summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2023-01-23ARM: dts: exynos: align pin node names in Exynos4412Krzysztof Kozlowski1-1/+1
The DT schema expect pin configuration nodes to have pin prefix or suffix: exynos4412-trats2.dtb: pinctrl@3860000: sleep-state: 'gpz-0', 'gpz-1', 'gpz-2', 'gpz-3', 'gpz-4', 'gpz-5', 'gpz-6' do not match any of the regexes: '^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$', 'pinctrl-[0-9]+' Link: https://lore.kernel.org/r/20230120155404.323386-5-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-01-23ARM: dts: exynos: correct cd-gpios property in Exynos4412 Itop EliteKrzysztof Kozlowski1-1/+1
The property is cd-gpios: exynos4412-itop-elite.dtb: mmc@12530000: Unevaluated properties are not allowed ('cd-gpio' was unexpected) Link: https://lore.kernel.org/r/20230120155404.323386-4-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-01-23ARM: dts: exynos: drop unsupported desc-num in Exynos3250Krzysztof Kozlowski2-2/+0
There is no desc-num property for MMC nodes: exynos3250-monk.dtb: mmc@12510000: Unevaluated properties are not allowed ('desc-num' was unexpected) Link: https://lore.kernel.org/r/20230120155404.323386-3-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-01-23ARM: dts: exynos: correct wr-active property in Exynos3250 RinatoKrzysztof Kozlowski1-1/+1
The property is wr-active: exynos3250-rinato.dtb: fimd@11c00000: i80-if-timings: 'wr-act' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: b59b3afb94d4 ("ARM: dts: add fimd device support for exynos3250-rinato") Link: https://lore.kernel.org/r/20230120155404.323386-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-01-23ARM: dts: exynos: drop incorrect power-supplies in P4 NoteKrzysztof Kozlowski1-2/+0
simple-battery does not have supplies, but it is referenced by charger instead: exynos4412-p4note-n8010.dtb: battery-cell: 'power-supplies' does not match any of the regexes: '^ocv-capacity-table-[0-9]+$', 'pinctrl-[0-9]+' Link: https://lore.kernel.org/r/20230120071151.116272-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-01-23ARM: dts: exynos: align OPP table names with DT schemaKrzysztof Kozlowski6-37/+37
DT schema expects names of operating points tables to match certain pattern: exynos5422-odroidxu3-lite.dtb: opp-table0: $nodename:0: 'opp-table0' does not match '^opp-table(-[a-z0-9]+)?$' Link: https://lore.kernel.org/r/20230120064724.40621-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-01-23ARM: dts: renesas: Use new media bus type macrosLaurent Pinchart3-6/+13
Now that a header exists with macros for the media interface bus-type values, replace hardcoding numerical constants with the corresponding macros in the DT sources. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220615221410.27459-6-laurent.pinchart@ideasonboard.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-01-23ARM: dts: aspeed: bletchley: Enable wdtrst1Potin Lai1-0/+11
Enable WDTRST1 external signal to send a reset pulse to peripherals while BMC reset. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20221226054535.2836110-3-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-01-23ARM: dts: aspeed: bletchley: Rename flash1 labelPotin Lai1-1/+1
In OpenBMC phosphor-software-manager uses "alt-bmc" for the secondary flash label. Rename flash1 label to "alt-bmc" to support the dual image feature in OpenBMC. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20221226054535.2836110-2-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-01-23ARM: dts: aspeed: ethanolx: Add BIOS flash chipKonstantin Aladyshev1-0/+11
Add a BIOS flash chip to the DTS to open a possibility to reflash the main CPU BIOS from the BMC. Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Link: https://lore.kernel.org/r/20230111113934.1176-1-aladyshev22@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-01-23ARM: dts: aspeed: ethanolx: Enable CTS/RTS pins on UART1Konstantin Aladyshev1-1/+3
BMC UART1 is connected to the P0 CPU UART1. As the connection has CTS and RTS signals, enable these functions on the BMC side. Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Link: https://lore.kernel.org/r/20230111115227.1357-1-aladyshev22@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-01-23ARM: dts: aspeed: ethanolx: Add label for the master partitionKonstantin Aladyshev1-0/+1
Add label "bmc" for the flash master partition. The master partition is required for the firmware update in the OpenBMC ecosystem. Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Link: https://lore.kernel.org/r/20230111100105.707-1-aladyshev22@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-01-23ARM: dts: aspeed: ethanolx: Correct EEPROM device nameKonstantin Aladyshev1-1/+1
BMC on the EthanolX board uses 24LC128 EEPROM chip for the configuration settings. The correct compatible string for this chip is "atmel,24c128". Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Link: https://lore.kernel.org/r/20230111113208.964-1-aladyshev22@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-01-23ARM: dts: aspeed: ethanolx: Enable VUARTKonstantin Aladyshev1-0/+7
Enable Virtual UART (VUART) module. This module provides virtual serial communication capabilities between host CPU and BMC and can be used for the Serial-Over-LAN (SoL) feature implementation. Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Link: https://lore.kernel.org/r/20230111121917.1636-1-aladyshev22@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-01-23ARM: dts: aspeed: greatlakes: Add Facebook greatlakes (AST2600) BMCDelphine CC Chiu2-0/+242
Add linux device tree entry related to greatlakes specific devices connected to BMC SoC. Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> Link: https://lore.kernel.org/r/20221111034828.2377-3-Delphine_CC_Chiu@Wiwynn.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-01-20ARM: dts: meson8: align OPP table names with DT schemaKrzysztof Kozlowski2-2/+2
DT schema expects names of operating points tables to match certain pattern: meson8-minix-neo-x8.dtb: gpu-opp-table: $nodename:0: 'gpu-opp-table' does not match '^opp-table(-[a-z0-9]+)?$' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230120072108.138598-1-krzysztof.kozlowski@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-20Merge tag 'at91-fixes-6.2' of ↵Arnd Bergmann1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 6.2: It contains: - fix the clock provided via DT for DDR controller on SAM9X60 * tag 'at91-fixes-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9x60: fix the ddr clock for sam9x60 Link: https://lore.kernel.org/r/20230119112101.42045-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-20Merge tag 'stm32-dt-for-v6.2-fixes-1' of ↵Arnd Bergmann4-8/+24
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v6.2, round 1 Highlights: ----------- -STM32MP15: - Fix missing chip select phandle in several stm32mp15x based boards. * tag 'stm32-dt-for-v6.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argon ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som Link: https://lore.kernel.org/r/3fe26bf9-297b-5c78-682b-37fa6d8b6190@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-19ARM: dts: amlogic: Used onboard usb hub reset to enable usb hubAnand Moon1-13/+11
On Odroid c1 previously use gpio-hog to reset the usb hub, switch to used on board usb hub reset to enable the usb hub and enable power to usb hub. Add usb hub regulator as per the schematic. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230118044418.875-3-linux.amoon@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19ARM: zynq: Use recommended dma-controller name instead of dmacMichal Simek1-1/+1
Use standard name for dma controller. Issue is reported by dtbs_check as dmac@f8003000: $nodename:0: 'dmac@f8003000' does not match '^dma-controller(@.*)?$' Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/5637d7e3464fbc1b2b269a7df35e24edc2c8d4ac.1672908080.git.michal.simek@amd.com
2023-01-19ARM: dts: zynq: Add xlnx prefix to GEM compatible stringHarini Katakam1-2/+2
cdns,zynq/zynqmp/versal-gem was recently deprecated in Linux in favour of xlnx prefix. Add this new compatible string and remove the existing cdns,zynq-gem compatible string. Signed-off-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/7768d5d68fe38dd8e9300e9c6e09c228e79b2862.1672909533.git.michal.simek@amd.com
2023-01-19ARM: zynq: Comment interrupt names IRQs for pl330Michal Simek1-2/+4
pl330 DT yaml description doesn't define interrupt-names property that's why comment it but keep it as comment. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/8e5a921c16efe09030fda036340186c11dd990bf.1672908030.git.michal.simek@amd.com
2023-01-19ARM: dts: omap: gta04a5: cleanup i2c node namesAndreas Kemnade1-3/+3
Use generic node names. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Message-Id: <20230117223059.2609390-1-andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-01-19ARM: dts: omap: gta04: add BNO055 IMU chipAndreas Kemnade1-0/+13
There is finally a driver upstreamed, so add the device. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Message-Id: <20230117223002.2609301-1-andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-01-19ARM: dts: n900: use iio driver for accelerometerSicelo A. Mhlongo1-44/+8
The accelerometer in the N900 is supported by the iio-framework since commit 8a7449d68670a8f9 ("iio: accel: add support for LIS302DL variant). This commit switches to it and updates node properties to match the bindings of the new compatible. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com> Message-Id: <20221229171348.3543327-3-absicsz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-01-19ARM: dts: n900: rename accelerometer nodeSicelo A. Mhlongo1-1/+1
Use generic node naming for lis302dl accelerometer, and drop its label that is not used anywhere else. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com> Message-Id: <20221229171348.3543327-2-absicsz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-01-19ARM: dts: am335x-nano: Enable USB hostMark Jackson1-0/+4
Add missing entry to enable the USB host. Signed-off-by: Mark Jackson <mpfj@newflow.co.uk> Message-Id: <20221130140547.295859-6-mpfj@newflow.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-01-19ARM: dts: am335x-nano: Fix GPIO settings for MMC pinsMark Jackson1-2/+3
The MMC slot uses GPIO pins for Write Protext and Card Detect. Define these so everything works correctly. Signed-off-by: Mark Jackson <mpfj@newflow.co.uk> Message-Id: <20221130140547.295859-5-mpfj@newflow.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-01-19ARM: dts: am335x-nano: Enable I2C temperature sensorMark Jackson1-0/+5
The NanoBone platform supports a temperature sensor on the I2C bus. Signed-off-by: Mark Jackson <mpfj@newflow.co.uk> Message-Id: <20221130140547.295859-4-mpfj@newflow.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-01-19ARM: dts: am335x-nano: Enable RS485 mode for UART3 & 4Mark Jackson1-0/+10
UART3 & 4 are both RS485 ports. So we need to configure and enable this by default. Signed-off-by: Mark Jackson <mpfj@newflow.co.uk> Message-Id: <20221130140547.295859-3-mpfj@newflow.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-01-19ARM: dts: am335x-nano: Fix GPIO settings for RTS/CTS pins on UART3 & 4Mark Jackson1-4/+4
The NanoBone platform uses GPIO pins for RTS/CTS control. The DTS still uses the hardware RTS/CTS pins so this needs fixing. Signed-off-by: Mark Jackson <mpfj@newflow.co.uk> Message-Id: <20221130140547.295859-2-mpfj@newflow.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-01-19ARM: dts: ti: Fix pca954x i2c-mux node namesGeert Uytterhoeven1-2/+2
"make dtbs_check": arch/arm/boot/dts/am3874-iceboard.dtb: pca9548@70: $nodename:0: 'pca9548@70' does not match '^(i2c-?)?mux' From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml arch/arm/boot/dts/am3874-iceboard.dtb: pca9548@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4', 'i2c@5', 'i2c@6', 'i2c@7' were unexpected) From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml ... Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Message-Id: <bc964109db8a5f29124580165e925bd3bfe36661.1669999298.git.geert+renesas@glider.be> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-01-19ARM: dts: omap: Use new media bus type macrosLaurent Pinchart1-2/+3
Now that a header exists with macros for the media interface bus-type values, replace hardcoding numerical constants with the corresponding macros in the DT sources. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Message-Id: <20220615221410.27459-5-laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-01-19ARM: dts: meson8b: Add more L2 (PL310) cache propertiesMartin Blumenstingl1-0/+3
Add more L2 cache properties which are used by the 3.10 vendor kernel but have not made it upstream yet. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230114233455.2005047-3-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-19ARM: dts: meson8: Add more L2 (PL310) cache propertiesMartin Blumenstingl1-0/+3
Add more L2 cache properties which are used by the 3.10 vendor kernel but have not made it upstream yet. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230114233455.2005047-2-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-19ARM: dts: qcom: msm8226: add RPMCC nodeRayyan Ansari1-0/+7
Add a node for the RPM Clock Controller on MSM8226. Signed-off-by: Rayyan Ansari <rayyan@ansari.sh> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230118181343.438373-1-rayyan@ansari.sh
2023-01-19ARM: dts: qcom: apq8084: add clocks and clock-names to gcc deviceDmitry Baryshkov1-0/+18
Add clocks and clock-names nodes to the gcc device to bind clocks using the DT links. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230111060402.1168726-13-dmitry.baryshkov@linaro.org
2023-01-19ARM: dts: qcom: align OPP table node name with DT schemaKrzysztof Kozlowski2-20/+20
Bindings expect OPP tables to start with "opp-table". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230109112221.102473-1-krzysztof.kozlowski@linaro.org
2023-01-19ARM: dts: qcom: rename mdp nodes to display-controllerDmitry Baryshkov2-2/+2
Follow the schema change and rename mdp nodes to generic name 'display-controller'. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230109051402.317577-7-dmitry.baryshkov@linaro.org
2023-01-19ARM: dts: qcom-msm8974: rename mdss node to display-subsystemDmitry Baryshkov1-1/+1
Follow the schema change and rename mdss node to generic name 'display-subsystem'. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230109051402.317577-5-dmitry.baryshkov@linaro.org
2023-01-19ARM: dts: qcom-msm8974: add SoC specific compat string to mdp5 nodeDmitry Baryshkov1-1/+1
Add SoC-specific compat string to the MDP5 device node to ease distinguishing between various platforms. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230109050152.316606-4-dmitry.baryshkov@linaro.org
2023-01-19ARM: dts: qcom: use qcom,gsi-loader for IPAAlex Elder2-4/+4
Depending on the platform, either the modem or the AP must load GSI firmware for IPA before it can be used. To date, this has been indicated by the presence or absence of a "modem-init" property. That mechanism has been deprecated. Instead, we indicate how GSI firmware should be loaded by the value of the "qcom,gsi-loader" property. Update all ARM platforms that use IPA to use the "qcom,gsi-loader" property to specify how the GSI firmware is loaded. Update the affected nodes so the status property is last. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221231002716.2367375-2-elder@linaro.org
2023-01-19ARM: dts: qcom-apq8084: specify per-sensor calibration cellsDmitry Baryshkov1-6/+307
Specify pre-parsed per-sensor calibration nvmem cells in the tsens device node rather than parsing the whole data blob in the driver. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230101194034.831222-21-dmitry.baryshkov@linaro.org
2023-01-19ARM: dts: qcom-msm8974: specify per-sensor calibration cellsDmitry Baryshkov1-6/+307
Specify pre-parsed per-sensor calibration nvmem cells in the tsens device node rather than parsing the whole data blob in the driver. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230101194034.831222-20-dmitry.baryshkov@linaro.org
2023-01-19Merge tag 'qcom-dts-fixes-for-6.2' into dts-for-6.3Bjorn Andersson2-12/+12
Qualcomm ARM32 DTS fix for 6.2 This fixes a regression on Inforce 6540, as the sdhci nodes no longer overrides the platform's mmc nodes.
2023-01-17ARM: dts: r9a06g032: Add the USBF controller nodeHerve Codina1-0/+12
Add the USBF controller available in the r9a06g032 SoC. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230105152257.310642-5-herve.codina@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17ARM: dts: stm32: Use new media bus type macrosLaurent Pinchart2-2/+4
Now that a header exists with macros for the media interface bus-type values, replace hardcoding numerical constants with the corresponding macros in the DT sources. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-01-17ARM: dts: stm32: Fix User button on stm32mp135f-dkAmelie Delaunay1-1/+1
This patch fixes the following dtbs_check warning on stm32mp135f-dk: arch/arm/boot/dts/stm32mp135f-dk.dtb: gpio-keys: 'user-pa13' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/input/gpio-keys.yaml It renames user-pa13 node into button-user so that it matches gpio-keys bindings. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-01-17ARM: dts: stm32: add timers support on stm32mp135f-dkOlivier Moysan1-0/+58
Configure timers support on stm32mp135f-dk. The timers TIM3, TIM4, TIM8 & TIM14 which can be used on expansion GPIO connector are disabled by default. Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-01-17ARM: dts: stm32: add timer pins muxing for stm32mp135f-dkOlivier Moysan1-0/+60
Add timer pins muxing for stm32mp135f-dk board. Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 06:40:08 +0300