summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2020-12-30ARM: tegra: Populate OPP table for Tegra20 VentanaJon Hunter1-0/+11
commit bd7cd7e05a42491469ca19861da44abc3168cf5f upstream. Commit 9ce274630495 ("cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now)") update the Tegra20 CPUFREQ driver to use the generic CPUFREQ device-tree driver. Since this change CPUFREQ support on the Tegra20 Ventana platform has been broken because the necessary device-tree nodes with the operating point information are not populated for this platform. Fix this by updating device-tree for Venata to include the operating point informration for Tegra20. Fixes: 9ce274630495 ("cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now)") Cc: stable@vger.kernel.org Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30ARM: dts: at91: sama5d2: fix CAN message ram offset and sizeNicolas Ferre1-3/+3
commit 85b8350ae99d1300eb6dc072459246c2649a8e50 upstream. CAN0 and CAN1 instances share the same message ram configured at 0x210000 on sama5d2 Linux systems. According to current configuration of CAN0, we need 0x1c00 bytes so that the CAN1 don't overlap its message ram: 64 x RX FIFO0 elements => 64 x 72 bytes 32 x TXE (TX Event FIFO) elements => 32 x 8 bytes 32 x TXB (TX Buffer) elements => 32 x 72 bytes So a total of 7168 bytes (0x1C00). Fix offset to match this needed size. Make the CAN0 message ram ioremap match exactly this size so that is easily understandable. Adapt CAN1 size accordingly. Fixes: bc6d5d7666b7 ("ARM: dts: at91: sama5d2: add m_can nodes") Reported-by: Dan Sneddon <dan.sneddon@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Cristian Birsan <cristian.birsan@microchip.com> Cc: stable@vger.kernel.org # v4.13+ Link: https://lore.kernel.org/r/20201203091949.9015-1-nicolas.ferre@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30ARM: dts: pandaboard: fix pinmux for gpio user button of Pandaboard ESH. Nikolaus Schaller1-1/+1
commit df9dbaf2c415cd94ad520067a1eccfee62f00a33 upstream. The pinmux control register offset passed to OMAP4_IOPAD is odd. Fixes: ab9a13665e7c ("ARM: dts: pandaboard: add gpio user button") Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30ARM: 9036/1: uncompress: Fix dbgadtb size parameter nameGeert Uytterhoeven1-2/+2
[ Upstream commit 1ecec38547d415054fdb63a231234f44396b6d06 ] The dbgadtb macro is passed the size of the appended DTB, not the end address. Fixes: c03e41470e901123 ("ARM: 9010/1: uncompress: Print the location of appended DTB") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: meson: fix PHY deassert timing requirementsStefan Agner2-2/+2
[ Upstream commit 656ab1bdcd2b755dc161a9774201100d5bf74b8d ] According to the datasheet (Rev. 1.9) the RTL8211F requires at least 72ms "for internal circuits settling time" before accessing the PHY registers. On similar boards with the same PHY this fixes an issue where Ethernet link would not come up when using ip link set down/up. Fixes: a2c6e82e5341 ("ARM: dts: meson: switch to the generic Ethernet PHY reset bindings") Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # on Odroid-C1+ Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/ff78772b306411e145769c46d4090554344db41e.1607363522.git.stefan@agner.ch Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: at91: sama5d2: map securam as deviceClaudiu Beznea1-0/+1
[ Upstream commit 9b5dcc8d427e2bcb84c49eb03ffefe11e7537a55 ] Due to strobe signal not being propagated from CPU to securam the securam needs to be mapped as device or strongly ordered memory to work properly. Otherwise, updating to one offset may affect the adjacent locations in securam. Fixes: d4ce5f44d4409 ("ARM: dts: at91: sama5d2: Add securam node") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/1606903025-14197-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: at91: sam9x60ek: remove bypass propertyClaudiu Beznea1-4/+0
[ Upstream commit ab8a9bb41b2c330a0b280280bf37b6f3b1dd1e58 ] atmel,osc-bypass property sets the bit 1 at main oscillator register. On SAM9X60 this bit is not valid according to datasheet (chapter 28.16.9 PMC Clock Generator Main Oscillator Register). Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Marco Cardellini <marco.cardellini@microchip.com> Link: https://lore.kernel.org/r/1606903025-14197-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: at91: at91sam9rl: fix ADC triggersAlexandre Belloni1-8/+11
[ Upstream commit 851a95da583c26e2ddeb7281e9b61f0d76ea5aba ] The triggers for the ADC were taken from at91sam9260 dtsi but are not correct. Fixes: a4c1d6c75822 ("ARM: at91/dt: sam9rl: add lcd, adc, usb gadget and pwm support") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201128222818.1910764-10-alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: Remove non-existent i2c1 from 98dx3236Chris Packham1-5/+0
[ Upstream commit 7f24479ead579459106bb55c2320a000135731f9 ] The switches with integrated CPUs have only got a single i2c controller. They incorrectly gained one when they were split from the Armada-XP. Fixes: 43e28ba87708 ("ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: at91: sama5d3_xplained: add pincontrol for USB HostCristian Birsan1-0/+7
[ Upstream commit e1062fa7292f1e3744db0a487c4ac0109e09b03d ] The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without it the driver probes but VBus is not powered because of wrong pincontrol configuration. Fixes: b7c2b61570798 ("ARM: at91: add Atmel's SAMA5D3 Xplained board") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20201118120019.1257580-4-cristian.birsan@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: at91: sama5d4_xplained: add pincontrol for USB HostCristian Birsan1-0/+7
[ Upstream commit be4dd2d448816a27c1446f8f37fce375daf64148 ] The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without it the driver probes but VBus is not powered because of wrong pincontrol configuration. Fixes: 38153a017896f ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20201118120019.1257580-3-cristian.birsan@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: at91: sam9x60: add pincontrol for USB HostCristian Birsan1-0/+9
[ Upstream commit 5ba6291086d2ae8006be9e0f19bf2001a85c9dc1 ] The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without it the driver probes but VBus is not powered because of wrong pincontrol configuration. Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20201118120019.1257580-2-cristian.birsan@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: tacoma: Fix node vs reg mismatch for flash memoryAndrew Jeffery1-1/+1
[ Upstream commit cbee028da69d31cb927142e2828710de55a49f2a ] The mismatch lead to a miscalculation of regions in another patch, and shouldn't be mismatched anyway, so make them consistent. Fixes: 575640201e66 ("ARM: dts: aspeed: tacoma: Use 64MB for firmware memory") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201022014731.2035438-2-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: aspeed: tiogapass: Remove vuartVijay Khemka1-5/+0
[ Upstream commit 14f100c00f1e35e5890340d4c6a64bda5dff4320 ] Removed vuart for facebook tiogapass platform as it uses uart2 and uart3 pin with aspeed uart routing feature. Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Fixes: ffdbf494821d ("ARM: dts: aspeed: tiogapass: Enable VUART") Link: https://lore.kernel.org/r/20200813190431.3331026-1-vijaykhemka@fb.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: aspeed: s2600wf: Fix VGA memory region locationJoel Stanley1-2/+2
[ Upstream commit 9e1cc9679776f5b9e42481d392b1550753ebd084 ] The VGA memory region is always from the top of RAM. On this board, that is 0x80000000 + 0x20000000 - 0x01000000 = 0x9f000000. This was not an issue in practice as the region is "reserved" by the vendor's u-boot reducing the amount of available RAM, and the only user is the host VGA device poking at RAM over PCIe. That is, nothing from the ARM touches it. It is worth fixing as developers copy existing device trees when building their machines, and the XDMA driver does use the memory region from the ARM side. Fixes: c4043ecac34a ("ARM: dts: aspeed: Add S2600WF BMC Machine") Reported-by: John Wang <wangzhiqiang.bj@bytedance.com> Link: https://lore.kernel.org/r/20200922064234.163799-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30ARM: dts: aspeed-g6: Fix the GPIO memory sizeBilly Tsai1-1/+1
[ Upstream commit 886f82ce9f1f4559c139fdb2d79d158999ca38cd ] The GPIO controller is a GPIO controller followed by some SGPIO controllers, which are a different type of device with their own binding and drivers. Make the gpio node cover the only conventional GPIO controller. Fixes: 8dbcb5b709b9 ("ARM: dts: aspeed-g6: Add gpio devices") Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201012033150.21056-2-billy_tsai@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-26ARM: dts: exynos: fix USB 3.0 pins supply being turned off on Odroid XUKrzysztof Kozlowski1-0/+2
commit bd7e7ff56feea7810df900fb09c9741d259861d9 upstream. On Odroid XU LDO12 and LDO15 supplies the power to USB 3.0 blocks but the GPK GPIO pins are supplied by LDO7 (VDDQ_LCD). LDO7 also supplies GPJ GPIO pins. The Exynos pinctrl driver does not take any supplies, so to have entire GPIO block always available, make the regulator always on. Fixes: 88644b4c750b ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201015182044.480562-3-krzk@kernel.org Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-26ARM: dts: exynos: fix USB 3.0 VBUS control and over-current pins on Exynos5410Krzysztof Kozlowski2-0/+32
commit 3d992fd8f4e0f09c980726308d2f2725587b32d6 upstream. The VBUS control (PWREN) and over-current pins of USB 3.0 DWC3 controllers are on Exynos5410 regular GPIOs. This is different than for example on Exynos5422 where these are special ETC pins with proper reset values (pulls, functions). Therefore these pins should be configured to enable proper USB 3.0 peripheral and host modes. This also fixes over-current warning: [ 6.024658] usb usb4-port1: over-current condition [ 6.028271] usb usb3-port1: over-current condition Fixes: cb0896562228 ("ARM: dts: exynos: Add USB to Exynos5410") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201015182044.480562-2-krzk@kernel.org Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-26ARM: dts: exynos: fix roles of USB 3.0 ports on Odroid XUKrzysztof Kozlowski1-2/+2
commit ecc1ff532b499d20304a4f682247137025814c34 upstream. On Odroid XU board the USB3-0 port is a microUSB and USB3-1 port is USB type A (host). The roles were copied from Odroid XU3 (Exynos5422) design which has it reversed. Fixes: 8149afe4dbf9 ("ARM: dts: exynos: Add initial support for Odroid XU board") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201015182044.480562-1-krzk@kernel.org Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-10ARM: dts: mmp2-olpc-xo-1-75: clear the warnings when make dtbsZhen Lei1-2/+1
The check_spi_bus_bridge() in scripts/dtc/checks.c requires that the node have "spi-slave" property must with "#address-cells = <0>" and "#size-cells = <0>". But currently both "#address-cells" and "#size-cells" properties are deleted, the corresponding default values are 2 and 1. As a result, the check fails and below warnings is displayed. arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2-olpc-xo-1-75.dtb: Warning (spi_bus_reg): \ Failed prerequisite 'spi_bus_bridge' Because the value of "#size-cells" is already defined as zero in the node "ssp3: spi@d4037000" in arch/arm/boot/dts/mmp2.dtsi. So we only need to explicitly add "#address-cells = <0>" and keep "#size-cells" no change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20201207084752.1665-2-thunder.leizhen@huawei.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-07Merge tag 'imx-fixes-5.10-5' of ↵Arnd Bergmann2-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, round 5: - Fix a regression on SoC revision detection with ANATOP, that is introduced by commit 4a4fb66119eb ("ARM: imx: Add missing of_node_put()"). - Drop PAD_GPIO_6 from imx6qdl-wandboard ENET pin group, as the pin is used by camera sensor now. - Fix I2C3_SCL pinmux on imx6qdl-kontron-samx6i board, so that SoM EEPROM can be accessed. * tag 'imx-fixes-5.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp ARM: imx: Use correct SRC base address Link: https://lore.kernel.org/r/20201201091820.GW4072@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-07Merge tag 'sunxi-fixes-for-5.10-2' of ↵Arnd Bergmann5-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A few more RGMII-ID fixes, and a bunch of other more random fixes * tag 'sunxi-fixes-for-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY ARM: dts: sun8i: v3s: fix GIC node memory range ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: s3: pinecube: align compatible property to other S3 boards ARM: sunxi: Add machine match for the Allwinner V3 SoC arm64: dts: allwinner: h6: orangepi-one-plus: Fix ethernet Link: https://lore.kernel.org/r/1280f1de-1b6d-4cc2-8448-e5a9096a41e8.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-06Merge tag 'kbuild-fixes-v5.10-2' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Move -Wcast-align to W=3, which tends to be false-positive and there is no tree-wide solution. - Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a preprocessor option and makes sense for .S files as well. - Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings. - Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings. - Fix undesirable line breaks in *.mod files. * tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: avoid split lines in .mod files kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1 kbuild: Hoist '--orphan-handling' into Kconfig Kbuild: do not emit debug info for assembly with LLVM_IAS=1 kbuild: use -fmacro-prefix-map for .S sources Makefile.extrawarn: move -Wcast-align to W=3
2020-12-01kbuild: Hoist '--orphan-handling' into KconfigNathan Chancellor1-1/+3
Currently, '--orphan-handling=warn' is spread out across four different architectures in their respective Makefiles, which makes it a little unruly to deal with in case it needs to be disabled for a specific linker version (in this case, ld.lld 10.0.1). To make it easier to control this, hoist this warning into Kconfig and the main Makefile so that disabling it is simpler, as the warning will only be enabled in a couple places (main Makefile and a couple of compressed boot folders that blow away LDFLAGS_vmlinx) and making it conditional is easier due to Kconfig syntax. One small additional benefit of this is saving a call to ld-option on incremental builds because we will have already evaluated it for CONFIG_LD_ORPHAN_WARN. To keep the list of supported architectures the same, introduce CONFIG_ARCH_WANT_LD_ORPHAN_WARN, which an architecture can select to gain this automatically after all of the sections are specified and size asserted. A special thanks to Kees Cook for the help text on this config. Link: https://github.com/ClangBuiltLinux/linux/issues/1187 Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-01ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pinBernd Bauer1-1/+1
Use the correct pin for the i2c scl signal else we can't access the SoM eeprom. Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module") Signed-off-by: Bernd Bauer <bernd.bauer@anton-paar.com> [m.felsch@pengutronix.de: Adapt commit message] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-12-01ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrpFabio Estevam1-1/+0
Since commit 8ad2d1dcce54 ("ARM: dts: imx6qdl-wandboard: Add OV5645 camera support") the PAD_GPIO_6 is used for providing the camera sensor clock. Remove it from the enetgrp to fix the following IOMXU conflict: [ 9.972414] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_GPIO_6 already requested by 2188000.ethernet; cannot claim for 1-003c [ 9.983857] imx6q-pinctrl 20e0000.pinctrl: pin-140 (1-003c) status -22 [ 9.990514] imx6q-pinctrl 20e0000.pinctrl: could not request pin 140 (MX6Q_PAD_GPIO_6) from group ov5645grp on device 20e0000.pinctrl Fixes: 8ad2d1dcce54 ("ARM: dts: imx6qdl-wandboard: Add OV5645 camera support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-28Merge tag 'arm-soc-fixes-v5.10-3' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Another set of patches for devicetree files and Arm SoC specific drivers: - A fix for OP-TEE shared memory on non-SMP systems - multiple code fixes for the OMAP platform, including one regression for the CPSW network driver and a few runtime warning fixes - Some DT patches for the Rockchip RK3399 platform, in particular fixing the MMC device ordering that recently became nondeterministic with async probe. - Multiple DT fixes for the Tegra platform, including a regression fix for suspend/resume on TX2 - A regression fix for a user-triggered fault in the NXP dpio driver - A regression fix for a bug caused by an earlier bug fix in the xilinx firmware driver - Two more DTC warning fixes - Sylvain Lemieux steps down as maintainer for the NXP LPC32xx platform" * tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) arm64: tegra: Fix Tegra234 VDK node names arm64: tegra: Wrong AON HSP reg property size arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1 arm64: tegra: Correct the UART for Jetson Xavier NX arm64: tegra: Disable the ACONNECT for Jetson TX2 optee: add writeback to valid memory type firmware: xilinx: Use hash-table for api feature check firmware: xilinx: Fix SD DLL node reset issue soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) ARM: dts: dra76x: m_can: fix order of clocks bus: ti-sysc: suppress err msg for timers used as clockevent/source MAINTAINERS: Remove myself as LPC32xx maintainers arm64: dts: qcom: clear the warnings caused by empty dma-ranges arm64: dts: broadcom: clear the warnings caused by empty dma-ranges ARM: dts: am437x-l4: fix compatible for cpsw switch dt node arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc. arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance arm64: dts: rockchip: fix NanoPi R2S GMAC clock name ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled() ...
2020-11-27Merge tag 'omap-for-v5.10/fixes-rc5-signed' of ↵Arnd Bergmann2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for various issues noticed during the -rc cycle: - Earlier omap4 cpuidle fix was incomplete and needs to use a configured idle state instead - Fix am4 cpsw driver compatible to avoid invalid resource error for the legacy driver - Two kconfig fixes for genpd support that we added for for v5.10 for proper location of the option and adding missing option - Fix ti-sysc reset status checking on enabling modules to ignore quirky modules with reset status only usable when the quirk is activated during reset. Also fix bogus resetdone warning for cpsw and modules with no sysst register reset status bit - Suppress a ti-sysc warning for timers reserved as system timers - Fix the ordering of clocks for dra7 m_can * tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra76x: m_can: fix order of clocks bus: ti-sysc: suppress err msg for timers used as clockevent/source ARM: dts: am437x-l4: fix compatible for cpsw switch dt node ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled() bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw bus: ti-sysc: Fix reset status check for modules with quirks ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-24ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHYAdam Sampson1-2/+2
The RX/TX delays for the Ethernet PHY on the Linksprite pcDuino 3 Nano are configured in hardware, using resistors that are populated to pull the RTL8211E's RXDLY/TXDLY pins low or high as needed. phy-mode should be set to rgmii-id to reflect this. Previously it was set to rgmii, which used to work but now results in the delays being disabled again as a result of the bugfix in commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Tested on two pcDuino 3 Nano boards purchased in 2015. Without this fix, Ethernet works unreliably on one board and doesn't work at all on the other. Fixes: 061035d456c9 ("ARM: dts: sun7i: Add dts file for pcDuino 3 Nano board") Signed-off-by: Adam Sampson <ats@offog.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20201123174739.6809-1-ats@offog.org
2020-11-23Merge tag 'efi-urgent-for-v5.10-rc3' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Borislav Petkov: "Forwarded EFI fixes from Ard Biesheuvel: - fix memory leak in efivarfs driver - fix HYP mode issue in 32-bit ARM version of the EFI stub when built in Thumb2 mode - avoid leaking EFI pgd pages on allocation failure" * tag 'efi-urgent-for-v5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Free efi_pgd with free_pages() efivarfs: fix memory leak in efivarfs_create() efi/arm: set HSCTLR Thumb2 bit correctly for HVC calls from HYP
2020-11-20ARM: dts: sun8i: v3s: fix GIC node memory rangeIcenowy Zheng1-1/+1
Currently the GIC node in V3s DTSI follows some old DT examples, and being broken. This leads a warning at boot. Fix this. Fixes: f989086ccbc6 ("ARM: dts: sunxi: add dtsi file for V3s SoC") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201120050851.4123759-1-icenowy@aosc.io
2020-11-19ARM: dts: dra76x: m_can: fix order of clocksMarc Kleine-Budde1-2/+2
According to the bosch,m_can.yaml bindings the first clock shall be the "hclk", while the second clock "cclk". This patch fixes the order accordingly. Fixes: 0adbe832f21a ("ARM: dts: dra76x: Add MCAN node") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16Merge tag 'imx-fixes-5.10-4' of ↵Arnd Bergmann3-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, round 4: - Fix MDIO over clocking on vf610-zii-dev-rev-b board to get switch device work reliably. - Fix imx50-evk IOMUX for the chip select 1 to use GPIO4_13 instead of the native CSPI_SSI function. - Fix voltage for 1.6GHz CPU operating point on i.MX8MM to match hardware datasheet. - Fix phy-mode for KSZ9031 PHY on imx6qdl-udoo board. * tag 'imx-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx50-evk: Fix the chip select 1 IOMUX arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy Link: https://lore.kernel.org/r/20201116090702.GM5849@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-13Merge tag 'sunxi-fixes-for-5.10-1' of ↵Arnd Bergmann11-15/+10
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Mostly some fixes for a fallout in a PHY driver that pointed out errors in our DTs. Along with that, Jernej agreed to be a reviewer! * tag 'sunxi-fixes-for-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h5: OrangePi Prime: Fix ethernet node arm64: dts: allwinner: a64: bananapi-m64: Enable RGMII RX/TX delay on PHY arm64: dts: allwinner: h5: libretech-all-h5-cc: Enable RGMII RX/TX delay on PHY ARM: dts: sunxi: bananapi-m2-plus: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHY ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHY ARM: dts: sun8i: h3: orangepi-plus2e: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun7i: cubietruck: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHY Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high" ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix ethernet node arm64: dts: allwinner: h5: OrangePi PC2: Fix ethernet node arm64: dts: allwinner: a64: Pine64 Plus: Fix ethernet node arm64: dts: allwinner: a64: OrangePi Win: Fix ethernet node arm64: dts: allwinner: Pine H64: Enable both RGMII RX/TX delay arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay arm64: dts: allwinner: pinetab: Drop unnecessary address/size-cells information MAINTAINERS: Add Jernej Škrabec as a reviewer for Allwinner SoCs support Link: https://lore.kernel.org/r/d1a1a6a6-fca4-4f1b-93b3-f2f6963b4e04.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-13Merge tag 'stm32-dt-for-v5.10-fixes-2' of ↵Arnd Bergmann3-8/+17
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.10, round 2 Highlights: ----------- -Fixes are for DHCOM/DHCOR boards: - Fix TA3-GPIO-C button - Fix LED5 mapping - Define VIO regulator supply on DHCOM - Enable thermal sensor support on stm32mp15xx-dhcor - Keep VDDA LDO1 always on to avoid leakage * tag 'stm32-dt-for-v5.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcor ARM: dts: stm32: Define VIO regulator supply on DHCOM ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2 ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2 Link: https://lore.kernel.org/r/65bfc73d-aae1-5309-2e11-1e3da647ad46@st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-13ARM: dts: exynos: revert "add input clock to CMU in Exynos4412 Odroid"Krzysztof Kozlowski1-1/+0
This reverts commit eaf2d2f6895d676dda6c95a652b58594f2887720. The commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid") breaks probing of usb3503 USB hub on Odroid U3. It changes the order of clock drivers probe: the clkout (Exynos PMU) driver is probed before the main clk-exynos4 driver. The clkout driver on Exynos4412 depends on clk-exynos4 but it does not support deferred probe, therefore this dependency and changed probe order causes probe failure. The usb3503 USB hub on Odroid U3 on the other hand requires clkout clock. This can be seen in logs: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200921174818.15525-1-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-13Merge tag 'imx-fixes-5.10-3' of ↵Arnd Bergmann1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, 3rd round: - A series from Krzysztof Kozlowski to fix missing PMIC's interrupt line pull-up for i.MX8MM and i.MX8MN boards. - Set Bluetooth chip max-speed to 4000000 on imx8mm-beacon-som board to fix the choppy Bluetooth audio sound. - Remove non-existent OTG2, usbphynop2, and the usbmisc2 from i.MX8MN device tree. - Fix the endianness setting of RCPM node on Layerscape SoCs. - Add the missing dma-coherent property for qoriq-fman device to improve the performance. - Fix the Ethernet PHY address on imx6q-prti6q board. * tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6q-prti6q: fix PHY address arm64: dts imx8mn: Remove non-existent USB OTG2 arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio arm64: dts: fsl: DPAA FMan DMA operations are coherent arm64: dts: fsl: fix endianness issue of rcpm arm64: dts: imx8mn-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mn-ddr4-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mn-var-som: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-beacon-som: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-var-som: fix missing PMIC's interrupt line pull-up Link: https://lore.kernel.org/r/20201030151821.GA28266@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-11ARM: dts: am437x-l4: fix compatible for cpsw switch dt nodeGrygorii Strashko1-1/+1
Fix compatible the new CPSW switchdev DT node to avoid probing of legacy CPSW driver which fails: [ 2.781009] cpsw 4a100000.switch: invalid resource Fixes: 7bf8f37aea82 ("ARM: dts: am437x-l4: add dt node for new cpsw switchdev driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-10ARM: dts: imx50-evk: Fix the chip select 1 IOMUXFabio Estevam1-1/+1
The SPI chip selects are represented as: cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>; , which means that they are used in GPIO function instead of native SPI mode. Fix the IOMUX for the chip select 1 to use GPIO4_13 instead of the native CSPI_SSI function. Fixes: c605cbf5e135 ("ARM: dts: imx: add device tree support for Freescale imx50evk board") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-09ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOMMarek Vasut1-0/+1
The VDDA LDO1 PMIC output supplies the analog VDDA input of the STM32MP1 on DHCOM, keep it always on, otherwise there could be leakage through the SoC. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-09ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcorMarek Vasut1-0/+4
Enable STM32 Digital Thermal Sensor driver for stm32mp15xx-dhcor SoMs. Fixes: 94cafe1b6482 ("ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157A") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-09ARM: dts: stm32: Define VIO regulator supply on DHCOMMarek Vasut1-0/+1
The VIO regulator is supplied by PMIC Buck3, describe this in the DT. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-09ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2Marek Vasut1-1/+1
On the prototype DHCOM, the LED5 was connected to pin PG2 of the STM32MP15xx, however on the production SoM this was changed to pin PC6. Update the connection in the DT. Fixes: 81d5fc719798 ("ARM: dts: stm32: Add GPIO LEDs for STM32MP1 DHCOM PDK2") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-09ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2Marek Vasut1-7/+10
On the prototype DHCOM, the TA3-GPIO-C button was connected to pin PI11 of the STM32MP15xx, however on the production SoM this was changed to pin PG0 to free up the IRQ line 11 for LAN8710i PHY IRQ. Update the connection in the DT. Since the IRQ line 0 is used for PMIC as well and cannot be shared with the button, make the button polled. Fixes: 87cabf9405cb ("ARM: dts: stm32: Add GPIO keys for STM32MP1 DHCOM PDK2") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-02ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet nodePablo Greco1-1/+1
Ethernet PHY on BananaPi M2 Berry provides RX and TX delays. Fix ethernet node to reflect that fact. Fixes: 27e81e1970a8 ("ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller") Signed-off-by: Pablo Greco <pgreco@centosproject.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/1604326769-39802-1-git-send-email-pgreco@centosproject.org
2020-11-02ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulatorPablo Greco1-5/+5
DCDC1 regulator powers many different subsystems. While some of them can work at 3.0 V, some of them can not. For example, VCC-HDMI can only work between 3.24 V and 3.36 V. According to OS images provided by the board manufacturer this regulator should be set to 3.3 V. Set DCDC1 and DCDC1SW to 3.3 V in order to fix this. Fixes: 23edc168bd98 ("ARM: dts: sun8i: Add board dts file for Banana Pi M2 Berry") Fixes: 27e81e1970a8 ("ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller") Signed-off-by: Pablo Greco <pgreco@centosproject.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/1604326755-39742-1-git-send-email-pgreco@centosproject.org
2020-11-02ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHYPablo Greco1-1/+1
The Ethernet PHY on the Bananapi M1 has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 8a5b272fbf44 ("ARM: dts: sun7i: Add Banana Pi board") Signed-off-by: Pablo Greco <pgreco@centosproject.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/1604326600-39544-1-git-send-email-pgreco@centosproject.org
2020-11-02ARM: dts: s3: pinecube: align compatible property to other S3 boardsMatteo Scordino1-1/+1
The compatible string in the Pine64 Pinecube dts diverges from the ones used in other S3 based boards, like the LicheePi and the Elimo Impetus and Initium. Discussion on LKML decided the PineCube should align to the others. Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201030234325.5865-7-matteo.scordino@gmail.com
2020-11-02ARM: dts: imx6q-prti6q: fix PHY addressOleksij Rempel1-2/+2
Due to bug in the bootloader, the PHY has floating address and may randomly change on each PHY reset. To avoid it, the updated bootloader with the following patch[0] should be used: | ARM: protonic: disable on-die termination to fix PHY bootstrapping | | If on-die termination is enabled, the RXC pin of iMX6 will be pulled | high. Since we already have an 10K pull-down on board, the RXC level on | PHY reset will be ~800mV, which is mostly interpreted as 1. On some | reboots we get 0 instead and kernel can't detect the PHY properly. | | Since the default 0x020e07ac value is 0, it is sufficient to remove this | entry from the affected imxcfg files. | | Since we get stable 0 on pin PHYADDR[2], the PHY address is changed from | 4 to 0. With latest bootloader update, the PHY address will be fixed to "0". [0] https://git.pengutronix.de/cgit/barebox/commit/?id=93f7dcf631edfcda19e7757b28d66017ea274b81 Fixes: 0d446a505592 ("ARM: dts: add Protonic PRTI6Q board") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-02ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clockingAndrew Lunn1-0/+3
The ZII devel B board has two generations of Marvell Switches. The mv88e6352 supports an MDIO clock of 12MHz. However the older 88e6185 does not like 12MHz, and often fails to probe. Reduce the clock speed to 5MHz, which seems to work reliably. Cc: Chris Healy <cphealy@gmail.com> Fixes: b955387667ec ("ARM: dts: ZII: update MDIO speed and preamble") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-14 20:41:40 +0300