summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2024-10-30ARM: dts: omap: omap4-epson-embt2ws: add unknown gpio outputsAndreas Kemnade1-0/+92
Set them to the state seen in a running system, initialized by vendor u-boot or kernel. Add line names where they are defined in the vendor kernel. gpio15 resets something in the display, otherwise meaning of the gpios is not known. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241010122957.85164-4-andreas@kemnade.info Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-30ARM: dts: omap: omap4-epson-embt2ws: wire up regulatorsAndreas Kemnade1-7/+4
Wire up the regulators where usage is plausible. Do not wire them if purpose/usage is unclear like 5V for many things requiring lower voltages. Tested on vendor kernel that backlight definitively does not react on blc_[rl] GPIOs. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241010122957.85164-3-andreas@kemnade.info Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-30ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulatorsAndreas Kemnade1-0/+73
To properly have things running after cold boot, define GPIO regulators. Naming is based on board file. In the vendor kernel they are enabled in a function called bt2ws_dcdc_init() if the system is not booted just to charge the battery. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241010122957.85164-2-andreas@kemnade.info Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-10-29ARM: dts: stm32: add support of WLAN/BT on stm32mp135f-dkChristophe Roullier1-0/+45
Add support of WLAN/BT Murata Type 1DX module: - usart2 is used for Bluetooth interface - sdmmc2 is used for WLAN (sdio) interface Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-10-29ARM: dts: stm32: add support of WLAN/BT on stm32mp157c-dk2Christophe Roullier1-1/+40
Add support of WLAN/BT Murata Type 1DX module: - usart2 is used for Bluetooth interface - sdmmc2 is used for WLAN (sdio) interface Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-10-29ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp135f-dkValentin Caron1-0/+7
On stm32mp135f-dk board, WLAN/BT module LPO_IN pin is wired to RTC OUT2_RMP pin. Provide a pinctrl configuration to enable LSCO on OUT2_RMP. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-10-29ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp157c-dk2Valentin Caron1-0/+10
On stm32mp157c-dk2 board, WLAN/BT module LPO_IN pin is wired to RTC OUT2_RMP pin. Provide a pinctrl configuration to enable LSCO on OUT2_RMP. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-10-29ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp13Valentin Caron1-0/+7
Declare pin for LSCO in stm32-pinctrl provider node to reserve this pin for RTC OUT2_RMP, in stm32mp13-pinctrl.dtsi. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-10-29ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp15Valentin Caron1-0/+7
Declare pin for LSCO in stm32-pinctrl provider node to reserve this pin for RTC OUT2_RMP, in stm32mp15-pinctrl.dtsi. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-10-29ARM: dts: stm32: Describe M24256E write-lockable page in DH STM32MP13xx ↵Marek Vasut1-0/+6
DHCOR SoM DT The STM32MP13xx DHCOR SoM is populated with M24256E EEPROM which has Additional Write lockable page at separate I2C address. Describe the page in DT to make it available. Note that the WLP page on this device is hardware write-protected by R37 which pulls the nWC signal high to VDD_3V3_1V8 power rail. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-10-29ARM: dts: stm32: Add IWDG2 EXTI interrupt mapping and mark as wakeup sourceMarek Vasut1-0/+2
The IWDG2 is capable of generating pre-timeout interrupt, which can be used to wake the system up from suspend to mem. Add the EXTI interrupt mapping and mark the IWDG2 as wake up source. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-10-25ARM: dts: sunxi: add support for RerVision A33-Vstar boardIcenowy Zheng3-0/+302
RerVision A33-Vstar board is a board based on their A33-Core1 SoM (A33 SoC + 512MiB DRAM + 4GiB eMMC + AXP223 PMIC), with multiple peripherals: - MicroSD card slot - 4.0mm/1.7mm DC jack connected to ACIN of AXP223 (and a XH2.54 2-pin connector for alternative 5V DC IN) - OTG-capable microUSB port - Reserved pads for soldering Li-ion battery and/or 3V RTC battery - 3 LRADC-attached keys and 2 fixed function power/reset keys - AP6212 Wi-Fi/BT combo module - On-board GL850G hub attached to the USB host port of A33, and a RTL8152 USB Ethernet chip at the downstream of the hub - Onboard microphone (not supported yet) and headphone jack - 3 UART ports as PH2.0 3-pin connectors (UART2 one is currently used as debug output and others are ignored yet) Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Link: https://patch.msgid.link/20240913104845.4112986-2-uwu@icenowy.me Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-10-25ARM: dts: cubieboard4: Fix DCDC5 regulator constraintsAndre Przywara1-2/+2
The DCDC5 voltage rail in the X-Powers AXP809 PMIC has a resolution of 50mV, so the currently enforced limits of 1.475 and 1.525 volts cannot be set, when the existing regulator value is beyond this range. This will lead to the whole regulator driver to give up and fail probing, which in turn will hang the system, as essential devices depend on the PMIC. In this case a bug in U-Boot set the voltage to 1.75V (meant for DCDC4), and the AXP driver's attempt to correct this lead to this error: ================== [ 4.447653] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded [ 4.450066] vcc-dram: Bringing 1750000uV into 1575000-1575000uV [ 4.460272] vcc-dram: failed to apply 1575000-1575000uV constraint: -EINVAL [ 4.474788] axp20x-regulator axp20x-regulator.0: Failed to register dcdc5 [ 4.482276] axp20x-regulator axp20x-regulator.0: probe with driver axp20x-regulator failed with error -22 ================== Set the limits to values that can be programmed, so any correction will be successful. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Fixes: 1e1dea72651b ("ARM: dts: sun9i: cubieboard4: Add AXP809 PMIC device node and regulators") Link: https://patch.msgid.link/20241007222916.19013-1-andre.przywara@arm.com Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-10-25ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylinHeiko Stuebner1-2/+2
Both the node name as well as the compatible were not named according to the binding expectations, fix that. Fixes: 47bf3a5c9e2a ("ARM: dts: rockchip: add the sound setup for rk3036-kylin board") Cc: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20241008203940.2573684-15-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-10-25ARM: dts: rockchip: Fix the spi controller on rk3036Heiko Stuebner1-3/+3
Compatible and clock names did not match the existing binding. So set the correct values and re-order+rename the clocks. It looks like no rk3036 board did use the spi controller so far, so this was never detected on a running device yet. Fixes: f629fcfab2cd ("ARM: dts: rockchip: support the spi for rk3036") Cc: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20241008203940.2573684-14-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-10-25ARM: dts: rockchip: drop grf reference from rk3036 hdmiHeiko Stuebner1-1/+0
Neither the binding nor the driver implementation specify/use the grf reference provided in the rk3036. And neither does the newer rk3128 user of the hdmi controller. So drop the rockchip,grf property. Fixes: b7217cf19c63 ("ARM: dts: rockchip: add hdmi device node for rk3036") Cc: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20241008203940.2573684-13-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-10-25ARM: dts: rockchip: fix rk3036 acodec nodeHeiko Stuebner1-3/+4
The acodec node is not conformant to the binding. Set the correct nodename, use the correct compatible, add the needed #sound-dai-cells and sort the rockchip,grf below clocks properties as expected. Fixes: faea098e1808 ("ARM: dts: rockchip: add core rk3036 dtsi") Reviewed-by: Dragan Simic <dsimic@manjaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20241008203940.2573684-12-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-10-24ARM: dts: qcom: ipq4019: use nvmem-layoutRosen Penev1-8/+11
nvmem-layout is a more flexible replacement for nvmem-cells. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://lore.kernel.org/r/20241022002444.843484-1-rosenp@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-23ARM: dts: qcom: change labels to lower-caseKrzysztof Kozlowski9-79/+79
DTS coding style expects labels to be lowercase. No functional impact. Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-18-0505bc7d2c56@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-23arm64: dts: qcom: msm: change labels to lower-caseKrzysztof Kozlowski1-1/+1
DTS coding style expects labels to be lowercase. No functional impact. Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-2-0505bc7d2c56@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-23ARM: dts: qcom: sdx65: Add 'linux,pci-domain' to PCIe EP controller nodeManivannan Sadhasivam1-0/+1
'linux,pci-domain' property provides the PCI domain number for the PCI endpoint controllers in a SoC. If this property is not present, then an unstable (across boots) unique number will be assigned. Use this property to specify the domain number based on the actual hardware instance of the PCI endpoint controllers in SDX65 SoC. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20240828-pci-qcom-hotplug-v4-8-263a385fbbcb@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-23ARM: dts: qcom: sdx55: Add 'linux,pci-domain' to PCIe EP controller nodeManivannan Sadhasivam1-0/+1
'linux,pci-domain' property provides the PCI domain number for the PCI endpoint controllers in a SoC. If this property is not present, then an unstable (across boots) unique number will be assigned. Use this property to specify the domain number based on the actual hardware instance of the PCI endpoint controllers in SDX55 SoC. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20240828-pci-qcom-hotplug-v4-7-263a385fbbcb@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-10-22ARM: dts: imx6sll: fix anatop thermal dtbs_check warningsAndreas Kemnade1-1/+2
Fix anatop thermal related dtbs_check warnings about node name and missing thermal-cells property. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6dl: Add support for i.MX6DL DHCOM SoM on PDK2 carrier boardMarek Vasut2-0/+21
Add support for the DH electronics i.MX6DL DHCOM SoM and a PDK2 evaluation board. The evaluation board features three serial ports, USB OTG, USB host with an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, analog audio, PCIe and HDMI video output. All of the aforementioned features except for mSATA are supported, mSATA is not available on i.MX6DL and is only available on DHCOM populated with i.MX6Q SoC which is already supported upstream. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6qdl-dhcom-pdk2: Fill in missing panel power-supplyMarek Vasut1-0/+20
Add missing panel power-supply property to DT to fix the following warning. The power supply on this device is very simple chain of regulators from the main 24V input, describe those. " arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dtb: panel: 'power-supply' is a required property " Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6qdl-dhcom-pdk2: Drop incorrect size-cells in GPIO keysMarek Vasut1-1/+0
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys is not a bus, see dtbs_check warning: " arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-pdk2.dtb: gpio-keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+' " Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6qdl-dhcom-som: Drop bogus regulator-suspend-mem-microvoltMarek Vasut1-2/+0
Drop unused regulator-suspend-mem-microvolt property from PMIC regulator nodes. This property is not used by either U-Boot, Linux, nor is it documented in the DT bindings, remove it. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx7-colibri: Update audio card nameHiago De Franco1-1/+1
Update the audio card name for Colibri iMX7 to match its specific SoM name, making it compliant with the other names for Colibri iMX6 and Apalis iMX6. While this is a breaking change for userspace tooling, it seems time to implement it since no ALSA UCM or related configuration files currently exist and we are in the the process of creating them. Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6qdl-colibri: Update audio card nameHiago De Franco1-1/+1
Update the audio card name for Colibri iMX6 to match its specific SoM name, making it less than 15 characters to fix the following warning fsl-asoc-card sound: ASoC: driver name too long 'imx6dl-colibri-sgtl5000' -> 'imx6dl-colibri-' making it compliant with the ALSA configuration specification [1]. While this is a breaking change for userspace tooling, it seems time to implement it since no ALSA UCM or related configuration files currently exist and we are in the the process of creating them. [1] Documentation/sound/alsa-configuration.rst Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-22ARM: dts: imx6qdl-apalis: Update audio card nameHiago De Franco1-1/+1
Update the audio card name for Apalis iMX6 to match its specific SoM name, making it less than 15 characters to fix the following warning fsl-asoc-card sound: ASoC: driver name too long 'imx6q-apalis-sgtl5000' -> 'imx6q-apalis-sg' making it compliant with the ALSA configuration specification [1]. While this is a breaking change for userspace tooling, it seems time to implement it since no ALSA UCM or related configuration files currently exist and we are in the the process of creating them. [1] Documentation/sound/alsa-configuration.rst Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-21ARM: dts: Reconfigure the MC2 eMMC interfaceLinus Walleij2-11/+64
The eMMC interface was configured to configure the FBCLK into the Alt A setting, but this should be in GPIO mode and available for use as a reset line. Move it to the new mc_a_2 setting, and define this config in the generic options. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20241019-ux500-dts-updates-v1-2-a89bfbd0f680@linaro.org
2024-10-21ARM: dts: ux500: Add touchkeys to CodinasLinus Walleij2-0/+2
The Codina Zinitix touchscreens have touchkeys for HOME and BACK, add these now that the driver and bindings support it. Cc: Nikita Travkin <nikita@trvn.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20241019-ux500-dts-updates-v1-1-a89bfbd0f680@linaro.org
2024-10-21ARM: dts: imx6qdl-dhcom: Fix model typo for i.MX6 DHSOMMarek Vasut3-3/+3
Each DHSOM uses three digits in the Cnnn part, drop the trailing zero. This is a change in comment, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-21ARM: dts: imx6qdl-tx6: Fix 'fixed-clock' descriptionFabio Estevam1-2/+1
Per fixed-clock.yaml, it is not correct to pass unit address and reg to represent 'fixed-clock'. Remove it to fix the following dt-schema warning: clock@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Reported-by: Rob Herring <robh@kernel.org> Closes: https://lore.kernel.org/linux-arm-kernel/172808887941.121658.5039774358299826312.robh@kernel.org/ Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-21ARM: dts: imx6qdl-tx6: Remove 'turn-on-delay-ms'Fabio Estevam5-6/+0
The 'turn-on-delay-ms' property is not documented nor used anywhere else. Remove this invalid property to fix the following dt-schema warning: Unevaluated properties are not allowed ('turn-on-delay-ms' was unexpected) Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-17ARM: dts: amlogic: meson8/8b: remove invalid pinctrl regNeil Armstrong2-30/+26
The pinctrl aobus/cbus was originally here to configure the GPIO interrupt, but it was a bad design and was moved to a separate gpio_intc node because the GPIO interrupt is actually separate from the pinctrl/gpio registers. Drop this reg entry, and fix all the register offsets with a proper range property. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # Odroid-C1 Link: https://lore.kernel.org/r/20241015-topic-amlogic-arm32-upstream-bindings-fixes-pinctrl-dtbs-v1-1-c7291f17063e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-10-16ARM: dts: nxp: imx6ull: add dma support for uart8Sean Nyekjaer1-0/+2
Add dma support on uart8. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-16ARM: dts: nxp: imx6ul: add dma support for all uartsSean Nyekjaer1-0/+16
Add dma support on uart1, uart2, uart3, uart4, uart5, uart6 and uart7. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-16ARM: dts: imx6q-lxr: Add board supportFabio Estevam2-0/+88
The Comvetia LXR board is based on a i.MX6Q phyFLEX-i.MX6 Quad SoM from Phytec. Add a devicetree description for this board. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-10-14ARM: dts: rockchip: Add Relfor Saib boardKarthikeyan Krishnasamy2-0/+423
Saib is an consumer electronics board from Relfor labs Features: - Rockchip RV1109 - 1GB DDR4 - 4GB eMMC - Realtek RTL8821CS Wi-Fi/BT - IR transmitter/receiver - RV3028 RTC - Switch - User leds Add support for it. Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com> Link: https://lore.kernel.org/r/20240912142451.2952633-7-karthikeyan@linumiz.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-10-14ARM: dts: rockchip: Add watchdog node for RV1126Karthikeyan Krishnasamy1-0/+8
Add watchdog node for Rockchip RV1126 Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com> Link: https://lore.kernel.org/r/20240912142451.2952633-3-karthikeyan@linumiz.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-10-14ARM: dts: renesas: kzm9g: Use interrupts-extended for sensorsGeert Uytterhoeven1-5/+3
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/e04fff0e6d7d9ffebf5e3d3fe7682f0d411b60d9.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: kzm9g: Use interrupts-extended for I/O expanderGeert Uytterhoeven1-2/+1
Use the more concise interrupts-extended property to fully describe the interrupt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/c77ffcd01d6e9e90cd1e5578c2af98c9ec6030c9.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: r8a7742-iwg21m: Use interrupts-extended for RTCGeert Uytterhoeven1-2/+1
Use the more concise interrupts-extended property to fully describe the interrupt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/f3838c730a8af5a904939929e30a4d892fef8b39.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: iwg22d-sodimm: Use interrupts-extended for port expanderGeert Uytterhoeven1-2/+1
Use the more concise interrupts-extended property to fully describe the interrupt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/835b5e851939f6fa2c9567d6850a7e0c2574c1c7.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for video decodersGeert Uytterhoeven3-6/+3
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/a8610814e31d0562732672f11d2be1404322121a.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for touchpanelsGeert Uytterhoeven4-8/+4
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/d081d986e3a2b695bc27dbe00aa0fb244a22ffdf.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for PMICsGeert Uytterhoeven8-28/+14
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/934b9b9992dacd72dbad0f5433728aac292a3cfc.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for HDMI bridgesGeert Uytterhoeven10-20/+10
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/850317c7818b100f9afe026e80b6d685affe81a0.1728045620.git.geert+renesas@glider.be
2024-10-14ARM: dts: renesas: Use interrupts-extended for Ethernet PHYsGeert Uytterhoeven10-20/+10
Use the more concise interrupts-extended property to fully describe the interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/623645456e7636f43150a70f8603114b26304818.1728045620.git.geert+renesas@glider.be
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-15 08:48:57 +0300