summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/hsmmc.c
AgeCommit message (Collapse)AuthorFilesLines
2011-07-04omap: HSMMC: Fix GPIO muxingSilesh C V1-4/+3
Use generic gpio call to check the validity of the gpio. Note that this includes gpio 0 also which was missing before. Signed-off-by: Silesh C V <silesh@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01ARM: OMAP4: MMC: increase delay for pbiasBalaji T K1-3/+10
4 micro seconds is not enough for PBIAS if MMC regulator is enabled from MMC regulator OFF. Increase the delay for PBIAS to stabilize. Wait for PBIAS and timeout if not. Resolves MMC/SD failure on OMAP4 "Pbias Voltage is not same as LDO" Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01ARM: OMAP4: MMC: no regulator off during probe for eMMCBalaji T K1-0/+3
eMMC does not handle power off when not in sleep state, Skip regulator disable during probe when eMMC is not in known state - state left by bootloader. Resolves eMMC failure on OMAP4 mmc0: error -110 whilst initialising MMC card Signed-off-by: Balaji T K <balajitk@ti.com> Tested-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-02OMAP: hsmmc: Rename the device and driverKishore Kadiyala1-1/+1
Modifying the device & driver name from "mmci-omap-hs" to "omap_hsmmc". Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Acked-by: Benoit Cousson<b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-02OMAP: adapt hsmmc to hwmod frameworkKishore Kadiyala1-149/+197
OMAP2420 platform consists of mmc block as in omap1 and not the hsmmc block as present in omap2430, omap3, omap4 platforms. Removing all base address macro defines except keeping one for OMAP2420 and adapting only hsmmc device registration and driver to hwmod framework. Changes involves: 1) Remove controller reset in devices.c which is taken care of by hwmod framework. 2) Using omap-device layer to register device and utilizing data from hwmod data file for base address, dma channel number, Irq_number, device attribute. 3) Update the driver to use dev_attr to find whether controller supports dual volt cards Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Reviewed-by: Balaji T K <balajitk@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> CC: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-02OMAP: hsmmc: Move mux configuration to hsmmc.cKishore Kadiyala1-0/+84
Moving the definition of mux setting API from devices.c to hsmmc.c and renaming it from "omap2_mmc_mux" to "omap_hsmmc_mux". Also calling "omap_hsmmc_mux" from omap2_hsmmc_init. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Chris Ball <cjb@laptop.org Cc: Tony Lindgren <tony@atomide.com Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-22OMAP: hsmmc: Enable MMC4 and MMC5 on OMAP4 platformsKishore Kadiyala1-0/+5
OMAP4 supports up to 5 MMC controllers, but only 3 of these were initialized. MMC5 is used by wl12xx chip. So initialize MMC4 and MMC5. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Panduranga Mallireddy <panduranga_mallireddy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-08OMAP: control: move plat-omap/control.h to mach-omap2/control.hPaul Walmsley1-1/+1
Only OMAP2+ platforms have the System Control Module (SCM) IP block. In the past, we've kept the SCM header file in plat-omap. This has led to abuse - device drivers including it; includes being added that create implicit dependencies on OMAP2+ builds; etc. In response, move the SCM headers into mach-omap2/. As part of this, remove the direct SCM access from the OMAP UDC driver. It was clearly broken. The UDC code needs an indepth review for use on OMAP2+ chips. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Cory Maccarrone <darkstar6262@gmail.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
2010-10-02omap4 hsmmc: Register offset handlingkishore kadiyala1-0/+4
In OMAP4, as per new PM programming model, the legacy registers which were there in OMAP3 are all shifted by 0x100 while new one's are added from offset 0 to 0x10. For OMAP4, the register offset appending of 0x100 done in devices.c currently, is moved to driver file.This change fits in for current implementation as well as once the driver undergoes hwmod adaptation. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-02OMAP4 ES2: HSMMC soft reset changeMadhusudhan Chikkature1-0/+3
The omap4 es2 hsmmc has a updated soft reset logic.After the reset is issued monitor a 0->1 transition first. The reset of CMD or DATA lines is complete only after a 0->1->0 transition of SRC or SRD bits. Signed-off-by: Madhusudhan Chikkature <madhu.cr@ti.com> Tested-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-28Merge branch 'omap4_and_sdrc_2.6.27' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren1-31/+36
omap-for-linus
2010-09-28omap4: control: Fix the control module register accessesSantosh Shilimkar1-31/+36
This patch has multiple fixes together. To ensure that git bisect work across commits, all changes are clubbed together 1. Move the common control base address to control core 2. Remove the manually coeded defines and use the ones from headers. 3. Fix the the status register define in id.c for OMAP4 4. Fix all the register define in hsmmc.c 5. Use the control pad accessor API for omap4 hsmmc register accesses Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-09-27omap: mmc: extended to pass host capabilities from board fileSukumar Ghorai1-6/+10
wires variable is renamed, extended and this single variable to be used to pass the platform capabilities, e.g DDR mode. Also removed the hardcoded value was using as bus-width. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-11omap: pandora: pass wl1251 information to SDIO coreGrazvydas Ignotas1-0/+1
Pandora has TI WL1251 attached on MMC3, which is non-standard SDIO chip. Make use MMC_QUIRK_NONSTD_SDIO to tell SDIO core about it. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Kalle Valo <kvalo@adurom.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-20omap4: Adding PBIAS Configuration for MMC1 Controllerkishore kadiyala1-9/+88
In OMAP4, MMC1 PBIAS and its associated IO is software-controlled by CONTROL_PBIAS and CONTROL_MMC1 registers. This patch adds PBIAS configuration for MMC1 Controller during power-ON and power-OFF of regulator. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20omap: hsmmc: fix the hsmmc driver for am3517stanley.miao1-6/+21
AM3517 don't have the register OMAP343X_CONTROL_PBIAS_LITE and the regulators like "vmmc", so we set a noop "set_power" function for it. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap_hsmmc: Allow for a shared VccQAdrian Hunter1-0/+3
EMMC can have two voltage supplies, Vcc and VccQ which are implemented in the code as consumer supplies vmmc and vmmc_aux. If the regulator that supplies vmmc_aux is shared with other consumers, then sending it to sleep will disrupt those consumers. However, the TWL4030-family regulators may have OFF remapped to SLEEP, in which case 'regulator_disable()' will put the regulator to sleep only when all consumers are disabled - which is the desired behaviour. This patch adds a platform data field to allow that option. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap_hsmmc: Allow for power saving without going offAdrian Hunter1-0/+3
An eMMC may be always powered on, so that the lowest power saving state possible is sleeping. Add a field to the platform data to indicate that. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: RX51: Remux to pull eMMC lines down when powering offAdrian Hunter1-0/+8
It has been discovered that, when eMMC is powered off, current will flow from OMAP eMMC data pull-ups to the eMMC voltage supply. Configuring pads for OMAP off-mode does not help because eMMC is powered off independently of OMAP off-mode. Hence the pads are now re-configured when eMMC is powered on or off. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: Reconnect hsmmc context loss countAdrian Hunter1-2/+2
Call the PM context-loss count function, now that there is a prototype for it. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: Rename hsmmc symbols to reflect independence from twl4030Adrian Hunter1-12/+12
hsmmc.[ch] no longer has any dependency on twl4030 and variable names should be renamed to reflect that. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: Rename mmc-twl4030 files to hsmmcAdrian Hunter1-0/+252
mmc-twl4030.[ch] no longer has any dependency on twl4030 and should be renamed to reflect that. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-01 08:57:48 +0300