summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mx3
AgeCommit message (Collapse)AuthorFilesLines
2010-07-26Merge branch 'imx/for-2.6.36' of git://git.pengutronix.de/git/ukl/linux-2.6 ↵Uwe Kleine-König26-460/+372
into HEAD There are some more conflicts than detected by git, namely support for the newly added cpuimx machines needed to be converted to dynamic device registration. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Conflicts: arch/arm/mach-imx/Makefile arch/arm/mach-imx/devices.c arch/arm/mach-imx/devices.h arch/arm/mach-imx/eukrea_mbimx27-baseboard.c arch/arm/mach-mx2/Kconfig arch/arm/mach-mx25/Makefile arch/arm/mach-mx25/devices.c arch/arm/plat-mxc/include/mach/mx25.h arch/arm/plat-mxc/include/mach/mxc_nand.h
2010-07-26mx31_3ds: Handle USB OTG GPIO ErrorsFabio Estevam1-3/+20
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26i.MX35: add cpuimx35 support and its baseboardEric Bénard4-0/+513
* cpuimx35 integrates i.MX35, RAM, NAND, Ethernet, I2C RTC, USB Host, USB OTG and I2C touchscreen controller * mbimxsd provides access to LCD, Audio, LED, Switch button, UART ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26i.MX35: return IPU clock's value for mx3fbEric Bénard1-1/+1
without this patch, ipu_clk's value is 0 thus preventing mx3fb from calculating the right divisor for pixel clock generator. Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26pcm037/pcm043/pca100: fix ULPI-related build warningsWolfram Sang2-0/+4
Like this one (if CONFIG_USB_ULPI is not set): arch/arm/mach-mx3/mach-pcm043.c:312: warning: 'otg_pdata' defined but not used arch/arm/mach-mx3/mach-pcm043.c:317: warning: 'usbh1_pdata' defined but not used Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26ARM: mx3: mx31lilly: pass mc13783 SPI IRQ pinDaniel Mack1-0/+1
This makes the resistive touch interface work. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-01ARM: mx3: mx31lilly: fix build error for !CONFIG_USB_ULPIDaniel Mack1-11/+22
arch/arm/mach-mx3/built-in.o: In function `mx31lilly_board_init': mach-kzm_arm11_01.c:(.init.text+0x674): undefined reference to `otg_ulpi_create' mach-kzm_arm11_01.c:(.init.text+0x68c): undefined reference to `otg_ulpi_create' mach-kzm_arm11_01.c:(.init.text+0x744): undefined reference to `mxc_ulpi_access_ops' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-06-30ARM: mx3: complement uart init routine with an exit routineUwe Kleine-König1-3/+15
moboard_uart0_init requests a gpio. Without an exit function that frees that gpio again binding the uart a second time doesn't work. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: dynamically register imx-uart devices (imx35)Uwe Kleine-König6-71/+15
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: dynamically register imx-uart devices (imx31)Uwe Kleine-König16-90/+62
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: dynamically register spi_imx devices (imx35)Uwe Kleine-König5-71/+8
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: dynamically register spi_imx devices (imx31)Uwe Kleine-König9-19/+30
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: dynamically register imx-i2c devices (imx35)Uwe Kleine-König5-69/+10
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: dynamically register imx-i2c devices (imx31)Uwe Kleine-König8-12/+27
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: Change the way nand devices are registered (imx35)Uwe Kleine-König5-29/+18
Make use of new mechanism to register a nand device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: Change the way nand devices are registered (imx31)Uwe Kleine-König8-14/+42
Make use of new mechanism to register a nand device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: mx3: remove paragraphs with old address of the FSFUwe Kleine-König16-64/+0
As the kernel contains a copy of the GPL anyhow just get rid of the address specification instead of fixing it. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24ARM: imx: get rid of mxc_gpio_initUwe Kleine-König2-1/+4
This function is defined once for each imx family and so is in the way when compiling a kernel for more than one SoC. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24ARM: mx3/mx31ads: fold board header in its only userUwe Kleine-König1-7/+36
Moreover remove unused definitions. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24ARM: mx3/mx31_3ds: fold board header in its only userUwe Kleine-König1-7/+35
Moreover remove unused definitions. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24ARM: mx3/qong: get rid of nearly empty headerUwe Kleine-König1-2/+1
board-qong.h only defined a single symbol that was used only once. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24ARM: mx3/kzm_arm11_01: fold board header in its only userUwe Kleine-König1-1/+17
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24ARM: imx: remove empty and unused board headersUwe Kleine-König2-2/+0
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-02ARM: mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its arch numberUwe Kleine-König2-1/+7
Additional document all known names of that machine. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-05-26leds: Add mx31moboard MC13783 led supportPhilippe Rétornaz1-1/+44
Add two RGB led on mx31moboard using MC13783 led subsystem Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-26ARM: mx3: pcm037: remove unused variableDaniel Mack1-1/+0
CC arch/arm/mach-mx3/mach-pcm037.o arch/arm/mach-mx3/mach-pcm037.c: In function 'mxc_board_init': arch/arm/mach-mx3/mach-pcm037.c:584: warning: unused variable 'tmp' Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-25Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds12-73/+379
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (103 commits) ARM: 6141/1: Add audio support part in arch/arm/mach-w90x900 ARM: 5939/1: ARM: Add option CMDLINE_FORCE to force usage of the in-kernel cmdline ARM: 6140/1: silence a bogus sparse warning in unwind.c ARM: mach-at91: duplicated include ARM: arch/arm/nwfpe/fpsr.h: Checkpatch cleanup ARM: arch/arm/mach-shark/pci.c: Checkpatch cleanup ARM: arch/arm/nwfpe/ChangeLog: Checkpatch cleanup ARM: arch/arm/mach-sa1100/leds.c: Checkpatch cleanup ARM: arch/arm/mach-h720x/common.h: Checkpatch cleanup ARM: arch/arm/mach-footbridge/ebsa285-pci.c: Checkpatch cleanup ARM: arch/arm/mach-clps711x/Makefile.boot: Checkpatch cleanup ARM: arch/arm/boot/bootp/bootp.lds: Checkpatch cleanup ARM: SPEAR6xx: remove duplicated #include ARM: s3c6400_defconfig: Add NAND driver ARM: s3c6400_defconfig: enable sound as modules ARM: s3c6400_defconfig: enable power management ARM: s5pv210_defconfig: Update s5pv210_defconfig to v2.6.34 ARM: s5pc110_defconfig: Update s5pc110_defconfig to v2.6.34 ARM: s5p6442_defconfig: Update s5p6442_defconfig to v2.6.34 ARM: s5p6440_defconfig: Update s5p6440_defconfig to v2.6.34 ...
2010-05-19mx31_3ds: Support the keypad situated in the personality boardAlberto Panizzo1-0/+32
Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-19MX3X: Add Keypad device definition for MX3X archAlberto Panizzo2-0/+20
This patch adds also the pin definition helpers in iomux-mx3.h Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-18can: sja1000 platform data fixesWolfgang Grandegger1-3/+3
The member "clock" of struct "sja1000_platform_data" is documented as "CAN bus oscillator frequency in Hz" but it's actually used as the CAN clock frequency, which is half of it. To avoid further confusion, this patch fixes it by renaming the member to "osc_freq". That way, also non mainline users will notice the change. The platform code for the relevant boards is updated accordingly. Furthermore, pre-defined values are now used for the members "ocr" and "cdr". Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17arm/mach-mx3: add watchdog device to Phytec-boardsWolfram Sang2-0/+2
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-17arm/mach-mx2/3: Fix watchdog-devices to match the current driverWolfram Sang1-1/+1
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-17MXC: Add USB OTG (device) for i.MX31 PDK (3DS) board.Magnus Lilja1-0/+55
Tested on actual hardware using the g_ether and g_serial gadget drivers. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-17mx31moboard: OTG host support for smartbot boardPhilippe Rétornaz2-3/+39
The Eyebot robot needs the OTG port in host mode on the smartbot. Add a new board definition so we can select the usb host/device mode at boot with the mx31moboard_baseboard boot parameter. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-17mx31moboard: Move usb OTG device registrationPhilippe Rétornaz4-7/+25
In preparation for a new robot which needs the OTG port as host. This moves the OTG device registration into board initialisation. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Acked-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-17mx31moboard: Fix usb PHY resetPhilippe Rétornaz1-61/+37
Setup the pad with correct pull-up/down before doing the reset. Assert the PHY enable signal so the reset is really done. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Acked-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-06mx31smartbot: change the config of a gpioValentin Longchamp1-4/+4
Since it is finally used on the handbot as a configuration input for the translator. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-04-14ARM: mx3/lilly1131: add USB supportDaniel Mack2-0/+146
Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-04-14imx31: add rtc device on litekit board.Vladimir Zapolskiy1-0/+1
This patch adds support for SoC build-in RTC device on litekit board. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-04-14imx3: Add rtc platform device supportVladimir Zapolskiy2-0/+20
This patch adds support for build-in RTC device found on Freescale imx31 and imx35 SoCs. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-04-08Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King8-26/+296
Conflicts: arch/arm/mach-mx3/mach-pcm037.c
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo4-0/+4
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30MXC: mach_armadillo5x0: Add USB Host support.Alberto Panizzo2-0/+167
This add USB Host capability. The Armadillo 500 board is supplied with two USB Host connectors driven by the USB OTG and USB Host 2 ports, through two NXP isp 1504 transceivers. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-30ARM mach-mx3: duplicated includeAndrea Gelmini1-1/+0
arch/arm/mach-mx3/mx31lite-db.c: linux/platform_device.h is included more than once. Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-30ARM mach-mx3: duplicated includeAndrea Gelmini1-1/+0
arch/arm/mach-mx3/mach-pcm037.c: linux/fsl_devices.h is included more than once. Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-30imx31: add watchdog device on litekit board.Vladimir Zapolskiy1-0/+1
This patch adds support for SoC build-in watchdog device on litekit board. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-30imx3: Add watchdog platform device supportVladimir Zapolskiy2-2/+20
This patch adds support for build-in watchdog device found on Freescale imx31 and imx35 SoCs. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-25MXC: mach-mx31_3ds: add support for freescale mc13783 power management device.Alberto Panizzo1-0/+45
Power Gates must to be always enabled. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-25MXC: mach-mx31_3ds: Add SPI1 device support.Alberto Panizzo1-0/+20
Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-25MXC: mach-mx31_3ds: Add support for on board NAND Flash.Alberto Panizzo2-0/+22
Since the using of Bad Block Table is not constantly a good behave I had made it configurable. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-15 09:40:26 +0300