summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/devices.c
AgeCommit message (Collapse)AuthorFilesLines
2011-11-02Merge branch 'next/cleanup' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds1-22/+22
* 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc: (125 commits) ARM: mach-mxs: fix machines' initializers order mmc: mxcmmc: explicitly includes mach/hardware.h arm/imx: explicitly includes mach/hardware.h in pm-imx27.c arm/imx: remove mx27_setup_weimcs() from mx27.h arm/imx: explicitly includes mach/hardware.h in mach-kzm_arm11_01.c arm/imx: remove mx31_setup_weimcs() from mx31.h ARM: tegra: devices.c should include devices.h ARM: tegra: cpu-tegra: unexport two functions ARM: tegra: cpu-tegra: sparse type fix ARM: tegra: dma: staticify some tables and functions ARM: tegra: tegra2_clocks: don't export some tables ARM: tegra: tegra_powergate_is_powered should be static ARM: tegra: tegra_rtc_read_ms should be static ARM: tegra: tegra_init_cache should be static ARM: tegra: pcie: 0 -> NULL changes ARM: tegra: pcie: include board.h ARM: tegra: pcie: don't cast __iomem pointers ARM: tegra: tegra2_clocks: 0 -> NULL changes ARM: tegra: tegra2_clocks: don't cast __iomem pointers ARM: tegra: timer: don't cast __iomem pointers ... Fix up trivial conflicts in arch/arm/mach-omap2/Makefile, arch/arm/mach-u300/{Makefile.boot,core.c} arch/arm/plat-{mxc,omap}/devices.c
2011-11-01Merge branch 'next/fixes' into next/cleanupArnd Bergmann1-2/+1
Conflicts: arch/arm/mach-mxs/include/mach/gpio.h arch/arm/plat-mxc/include/mach/gpio.h drivers/video/omap/lcd_apollon.c drivers/video/omap/lcd_ldp.c drivers/video/omap/lcd_overo.c
2011-10-29Merge branch 'for-linus' of ↵Linus Torvalds1-0/+33
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits) ALSA: hda - Fix ADC input-amp handling for Cx20549 codec ALSA: hda - Keep EAPD turned on for old Conexant chips ALSA: hda/realtek - Fix missing volume controls with ALC260 ASoC: wm8940: Properly set codec->dapm.bias_level ALSA: hda - Fix pin-config for ASUS W90V ALSA: hda - Fix surround/CLFE headphone and speaker pins order ALSA: hda - Fix typo ALSA: Update the sound git tree URL ALSA: HDA: Add new revision for ALC662 ASoC: max98095: Convert codec->hw_write to snd_soc_write ASoC: keep pointer to resource so it can be freed ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2 ASoC: da7210: Add support for line out and DAC ASoC: da7210: Add support for DAPM ALSA: hda/realtek - Fix DAC assignments of multiple speakers ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value ASoC: Set sgtl5000->ldo in ldo_regulator_register ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture ...
2011-09-22OMAP: McPDM: Convert McPDM device to omap_devicePeter Ujfalusi1-0/+33
McPDM device is converted to omap device. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Jorge Eduardo Candelaria Signed-off-by: Margarita Olaya Cabrera Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2011-09-16OMAP: omap_device: when building return platform_device instead of omap_deviceKevin Hilman1-22/+22
All of the device init and device driver interaction with omap_device is done using platform_device pointers. To make this more explicit, have omap_device return a platform_device pointer instead of an omap_device pointer. All current users of the omap_device pointer were only using it to get at the platform_device pointer or struct device pointer, so fixing all of the users was trivial. This also makes it more difficult for device init code to directly access members of struct omap_device, and allows for easier changing of omap_device internals. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-08-08ARM: gpio: convert includes of mach/gpio.h and asm/gpio.h to linux/gpio.hRussell King1-2/+1
Convert arch/arm includes of mach/gpio.h and asm/gpio.h to linux/gpio.h before we start consolidating the individual platform implementations of the gpio header files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-05OMAP4: Keyboard: Mux changes in the board fileShubhrajyoti Datta1-1/+2
The mux settings for keypad are done for omap4430sdp in board file. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> [tony@atomide.com: improved formatting a bit] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01OMAP4: fix return value of omap4_l3_initRabin Vincent1-1/+1
Don't PTR_ERR() a non-error pointer: initcall omap4_l3_init+0x0/0xdc returned -544980480 after 0 usecs initcall omap4_l3_init+0x0/0xdc returned with error code -544980480 Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-31Fix common misspellingsLucas De Marchi1-3/+3
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-28Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: hwspinlock: depend on OMAP4 ARM: OMAP2+: Fix warnings for GPMC interrupt OMAP4: PandaBoard: remove unused power regulators arm: mach-omap2: omap_l3_smx: fix irq handler setup arm: mach-omap2: devices: fix omap3_l3_init() return value
2011-03-24Merge branch 'v4l_for_linus' of ↵Linus Torvalds1-24/+38
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (442 commits) [media] videobuf2-dma-contig: make cookie() return a pointer to dma_addr_t [media] sh_mobile_ceu_camera: Do not call vb2's mem_ops directly [media] V4L: soc-camera: explicitly require V4L2_BUF_TYPE_VIDEO_CAPTURE [media] v4l: soc-camera: Store negotiated buffer settings [media] rc: interim support for 32-bit NEC-ish scancodes [media] mceusb: topseed 0x0011 needs gen3 init for tx to work [media] lirc_zilog: error out if buffer read bytes != chunk size [media] lirc: silence some compile warnings [media] hdpvr: use same polling interval as other OS [media] ir-kbd-i2c: pass device code w/key in hauppauge case [media] rc/keymaps: Remove the obsolete rc-rc5-tv keymap [media] remove the old RC_MAP_HAUPPAUGE_NEW RC map [media] rc/keymaps: Rename Hauppauge table as rc-hauppauge [media] rc-rc5-hauppauge-new: Fix Hauppauge Grey mapping [media] rc-rc5-hauppauge-new: Add support for the old Black RC [media] rc-rc5-hauppauge-new: Add the old control to the table [media] rc-winfast: Fix the keycode tables [media] a800: Fix a few wrong IR key assignments [media] opera1: Use multimedia keys instead of an app-specific mapping [media] dw2102: Use multimedia keys instead of an app-specific mapping ... Fix up trivial conflicts (remove/modify and some real conflicts) in: arch/arm/mach-omap2/devices.c drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/dabusb/dabusb.c drivers/staging/dabusb/dabusb.h drivers/staging/easycap/easycap_ioctl.c drivers/staging/usbvideo/usbvideo.c drivers/staging/usbvideo/vicam.c
2011-03-22[media] omap2: Fix camera resources for multiomapSergio Aguirre1-13/+12
Make sure the kernel can be compiled with both OMAP2 and OMAP3 camera support linked in, and give public symbols proper omap2/omap3 prefixes. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3: Add function to register omap3isp platform device structureLaurent Pinchart1-9/+10
The omap3isp platform device requires platform data. Instead of registering the device in omap2_init_devices(), export an omap3_init_camera() function to fill the device structure with the platform data pointer and register the device. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] omap3: Remove unusued ISP CBUFF resourceSergio Aguirre1-5/+0
The ISP CBUFF module isn't use, its resource isn't needed. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] ARM: OMAP3: Update Camera ISP definitions for OMAP3630Tuukka Toivonen1-4/+24
Add new/changed base address definitions and resources for OMAP3630 ISP. The OMAP3430 CSI2PHY block is same as the OMAP3630 CSIPHY2 block. But the later name is chosen as it gives more symmetry to the names. Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-19arm: mach-omap2: devices: fix omap3_l3_init() return valueAaro Koskinen1-1/+1
Fix the return value for the successful case. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-09OMAP4: Initialise the l3 device with the hwmod data.sricharan1-0/+32
The l3 interconnect device is build with all the data required to handle the error logging. The data is extracted from the hwmod data base. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: sricharan <r.sricharan@ti.com> Acked-by: Benoit Cousson <b-cousson@ti.com>
2011-03-09OMAP3: devices: Initialise the l3 device with the hwmod data.sricharan1-0/+32
The l3 interconnect device is build with all the data required to handle the error logging. The data is extracted from the hwmod database. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Benoit Cousson <b-cousson@ti.com>
2011-03-03Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and ↵Tony Lindgren1-342/+49
'devel-hsmmc' into omap-for-linus Conflicts: arch/arm/mach-omap2/omap_hwmod_44xx_data.c
2011-03-02OMAP: adapt hsmmc to hwmod frameworkKishore Kadiyala1-168/+0
OMAP2420 platform consists of mmc block as in omap1 and not the hsmmc block as present in omap2430, omap3, omap4 platforms. Removing all base address macro defines except keeping one for OMAP2420 and adapting only hsmmc device registration and driver to hwmod framework. Changes involves: 1) Remove controller reset in devices.c which is taken care of by hwmod framework. 2) Using omap-device layer to register device and utilizing data from hwmod data file for base address, dma channel number, Irq_number, device attribute. 3) Update the driver to use dev_attr to find whether controller supports dual volt cards Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Reviewed-by: Balaji T K <balajitk@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> CC: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-02OMAP: hsmmc: Move mux configuration to hsmmc.cKishore Kadiyala1-83/+0
Moving the definition of mux setting API from devices.c to hsmmc.c and renaming it from "omap2_mmc_mux" to "omap_hsmmc_mux". Also calling "omap_hsmmc_mux" from omap2_hsmmc_init. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Chris Ball <cjb@laptop.org Cc: Tony Lindgren <tony@atomide.com Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-02omap: mmc: split out init for 2420Anand Gadiyar1-32/+56
The MMC controller on the OMAP2420 is different from those on the OMAP2430, OMAP3 and OMAP4 families - all of the latter are identical. The one on the OMAP2420 is closer to that on OMAP1 chips. Currently, the n8x0 is the only OMAP2420 platform supported in mainline which registers the MMC controller. Upcoming changes to register the controllers using hwmod data are potentially invasive. To reduce the risk, separate out the 2420 controller registration from the common init function and update its only user. Also seperating out mux settings for OMAP2420. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-24OMAP: mailbox: build device using omap_device/omap_hwmodFelipe Contreras1-82/+16
Remove static platform_device and resource data within omap mailbox driver; use the one defined in the hwmod database along with omap_device framework for device build and registration. Add device latency functions to be used, so clock can be enabled and sysconfig is configured. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-23Merge branches 'devel-cleanup', 'devel-omap4', 'devel-board' and ↵Tony Lindgren1-0/+41
'devel-nand' into omap-for-linus
2011-02-18OMAP4: keypad: Add the board supportSyed Rafiuddin1-0/+41
-Add the platform changes for the keypad driver -Register keyboard device with hwmod framework. Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com> Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17OMAP: devices: Modify McSPI device to adapt to hwmod frameworkCharulatha V1-147/+40
Cleans up all base address definitions for omap_mcspi and adapts the device registration and driver to hwmod framework. Changes involves: 1) Removing all base address macro defines. 2) Using omap-device layer to register device and utilizing data from hwmod data file for base address, dma channel number, Irq_number, device attribute(number of chipselect). 3) Appending base address with pdata reg_offset for omap4 boards. For omap4 all regs used in driver deviate with reg_offset_macros defined with an value of 0x100. So pass this offset through pdata and append the same to base address retrieved from hwmod data file and we are not mapping *_HL_* regs which are not used in driver. Signed-off-by: Charulatha V <charu@ti.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Partha Basak <p-basak2@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-28omap: Start using CONFIG_SOC_OMAPTony Lindgren1-3/+3
We want to have just CONFIG_ARCH_OMAP2, 3 and 4. The rest are nowadays just subcategories of these. Search and replace the following: ARCH_OMAP2420 SOC_OMAP2420 ARCH_OMAP2430 SOC_OMAP2430 ARCH_OMAP3430 SOC_OMAP3430 No functional changes. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Sourav Poddar <sourav.poddar@ti.com>
2011-01-07omap2+: wdt: trivial sparse fixesNishanth Menon1-1/+1
omap2_wd_timer_disable is declared in wdtimer.h and used by hwmod function pointers for usage, the header inclusion is necessary to ensure that the prototype and function remains consistent. omap_wdt_latency is passed as a pointer and does not need global scope Fixes sparse warnings: arch/arm/mach-omap2/devices.c:981:31: warning: symbol 'omap_wdt_latency' was not declared. Should it be static? arch/arm/mach-omap2/wd_timer.c:27:5: warning: symbol 'omap2_wd_timer_disable' was not declared. Should it be static? Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanismPaul Walmsley1-15/+0
The OMAP watchdog timer IP blocks require a specific set of register writes to occur before they will be disabled[1], even if the device clocks appear to be disabled in the CM_*CLKEN registers. In the MPU watchdog case, failure to execute this reset sequence will eventually cause the watchdog to reset the OMAP unexpectedly. Previously, the code to disable this watchdog was manually called from mach-omap2/devices.c during device initialization. This causes the watchdog to be unconditionally disabled for a portion of kernel initialization. This should be controllable by the board-*.c files, since some system integrators will want full watchdog coverage of kernel initialization. Also, the watchdog disable code was not connected to the hwmod shutdown code. This means that calling omap_hwmod_shutdown() will not, in fact, disable the watchdog, and the goal of omap_hwmod_shutdown() is to be able to shutdown any on-chip OMAP device. To resolve the latter problem, populate the pre_shutdown pointer in the watchdog timer hwmod classes with a function that executes the watchdog shutdown sequence. This allows the hwmod code to fully disable the watchdog. Then, to allow some board files to support watchdog coverage throughout kernel initialization, add common code to mach-omap2/io.c to cause the MPU watchdog to be disabled on boot unless a board file specifically requests it to remain enabled. Board files can do this by changing the watchdog timer hwmod's postsetup state between the omap2_init_common_infrastructure() and omap2_init_common_devices() function calls. 1. OMAP34xx Multimedia Device Silicon Revision 3.1.x Rev. ZH [SWPU222H], Section 16.4.3.6, "Start/Stop Sequence for WDTs (Using WDTi.WSPR Register)" Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Charulatha Varadarajan <charu@ti.com>
2010-12-22OMAP2+: wd_timer: separate watchdog disable code from the rest of ↵Paul Walmsley1-50/+5
mach-omap2/devices.c Split the wd_timer disable code out into its own file, mach-omap2/wd_timer.c; it belongs in its own file rather than cluttering up devices.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Charulatha Varadarajan <charu@ti.com>
2010-12-21arm: mach-omap2: hsmmc_reset: fix clk_get() error handlingAaro Koskinen1-20/+24
clk_get() return value should be checked with IS_ERR(). Furthermore, clocks should be put and disabled properly. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-26Merge branch 'omap-for-linus' of ↵Linus Torvalds1-16/+115
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits) omap: complete removal of machine_desc.io_pg_offst and .phys_io omap: UART: fix wakeup registers for OMAP24xx UART2 omap: Fix spotty MMC voltages ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h serial: omap-serial: fix signess error OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish omap: dma: Fix buffering disable bit setting for omap24xx omap: serial: Fix the boot-up crash/reboot without CONFIG_PM OMAP3: PM: fix scratchpad memory accesses for off-mode omap4: pandaboard: enable the ehci port on pandaboard omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set omap4: pandaboard: remove unused hsmmc definition OMAP: McBSP: Remove null omap44xx ops comment OMAP: McBSP: Swap CLKS source definition OMAP: McBSP: Fix CLKR and FSR signal muxing OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks OMAP: control: move plat-omap/control.h to mach-omap2/control.h OMAP: split plat-omap/common.c OMAP: McBSP: implement functional clock switching via clock framework OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c ... Fixed up trivial conflicts in arch/arm/mach-omap2/ {board-zoom-peripherals.c,devices.c} as per Tony
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds1-0/+39
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits) ALSA: hda - Disable sticky PCM stream assignment for AD codecs ALSA: usb - Creative USB X-Fi volume knob support ALSA: ca0106: Use card specific dac id for mute controls. ALSA: ca0106: Allow different sound cards to use different SPI channel mappings. ALSA: ca0106: Create a nice spot for mapping channels to dacs. ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence. ALSA: ca0106: Pull out dac powering routine into separate function. ALSA: ca0106 - add Sound Blaster 5.1vx info. ASoC: tlv320dac33: Use usleep_range for delays ALSA: usb-audio: add Novation Launchpad support ALSA: hda - Add workarounds for CT-IBG controllers ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs ASoC: tpa6130a2: Error handling for broken chip ASoC: max98088: Staticise m98088_eq_band ASoC: soc-core: Fix codec->name memory leak ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066 ALSA: hda - Add some workarounds for Creative IBG ALSA: hda - Fix wrong SPDIF NID assignment for CA0110 ALSA: hda - Fix codec rename rules for ALC662-compatible codecs ALSA: hda - Add alc_init_jacks() call to other codecs ...
2010-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-0/+71
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: Makefile - replace the use of <module>-objs with <module>-y crypto: hifn_795x - use cancel_delayed_work_sync() crypto: talitos - sparse check endian fixes crypto: talitos - fix checkpatch warning crypto: talitos - fix warning: 'alg' may be used uninitialized in this function crypto: cryptd - Adding the AEAD interface type support to cryptd crypto: n2_crypto - Niagara2 driver needs to depend upon CRYPTO_DES crypto: Kconfig - update broken web addresses crypto: omap-sham - Adjust DMA parameters crypto: fips - FIPS requires algorithm self-tests crypto: omap-aes - OMAP2/3 AES hw accelerator driver crypto: updates to enable omap aes padata: add missing __percpu markup in include/linux/padata.h MAINTAINERS: Add maintainer entries for padata/pcrypt
2010-10-08OMAP: control: move plat-omap/control.h to mach-omap2/control.hPaul Walmsley1-2/+1
Only OMAP2+ platforms have the System Control Module (SCM) IP block. In the past, we've kept the SCM header file in plat-omap. This has led to abuse - device drivers including it; includes being added that create implicit dependencies on OMAP2+ builds; etc. In response, move the SCM headers into mach-omap2/. As part of this, remove the direct SCM access from the OMAP UDC driver. It was clearly broken. The UDC code needs an indepth review for use on OMAP2+ chips. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Cory Maccarrone <darkstar6262@gmail.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
2010-10-08OMAP2PLUS: WDT: Fix: Disable WDT after reset during initCharulatha V1-0/+61
Inorder to avoid any assumptions from bootloader, the watchdog timer module is reset during init. This enables the watchdog timer. Therefore, it is required to disable WDT after it is reset during init. Otherwise the system would reboot as per the default watchdog timer registers settings. Later, when the watchdog driver is loaded, the watchdog timer settings is adjusted as per the default timer_margin set in the driver and the driver would supports the normal operations supported by OMAP watchdog timer. Signed-off-by: Charulatha V <charu@ti.com> Reported-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-08Merge branch 'pm-hwmods' of ↵Tony Lindgren1-0/+39
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2010-10-04omap: devices: Avoid merge conflict between ASoC and OMAP hwmod changesJarkko Nikula1-1/+1
Upcoming ASoC multi-component and OMAP hwmod changes will conflict in arch/arm/mach-omap2/devices.c. Avoid this by moving a little bit include statement introduced by ASoC Multi-Component Support patch. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-02omap4 hsmmc: Register offset handlingkishore kadiyala1-5/+3
In OMAP4, as per new PM programming model, the legacy registers which were there in OMAP3 are all shifted by 0x100 while new one's are added from offset 0 to 0x10. For OMAP4, the register offset appending of 0x100 done in devices.c currently, is moved to driver file.This change fits in for current implementation as well as once the driver undergoes hwmod adaptation. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29OMAP: WDT: Split OMAP1 and OMAP2PLUS device registrationVaradarajan, Charulatha1-0/+39
This patch splits omap_init_wdt() into separate omap_init_wdt() functions under mach-omap1 and mach-omap2 and set them up with subsys_initcall. Also it uses omap_device_build() API instead of platform_device_register() for watchdog timer device registration for OMAP2plus chips. For OMAP2plus chips, the device specific data defined in centralized hwmod database will be used. Signed-off-by: Charulatha V <charu@ti.com> Acked-by: Cousson, Benoit <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-27omap: mmc: extended to pass host capabilities from board fileSukumar Ghorai1-7/+9
wires variable is renamed, extended and this single variable to be used to pass the platform capabilities, e.g DDR mode. Also removed the hardcoded value was using as bus-width. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-27omap: crypto: updates to enable omap aesDmitry Kasatkin1-0/+71
Updates to enable omap aes Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> [tony@atomide.com: updated to use CONFIG_ARCH_OMAP2/3 instead of old 24XX/34XX] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-03crypto: updates to enable omap aesDmitry Kasatkin1-0/+71
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-08-16Merge branch 'for-2.6.36' into for-2.6.37Mark Brown1-71/+17
Fairly simple conflicts, the most serious ones are the i.MX ones which I suspect now need another rename. Conflicts: arch/arm/mach-mx2/clock_imx27.c arch/arm/mach-mx2/devices.c arch/arm/mach-omap2/board-rx51-peripherals.c arch/arm/mach-omap2/board-zoom2.c sound/soc/fsl/mpc5200_dma.c sound/soc/fsl/mpc5200_dma.h sound/soc/fsl/mpc8610_hpcd.c sound/soc/pxa/spitz.c
2010-08-12ASoC: multi-component - ASoC Multi-Component SupportLiam Girdwood1-0/+39
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-04Merge branch 'v2.6.35-omap-mailbox-for-next' of ↵Tony Lindgren1-1/+5
git://gitorious.org/~doyu/lk/mainline into omap-for-linus Conflicts: arch/arm/mach-omap1/devices.c
2010-08-04omap: mailbox: standarize on 'omap-mailbox'Felipe Contreras1-1/+1
omap{1,2}-mailbox are modules that provide the 'omap-mailbox' driver. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: add IRQ namesFelipe Contreras1-0/+4
Will be useful to identify them later. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-07-05Removing dead OMAP_STIChristoph Egger1-57/+0
OMAP_STI doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: mux: Convert 2420 platform init code to use new mux codeTony Lindgren1-13/+12
Convert 2420 platform init code to use new mux code Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-09 05:45:22 +0300