summaryrefslogtreecommitdiff
path: root/arch/arm/common/gic.c
AgeCommit message (Collapse)AuthorFilesLines
2011-11-02Merge branch 'next/dt' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds1-63/+125
* 'next/dt' of git://git.linaro.org/people/arnd/arm-soc: ARM: gic: use module.h instead of export.h ARM: gic: fix irq_alloc_descs handling for sparse irq ARM: gic: add OF based initialization ARM: gic: add irq_domain support irq: support domains with non-zero hwirq base of/irq: introduce of_irq_init ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support ARM: at91: dt: at91sam9g45 family and board device tree files arm/mx5: add device tree support for imx51 babbage arm/mx5: add device tree support for imx53 boards ARM: msm: Add devicetree support for msm8660-surf msm_serial: Add devicetree support msm_serial: Use relative resources for iomem Fix up conflicts in arch/arm/mach-at91/{at91sam9260.c,at91sam9g45.c}
2011-11-01ARM: gic: use module.h instead of export.hArnd Bergmann1-1/+1
The module.h cleanup series is not merged at this point, so use the older header file for now, to make it build either way. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31ARM: gic: fix irq_alloc_descs handling for sparse irqRob Herring1-4/+11
Commit "ARM: gic: add irq_domain support" (b49b6ff) breaks SPARSE_IRQ on platforms with GIC. When SPARSE_IRQ is enabled, all NR_IRQS or mach_desc->nr_irqs will be allocated by arch_probe_nr_irqs(). This caused irq_alloc_descs to allocate irq_descs after the pre-allocated space. Make irq_alloc_descs search for an exact irq range and assume it has been pre-allocated on failure. For DT probing dynamic allocation is used. DT enabled platforms should set their nr_irqs to NR_IRQ_LEGACY and have all irq_chips allocate their irq_descs with irq_alloc_descs if SPARSE_IRQ is enabled. gic_init irq_start param is changed to be signed with negative meaning do dynamic Linux irq assigment. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2011-10-31ARM: gic: add OF based initializationRob Herring1-0/+61
This adds ARM gic interrupt controller initialization using device tree data. The initialization function is intended to be called by of_irq_init function like this: const static struct of_device_id irq_match[] = { { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, {} }; static void __init init_irqs(void) { of_irq_init(irq_match); } Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-31ARM: gic: add irq_domain supportRob Herring1-62/+56
Convert the gic interrupt controller to use irq domains in preparation for device-tree binding and MULTI_IRQ. This allows for translation between GIC interrupt IDs and Linux irq numbers. The meaning of irq_offset has changed. It now is just the number of skipped GIC interrupt IDs for the controller. It will be 16 for primary GIC and 32 for secondary GICs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-28Merge branch 'devel-stable' of ↵Linus Torvalds1-11/+220
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits) ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET ARM: gic, local timers: use the request_percpu_irq() interface ARM: gic: consolidate PPI handling ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H ARM: mach-s5p64x0: remove mach/memory.h ARM: mach-s3c64xx: remove mach/memory.h ARM: plat-mxc: remove mach/memory.h ARM: mach-prima2: remove mach/memory.h ARM: mach-zynq: remove mach/memory.h ARM: mach-bcmring: remove mach/memory.h ARM: mach-davinci: remove mach/memory.h ARM: mach-pxa: remove mach/memory.h ARM: mach-ixp4xx: remove mach/memory.h ARM: mach-h720x: remove mach/memory.h ARM: mach-vt8500: remove mach/memory.h ARM: mach-s5pc100: remove mach/memory.h ARM: mach-tegra: remove mach/memory.h ARM: plat-tcc: remove mach/memory.h ARM: mach-mmp: remove mach/memory.h ARM: mach-cns3xxx: remove mach/memory.h ... Fix up mostly pretty trivial conflicts in: - arch/arm/Kconfig - arch/arm/include/asm/localtimer.h - arch/arm/kernel/Makefile - arch/arm/mach-shmobile/board-ap4evb.c - arch/arm/mach-u300/core.c - arch/arm/mm/dma-mapping.c - arch/arm/mm/proc-v7.S - arch/arm/plat-omap/Kconfig largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP -> CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and addition of NEED_MACH_MEMORY_H next to HAVE_IDE.
2011-10-26Merge branch 'core-locking-for-linus' of ↵Linus Torvalds1-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) rtmutex: Add missing rcu_read_unlock() in debug_rt_mutex_print_deadlock() lockdep: Comment all warnings lib: atomic64: Change the type of local lock to raw_spinlock_t locking, lib/atomic64: Annotate atomic64_lock::lock as raw locking, x86, iommu: Annotate qi->q_lock as raw locking, x86, iommu: Annotate irq_2_ir_lock as raw locking, x86, iommu: Annotate iommu->register_lock as raw locking, dma, ipu: Annotate bank_lock as raw locking, ARM: Annotate low level hw locks as raw locking, drivers/dca: Annotate dca_lock as raw locking, powerpc: Annotate uic->lock as raw locking, x86: mce: Annotate cmci_discover_lock as raw locking, ACPI: Annotate c3_lock as raw locking, oprofile: Annotate oprofilefs lock as raw locking, video: Annotate vga console lock as raw locking, latencytop: Annotate latency_lock as raw locking, timer_stats: Annotate table_lock as raw locking, rwsem: Annotate inner lock as raw locking, semaphores: Annotate inner lock as raw locking, sched: Annotate thread_group_cputimer as raw ... Fix up conflicts in kernel/posix-cpu-timers.c manually: making cputimer->cputime a raw lock conflicted with the ABBA fix in commit bcd5cff7216f ("cputimer: Cure lock inversion").
2011-10-23Merge branch 'ppi-irq-core-for-rmk' of ↵Russell King1-14/+46
git://github.com/mzyngier/arm-platforms into devel-stable
2011-10-23ARM: gic, local timers: use the request_percpu_irq() interfaceMarc Zyngier1-52/+0
This patch remove the hardcoded link between local timers and PPIs, and convert the PPI users (TWD, MCT and MSM timers) to the new *_percpu_irq interface. Also some collateral cleanup (local_timer_ack() is gone, and the interrupt handler is strictly private to each driver). PPIs are now useable for more than just the local timers. Additional testing by David Brown (msm8250 and msm8660) and Shawn Guo (imx6q). Cc: David Brown <davidb@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Brown <davidb@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-10-23ARM: gic: consolidate PPI handlingMarc Zyngier1-1/+74
PPI handling is a bit of an odd beast. It uses its own low level handling code and is hardwired to the local timers (hence lacking a registration interface). Instead, switch the low handling to the normal SPI handling code. PPIs are handled by the handle_percpu_devid_irq flow. This also allows the removal of some duplicated code. Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Brown <davidb@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-10-17ARM: 7061/1: gic: convert logical CPU numbers into physical numbersWill Deacon1-3/+14
The GIC driver must convert logical CPU numbers passed in from Linux into physical CPU numbers that are understood by the hardware. This patch uses the new cpu_logical_map macro for performing the conversion inside the GIC driver. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-23ARM: gic: Allow gic arch extensions to provide irqchip flagsColin Cross1-0/+1
Tegra can benefit from the IRQCHIP_MASK_ON_SUSPEND flag, allow it to be passed to the gic irq chip. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-and-Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
2011-09-23ARM: gic: Use cpu pm notifiers to save gic stateColin Cross1-0/+187
When the cpu is powered down in a low power mode, the gic cpu interface may be reset, and when the cpu cluster is powered down, the gic distributor may also be reset. This patch uses CPU_PM_ENTER and CPU_PM_EXIT notifiers to save and restore the gic cpu interface registers, and the CPU_CLUSTER_PM_ENTER and CPU_CLUSTER_PM_EXIT notifiers to save and restore the gic distributor registers. Original-author: Gary King <gking@nvidia.com> Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-and-Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
2011-09-13locking, ARM: Annotate low level hw locks as rawThomas Gleixner1-13/+13
Annotate the low level hardware locks which must not be preempted. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-27Merge branch 'next/devel' of ↵Linus Torvalds1-6/+0
ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits) ARM: S5P64X0: External Interrupt Support ARM: EXYNOS4: Enable MFC on Samsung NURI ARM: EXYNOS4: Enable MFC on universal_c210 ARM: S5PV210: Enable MFC on Goni ARM: S5P: Add support for MFC device ARM: EXYNOS4: Add support FIMD on SMDKC210 ARM: EXYNOS4: Add platform device and helper functions for FIMD ARM: EXYNOS4: Add resource definition for FIMD ARM: EXYNOS4: Change devname for FIMD clkdev ARM: SAMSUNG: Add IRQ_I2S0 definition ARM: SAMSUNG: Add platform device for idma ARM: EXYNOS4: Add more registers to be saved and restored for PM ARM: EXYNOS4: Add more register addresses of CMU ARM: EXYNOS4: Add platform device for dwmci driver ARM: EXYNOS4: configure rtc-s3c on NURI ARM: EXYNOS4: configure MAX8903 secondary charger on NURI ARM: EXYNOS4: configure ADC on NURI ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs ... Fix up tons of silly conflicts: - arch/arm/mach-davinci/include/mach/psc.h - arch/arm/mach-exynos4/Kconfig - arch/arm/mach-exynos4/mach-smdkc210.c - arch/arm/mach-exynos4/pm.c - arch/arm/mach-imx/mm-imx1.c - arch/arm/mach-imx/mm-imx21.c - arch/arm/mach-imx/mm-imx25.c - arch/arm/mach-imx/mm-imx27.c - arch/arm/mach-imx/mm-imx31.c - arch/arm/mach-imx/mm-imx35.c - arch/arm/mach-mx5/mm.c - arch/arm/mach-s5pv210/mach-goni.c - arch/arm/mm/Kconfig
2011-07-21ARM: GIC: avoid routing interrupts to offline CPUsRussell King1-3/+3
The irq_set_affinity() method can be called with masks which include offline CPUs. This allows offline CPUs to have interrupts routed to them by writing to /proc/irq/*/smp_affinity after hotplug has taken a CPU offline. Fix this by ensuring that we select a target CPU present in both the required affinity and the online CPU mask. Ensure that we return IRQ_SET_MASK_OK (which happens to be 0) on success to ensure generic code copies the new mask into the irq_data structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-21ARM: CPU hotplug: fix abuse of irqdesc->nodeRussell King1-1/+0
irqdesc's node member is supposed to mark the numa node number for the interrupt. Our use of it is non-standard. Remove this, replacing the functionality with a test of the affinity mask. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-20ARM: GIC: move gic_chip_data structure declaration to headerChanghwan Youn1-6/+0
Since Samsung EXYNOS4210 cannot support register banking in GIC, so needs to update CPU interface base address. The 'gic_chip_data' is used for it, this patch moves gic_chip_data structure declaraton to arch/arm/include/asm/hardware/gic.h to use it. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-05-11ARM: GIC: Convert GIC library to use the IO relaxed operationsSantosh Shilimkar1-24/+30
The GIC register accesses today make use of readl()/writel() which prove to be very expensive when used along with mandatory barriers. This mandatory barriers also introduces an un-necessary and expensive l2x0_sync() operation. On Cortex-A9 MP cores, GIC IO accesses from CPU are direct and doesn't go through L2X0 write buffer. A DSB before writel_relaxed() in gic_raise_softirq() is added to be compliant with the Barrier Litmus document - the mailbox scenario. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com>
2011-05-11ARM: gic: use handle_fasteoi_irq for SPIsWill Deacon1-16/+16
Currently, the gic uses handle_level_irq for handling SPIs (Shared Peripheral Interrupts), requiring active interrupts to be masked at the distributor level during IRQ handling. On a virtualised system, only the CPU interfaces are virtualised in hardware. Accesses to the distributor must be trapped by the hypervisor, adding latency to the critical interrupt path in Linux. This patch modifies the GIC code to use handle_fasteoi_irq for handling interrupts, which only requires us to signal EOI to the CPU interface when handling is complete. Cascaded IRQ handling is also updated to use the chained IRQ enter/exit functions to honour the flow control of the parent chip. Note that commit 846afbd1 ("GIC: Dont disable INT in ack callback") broke cascading interrupts by forgetting to add IRQ masking. This is no longer an issue because the unmask call is now unnecessary. Tested on Versatile Express and Realview EB (1176 w/ cascaded GICs). Tested-and-reviewed-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Tested-and-acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-03-29arm: Fold irq_set_chip/irq_set_handlerThomas Gleixner1-2/+1
Use irq_set_chip_and_handler() instead. Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29arm: Reorder irq_set_ function callsThomas Gleixner1-1/+1
Reorder irq_set_chip() irq_set_chip_data() irq_set_handler() to irq_set_chip() irq_set_handler() irq_set_chip_data() so the next patch can combine irq_set_chip() and irq_set_handler() to irq_set_chip_and_handler(). Automated conversion with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29arm: Cleanup the irq namespaceThomas Gleixner1-7/+7
Convert to the new function names. Automated with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29arm: gic: Use proper accessor functionsThomas Gleixner1-1/+1
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-09ARM: 6777/1: gic: Add hooks for architecture specific extensionsSantosh Shilimkar1-0/+47
Few architectures combine the GIC with an external interrupt controller. On such systems it may be necessary to update both the GIC registers and the external controller's registers to control IRQ behavior. This can be addressed in couple of possible methods. 1. Export common GIC routines along with 'struct irq_chip gic_chip' and allow architectures to have custom function by override. 2. Provide architecture specific function pointer hooks within GIC library and leave platforms to add the necessary code as part of these hooks. First one might be non-intrusive but have few shortcomings like arch needs to have there own custom gic library. Locks used should be common since it caters to same IRQs etc. Maintenance point of view also it leads to multiple file fixes. The second probably is cleaner and portable. It ensures that all the common GIC infrastructure is not touched and also provides archs to address their specific issue. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Colin Cross <ccross@android.com> Tested-by: Colin Cross <ccross@android.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23ARM: irq migration: update GIC migration codeRussell King1-13/+12
This cleans up after the conversion to irq_data. Rename the function to match the method, and remove the now useless lookup of the irq descriptor which is never used. Move the bitmask calculation out of the irq_controller_lock region. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-13ARM: gic: irq_data conversion.Lennert Buytenhek1-33/+33
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
2010-12-14ARM: GIC: move enablement of PPI interrupts to gic.cRussell King1-0/+10
Avoid adding nasty genirq-specific code to local timers to enable PPI interrupts. Instead, provide a gic function to do this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-14ARM: GIC: move gic_data[] initialization into gic_init()Russell King1-24/+24
This avoids writing unnecessarily to gic_data[] from other CPUs, making this a mostly read-only variable. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-14ARM: GIC: consolidate gic_cpu_base_addr to common GIC codeRussell King1-0/+5
Every architecture using the GIC has a gic_cpu_base_addr pointer for GIC 0 for their entry assembly code to use to decode the cause of the current interrupt. Move this into the common GIC code. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-14ARM: GIC: Remove MMIO address from gic_cpu_init, rename to gic_secondary_initRussell King1-1/+6
We don't need to re-pass the base address for the CPU interfaces to the GIC for secondary CPUs, as it will never be different from the boot CPU - and even if it was, we'd overwrite the boot CPU's base address. Get rid of this argument, and rename to gic_secondary_init(). Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-14ARM: GIC: provide a single initialization function for boot CPURussell King1-2/+9
Provide gic_init() which initializes the GIC distributor and current CPU's GIC interface for the boot (or single) CPU. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-06ARM: 6524/1: GIC irq desciptor bug fixChao Xie1-1/+7
gic_set_cpu will directly use irq_desc[]. If CONFIG_SPARSE_IRQ is enabled, there is no irq_desc[]. So we need use irq_to_desc(irq) to get the descriptor for irq. Signed-off-by: Chao Xie <chao.xie@marvell.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6496/1: GIC: Do not try to register more then NR_IRQS interruptsPawel Moll1-15/+17
This change limits number of GIC-originating interrupts to the platform maximum (defined by NR_IRQS) while still initialising all distributor registers. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-12ARM: GIC: don't disable software generated interruptsRussell King1-4/+24
Software generated interrupts (SGI) are used for IPIs by the kernel. While previous revisions of the GIC hardware were specified not to implement enable bits for SGIs, more recent hardware is now permitted to implement these bits in a per-CPU banked register. The priority registers for the PPI and SGIs are also per-CPU banked registers, so ensure that these are also appropriately initialized. Reported-by: Scott Valentine <svalentine@concentris-systems.com> Acked-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-06GIC: Dont disable INT in ack callbackAbhijeet Dharmapurikar1-14/+0
Masking in the ack callback fails to work with handle_percpu_irq and handle_edge_irq. The interrupt stays disabled after the first invocation since percpu and edge irq do not unmask an interrupt after handling it. For handle_level_irq masking in the ack is redundant because ack is always called after mask in the mask_ack function. Masking in the ack function is required only when __do_IRQ was used instead of flow handlers, but using __do_IRQ has been deprecated. Remove the masking of interrupt from the ack callback. Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-06-17ARM: 6150/1: gic: implement set_typeRabin Vincent1-0/+46
Implement set_type() to allow configuration of the trigger type. Cc: Abhijeet Dharmapurikar <adharmap@quicinc.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-19[ARM] 5556/1: Fix the irq_desc.cpu referencesCatalin Marinas1-1/+1
The cpu member of struct irq_desc was recently renamed to node. The patch renames the ARM references to the old member. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-01Merge branch 'linus' into irq/numaIngo Molnar1-2/+2
Conflicts: arch/mips/sibyte/bcm1480/irq.c arch/mips/sibyte/sb1250/irq.c Merge reason: we gathered a few conflicts plus update to latest upstream fixes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-17[ARM] smp: fix cpumask usage in ARM SMP codeRussell King1-2/+2
The ARM SMP code wasn't properly updated for the cpumask changes, which results in smp_timer_broadcast() broadcasting ticks to non-online CPUs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-28irq: change ->set_affinity() to return statusYinghai Lu1-1/+3
according to Ingo, change set_affinity() in irq_chip should return int, because that way we can handle failure cases in a much cleaner way, in the genirq layer. v2: fix two typos [ Impact: extend API ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org LKML-Reference: <49F654E9.4070809@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-13cpumask: make irq_set_affinity() take a const struct cpumaskRusty Russell1-2/+2
Impact: change existing irq_chip API Not much point with gentle transition here: the struct irq_chip's setaffinity method signature needs to change. Fortunately, not widely used code, but hits a few architectures. Note: In irq_select_affinity() I save a temporary in by mangling irq_desc[irq].affinity directly. Ingo, does this break anything? (Folded in fix from KOSAKI Motohiro) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Acked-by: Ingo Molnar <mingo@redhat.com> Cc: ralf@linux-mips.org Cc: grundler@parisc-linux.org Cc: jeremy@xensource.com Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King1-1/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] spelling fixesSimon Arlott1-1/+1
Spelling fixes in arch/arm/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-17[ARM] gic: Fix gic cascade irq handlingRussell King1-11/+9
No need for the cascade irq function to have a "fastcall" annotation. Fix the range checking for valid IRQ numbers - comparing the value returned by the GIC with NR_IRQS is meaningless since we translate the GIC irq number to a Linux IRQ number afterwards. Check the GIC returned IRQ number is within limits first, then add the IRQ offset, and only then compare with NR_IRQS. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-15[ARM] 4108/2: Allow multiple GIC interrupt controllers in a systemCatalin Marinas1-14/+95
The current implementation only assumes one GIC to be present in the system. However, there are platforms with more than one cascaded interrupt controllers (RealView/EB MPCore for example). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] Remove compatibility layer for ARM irqsRussell King1-1/+1
set_irq_chipdata -> set_irq_chip_data get_irq_chipdata -> get_irq_chip_data do_level_IRQ -> handle_level_irq do_edge_IRQ -> handle_edge_irq do_simple_IRQ -> handle_simple_irq irqdesc -> irq_desc irqchip -> irq_chip Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-02[ARM] 3739/1: genirq updates: irq_chip, add and use irq_chip.nameDavid Brownell1-1/+2
Patch from David Brownell ARM genirq cleanups/updates: - Start switching platforms to newer APIs * use "irq_chip" name, not "irqchip" * providing irq_chip.name - Show irq_chip.name in /proc/interrupts, like on x86. This update a bit more than half of the ARM code. The irq_chip.name values were chosen to match docs (if I have them) or be otherwise obvious ("FPGA", "CPLD", or matching the code). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02[ARM] 3686/1: ARM: arm/common: convert irq handlingThomas Gleixner1-2/+16
Patch from Thomas Gleixner From: Thomas Gleixner <tglx@linutronix.de> Convert the files in arch/arm/common to use the generic irq handling functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-30[ARM] 2942/1: Fix the warning in arch/arm/common/gic.cCatalin Marinas1-0/+2
Patch from Catalin Marinas The warning is caused by the gic_set_cpu() function being defined but not used if CONFIG_SMP is not defined. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-23 18:38:57 +0300