summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2013-04-08ARM: dts: Add G2D node to SMDKV310Sachin Kamat1-0/+4
Added G2D DT node to SMDKV310 board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-08ARM: dts: Add G2D node to exynos4210.dtsiSachin Kamat1-0/+7
Added G2D DT node to Exynos4210. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-08Merge commit 'v3.9-rc5' into next/clk-exynosKukjin Kim36-40/+77
Conflicts: arch/arm/boot/dts/exynos4.dtsi arch/arm/boot/dts/exynos5440.dtsi
2013-03-25Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2-2/+2
Pull ARM SoC bug fixes from Arnd Bergmann: "Four patches for arm-soc this week: - Kevin Hilman is no longer reachable under his previous email address. He submitted the patch earlier, but nobody felt responsible to pick it up. - One Tegra fix for an incorect register address in device tree. - IMX multiplatform support exposes a configuration option that leads to unbootable kernels on all other machines and that needs to depend on that platform. - A nontrivial bug fix for the setup of the mxs video output." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: update email address for Kevin Hilman ARM: tegra: fix register address of slink controller ARM: imx: add dependency check for DEBUG_IMX_UART_PORT ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
2013-03-25ARM: dts: add board specific fixed rate clock nodes for Exynos based platformsThomas Abraham10-0/+100
The clock frequency of xxti and xusbxti clocks is dependent on the frequency of the on-board oscillator that is used to generate these clocks. So allow the frequency of these clocks to be specfied from device tree. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-25ARM: dts: add clock provider information for all controllers in Exynos5440 SoCThomas Abraham1-0/+18
For all supported peripheral controllers on Exynos5440, add clock lookup information. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-25ARM: dts: add clock provider information for all controllers in Exynos5250 SoCThomas Abraham1-0/+72
For all supported peripheral controllers on Exynos5250, add clock lookup information. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-25ARM: dts: add clock provider information for all controllers in Exynos4 SoCsThomas Abraham3-0/+54
For all supported peripheral controllers on Exynos4 SoCs, add clock lookup information. Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Tested-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-25ARM: dts: add Exynos4 and Exynos5 clock controller nodesThomas Abraham4-0/+24
Add clock controller nodes for EXYNOS4210, EXYNOS4x12, EXYNOS5250 and EXYNOS5440 SoCs. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-23ARM: tegra: fix register address of slink controllerLaxman Dewangan2-2/+2
Fix typo on register address of slink3 controller where register address is wrongly set as 0x7000d480 but it is 0x7000d800. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-18Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds3-2/+41
Pull ARM SoC bug fixes from Arnd Bergmann: "Things are calming down for arm-soc as well. This set of bug fixes is dominated in size by the at91 platform bug fixes. Some of them were meant to go through the framebuffer tree during the merge window, but since the framebuffer maintainer could not be reached, I offered to take them here. The other notable at91 change is the addition of pinctrl definitions to fix the NAND controller. The rest are mostly simple regression fixes: - Our removal of VIRT_TO_BUS conflicted with Stephen Rothwell's renaming of the Kconfig symbol. You will get a trivial merge conflict here, we still want to remove it. - missing bits for clocks on imx and s5pv210 - missing header inclusions in mmp and shmobile - typos in s5pv210 camera and vt8500 clock support code and three trivial fixes for pre-3.8 bugs: - an old bogus build warning in the joystick driver - a misleading Kconfig description - a NULL pointer check on davinci" * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: fix CONFIG_VIRT_TO_BUS handling ARM: i.MX35: enable MAX clock ARM: Scorpion is a v7 architecture, not v6 ARM: mmp: add platform_device head file in gplugd input/joystick: use get_cycles on ARM [media] s5p-fimc: fix s5pv210 build clk: vt8500: Fix "fix device clock divisor calculations" ARM: i.MX25: Fix DT compilation ARM: at91: fix infinite loop in at91_irq_suspend/resume ARM: at91: add gpio suspend/resume support when using pinctrl ARM: at91: fix LCD-wiring mode atmel_lcdfb: fix 16-bpp modes on older SOCs ARM: at91: dt: at91sam9x5: complete NAND pinctrl ARM: at91: dt: at91sam9x5: correct NAND pins comments ARM: davinci: edma: fix dmaengine induced null pointer dereference on da830 ARM: shmobile: marzen: Include mmc/host.h ARM: EXYNOS: Add #dma-cells for generic dma binding support for PL330 ARM: S5PV210: Fix PL330 DMA controller clkdev entries
2013-03-16Merge tag 'mfd-fixes-3.9-1' of ↵Linus Torvalds4-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes Pull MFD fixes from Samuel Ortiz: "This is the first batch of MFD fixes for 3.9. With this one we have: - An ab8500 build failure fix. - An ab8500 device tree parsing fix. - A fix for twl4030_madc remove routine to work properly (when built-in). - A fix for properly registering palmas interrupt handler. - A fix for omap-usb init routine to actually write into the hostconfig register. - A couple of warning fixes for ab8500-gpadc and tps65912" * tag 'mfd-fixes-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes: mfd: twl4030-madc: Remove __exit_p annotation mfd: ab8500: Kill "reg" property from binding mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDO mfd: wm831x: Don't forward declare enum wm831x_auxadc mfd: twl4030-audio: Fix argument type for twl4030_audio_disable_resource() mfd: tps65912: Declare and use tps65912_irq_exit() mfd: palmas: Provide irq flags through DT/platform data mfd: Make AB8500_CORE select POWER_SUPPLY to fix build error mfd: omap-usb-host: Actually update hostconfig
2013-03-15Merge branch 'v3.9-samsung-fixes-1' of ↵Arnd Bergmann2-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim <kgene.kim@samsung.com>: * 'v3.9-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Add dma-cells for generic dma binding support for PL330 ARM: S5PV210: Fix PL330 DMA controller clkdev entries Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-15Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesArnd Bergmann2-3/+27
From Nicolas Ferre <nicolas.ferre@atmel.com>: Two patches for Device Tree on at91sam9x5/NAND. Two more for fixing PM suspend/resume IRQ on AIC5 and GPIO used with pinctrl. * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91: fix infinite loop in at91_irq_suspend/resume ARM: at91: add gpio suspend/resume support when using pinctrl ARM: at91: dt: at91sam9x5: complete NAND pinctrl ARM: at91: dt: at91sam9x5: correct NAND pins comments Includes an update to -rc2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-13ARM: at91: dt: at91sam9x5: complete NAND pinctrlRichard Genoud1-2/+26
There was only chip enable and readdy/busy pins for the nand controller. This add the rest of the pins. pinctrl_nand_16bits contains the specific muxes for 16 bits NANDs. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-13ARM: at91: dt: at91sam9x5: correct NAND pins commentsRichard Genoud1-2/+2
Comments on NAND pins where inverted. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-12Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds28-30/+29
Pull ARM SoC fixes from Arnd Bergmann: "These bug fixes are for the largest part for mvebu/kirkwood, which saw a few regressions after the clock infrastructure was enabled, and for OMAP, which showed a few more preexisting bugs with the new multiplatform support. Other small fixes are for imx, mxs, tegra, spear and socfpga" * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) ARM: spear3xx: Use correct pl080 header file Arm: socfpga: pl330: Add #dma-cells for generic dma binding support ARM: multiplatform: Sort the max gpio numbers. ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART" ARM: imx: pll1_sys should be an initial on clk arm: mach-orion5x: fix typo in compatible string of a .dts file arm: mvebu: fix address-cells in mpic DT node arm: plat-orion: fix address decoding when > 4GB is used arm: mvebu: Reduce reg-io-width with UARTs ARM: Dove: add RTC device node arm: mvebu: enable the USB ports on Armada 370 Reference Design board ARM: dove: drop "select COMMON_CLK_DOVE" rtc: rtc-mv: Add support for clk to avoid lockups gpio: mvebu: Add clk support to prevent lockup ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency ARM: mxs: cfa10049: Fix fb initialisation function ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: OMAP: RX-51: add missing USB phy binding clk: Tegra: Remove duplicate smp_twd clock ...
2013-03-12mfd: ab8500: Kill "reg" property from bindingArnd Bergmann4-5/+4
The ab8500 device is a child of the prcmu device, which is a memory mapped bus device, whose children are addressable using physical memory addresses, not using mailboxes, so a mailbox number in the ab8500 node cannot be parsed by DT. Nothing uses this number, since it was only introduced as part of the failed attempt to clean up prcmu mailbox handling, and we can simply remove it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-12Arm: socfpga: pl330: Add #dma-cells for generic dma binding supportPadmavathi Venna1-0/+3
This patch adds #dma-cells property to PL330 DMA controller nodes for supporting generic dma dt bindings on SOCFPGA platform. #dma-channels and #dma-requests are not required now but added in advance. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-12Merge tag 'mvebu_fixes_for_v3.9' of ↵Arnd Bergmann22-26/+21
git://git.infradead.org/users/jcooper/linux into fixes mvebu fixes for v3.9 from Jason Cooper <jason@lakedaemon.net>: The first four patches: 89c58c1 rtc: rtc-mv: Add support for clk to avoid lockups de88747 gpio: mvebu: Add clk support to prevent lockup 7bf5b40 ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels 93fff4c ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency are Cc'd to stable since they were held over from the previous merge window. The rest are a small collection of fixes and a couple of devicetree conversion catchups. * tag 'mvebu_fixes_for_v3.9' of git://git.infradead.org/users/jcooper/linux: arm: mach-orion5x: fix typo in compatible string of a .dts file arm: mvebu: fix address-cells in mpic DT node arm: plat-orion: fix address decoding when > 4GB is used arm: mvebu: Reduce reg-io-width with UARTs ARM: Dove: add RTC device node arm: mvebu: enable the USB ports on Armada 370 Reference Design board ARM: dove: drop "select COMMON_CLK_DOVE" rtc: rtc-mv: Add support for clk to avoid lockups gpio: mvebu: Add clk support to prevent lockup ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-09Merge branch 'next/mct-exynos' into next/clk-exynosKukjin Kim4-0/+90
Conflicts: arch/arm/mach-exynos/mach-exynos4-dt.c
2013-03-09ARM: dts: add mct device tree node for all supported Exynos SoC'sThomas Abraham4-0/+90
Add MCT device tree node for Exynos4210, Exynos4212, Exynos4412 and Exynos5250. Cc: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-09arm: mach-orion5x: fix typo in compatible string of a .dts fileThomas Petazzoni1-1/+1
The orion5x-lacie-ethernet-disk-mini-v2.dts file was using "marvell-orion5x-88f5182" as a compatible string, while it should have been "marvell,orion5x-88f5182". Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-09arm: mvebu: fix address-cells in mpic DT nodeThomas Petazzoni1-1/+0
There is no need to have a #address-cells property in the MPIC Device Tree node, and more than that, having it confuses the of_irq_map_raw() logic, which will be used by the Marvell PCIe driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-09arm: mvebu: Reduce reg-io-width with UARTsHeikki Krogerus2-4/+4
Setting the reg-io-width to 1 byte represents more accurate description of the HW. This will fix an issue where UART driver causes kernel panic during bootup. Gregory CLEMENT traced the issue to autoconfig() in 8250.c, where the existence of FIFO is checked from UART_IIR register. The register is now read as 32-bit value as the reg-io-width is set to 4-bytes. The retuned value seems to contain bogus data for bits 31:8, causing the issue. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-09ARM: Dove: add RTC device nodeJean-Francois Moine1-0/+5
The commit: 48be9ac ARM: Dove: split legacy and DT setup removed the RTC initialization. This patch re-enables the RTC via the DT. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-09arm: mvebu: enable the USB ports on Armada 370 Reference Design boardFlorian Fainelli1-0/+8
This patch modifies the Armada 370 Reference Design DTS file to enable support for the two USB ports found on this board. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-09rtc: rtc-mv: Add support for clk to avoid lockupsAndrew Lunn1-0/+1
The Marvell RTC on Kirkwood makes use of the runit clock. Ensure the driver clk_prepare_enable() this clock, otherwise there is a danger the SoC will lockup when accessing RTC registers with the clock disabled. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-09gpio: mvebu: Add clk support to prevent lockupAndrew Lunn1-0/+2
The kirkwood SoC GPIO cores use the runit clock. Add code to clk_prepare_enable() runit, otherwise there is a danger of locking up the SoC by accessing the GPIO registers when runit clock is not ticking. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-09ARM: kirkwood: of_serial: fix clock gating by removing clock-frequencyJason Cooper17-20/+0
When DT support for kirkwood was first introduced, there was no clock infrastructure. As a result, we had to manually pass the clock-frequency to the driver from the device node. Unfortunately, on kirkwood, with minimal config or all module configs, clock-frequency breaks booting because of_serial doesn't consume the gate_clk when clock-frequency is defined. The end result on kirkwood is that runit gets gated, and then the boot fails when the kernel tries to write to the serial port. Fix the issue by removing the clock-frequency parameter from all kirkwood dts files. Booted on dreamplug without earlyprintk and successfully logged in via ttyS0. Reported-by: Simon Baatz <gmbnomis@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-07ARM: dts: Add max77686 device tree support for CROS5250Abhilash Kesavan1-0/+138
The exynos5250 based chromebooks have a max77686 pmic on i2c channel 0. Add support for the pmic in the common cros5250 dts file. Tested after enabling cpufreq support for exynos5250 SoC and varying the arm frequency/voltage using the userspace governer. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Add sdhci node for exynos4412-smdk4412Sachin Kamat1-0/+7
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Set up power domain for MFC and G-scaler for exynos5250Prasanna Kumar1-0/+16
This patch adds device tree nodes for MFC and G-scaler power domains of exynos5250.It binds these power-domain nodes to repsective device tree nodes It also adds support to enable PM generic domains for exynos5250. Signed-off-by: Prasanna Kumar <prasanna.ps@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Enabling ohci-exynos driver for EXYNOS5250Vivek Gautam1-0/+6
Adding OHCI device tree node for Exynos5250 along with the device base address. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Enabling ehci-s5p driver for EXYNOS5250Vivek Gautam3-0/+14
Adding EHCI device tree node for Exynos5250 along with the device base adress and gpio line for vbus. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Add device tree node for DP controller for exynos5250Jingoo Han2-0/+23
Add device tree node for DP controller in EXYNOS5250 and enable the instance for the SMDK5250 board. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Add s5m8767 PMIC node to exynos4412-origen DTSachin Kamat1-0/+330
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Add MSHC node for exynos4412-origen DTSachin Kamat1-0/+20
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Add MFC codec entry to exynos4412-smdk4412 DTSachin Kamat1-0/+6
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Add MFC codec entry to exynos4412-origen DTSachin Kamat1-0/+6
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Add MFC codec support to Origen DTSachin Kamat1-0/+6
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Add MFC codec support to SMDKV310 DTSachin Kamat1-0/+6
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Add MFC codec support for EXYNOS4 DT machinesSachin Kamat1-0/+8
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: enable RTC device node for exynos4412-odroidxDongjin Kim1-0/+4
This patch enables RTC device node defined in exynos4.dtsi for exynos4412-odroidx. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Fix the timing property of MSHC controller for exynos4412-odroidxDongjin Kim1-2/+2
This fixes the property of dw-mshc-sdr-timing and dw-mshc-ddr-timing as per its current binding, it only has two cells. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Add initial board support file for exynos5250-arndaleGirish K S2-0/+123
Arndale is a low cost board based on the Samsung Exynos5250 SoC. This patch adds initial device tree support for this board. Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Girish K S <ks.giri@samsung.com> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: re-organized cpu node for exynos5440Kukjin Kim1-20/+17
This patch adds timer node and re-organizes cpu node for exynos5440. Acked-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: change compatible value for exynos5440 i2cGiridhar Maruthy2-10/+2
This patch removes disabled status from I2C node for exynos5440-ssdk5440, and fixes the incorrect compatible property value of i2c for exynos5440. Signed-off-by: Giridhar Maruthy <giridhar.m@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: remove disabled status from RTC node for exynos5440-ssdk5440Giridhar Maruthy1-4/+0
Signed-off-by: Giridhar Maruthy <giridhar.m@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: remove disabled status from watchdog node for exynos5440-ssdk5440Giridhar Maruthy1-4/+0
Signed-off-by: Giridhar Maruthy <giridhar.m@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-02 04:35:29 +0300