summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2020-02-11ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsiKuninori Morimoto1-1/+1
frame-inversion is "flag" not "uint32". This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-11ARM: dts: sti: Remove deprecated snps PHY properties for stih410-b2260Patrice Chotard1-3/+0
Remove "snps,phy-bus-name", "snps,phy-bus-id" and "snps,phy-addr" properties which are deprecated. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-09Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds19-56/+588
Pull ARM SoC late updates from Olof Johansson: "This is some material that we picked up into our tree late, or that had more complex dependencies on more than one topic branch that makes sense to keep separately. - TI support for secure accelerators and hwrng on OMAP4/5 - TI camera changes for dra7 and am437x and SGX improvement due to better reset control support on am335x, am437x and dra7 - Davinci moves to proper clocksource on DM365, and regulator/audio improvements for DM365 and DM644x eval boards" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits) ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt ARM: dts: Configure interconnect target module for am437x sgx ARM: dts: Configure sgx for dra7 ARM: dts: Configure rstctrl reset for am335x SGX ARM: dts: dra7: Add ti-sysc node for VPE ARM: dts: dra7: add vpe clkctrl node ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries ARM: dts: am43xx: add support for clkout1 clock arm: dts: dra76-evm: Add CAL and OV5640 nodes arm: dtsi: dra76x: Add CAL dtsi node arm: dts: dra72-evm-common: Add entries for the CSI2 cameras ARM: dts: DRA72: Add CAL dtsi node ARM: dts: dra7-l4: Add ti-sysc node for CAM ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only ARM: dts: dra7: add cam clkctrl node ARM: OMAP2+: Drop legacy platform data for omap4 des ARM: OMAP2+: Drop legacy platform data for omap4 sham ARM: OMAP2+: Drop legacy platform data for omap4 aes ...
2020-02-09Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds285-5048/+14444
Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...
2020-02-04Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2-21/+20
Pull ARM updates from Russell King: - decompressor updates - prevention of out-of-bounds access while stacktracing - fix a section mismatch warning with free_memmap() - make kexec depend on MMU to avoid some build errors - remove swapops stubs * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8954/1: NOMMU: remove stubs for swapops ARM: 8952/1: Disable kmemleak on XIP kernels ARM: 8951/1: Fix Kexec compilation issue. ARM: 8949/1: mm: mark free_memmap as __init ARM: 8948/1: Prevent OOB access in stacktrace ARM: 8945/1: decompressor: use CONFIG option instead of cc-option ARM: 8942/1: Revert "8857/1: efi: enable CP15 DMB instructions before cleaning the cache" ARM: 8941/1: decompressor: enable CP15 barrier instructions in v7 cache setup code
2020-02-04Merge tag 'clk-for-linus' of ↵Linus Torvalds3-2/+16
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There are a few changes to the core framework this time around, in addition to the normal collection of driver updates to support new SoCs, fix incorrect data, and convert various drivers to clk_hw based APIs. In the core, we allow clk_ops::init() to return an error code now so that we can fail clk registration if the callback does something like fail to allocate memory. We also add a new "terminate" clk_op so that things done in clk_ops::init() can be undone, e.g. free memory. We also spit out a warning now when critical clks fail to enable and we support changing clk rates and enable/disable state through debugfs when developers compile the kernel themselves. On the driver front, we get support for what seems like a lot of Qualcomm and NXP SoCs given that those vendors dominate the diffstat. There are a couple new drivers for Xilinx and Amlogic SoCs too. The updates are all small things like fixing the way glitch free muxes switch parents, avoiding div-by-zero problems, or fixing data like parent names. See the updates section below for more details. Finally, the "basic" clk types have been converted to support specifying parents with clk_hw pointers. This work includes an overhaul of the fixed-rate clk type to be more modern by using clk_hw APIs. Core: - Let clk_ops::init() return an error code - Add a clk_ops::terminate() callback to undo clk_ops::init() - Warn about critical clks that fail to enable or prepare - Support dangerous debugfs actions on clks with dead code New Drivers: - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Add a driver for BCLK of Freescale SAI cores - Add cam, vpe and sgx clock support for TI dra7 - Add aess clock support for TI omap5 - Enable clks for CPUfreq on Allwinner A64 SoCs - Add Amlogic meson8b DDR clock controller - Add input clocks to Amlogic meson8b controllers - Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2 - i.MX8MP clk driver support Updates: - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs - Detect more PRMCU variants in ux500 driver - Adjust the composite clk type to new way of describing clk parents - Fixes for clk controllers on qcom msm8998 SoCs - Fix gmac main clock for TI dra7 - Move TI dra7-atl clock header to correct location - Fix hidden node name dependency on TI clkctrl clocks - Fix Amlogic meson8b mali clock update using the glitch free mux - Fix Amlogic pll driver division by zero at init - Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config symbols - Switch more i.MX clk drivers to clk_hw based APIs - Disable non-functional divider between pll4_audio_div and pll4_post_div on imx6q - Fix watchdog2 clock name typo in imx7ulp clock driver - Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs - Suppress bind attrs for i.MX8M clock driver - Add a big comment in imx8qxp-lpcg driver to tell why devm_platform_ioremap_resource() shouldn't be used for the driver - A correction on i.MX8MN usb1_ctrl parent clock setting" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits) dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id clk: ls1028a: Fix warning on clamp() usage clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock ...
2020-01-29Merge tag 'usb-5.6-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt/PHY driver updates from Greg KH: "Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1. With the advent of USB4, "Thunderbolt" has really become USB4, so the renaming of the Kconfig option and starting to share subsystem code has begun, hence both subsystems coming in through the same tree here. PHY driver updates also touched USB drivers, so that is coming in through here as well. Major stuff included in here are: - USB 4 initial support added (i.e. Thunderbolt) - musb driver updates - USB gadget driver updates - PHY driver updates - USB PHY driver updates - lots of USB serial stuff fixed up - USB typec updates - USB-IP fixes - lots of other smaller USB driver updates All of these have been in linux-next for a while now (the usb-serial tree is already tested in linux-next on its own before merged into here), with no reported issues" [ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA that causes configuration warnings - Linus ] * tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) Doc: ABI: add usb charger uevent usb: phy: show USB charger type for user usb: cdns3: fix spelling mistake and rework grammar in text usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors USB: serial: cyberjack: fix spelling mistake "To" -> "Too" USB: serial: ir-usb: simplify endpoint check USB: serial: ir-usb: make set_termios synchronous USB: serial: ir-usb: fix IrLAP framing USB: serial: ir-usb: fix link-speed handling USB: serial: ir-usb: add missing endpoint sanity check usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW usb: typec: wcove: fix "op-sink-microwatt" default that was in mW usb: dwc3: pci: add ID for the Intel Comet Lake -V variant usb: typec: tcpci: mask event interrupts when remove driver usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186 usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined usb: chipidea: handle single role for usb role class usb: musb: fix spelling mistake: "periperal" -> "peripheral" phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS USB: usbfs: Always unlink URBs in reverse order ...
2020-01-27ARM: dts: bcm2711: Enable thermalStefan Wahren1-0/+12
This enables thermal for the BCM2711 (used on Raspberry Pi 4) by adding the AVS monitor and a subnode for the thermal part. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1578941778-23321-4-git-send-email-stefan.wahren@i2se.com
2020-01-26Merge tag 'omap-for-v5.6/dt-late-signed' of ↵Olof Johansson24-69/+1084
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late Late omap dts changes for v5.6 merge window This series of changes mostly configures the cameras for dra7 and am437x that have been pending for few months now because of waiting for clock dependencies to clear. So these changes are based on earlier dts changes with with Tero Kristo's for-5.6-ti-clk branch merged in. Then there's a series of changes to configure powervr sgx target module for am335x, am437x and dra7 that have been waiting to have the rstctrl reset driver dependencies to clear. Also included are few minor patches to configure 1-wire and coulomb counter calibration interrupt for droid4. * tag 'omap-for-v5.6/dt-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits) ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt ARM: dts: Configure interconnect target module for am437x sgx ARM: dts: Configure sgx for dra7 ARM: dts: Configure rstctrl reset for am335x SGX ARM: dts: dra7: Add ti-sysc node for VPE ARM: dts: dra7: add vpe clkctrl node ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries ARM: dts: am43xx: add support for clkout1 clock arm: dts: dra76-evm: Add CAL and OV5640 nodes arm: dtsi: dra76x: Add CAL dtsi node arm: dts: dra72-evm-common: Add entries for the CSI2 cameras ARM: dts: DRA72: Add CAL dtsi node ARM: dts: dra7-l4: Add ti-sysc node for CAM ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only ARM: dts: dra7: add cam clkctrl node ARM: dts: Add omap3-echo ARM: dts: Add dtsi files for AM3703, AM3715 and DM3725 ARM: dts: am335x-icev2: Add support for OSD9616P0899-10 at i2c0 ... Link: https://lore.kernel.org/r/pull-1579896427-50330@atomide.com-3 Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-25ARM: 8945/1: decompressor: use CONFIG option instead of cc-optionMasahiro Yamada1-6/+6
The Kconfig stage (arch/Kconfig) has already evaluated whether the compiler supports -fno-stack-protector. You can use CONFIG_CC_HAS_STACKPROTECTOR_NONE instead of invoking the compiler to check the flag here. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-01-25ARM: 8942/1: Revert "8857/1: efi: enable CP15 DMB instructions before ↵Ard Biesheuvel1-15/+1
cleaning the cache" This reverts commit e17b1af96b2afc38e684aa2f1033387e2ed10029, which is no longer necessary now that the v7 specific routines take care not to issue CP15 barrier instructions before they are enabled in SCTLR. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-01-25ARM: 8941/1: decompressor: enable CP15 barrier instructions in v7 cache ↵Ard Biesheuvel1-0/+13
setup code Commit e17b1af96b2afc38e684aa2f1033387e2ed10029 "ARM: 8857/1: efi: enable CP15 DMB instructions before cleaning the cache" added some explicit handling of the CP15BEN bit in the SCTLR system register, to ensure that CP15 barrier instructions are enabled, even if we enter the decompressor via the EFI stub. However, as it turns out, there are other ways in which we may end up using CP15 barrier instructions without them being enabled. I.e., when the decompressor startup code skips the cache_on() initially, we end up calling cache_clean_flush() with the caches and MMU off, in which case the CP15BEN bit in SCTLR may not be programmed either. And in fact, cache_on() itself issues CP15 barrier instructions before actually enabling them by programming the new SCTLR value (and issuing an ISB) Since these routines are shared between v7 CPUs and older ones that implement the CPUID extension as well, using the ordinary v7 barrier instructions in this code is not possible, and so we should enable the CP15 ones explicitly before issuing them. Note that a v7 ISB is still required between programming the SCTLR register and using the CP15 barrier instructions, and we should take care to branch over it if the CP15BEN bit is already set, given that in that case, the CPU may not support it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-01-24Merge tag 'uniphier-dt-v5.6' of ↵Olof Johansson6-5/+20
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt UniPhier ARM SoC DT updates for v5.6 - Add pinmux nodes for I2C ch5, ch6 - Add reset-names to NAND controller node * tag 'uniphier-dt-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: ARM: dts: uniphier: add reset-names to NAND controller node ARM: dts: uniphier: add pinmux nodes for I2C ch5, ch6 Link: https://lore.kernel.org/r/CAK7LNARYrzv4QU-eXxqYCcC9dziJmx9F02YNZ3mMnF47EfL3fA@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-24Merge tag 'omap-for-fixes-whenever-signed' of ↵Olof Johansson2-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few minor fixes for omaps Looks like we have wrong default memory size for beaglebone black, it has at least 512 MB of RAM and not 256 MB. This causes an issue when booted with GRUB2 that does not seem to pass memory info to the kernel. And for am43x-epos-evm the SPI pin directions need to be configured for SPI to work. * tag 'omap-for-fixes-whenever-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1 ARM: dts: am335x-boneblack-common: fix memory size Link: https://lore.kernel.org/r/pull-1579895109-287828@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-23ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmemTony Lindgren1-0/+14
With "[PATCHv3] w1: omap-hdq: Simplify driver with PM runtime autosuspend" we can read the droid4 battery information over 1-wire with this patch with something like: # modprobe omap_hdq # hd /sys/bus/w1/devices/89-*/89-*/nvmem ... Unfortunately the format of the battery data seems to be Motorola specific and is currently unusable for battery charger unless somebody figures out what it means. Note that currently keeping omap_hdq module loaded will cause extra power consumption as it seems to scan devices periodically. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: motorola-cpcap-mapphone: Configure calibration interruptTony Lindgren1-2/+3
We added coulomb counter calibration support With commit 0cb90f071f73 ("power: supply: cpcap-battery: Add basic coulomb counter calibrate support"), but we also need to configure the related interrupt. Without the interrupt calibration happens based on a timeout after two seconds, with the interrupt the calibration just gets done a bit faster. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: Configure interconnect target module for am437x sgxTony Lindgren1-0/+20
This seems to be similar to what we have for am335x. The following can be tested via sysfs with the to ensure the SGX module gets enabled and disabled properly: # echo on > /sys/bus/platform/devices/5600fe00.target-module/power/control # rwmem 0x5600fe00 # revision register 0x5600fe00 = 0x40000000 # echo auto > /sys/bus/platform/devices/5600fe00.target-module/power/control # rwmem 0x5000fe00 Bus error Note that this patch depends on the PRM rstctrl driver that has been recently posted. If the child device driver(s) need to prevent rstctrl reset on PM runtime suspend, the drivers need to increase the usecount for the shared rstctrl reset that can be mapped also for the child device(s) or accessed via dev->parent. Cc: Adam Ford <aford173@gmail.com> Cc: Filip Matijević <filip.matijevic.pz@gmail.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: moaz korena <moaz@korena.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: Philipp Rossak <embed3d@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: Configure sgx for dra7Tony Lindgren1-0/+18
I've tested that the interconnect target module enables and idles just fine when probed with ti-sysc with PM runtime control via sys: # echo on > $(find /sys -name control | grep \/5600) # rwmem 0x5600fe00 # OCP Revision 0x5600fe00 = 0x40000000 # echo auto > $(find /sys -name control | grep \/5600) Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Robert Nelson <robertcnelson@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: Configure rstctrl reset for am335x SGXTony Lindgren1-0/+25
The following can be tested via sysfs with the following to ensure the SGX module gets enabled and disabled properly: # echo on > /sys/bus/platform/devices/5600fe00.target-module/power/control # rwmem 0x5600fe00 # revision register 0x5600fe00 = 0x40000000 # echo auto > /sys/bus/platform/devices/5600fe00.target-module/power/control # rwmem 0x5000fe00 Bus error Note that this patch depends on the PRM rstctrl driver that has been recently posted. If the child device driver(s) need to prevent rstctrl reset on PM runtime suspend, the drivers need to increase the usecount for the shared rstctrl reset that can be mapped also for the child device(s) or accessed via dev->parent. Cc: Adam Ford <aford173@gmail.com> Cc: Filip Matijević <filip.matijevic.pz@gmail.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: moaz korena <moaz@korena.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: Philipp Rossak <embed3d@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23Merge branch 'omap-for-v5.6/ti-sysc-dt-cam' into omap-for-v5.6/dtTony Lindgren10-15/+360
2020-01-23ARM: dts: dra7: Add ti-sysc node for VPEBenoit Parrot1-3/+25
Add VPE node as a child of l4 interconnect in order for it to probe using ti-sysc. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: dra7: add vpe clkctrl nodeBenoit Parrot1-2/+16
Add clkctrl nodes for VPE module. Note that because of the current dts node name dependency for mapping to clock domain, we must still use "vpe-clkctrl@" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entriesBenoit Parrot1-1/+22
Add VPFE device nodes entries. Add OmniVision OV2659 sensor device nodes and linkage. Since Rev1.2a on this board the sensor source clock (xvclk) has a dedicated 12Mhz oscillator instead of using clkout1. Add 'audio_mstrclk' fixed clock object to represent it. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entriesBenoit Parrot1-1/+26
Add VPFE device nodes entries. Add OmniVision OV2659 sensor device nodes and linkage. The sensor clock (xvclk) is sourced from clkout1. Add clock entries to properly select clkout1 and set its parent clock to sys_clkin_ck. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: am43xx: add support for clkout1 clockTero Kristo1-0/+54
clkout1 clock node and its generation tree was missing. Add this based on the data on TRM and PRCM functional spec. commit 664ae1ab2536 ("ARM: dts: am43xx: add clkctrl nodes") effectively reverted this commit 8010f13a40d3 ("ARM: dts: am43xx: add support for clkout1 clock") which is needed for the ov2659 camera sensor clock definition hence it is being re-applied here. Note that because of the current dts node name dependency for mapping to clock domain, we must still use "clkout1-*ck" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes. Fixes: 664ae1ab2536 ("ARM: dts: am43xx: add clkctrl nodes") Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Benoit Parrot <bparrot@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23arm: dts: dra76-evm: Add CAL and OV5640 nodesBenoit Parrot1-0/+35
Add device nodes for CSI2 camera board OV5640. Add the CAL port nodes with the necessary linkage to the ov5640 nodes. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23arm: dtsi: dra76x: Add CAL dtsi nodeBenoit Parrot1-0/+42
Add the required dtsi node to support the Camera Adaptation Layer (CAL) for the DRA76 family of devices. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23arm: dts: dra72-evm-common: Add entries for the CSI2 camerasBenoit Parrot1-0/+31
Add device nodes for CSI2 camera board OV5640. Add the CAL port nodes with the necessary linkage to the ov5640 nodes. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: DRA72: Add CAL dtsi nodeBenoit Parrot1-0/+42
This patch adds the required dtsi node to support the Camera Adaptation Layer (CAL) for the DRA72 family of devices. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: dra7-l4: Add ti-sysc node for CAMBenoit Parrot1-6/+37
Add CAM nodes as a child of l4 interconnect in order for it to probe using ti-sysc. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: dra7: add cam clkctrl nodeBenoit Parrot1-0/+14
Add clkctrl nodes for CAM domain. Note that because of the current dts node name dependency for mapping to clock domain, we must still use "cam-clkctrl@" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23Merge branch 'omap-for-v5.6/ti-sysc-omap45-rng' into ↵Tony Lindgren9-43/+180
omap-for-v5.6/ti-sysc-drop-pdata
2020-01-23ARM: OMAP2+: Drop legacy platform data for omap4 desTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: OMAP2+: Drop legacy platform data for omap4 shamTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: OMAP2+: Drop legacy platform data for omap4 aesTony Lindgren1-2/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: Configure interconnect target module for omap4 desTony Lindgren2-9/+30
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: Configure interconnect target module for omap4 aesTony Lindgren1-12/+54
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: Configure interconnect target module for omap4 shamTony Lindgren1-6/+26
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: Configure omap5 rng to probe with ti-syscTony Lindgren1-3/+17
This is similar to dra7 and omap4 with different clock naming and module address. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: Configure omap4 rng to probe with ti-syscTony Lindgren2-3/+22
Add RNG interconnect data for omap4 similar to what dra7 has. The clock is OMAP4_CM_L4SEC_RNG_CLKCTRL_OFFSET at offset address 0x01c0, which matches what dra7 also has with DRA7_L4SEC_CLKCTRL_INDEX(0x1c0). Note that we need to also add the related l4_secure clock entries. I've only added RNG, the others can be added as they get tested. They are probably very similar to what we already have for dra7 in dra7_l4sec_clkctrl_regs[]. With the clock tagged CLKF_SOC_NONSEC, clock is set disabled for secure devices and clk_get() will fail. Additionally we disable the RNG target module on droid4 to avoid introducing new boot time warnings. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: Add missing omap5 secure clocksTony Lindgren1-2/+8
The secure clocks on omap5 are similar to what we already have for dra7 with dra7_l4sec_clkctrl_regs and documented in the omap5432 TRM in "Table 3-1044. CORE_CM_CORE Registers Mapping Summary". The secure clocks are part of the l4per clock manager. As the l4per clock manager has now two clock domains as children, let's also update the l4per clockdomain node name to follow the "clock" node naming with a domain specific compatible property. Compared to omap4, omap5 has more clocks working in hardare autogating mode. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: Add missing omap4 secure clocksTony Lindgren1-3/+8
The secure clocks on omap4 are similar to what we already have for dra7 in dra7_l4sec_clkctrl_regs and documented in the omap4460 TRM "Table 3-1346 L4PER_CM2 Registers Mapping Summary". The secure clocks are part of the l4_per clock manager. As the l4_per clock manager has now two clock domains as children, let's also update the l4_per clockdomain node name to follow the "clock" node naming with a domain specific compatible property. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1Raag Jadav1-0/+2
Set d0 and d1 pin directions for spi0 and spi1 as per their pinmux. Signed-off-by: Raag Jadav <raagjadav@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-22Merge tag 'zynq-dt-for-v5.6-v2' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson1-0/+135
arm/dt ARM: dts: zynq: DT changes for v5.6 v2 - Enable coresight topology for Zynq * tag 'zynq-dt-for-v5.6-v2' of https://github.com/Xilinx/linux-xlnx: ARM: dts: zynq: enablement of coresight topology Link: https://lore.kernel.org/r/5db334df-89b5-1d07-3884-93f77b0f4e60@monstr.eu Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-21Merge 5.5-rc7 into usb-nextGreg Kroah-Hartman19-831/+65
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-20clk: ti: add clkctrl data dra7 sgxTony Lindgren1-0/+14
This is similar to what we have for omap5 except the gpu_cm address is different, the mux clocks have one more source option, and there's no divider clock. Note that because of the current dts node name dependency for mapping to clock domain, we must still use "gpu-clkctrl@" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes. For accessing the GPU, we also need to configure the interconnect target module for GPU similar to what we have for omap5, I'll send that change separately. Cc: Benoit Parrot <bparrot@ti.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Robert Nelson <robertcnelson@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-20dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clockPeter Ujfalusi2-2/+2
Most of the clock related dt-binding header files are located in dt-bindings/clock folder. It would be good to keep all the similar header files at a single location. Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-20Merge tag 'aspeed-5.6-devicetree' of ↵Olof Johansson13-64/+60
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.6 - Cleanups for dtc warnings - Ethernet hardware checksum cleanups. A bug in the driver was fixed so machines don't need to specify this anymore. - Misc improvements * tag 'aspeed-5.6-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version ARM: dts: aspeed: Add SD card for Vesnin ARM: dts: aspeed: yamp: Delete no-hw-checksum ARM: dts: aspeed: netbmc: Delete no-hw-checksum ARM: dts: aspeed: AST2400 disables hw checksum ARM: dts: ibm-power9-dual: Add a unit address for OCC nodes ARM: dts: aspeed-g6: Cleanup watchdog unit address ARM: dts: aspeed-g5: Sort LPC child nodes by unit address ARM: dts: aspeed: Add reg hints to syscon children ARM: dts: aspeed: Cleanup lpc-ctrl and snoop regs ARM: dts: witherspoon: Cleanup gpio-keys-polled properties ARM: dts: swift: Cleanup gpio-keys-polled properties ARM: dts: fp5280g2: Cleanup gpio-keys-polled properties ARM: dts: vesnin: Add unit address for memory node ARM: dts: aspeed-g5: Use recommended generic node name for SDMC ARM: dts: aspeed-g5: Move EDAC node to APB dt-bindings: misc: Document reg for aspeed, p2a-ctrl nodes dt-bindings: pinctrl: aspeed: Add reg property as a hint Link: https://lore.kernel.org/r/CACPK8XepSy6D4CNWjSWDDK0p7Dx_rneWne4t4uyy=di5nx3zmA@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-20Merge tag 'at91-5.6-dt-2' of ↵Olof Johansson3-0/+1340
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.6 #2 - Add sam9x60 dtsi - New board sam9x60 Evaluation Kit * tag 'at91-5.6-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9x60: add device tree for soc and board dt-bindings: arm: add sam9x60-ek board dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr dt-bindings: atmel-smc: add microchip,sam9x60-smc dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc dt-bindings: atmel-nand: add microchip,sam9x60-pmecc dt-bindings: atmel-matrix: add microchip,sam9x60-matrix dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc dt-bindings: atmel-isi: add microchip,sam9x60-isi dt-bindings: atmel-can: add microchip,sam9x60-can dt-bindings: at_xdmac: add microchip,sam9x60-dma dt-bindings: at_xdmac: remove wildcard Link: https://lore.kernel.org/r/20200119234707.GA90094@piout.net Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-20Merge tag 'v5.6-rockchip-dts32-2' of ↵Olof Johansson10-20/+23
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Removal of the simple-panel compatible and some minor additional cleanups. * tag 'v5.6-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: add reg property to brcmf sub node for rk3188-bqedison2qc Link: https://lore.kernel.org/r/3473489.DgqFdXXe5V@phil Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-02 07:51:54 +0300