summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/board-generic.c
AgeCommit message (Collapse)AuthorFilesLines
2017-09-11Merge tag 'armsoc-platforms' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch contains platform updates for 32- and 64-bit ARM, including defconfig updates to enable new options, drivers and platforms. There are also a few fixes and cleanups for some existing vendors. Some of the things worth highlighting here are: - Enabling new crypt drivers on arm64 defconfig - QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig - Debug support enabled for Renesas r8a7743 - Various config updates for Renesas platforms (sound, USB, other drivers) - Platform support (including SMP) for TI dra762 - OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code" * tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: multi_v7_defconfig: make eSDHC driver built-in arm64: defconfig: enable rockchip graphics MAINTAINERS: Update Cavium ThunderX2 entry ARM: config: aspeed: Add I2C, VUART, LPC Snoop ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G ARM: s3c24xx: Fix NAND ECC mode for mini2440 board ARM: davinci_all_defconfig: enable tinydrm and ST7586 arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl ARM: defconfig: tegra: Enable ChipIdea UDC driver ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig ARM: tegra: Add Tegra I2S interfaces to defconfig ARM: tegra: Update default configuration for v4.13-rc1 MAINTAINERS: update ARM/ZTE entry soc: versatile: remove unnecessary static in realview_soc_probe() ARM: Convert to using %pOF instead of full_name ARM: hisi: Fix typo in comment ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add recently added crypto drivers as modules arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG ...
2017-08-16Merge tag 'omap-for-v4.14/soc-signed' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Pull "soc changes for omaps for v4.14" from Tony Lindgren: SoC updates for omaps for v4.14. Most of the chages are to add support for new dra762 SoC. The other changes are are for legacy DMA code removal, and MMC quirk and iodelay config for dra7. * tag 'omap-for-v4.14/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: dra7: powerdomain data: Register SoC specific powerdomains ARM: dra762: Enable SMP for dra762 ARM: dra7: hwmod: Register dra76x specific hwmod ARM: dra762: Add support for device identification ARM: OMAP2+: board-generic: add support for dra762 family ARM: OMAP2+: Select PINCTRL_TI_IODELAY for SOC_DRA7XX ARM: OMAP2+: Add pdata-quirks for MMC/SD on DRA74x EVM ARM: OMAP2+: Remove unused legacy code for DMA
2017-08-15ARM: OMAP2+: Register SoC device attributes from machine .init()Laurent Pinchart1-0/+1
SoC device attributes are registered with a call to soc_device_register() from the machine .init_late() operation, which is called from the late initcall, after all drivers built-in drivers have been probed. This results in the impossibility for drivers to use SoC device matching in their probe function. The omap_soc_device_init() function is safe to call from the machine .init() operation, as all data it depends on is initialized from the .init_early() operation. Move SoC device attribute registration to machine .init() like on all other ARM platforms. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-14ARM: OMAP2+: board-generic: add support for dra762 familyLokesh Vutla1-0/+1
Adding board generic support for dra762 family. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-27ARM: omap2: mark unused functions as __maybe_unusedArnd Bergmann1-1/+1
The omap_generic_init() and omap_hwmod_init_postsetup() functions are used in the initialization for all OMAP2+ SoC types, but in the extreme case that those are all disabled, we get a warning about unused code: arch/arm/mach-omap2/io.c:412:123: error: 'omap_hwmod_init_postsetup' defined but not used [-Werror=unused-function] arch/arm/mach-omap2/board-generic.c:30:123: error: 'omap_generic_init' defined but not used [-Werror=unused-function] This annotates both as __maybe_unused to shut up that warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2016-12-27ARM: omap2+: am437x: rollback to use omap3_gptimer_timer_init()Grygorii Strashko1-1/+1
The commit 55ee7017ee31 ("arm: omap2: board-generic: use omap4_local_timer_init for AM437x") unintentionally changes the clocksource devices for AM437x from OMAP GP Timer to SyncTimer32K. Unfortunately, the SyncTimer32K is starving from frequency deviation as mentioned in commit 5b5c01359152 ("ARM: OMAP2+: AM43x: Use gptimer as clocksource") and, as reported by Franklin [1], even its monotonic nature is under question (most probably there is a HW issue, but it's still under investigation). Taking into account above facts It's reasonable to rollback to the use of omap3_gptimer_timer_init(). [1] http://www.spinics.net/lists/linux-omap/msg127425.html Fixes: 55ee7017ee31 ("arm: omap2: board-generic: use omap4_local_timer_init for AM437x") Reported-by: Cooper Jr., Franklin <fcooper@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-16Merge tag 'armsoc-soc' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "These are updates for platform specific code on 32-bit ARM machines, essentially anything that can not (yet) be expressed using DT files. Noteworthy changes include: - Added support for the TI DRA71x family of SoCs in mach-omap2, this is an new variant of the the DRA72x/DRA74x automotive infotainment chips we already supported for a while. - Added support for the ST STM32F746 SoC, the first Cortex-M7 based microcontroller we support, related to the smaller STM32F4 family. - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see http://elinux.org/RZ-G - SMP is now supported on the OX820 platform - A lot of code in mach-omap2 gets removed as a follow-up to removing support for board files in the previous release - Davinci has some new work to improve USB support - For i.MX, the performance monitor now supports profiling the memory controller using 'perf'" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits) ARM: davinci: da830-evm: use gpio descriptor for mmc pins ARM: davinci: da850-evm: use gpio descriptor for mmc pins ARM: davinci: hawk: use gpio descriptor for mmc pins ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6 ARM: davinci: da8xx: Fix ohci device name ARM: oxnas: Add OX820 config and makefile entry ARM: oxnas: Add OX820 SMP support ARM: davinci: PM: fix build when da850 not compiled in ARM: orion5x: remove legacy support of ls-chl ARM: integrator: drop EBI access use syscon ARM: BCM5301X: Add back handler ignoring external imprecise aborts ARM: davinci: PM: support da8xx DT platforms ARM: davinci: PM: cleanup: remove references to pdata ARM: davinci: PM: rework init, remove platform device ARM: Kconfig: Introduce MACH_STM32F746 flag ARM: mach-stm32: Add a new SOC - STM32F746 ARM: shmobile: document SK-RZG1E board ARM: shmobile: r8a7745: basic SoC support ARM: imx: mach-imx6ul: add imx6ull support ARM: zynq: Reserve correct amount of non-DMA RAM ...
2016-11-10ARM: OMAP2+: board-generic: add support for DRA71x familyLokesh Vutla1-0/+1
DRA71x processor family is a derivative of DRA722 ES2.0 targetted for infotainment systems. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-10ARM: OMAP2+: Remove the omapdss_early_init_of() functionLaurent Pinchart1-2/+0
The function is empty, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-11ARM: OMAP2+: Set system_rev from ATAGS for n900Ivaylo Dimitrov1-1/+21
This fixed a regression with DT boot compared to legacy boot. Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> [tony@atomide.com: edited patch subject to follow standard] Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-04ARM: 8496/1: OMAP: RX51: save ATAGS data in the early boot stageIvaylo Dimitrov1-1/+11
This fixes a regression with device tree based booting compared to legacy booting for n900 to make the n900 legacy user space to also work with device tree based booting Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-11-11Merge tag 'armsoc-cleanup' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "Again we have a sizable (but not huge) cleanup branch with a net delta of about -3k lines. Main contents here is: - A bunch of development/cleanup of a few PXA boards - Removal of bockw platforms on shmobile, since the platform has now gone completely multiplatform. Whee! - move of the 32kHz timer on OMAP to a proper timesource - Misc cleanup of older OMAP material (incl removal of one board file) - Switch over to new common PWM lookup support for several platforms There's also a handful of other cleanups across the tree, but the above are the major pieces" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (103 commits) ARM: OMAP3: hwmod data: Remove legacy mailbox data and addrs ARM: DRA7: hwmod data: Remove spinlock hwmod addrs ARM: OMAP4: hwmod data: Remove spinlock hwmod addrs ARM: DRA7/AM335x/AM437x: hwmod: Remove gpmc address space from hwmod data ARM: Remove __ref on hotplug cpu die path ARM: Remove open-coded version of IRQCHIP_DECLARE arm: omap2: board-generic: use omap4_local_timer_init for AM437x ARM: DRA7/AM335x/AM437x: hwmod: Remove elm address space from hwmod data ARM: OMAP: Remove duplicated operand in OR operation clocksource: ti-32k: make it depend on GENERIC_CLOCKSOURCE ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode ARM: pxa: raumfeld: make some variables static ARM: OMAP: Change all cpu_is_* occurences to soc_is_* for id.c ARM: OMAP2+: Rename cpu_is macros to soc_is arm: omap2: timer: limit hwmod usage to non-DT boots arm: omap2+: select 32k clocksource driver clocksource: add TI 32.768 Hz counter driver arm: omap2: timer: rename omap_sync32k_timer_init() arm: omap2: timer: always call clocksource_of_init() when DT arm: omap2: timer: move realtime_counter_init() around ...
2015-10-22arm: omap2: board-generic: use omap4_local_timer_init for AM437xFelipe Balbi1-1/+1
AM437x-based boards, can use omap4_local_timer_init() just fine. Let's use that instead. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-10-19ARM: OMAP2+: Fix imprecise external abort caused by bogus SRAM initTony Lindgren1-0/+1
Some omaps are producing imprecise external aborts because we are wrongly trying to init SRAM for device tree based booting. Only omap3 is still using the legacy SRAM code, so we need to make it omap3 specific. Otherwise we can get errors like this on at least dm814x: Unhandled fault: imprecise external abort (0xc06) at 0xc08b156c ... (omap_rev) from [<c08b12e0>] (omap_sram_init+0xf8/0x3e0) (omap_sram_init) from [<c08aca0c>] (omap_sdrc_init+0x10/0xb0) (omap_sdrc_init) from [<c08b581c>] (pdata_quirks_init+0x18/0x44) (pdata_quirks_init) from [<c08b5478>] (omap_generic_init+0x10/0x1c) (omap_generic_init) from [<c08a57e0>] (customize_machine+0x1c/0x40) (customize_machine) from [<c00098a4>] (do_one_initcall+0x80/0x1dc) (do_one_initcall) from [<c08a2ec4>] (kernel_init_freeable+0x218/0x2e8) (kernel_init_freeable) from [<c063a554>] (kernel_init+0x8/0xec) (kernel_init) from [<c000f890>] (ret_from_fork+0x14/0x24) Let's fix the issue by making sure omap_sdrc_init only gets called for omap3. To do that, we need to have compatible "ti,omap3" in the dts files. And let's also use "ti,omap3630" instead of "ti,omap36xx" like we're supposed to. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-10-16ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memoryTony Lindgren1-0/+9
On boards with more than 2GB of RAM booting goes wrong with things not working and we're getting lots of l3 warnings: WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x260/0x384() 44000000.ocp:L3 Custom Error: MASTER MMC6 TARGET DMM1 (Idle): Data Access in User mode during Functional access ... [<c044e158>] (scsi_add_host_with_dma) from [<c04705c8>] (ata_scsi_add_hosts+0x5c/0x18c) [<c04705c8>] (ata_scsi_add_hosts) from [<c046b13c>] (ata_host_register+0x150/0x2cc) [<c046b13c>] (ata_host_register) from [<c046b38c>] (ata_host_activate+0xd4/0x124) [<c046b38c>] (ata_host_activate) from [<c047f42c>] (ahci_host_activate+0x5c/0x194) [<c047f42c>] (ahci_host_activate) from [<c0480854>] (ahci_platform_init_host+0x1f0/0x3f0) [<c0480854>] (ahci_platform_init_host) from [<c047c9dc>] (ahci_probe+0x70/0x98) [<c047c9dc>] (ahci_probe) from [<c04220cc>] (platform_drv_probe+0x54/0xb4) Let's fix the issue by enabling ZONE_DMA for LPAE. Note that we need to limit dma_zone_size to 2GB as the rest of the RAM is beyond the 4GB limit. Let's also fix things for dra7 as done in similar patches in the TI tree by Lokesh Vutla <lokeshvutla@ti.com>. Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-10-16arm: omap2: timer: rename omap_sync32k_timer_init()Felipe Balbi1-5/+5
this function is not only about the 32k sync timer, it's OMAP's generic init_time implementation. Let's rename it to make that detail easier to notice. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-16arm: omap2: timer: provide generic sync32k_timer_init functionFelipe Balbi1-5/+5
instead of constantly defining a small wrapper around __omap_sync32k_timer_init(), let's define a generic one which can be used by all OMAPs. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14ARM: OMAP2+: board-generic: Remove stale of_irq macrosNishanth Menon1-7/+0
When commit c4082d499fa2 ("ARM: omap2+: board-generic: clean up the irq data from board file") cleaned up the direct usage of gic_of_init and omap_intc_of_init, it failed to clean up the macros properly. Since these macros are no longer used, lets just remove them. Fixes: c4082d499fa2 ("ARM: omap2+: board-generic: clean up the irq data from board file") Reported-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-24Merge branch 'dm814x-soc' into omap-for-v4.3/socTony Lindgren1-1/+1
Update dm814x changes for sparse fixes to make data structures static. Conflicts: arch/arm/mach-omap2/omap_hwmod_81xx_data.c
2015-07-16ARM: OMAP2+: Fix dm814x DT_MACHINE_STARTTony Lindgren1-1/+1
Fix dm814x DT_MACHINE_START. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-16ARM: DRA7: Provide proper IO map tableNishanth Menon1-2/+2
DRA7 uses OMAP5 IO table at the moment. This is purely spurious since the OMAP5 and DRA7 register maps are different in many aspects. AM57xx/DRA7 TRM Reference: http://www.ti.com/lit/ug/spruhz6/spruhz6.pdf NOTE: Most of the drivers are already doing ioremap, so, there should'nt be any functional improvement involved here, other than making the initial iotable more accurate. Fixes: a3a9384a1157 ("ARM: DRA7: Reuse io tables and add a new .init_early") Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-17Merge tag 'soc-for-linus' of ↵Linus Torvalds1-0/+36
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New and updated SoC support. Also included are some cleanups where the platform maintainers hadn't separated cleanups from new developent in separate branches. Some of the larger things worth pointing out: - A large set of changes from Alexandre Belloni and Nicolas Ferre preparing at91 platforms for multiplatform and cleaning up quite a bit in the process. - Removal of CSR's "Marco" SoC platform that never made it out to the market. We love seeing these since it means the vendor published support before product was out, which is exactly what we want! New platforms this release are: - Conexant Digicolor (CX92755 SoC) - Hisilicon HiP01 SoC - CSR/sirf Atlas7 SoC - ST STiH418 SoC - Common code changes for Nvidia Tegra132 (64-bit SoC) We're seeing more and more platforms having a harder time labelling changes as cleanups vs new development -- which is a good sign that we've come quite far on the cleanup effort. So over time we might start combining the cleanup and new-development branches more" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (124 commits) ARM: at91/trivial: unify functions and machine names ARM: at91: remove at91_dt_initialize and machine init_early() ARM: at91: change board files into SoC files ARM: at91: remove at91_boot_soc ARM: at91: move alternative initial mapping to board-dt-sama5.c ARM: at91: merge all SOC_AT91SAM9xxx ARM: at91: at91rm9200: set idle and restart from rm9200_dt_device_init() ARM: digicolor: select syscon and timer ARM: zynq: Simplify SLCR initialization ARM: zynq: PM: Fixed simple typo. ARM: zynq: Setup default gpio number for Xilinx Zynq ARM: digicolor: add low level debug support ARM: initial support for Conexant Digicolor CX92755 SoC ARM: OMAP2+: Add dm816x hwmod support ARM: OMAP2+: Add clock domain support for dm816x ARM: OMAP2+: Add board-generic.c entry for ti81xx ARM: at91: pm: remove warning to remove SOC_AT91SAM9263 usage ARM: at91: remove unused mach/system_rev.h ARM: at91: stop using HAVE_AT91_DBGUx ARM: at91: fix ordering of SRAM and PM initialization ...
2015-02-12Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds1-0/+6
Pull ARM updates from Russell King: - clang assembly fixes from Ard - optimisations and cleanups for Aurora L2 cache support - efficient L2 cache support for secure monitor API on Exynos SoCs - debug menu cleanup from Daniel Thompson to allow better behaviour for multiplatform kernels - StrongARM SA11x0 conversion to irq domains, and pxa_timer - kprobes updates for older ARM CPUs - move probes support out of arch/arm/kernel to arch/arm/probes - add inline asm support for the rbit (reverse bits) instruction - provide an ARM mode secondary CPU entry point (for Qualcomm CPUs) - remove the unused ARMv3 user access code - add driver_override support to AMBA Primecell bus * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (55 commits) ARM: 8256/1: driver coamba: add device binding path 'driver_override' ARM: 8301/1: qcom: Use secondary_startup_arm() ARM: 8302/1: Add a secondary_startup that assumes ARM mode ARM: 8300/1: teach __asmeq that r11 == fp and r12 == ip ARM: kprobes: Fix compilation error caused by superfluous '*' ARM: 8297/1: cache-l2x0: optimize aurora range operations ARM: 8296/1: cache-l2x0: clean up aurora cache handling ARM: 8284/1: sa1100: clear RCSR_SMR on resume ARM: 8283/1: sa1100: collie: clear PWER register on machine init ARM: 8282/1: sa1100: use handle_domain_irq ARM: 8281/1: sa1100: move GPIO-related IRQ code to gpio driver ARM: 8280/1: sa1100: switch to irq_domain_add_simple() ARM: 8279/1: sa1100: merge both GPIO irqdomains ARM: 8278/1: sa1100: split irq handling for low GPIOs ARM: 8291/1: replace magic number with PAGE_SHIFT macro in fixup_pv code ARM: 8290/1: decompressor: fix a wrong comment ARM: 8286/1: mm: Fix dma_contiguous_reserve comment ARM: 8248/1: pm: remove outdated comment ARM: 8274/1: Fix DEBUG_LL for multi-platform kernels (without PL01X) ARM: 8273/1: Seperate DEBUG_UART_PHYS from DEBUG_LL on EP93XX ...
2015-01-26ARM: OMAP2+: Add board-generic.c entry for ti81xxTony Lindgren1-0/+36
This allows booting ti81xx boards when a .dts file is in place. Cc: Brian Hutchinson <b.hutchman@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-16ARM: 8257/1: OMAP2+: use common l2cache initialization codeMarek Szyprowski1-0/+6
This patch implements generic DT L2C initialisation (the one from init_IRQ in arch/arm/kernel/irq.c) for Omap4 and AM43 platforms and kills the SoC specific stuff in arch/arm/mach-omap2/omap4-common.c. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-06ARM: OMAP2+: Fix n900 board name for legacy user spaceTony Lindgren1-0/+18
N900 legacy user space apps need the board name in /proc/cpuinfo to work properly for the Hardware entry. For other boards this should not be an issues and they can use the generic Hardware entry. Let's fix the issue by adding a custom DT_MACHINE_START for n900. Tested-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-09Merge tag 'drivers-for-linus' of ↵Linus Torvalds1-14/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. Most of the new code is for the Keystone Navigator driver, which is new base support that is going to be needed for their hardware accelerated network driver and other units. Most of the commits are for moving old code around from at91 and omap for things that are done in device drivers nowadays. - at91: move reset, poweroff, memory and clocksource code into drivers directories - socfpga: add edac driver (through arm-soc, as requested by Boris) - omap: move omap-intc code to drivers/irqchip - sunxi: added an RTC driver for sun6i - omap: mailbox driver related changes - keystone: support for the "Navigator" component - versatile: new reboot, led and soc drivers" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits) bus: arm-ccn: Fix spurious warning message leds: add device tree bindings for register bit LEDs soc: add driver for the ARM RealView power: reset: driver for the Versatile syscon reboot leds: add a driver for syscon-based LEDs drivers/soc: ti: fix build break with modules MAINTAINERS: Add Keystone Multicore Navigator drivers entry soc: ti: add Keystone Navigator DMA support Documentation: dt: soc: add Keystone Navigator DMA bindings soc: ti: add Keystone Navigator QMSS driver Documentation: dt: soc: add Keystone Navigator QMSS bindings rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc rtc: sun6i: Add sun6i RTC driver irqchip: omap-intc: remove unnecessary comments irqchip: omap-intc: correct maximum number or MIR registers irqchip: omap-intc: enable TURBO idle mode irqchip: omap-intc: enable IP protection irqchip: omap-intc: remove unnecesary of_address_to_resource() call irqchip: omap-intc: comment style cleanup irqchip: omap-intc: minor improvement to omap_irq_pending() ...
2014-10-09Merge tag 'dt-for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Arnd Bergmann: "As usual, this is the largest branch, though this time a little under half of the total changes with 307 individual non-merge changesets. The largest changes are the addition of new machines, in particular the Tegra based Chromebook, the Renesas r8a7794 SoC, and DT support for the old i.MX1 platform. Other changes include - at91: various sam9 and sama5 updates - exynos: much extended Peach Pi/Pit (Chromebook 2) support - keystone: new peripherals - meson: added DT for meson6 SoC - mvebu: new device support for Armada 370/375 - qcom: improved support for IPQ8064 and MSM8x60 - rockchip: much improved support for rk3288 - shmobile: lots of updates all over the place - sunxi: dts license change - sunxi: more a23 device support - vexpress: CLCD DT description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (308 commits) ARM: DTS: meson: update DTSI to add watchdog node ARM: dts: keystone-k2l: fix mdio io start address ARM: dts: keystone-k2e: fix mdio io start address ARM: dts: keystone-k2e: update usb1 node for dma properties ARM: dts: keystone: fix io range for usb_phy0 Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt" Revert "ARM: dts: hix5hd2: add wdg node" ARM: dts: add rk3288 i2s controller ARM: vexpress: Add CLCD Device Tree properties ARM: bcm2835: add I2S pinctrl to device tree ARM: meson: documentation: add bindings documentation ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS ARM: dts: mt6589: Change compatible string for GIC ARM: dts: mediatek: Add compatible property for aquaris5 ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk ARM: dts: mt6589: Fix typo in GIC unit address ARM: dts: Build dtb for Mediatek board ARM: dts: keystone: fix bindings for pcie and usb clock nodes ARM: dts: keystone: k2l: Fix chip selects for SPI devices ARM: dts: keystone: add dsp gpio controllers nodes ...
2014-09-12arm: omap: irq: drop .handle_irq and .init_irq fieldsFelipe Balbi1-14/+0
now we can safely drop those fields from our machine_desc. While at that, also drop the now unused omap_intc_of_init() definition. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-11ARM: OMAP2+: make of_device_ids constUwe Kleine-König1-1/+1
of_device_ids (i.e. compatible strings and the respective data) are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const function parameters and structs for OMAP2+ as const, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-11ARM: omap2: make arrays containing machine compatible strings constUwe Kleine-König1-12/+12
The definition static const char *omap3_boards_compat[] __initconst = { defines a changable array of constant strings. That is you must not do: *omap3_boards_compat[0] = 'f'; but omap3_boards_compat[0] = "another string"; is fine. So the annotation __initconst is wrong and yields a compiler error when other really const variables are added with __initconst. As the struct machine_desc member dt_compat is declared as const char *const *dt_compat; making the arrays const is the better alternative over changing all annotations to __initdata. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-09ARM: OMAP2+: board-generic: add support for AM57xx familyNishanth Menon1-0/+4
AM57xx processor family are variants of DRA7 family of processors and targetted at industrial and non-automotive applications. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06ARM: OMAP2+: Add machine entry for dra72x devicesRajendra Nayak1-4/+21
The only difference from the dra74x devices is the missing .smp entry. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06ARM: OMAP2+: Replace all __initdata with __initconst for const initRajendra Nayak1-11/+11
Use of const init definition must use __initconst so replace all such instances where __initdata is used. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-07Merge tag 'fbdev-omap-3.15' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull OMAP fbdev changes from Tomi Valkeinen: "This is based on the already pulled fbdev-main changes, and this also merges .dts branch from Tony Lindgren (which has also been pulled), so that I was able to add the display related .dts changes. This contains OMAP related fbdev changes for 3.15. The bulk of the patches are for adding Device Tree support for OMAP Display Subsystem: - SoCs: OMAP2/3/4 - Boards: OMAP4 Panda, OMAP4 SDP, OMAP3 Beagle, OMAP3 Beagle-xM, OMAP3 IGEP0020, OMAP3 N900 - Devices: TFP410 Encoder, tpd12s015 HDMI companion chip, Sony acx565akm panel, MIPI DSI Command mode panel and HDMI, DVI and Analog TV connectors" * tag 'fbdev-omap-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (45 commits) OMAPDSS: HDMI: fix interlace output OMAPDSS: add missing __init for dss_init_ports ARM: OMAP2+: remove pdata quirks for displays OMAPDSS: remove DT hacks for regulators Doc/DT: Add DT binding documentation for tpd12s015 encoder Doc/DT: Add DT binding documentation for TFP410 encoder Doc/DT: Add DT binding documentation for Sony acx565akm panel Doc/DT: Add DT binding documentation for MIPI DSI CM Panel Doc/DT: Add DT binding documentation for HDMI Connector Doc/DT: Add DT binding documentation for DVI Connector Doc/DT: Add DT binding documentation for Analog TV Connector ARM: omap3-n900.dts: add display information ARM: omap3-igep0020.dts: add display information ARM: omap3-beagle-xm.dts: add display information ARM: omap3-beagle.dts: add display information ARM: omap4-sdp.dts: add display information Doc/DT: Add DT binding documentation for OMAP DSS OMAPDSS: acx565akm: Add DT support OMAPDSS: connector-analog-tv: Add DT support OMAPDSS: hdmi-connector: Add DT support ...
2014-03-19ARM: OMAP2+: DT 'compatible' tweak for displaysTomi Valkeinen1-0/+2
As there is no common panel framework in the kernel, we have OMAP specific panel drivers. However, the DT data should be generic. This brings the issue that some other platform could use the same panels, and would need to create a driver with the same 'compatible' string as the OMAP driver. In the long run, we have to get a common panel framework. For the time being, this patch solves the issue: At early boot time, we go through the DT nodes looking for the panels the kernel supports for OMAP. For each found node, the 'compatible' string is prepended with "omapdss,", i.e. "sony,acx565akm" becomes "omapdss,sony,acx565akm". The OMAP display drivers all have "omapdss," at the beginning of their compatible field. This allows us to have generic DT data, but OMAP specific display drivers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2014-03-19ARM: OMAP2+: add omapdss_init_of()Tomi Valkeinen1-0/+2
The OMAP display architecture requires a bunch of platform devices which are not created via .dts (for now). We also need to pass a few function pointers and the DSS hardware version from the arch code to omapdss driver. This patch adds omapdss_init_of() function, called from board-generic at init time, which handles those tasks. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2014-03-09Merge tag 'omap-for-v3.15/prcm-signed' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Power, reset and clock related changes via Paul Walmsley <paul@pwsan.com>, via Tony Lindgren: Some low-level optimizations and fixes that don't belong in an -rc series for various OMAP-family chips, targeted for v3.15. Basic build, boot, and PM test logs are available here: http://www.pwsan.com/omap/testlogs/prcm-a-for-v3.15/20140228124518/ * tag 'omap-for-v3.15/prcm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP3+: DPLL: stop reparenting to same parent if already done ARM: OMAP2+: clock: fix rate prints ARM: AM43x: hwmod data: register spinlock OCP interface ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP Support ARM: OMAP2+: AM43xx: implement support for machine restart Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-01ARM: OMAP2+: AM43x: Use gptimer as clocksourceRajendra Nayak1-1/+1
The SyncTimer in AM43x is clocked using the following two sources: 1) An inaccuarte 32k clock (CLK_32KHZ) derived from PER DPLL, causing system time to go slowly (~10% deviation). 2) external 32KHz RTC clock, which may not always be available on board like in the case of ePOS EVM Use gptimer as clocksource instead, as is done in the case of AM335x (which does not have a SyncTimer). With this, system time keeping works accurately. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-28ARM: OMAP2+: AM43xx: implement support for machine restartLokesh Vutla1-0/+1
Add restart hook so that AM4372 builds can restart the platform. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-01-08ARM: OMAP2+: board-generic: update SoC compatibility stringsNishanth Menon1-0/+7
Now that we have standardized SoC definitions, update the compatibility strings in board machine descriptors. Eventually, we should just have SoC compatiblity here and all board specific stuff should disappear. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-07ARM: OMAP2+: Fix the machine entry for am3517Nishanth Menon1-0/+18
The am3517 is wrongly booting as omap3 which means that the am3517 specific devices like Ethernet won't work when booted with device tree. Now with the new devices defined in am3517.dtsi, let's use that instead of the omap3.dtsi, and add a separate machine entry for am3517 so am3517-evm can use it. Signed-off-by: Nishanth Menon <nm@ti.com> [tony@atomide.com: updated comments and fixed build without omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-22ARM: OMAP2+: add missing lateinit hook for calling pm late initNishanth Menon1-0/+4
AM335x, AM43xx, OMAP5 and DRA7 have missing late init hook. Introduce SoC specific hook with a call to OMAP2+ generic lateinit hook. This allows the generic late initializations such as cpufreq hooks to be active. Based on out-of-tree patches that need to be introduced in mainline, this introduction allows us to provide the foundation for further SoC specific features as they are developed. Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-14Merge branches 'omap-for-v3.13/dt' and 'omap-for-v3.13/quirk' into ↵Tony Lindgren1-35/+1
omap-for-v3.13/board-removal We need the fixes in v3.12-rc5, dts changes in omap-for-v3.13/dt, and the platform data quirk changes in omap-for-v3.13/quirk to start removing omap3 board files without breaking things.
2013-10-11ARM: OMAP2+: Add support for auxdataTony Lindgren1-4/+1
For few things we're still going to be needing platform data for device tree based drivers. Let's set up auxdata handling and do it in pdata-quirks.c so we have all the legacy calls in one place. Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-08ARM: OMAP3: Fix hardware detection for omap3630 when booted with device treeNishanth Menon1-0/+18
SoC family definitions at the moment are reactive to board needs as a result, beagle-xm would matchup with ti,omap3 which invokes omap3430_init_early instead of omap3630_init_early. Obviously, this is the wrong behavior. With clock node dts conversion, we get the following warnings before system hangs as a result and 3630 based platforms fails to boot (uart4 clocks are only present in OMAP3630 and not present in OMAP3430): ... omap_hwmod: uart4: cannot clk_get main_clk uart4_fck omap_hwmod: uart4: cannot _init_clocks WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2434 _init+0x6c/0x80() omap_hwmod: uart4: couldn't init clocks ... WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280() omap_hwmod: timer12: enabled state can only be entered from initialized, idle, or disabled state ... WARNING: CPU: 0 PID: 46 at arch/arm/mach-omap2/omap_hwmod.c:2224 _idle+0xd4/0xf8() omap_hwmod: timer12: idle state can only be entered from enabled state WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280() omap_hwmod: uart4: enabled state can only be entered from initialized, idle, or disabled state So, add specific compatiblity for 3630 to allow match for Beagle-XM platform. Signed-off-by: Nishanth Menon <nm@ti.com> [tony@atomide.com: left out ti,omap343x, updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-26ARM: OMAP2+: Use pdata quirk support for board-generic.cTony Lindgren1-32/+0
Let's use platform data quirk support for board-generic.c. This removes all board specific hacks out of board-generic.c. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-26ARM: OMAP2+: Add quirk support for legacy platform data initTony Lindgren1-0/+1
We want to drop the board-*.c files but keep things working. Let's make it a bit easier to support legacy platform data init with quirks. This also keeps board-generic.c clean from board specific hacks. For now, the quirks table is empty, that is populated in the later patches. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-08-23ARM: OMAP: DRA7: Reuse the omap44xx_restart and fix the device instanceRajendra Nayak1-0/+1
The omap44xx_restart used on omap4 and omap5 devices can be reused on dra7 devices as well. The device instance however is different across omap5 and dra7 as compared to omap4. So fix this for omap5 as well as dra7. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-08-13ARM: DRA7: board-generic: Add basic DT supportR Sricharan1-0/+18
Describe minimal DT boot machine details for DRA7xx based SoC's. DRA7xx family is based on dual core ARM CORTEX A15 using GIC as the interrupt controller. The PRCM and timer infrastructure is reused from OMAP5 and so are the io descriptor tables. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-22 13:39:28 +0300