summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2019-06-25Merge tag 'renesas-arm-dt-for-v5.3' of ↵Olof Johansson26-35/+589
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM Based SoC DT Updates for v5.3 * Renesas SoC based boards - Use ip=on for bootargs * Renesas R-Car Gen 2 SOC based boards - Configure PMIC IRQ pinmux * R-Car V2H (r8a7792) SoC - Describe CMT devices in DT * RZ/G1C (r8a77470) based iWave SBC (iwg23s-sbc) and RZ/G1N (r8a7744) based boards: - Correct SDHI2 VccQ regulator to fix SDR50 mode * RZ/A2M (r7s9210) based rza2mevb EVB RZ/A1H (r7s72100) based rskrza1 board - Describe input switch in DT * RZ/A2M (r7s9210) based rza2mevb EVB - Sort nodes to ease future maintenance - Add USB host, Ethernet and SDHI support * RZ/A2M (r7s9210) and RZ/A1H (r7s72100) SoCs - Describe IRQC device in DT * tag 'renesas-arm-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (22 commits) ARM: dts: r8a7792: Add CMT0 and CMT1 to r8a7792 ARM: dts: iwg23s-sbc: Fix SDHI2 VccQ regulator ARM: dts: iwg20d-q7-common: Fix SDHI1 VccQ regularor ARM: dts: rza2mevb: Add input switch ARM: dts: r7s9210: Add IRQC device node ARM: dts: rza2mevb: sort nodes of rza2mevb board ARM: dts: renesas: Use ip=on for bootargs ARM: dts: rza2mevb: Add USB Host support ARM: dts: r7s9210: Add USB Device support ARM: dts: r7s9210: Add USB Host support ARM: dts: rskrza1: Add input switches ARM: dts: r7s72100: Add IRQC device node ARM: dts: r8a779x: Configure PMIC IRQ pinmux ARM: dts: rza2mevb: Add 48MHz USB clock ARM: dts: r7s9210: Add USB clock ARM: dts: rza2mevb: add ethernet aliases ARM: dts: rza2mevb: Add SDHI support ARM: dts: rza2mevb: Add Ethernet support ARM: dts: r7s9210: Add SDHI support ARM: dts: r7s9210: Add RIIC support ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'sunxi-h3-h5-for-5.3-201906210812' of ↵Olof Johansson4-8/+4
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt This time we only have a single patch for our command branch between arm and arm64, a fix for the array syntax raised by our DT schemas. * tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sunxi: h3/h5: Fix GPIO regulator state array Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'sunxi-dt-for-5.3-201906210807' of ↵Olof Johansson11-17/+204
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of patches: - Some work on the BPi M2-Berry to support various devices - Convert some bindings to a schema, and a lot of fixes reported by the schemas we introduced. - A few other fixes here and there * tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits) dt-bindings: pwm: Convert Allwinner PWM to a schema ARM: dts: sun8i: r40: Change the RTC compatible ARM: dts: sun8i: v3s: Add external crystals accuracy ARM: dts: sun8i: v3s: Fix the RTC node ARM: dts: sun6i: Add external crystals accuracy ARM: dts: sun6i: Fix RTC node ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface) ARM: dts: gr8-evb: Fix RTC vendor ARM: dts: sun7i: icnova-swac: Fix the model vendor ARM: dts: sun8i: a711: Change LRADC node names to avoid warnings ARM: dts: sun7i: olimex-lime2: Enable ac and power supplies ARM: dts: sun6i: Add default address and size cells for SPI ARM: dts: sun8i-h3: Fix wifi in Beelink X2 DT dt-bindings: bus: Convert Allwinner RSB to a schema ARM: dts: sun8i: r40: bananapi-m2-ultra: Remove regulator-always-on ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'amlogic-dt' of ↵Olof Johansson11-345/+223
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.3 - SPDX updates - switch to generic ethernet PHY reset bindings - add the canvas module - mxiii-plus board: add regulators * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: switch to the generic Ethernet PHY reset bindings ARM: dts: meson8b: update with SPDX Licence identifier ARM: dts: meson8b-odroidc1: update with SPDX Licence identifier ARM: dts: meson8b-mxq: update with SPDX Licence identifier ARM: dts: meson8: update with SPDX Licence identifier ARM: dts: meson8-minix-neo-x8: update with SPDX Licence identifier ARM: dts: meson6: update with SPDX Licence identifier ARM: dts: meson6-atv1200: update with SPDX Licence identifier ARM: dts: meson: update with SPDX Licence identifier ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805 ARM: dts: meson8m2: mxiii-plus: add the supply for the Mali GPU ARM: dts: meson8m2: mxiii-plus: rename the DCDC2 regulator ARM: dts: meson8b: add the canvas module ARM: dts: meson8m2: update the offset of the canvas module ARM: dts: meson8: add the canvas module Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'davinci-for-v5.3/dt' of ↵Olof Johansson4-0/+129
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/dt This pull request adds CPUFreq support for DA850 boards in device-tree boot using the generic CPUFREQ_DT driver. * tag 'davinci-for-v5.3/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci_all_defconfig: Enable CPUFREQ_DT ARM: dts: da850-evm: enable cpufreq ARM: dts: da850-lcdk: enable cpufreq ARM: dts: da850-lego-ev3: enable cpufreq ARM: dts: da850: add cpu node and operating points to DT Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'aspeed-5.3-devicetree' of ↵Olof Johansson17-13/+3417
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.3 We have various device tree updates from the OpenBMC project to enable bits and pieces in existing systems, notably updates to Google's Zaius. There are some AST2500 machines under development: * Lenovo Hr630 * IBM Swift * Facebook YAMP And some AST2400 machines that have been around but out of tree and have now joined the party: * YADRO VESNIN * Microsoft Olympus * tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Enable video engine on romulus and wtherspoon ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine ARM: dts: aspeed: Add YADRO VESNIN BMC ARM: dts: aspeed: Add Microsoft Olympus BMC ARM: dts: aspeed: Adding Lenovo Hr630 BMC ARM: dts: aspeed: Add Facebook YAMP BMC ARM: dts: aspeed: swift: Add pca9539 devices ARM: dts: aspeed: Add Swift BMC machine ARM: dts: aspeed: cmm: enable ehci host controllers ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots ARM: dts: aspeed: zaius: update 12V brick I2C address ARM: dts: aspeed: zaius: add Infineon and Intersil regulators ARM: dts: aspeed: quanta-q71: Enable p2a node ARM: dts: aspeed: Add aspeed-p2a-ctrl node ARM: dts: aspeed: Add Power9 and Power9 CFAM description ARM: dts: aspeed: Rename flash-controller nodes Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'qcom-dts-for-5.3' of ↵Olof Johansson3-5/+293
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm Device Tree Changes for v5.3 * Add display support to MSM8974 * Add display, backlight, and touchscreen support to MSM8974 Hammerhead * Update coresight bindings for MSM8974 and APQ8064 * tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: msm8974-hammerhead: add support for display ARM: dts: msm8974: add display support ARM: dts: qcom: msm8974-hammerhead: add support for backlight ARM: dts: qcom: msm8974-hammerhead: add touchscreen support ARM: dts: qcom-msm8974: Update coresight DT bindings ARM: dts: qcom-apq8064: Update coresight DT bindings Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi ↵Olof Johansson1-9/+9
into arm/dt ARM: DT: Hisilicon ARM32 SoCs updates for v5.3 - Updated CoreSight funnel and replicator using new bindings to fix warning for the hip04. * tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi: ARM: dts: hip04: Update coresight DT bindings Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'arm-soc/for-5.3/devicetree-v2' of ↵Olof Johansson64-152/+104
https://github.com/Broadcom/stblinux into arm/dt This pull request contain Broadcom ARM-based SoCs Device Tree changes for 5.3 please pull the following: - Lukas enables DMA support for the BCM2835 (Raspberry Pi) SPI controller - Florian fixes a number of dtc W=1 warnings in the Broadcom DTS files and provides a fix for devices failing to boot after the removal of skelton.dtsi (that commit has been submitted as a separate fix) * tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux: ARM: dts: BCM5301X: Fix most DTC W=1 warnings ARM: dts: NSP: Fix the bulk of W=1 DTC warnings ARM: dts: BCM63xx: Fix DTC W=1 warnings ARM: dts: BCM53573: Fix DTC W=1 warnings ARM: dts: bcm-mobile: Fix most DTC W=1 warnings ARM: dts: Cygnus: Fix most DTC W=1 warnings ARM: dts: Fix BCM7445 DTC warnings ARM: bcm283x: Enable DMA support for SPI controller ARM: dts: bcm: Add missing device_type = "memory" property Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-23ARM: dts: BCM5301X: Fix most DTC W=1 warningsFlorian Fainelli28-84/+30
Fix the bulk of the unit_address_vs_reg warnings and unnecessary \#address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-06-23ARM: dts: NSP: Fix the bulk of W=1 DTC warningsFlorian Fainelli9-14/+11
Fix the bulk of the unit_address_vs_reg warnings and unnecessary \#address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-06-23ARM: dts: BCM63xx: Fix DTC W=1 warningsFlorian Fainelli2-7/+4
Fix the bulk of the unit_address_vs_reg warnings and unnecessary \#address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-06-23ARM: dts: BCM53573: Fix DTC W=1 warningsFlorian Fainelli5-13/+5
Fix the the unit_address_vs_reg warnings and unnecessary \#address-cells/#size-cells without "ranges" or child "reg" property warnings. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-06-23ARM: dts: bcm-mobile: Fix most DTC W=1 warningsFlorian Fainelli6-18/+18
Fix the bulk of the unit_address_vs_reg warnings and unnecessary \#address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-06-23ARM: dts: Cygnus: Fix most DTC W=1 warningsFlorian Fainelli3-11/+9
Fix the bulk of the unit_address_vs_reg warnings and unnecessary \#address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-06-23ARM: dts: Fix BCM7445 DTC warningsFlorian Fainelli2-5/+5
Fixes a number of unit_address_vs_reg warnings: DTC arch/arm/boot/dts/bcm7445-bcm97445svmb.dtb arch/arm/boot/dts/bcm7445.dtsi:66.6-225.4: Warning (unit_address_vs_reg): /rdb: node has a reg or ranges property, but no unit name arch/arm/boot/dts/bcm7445.dtsi:227.21-298.4: Warning (unit_address_vs_reg): /memory_controllers: node has a reg or ranges property, but no unit name arch/arm/boot/dts/bcm7445-bcm97445svmb.dts:9.9-14.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name arch/arm/boot/dts/bcm7445.dtsi:255.10-275.5: Warning (simple_bus_reg): /memory_controllers/memc@1: simple-bus unit address format error, expected "80000" arch/arm/boot/dts/bcm7445.dtsi:277.10-297.5: Warning (simple_bus_reg): /memory_controllers/memc@2: simple-bus unit address format error, expected "100000" Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-06-23ARM: bcm283x: Enable DMA support for SPI controllerLukas Wunner1-0/+2
Without this, the driver for the BCM2835 SPI controller uses interrupt mode instead of DMA mode, incurring a significant performance penalty. The Foundation's device tree has had these attributes for years, but for some reason they were never upstreamed. They were originally contributed by Noralf Trønnes and Martin Sperl: https://github.com/raspberrypi/linux/commit/25f3e064afc8 https://github.com/raspberrypi/linux/commit/e0edb52b47e6 The DREQ numbers 6 and 7 are documented in section 4.2.1.3 of: https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Noralf Trønnes <noralf@tronnes.org>
2019-06-21ARM: dts: r8a7792: Add CMT0 and CMT1 to r8a7792Magnus Damm1-0/+34
Add CMT0 and CMT1 to the R-Car Gen2 V2H (r8a7792) SoC. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-21ARM: dts: iwg23s-sbc: Fix SDHI2 VccQ regulatorFabrizio Castro1-1/+1
SDR50 isn't working anymore because the GPIO regulator driver is using descriptors since commit d6cd33ad7102 ("regulator: gpio: Convert to use descriptors") which in turn causes the system to use the polarity of the GPIOs (as specified in the DT) for selecting the states, but the polarity specified in the DT is wrong. This patch fixes the regulator DT definition, and that fixes SDR50. Fixes: 9eb36b945b5c ("ARM: dts: iwg23s-sbc: Add uSD and eMMC support") Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-21ARM: dts: iwg20d-q7-common: Fix SDHI1 VccQ regularorFabrizio Castro1-1/+1
SDR50 isn't working anymore because the GPIO regulator driver is using descriptors since commit d6cd33ad7102 ("regulator: gpio: Convert to use descriptors") which in turn causes the system to use the polarity of the GPIOs (as specified in the DT) for selecting the states, but the polarity specified in the DT is wrong. This patch fixes the regulator DT definition, and that fixes SDR50. Fixes: 029efb3a03c5 ("ARM: dts: iwg20d-q7: Add SDHI1 support") Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-21ARM: dts: rza2mevb: Add input switchChris Brandt1-0/+20
Add support for input switch SW3 on the Renesas RZ/A2M EVB development board. Note that this uses the IRQ interrupt, as the RZ/A2 GPIO controller does not include interrupt support Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-21ARM: dts: r7s9210: Add IRQC device nodeChris Brandt1-0/+19
Enable support for the IRQC on RZ/A2M, which is a small front-end to the GIC. This allows to use up to 8 external interrupts with configurable sense select. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-21ARM: dts: rza2mevb: sort nodes of rza2mevb boardYoshihiro Kaneko1-52/+52
This patch sorts the nodes of arch/arm/boot/dts/r7s9210-rza2mevb.dts. * Sort subnodes of root ("/") node alphabetically * Sort following top-level nodes alphabetically * Sort subnodes of pinctrl alphabetically Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> [simon: rebase and sort new ehci nodes] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-21ARM: dts: renesas: Use ip=on for bootargsMagnus Damm20-20/+20
Convert bootargs from ip=dhcp to ip=on Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-20ARM: dts: meson: switch to the generic Ethernet PHY reset bindingsMartin Blumenstingl4-16/+19
The snps,reset-gpio bindings are deprecated in favour of the generic "Ethernet PHY reset" bindings. Replace snps,reset-gpio from the &ethmac node with reset-gpios in the ethernet-phy node. The old snps,reset-active-low property is now encoded directly as GPIO flag inside the reset-gpios property. snps,reset-delays-us is converted to reset-assert-us and reset-deassert-us. reset-assert-us is the second cell from snps,reset-delays-us while reset-deassert-us was the third cell. Instead of blindly copying the old values (which seems strange since they gave the PHY one second to come out of reset) over this also updates the delays based on the datasheets: - RTL8211F PHY on the Odroid-C1 and MXIII-Plus needs a 10ms assert delay (the datasheet mentions: "For a complete PHY reset, this pin must be asserted low for at least 10ms") and a 30ms deassert delay (the datasheet mentions: "Wait for a further 30ms (for internal circuits settling time) before accessing the PHY register"). The old settings used 10ms for assert and 1000ms for deassert. - IP101GR PHY on the EC-100 and MXQ needs a 10ms assert delay (the datasheet mentions: "Trst | Reset period | 10ms") and a 10ms deassert delay as well (the datasheet mentions: "Tclk_MII_rdy | MII/RMII clock output ready after reset released | 10ms")). The old settings used 10ms for assert and 1000ms for deassert. No functional changes intended. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-20ARM: dts: aspeed: Enable video engine on romulus and wtherspoonEddie James2-0/+24
Enable the video engine and add it's optional reserved memory region. Use 32MB for the reserved memory since the video engine could need up to two 1920x1200@32bpp source buffers. Source buffers: 2 * 1920 * 1200 * 4 = 18432000 bytes In addition, the V4L2 subsystem will allocate any number of compression buffers, each at most 1/8th the size of the source buffer. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-20ARM: dts: aspeed: Add Inspur fp5280g2 BMC machineJohn Wang2-0/+847
The fp5280g2 is an OpenPower server platform with an ASPEED AST2500 BMC. Signed-off-by: John Wang <wangzqbj@inspur.com> Reviewed-by: Lei YU <mine260309@gmail.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-19Merge tag 'socfpga_dts_updates_for_v5.3' of ↵Olof Johansson2-10/+30
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.3 - Use the new "altr,socfpga-stmmac-a10-s10" for the EMAC controllers on Arria10/Stratix10 - Add the ltc2497 i2c entry on the Arria10 devkit - Add the EMAC OCP reset property on the Arria10 * tag 'socfpga_dts_updates_for_v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: arria10: Add EMAC OCP reset property ARM: dts: socfpga: add ltc2497 on arria10 devkit arm64: dts: stratix10: use the "altr,socfpga-stmmac-a10-s10" binding ARM: dts: socfpga: use the "altr,socfpga-stmmac-a10-s10" binding Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-19ARM: dts: hip04: Update coresight DT bindingsLeo Yan1-9/+9
CoreSight DT bindings have been updated, thus the old compatible strings are obsolete and the drivers will report warning if DTS uses these obsolete strings. This patch switches to the new bindings for CoreSight dynamic funnel and static replicator, so can dismiss warning during initialisation. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-06-19Merge tag 'samsung-dt-5.3' of ↵Olof Johansson5-126/+142
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.3 1. Fixes for minor warnings. 2. Enable ADC on Exynos5410 Odroid XU board. * tag 'samsung-dt-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Add ADC node to Exynos5410 and Odroid XU ARM: dts: exynos: Raise maximum buck regulator voltages on Arndale Octa ARM: dts: exynos: Move CPU OPP tables out of SoC node on Exynos5420 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-19Merge tag 'vexpress-updates-5.3' of ↵Olof Johansson2-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt ARMv7 Vexpress updates for v5.3 1. Couple of updates switching to use new/updated bindings for CoreSight dynamic funnel components and NOR flash partition type 2. Disable NOR flash on Vexpress TC2 platform as it conflicts with CPU power management. This follows what we have on ARMv8 Juno platform and is required after recent commit that enabled CFI NOR FLASH in multi_v7 defconfig * tag 'vexpress-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: ARM: dts: vexpress: set the right partition type for NOR flash arm: dts: vexpress-v2p-ca15_a7: disable NOR flash node by default ARM: dts: vexpress-v2p-ca15_a7: update coresight DT bindings Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-19Merge tag 'omap-for-v5.3/ti-sysc-dt-signed' of ↵Olof Johansson9-43/+54
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt ti-sysc dts changes for v5.3 We can now drop the custom dts property "ti,hwmods" for drivers that have the ti-sysc interconnect target module configured in dts. Let's start with a minimal changes to omap4 uart and mmc. We use omap4 as the starting point as it has runtime PM implemented and all the omap variants after that are based on it with similar clkctrl clock for the modules. More devices will be updated later on as they get tested. Note that these changes are based on the related ti-sysc driver changes. * tag 'omap-for-v5.3/ti-sysc-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits) ARM: dts: Drop legacy custom hwmods property for omap4 mmc ARM: dts: Drop legacy custom hwmods property for omap4 uart bus: ti-sysc: Detect uarts also on omap34xx bus: ti-sysc: Do rstctrl reset handling in two phases bus: ti-sysc: Add support for disabling module without legacy mode bus: ti-sysc: Set ENAWAKEUP if available bus: ti-sysc: Handle swsup idle mode quirks bus: ti-sysc: Handle clockactivity for enable and disable bus: ti-sysc: Enable interconnect target module autoidle bit on enable bus: ti-sysc: Allow QUIRK_LEGACY_IDLE even if legacy_mode is not set bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits bus: ti-sysc: Support 16-bit writes too bus: ti-sysc: Add support for missing clockdomain handling ARM: dts: dra71x: Disable usb4_tm target module ARM: dts: dra71x: Disable rtc target module ARM: dts: dra76x: Disable usb4_tm target module ARM: dts: dra76x: Disable rtc target module ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values ARM: dts: am57xx-idk: Remove support for voltage switching for SD card bus: ti-sysc: Handle devices with no control registers ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-19Merge tag 'omap-for-v5.3/dt-signed' of ↵Olof Johansson12-45/+369
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt dts changes for omap variants for v5.3 This series of changes improves support for few boards: - configure another lcd type for logicpd torpedo devkit - a series of updates for am335x phytec boards - configure mmc card detect pin for am335x-baltos * tag 'omap-for-v5.3/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-baltos: add support for MMC1 CD pin ARM: dts: am335x-baltos: Fix PHY mode for ethernet ARM: dts: Add support for phyBOARD-REGOR-AM335x ARM: dts: am335x-pcm-953: Remove eth phy delay ARM: dts: am335x-pcm-953: Update user led names ARM: dts: am335x-phycore-som: Enable gpmc node in dts files ARM: dts: am335x-phycore-som: Add emmc node ARM: dts: am335x phytec boards: Remove regulator node ARM: dts: Add LCD type 28 support to LogicPD Torpedo DM3730 devkit Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-19Merge tag 'v5.3-rockchip-dts32-1' of ↵Olof Johansson9-66/+1143
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt A lot more love for rk3288 in general and veyron specially with changes all over the place. * tag 'v5.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (21 commits) ARM: dts: rockchip: Split GPIO keys for veyron into multiple devices ARM: dts: rockchip: Add HDMI i2c unwedging for rk3288-veyron ARM: dts: rockchip: Add unwedge pinctrl entries for dw_hdmi on rk3288 ARM: dts: rockchip: Switch to builtin HDMI DDC bus on rk3288-veyron ARM: dts: rockchip: Add pin names for rk3288-veyron jaq, mickey, speedy ARM: dts: rockchip: fix pwm-cells for rk3288's pwm3 ARM: dts: rockchip: Configure the GPU thermal zone for mickey ARM: dts: rockchip: Use the GPU to cool CPU thermal zone of veyron mickey ARM: dts: rockchip: remove GPU 500 MHz OPP on rk3288 ARM: dts: rockchip: Use GPU as cooling device for the GPU thermal zone of the rk3288 ARM: dts: rockchip: Add #cooling-cells entry for rk3288 GPU ARM: dts: rockchip: Mark that the rk3288 timer might stop in suspend ARM: dts: rockchip: Add pin names for rk3288-veyron-jerry ARM: dts: rockchip: Add pin names for rk3288-veyron-minnie ARM: dts: raise GPU trip point temperature for speedy to 80 degC ARM: dts: rockchip: raise GPU trip point temperatures for veyron ARM: dts: rockchip: raise CPU trip point temperature for veyron to 100 degC ARM: dts: rockchip: Make rk3288-veyron-minnie run at hs200 ARM: dts: rockchip: Make rk3288-veyron-mickey's emmc work again ARM: dts: rockchip: Remove bogus 'i2s_clk_out' from rk3288-veyron-mickey ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-19Merge tag 'integrator-dts-v5.3-arm-soc' of ↵Olof Johansson8-0/+36
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt DTS updates for the Integrator, target kernel v5.3. * tag 'integrator-dts-v5.3-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: dts: vexpress: specify AFS partition ARM: dts: realview: specify AFS partition ARM: dts: versatile: specify AFS partition ARM: dts: integrator: specify AFS partition Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-16ARM: dts: qcom: msm8974-hammerhead: add support for displayBrian Masney1-0/+58
Add initial support for the display found on the LG Nexus 5 (hammerhead) phone. This is based on work from Jonathan Marek. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-16ARM: dts: msm8974: add display supportBrian Masney1-0/+132
Add the MDP5, DSI and DSI PHY blocks for the display found on the msm8974 SoCs. This is based on work from msm8916.dtsi and Jonathan Marek. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-16ARM: dts: qcom: msm8974-hammerhead: add support for backlightBrian Masney1-0/+34
Add necessary device tree nodes for the main LCD backlight. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-16ARM: dts: qcom: msm8974-hammerhead: add touchscreen supportJonathan Marek1-0/+64
Add support for the Synaptics RMI4 touchscreen that is found on the Nexus 5. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-14ARM: dts: da850-evm: enable cpufreqBartosz Golaszewski1-0/+13
Enable cpufreq-dt support for da850-evm. The cvdd is supplied by the tps65070 pmic with configurable output voltage. By default da850-evm boards support frequencies up to 375MHz so enable this operating point. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Adam Ford <aford173@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-06-14ARM: dts: da850-lcdk: enable cpufreqDavid Lechner1-0/+36
Add a fixed regulator for the da850-lcdk board along with board-specific CPU configuration. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-06-14ARM: dts: da850-lego-ev3: enable cpufreqDavid Lechner1-0/+30
Add a fixed regulator for the LEGO EV3 board along with board-specific CPU configuration. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-06-14ARM: dts: da850: add cpu node and operating points to DTDavid Lechner1-0/+50
This adds a cpu node and operating points to the common da850.dtsi file. All operating points above 300MHz are disabled by default. Regulators need to be hooked up on a per-board basis. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-06-12Merge branch 'baltos' into omap-for-v5.3/dtTony Lindgren3-3/+38
2019-06-12ARM: dts: am335x-baltos: add support for MMC1 CD pinYegor Yefremov3-0/+35
Baltos 5221/3220 devices provide CD signal on GPIO2_18. Baltos 2110 device provides CD signal on GPIO1_15. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-06-12ARM: dts: am335x-baltos: Fix PHY mode for ethernetYegor Yefremov3-3/+3
The PHY must add both tx and rx delay and not only on the tx clock. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-06-11ARM: dts: exynos: Add ADC node to Exynos5410 and Odroid XUKrzysztof Kozlowski4-12/+26
Move the ADC from exynos5420.dtsi to a shared file between Exynos5410 and Exynos542x: exynos54xx.dtsi. Enable the ADC on Odroid XU board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-06-10ARM: dts: arria10: Add EMAC OCP reset propertyDinh Nguyen1-5/+6
Add the EMAC's OCP reset property on Arria10. The OCP reset bits are also needed to correctly bring the EMACs out of reset correctly. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-06-10ARM: dts: socfpga: add ltc2497 on arria10 devkitAlan Tull1-0/+19
Add the two ltc2497 devices that are on the SoCFPGA Arria10 Socdk board at addresses 0x14 and 0x16. Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-06-10ARM: dts: Add support for phyBOARD-REGOR-AM335xTeresa Remmet3-0/+248
Adding support for phyBOARD-REGOR-AM335x: - CAN - UART0 / UART2 - RS485 - USB device - i2c RTC - SD - ethernet0 RMII - ethernet1 MII - Digital I/Os Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-07 06:42:54 +0300