summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2019-04-28Merge tag 'sunxi-dt-for-5.2' of ↵Olof Johansson73-954/+565
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner DT changes for 5.2 This PR is pretty significant, but it been mostly about: - Fixing the DTC warnings in most of our DT. We're now down to 2 warnings, from several thousands. - Fixing a good number of minor issues, typos, and so on thanks to the DT validation tools - Describe the MBUS controller and the special DMA RAM mapping on the A13 - Add support for the LRADC on the A83t - Add support for the I2C bus used for the PMIC on the A33 - Start using the DT annotation /omit-if-no-ref/ on our pinctrl nodes * tag 'sunxi-dt-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (65 commits) ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards ARM: dtsi: axp81x: add USB power supply node ARM: dts: sun5i: Reorder pinctrl nodes ARM: dts: sun6i: i7: Remove useless property ARM: dts: sun4i: lime: Fix the USB PHY ID detect GPIO properties ARM: dts: sun4i: protab2: Remove stale pinctrl-names entry ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI ARM: dts: sun8i: v40: bananapi-m2-berry: Sort device node dereferences. ARM: dts: sun5i: Add the MBUS controller dt-bindings: sunxi: Add compatible for OrangePi 3 board ARM: dts: sun8i: a83t: Add I2C2 pinmux setting for PE pins dt-bindings: arm: sunxi: Add Beelink GS1 board ARM: dts: sun8i: tbs-a711: Add support for volume keys input ARM: dts: sunxi: Add R_LRADC support for A83T ARM: dts: sunxi: Improve A33 NAND transfers by using DMA ARM: dts: sun8i: tbs-a711: Enable UART2 (for NEO-6M GPS module) ARM: dts: sunxi: Remove useless pinctrl nodes ARM: dts: sunxi: Remove pinctrl groups setting bias ARM: dts: sunxi: Remove useless address and size cells ARM: dts: sunxi: Conform to DT spec for NAND controller ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'tegra-for-5.2-arm-dt' of ↵Olof Johansson9-115/+46
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.2-rc1 This contains a set of changes to move PLL power supplies to the XUSB pad controller, which is necessary to ensure the proper sequencing during boot. Other patches in this set clean up usage of SPDX license identifiers in device tree files as well as add support for the ACTMON hardware on Tegra30. * tag 'tegra-for-5.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Add ACTMON support on Tegra30 ARM: tegra: venice2: Move PLL power supplies to XUSB pad controller ARM: tegra: nyan: Move PLL power supplies to XUSB pad controller ARM: tegra: jetson-tk1: Move PLL power supplies to XUSB pad controller ARM: tegra: apalis: Move PLL power supplies to XUSB pad controller ARM: tegra: Remove gratuitous parentheses in SPDX license identifier ARM: tegra: Convert to SPDX license tags for Tegra124 Apalis Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/dt-am3-signed' of ↵Olof Johansson36-1782/+1704
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Add am335x pinmux defines and start using them This series of changes adds a new pinmux instance defines for am335x, and a new AM33XX_PADCONF macro. And then the rest of the series updates the dts files to use it. The reasons for doing this is the pinmux configuration has been hard to use and read. And we need to do this for eventually for moving to use values. This change is done one machine at a time, and can be easily reverted as needed in case of unexpected trouble. The old macro is still working, and we're planning to keep it around until we eventually change to use * tag 'omap-for-v5.2/dt-am3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (38 commits) ARM: dts: am335x: wega: Replaced register offsets with defines ARM: dts: am335x: sl50: Replaced register offsets with defines ARM: dts: am335x: shc: Replaced register offsets with defines ARM: dts: am335x: sbc-t335: Replaced register offsets with defines ARM: dts: am335x: sancloud-bbe: Replaced register offsets with defines ARM: dts: am335x: phycore-som: Replaced register offsets with defines ARM: dts: am335x: pepper: Replaced register offsets with defines ARM: dts: am335x: pdu001: Replaced register offsets with defines ARM: dts: am335x: pcm-953: Replaced register offsets with defines ARM: dts: am335x: osd335x-common: Replaced register offsets with defines ARM: dts: am335x: osd3358-sm-red: Replaced register offsets with defines ARM: dts: am335x: nano: Replaced register offsets with defines ARM: dts: am335x: moxa-uc-8100-me-t: Replaced register offsets with defines ARM: dts: am335x: moxa-uc-2101: Replaced register offsets with defines ARM: dts: am335x: moxa-uc-2100-common: Replaced register offsets with defines ARM: dts: am335x: lxm: Replaced register offsets with defines ARM: dts: am335x: igep0033: Replaced register offsets with defines ARM: dts: am335x: icev2: Replaced register offsets with defines ARM: dts: am335x: evmsk: Replaced register offsets with defines ARM: dts: am335x: evm: Replaced register offsets with defines ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'socfpga_dts_updates_for_v5.2' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.2 - Add base support for Agilex platform - Add 'cap-mmc-highspeed' Stratix10 and 32-bit SoCFPGA platform - Increase Stratix10 QSPI support to 100 MHz * tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA arm64: dts: stratix10: increase QSPI max frequency to 100MHz arm64: dts: stratix10: enable MMC highspeed support ARM: dts: socfpga: enable MMC highspeed support Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'ux500-dts-v5.2-armsoc' of ↵Olof Johansson3-11/+89
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt Ux500 DTS changes for the v5.2 kernel cycle. - This adds the MCDE display controller and some displays. - The Lima MALI-400 driver is added to the kernel, so let's add this block to the Ux500 DTS file. * tag 'ux500-dts-v5.2-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: Ux500: Add MCDE and Samsung display ARM: dts: ux500: Add Mali-400 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/dt-ti-sysc-signed' of ↵Olof Johansson11-382/+1013
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omap4 and 5 l4 abe interconnect This series of devicetree changes adds the l4 abe interconnect devices and moves the devices to their right places in the hierarchy similar to what we've already done for most l4 devices earlier. We first add a shared omap4-mcpdm.dtsi to make adding omap4-l4-abe.dtsi easier for the mcpdm changes. And as earlier, in case of unexpected trouble, devices can be probed the old way by moving one device at a time to the old place. This series of changes depends on the ti-sysc driver changes for handling the external optional clocks that the mcpdm relies on, and is based on the related ti-sysc driver changes. Note that this series does not depend on dropping of the leagcy platform data, but I already had those committed along with the ti-sysc driver changes and noticed too late. * tag 'omap-for-v5.2/dt-ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (44 commits) ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap5 ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap4 ARM: dts: Add common mcpdm dts file for omap4 bus: ti-sysc: Add generic enable/disable functions ARM: OMAP2+: Drop mcspi platform data for omap4 ARM: OMAP2+: Drop uart platform data for dra7 ARM: OMAP2+: Drop gpio platform data for dra7 ARM: OMAP2+: Drop i2c platform data for dra7 ARM: OMAP2+: Drop mmc platform data for dra7 ARM: OMAP2+: Drop uart platform data for omap5 ARM: OMAP2+: Drop gpio platform data for omap5 ARM: OMAP2+: Drop i2c platform data for omap5 ARM: OMAP2+: Drop mmc platform data for omap5 ARM: OMAP2+: Drop uart platform data for am33xx and am43xx ARM: OMAP2+: Drop gpio platform data for am33xx and am43xx ARM: OMAP2+: Drop i2c platform data for am33xx and am43xx ARM: OMAP2+: Drop mmc platform data for am330x and am43xx ARM: OMAP2+: Drop uart platform data for omap4 ARM: OMAP2+: Drop gpio platform data for omap4 ARM: OMAP2+: Drop i2c platform data for omap4 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/dt-signed' of ↵Olof Johansson12-12/+122
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omap variants This series of changes configures dra7 pcie x2 lane mode, configures am43xx-epos-evm regulators and keypad wakeup source, and uses standard reset-gpios instead of gpio-reset for n810. We also need to split dra7 dtsi files for properly supporting dra76x and am576 as some of the devices are different such as usb and pruss. * tag 'omap-for-v5.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra7: Separate AM57 dtsi files dt-binding: arm: omap: Add information for AM5748 ARM: dts: omap2420-n810: Use new CODEC reset pin name ARM: dts: am43xx-epos-evm: Add matrix keypad as wakeup source ARM: dts: am43xx-epos-evm: Keep DCDC3 regulator on in suspend to memory ARM: dts: am43xx-epos-evm: Keep DCDC5 and DCDC6 always on ARM: dts: dra7: Add properties to enable PCIe x2 lane mode Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'samsung-dt-5.2' of ↵Olof Johansson18-35/+477
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.2 1. Use proper ADC on Exynos4412. 2. Extend the Exynos5420 Arndale Octa board with: CPU cooling maps, unused regulators, ADC and UHS-I SD card support. Beside that adjust regulators to proper level and add always-on when needed. 3. Extend the Exynos5260: high speed I2C and proper external interrupts. Also fix shared external interrupt line and use better PLL for MMC clocks. 4. Fix audio recording (broken around v5.1) and microphone recording (since v4.14) on Exynos5422 Odroid XU3 boards. 5. Minor cleanups (stdout-path and bootargs). * tag 'samsung-dt-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Remove console argument from bootargs ARM: dts: exynos: Use stdout-path property instead of console in bootargs ARM: dts: exynos: Fix spelling mistake of EXYNOS5420 ARM: dts: exynos: Fix audio (microphone) routing on Odroid XU3 ARM: dts: exynos: Always enable necessary APIO_1V8 and ABB_1V8 regulators on Arndale Octa ARM: dts: exynos: Extend the eMMC node on Arndale Octa ARM: dts: exynos: Add support for UHS-I SD cards on Arndale Octa ARM: dts: exynos: Adjust ldo23 and ldo27 to lower levels on Arndale Octa ARM: dts: exynos: Fix audio routing on Odroid XU3 ARM: dts: exynos: Enable ADC on Arndale Octa ARM: dts: exynos: Fix interrupt for shared EINTs on Exynos5260 ARM: dts: exynos: Add interrupts for dedicated EINTs on Exynos5260 ARM: dts: exynos: Add high speed I2C ports for Exynos5260 ARM: dts: exynos: Use bustop PLL as the source for MMC clocks on Exynos5260 ARM: dts: exynos: Order nodes alphabetically in Arndale Octa ARM: dts: exynos: Add CPU cooling on Arndale Octa ARM: dts: exynos: Add unused PMIC regulators on Arndale Octa board ARM: dts: exynos: Use stdout path property on Arndale Octa board ARM: dts: exynos: Document regulator used by ADC on Odroid U3 ARM: dts: exynos: Use ADC for Exynos4x12 on Exynos4412 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'stm32-dt-for-v5.2-1' of ↵Olof Johansson12-6/+964
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.2, round 1 Highlights: ---------- MPU part: - Add initial support of stm32mp157a-dk1 board: This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Several connections are available on this boards: 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ... - Add initial support of stm32mp157c-dk2 board: This board is a "super-set" of stm32mp157a-dk1. It embeds a STM32MP157c SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Same connections than stm32mp157a-dk1 board are available. Display panel (otm8009a) and Murata wifi/BT combo is added. - Add and enable SD card support (MMCI variant) on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add and enable PMIC support (STPMIC1 chip) on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add and enable IPCC mailbox support on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add sysconfig clock support on stm32mp157c. - Add romem and temperature calibration support on stm32mp157c. - Add SPDIFRX support on stm32mp157c. - Enable CEC on stm32mp157a-dk1/dk2. MCU part: - Add and enable SD card support (MMCI variant) on stm32h743 eval and disco boards. - Add romem and temperature calibration support on stm32f429 (and so stm32f469). - Enable stm32f769 clock driver * tag 'stm32-dt-for-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits) ARM: dts: stm32: enable cec on stm32mp157a-dk1 board ARM: dts: stm32: add cec pins muxing on stm32mp157 ARM: dts: stm32: add ltdc pins muxing on stm32mp157 ARM: dts: stm32: add I2C sleep pins muxing on stm32mp157 ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2 ARM: dts: stm32: Enable STM32F769 clock driver ARM: dts: stm32: add stpmic1 support on stm32mp157a dk1 board ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 board ARM: dts: stm32: add spdfirx pins to stm32mp157c ARM: dts: stm32: add spdifrx support on stm32mp157c ARM: dts: stm32: Add romem and temperature calibration on stm32f429 ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c ARM: dts: stm32: Add clock on stm32mp157c syscfg ARM: dts: stm32: enable IPCC mailbox support on STM32MP157a-dk1 ARM: dts: stm32: enable IPCC mailbox support on STM32MP157c-ed1 ARM: dts: stm32: add IPCC mailbox support on STM32MP157c ARM: dts: stm32: add sdmmc1 support on stm32mp157a dk1 board ARM: dts: stm32: add sdmmc1 support on stm32mp157c ed1 board ARM: dts: stm32: add sdmmc1 support on stm32mp157c ARM: dts: stm32: add sdmmc1 support on stm32h743i disco board ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'aspeed-5.2-devicetree' of ↵Olof Johansson8-5/+117
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.2 - RTC and GFX DRM driver went upstream this cycle - Miscellaneous board updates for Facebook and IBM BMCs * tag 'aspeed-5.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Add RTC node ARM: dts: aspeed: witherspoon: Update BMC partitioning ARM: dts: aspeed: cmm: enable iio-hwmon-adc ARM: dts: aspeed: tiogapass: Enable VUART ARM: dts: aspeed-g5: Add video engine ARM: dts: aspeed: Enable the GFX IP ARM: dts: aspeed-g5: Add resets and clocks to GFX node ARM: dts: aspeed: witherspoon: Enable vhub ARM: dts: aspeed: palmetto: Fix flash_memory region ARM: dts: aspeed: ast2500: Update flash layout Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'v5.2-rockchip-dts32-1' of ↵Olof Johansson10-16/+203
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Quite a bit of love for the rk3288-veyron chromeos devices and a number of cleanups for rk3288 from that area, hdmi support for the old rk3066 a small rv1108-eglin-r1 cleanup and wifi+hdmi-cec for the tinker board. * tag 'v5.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable vop0 and hdmi nodes to rk3066a-mk808 ARM: dts: rockchip: add rk3066 hdmi nodes ARM: dts: rockchip: Add device tree for rk3288-veyron-mighty dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-mighty ARM: dts: rockchip: Add vdd_logic to rk3288-veyron ARM: dts: rockchip: Add dvs-gpios to rk3288-veyron-jerry ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15 dt-bindings: ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15 ARM: dts: rockchip: Fix gic/efuse sort ordering for rk3288 ARM: dts: rockchip: Enable WiFi on rk3288-tinker ARM: dts: rockchip: add grf reference in rk3288 tsadc node ARM: dts: rockchip: Enable HDMI CEC on rk3288-tinker-s ARM: dts: rockchip: remove disable-wp from rv1108-elgin-r1 emmc node Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'amlogic-dt' of ↵Olof Johansson3-0/+62
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.2 - add GPIO line names for odroid-c1 boards - support internal clock measure driver * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroidc1: add the GPIO line names ARM: dts: meson8b: add the internal clock measurer ARM: dts: meson8: add the internal clock measurer Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-18ARM: dts: sun8i: a83t: Enable USB OTG controller on some boardsChen-Yu Tsai2-0/+24
The Bananapi M3 and Cubietruck Plus both have USB OTG ports wired to the SoC and PMIC in the same way, with the N_VBUSEN pin on the PMIC controlling VBUS output, the PMIC's VBUS input for sensing VBUS, and PH11 on the SoC for sensing the ID pin. Enable OTG on both boards. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-18ARM: dtsi: axp81x: add USB power supply nodeQuentin Schulz1-0/+4
The AXP813/818 has a VBUS power input. Add a device node for it, now that we support it. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> [wens@csie.org: Add commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-18ARM: tegra: Add ACTMON support on Tegra30Dmitry Osipenko1-0/+11
Add support for ACTMON on Tegra30. This is used to monitor activity from different components. Based on the collected statistics, the rate at which the external memory needs to be clocked can be derived. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-18ARM: dts: Ux500: Add MCDE and Samsung displayLinus Walleij3-11/+65
This adds and updates the device tree nodes for the MCDE display controller and connects the Samsung display to the TVK1281618 user interface board (UIB) so we get nicely working graphics on this reference design. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-18ARM: dts: ux500: Add Mali-400Linus Walleij1-0/+24
This adds the Mali-400 block, also known as SGA500 or the Smart Graphics Adapter, to the DBx500 DTS file. All resources and bindings are already in place so this just works. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-17ARM: dts: sun5i: Reorder pinctrl nodesMaxime Ripard1-10/+10
We try to keep the PIO nodes ordered alphabetically, but this doesn't always work out. Let's fix it. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-17ARM: dts: sun6i: i7: Remove useless propertyMaxime Ripard1-1/+0
The I7 DTS uses an spdif-out property with an "okay" value. However, that property isn't documented anywhere, and isn't used anywhere either. Remove it. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-17ARM: dts: sun4i: lime: Fix the USB PHY ID detect GPIO propertiesMaxime Ripard1-1/+1
While the USB PHY Device Tree mandates that the name of the ID detect pin should be usb0_id_det-gpios, a significant number of device tree use usb0_id_det-gpio instead. This was functional because the GPIO framework falls back to the gpio suffix that is legacy, but we should fix this. Commit 2c515b0d05a9 ("ARM: sunxi: Fix the USB PHY ID detect GPIO properties") was supposed to fix this, but one fell through the cracks. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-17ARM: dts: sun4i: protab2: Remove stale pinctrl-names entryMaxime Ripard1-1/+0
Some nodes still have pinctrl-names entry, yet they don't have any pinctrl group anymore. Drop them. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-17ARM: tegra: venice2: Move PLL power supplies to XUSB pad controllerThierry Reding1-0/+5
The XUSB pad controller is responsible for supplying power to the PLLs used to drive the various USB, PCI and SATA pads. Move the PLL power supplies from the PCIe and XUSB controllers to the XUSB pad controller to make sure they are available when needed. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17ARM: tegra: nyan: Move PLL power supplies to XUSB pad controllerThierry Reding1-0/+5
The XUSB pad controller is responsible for supplying power to the PLLs used to drive the various USB, PCI and SATA pads. Move the PLL power supplies from the XUSB controller to the XUSB pad controller to make sure they are available when needed. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17ARM: tegra: jetson-tk1: Move PLL power supplies to XUSB pad controllerThierry Reding1-0/+5
The XUSB pad controller is responsible for supplying power to the PLLs used to drive the various USB, PCI and SATA pads. Move the PLL power supplies from the PCIe and XUSB controllers to the XUSB pad controller to make sure they are available when needed. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17ARM: tegra: apalis: Move PLL power supplies to XUSB pad controllerThierry Reding2-0/+12
The XUSB pad controller is responsible for supplying power to the PLLs used to drive the various USB, PCI and SATA pads. Move the PLL power supplies from the PCIe and XUSB controllers to the XUSB pad controller to make sure they are available when needed. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17ARM: tegra: Remove gratuitous parentheses in SPDX license identifierThierry Reding2-2/+2
Parentheses in the SPDX license identifier are only used to group sub- expressions. If there's no need for such grouping, the parentheses can be omitted. Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17ARM: tegra: Convert to SPDX license tags for Tegra124 ApalisIgor Opaniuk3-113/+6
Replace boiler plate licenses texts with the SPDX license identifiers in Colibri/Apalis DTS files. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> [treding@nvidia.com: drop unneeded parentheses, keep license at X11] Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCIMaxime Ripard8-28/+0
Neither the OHCI or EHCI bindings are using the phy-names property, so we can just drop it. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-15ARM: dts: am335x: wega: Replaced register offsets with definesChristina Quast1-34/+34
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: am335x: sl50: Replaced register offsets with definesChristina Quast1-104/+104
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: am335x: shc: Replaced register offsets with definesChristina Quast1-114/+112
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: am335x: sbc-t335: Replaced register offsets with definesChristina Quast1-96/+56
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: am335x: sancloud-bbe: Replaced register offsets with definesChristina Quast1-31/+31
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: am335x: phycore-som: Replaced register offsets with definesChristina Quast1-30/+30
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: am335x: pepper: Replaced register offsets with definesChristina Quast1-100/+100
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: am335x: pdu001: Replaced register offsets with definesChristina Quast1-85/+85
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: am335x: pcm-953: Replaced register offsets with definesChristina Quast1-37/+37
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: am335x: osd335x-common: Replaced register offsets with definesChristina Quast1-2/+2
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: am335x: osd3358-sm-red: Replaced register offsets with definesChristina Quast1-84/+84
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: am335x: nano: Replaced register offsets with definesChristina Quast1-70/+70
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: am335x: moxa-uc-8100-me-t: Replaced register offsets with definesChristina Quast1-58/+58
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: am335x: moxa-uc-2101: Replaced register offsets with definesChristina Quast1-12/+12
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: am335x: moxa-uc-2100-common: Replaced register offsets with definesChristina Quast1-21/+21
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: am335x: lxm: Replaced register offsets with definesChristina Quast1-60/+60
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: am335x: igep0033: Replaced register offsets with definesChristina Quast1-20/+20
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-15ARM: dts: sun8i: v40: bananapi-m2-berry: Sort device node dereferences.Pablo Greco1-18/+18
The device node dereferences are out of order, sort them. Signed-off-by: Pablo Greco <pgreco@centosproject.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-12ARM: dts: dra7: Separate AM57 dtsi filesRoger Quadros9-11/+108
AM5 and DRA7 SoC families have different set of modules in them so the SoC sepecific dtsi files need to be separated. e.g. Some of the major differences between AM576 and DRA76 DRA76x AM576x USB3 x USB4 x ATL x VCP x MLB x ISS x PRU-ICSS1 x PRU-ICSS2 x This patch only deals with disabling USB3, USB4 and ATL for AM57 variants. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12ARM: dts: am335x: icev2: Replaced register offsets with definesChristina Quast1-58/+58
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12ARM: dts: am335x: evmsk: Replaced register offsets with definesChristina Quast1-146/+146
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-12ARM: dts: am335x: evm: Replaced register offsets with definesChristina Quast1-117/+117
The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-19 16:54:03 +0300