+9
omap4_init_static_deps commit 9008d83fe9dc2e0f19b8ba17a423b3759d8e0fd7 upstream. Commit 705814b5ea6f ("ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5") Moved logic generic for OMAP5+ as part of the init routine by introducing omap4_pm_init. However, the patch left the powerdomain initial setup, an unused omap4430 es1.0 check and a spurious log "Power Management for TI OMAP4." in the original code. Remove the duplicate code which is already present in omap4_pm_init from omap4_init_static_deps. As part of this change, also move the u-boot version print out of the static dependency function to the omap4_pm_init function. Fixes: 705814b5ea6f ("ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5") Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-10-13ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variantsRajendra Nayak1-0/+6
commit af438fec6cb99fc2e2faf8b16b865af26ce722e6 upstream. Use the corresponding compatibles to identify the devices. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-09-03ARM: OMAP3: Fix choice of omap3_restore_es function in OMAP34XX rev3.1.2 case.Jeremy Vial1-1/+2
commit 9b5f7428f8b16bd8980213f2b70baf1dd0b9e36c upstream. According to the comment “restore_es3: applies to 34xx >= ES3.0" in "arch/arm/mach-omap2/sleep34xx.S”, omap3_restore_es3 should be used if the revision of an OMAP34xx is ES3.1.2. Signed-off-by: Jeremy Vial <jvial@adeneo-embedded.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-18ARM: OMAP2+: Fix parser-bug in platform muxing codeDavid R. Piegdon1-2/+4
commit c021f241f4fab2bb4fc4120a38a828a03dd3f970 upstream. Fix a parser-bug in the omap2 muxing code where muxtable-entries will be wrongly selected if the requested muxname is a *prefix* of their m0-entry and they have a matching mN-entry. Fix by additionally checking that the length of the m0_entry is equal. For example muxing of "dss_data2.dss_data2" on omap32xx will fail because the prefix "dss_data2" will match the mux-entries "dss_data2" as well as "dss_data20", with the suffix "dss_data2" matching m0 (for dss_data2) and m4 (for dss_data20). Thus both are recognized as signal path candidates: Relevant muxentries from mux34xx.c: _OMAP3_MUXENTRY(DSS_DATA20, 90, "dss_data20", NULL, "mcspi3_somi", "dss_data2", "gpio_90", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(DSS_DATA2, 72, "dss_data2", NULL, NULL, NULL, "gpio_72", NULL, NULL, "safe_mode"), This will result in a failure to mux the pin at all: _omap_mux_get_by_name: Multiple signal paths (2) for dss_data2.dss_data2 Patch should apply to linus' latest master down to rather old linux-2.6 trees. Signed-off-by: David R. Piegdon <lkml@p23q.org> Cc: stable@vger.kernel.org [tony@atomide.com: updated description to include full description] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-20ARM: OMAP3: clock: Back-propagate rate change from cam_mclk to dpll4_m5 on ↵Laurent Pinchart1-1/+2
all OMAP3 platforms commit 98d7e1aee6dd534f468993f8c6a1bc730d4cfa81 upstream. Commit 7b2e1277598e4187c9be3e61fd9b0f0423f97986 ("ARM: OMAP3: clock: Back-propagate rate change from cam_mclk to dpll4_m5") enabled clock rate back-propagation from cam_mclk do dpll4_m5 on OMAP3630 only. Perform back-propagation on other OMAP3 platforms as well. Reported-by: Jean-Philippe François <jp.francois@cynove.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-20ARM: omap5: hwmod_data: Correct IDLEMODE for McPDMPeter Ujfalusi1-1/+1
commit 0f9e19ad88eee820f517b85531b555a0fa73e7e4 upstream. McPDM need to be configured to NO_IDLE mode when it is in used otherwise vital clocks will be gated which results 'slow motion' audio playback. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15ARM: OMAP3: hwmod data: Correct clock domains for USB modulesRoger Quadros1-2/+2
commit c6c56697ae4bf1226263c19e8353343d7083f40e upstream. OMAP3 doesn't contain "l3_init_clkdm" clock domain. Use the proper clock domains for USB Host and USB TLL modules. Gets rid of the following warnings during boot omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm Reported-by: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Fixes: de231388cb80a8ef3e779bbfa0564ba0157b7377 ("ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3") Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: Partha Basak <parthab@india.ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15ARM: OMAP4: Fix definition of IS_PM44XX_ERRATUMNishanth Menon1-1/+1
commit 07484ca33ef83900f5cfbde075c1a19e5a237aa1 upstream. Just like IS_PM34XX_ERRATUM, IS_PM44XX_ERRATUM is valid only if CONFIG_PM is enabled, else, disabling CONFIG_PM results in build failure complaining about the following: arch/arm/mach-omap2/built-in.o: In function `omap4_boot_secondary': :(.text+0x8a70): undefined reference to `pm44xx_errata' Fixes: c962184 (ARM: OMAP4: PM: add errata support) Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.ocm> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-15ARM: OMAP2+: INTC: Acknowledge stuck active interruptsStefan Sørensen1-0/+8
commit 698b48532539484b012fb7c4176b959d32a17d00 upstream. When an interrupt has become active on the INTC it will stay active until it is acked, even if masked or de-asserted. The INTC_PENDING_IRQn registers are however updated and since these are used by omap_intc_handle_irq to determine which interrupt to handle, it will never see the active interrupt. This will result in a storm of useless interrupts that is only stopped when another higher priority interrupt is asserted. Fix by sending the INTC an acknowledge if we find no interrupts to handle. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND ↵Pekon Gupta1-1/+1
is built as module commit 980386d2d6d49e0b42f48550853ef1ad6aa5d79a upstream. Fixes: commit 75d3625e0e86b2d8d77b4e9c6f685fd7ea0d5a96 ARM: OMAP2+: gpmc: add DT bindings for OneNAND OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and register them platform_device for ONENAND driver to probe later. However this does not happen if generic MTD_ONENAND framework is built as module (CONFIG_MTD_ONENAND=m). Therefore, when MTD/ONENAND and MTD/ONENAND/OMAP2 modules are loaded, they are unable to find any matching platform_device and remain un-binded. This causes on board ONENAND flash to remain un-detected. This patch causes GPMC controller to parse DT nodes when CONFIG_MTD_ONENAND=y || CONFIG_MTD_ONENAND=m Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is ↵Pekon Gupta1-1/+1
built as module commit 6b187b21c92b6e2c7e8ef0b450181c37a3f31681 upstream. Fixes: commit bc6b1e7b86f5d8e4a6fc1c0189e64bba4077efe0 ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and register them platform_device for NAND driver to probe later. However this does not happen if generic MTD_NAND framework is built as module (CONFIG_MTD_NAND=m). Therefore, when MTD/NAND and MTD/NAND/OMAP2 modules are loaded, they are unable to find any matching platform_device and remain un-binded. This causes on board NAND flash to remain un-detected. This patch causes GPMC controller to parse DT nodes when CONFIG_MTD_NAND=y || CONFIG_MTD_NAND=m Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-01-25ARM: 7938/1: OMAP4/highbank: Flush L2 cache before disablingTaras Kondratiuk1-0/+1
commit b25f3e1c358434bf850220e04f28eebfc45eb634 upstream. Kexec disables outer cache before jumping to reboot code, but it doesn't flush it explicitly. Flush is done implicitly inside of l2x0_disable(). But some SoC's override default .disable handler and don't flush cache. This may lead to a corrupted memory during Kexec reboot on these platforms. This patch adds cache flush inside of OMAP4 and Highbank outer_cache.disable() handlers to make it consistent with default l2x0_disable(). Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-10ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy bootingTony Lindgren1-1/+6
commit 7e367c18c059c638bf6fb540f1decec18d64cb55 upstream. Looks like the LCD panel on LDP has been broken quite a while, and recently got fixed by commit 0b2aa8bed3e1 (gpio: twl4030: Fix regression for twl gpio output). However, there's still an issue left where the panel backlight does not come on if the LCD drivers are built into the kernel. Fix the issue by registering the DPI LCD panel only after the twl4030 GPIO has probed. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [tony@atomide.com: updated per Tomi's comments] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-10ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq dataSuman Anna2-5/+5
commit 6d4c88304794442055eaea1c07f3c7b988b8c924 upstream. Commit 7d7e1eb (ARM: OMAP2+: Prepare for irqs.h removal) and commit ec2c082 (ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQ) updated the way interrupts for OMAP2/3 devices are defined in the HWMOD data structures to being an index plus a fixed offset (defined by OMAP_INTC_START). Couple of irqs in the OMAP2/3 hwmod data were misconfigured completely as they were missing this OMAP_INTC_START relative offset. Add this offset back to fix the incorrect irq data for the following modules: OMAP2 - GPMC, RNG OMAP3 - GPMC, ISP MMU & IVA MMU Signed-off-by: Suman Anna <s-anna@ti.com> Fixes: 7d7e1eba7e92 ("ARM: OMAP2+: Prepare for irqs.h removal") Fixes: ec2c0825ca31 ("ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQ") Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-10ARM: DRA7: hwmod: Fix boot crash with DEBUG_LLRajendra Nayak1-1/+1
commit 38958c15dc640a9249e4f0cd0dfb0ddc7a23464d upstream. With commit '7dedd34: ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL' we moved from parsing cmdline to identify uart used for earlycon to using the requsite hwmod CONFIG_DEBUG_OMAPxUARTy FLAGS. On DRA7 though, we seem to be missing this flag, and atleast on the DRA7 EVM where we use uart1 for console, boot fails with DEBUG_LL enabled. Reported-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> # on a different base Signed-off-by: Rajendra Nayak <rnayak@ti.com> Fixes: 7dedd346941d ("ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL") Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20ARM: OMAP2+: hwmod: Fix SOFTRESET logicRoger Quadros1-1/+42
commit 313a76ee11cda6700548afe68499ef174a240688 upstream. In _ocp_softreset(), after _set_softreset() + write_sysconfig(), the hwmod's sysc_cache will always contain SOFTRESET bit set so all further writes to sysconfig using this cache will initiate a repeated SOFTRESET e.g. enable_sysc(). This is true for OMAP3 like platforms that have RESET_DONE status in the SYSSTATUS register and so the the SOFTRESET bit in SYSCONFIG is not automatically cleared. It is not a problem for OMAP4 like platforms that indicate RESET completion by clearing the SOFTRESET bit in the SYSCONFIG register. This repeated SOFTRESET is undesired and was the root cause of USB host issues on OMAP3 platforms when hwmod was allowed to do the SOFTRESET for the USB Host module. To fix this we clear the SOFTRESET bit and update the sysconfig register + sysc_cache using write_sysconfig(). Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> # Panda, BeagleXM [paul@pwsan.com: renamed _clr_softreset() to _clear_softreset()] Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20ARM: OMAP3: hwmod data: Don't prevent RESET of USB Host moduleRoger Quadros1-10/+3
commit 7f4d3641e2548d1ac5dee837ff434df668a2810c upstream. Unlike what the comment states, errata i660 does not state that we can't RESET the USB host module. Instead it states that RESET is the only way to recover from a deadlock situation. RESET ensures that the module is in a known good state irrespective of what bootloader does with the module, so it must be done at boot. Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> # Panda, BeagleXM Fixes: de231388cb80 ("ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3") Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resumeNishanth Menon1-2/+11
commit 3522bf7bfa248b99eafa2f4872190699a808c7d9 upstream. OMAP device hooks around suspend|resume_noirq ensures that hwmod devices are forced to idle using omap_device_idle/enable as part of the last stage of suspend activity. For a device such as i2c who uses autosuspend, it is possible to enter the suspend path with dev->power.runtime_status = RPM_ACTIVE. As part of the suspend flow, the generic runtime logic would increment it's dev->power.disable_depth to 1. This should prevent further pm_runtime_get_sync from succeeding once the runtime_status has been set to RPM_SUSPENDED. Now, as part of the suspend_noirq handler in omap_device, we force the following: if the device status is !suspended, we force the device to idle using omap_device_idle (clocks are cut etc..). This ensures that from a hardware perspective, the device is "suspended". However, runtime_status is left to be active. *if* an operation is attempted after this point to pm_runtime_get_sync, runtime framework depends on runtime_status to indicate accurately the device status, and since it sees it to be ACTIVE, it assumes the module is functional and returns a non-error value. As a result the user will see pm_runtime_get succeed, however a register access will crash due to the lack of clocks. To prevent this from happening, we should ensure that runtime_status exactly indicates the device status. As a result of this change any further calls to pm_runtime_get* would return -EACCES (since disable_depth is 1). On resume, we restore the clocks and runtime status exactly as we suspended with. These operations are not expected to fail as we update the states after the core runtime framework has suspended itself and restore before the core runtime framework has resumed. Reported-by: J Keerthy <j-keerthy@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04ARM: OMAP2+: irq, AM33XX add missing register checkMarkus Pargmann1-1/+1
commit 0bebda684857f76548ea48c8886785198701d8d3 upstream. am33xx has a INTC_PENDING_IRQ3 register that is not checked for pending interrupts. This patch adds AM33XX to the ifdef of SOCs that have to check this register. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-29ARM: OMAP2+: hwmod: check for module address space during initSuman Anna1-10/+19
commit 6423d6df1440a8acfc2f375d7cbc4cd66c2e6910 upstream. The hwmod init sequence involves initializing and idling all the hwmods during bootup. If a module class has sysconfig, the init sequence utilizes the module register base for performing any sysc configuration. The module address space is being removed from hwmod database and retrieved from the <reg> property of the corresponding DT node. If a hwmod does not have its corresponding DT node defined and the memory address space is not defined in the corresponding omap_hwmod_ocp_if, then the module register target address space would be NULL and any sysc programming would result in a NULL pointer dereference and a kernel boot hang. Handle this scenario by checking for a valid module address space during the _init of each hwmod, and leaving it in the registered state if no module register address base is defined in either of the hwmod data or the DT data. Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> [paul@pwsan.com: use -ENXIO rather than -ENOMEM to indicate a missing address space error; fixed checkpatch.pl problem] Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-08ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_configPali Rohár1-0/+9
File drivers/leds/leds-lp55xx-common.c refuse to change led_current sysfs attribute if value is higher than max_current specified in board file. By default global C variables are zero, so changing always failed. This patch adding missing max_current and setting it to max safe value 100 (10 mA). It is unclear which commit exactly caused this regression as the lp5523 driver was broken and was hiding the platform data breakage. Now the driver is fixed so this should be fixed as well. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Joerg Reisenweber <joerg@openmoko.org> [tony@atomide.com: updated comments to describe regression] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-08ARM: mach-omap2: board-generic: fix undefined symbolSimon Barth1-2/+2
Since dra7 reuses the function 'omap5_realtime_timer_init' in arch/arm/mach-omap2/board-generic.c as timer init function, it has to be built for this SoC as well. Signed-off-by: Simon Barth <Simon.Pe.Barth@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-08ARM: dts: Fix pinctrl mask for omap3Tony Lindgren1-3/+1
The wake-up interrupt bit is available on omap3/4/5 processors unlike what we claim. Without fixing it we cannot use it on omap3 and the system configured for wake-up events will just hang on wake-up. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-08ARM: OMAP3: Fix hardware detection for omap3630 when booted with device treeNishanth Menon1-0/+18
SoC family definitions at the moment are reactive to board needs as a result, beagle-xm would matchup with ti,omap3 which invokes omap3430_init_early instead of omap3630_init_early. Obviously, this is the wrong behavior. With clock node dts conversion, we get the following warnings before system hangs as a result and 3630 based platforms fails to boot (uart4 clocks are only present in OMAP3630 and not present in OMAP3430): ... omap_hwmod: uart4: cannot clk_get main_clk uart4_fck omap_hwmod: uart4: cannot _init_clocks WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2434 _init+0x6c/0x80() omap_hwmod: uart4: couldn't init clocks ... WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280() omap_hwmod: timer12: enabled state can only be entered from initialized, idle, or disabled state ... WARNING: CPU: 0 PID: 46 at arch/arm/mach-omap2/omap_hwmod.c:2224 _idle+0xd4/0xf8() omap_hwmod: timer12: idle state can only be entered from enabled state WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280() omap_hwmod: uart4: enabled state can only be entered from initialized, idle, or disabled state So, add specific compatiblity for 3630 to allow match for Beagle-XM platform. Signed-off-by: Nishanth Menon <nm@ti.com> [tony@atomide.com: left out ti,omap343x, updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03ARM: OMAP2: gpmc-onenand: fix sync mode setup with DTAaro Koskinen1-1/+11
With DT-based boot, the GPMC OneNAND sync mode setup does not work correctly. During the async mode setup, sync flags gets incorrectly set in the onenand_async data and the system crashes during the async setup. Also, the sync mode never gets set in gpmc_onenand_data->flags, so even without the crash, the actual sync mode setup would never be called. The patch fixes this by adjusting the gpmc_onenand_data->flags when the data is read from the DT. Also while doing this we force the onenand_async to be always async. The patch enables to use the following DTS chunk (that should correspond the arch/arm/mach-omap2/board-rm680.c board file setup) with Nokia N950, which currently crashes with 3.12-rc1. The crash output can be also found below. &gpmc { ranges = <0 0 0x04000000 0x20000000>; onenand@0,0 { #address-cells = <1>; #size-cells = <1>; reg = <0 0 0x20000000>; gpmc,sync-read; gpmc,sync-write; gpmc,burst-length = <16>; gpmc,burst-read; gpmc,burst-wrap; gpmc,burst-write; gpmc,device-width = <2>; gpmc,mux-add-data = <2>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <87>; gpmc,cs-wr-off-ns = <87>; gpmc,adv-on-ns = <0>; gpmc,adv-rd-off-ns = <10>; gpmc,adv-wr-off-ns = <10>; gpmc,oe-on-ns = <15>; gpmc,oe-off-ns = <87>; gpmc,we-on-ns = <0>; gpmc,we-off-ns = <87>; gpmc,rd-cycle-ns = <112>; gpmc,wr-cycle-ns = <112>; gpmc,access-ns = <81>; gpmc,page-burst-access-ns = <15>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,wait-monitoring-ns = <0>; gpmc,clk-activation-ns = <5>; gpmc,wr-data-mux-bus-ns = <30>; gpmc,wr-access-ns = <81>; gpmc,sync-clk-ps = <15000>; }; }; [ 1.467559] GPMC CS0: cs_on : 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.474822] GPMC CS0: cs_rd_off : 1 ticks, 5 ns (was 24 ticks) 5 ns [ 1.482116] GPMC CS0: cs_wr_off : 14 ticks, 71 ns (was 24 ticks) 71 ns [ 1.489349] GPMC CS0: adv_on : 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.496582] GPMC CS0: adv_rd_off: 3 ticks, 15 ns (was 3 ticks) 15 ns [ 1.503845] GPMC CS0: adv_wr_off: 3 ticks, 15 ns (was 3 ticks) 15 ns [ 1.511077] GPMC CS0: oe_on : 3 ticks, 15 ns (was 4 ticks) 15 ns [ 1.518310] GPMC CS0: oe_off : 1 ticks, 5 ns (was 24 ticks) 5 ns [ 1.525543] GPMC CS0: we_on : 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.532806] GPMC CS0: we_off : 8 ticks, 40 ns (was 24 ticks) 40 ns [ 1.540039] GPMC CS0: rd_cycle : 4 ticks, 20 ns (was 29 ticks) 20 ns [ 1.547302] GPMC CS0: wr_cycle : 4 ticks, 20 ns (was 29 ticks) 20 ns [ 1.554504] GPMC CS0: access : 0 ticks, 0 ns (was 23 ticks) 0 ns [ 1.561767] GPMC CS0: page_burst_access: 0 ticks, 0 ns (was 3 ticks) 0 ns [ 1.569641] GPMC CS0: bus_turnaround: 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.577270] GPMC CS0: cycle2cycle_delay: 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.585144] GPMC CS0: wait_monitoring: 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.592834] GPMC CS0: clk_activation: 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.600463] GPMC CS0: wr_data_mux_bus: 5 ticks, 25 ns (was 8 ticks) 25 ns [ 1.608154] GPMC CS0: wr_access : 0 ticks, 0 ns (was 23 ticks) 0 ns [ 1.615386] GPMC CS0 CLK period is 5 ns (div 1) [ 1.625122] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf009e442 [ 1.633178] Internal error: : 1008 [#1] ARM [ 1.637573] Modules linked in: [ 1.640777] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-rc1-n9xx-los.git-5318619-00006-g4baa700-dirty #26 [ 1.651123] task: ef04c000 ti: ef050000 task.ti: ef050000 [ 1.656799] PC is at gpmc_onenand_setup+0x98/0x1e0 [ 1.661865] LR is at gpmc_cs_set_timings+0x494/0x5a4 [ 1.667083] pc : [<c002e040>] lr : [<c001f384>] psr: 60000113 [ 1.667083] sp : ef051d10 ip : ef051ce0 fp : ef051d94 [ 1.679138] r10: c0caaf60 r9 : ef050000 r8 : ef18b32c [ 1.684631] r7 : f0080000 r6 : c0caaf60 r5 : 00000000 r4 : f009e400 [ 1.691497] r3 : f009e442 r2 : 80050000 r1 : 00000014 r0 : 00000000 [ 1.698333] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.706024] Control: 10c5387d Table: af290019 DAC: 00000015 [ 1.712066] Process swapper (pid: 1, stack limit = 0xef050240) [ 1.718200] Stack: (0xef051d10 to 0xef052000) [ 1.722778] 1d00: 00004000 00001402 00000000 00000005 [ 1.731384] 1d20: 00000047 00000000 0000000f 0000000f 00000000 00000028 0000000f 00000005 [ 1.739990] 1d40: 00000000 00000000 00000014 00000014 00000000 00000000 00000000 00000000 [ 1.748596] 1d60: 00000000 00000019 00000000 00000000 ef18b000 ef099c50 c0c8cb30 00000000 [ 1.757171] 1d80: c0488074 c048f868 ef051dcc ef051d98 c024447c c002dfb4 00000000 c048f868 [ 1.765777] 1da0: 00000000 00000000 c010e4a4 c0dbbb7c c0c8cb40 00000000 c0ca2500 c0488074 [ 1.774383] 1dc0: ef051ddc ef051dd0 c01fd508 c0244370 ef051dfc ef051de0 c01fc204 c01fd4f4 [ 1.782989] 1de0: c0c8cb40 c0ca2500 c0c8cb74 00000000 ef051e1c ef051e00 c01fc3b0 c01fc104 [ 1.791595] 1e00: ef0983bc 00000000 c0ca2500 c01fc31c ef051e44 ef051e20 c01fa794 c01fc328 [ 1.800201] 1e20: ef03634c ef0983b0 ef27d534 c0ca2500 ef27d500 c0c9a2f8 ef051e54 ef051e48 [ 1.808807] 1e40: c01fbcfc c01fa744 ef051e84 ef051e58 c01fb838 c01fbce4 c0411df8 c0caa040 [ 1.817413] 1e60: ef051e84 c0ca2500 00000006 c0caa040 00000066 c0488074 ef051e9c ef051e88 [ 1.825988] 1e80: c01fca30 c01fb768 c04975b8 00000006 ef051eac ef051ea0 c01fd728 c01fc9bc [ 1.834594] 1ea0: ef051ebc ef051eb0 c048808c c01fd6e4 ef051f4c ef051ec0 c0008888 c0488080 [ 1.843200] 1ec0: 0000006f c046bae8 00000000 00000000 ef051efc ef051ee0 ef051f04 ef051ee8 [ 1.851806] 1ee0: c046d400 c0181218 c046d410 c18da8d5 c036a8e4 00000066 ef051f4c ef051f08 [ 1.860412] 1f00: c004b9a8 c046d41c c048f840 00000006 00000006 c046b488 00000000 c043ec08 [ 1.869018] 1f20: ef051f4c c04975b8 00000006 c0caa040 00000066 c046d410 c048f85c c048f868 [ 1.877593] 1f40: ef051f94 ef051f50 c046db8c c00087a0 00000006 00000006 c046d410 ffffffff [ 1.886199] 1f60: ffffffff ffffffff ffffffff 00000000 c0348fd0 00000000 00000000 00000000 [ 1.894805] 1f80: 00000000 00000000 ef051fac ef051f98 c0348fe0 c046daa8 00000000 00000000 [ 1.903411] 1fa0: 00000000 ef051fb0 c000e7f8 c0348fdc 00000000 00000000 00000000 00000000 [ 1.912017] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.920623] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff [ 1.929199] Backtrace: [ 1.931793] [<c002dfa8>] (gpmc_onenand_setup+0x0/0x1e0) from [<c024447c>] (omap2_onenand_probe+0x118/0x49c) [ 1.942047] [<c0244364>] (omap2_onenand_probe+0x0/0x49c) from [<c01fd508>] (platform_drv_probe+0x20/0x24) [ 1.952117] r8:c0488074 r7:c0ca2500 r6:00000000 r5:c0c8cb40 r4:c0dbbb7c [ 1.959197] [<c01fd4e8>] (platform_drv_probe+0x0/0x24) from [<c01fc204>] (driver_probe_device+0x10c/0x224) [ 1.969360] [<c01fc0f8>] (driver_probe_device+0x0/0x224) from [<c01fc3b0>] (__driver_attach+0x94/0x98) [ 1.979125] r7:00000000 r6:c0c8cb74 r5:c0ca2500 r4:c0c8cb40 [ 1.985107] [<c01fc31c>] (__driver_attach+0x0/0x98) from [<c01fa794>] (bus_for_each_dev+0x5c/0x90) [ 1.994506] r6:c01fc31c r5:c0ca2500 r4:00000000 r3:ef0983bc [ 2.000488] [<c01fa738>] (bus_for_each_dev+0x0/0x90) from [<c01fbcfc>] (driver_attach+0x24/0x28) [ 2.009735] r6:c0c9a2f8 r5:ef27d500 r4:c0ca2500 [ 2.014587] [<c01fbcd8>] (driver_attach+0x0/0x28) from [<c01fb838>] (bus_add_driver+0xdc/0x260) [ 2.023742] [<c01fb75c>] (bus_add_driver+0x0/0x260) from [<c01fca30>] (driver_register+0x80/0xfc) [ 2.033081] r8:c0488074 r7:00000066 r6:c0caa040 r5:00000006 r4:c0ca2500 [ 2.040161] [<c01fc9b0>] (driver_register+0x0/0xfc) from [<c01fd728>] (__platform_driver_register+0x50/0x64) [ 2.050476] r5:00000006 r4:c04975b8 [ 2.054260] [<c01fd6d8>] (__platform_driver_register+0x0/0x64) from [<c048808c>] (omap2_onenand_driver_init+0x18/0x20) [ 2.065490] [<c0488074>] (omap2_onenand_driver_init+0x0/0x20) from [<c0008888>] (do_one_initcall+0xf4/0x150) [ 2.075836] [<c0008794>] (do_one_initcall+0x0/0x150) from [<c046db8c>] (kernel_init_freeable+0xf0/0x1b4) [ 2.085815] [<c046da9c>] (kernel_init_freeable+0x0/0x1b4) from [<c0348fe0>] (kernel_init+0x10/0xec) [ 2.095336] [<c0348fd0>] (kernel_init+0x0/0xec) from [<c000e7f8>] (ret_from_fork+0x14/0x3c) [ 2.104125] r4:00000000 r3:00000000 [ 2.107879] Code: ebffc3ae e2505000 ba00002e e2843042 (e1d320b0) [ 2.114318] ---[ end trace b8ee3e3e5e002451 ]--- Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-18ARM: OMAP2+: mux: fix trivial typo in namePhil Carmody1-1/+1
Fix trivial typo in name. Signed-off-by: Phil Carmody <phil.carmody@partner.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-18ARM: OMAP4 SMP: Corrected a typo fucntions to functionsAnoop Thomas Mathew1-1/+1
Corrected the functions spelling mistake in the OMAP4 SMP source file. Signed-off-by: Anoop Thomas Mathew <atm@profoundis.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-18ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionallyVladimir Murzin1-1/+1
We call cpu_cluster_pm_enter for dev->cpu == 0 only, but cpu_cluster_pm_exit called without that check. Because of that unhandled page fault may happen: [ 3.803405] Unable to handle kernel paging request at virtual address 00002500 [ 3.810974] pgd = c0004000 [ 3.813812] [00002500] *pgd=00000000 [ 3.817596] Internal error: Oops: 5 [#1] SMP ARM [ 3.822418] Modules linked in: [ 3.825653] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-rc6+ #21 [ 3.832397] task: ed86ef40 ti: ed896000 task.ti: ed896000 [ 3.838073] PC is at irq_notifier+0x234/0x25c [ 3.842651] LR is at irq_notifier+0x218/0x25c [ 3.847229] pc : [<c0029ed8>] lr : [<c0029ebc>] psr: 80000193 [ 3.847229] sp : ed897ee8 ip : 00000005 fp : 00000001 [ 3.859283] r10: c0b395f0 r9 : c0b30594 r8 : c0b8c2ac [ 3.864776] r7 : ffffffff r6 : 00000000 r5 : 00000005 r4 : 00000000 [ 3.871643] r3 : 00002500 r2 : 00000000 r1 : 00000005 r0 : 44302244 [ 3.878479] Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 3.886260] Control: 10c5387d Table: 8000404a DAC: 00000015 [ 3.892272] Process swapper/1 (pid: 0, stack limit = 0xed896240) [ 3.898590] Stack: (0xed897ee8 to 0xed898000) [ 3.903167] 7ee0: c0979c3a 00000001 ed897ef8 ed896000 c0014f7c 00000000 [ 3.911743] 7f00: 00000005 00000000 ffffffff c0b8c2ac c0b395f0 c077c04c c0c94b48 c0b3953c [ 3.920318] 7f20: c0bcd928 00000002 c0b39524 c00cfad8 00000000 ffffffff 00000000 c00cfb10 [ 3.928924] 7f40: c14e62c0 c002c1c8 c002c0ac c14e62c0 00000002 e251c37d 00000000 c0b39548 [ 3.937499] 7f60: c0b395f0 c05a1bc4 e251c37d 00000000 00000005 c05a3870 edc90380 edc90380 [ 3.946105] 7f80: edc90394 c14e62c0 c0b39548 00000002 c0784064 c05a3c78 c0b395e0 c14e62c0 [ 3.954681] 7fa0: 00000002 c0b39548 c0bc9db8 00000000 00000001 c05a1dc0 ed896000 00000015 [ 3.963287] 7fc0: c0bc9db8 ed896000 8000406a c0b30594 c0784064 c000e504 00000746 c007a528 [ 3.971862] 7fe0: 00000001 0000001d 600001d3 c0bcc004 00000000 800086c4 ee0aa6a7 d2aabaa9 [ 3.980499] [<c0029ed8>] (irq_notifier+0x234/0x25c) from [<c077c04c>] (notifier_call_chain+0x38/0x68) [ 3.990173] [<c077c04c>] (notifier_call_chain+0x38/0x68) from [<c00cfad8>] (cpu_pm_notify+0x20/0x38) [ 3.999786] [<c00cfad8>] (cpu_pm_notify+0x20/0x38) from [<c00cfb10>] (cpu_cluster_pm_exit+0x20/0x50) [ 4.009399] [<c00cfb10>] (cpu_cluster_pm_exit+0x20/0x50) from [<c002c1c8>] (omap_enter_idle_coupled+0x11c/0x14c) [ 4.020111] [<c002c1c8>] (omap_enter_idle_coupled+0x11c/0x14c) from [<c05a1bc4>] (cpuidle_enter_state+0x40/0xec) [ 4.030822] [<c05a1bc4>] (cpuidle_enter_state+0x40/0xec) from [<c05a3c78>] (cpuidle_enter_state_coupled+0x1f4/0x240) [ 4.041870] [<c05a3c78>] (cpuidle_enter_state_coupled+0x1f4/0x240) from [<c05a1dc0>] (cpuidle_idle_call+0x150/0x228) [ 4.052947] [<c05a1dc0>] (cpuidle_idle_call+0x150/0x228) from [<c000e504>] (arch_cpu_idle+0x8/0x38) [ 4.062499] [<c000e504>] (arch_cpu_idle+0x8/0x38) from [<c007a528>] (cpu_startup_entry+0x178/0x1e4) [ 4.071990] [<c007a528>] (cpu_startup_entry+0x178/0x1e4) from [<800086c4>] (0x800086c4) [ 4.080383] Code: e5922288 03a03b0a 13a03c25 e0823003 (e5932000) [ 4.086791] ---[ end trace d83954a84a6fa69e ]--- It is supposed that sar_base is initialized in irq_save_context, which is called on CPU_CLUSTER_PM_ENTER notification. If this notification has been missed and CPU_CLUSTER_PM_EXIT is received sar_base is NULL. Fix it by calling CPU_CLUSTER_PM_{ENTER,EXIT} under the same condition. Signed-off-by: Vladimir Murzin <murzin.v@gmail.com> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-18ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=yFabio Estevam1-2/+2
When CONFIG_ARM_LPAE=y the following build warning is generated: arch/arm/mach-omap2/gpmc.c:1495:4: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat] According to Documentation/printk-formats.txt '%pa' can be used to properly print 'resource_size_t'. Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-18ARM: OMAP: fix return value check in omap_device_build_from_dt()Wei Yongjun1-1/+1
In case of error, the function omap_device_alloc() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-18ARM: OMAP4: Fix clock_get error for GPMC during bootTony Lindgren1-1/+1
Looks like we still have the legacy clock alias name for omap4 GPMC (General Purpose Memory Controller), so let's fix it for the device tree naming. There's no need to keep the legacy naming as omap4 is DT only nowadays. Without this fix we get the following error while booting: [ 0.440399] omap-gpmc 50000000.gpmc: error: clk_get Reported-by: Olof Johansson <olof@lixom.net> Cc: stable@vger.kernel.org # v3.11 Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-10Merge tag 'late-for-linus' of ↵Linus Torvalds24-36/+5725
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Kevin Hilman: "These are changes that arrived a little late before the merge window, or had dependencies on previous branches. Highlights: - ux500: misc. cleanup, fixup I2C devices - exynos: DT updates for RTC; PM updates - at91: DT updates for NAND; new platforms added to generic defconfig - sunxi: DT updates: cubieboard2, pinctrl driver, gated clocks - highbank: LPAE fixes, select necessary ARM errata - omap: PM fixes and improvements; OMAP5 mailbox support - omap: basic support for new DRA7xx SoCs" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: dts: vexpress: Add CCI node to TC2 device-tree ARM: EXYNOS: Skip C1 cpuidle state for exynos5440 ARM: EXYNOS: always enable PM domains support for EXYNOS4X12 ARM: highbank: clean-up some unused includes ARM: sun7i: Enable the A20 clocks in the DTSI ARM: sun6i: Enable clock support in the DTSI ARM: sun5i: dt: Use the A10s gates in the DTSI ARM: at91: at91_dt_defconfig: enable rm9200 support ARM: dts: add ADC device tree node for exynos5420/5250 ARM: dts: Add RTC DT node to Exynos5420 SoC ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC ARM: dts: Fix the RTC DT node name for Exynos5250 irqchip: mmp: avoid to include irqs head file ARM: mmp: avoid to include head file in mach-mmp irqchip: mmp: support irqchip irqchip: move mmp irq driver ARM: OMAP: AM33xx: clock: Add RNG clock data ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX ARM: OMAP4: clock: Lock PLLs in the right sequence ARM: OMAP: AM33XX: hwmod: Add hwmod data for debugSS ...
2013-09-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-1/+1
Pull crypto update from Herbert Xu: "Here is the crypto update for 3.12: - Added MODULE_SOFTDEP to allow pre-loading of modules. - Reinstated crct10dif driver using the module softdep feature. - Allow via rng driver to be auto-loaded. - Split large input data when necessary in nx. - Handle zero length messages correctly for GCM/XCBC in nx. - Handle SHA-2 chunks bigger than block size properly in nx. - Handle unaligned lengths in omap-aes. - Added SHA384/SHA512 to omap-sham. - Added OMAP5/AM43XX SHAM support. - Added OMAP4 TRNG support. - Misc fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (66 commits) Reinstate "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework" hwrng: via - Add MODULE_DEVICE_TABLE crypto: fcrypt - Fix bitoperation for compilation with clang crypto: nx - fix SHA-2 for chunks bigger than block size crypto: nx - fix GCM for zero length messages crypto: nx - fix XCBC for zero length messages crypto: nx - fix limits to sg lists for AES-CCM crypto: nx - fix limits to sg lists for AES-XCBC crypto: nx - fix limits to sg lists for AES-GCM crypto: nx - fix limits to sg lists for AES-CTR crypto: nx - fix limits to sg lists for AES-CBC crypto: nx - fix limits to sg lists for AES-ECB crypto: nx - add offset to nx_build_sg_lists() padata - Register hotcpu notifier after initialization padata - share code between CPU_ONLINE and CPU_DOWN_FAILED, same to CPU_DOWN_PREPARE and CPU_UP_CANCELED hwrng: omap - reorder OMAP TRNG driver code crypto: omap-sham - correct dma burst size crypto: omap-sham - Enable Polling mode if DMA fails crypto: tegra-aes - bitwise vs logical and crypto: sahara - checking the wrong variable ...
2013-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxHerbert Xu21-115/+145
Merge upstream tree in order to reinstate crct10dif.
2013-09-07Merge tag 'soc-for-linus' of ↵Linus Torvalds10-8/+79
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits) tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ...
2013-09-07Merge tag 'cleanup-for-linus' of ↵Linus Torvalds15-10859/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This branch contains code cleanups, moves and removals for 3.12. There's a large number of various cleanups, and a nice net removal of 13500 lines of code. Highlights worth mentioning are: - A series of patches from Stephen Boyd removing the ARM local timer API. - Move of Qualcomm MSM IOMMU code to drivers/iommu. - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM driver and switching over to the drivers/pwm one. - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM). There's also a move of a header file out of include/linux/i2c/ to platform_data, where it really belongs. It touches mostly ARM platform code for include changes so we took it through our tree" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK gpio: (gpio-pca953x) move header to linux/platform_data/ arm: zynq: hotplug: Remove unreachable code ARM: SAMSUNG: Remove unnecessary exynos4_default_sdhci*() tegra: simplify use of devm_ioremap_resource ARM: SAMSUNG: Remove plat/regs-timer.h header ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header ARM: SAMSUNG: Remove pwm-clock infrastructure ARM: SAMSUNG: Remove old PWM timer platform devices pwm: Remove superseded pwm-samsung-legacy driver ARM: SAMSUNG: Modify board files to use new PWM platform device ARM: SAMSUNG: Rework private data handling in dev-backlight pwm: Add new pwm-samsung driver ARM: mach-mvebu: remove redundant DT parsing and validation ARM: msm: Only compile io.c on platforms that use it iommu/msm: Move mach includes to iommu directory ARM: msm: Remove devices-iommu.c ARM: msm: Move mach/board.h contents to common.h ARM: msm: Migrate msm_timer to CLOCKSOURCE_OF_DECLARE ARM: msm: Remove TMR and TMR0 static mappings ...
2013-09-07Merge tag 'fixes-nc-for-linus' of ↵Linus Torvalds6-47/+5
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC low-priority fixes from Olof Johansson: "This branch contains a handful of fixes for various platforms that weren't serious enough to be included in late 3.11-rc releases. Most of them are for minor cleanups and cosmetic fixes. There's also a bit of code removal here, one board file removal for clps711x, and removal of some legacy device creation on OMAP2+" * tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits) ARM: OMAP2: use 'int' instead of 'unsigned' for variable 'gpmc_irq_start' ARM: OMAP2: remove useless variable 'ret' ARM: OMAP: dma: fix error return code in omap_system_dma_probe() ARM: OMAP2+: fix wrong address when loading PRM_FRAC_INCREMENTOR_DENUMERATOR_RELOAD ARM: OMAP2+: am33xx-restart: trigger warm reset on omap2+ boards ARM: OMAP2: Use a consistent AM33XX SoC option description ARM: OMAP2+: Remove legacy device creation for McPDM and DMIC ARM: clps711x: edb7211: Remove extra iotable_init() call ARM: clps711x: autcpu12: Remove incorrect config checking ARM: clps711x: Drop fortunet board support ARM: clps711x: Remove the special name for the syscon driver ARM: dts: Fix memory node in skeleton64.dtsi ARM: Keystone: Convert device tree file to use IRQ defines ARM: keystone: use #include to include skeleton.dtsi ARM: keystone: Drop the un-necessary dsb from keystone_cpu_smc() ARM: Keystone: No need to preserve r12 across smc call ARM: keystone: remove redundant smp_init_cpus definition ARM: keystone: drop useless HAVE_SCHED_CLOCK ARM: dove: fix missing __init section of dove_mpp_gpio_mode ARM: shmobile: armadillo800eva-reference: fix compiler warning ...
2013-09-05Merge tag 'fbdev-3.12-omap-legacy-removal' of ↵Linus Torvalds19-556/+784
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull OMAP specific fbdev changes from Tomi Valkeinen: "I've got this pull request separate from the main fbdev pull request, as this contains a bunch of OMAP board file changes and thus could possibly be rejected in case of bad conflicts. The removal of the old display drivers depend on the board file changes, so Tony Lindgren suggested taking them together via fbdev tree. These are in linux-next, and also Tony didn't see any conflicts with any of the branches he had, so they should go in clean. - Change the OMAP board files to use the new OMAP display drivers - Remove all the old drivers, and the related auxiliary code" * tag 'fbdev-3.12-omap-legacy-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (35 commits) OMAPDSS: rename omap_dss_device's 'device' field to 'dst' OMAPDSS: rename omap_dss_device's 'output' to 'src' OMAPDSS: DSS: remove legacy dss bus support OMAPDSS: RFBI: remove code related to old panel model OMAPDSS: VENC: remove code related to old panel model OMAPDSS: SDI: remove code related to old panel model OMAPDSS: DSI: remove code related to old panel model OMAPDSS: HDMI: remove code related to old panel model OMAPDSS: DPI: remove code related to old panel model OMAPDSS: remove all old panel drivers OMAPDSS: DPI: change regulator handling OMAPDSS: SDI: change regulator handling OMAPDSS: fix DPI and SDI device ids OMAPDSS: remove omap_dss_device->channel field OMAPDSS: RFBI: Mark RFBI as broken ARM: OMAP2+: Remove old display drivers from omap2plus_defconfig ARM: OMAP: AM3517EVM: use new display drivers ARM: OMAP: Zoom: use new display drivers ARM: OMAP: Pandora: use new display drivers ARM: OMAP: OMAP3EVM: use new display drivers ...
2013-09-05Merge tag 'PTR_RET-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull PTR_RET() removal patches from Rusty Russell: "PTR_RET() is a weird name, and led to some confusing usage. We ended up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages. This has been sitting in linux-next for a whole cycle" [ There are still some PTR_RET users scattered about, with some of them possibly being new, but most of them existing in Rusty's tree too. We have that #define PTR_RET(p) PTR_ERR_OR_ZERO(p) thing in <linux/err.h>, so they continue to work for now - Linus ] * tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). staging/zcache: don't use PTR_RET(). remoteproc: don't use PTR_RET(). pinctrl: don't use PTR_RET(). acpi: Replace weird use of PTR_RET. s390: Replace weird use of PTR_RET. PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. PTR_RET is now PTR_ERR_OR_ZERO
2013-09-03Merge tag 'usb-3.12-rc1' of ↵Linus Torvalds4-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg KH: "Here's the big USB driver pull request for 3.12-rc1 Lots of USB driver fixes and updates. Nothing major, just the normal xhci, gadget, and other driver changes. Full details in the shortlog" * tag 'usb-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (352 commits) usbcore: fix incorrect type in assignment in descriptors_changed() usbcore: compare and release one bos descriptor in usb_reset_and_verify_device() ehci: remove debugging statement with ehci statistics in ehci_stop() ehci: remove duplicate debug_async_open() prototype in ehci-dbg.c ehci: enable debugging code when CONFIG_DYNAMIC_DEBUG is set ehci: remove ehci_vdbg() verbose debugging statements Documentation sysfs-bus-usb: Document which files are used by libusb Documentation sysfs-bus-usb: Document the speed file used by libusb Documentation sysfs-bus-usb: Move files with known users to stable USB: fix build error when CONFIG_PM_SLEEP isn't enabled usb: r8a66597-hcd: use platform_{get,set}_drvdata() usb: phy-tegra-usb: use platform_{get,set}_drvdata() usb: acm gadget: Null termintate strings table dma: cppi41: off by one in desc_to_chan() xhci: Fix warning introduced by disabling runtime PM. dev-core: fix build break when DEBUG is enabled USB: OHCI: Allow runtime PM without system sleep usb: ohci-at91: remove unnecessary dev_set_drvdata() usb: renesas_usbhs: use platform_{get,set}_drvdata() usb: fotg210-udc: use platform_{get,set}_drvdata() ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 14:30:25 +0300