summaryrefslogtreecommitdiff
path: root/arch/arm/configs/multi_v7_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2018-05-26Merge tag 'renesas-defconfig-for-v4.18' of ↵Olof Johansson1-1/+2
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig Renesas ARM Based SoC Defconfig Updates for v4.18 * Enable in shmobile and multi_v7 defconfigs to give wider test coverage: - Recently mainlined support for RZ/G1C (r8a77470) SoC - Renesas Watchdog (RENESAS_WDT) which is used on R-Car Gen2 and RZ/G1 platforms. * Disable in shmobile and multi_v7 defconfigs to avoid unecessary bloat: FB_SH_MOBILE_MERAM the last user of which was removed in v4.1 by a521422ea4ae6128 ("ARM: shmobile: mackerel: Remove Legacy C board code"). * tag 'renesas-defconfig-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: multi_v7_defconfig: Enable RENESAS_WDT ARM: shmobile: defconfig: Enable RENESAS_WDT_GEN ARM: multi_v7_defconfig: Disable CONFIG_FB_SH_MOBILE_MERAM ARM: shmobile: defconfig: Disable CONFIG_FB_SH_MOBILE_MERAM ARM: multi_v7_defconfig: Enable r8a77470 SoC ARM: shmobile: defconfig: Enable r8a77470 SoC Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-25Merge tag 'amlogic-defconfig' of ↵Olof Johansson1-0/+2
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/defconfig Amlogic: defconfig updates for v4.18 - multi_v7_defconfig: enable meson PWM, I2C drivers * tag 'amlogic-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: multi_v7_defconfig: enable the Meson PWM controller arm: multi_v7_defconfig: enable the Amlogic Meson I2C driver Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-16ARM: multi_v7_defconfig: Enable RENESAS_WDTSimon Horman1-0/+1
R-Car Gen2 and RZ/G1 platforms come with a watchdog IP, therefore enable its driver by default. It is enabled as a module to avoid increasing the kernel image size. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-14Merge tag 'samsung-defconfig-4.18' of ↵Olof Johansson1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig Samsung defconfig changes for v4.18 1. Enable Samsung S6E63J0X03 DSI panel. * tag 'samsung-defconfig-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: multi_v7_config: enable S6E63J0X03 panel driver ARM: exynos_defconfig: enable S6E63J0X03 panel driver Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14Merge tag 'arm-soc/for-4.18/defconfig' of ↵Olof Johansson1-0/+4
https://github.com/Broadcom/stblinux into next/defconfig This pull request contains Broadcom ARM-based SoCs defconfig changes for 4.18, please pull the following: - Stefan provides a set of updates targeting the Raspberry Pi 3 B+ platform: LAN7515 USB Ethernet driver, Cypress CYW43455 Bluetooth and he also enables the VCHIQ driver to help with continous testing on kernelci.org. * tag 'arm-soc/for-4.18/defconfig' of https://github.com/Broadcom/stblinux: ARM: multi_v7_defconfig: Enable LAN and BT for RPi 3 B+ ARM: bcm2835_defconfig: Enable VCHIQ driver ARM: bcm2835_defconfig: Enable LAN78XX driver Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14ARM: multi_v7_defconfig: Add STM32F7 I2C & STM32 USBPHYC supportAlexandre Torgue1-0/+2
This patch adds STM32F7 I2C support to multi_v7_defconfig and enable the STM32 USB PHY Controller (USBPHYC) driver, implemented on STM32MP1 SoC. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-04-27ARM: multi_v7_defconfig: enable the Meson PWM controllerMartin Blumenstingl1-0/+1
This enables the Amlogic Meson PWM controller. It is used for a dimmable LED on some devices. Additionally some devices use it to generate the 32.768 kHz (low power oscillator) clock. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-04-27arm: multi_v7_defconfig: enable the Amlogic Meson I2C driverMartin Blumenstingl1-0/+1
Some boards come with a PMIC (system power controller, for example Ricoh RN5T618) which is connected through I2C. Enable the Meson I2C driver so the devices on the I2C bus can be registered during boot. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-04-23ARM: multi_v7_defconfig: Enable LAN and BT for RPi 3 B+Stefan Wahren1-0/+4
The Raspberry Pi 3 B+ has a Microchip LAN7515 (connect via USB) and a Cypress CYW43455 (connect via UART). This patch enables the necessary drivers. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-04-23ARM: multi_v7_defconfig: Disable CONFIG_FB_SH_MOBILE_MERAMGeert Uytterhoeven1-1/+0
The last Renesas ARM platform using this driver was removed in commit a521422ea4ae6128 ("ARM: shmobile: mackerel: Remove Legacy C board code"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16ARM: multi_v7_config: enable S6E63J0X03 panel driverMarek Szyprowski1-0/+1
Add a module with Samsung S6E63J0X03 DSI panel driver to enable support for display panel on Exynos3250-based Samsung Rinato board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-04-16ARM: multi_v7_defconfig: Enable r8a77470 SoCBiju Das1-0/+1
Enable recently added r8a77470 (RZ/G1C) SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-27ARM: multi_v7_defconfig: add NXP FlexCAN IP supportStefan Agner1-0/+1
Enable FlexCAN support as module by default. FlexCAN can be found on various NXP designs such as the i.MX and Vybrid SoC family. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27ARM: multi_v7_defconfig: enable thermal driver for i.MX devicesStefan Agner1-0/+1
Enable the i.MX thermal driver required for i.MX SoC family. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27ARM: multi_v7_defconfig: add RN5T618 PMIC family supportStefan Agner1-0/+3
This allows to successfully boot Colibri iMX7 which is using the Ricoh RN5T567 PMIC. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27ARM: multi_v7_defconfig: add NXP graphics driversStefan Agner1-0/+3
Enable drivers to support NXP graphics IPs such as: - Etnaviv (e.g. i.MX6) - DCU (e.g. Vybrid LS1021A) - mxsfb (e.g. i.MX6UL/ULL/7) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27ARM: multi_v7_defconfig: add GPMI NAND controller supportStefan Agner1-0/+1
Add GPMI NAND controller support as required by some NXP i.MX6/7 based boards. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCsStefan Agner1-0/+2
Enable on-chip OTP NVMEM support for NXP i.MX and VF610 SoCs. Since OTP values might be required by drivers required during boot, make sure the driver is built-in (e.g. i.MX thermal driver). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27ARM: multi_v7_defconfig: configure I2C driver built-inStefan Agner1-1/+1
PMIC often require the I2C bus, and the PMIC regulators might be necessary to power on eMMC/SD-card or other supplies required for successful boot. Make sure I2C driver for i.MX devices is built-in. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27Merge tag 'omap-for-v4.17/defconfig-pt2-signed' of ↵Arnd Bergmann1-0/+9
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Pull "Second set of defconfig changes for omap variants for v4.17" from Tony Lindgren: This series enables more devices working on droid4 to make it easier for people and distros to use out of the box. * tag 'omap-for-v4.17/defconfig-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules ARM: omap2plus_defconfig: Add UINPUT ARM: omap2plus_defconfig: Enable MDM6600 USB PHY ARM: omap2plus_defconfig: Add AUDIO_GRAPH_CARD ARM: omap2plus_defconfig: Enable PWM_VIBRA
2018-03-27Merge tag 'omap-for-v4.17/defconfig-signed' of ↵Arnd Bergmann1-0/+36
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Pull "Defconfig updates for omap variants for v4.17 merge window" from Tony Lindgren: We need to enable MMC_SDHCI option in both omap2plus_defconfig and multi_v7_defconfig so systems are able to mount root when the dts files get updated for sdhci. Then let's update omap2plus_defconfig so we can patch it easier. And as Arnd noticed earlier, just running make savedefconfig will accidentally drop few Kconfig options. This is happening because some options are no longer available as loadable modules like LIRC. Or new dependencies have been added such as SND_OSSEMUL for selecting SOUND_OSS_CORE. So we first move the unchanged options around to their make savedefconfig suggested place, then update the options to prevent make savedefconfig dropping some options accidentally, and then finally drop the unused options. And after that we enable options DRM_OMAP and 8250_OMAP. These both have been around for years now. And we do have 8250_OMAP warn about console being redirected with SERIAL_8250_OMAP_TTYO_FIXUP option that is enabled by default. Some users may need to update their inittab to use ttyS* instead of ttyO* though. If this turns out to be a problem, we may want to introduce a separate compatible for 8250-omap. But I think we're good to go with the SERIAL_8250_OMAP_TTYO_FIXUP warning now. Let's not update multi_v7_defconfig yet though and first see how 8250_OMAP change plays out. We also enable few new options for PM on am335x and am437x, and CEC in omap2plus_defconfig. Naturally similar options can be later on added to multi_v7_defconfig, but in this series we only enable OTG, MUSB and the related PHYs in multi_v7_defconfig to make it more usable for distros. * tag 'omap-for-v4.17/defconfig-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: multi_v7_defconfig: Enable USB gadget configfs as loadable module ARM: multi_v7_defconfig: Enable various USB PHYs found on omap variants ARM: multi_v7_defconfig: Enable OTG and MUSB as loadable modules ARM: omap2plus_defconfig: Enable 8250_OMAP ARM: omap2plus_defconfig: Switch to use omapdrm by default ARM: omap2plus_defconfig: Enable CEC ARM: omap2plus_defconfig: Enable am335x and am437x PM options ARM: omap2plus_defconfig: Drop unneeded options ARM: omap2plus_defconfig: Add SND_OSSEMUL ARM: omap2plus_defconfig: Update LIRC options ARM: omap2plus_defconfig: Select MFD_TI_LMU ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth ARM: omap2plus_defconfig: Update for moved options ARM: omap2plus_defconfig: Enable CONFIG_MMC_SDHCI_OMAP ARM: multi_v7_defconfig: Enable CONFIG_MMC_SDHCI_OMAP Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-20ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modulesTony Lindgren1-0/+9
We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-14Merge tag 'arm-soc/for-4.17/defconfig' of ↵Arnd Bergmann1-0/+4
https://github.com/Broadcom/stblinux into next/soc Pull "Broadcom defconfig changes for 4.17" from Florian Fainelli: This pull request contains multi_v7_defconfig changes for Broadcom ARM-based SoC for 4.17, please pull the following: - Tuomas enables the BCM2835 AUX driver which is necessary to provide console on the Raspberry Pi 3 - Stefan turns on support for the BCM43438 Bluetooth adapter connected via UART on the Raspberry Pi Zero Wireless and he also turns on support for the thermal driver on the Pi 2 and 3. * tag 'arm-soc/for-4.17/defconfig' of https://github.com/Broadcom/stblinux: ARM: multi_v7_defconfig: Enable thermal driver for RPi 2/3 ARM: bcm2385_defconfig: Enable BT support for BCM43438 ARM: multi_v7_defconfig: Enable serial console on RPi 3
2018-03-06ARM: multi_v7_defconfig: Enable USB gadget configfs as loadable moduleTony Lindgren1-0/+19
With USB OTG now enabled, it makes sense to allow configuring the USB gadgets via configfs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-06ARM: multi_v7_defconfig: Enable various USB PHYs found on omap variantsTony Lindgren1-0/+6
With MUSB USB OTG controller enabled, let's now enable the USB PHYs found on omap varian SoCs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-06ARM: multi_v7_defconfig: Enable OTG and MUSB as loadable modulesTony Lindgren1-0/+10
We can support USB OTG with MUSB driver on many ARM SoCs. Let's enable all the SoCs with MUSB as loadable modules. And let's enable their related DMA hardware. And as MUSB is an USB OTG controller, let's enable OTG support too. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-01ARM: multi_v7_defconfig: Enable CONFIG_MMC_SDHCI_OMAPKishon Vijay Abraham I1-0/+1
Enable CONFIG_MMC_SDHCI_OMAP so that TI's dra7/k2g based SoC's can use sdhci-omap for eMMC/SD/SDIO controller.. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-27ARM: multi_v7_defconfig: Enable thermal driver for RPi 2/3Stefan Wahren1-0/+1
This turns on the CONFIG_BCM2835_THERMAL as module for Raspberry Pi 2 and 3. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-02-26ARM: configs: multi_v7: add stm32 supportLudovic Barre1-0/+3
This patch adds stm32 support to multi_v7_defconfig Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-02-22ARM: multi_v7_defconfig: Enable serial console on RPi 3Tuomas Tynkkynen1-0/+3
The Raspberry Pi 3 uses the 8250-based auxilary UART of the BCM2837 SoC as the primary serial console of the board, so enable it in the multiplatform defconfig. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-02-02Merge tag 'armsoc-soc' of ↵Linus Torvalds1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "These are mostly minor bugfixes, cleanup and many defconfig updates to support added drivers. In particular OMAP and PXA keep cleaning up the legacy code base, as usual. Nvidia adds some more SoC support code for Tegra 186. For the first time on years, we are actually adding a non-DT platform for the EP93xx based Liebherr controller BK3.1. It's a minor variation of the EP93xx reference design and in active use, while EP93xx apparently doesn't have enough new development to have any device tree support" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: omap: hwmod: fix section mismatch warnings ARM: pxa/tosa-bt: add MODULE_LICENSE tag arm64: defconfig: enable CONFIG_ACPI_APEI_EINJ arm64: defconfig: enable EDAC GHES option arm64: defconfig: enable CONFIG_ACPI_APEI_MEMORY_FAILURE ARM: imx_v6_v7_defconfig: enable CONFIG_CPU_FREQ_STAT Wind down ARM/TANGO port ARM: davinci: constify gpio_led ARM: davinci: drop unneeded newline soc: Add SoC driver for Gemini ARM: SAMSUNG: Add SPDX license identifiers ARM: S5PV210: Add SPDX license identifiers ARM: S3C64XX: Add SPDX license identifiers ARM: S3C24XX: Add SPDX license identifiers ARM: EXYNOS: Add SPDX license identifiers ARM: imx: remove unused imx3 pm definitions ARM: imx: don't abort MMDC probe if power saving status doesn't match ARM: imx_v6_v7_defconfig: enable RTC_DRV_MXC_V2 ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM ARM: davinci: Use PTR_ERR_OR_ZERO() ...
2018-01-24irqdomain: Kill CONFIG_IRQ_DOMAIN_DEBUGMarc Zyngier1-1/+0
CONFIG_IRQ_DOMAIN_DEBUG is similar to CONFIG_GENERIC_IRQ_DEBUGFS, just with less information. Spring cleanup time. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yang Shunyong <shunyong.yang@hxt-semitech.com> Link: https://lkml.kernel.org/r/20180117142647.23622-1-marc.zyngier@arm.com
2018-01-05Merge tag 'omap-for-v4.16/defconfig-signed' of ↵Olof Johansson1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Two defconfig updates for omaps These are to configure dra7 PCIe for omap2plus_defconfig and multi_v7_defconfig. * tag 'omap-for-v4.16/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes) ARM: omap2plus_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes) Signed-off-by: Olof Johansson <olof@lixom.net>
2018-01-05Merge tag 'renesas-defconfig-for-v4.16' of ↵Olof Johansson1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Renesas ARM Based SoC Defconfig Updates for v4.16 shmobile_defconfig: * Enable PWM timers, which are present on R-Car and RZ/G1 platforms, as a built-in * Enable SGTL5000 audio codec, which is present on the he iWave RZ/G1M Q7 carrier board, as a built-in multi_v7_defconfig: * Enable PWM timers, which are present on R-Car and RZ/G1 platforms, as a module * tag 'renesas-defconfig-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: defconfig: Enable PWM ARM: multi_v7_defconfig: Select PWM_RCAR as module ARM: shmobile: defconfig: Enable SGTL5000 audio codec Signed-off-by: Olof Johansson <olof@lixom.net>
2017-12-21ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)Kishon Vijay Abraham I1-0/+6
Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe controller present in dra7 SoCs in both host mode and device mode. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-20ARM: multi_v7_defconfig: Select PWM_RCAR as moduleFabrizio Castro1-0/+1
Enable PWM support for R-Car and friends by default. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-30ARM: multi_v7_defconfig: Enable missing drivers for supported Exynos boardsMarek Szyprowski1-0/+5
Enable following drivers for recently merged devices: - CEC and S5P CEC driver for all Exynos4 and Exynos5 boards with HDMI - Sii9234 DRM HDMI-MHL bridge for Trats2 - dedicated Odroid ASoC machine driver for Odroid XU3/XU4 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-11-07ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as moduleAnup Patel1-0/+1
The RPMSG_VIRTIO is now user selectable option so we explicitly select it in multi_v7_defconfig. Till now RPMSG_VIRTIO was selected by ST_REMOTEPROC=m in multi_v7_defconfig. Signed-off-by: Anup Patel <anup@brainfault.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-30ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIERMasahiro Yamada1-0/+1
Enable the GPIO controller driver used for UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-30Merge tag 'arm-soc/for-4.15/defconfig' of ↵Arnd Bergmann1-0/+1
http://github.com/Broadcom/stblinux into next/soc Pull "Broadcom defconfig changes for 4.15" from Florian Fainelli: This pull request contains Broadcom ARM-based SoCs multi_v7_defconfig file updates for 4.15, please pull the following: - Florian enables the Broadcom Hurricane 2 SoC in multi_v7_defconfig (CONFIG_ARCH_BCM_HR2) * tag 'arm-soc/for-4.15/defconfig' of http://github.com/Broadcom/stblinux: ARM: multi_v7_defconfig: Enable CONFIG_ARCH_BCM_HR2
2017-10-30Merge tag 'amlogic-defconfig' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/soc Pull "Amlogic: defconfig updates for v4.15" from Kevin Hilman: - enable SDIO/MMC controller * tag 'amlogic-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: multi_v7_defconfig: enable the Meson MX SDIO/MMC controller
2017-10-19Merge tag 'samsung-defconfig-4.15' of ↵Arnd Bergmann1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc Pull "Samsung defconfig changes for v4.15" from Krzysztof Kozłowski: 1. Enable USB3503 on multi_v7 for Odroid U3. 2. Enable USB Attached SCSI for Odroid HC1. * tag 'samsung-defconfig-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: multi_v7_defconfig: Enable UAS support for Odroid HC1 board ARM: exynos_defconfig: Enable UAS support for Odroid HC1 board ARM: multi_v7_defconfig: Enable USB3503 driver
2017-10-12ARM: multi_v7_defconfig: Enable CONFIG_ARCH_BCM_HR2Florian Fainelli1-0/+1
Turn on Broadcom Hurrican 2 SoC support by default to get access to its drivers. Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-10-12ARM: multi_v7_defconfig: enable the Meson MX SDIO/MMC controllerMartin Blumenstingl1-0/+1
This enables the new Amlogic Meson MX SDIO/MMC controller driver, which typically connects to the SD card and SDIO wifi module. The driver is enabled as built-in to allow booting from the SD card. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-04ARM: multi_v7_defconfig: Enable UAS support for Odroid HC1 boardMarek Szyprowski1-0/+1
Odroid HC1 board has built-in JMicron USB to SATA bridge, which supports UAS protocol. Enable support for it to make sure that all built-in storage devices are available. Enable it as module to keep in line with multi_v7 policy to enable drivers as build-in only if they are critical for boot process. On Odroid HC1 the kernel itself has to be still read from the SD-card, so assume that modules/initrd is also accessible there. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-09-30ARM: multi_v7_defconfig: Enable USB3503 driverLinus Lüssing1-0/+1
The Odroid U3 (Exynos 4412 based) for instance needs this driver, otherwise its USB hub will not come up. Also selecting it as built-in to allow booting from USB without an initrd/initramfs. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-09-18ARM: multi_v7_defconfig: Enable BQ32000 RTC driverBiju Das1-0/+1
The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000). To increase hardware support enable the driver in the multi_v7_defconfig multiplatform configuration. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-11Merge tag 'armsoc-platforms' of ↵Linus Torvalds1-10/+7
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch contains platform updates for 32- and 64-bit ARM, including defconfig updates to enable new options, drivers and platforms. There are also a few fixes and cleanups for some existing vendors. Some of the things worth highlighting here are: - Enabling new crypt drivers on arm64 defconfig - QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig - Debug support enabled for Renesas r8a7743 - Various config updates for Renesas platforms (sound, USB, other drivers) - Platform support (including SMP) for TI dra762 - OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code" * tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: multi_v7_defconfig: make eSDHC driver built-in arm64: defconfig: enable rockchip graphics MAINTAINERS: Update Cavium ThunderX2 entry ARM: config: aspeed: Add I2C, VUART, LPC Snoop ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G ARM: s3c24xx: Fix NAND ECC mode for mini2440 board ARM: davinci_all_defconfig: enable tinydrm and ST7586 arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl ARM: defconfig: tegra: Enable ChipIdea UDC driver ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig ARM: tegra: Add Tegra I2S interfaces to defconfig ARM: tegra: Update default configuration for v4.13-rc1 MAINTAINERS: update ARM/ZTE entry soc: versatile: remove unnecessary static in realview_soc_probe() ARM: Convert to using %pOF instead of full_name ARM: hisi: Fix typo in comment ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add recently added crypto drivers as modules arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG ...
2017-09-02ARM: multi_v7_defconfig: make eSDHC driver built-inYangbo Lu1-1/+1
Sometimes root file system is deployed on SD card. It's proper to build eSDHC driver into kernel. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-08-18Merge tag 'tegra-for-4.14-arm-defconfig' of ↵Arnd Bergmann1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig Pull "ARM: tegra: Default configuration updates for v4.14-rc1" from Thierry Reding: Enables the ChipIdea UDC driver and selects some symbols that were previously being selected by other drivers but will no longer be in v4.14. * tag 'tegra-for-4.14-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: defconfig: tegra: Enable ChipIdea UDC driver ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig ARM: tegra: Add Tegra I2S interfaces to defconfig ARM: tegra: Update default configuration for v4.13-rc1
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-23 08:38:00 +0300