summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2022-11-18ARM: tegra: Fixup pinmux node namesThierry Reding9-30/+30
Pinmux node names should have a pinmux- prefix and not use underscores. Fix up some cases that didn't follow those rules. Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-11-18ARM: tegra: Use correct compatible string for ASUS TF101 panelThierry Reding1-1/+1
Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-11-17ARM: at91: rm9200: fix usb device clock idMichael Grzeschik1-1/+1
Referring to the datasheet the index 2 is the MCKUDP. When enabled, it "Enables the automatic disable of the Master Clock of the USB Device Port when a suspend condition occurs". We fix the index to the real UDP id which "Enables the 48 MHz clock of the USB Device Port". Cc: nicolas.ferre@microchip.com Cc: ludovic.desroches@microchip.com Cc: alexandre.belloni@bootlin.com Cc: mturquette@baylibre.com Cc: sboyd@kernel.org Cc: claudiu.beznea@microchip.com Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: kernel@pengutronix.de Fixes: 02ff48e4d7f7 ("clk: at91: add at91rm9200 pmc driver") Fixes: 0e0e528d8260 ("ARM: dts: at91: rm9200: switch to new clock bindings") Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221114185923.1023249-2-m.grzeschik@pengutronix.de
2022-11-17ARM: dts: at91: sama7g5: fix signal name of pin PD8Mihai Sain1-1/+1
The signal name of pin PD8 with function D is A22_NANDCLE as it is defined in the datasheet. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> [claudiu.beznea: rebased on top of 6.1-rc1, removed fixes tag] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221114151035.2926-1-mihai.sain@microchip.com
2022-11-17ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrlMichael Grzeschik1-0/+9
We set the PIOC to GPIO mode. This way the pin becomes an input signal will be usable by the controller. Without this change the udc on the 9g20ek does not work. Cc: nicolas.ferre@microchip.com Cc: ludovic.desroches@microchip.com Cc: alexandre.belloni@bootlin.com Cc: linux-arm-kernel@lists.infradead.org Cc: kernel@pengutronix.de Fixes: 5cb4e73575e3 ("ARM: at91: add at91sam9g20ek boards dt support") Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221114185923.1023249-3-m.grzeschik@pengutronix.de
2022-11-17ARM: dts: stm32: Rename mdio0 to mdio on DHCOR Testbench boardMarek Vasut1-1/+1
Replace "mdio0" node with "mdio" to match mdio.yaml DT schema. Fixes: c8ce0dd75515b ("ARM: dts: stm32: Add DHCOR based Testbench board") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-11-17ARM: dts: stm32: add mcp23017 IO expander on I2C1 on stm32mp135f-dkAmelie Delaunay1-0/+14
MCP23017 is an IO expander offering 16 input/output port expander with interrupt output. On stm32mp135f-dk, only INTA is routed (on PG12), but MCP23017 can mirror the bank B interrupts on INTA, that's why the property microchip,irq-mirror is used. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-11-17ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13Amelie Delaunay1-0/+7
MCP23017 interrupt line (routed on PG12) requires to be pulled-up. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-11-17Merge tag 'imx-fixes-6.1-2' of ↵Arnd Bergmann1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.1, 2nd round: - Switch to usb-role-switch for fixing USB device mode on tqma8mqml-mba8mx board, so that Dual Role is fully functional. - A series from Marek Vasut to fix dt-schema warning caused by NAND controller size-cells. - Fix file permission of imx93-pinfunc header. - Enable OCOTP clock in soc-imx8m driver to fix a kexec kernel hang issue. * tag 'imx-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx8m: Enable OCOTP clock before reading the register arm64: dts: imx93-pinfunc: drop execution permission arm64: dts: imx8mn: Fix NAND controller size-cells arm64: dts: imx8mm: Fix NAND controller size-cells ARM: dts: imx7: Fix NAND controller size-cells arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR Link: https://lore.kernel.org/r/20221116090402.GA1274@T480 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-16ARM: dts: sunxi: H3/H5: Add phys property to USB HCI0Andre Przywara1-0/+4
As many other Allwinner SoCs from the last years, the first USB host controller pair in the Allwinner H3 and H5 chips share a USB PHY with the MUSB OTG controller. This is probably the reason why we didn't have a "phys" property in those host controller nodes. This works fine as long as the MUSB controller driver is loaded, as this takes care of the proper PHY setup, including the muxing between MUSB and the HCI. However this requires the MUSB driver to be enabled and loaded, and also upsets U-Boot, which cannot use a HCI port without a "phys" property. Similar to what we did in commit cc72570747e4 ("arm64: dts: allwinner: A64: properly connect USB PHY to port 0"), add the "phys" property to the OHCI0 and EHCI0 DT nodes in the shared H3/H5 .dtsi file. This is not only the proper description of the hardware, but also avoids a nasty error message in U-Boot triggered by a recent patch. (The port never worked in host mode, but the error was suppressed due to a bug.) When using the MUSB port in OTG mode, this also fixes host mode switching, so people can use OTG adapters to connect a USB device to port 0. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221110005507.19464-1-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-11-16ARM: dts: suniv: f1c100s: add LRADC nodeAndre Przywara1-0/+8
The Allwinner F1C100s series of SoCs contain a LRADC (aka. KEYADC) compatible to the version in other SoCs. The manual doesn't mention the ratio of the input voltage that is used, but comparing actual measurements with the values in the register suggests that it is 3/4 of Vref. Add the DT node describing the base address and interrupt. As in the older SoCs, there is no explicit reset or clock gate, also there is a dedicated, non-multiplexed pin, so need for more properties. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221107005433.11079-8-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-11-16ARM: dts: suniv: f1c100s: add CIR DT nodeAndre Przywara1-0/+11
The CIR (infrared receiver) controller in the Allwinner F1C100s series of SoCs is compatible to the ones used in other Allwinner SoCs. Add the DT node describing the resources of the controller. There are multiple possible pinmuxes, but none as them seem to be an obvious choice, so refrain from adding any pincontroller subnodes for now. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221107005433.11079-7-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-11-16ARM: dts: suniv: f1c100s: add I2C DT nodesAndre Przywara1-0/+42
The Allwinner F1C100s series of SoCs contain three I2C controllers compatible to the ones used in other Allwinner SoCs. Add the DT nodes describing the resources of the controllers. At least one board connects an on-board I2C chip to PD0/PD12 (I2C0), so include those pins already, to simplify referencing them later. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221107005433.11079-4-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-11-16ARM: dts: suniv: f1c100s: add PWM nodeAndre Przywara1-0/+9
The Allwinner F1C100s family of SoCs contain a PWM controller compatible to the one used in the A20 chip. Add the DT node so that any users can simply enable it in their board DT. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221107005433.11079-3-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-11-15ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188Johan Jonker2-1/+7
The clock source and the sched_clock provided by the arm_global_timer on Rockchip rk3066a/rk3188 are quite unstable because their rates depend on the CPU frequency. Recent changes to the arm_global_timer driver makes it impossible to use. On the other side, the arm_global_timer has a higher rating than the ROCKCHIP_TIMER, it will be selected by default by the time framework while we want to use the stable Rockchip clock source. Keep the arm_global_timer disabled in order to have the DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/f275ca8d-fd0a-26e5-b978-b7f3df815e0a@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-14Merge tag 'ux500-dts-for-v6.2' of ↵Arnd Bergmann6-13/+44
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Some Ux500 DTS updates for v6.2: - Some cleanups from Krzysztof for the SPI nodes. - Fix up the NFC chip in Janice. - Drop a bogus power domain regulator that isn't used for the crypto blocks. (We use proper power domains now.) - Add GPS to the Kyle. * tag 'ux500-dts-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: ux500: Add GPS to the Kyle ARM: dts: DBx500 cryp and hash uses power domain ARM: dts: ux500: Fix up the Janice NFC chip ARM: dts: ste: ux500: align SPI node name with dtschema Link: https://lore.kernel.org/r/CACRpkdaXmmZWsGdTG5tqNragkoefcTeUHjR+ZwNyNaa0S7s-7Q@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-14arm: dts: spear600: Add ssp controller nodesKory Maincent1-0/+30
The SPEAr600 has three Synchronous serial port to enables synchronous serial communication with slave or master peripherals (SPI). Lets add these nodes to be able to use them. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-14arm: dts: spear600: Fix clcd interruptKory Maincent1-1/+1
Interrupt 12 of the Interrupt controller belongs to the SMI controller, the right one for the display controller is the interrupt 13. Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes") Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-14Merge tag 'at91-dt-6.2' of ↵Arnd Bergmann3-5/+82
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt AT91 DT for 6.2 It contains: - interrupt support for ethernet PHYs on pcb8290 board - thermal management support for SAMA7G5 by adding OTP controller (that keeps temperature sensor calibration data), proper ADC bindings and describing thermal zones - securam node from SAMA7G5 is now described with generic name (sram) - remove of status = "okay" from SAM9X60-EK regulators * tag 'at91-dt-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9x60ek: remove status = "okay" for regulators ARM: dts: at91: sama7g5: use generic name for securam ARM: dts: at91: sama7g5: add thermal zones node ARM: dts: at91: sama7g5: add temperature sensor ARM: dts: at91: sama7g5: add cells for temperature calibration ARM: dts: at91: sama7g5: add io-channel-cells to adc node ARM: dts: at91: sama7g5: add otpc node ARM: dts: lan966x: Add interrupt support for PHYs on pcb8290 Link: https://lore.kernel.org/r/20221110115431.180908-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-14Merge tag 'dt-cleanup-6.2' of ↵Arnd Bergmann56-277/+274
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM DTS for v6.2 1. Aspeed: fix qcom,dc-scm-v1-bmc compatible in the bindings. 2. Marvell: include bindings in maintainers entry. 3. Cleanup DTS according to bindings (panel endpoint unit address, incorrect spi-max-frequency, generic node names). 4. Few indentation fixes. * tag 'dt-cleanup-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: dt-bindings: arm: aspeed: adjust qcom,dc-scm-v1-bmc compatible after rename ARM: dts: sunxi: correct indentation ARM: dts: omap: correct indentation ARM: dts: kirkwood: correct indentation ARM: dts: armada: correct indentation ARM: dts: ti: correct indentation ARM: dts: aspeed: align SPI node name with dtschema MAINTAINERS: ARM: marvell: include bindings ARM: dts: sunplus: sp7021: drop incorrect spi-max-frequency ARM: dts: am335x: drop panel endpoint unit address Link: https://lore.kernel.org/r/20221110092111.18581-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-14Merge tag 'at91-fixes-6.1' of ↵Arnd Bergmann2-1/+21
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 6.1 It contains: - signal name fix for a pin on SAMA7G5 - memory self-refresh fix for SAMA7G5 by avoid soft resetting AC DLL which can introduce glitches in RAM controller and lead to unexpected behavior - led support fix for lan966x-pcb8291 board by enabling sgpio node * tag 'at91-fixes-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: pm: avoid soft resetting AC DLL ARM: dts: lan966x: Enable sgpio on pcb8291 ARM: dts: at91: sama7g5: fix signal name of pin PB2 Link: https://lore.kernel.org/r/20221110115411.180876-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-14ARM: dts: imx: e60k02: Add touchscreenAndreas Kemnade3-1/+24
Add the touchscreen now, since the driver is available. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-14ARM: dts: imx6qdl-sabre: Add mmc aliasesDetlev Casanova1-0/+5
If not specified, the mmc0 and mmc1 devices will be the devices mmc@2190000 and mmc@2194000, which are in disabled state on the iMX.6 Sabrelite devices. The actual SD card reader devices are the ones at mmc@2198000 and mmc@219c000. Set aliases to use the correct mmc devices order. Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11ARM: dts: imx6ul/ull: suspend i.MX6UL watchdog in wait modeAndrej Picej1-0/+4
It was discovered that the watchdog triggers when the device is put into "Suspend-To-Idle"/"freeze" low-power mode. Setting WDW bit disables watchdog when the device is put into WAIT mode. Signed-off-by: Andrej Picej <andrej.picej@norik.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11ARM: dts: imx7: Fix NAND controller size-cellsMarek Vasut1-2/+2
The NAND controller size-cells should be 0 per DT bindings. Fix the following warning produces by DT bindings check: " nand-controller@33002000: #size-cells:0:0: 0 was expected nand-controller@33002000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) " Fix the missing space in node name too. Fixes: e7495a45a76de ("ARM: dts: imx7: add GPMI NAND and APBH DMA") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-10ARM: dts: bcm283x: Move ACT LED into separate dtsiStefan Wahren19-159/+164
The usage of the label property for gpio-leds has been deprecated a long time ago. In bcm2835-rpi.dtsi the ACT LED uses such a label and derive it to almost every Raspberry Pi board. Since we cannot break userspace interface this property must be kept. But we can move the ACT LED into a separate dtsi and include them from the board files. This change have two benefits: - with both new refs it's now clear the LED part is included from a dtsi - new boards do not include the deprecated stuff automatically Reported-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20221110173105.6633-3-stefan.wahren@i2se.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-11-10ARM: dts: bcm283x: Fix underscores in node namesStefan Wahren6-96/+96
A lot pinctrl node names, regulators and local_intc do not follow the node name convention to avoid underscore. So fix this by using hyphen or a proper node name. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221110173105.6633-2-stefan.wahren@i2se.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-11-10ARM: dts: BCM5301X: Correct description of TP-Link partitionsRafał Miłecki2-40/+10
TP-Link routers have flash space partitioned according to the partitions table. It may look like fixed partitioning but those partitions can be actually reorganized. New can be added (or some removed), offsets and sizes may change. Fix DT to use binding for the TP-Link SafeLoader partitioning method. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20221108110708.13693-1-zajec5@gmail.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-11-10ARM: dts: bcm47094: Add devicetree for D-Link DIR-890LLinus Walleij2-0/+212
This adds a device tree for the D-Link DIR-890L. This device is very similar to D-Link DIR-885L, the differences are detailed as a comment in the DTS file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221107134104.1422169-2-linus.walleij@linaro.org Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-11-10ARM: dts: bcm2835-rpi: Use firmware clocks for displayMaxime Ripard1-0/+17
We've experienced a number of issues around the cohabitation between the "real" clock driver in Linux and the one backed by the firmware. One solution around this is to follow what the RaspberryPi foundation in its downstream clock, which is also what we've been doing on the RaspberryPi4: to use the clocks exposed by the firmware. Link: https://lore.kernel.org/linux-clk/20221021140505.kjmw5x4s6qhnrfif@houat/ Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221026-rpi-display-fw-clk-v1-2-5c29b7a3d8b0@cerno.tech Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-11-10ARM: dts: bcm283x: Remove bcm2835-rpi-common.dtsi from SoC DTSIMaxime Ripard12-3/+9
According to the commit log of the commit 3ac395a5b3f3 ("ARM: dts: bcm283x: Use firmware PM driver for V3D"), the initial intent behind the bcm2835-rpi-common DTSI was to share data between the RaspberryPies based on the BCM2835, 36 and 37. However, it was included by these SoCs' main DTSI. This is creating an improper layering. On top of that, bcm2835.dtsi is being included by bcm2711.dtsi, which means that, even though the bcm2835-rpi-common DTSI wasn't actually meant to contain data for the BCM2711, it actually leaks into the BCM2711 DTSI. In order to remove both issues, let's remove the include of bcm2835-rpi-common.dtsi from bcm283{5-7}.dtsi and put them into the bcm283{6,7}-rpi.dtsi. BCM2835 has to be handled with special care due to the fact that bcm2835.dtsi is being included by bcm2711.dtsi. Thus, we chose to include bcm2835-rpi-common.dtsi directly into the board DTS. This will be more error-prone, but given that it's a fairly old SoC by now, the chance that we will get more BCM2835 boards is fairly low. BCM2711 isn't modified since the content of bcm2835-rpi-common.dtsi was only a power-domain for the v3d that was overridden anyway. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221026-rpi-display-fw-clk-v1-1-5c29b7a3d8b0@cerno.tech Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-11-10ARM: dts: qcom-msm8960-cdp: align TLMM pin configuration with DT schemaKrzysztof Kozlowski1-10/+9
DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> [bjorn: Fixed up expected typo in cs-pins function] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221109105140.48196-3-krzysztof.kozlowski@linaro.org
2022-11-10ARM: dts: qcom-msm8960: use define for interrupt constantsKrzysztof Kozlowski2-11/+13
Replace GIC_PPI, GIC_SPI and interrupt type numbers with appropriate defines. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221109105140.48196-2-krzysztof.kozlowski@linaro.org
2022-11-09ARM: dts: bcm53016: Add devicetree for D-Link DWL-8610APLinus Walleij2-0/+132
This adds a device tree for the BCM53016-based D-Link DWL-8610AP access point wireless router. The TRX-format partitions had to be named "firmware" due to an OpenWrt patch that only accepts parting such nodes if they are named "firmware". Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221019193449.3036010-2-linus.walleij@linaro.org Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-11-09ARM: dts: am335x-pcm-953: Define fixed regulators in root nodeDominik Haller1-15/+13
Remove the regulators node and define fixed regulators in the root node. Prevents the sdhci-omap driver from waiting in probe deferral forever because of the missing vmmc-supply and keeps am335x-pcm-953 consistent with the other Phytec AM335 boards. Fixes: bb07a829ec38 ("ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board") Signed-off-by: Dominik Haller <d.haller@phytec.de> Message-Id: <20221011143115.248003-1-d.haller@phytec.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-11-08ARM: dts: qcom-apq8060: align TLMM pin configuration with DT schemaKrzysztof Kozlowski1-75/+51
DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107185931.22075-2-krzysztof.kozlowski@linaro.org
2022-11-08ARM: dts: qcom: msm8226: Add MMCC nodeRayyan Ansari1-0/+8
Add a node for the Multimedia Clock Controller found on MSM8226. Signed-off-by: Rayyan Ansari <rayyan@ansari.sh> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221002122859.75525-2-matti.lehtimaki@gmail.com
2022-11-08ARM: dts: qcom: pm8941: fix iadc nodeLuca Weiss1-1/+1
The spmi-pmic bindings require the iadc node to be named just 'adc'. Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221031182456.952648-2-luca@z3ntu.xyz
2022-11-08ARM: dts: qcom: pm8941: fix vadc channel node namesLuca Weiss1-9/+16
The spmi-vadc bindings require the '@' in the node. Additionally change the node name to adc-chan which both makes it a generic node name and also removes the underscore from it. At the same time sort the nodes by reg value. Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221031181022.947412-2-luca@z3ntu.xyz
2022-11-08ARM: dts: qcom: pma8084: fix vadc channel node namesLuca Weiss1-6/+11
The spmi-vadc bindings require the '@' in the node. Additionally change the node name to adc-chan which both makes it a generic node name and also removes the underscore from it. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221031181022.947412-1-luca@z3ntu.xyz
2022-11-08ARM: dts: qcom: pm8941: rename misc node nameLuca Weiss1-1/+1
The spmi-pmic bindings is now using usb-detect@ for this node, so adjust the dts to match. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221031175717.942237-3-luca@z3ntu.xyz
2022-11-08ARM: dts: qcom: pm8941: adjust coincell node name to bindingsLuca Weiss1-1/+1
The spmi-pmic bindings say that pm8941-coincell should be called 'charger'. Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221031175119.939860-2-luca@z3ntu.xyz
2022-11-08ARM: dts: qcom: pm8226: fix regulators node nameLuca Weiss1-1/+1
Adjust the node name to match bindings and fix the validation warning. Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221031175119.939860-1-luca@z3ntu.xyz
2022-11-07ARM: dts: qcom: Drop MMCI interrupt-namesMarek Vasut4-12/+0
The pl18x MMCI driver does not use the interrupt-names property, the binding document has been updated to recommend this property be unused, remove it. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221013221242.218808-2-marex@denx.de
2022-11-07ARM: dts: qcom: mdm9615: drop unit ids from PMIC nodesDmitry Baryshkov1-1/+1
On MDM9615 the PMICs are connected using SSBI devices, which do not have any addressing scheme. Drop the unused unit ids from PMIC device nodes. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930212052.894834-2-dmitry.baryshkov@linaro.org
2022-11-07ARM: dts: qcom: sdx65: add dedicated IMEM and syscon compatiblesKrzysztof Kozlowski1-2/+2
Add proper compatibles to the IMEM device node: 1. syscon as required by the bindings, even though it is not currently used, 2. dedicated compatible as required for syscon and simple-mfd nodes. Align the node name to match IMEM type of device - SRAM. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221104190840.134733-2-krzysztof.kozlowski@linaro.org
2022-11-07ARM: dts: qcom: ipq8064: disable mmc-ddr-1_8v for sdcc1Christian Marangi1-1/+0
It was reported non working mmc with this option enabled. Both mmc for ipq8064 are supplied by a fixed 3.3v regulator so mmc can't be run at 1.8v. Disable it to restore correct functionality of this SoC feature. Tested-by: Hendrik Koerner <koerhen@web.de> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221024233817.27410-1-ansuelsmth@gmail.com
2022-11-07ARM: dts: qcom-msm8660: align RPM regulators node name with bindingsNeil Armstrong1-2/+2
Node names should be generic and new DT schema expects RPM regulators node to be just "regulators". Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221005-mdm9615-pinctrl-yaml-v3-5-e5e045644971@linaro.org
2022-11-07ARM: dts: qcom: mdm9615: wp8548-mangoh-green: fix sx150xq node names and ↵Neil Armstrong1-6/+6
probe-reset property Fix the sx150xq node names to pinctrl and use the right probe-reset property. Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221005-mdm9615-pinctrl-yaml-v3-2-e5e045644971@linaro.org
2022-11-07ARM: dts: qcom: mdm9615: align pinctrl subnodes with dt-schema bindingsNeil Armstrong2-15/+15
Align the MDM9615 DT to the expected subnodes namings in the dt-schema bindings. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221005-mdm9615-pinctrl-yaml-v3-1-e5e045644971@linaro.org
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 07:15:17 +0300