| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit edb924a7211c9aa7a4a415e03caee4d875e46b8e ]
In the inline assembly inside load_unaligned_zeropad(), the "addr" is
constrained as input-only operand. The compiler assumes that on exit
from the asm statement these operands contain the same values as they
had before executing the statement, but when kernel page fault happened, the assembly fixup code "bic %2 %2, #0x3" modify the value of "addr", which may lead to an unexpected behavior.
Use a temporary variable "tmp" to handle it, instead of modifying the
input-only operand, just like what arm64's load_unaligned_zeropad()
does.
Fixes: b9a50f74905a ("ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs")
Co-developed-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Signed-off-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Signed-off-by: Liyuan Pang <pangliyuan1@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 42a20f86dc19f9282d974df0ba4d226c865ab9dd upstream.
Having a stable wchan means the process must be blocked and for it to
stay that way while performing stack unwinding.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm]
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Link: https://lkml.kernel.org/r/20211008111626.332092234@infradead.org
Signed-off-by: Siddhi Katage <siddhi.katage@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b36e78b216e632d90138751e4ff80044de303656 upstream.
The isa_mode() macro extracts two fields, and recombines them into a
single value.
Make this more obvious by using the FIELD_GET() helper, and shifting the
result into its final resting place.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 24d3ba0a7b44c1617c27f5045eecc4f34752ab03 upstream.
The 32-bit ARM kernel stops working if the kernel grows to the point
where veneers for __get_user_* are created.
AAPCS32 [1] states, "Register r12 (IP) may be used by a linker as a
scratch register between a routine and any subroutine it calls. It
can also be used within a routine to hold intermediate values between
subroutine calls."
However, bl instructions buried within the inline asm are unpredictable
for compilers; hence, "ip" must be added to the clobber list.
This becomes critical when veneers for __get_user_* are created because
veneers use the ip register since commit 02e541db0540 ("ARM: 8323/1:
force linker to use PIC veneers").
[1]: https://github.com/ARM-software/abi-aa/blob/2023Q1/aapcs32/aapcs32.rst
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: John Stultz <jstultz@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b0150014878c32197cfa66e3e2f79e57f66babc0 ]
Place IRQ handlers such as gic_handle_irq() in the irqentry section even
if FUNCTION_GRAPH_TRACER is not enabled. Without this, the stack
depot's filter_irq_stacks() does not correctly filter out IRQ stacks in
those configurations, which hampers deduplication and eventually leads
to "Stack depot reached limit capacity" splats with KASAN.
A similar fix was done for arm64 in commit f6794950f0e5ba37e3bbed
("arm64: set __exception_irq_entry with __irq_entry as a default").
Link: https://lore.kernel.org/r/20230803-arm-irqentry-v1-1-8aad8e260b1c@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
(part 1)
[ Upstream commit 0fdebc5ec2ca492d69df2d93a6a7abade4941aae ]
Based on the normalized pattern:
this file is licensed under the terms of the gnu general public
license version 2 this program is licensed as is without any warranty
of any kind whether express or implied
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 6469b2feade8 ("ARM: dts: ti: omap: Fix bandgap thermal cells addressing for omap3/4")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4697b5848bd933f68ebd04836362c8de0cacaf71 ]
Since commit 4e57a4ddf6b0 ("ARM: 9107/1: syscall: always store
thread_info->abi_syscall"), the seccomp selftests "syscall_errno"
and "syscall_faked" have been broken. Both seccomp and PTRACE depend
on using the special value of "-1" for skipping syscalls. This value
wasn't working because it was getting masked by __NR_SYSCALL_MASK in
both PTRACE_SET_SYSCALL and get_syscall_nr().
Explicitly test for -1 in PTRACE_SET_SYSCALL and get_syscall_nr(),
leaving it exposed when present, allowing tracers to skip syscalls
again.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Fixes: 4e57a4ddf6b0 ("ARM: 9107/1: syscall: always store thread_info->abi_syscall")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230810195422.2304827-2-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ee31bb0524a2e7c99b03f50249a411cc1eaa411f upstream
check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.078124882@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dda5f312bb09e56e7a1c3e3851f2000eb2e9c879 ]
The sync_*() ops on arch/arm are defined in terms of the regular bitops
with no special handling. This is not correct, as UP kernels elide
barriers for the fully-ordered operations, and so the required ordering
is lost when such UP kernels are run under a hypervsior on an SMP
system.
Fix this by defining sync ops with the required barriers.
Note: On 32-bit arm, the sync_*() ops are currently only used by Xen,
which requires ARMv7, but the semantics can be implemented for ARMv6+.
Fixes: e54d2f61528165bb ("xen/arm: sync_bitops")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-2-mark.rutland@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 191f8453fc99a537ea78b727acea739782378b0d upstream.
We want to ensure that the mask related to calling do_work_pending()
is within the first 16 bits. Move bits unrelated to that outside of
that range, to avoid spuriously calling do_work_pending() when we don't
need to.
Cc: stable@vger.kernel.org
Fixes: 32d59773da38 ("arm: add support for TIF_NOTIFY_SIGNAL")
Reported-and-tested-by: Hui Tang <tanghui20@huawei.com>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Link: https://lore.kernel.org/lkml/7ecb8f3c-2aeb-a905-0d4a-aa768b9649b5@huawei.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 340a982825f76f1cff0daa605970fe47321b5ee7 ]
Actually in no-MMU SoCs(i.e. i.MXRT) ZERO_PAGE(vaddr) expands to
```
virt_to_page(0)
```
that in order expands to:
```
pfn_to_page(virt_to_pfn(0))
```
and then virt_to_pfn(0) to:
```
((((unsigned long)(0) - PAGE_OFFSET) >> PAGE_SHIFT) +
PHYS_PFN_OFFSET)
```
where PAGE_OFFSET and PHYS_PFN_OFFSET are the DRAM offset(0x80000000) and
PAGE_SHIFT is 12. This way we obtain 16MB(0x01000000) summed to the base of
DRAM(0x80000000).
When ZERO_PAGE(0) is then used, for example in bio_add_page(), the page
gets an address that is out of DRAM bounds.
So instead of using fake virtual page 0 let's allocate a dedicated
zero_page during paging_init() and assign it to a global 'struct page *
empty_zero_page' the same way mmu.c does and it's the same approach used
in m68k with commit dc068f462179 as discussed here[0]. Then let's move
ZERO_PAGE() definition to the top of pgtable.h to be in common between
mmu.c and nommu.c.
[0]: https://lore.kernel.org/linux-m68k/2a462b23-5b8e-bbf4-ec7d-778434a3b9d7@google.com/T/#m1266ceb63
ad140743174d6b3070364d3c9a5179b
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 612695bccfdbd52004551308a55bae410e7cd22f ]
Store the frame address where arm_get_current_stackframe() looks for it
(ARM_r7 instead of ARM_fp if CONFIG_THUMB2_KERNEL=y). Otherwise frame->fp
gets set to 0, causing unwind_frame() to fail.
# bpftrace -e 't:sched:sched_switch { @[kstack] = count(); exit(); }'
Attaching 1 probe...
@[
__schedule+1059
]: 1
A typical first unwind instruction is 0x97 (SP = R7), so after executing
it SP ends up being 0 and -URC_FAILURE is returned.
unwind_frame(pc = ac9da7d7 lr = 00000000 sp = c69bdda0 fp = 00000000)
unwind_find_idx(ac9da7d7)
unwind_exec_insn: insn = 00000097
unwind_exec_insn: fp = 00000000 sp = 00000000 lr = 00000000 pc = 00000000
With this patch:
# bpftrace -e 't:sched:sched_switch { @[kstack] = count(); exit(); }'
Attaching 1 probe...
@[
__schedule+1059
__schedule+1059
schedule+79
schedule_hrtimeout_range_clock+163
schedule_hrtimeout_range+17
ep_poll+471
SyS_epoll_wait+111
sys_epoll_pwait+231
__ret_fast_syscall+1
]: 1
Link: https://lore.kernel.org/r/20220920230728.2617421-1-tnovak@fb.com/
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tomislav Novak <tnovak@fb.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 08572cd41955166e387d9b4984294d37f8f7526c ]
This code appears to be no longer used so let's get rid of it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fb0fd3469ead5b937293c213daa1f589b4b7ce46 ]
Commit 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis")
added a check to determine whether arm_dma_zone_size is exceeding the
amount of kernel virtual address space available between the upper 4GB
virtual address limit and PAGE_OFFSET in order to provide a suitable
definition of MAX_DMA_ADDRESS that should fit within the 32-bit virtual
address space. The quantity used for comparison was off by a missing
trailing 0, leading to MAX_DMA_ADDRESS to be overflowing a 32-bit
quantity.
This was caught thanks to CONFIG_DEBUG_VIRTUAL on the bcm2711 platform
where we define a dma_zone_size of 1GB and we have a PAGE_OFFSET value
of 0xc000_0000 (CONFIG_VMSPLIT_3G) leading to MAX_DMA_ADDRESS being
0x1_0000_0000 which overflows the unsigned long type used throughout
__pa() and then __virt_addr_valid(). Because the virtual address passed
to __virt_addr_valid() would now be 0, the function would loudly warn
and flood the kernel log, thus making the platform unable to boot
properly.
Fixes: 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 598f0a99fa8a35be44b27106b43ddc66417af3b1 ]
commit 7a1be318f579 ("ARM: 9012/1: move device tree mapping out of linear
region") use FDT_FIXED_BASE to map the whole FDT_FIXED_SIZE memory area
which contains fdt. But it only reserves the exact physical memory that
fdt occupied. Unfortunately, this mapping is non-shareable. An illegal or
speculative read access can bring the RAM content from non-fdt zone into
cache, PIPT makes it to be hit by subsequently read access through
shareable mapping(such as linear mapping), and the cache consistency
between cores is lost due to non-shareable property.
|<---------FDT_FIXED_SIZE------>|
| |
-------------------------------
| <non-fdt> | <fdt> | <non-fdt> |
-------------------------------
1. CoreA read <non-fdt> through MT_ROM mapping, the old data is loaded
into the cache.
2. CoreB write <non-fdt> to update data through linear mapping. CoreA
received the notification to invalid the corresponding cachelines, but
the property non-shareable makes it to be ignored.
3. CoreA read <non-fdt> through linear mapping, cache hit, the old data
is read.
To eliminate this risk, add a new memory type MT_MEMORY_RO. Compared to
MT_ROM, it is shareable and non-executable.
Here's an example:
list_del corruption. prev->next should be c0ecbf74, but was c08410dc
kernel BUG at lib/list_debug.c:53!
... ...
PC is at __list_del_entry_valid+0x58/0x98
LR is at __list_del_entry_valid+0x58/0x98
psr: 60000093
sp : c0ecbf30 ip : 00000000 fp : 00000001
r10: c08410d0 r9 : 00000001 r8 : c0825e0c
r7 : 20000013 r6 : c08410d0 r5 : c0ecbf74 r4 : c0ecbf74
r3 : c0825d08 r2 : 00000000 r1 : df7ce6f4 r0 : 00000044
... ...
Stack: (0xc0ecbf30 to 0xc0ecc000)
bf20: c0ecbf74 c0164fd0 c0ecbf70 c0165170
bf40: c0eca000 c0840c00 c0840c00 c0824500 c0825e0c c0189bbc c088f404 60000013
bf60: 60000013 c0e85100 000004ec 00000000 c0ebcdc0 c0ecbf74 c0ecbf74 c0825d08
... ... < next prev >
(__list_del_entry_valid) from (__list_del_entry+0xc/0x20)
(__list_del_entry) from (finish_swait+0x60/0x7c)
(finish_swait) from (rcu_gp_kthread+0x560/0xa20)
(rcu_gp_kthread) from (kthread+0x14c/0x15c)
(kthread) from (ret_from_fork+0x14/0x24)
The faulty list node to be deleted is a local variable, its address is
c0ecbf74. The dumped stack shows that 'prev' = c0ecbf74, but its value
before lib/list_debug.c:53 is c08410dc. A large amount of printing results
in swapping out the cacheline containing the old data(MT_ROM mapping is
read only, so the cacheline cannot be dirty), and the subsequent dump
operation obtains new data from the DDR.
Fixes: 7a1be318f579 ("ARM: 9012/1: move device tree mapping out of linear region")
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e5c46fde75e43c15a29b40e5fc5641727f97ae47 upstream.
After emulating a misaligned load or store issued in Thumb mode, we have
to advance the IT state by hand, or it will get out of sync with the
actual instruction stream, which means we'll end up applying the wrong
condition code to subsequent instructions. This might corrupt the
program state rather catastrophically.
So borrow the it_advance() helper from the probing code, and use it on
CPSR if the emulated instruction is Thumb.
Cc: <stable@vger.kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6efb50923771f392122f5ce69dfc43b08f16e449 upstream.
There are cases where a context synchronization event is necessary
between an IRQ being raised and being handled, and there are races such
that we cannot rely upon the exception entry being subsequent to the
interrupt being raised. To fix this, we place an ISB between a read of
IAR and the subsequent invocation of an IRQ handler.
When EOI mode 1 is in use, we need to EOI an interrupt prior to invoking
its handler, and we have a write to EOIR for this. As this write to EOIR
requires an ISB, and this is provided by the gic_write_eoir() helper, we
omit the usual ISB in this case, with the logic being:
| if (static_branch_likely(&supports_deactivate_key))
| gic_write_eoir(irqnr);
| else
| isb();
This is somewhat opaque, and it would be a little clearer if there were
an unconditional ISB, with only the write to EOIR being conditional,
e.g.
| if (static_branch_likely(&supports_deactivate_key))
| write_gicreg(irqnr, ICC_EOIR1_EL1);
|
| isb();
This patch rewrites the code that way, with this logic factored into a
new helper function with comments explaining what the ISB is for, as
were originally laid out in commit:
39a06b67c2c1256b ("irqchip/gic: Ensure we have an ISB between ack and ->handle_irq")
Note that since then, we removed the IAR polling in commit:
342677d70ab92142 ("irqchip/gic-v3: Remove acknowledge loop")
... which removed one of the two race conditions.
For consistency, other portions of the driver are made to manipulate
EOIR using write_gicreg() and explcit ISBs, and the gic_write_eoir()
helper function is removed.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220513133038.226182-3-mark.rutland@arm.com
Cc: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff8a8f59c99f6a7c656387addc4d9f2247d75077 upstream.
In the event that random_get_entropy() can't access a cycle counter or
similar, falling back to returning 0 is really not the best we can do.
Instead, at least calling random_get_entropy_fallback() would be
preferable, because that always needs to return _something_, even
falling back to jiffies eventually. It's not as though
random_get_entropy_fallback() is super high precision or guaranteed to
be entropic, but basically anything that's not zero all the time is
better than returning zero all the time.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 260364d112bc822005224667c0c9b1b17a53eafd upstream.
The semantics of pfn_valid() is to check presence of the memory map for a
PFN and not whether a PFN is covered by the linear map. The memory map
may be present for NOMAP memory regions, but they won't be mapped in the
linear mapping. Accessing such regions via __va() when they are
memremap()'ed will cause a crash.
On v5.4.y the crash happens on qemu-arm with UEFI [1]:
<1>[ 0.084476] 8<--- cut here ---
<1>[ 0.084595] Unable to handle kernel paging request at virtual address dfb76000
<1>[ 0.084938] pgd = (ptrval)
<1>[ 0.085038] [dfb76000] *pgd=5f7fe801, *pte=00000000, *ppte=00000000
...
<4>[ 0.093923] [<c0ed6ce8>] (memcpy) from [<c16a06f8>] (dmi_setup+0x60/0x418)
<4>[ 0.094204] [<c16a06f8>] (dmi_setup) from [<c16a38d4>] (arm_dmi_init+0x8/0x10)
<4>[ 0.094408] [<c16a38d4>] (arm_dmi_init) from [<c0302e9c>] (do_one_initcall+0x50/0x228)
<4>[ 0.094619] [<c0302e9c>] (do_one_initcall) from [<c16011e4>] (kernel_init_freeable+0x15c/0x1f8)
<4>[ 0.094841] [<c16011e4>] (kernel_init_freeable) from [<c0f028cc>] (kernel_init+0x8/0x10c)
<4>[ 0.095057] [<c0f028cc>] (kernel_init) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
On kernels v5.10.y and newer the same crash won't reproduce on ARM because
commit b10d6bca8720 ("arch, drivers: replace for_each_membock() with
for_each_mem_range()") changed the way memory regions are registered in
the resource tree, but that merely covers up the problem.
On ARM64 memory resources registered in yet another way and there the
issue of wrong usage of pfn_valid() to ensure availability of the linear
map is also covered.
Implement arch_memremap_can_ram_remap() on ARM and ARM64 to prevent access
to NOMAP regions via the linear mapping in memremap().
Link: https://lore.kernel.org/all/Yl65zxGgFzF1Okac@sirena.org.uk
Link: https://lkml.kernel.org/r/20220426060107.7618-1-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 68453767131a5deec1e8f9ac92a9042f929e585d upstream.
When CONFIG_GENERIC_CPU_VULNERABILITIES is not set, references
to spectre_v2_update_state() cause a build error, so provide an
empty stub for that function when the Kconfig option is not set.
Fixes this build error:
arm-linux-gnueabi-ld: arch/arm/mm/proc-v7-bugs.o: in function `cpu_v7_bugs_init':
proc-v7-bugs.c:(.text+0x52): undefined reference to `spectre_v2_update_state'
arm-linux-gnueabi-ld: proc-v7-bugs.c:(.text+0x82): undefined reference to `spectre_v2_update_state'
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 36168e387fa7d0f1fe0cd5cf76c8cea7aee714fa upstream.
ld.lld does not support the NOCROSSREFS directive at the moment, which
breaks the build after commit b9baf5c8c5c3 ("ARM: Spectre-BHB
workaround"):
ld.lld: error: ./arch/arm/kernel/vmlinux.lds:34: AT expected, but got NOCROSSREFS
Support for this directive will eventually be implemented, at which
point a version check can be added. To avoid breaking the build in the
meantime, just define NOCROSSREFS to nothing when using ld.lld, with a
link to the issue for tracking.
Cc: stable@vger.kernel.org
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Link: https://github.com/ClangBuiltLinux/linux/issues/1609
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 33970b031dc4653cc9dc80f2886976706c4c8ef1 upstream.
In the recent Spectre BHB patches, there was a typo that is only
exposed in certain configurations: mcr p15,0,XX,c7,r5,4 should have
been mcr p15,0,XX,c7,c5,4
Reported-by: kernel test robot <lkp@intel.com>
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b9baf5c8c5c356757f4f9d8180b5e9d234065bc3 upstream.
Workaround the Spectre BHB issues for Cortex-A15, Cortex-A57,
Cortex-A72, Cortex-A73 and Cortex-A75. We also include Brahma B15 as
well to be safe, which is affected by Spectre V2 in the same ways as
Cortex-A15.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[changes due to lack of SYSTEM_FREEING_INITMEM - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8d9d651ff2270a632e9dc497b142db31e8911315 upstream.
Use the linker's LOADADDR() macro to get the load address of the
sections, and provide a macro to set the start and end symbols.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9dd78194a3722fa6712192cdd4f7032d45112a9a upstream.
As per other architectures, add support for reporting the Spectre
vulnerability status via sysfs CPU.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9f80ccda53b9417236945bc7ece4b519037df74d upstream.
When building for Thumb2, the .alt.smp.init sections that are emitted by
the ALT_UP() patching code may not be 32-bit aligned, even though the
fixup_smp_on_up() routine expects that. This results in alignment faults
at module load time, which need to be fixed up by the fault handler.
So let's align those sections explicitly, and prevent this from occurring.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 15420269b02a63ed8c1841905d8b8b2403246004 upstream.
The helpers that are used to implement copy_from_kernel_nofault() and
copy_to_kernel_nofault() cast a void* to a pointer to a wider type,
which may result in alignment faults on ARM if the compiler decides to
use double-word or multiple-word load/store instructions.
Only configurations that define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
are affected, given that commit 2423de2e6f4d ("ARM: 9115/1: mm/maccess:
fix unaligned copy_{from,to}_kernel_nofault") ensures that dst and src
are sufficiently aligned otherwise.
So use the unaligned accessors for accessing dst and src in cases where
they may be misaligned.
Cc: <stable@vger.kernel.org> # depends on 2423de2e6f4d
Fixes: 2df4c9a741a0 ("ARM: 9112/1: uaccess: add __{get,put}_kernel_nofault")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b0100bce4ff82ec1ccd3c1f3d339fd2df6a81784 ]
Since commit 4b563a066611 ("ARM: imx: Remove imx21 support"), the config
DEBUG_IMX21_IMX27_UART is really only debug support for IMX27.
So, rename this option to DEBUG_IMX27_UART and adjust dependencies in
Kconfig and rename the definitions to IMX27 as further clean-up.
This issue was discovered with ./scripts/checkkconfigsymbols.py, which
reported that DEBUG_IMX21_IMX27_UART depends on the non-existing config
SOC_IMX21.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4bc5e64e6cf37007e436970024e5998ee0935651 upstream.
Commit 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup
for all arches") made the Generic System Framebuffers (sysfb) driver able
to be built on non-x86 architectures.
But it left the efifb_setup_from_dmi() function prototype declaration in
the architecture specific headers. This could lead to the following
compiler warning as reported by the kernel test robot:
drivers/firmware/efi/sysfb_efi.c:70:6: warning: no previous prototype for function 'efifb_setup_from_dmi' [-Wmissing-prototypes]
void efifb_setup_from_dmi(struct screen_info *si, const char *opt)
^
drivers/firmware/efi/sysfb_efi.c:70:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void efifb_setup_from_dmi(struct screen_info *si, const char *opt)
Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches")
Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20211126001333.555514-1-javierm@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ARM: kasan: Fix __get_user_check failure with kasan
In macro __get_user_check defined in arch/arm/include/asm/uaccess.h,
error code is store in register int __e(r0). When kasan is
enabled, assigning value to kernel address might trigger kasan check,
which unexpectedly overwrites r0 and causes undefined behavior on arm
kasan images.
One example is failure in do_futex and results in process soft lockup.
Log:
watchdog: BUG: soft lockup - CPU#0 stuck for 62946ms! [rs:main
Q:Reg:1151]
...
(__asan_store4) from (futex_wait_setup+0xf8/0x2b4)
(futex_wait_setup) from (futex_wait+0x138/0x394)
(futex_wait) from (do_futex+0x164/0xe40)
(do_futex) from (sys_futex_time32+0x178/0x230)
(sys_futex_time32) from (ret_fast_syscall+0x0/0x50)
The soft lockup happens in function futex_wait_setup. The reason is
function get_futex_value_locked always return EINVAL, thus pc jump
back to retry label and causes looping.
This line in function get_futex_value_locked
ret = __get_user(*dest, from);
is expanded to
*dest = (typeof(*(p))) __r2; ,
in macro __get_user_check. Writing to pointer dest triggers kasan check
and overwrites the return value of __get_user_x function.
The assembly code of get_futex_value_locked in kernel/futex.c:
...
c01f6dc8: eb0b020e bl c04b7608 <__get_user_4>
// "x = (typeof(*(p))) __r2;" triggers kasan check and r0 is overwritten
c01f6dCc: e1a00007 mov r0, r7
c01f6dd0: e1a05002 mov r5, r2
c01f6dd4: eb04f1e6 bl c0333574 <__asan_store4>
c01f6dd8: e5875000 str r5, [r7]
// save ret value of __get_user(*dest, from), which is dest address now
c01f6ddc: e1a05000 mov r5, r0
...
// checking return value of __get_user failed
c01f6e00: e3550000 cmp r5, #0
...
c01f6e0c: 01a00005 moveq r0, r5
// assign return value to EINVAL
c01f6e10: 13e0000d mvnne r0, #13
Return value is the destination address of get_user thus certainly
non-zero, so get_futex_value_locked always return EINVAL.
Fix it by using a tmp vairable to store the error code before the
assignment. This fix has no effects to non-kasan images thanks to compiler
optimization. It only affects cases that overwrite r0 due to kasan check.
This should fix bug discussed in Link:
[1] https://lore.kernel.org/linux-arm-kernel/0ef7c2a5-5d8b-c5e0-63fa-31693fd4495c@gmail.com/
Fixes: 421015713b30 ("ARM: 9017/2: Enable KASan for ARM")
Signed-off-by: Lexi Shao <shaolexi@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Pull ARM development updates from Russell King:
- Rename "mod_init" and "mod_exit" so that initcall debug output is
actually useful (Randy Dunlap)
- Update maintainers entries for linux-arm-kernel to indicate it is
moderated for non-subscribers (Randy Dunlap)
- Move install rules to arch/arm/Makefile (Masahiro Yamada)
- Drop unnecessary ARCH_NR_GPIOS definition (Linus Walleij)
- Don't warn about atags_to_fdt() stack size (David Heidelberg)
- Speed up unaligned copy_{from,to}_kernel_nofault (Arnd Bergmann)
- Get rid of set_fs() usage (Arnd Bergmann)
- Remove checks for GCC prior to v4.6 (Geert Uytterhoeven)
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9118/1: div64: Remove always-true __div64_const32_is_OK() duplicate
ARM: 9117/1: asm-generic: div64: Remove always-true __div64_const32_is_OK()
ARM: 9116/1: unified: Remove check for gcc < 4
ARM: 9110/1: oabi-compat: fix oabi epoll sparse warning
ARM: 9113/1: uaccess: remove set_fs() implementation
ARM: 9112/1: uaccess: add __{get,put}_kernel_nofault
ARM: 9111/1: oabi-compat: rework fcntl64() emulation
ARM: 9114/1: oabi-compat: rework sys_semtimedop emulation
ARM: 9108/1: oabi-compat: rework epoll_wait/epoll_pwait emulation
ARM: 9107/1: syscall: always store thread_info->abi_syscall
ARM: 9109/1: oabi-compat: add epoll_pwait handler
ARM: 9106/1: traps: use get_kernel_nofault instead of set_fs()
ARM: 9115/1: mm/maccess: fix unaligned copy_{from,to}_kernel_nofault
ARM: 9105/1: atags_to_fdt: don't warn about stack size
ARM: 9103/1: Drop ARCH_NR_GPIOS definition
ARM: 9102/1: move theinstall rules to arch/arm/Makefile
ARM: 9100/1: MAINTAINERS: mark all linux-arm-kernel@infradead list as moderated
ARM: 9099/1: crypto: rename 'mod_init' & 'mod_exit' functions to be module-specific
|
|
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
|
|
flush_kernel_dcache_page is a rather confusing interface that implements a
subset of flush_dcache_page by not being able to properly handle page
cache mapped pages.
The only callers left are in the exec code as all other previous callers
were incorrect as they could have dealt with page cache pages. Replace
the calls to flush_kernel_dcache_page with calls to flush_dcache_page,
which for all architectures does either exactly the same thing, can
contains one or more of the following:
1) an optimization to defer the cache flush for page cache pages not
mapped into userspace
2) additional flushing for mapped page cache pages if cache aliases
are possible
Link: https://lkml.kernel.org/r/20210712060928.4161649-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull ARM SoC updates from Arnd Bergmann:
"There are three noteworthy updates for 32-bit arm platforms this time:
- The Microchip SAMA7 family based on Cortex-A7 gets introduced, a
new cousin to the older SAM9 (ARM9xx based) and SAMA5 (Cortex-A5
based) SoCs.
- The ixp4xx platform (based on Intel XScale) is finally converted to
device tree, and all the old board files are getting removed now.
- The Cirrus Logic EP93xx platform loses support for the old
MaverickCrunch FPU. Support for compiling user space applications
was already removed in gcc-4.9, and the kernel support for old
applications could not be built with clang ias. After confirming
that there are no remaining users, removing this from the kernel
seemed better than adding support for unused features to clang.
There are minor updates to the aspeed, omap and samsung platforms"
* tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
soc: aspeed-lpc-ctrl: Fix clock cleanup in error path
ARM: s3c: delete unneed local variable "delay"
soc: aspeed: Re-enable FWH2AHB on AST2600
soc: aspeed: socinfo: Add AST2625 variant
soc: aspeed: p2a-ctrl: Fix boundary check for mmap
soc: aspeed: lpc-ctrl: Fix boundary check for mmap
ARM: ixp4xx: Delete the Freecom FSG-3 boardfiles
ARM: ixp4xx: Delete GTWX5715 board files
ARM: ixp4xx: Delete Coyote and IXDPG425 boardfiles
ARM: ixp4xx: Delete Intel reference design boardfiles
ARM: ixp4xx: Delete Avila boardfiles
ARM: ixp4xx: Delete the Arcom Vulcan boardfiles
ARM: ixp4xx: Delete Gateway WG302v2 boardfiles
ARM: ixp4xx: Delete Omicron boardfiles
ARM: ixp4xx: Delete the D-Link DSM-G600 boardfiles
ARM: ixp4xx: Delete NAS100D boardfiles
ARM: ixp4xx: Delete NSLU2 boardfiles
arm: omap2: Drop the unused OMAP_PACKAGE_* KConfig entries
arm: omap2: Drop obsolete MACH_OMAP3_PANDORA entry
ARM: ep93xx: remove MaverickCrunch support
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- i915 has seen a lot of refactoring and uAPI cleanups due to a
change in the upstream direction going forward
This has all been audited with known userspace, but there may be
some pitfalls that were missed.
- i915 now uses common TTM to enable discrete memory on DG1/2 GPUs
- i915 enables Jasper and Elkhart Lake by default and has preliminary
XeHP/DG2 support
- amdgpu adds support for Cyan Skillfish
- lots of implicit fencing rules documented and fixed up in drivers
- msm now uses the core scheduler
- the irq midlayer has been removed for non-legacy drivers
- the sysfb code now works on more than x86.
Otherwise the usual smattering of stuff everywhere, panels, bridges,
refactorings.
Detailed summary:
core:
- extract i915 eDP backlight into core
- DP aux bus support
- drm_device.irq_enabled removed
- port drivers to native irq interfaces
- export gem shadow plane handling for vgem
- print proper driver name in framebuffer registration
- driver fixes for implicit fencing rules
- ARM fixed rate compression modifier added
- updated fb damage handling
- rmfb ioctl logging/docs
- drop drm_gem_object_put_locked
- define DRM_FORMAT_MAX_PLANES
- add gem fb vmap/vunmap helpers
- add lockdep_assert(once) helpers
- mark drm irq midlayer as legacy
- use offset adjusted bo mapping conversion
vgaarb:
- cleanups
fbdev:
- extend efifb handling to all arches
- div by 0 fixes for multiple drivers
udmabuf:
- add hugepage mapping support
dma-buf:
- non-dynamic exporter fixups
- document implicit fencing rules
amdgpu:
- Initial Cyan Skillfish support
- switch virtual DCE over to vkms based atomic
- VCN/JPEG power down fixes
- NAVI PCIE link handling fixes
- AMD HDMI freesync fixes
- Yellow Carp + Beige Goby fixes
- Clockgating/S0ix/SMU/EEPROM fixes
- embed hw fence in job
- rework dma-resv handling
- ensure eviction to system ram
amdkfd:
- uapi: SVM address range query added
- sysfs leak fix
- GPUVM TLB optimizations
- vmfault/migration counters
i915:
- Enable JSL and EHL by default
- preliminary XeHP/DG2 support
- remove all CNL support (never shipped)
- move to TTM for discrete memory support
- allow mixed object mmap handling
- GEM uAPI spring cleaning
- add I915_MMAP_OBJECT_FIXED
- reinstate ADL-P mmap ioctls
- drop a bunch of unused by userspace features
- disable and remove GPU relocations
- revert some i915 misfeatures
- major refactoring of GuC for Gen11+
- execbuffer object locking separate step
- reject caching/set-domain on discrete
- Enable pipe DMC loading on XE-LPD and ADL-P
- add PSF GV point support
- Refactor and fix DDI buffer translations
- Clean up FBC CFB allocation code
- Finish INTEL_GEN() and friends macro conversions
nouveau:
- add eDP backlight support
- implicit fence fix
msm:
- a680/7c3 support
- drm/scheduler conversion
panfrost:
- rework GPU reset
virtio:
- fix fencing for planes
ast:
- add detect support
bochs:
- move to tiny GPU driver
vc4:
- use hotplug irqs
- HDMI codec support
vmwgfx:
- use internal vmware device headers
ingenic:
- demidlayering irq
rcar-du:
- shutdown fixes
- convert to bridge connector helpers
zynqmp-dsub:
- misc fixes
mgag200:
- convert PLL handling to atomic
mediatek:
- MT8133 AAL support
- gem mmap object support
- MT8167 support
etnaviv:
- NXP Layerscape LS1028A SoC support
- GEM mmap cleanups
tegra:
- new user API
exynos:
- missing unlock fix
- build warning fix
- use refcount_t"
* tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits)
drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box
drm/amd/display: Remove duplicate dml init
drm/amd/display: Update bounding box states (v2)
drm/amd/display: Update number of DCN3 clock states
drm/amdgpu: disable GFX CGCG in aldebaran
drm/amdgpu: Clear RAS interrupt status on aldebaran
drm/amdgpu: Add support for RAS XGMI err query
drm/amdkfd: Account for SH/SE count when setting up cu masks.
drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain
drm/amdgpu: drop redundant cancel_delayed_work_sync call
drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend
drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend
drm/amdkfd: map SVM range with correct access permission
drm/amdkfd: check access permisson to restore retry fault
drm/amdgpu: Update RAS XGMI Error Query
drm/amdgpu: Add driver infrastructure for MCA RAS
drm/amd/display: Add Logging for HDMI color depth information
drm/amd/amdgpu: consolidate PSP TA init shared buf functions
drm/amd/amdgpu: add name field back to ras_common_if
drm/amdgpu: Fix build with missing pm_suspend_target_state module export
...
|
|
Since commit cafa0010cd51fb71 ("Raise the minimum required gcc version
to 4.6"), the kernel can no longer be compiled using gcc-3.
Hence __div64_const32_is_OK() is always true.
Moreover, __div64_const32_is_OK() is defined in the same way in
include/asm-generic/div64.h, so the ARM-specific definition can be
removed regardless.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Since commit cafa0010cd51fb71 ("Raise the minimum required gcc version
to 4.6"), the kernel can no longer be compiled using gcc-3.
Hence this condition is never true, and the check can thus be removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
There are no remaining callers of set_fs(), so just remove it
along with all associated code that operates on
thread_info->addr_limit.
There are still further optimizations that can be done:
- In get_user(), the address check could be moved entirely
into the out of line code, rather than passing a constant
as an argument,
- I assume the DACR handling can be simplified as we now
only change it during user access when CONFIG_CPU_SW_DOMAIN_PAN
is set, but not during set_fs().
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
These mimic the behavior of get_user and put_user, except
for domain switching, address limit checking and handling
of mismatched sizes, none of which are relevant here.
To work with pre-Armv6 kernels, this has to avoid TUSER()
inside of the new macros, the new approach passes the "t"
string along with the opcode, which is a bit uglier but
avoids duplicating more code.
As there is no __get_user_asm_dword(), I work around it
by copying 32 bit at a time, which is possible because
the output size is known.
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
The epoll_wait() system call wrapper is one of the remaining users of
the set_fs() infrasturcture for Arm. Changing it to not require set_fs()
is rather complex unfortunately.
The approach I'm taking here is to allow architectures to override
the code that copies the output to user space, and let the oabi-compat
implementation check whether it is getting called from an EABI or OABI
system call based on the thread_info->syscall value.
The in_oabi_syscall() check here mirrors the in_compat_syscall() and
in_x32_syscall() helpers for 32-bit compat implementations on other
architectures.
Overall, the amount of code goes down, at least with the newly added
sys_oabi_epoll_pwait() helper getting removed again. The downside
is added complexity in the source code for the native implementation.
There should be no difference in runtime performance except for Arm
kernels with CONFIG_OABI_COMPAT enabled that now have to go through
an external function call to check which of the two variants to use.
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
The system call number is used in a a couple of places, in particular
ptrace, seccomp and /proc/<pid>/syscall.
The last one apparently never worked reliably on ARM for tasks that are
not currently getting traced.
Storing the syscall number in the normal entry path makes it work,
as well as allowing us to see if the current system call is for OABI
compat mode, which is the next thing I want to hook into.
Since the thread_info->syscall field is not just the number any more, it
is now renamed to abi_syscall. In kernels that enable both OABI and EABI,
the upper bits of this field encode 0x900000 (__NR_OABI_SYSCALL_BASE)
for OABI tasks, while normal EABI tasks do not set the upper bits. This
makes it possible to implement the in_oabi_syscall() helper later.
All other users of thread_info->syscall go through the syscall_get_nr()
helper, which in turn filters out the ABI bits.
Note that the ABI information is lost with PTRACE_SET_SYSCALL, so one
cannot set the internal number to a particular version, but this was
already the case. We could change it to let gdb encode the ABI type along
with the syscall in a CONFIG_OABI_COMPAT-enabled kernel, but that itself
would be a (backwards-compatible) ABI change, so I don't do it here.
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
This fixes a Keystone 2 regression discovered as a side effect of
defining an passing the physical start/end sections of the kernel
to the MMU remapping code.
As the Keystone applies an offset to all physical addresses,
including those identified and patches by phys2virt, we fail to
account for this offset in the kernel_sec_start and kernel_sec_end
variables.
Further these offsets can extend into the 64bit range on LPAE
systems such as the Keystone 2.
Fix it like this:
- Extend kernel_sec_start and kernel_sec_end to be 64bit
- Add the offset also to kernel_sec_start and kernel_sec_end
As passing kernel_sec_start and kernel_sec_end as 64bit invariably
incurs BE8 endianness issues I have attempted to dry-code around
these.
Tested on the Vexpress QEMU model both with and without LPAE
enabled.
Fixes: 6e121df14ccd ("ARM: 9090/1: Map the lowmem and kernel separately")
Reported-by: Nishanth Menon <nmenon@kernel.org>
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Nishanth Menon <nmenon@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
The conditional by the generic header is the same,
hence drop unnecessary duplication.
Link: https://lore.kernel.org/r/20210510114107.43006-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
The MaverickCrunch support for ep93xx never made it into glibc and
was removed from gcc in its 4.8 release in 2012. It is now one of
the last parts of arch/arm/ that fails to build with the clang
integrated assembler, which is unlikely to ever want to support it.
The two alternatives are to force the use of binutils/gas when
building the crunch support, or to remove it entirely.
According to Hartley Sweeten:
"Martin Guy did a lot of work trying to get the maverick crunch working
but I was never able to successfully use it for anything. It "kind"
of works but depending on the EP93xx silicon revision there are still
a number of hardware bugs that either give imprecise or garbage results.
I have no problem with removing the kernel support for the maverick
crunch."
Unless someone else comes up with a good reason to keep it around,
remove it now. This touches mostly the ep93xx platform, but removes
a bit of code from ARM common ptrace and signal frame handling as well.
If there are remaining users of MaverickCrunch, they can use LTS
kernels for at least another five years before kernel support ends.
Link: https://lore.kernel.org/linux-arm-kernel/20210802141245.1146772-1-arnd@kernel.org/
Link: https://lore.kernel.org/linux-arm-kernel/20210226164345.3889993-1-arnd@kernel.org/
Link: https://github.com/ClangBuiltLinux/linux/issues/1272
Link: https://gcc.gnu.org/legacy-ml/gcc/2008-03/msg01063.html
Cc: "Martin Guy" <martinwguy@martinwguy@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15-rc1:
UAPI Changes:
- Remove sysfs stats for dma-buf attachments, as it causes a performance regression.
Previous merge is not in a rc kernel yet, so no userspace regression possible.
Cross-subsystem Changes:
- Sanitize user input in kyro's viewport ioctl.
- Use refcount_t in fb_info->count
- Assorted fixes to dma-buf.
- Extend x86 efifb handling to all archs.
- Fix neofb divide by 0.
- Document corpro,gm7123 bridge dt bindings.
Core Changes:
- Slightly rework drm master handling.
- Cleanup vgaarb handling.
- Assorted fixes.
Driver Changes:
- Add support for ws2401 panel.
- Assorted fixes to stm, ast, bochs.
- Demidlayer ingenic irq.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2d0d2fe8-01fc-e216-c3fd-38db9e69944e@linux.intel.com
|
|
The register_gop_device() function registers an "efi-framebuffer" platform
device to match against the efifb driver, to have an early framebuffer for
EFI platforms.
But there is already support to do exactly the same by the Generic System
Framebuffers (sysfb) driver. This used to be only for X86 but it has been
moved to drivers/firmware and could be reused by other architectures.
Also, besides supporting registering an "efi-framebuffer", this driver can
register a "simple-framebuffer" allowing to use the siple{fb,drm} drivers
on non-X86 EFI platforms. For example, on aarch64 these drivers can only
be used with DT and doesn't have code to register a "simple-frambuffer"
platform device when booting with EFI.
For these reasons, let's remove the register_gop_device() duplicated code
and instead move the platform specific logic that's there to sysfb driver.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625131359.1804394-1-javierm@redhat.com
|
|
No functional change in this patch.
[aneesh.kumar@linux.ibm.com: fix]
Link: https://lkml.kernel.org/r/87wnqtnb60.fsf@linux.ibm.com
[sfr@canb.auug.org.au: another fix]
Link: https://lkml.kernel.org/r/20210619134410.89559-1-aneesh.kumar@linux.ibm.com
Link: https://lkml.kernel.org/r/20210615110859.320299-1-aneesh.kumar@linux.ibm.com
Link: https://lore.kernel.org/linuxppc-dev/CAHk-=wi+J+iodze9FtjM3Zi4j4OeS+qqbKxME9QN4roxPEXH9Q@mail.gmail.com/
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull ARM development updates from Russell King:
- Make it clear __swp_entry_to_pte() uses PTE_TYPE_FAULT
- Updates for setting vmalloc size via command line to resolve an issue
with the 8MiB hole not properly being accounted for, and clean up the
code.
- ftrace support for module PLTs
- Spelling fixes
- kbuild updates for removing generated files and pattern rules for
generating files
- Clang/llvm updates
- Change the way the kernel is mapped, placing it in vmalloc space
instead.
- Remove arm_pm_restart from arm and aarch64.
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (29 commits)
ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACE
ARM: 9097/1: mmu: Declare section start/end correctly
ARM: 9096/1: Remove arm_pm_restart()
ARM: 9095/1: ARM64: Remove arm_pm_restart()
ARM: 9094/1: Register with kernel restart handler
ARM: 9093/1: drivers: firmwapsci: Register with kernel restart handler
ARM: 9092/1: xen: Register with kernel restart handler
ARM: 9091/1: Revert "mm: qsd8x50: Fix incorrect permission faults"
ARM: 9090/1: Map the lowmem and kernel separately
ARM: 9089/1: Define kernel physical section start and end
ARM: 9088/1: Split KERNEL_OFFSET from PAGE_OFFSET
ARM: 9087/1: kprobes: test-thumb: fix for LLVM_IAS=1
ARM: 9086/1: syscalls: use pattern rules to generate syscall headers
ARM: 9085/1: remove unneeded abi parameter to syscallnr.sh
ARM: 9084/1: simplify the build rule of mach-types.h
ARM: 9083/1: uncompress: atags_to_fdt: Spelling s/REturn/Return/
ARM: 9082/1: [v2] mark prepare_page_table as __init
ARM: 9079/1: ftrace: Add MODULE_PLTS support
ARM: 9078/1: Add warn suppress parameter to arm_gen_branch_link()
ARM: 9077/1: PLT: Move struct plt_entries definition to header
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm/unaligned.h unification from Arnd Bergmann:
"Unify asm/unaligned.h around struct helper
The get_unaligned()/put_unaligned() helpers are traditionally
architecture specific, with the two main variants being the
"access-ok.h" version that assumes unaligned pointer accesses always
work on a particular architecture, and the "le-struct.h" version that
casts the data to a byte aligned type before dereferencing, for
architectures that cannot always do unaligned accesses in hardware.
Based on the discussion linked below, it appears that the access-ok
version is not realiable on any architecture, but the struct version
probably has no downsides. This series changes the code to use the
same implementation on all architectures, addressing the few
exceptions separately"
Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363
Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/
Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2
Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/
* tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: simplify asm/unaligned.h
asm-generic: uaccess: 1-byte access is always aligned
netpoll: avoid put_unaligned() on single character
mwifiex: re-fix for unaligned accesses
apparmor: use get_unaligned() only for multi-byte words
partitions: msdos: fix one-byte get_unaligned()
asm-generic: unaligned always use struct helpers
asm-generic: unaligned: remove byteshift helpers
powerpc: use linux/unaligned/le_struct.h on LE power7
m68k: select CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
sh: remove unaligned access for sh4a
openrisc: always use unaligned-struct header
asm-generic: use asm-generic/unaligned.h for most architectures
|
|
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
|
