summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2023-03-14ARM: dts: qcom: ipq4019: remove clk-output-names for sleep clockRobert Marko1-1/+0
Now that sleep clock is being passed directly to GCC, there is no need for global name matching, so remove clk-output-names for sleep clock. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230214162325.312057-4-robert.marko@sartura.hr
2023-03-14ARM: dts: qcom: ipq4019: pass XO and sleep clocks to GCCRobert Marko1-0/+2
Directly pass XO and sleep clocks to GCC via phandles. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230214162325.312057-3-robert.marko@sartura.hr
2023-03-14ARM: dts: qcom: ipq4018-ap120c-ac: use NVMEM for ath10k caldataRobert Marko1-0/+15
Since ath10k now supports loading the pre-cal via NVMEM instead of having to use userspace scripts, lets use it. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230214161211.306462-4-robert.marko@sartura.hr
2023-03-14ARM: dts: qcom: ipq4018-ap120c-ac: align SPI-NAND with DT schemaRobert Marko1-1/+1
SPI-NAND node name should be flash@1 and not nand@1 according to schema. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230214161211.306462-3-robert.marko@sartura.hr
2023-03-14ARM: dts: qcom: ipq4018-ap120c-ac: align GPIO hog with DT schemaRobert Marko1-1/+1
Align USB power GPIO hog node to DT schema. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230214161211.306462-2-robert.marko@sartura.hr
2023-03-14ARM: dts: qcom: ipq4018-ap120c-ac: setup serial consoleRobert Marko1-0/+8
Add the required alias and stdout property so that kernel can setup the console based off DTS and not have to set it in the cmdline. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230214161211.306462-1-robert.marko@sartura.hr
2023-03-13ARM: dts: imx6dl-yapp4: Use reset-gpios property nameMichal Vokáč1-1/+1
Use the gpios instead of gpio suffix that is mandated by the binding. This dtbs_check warning is fixed now: touchscreen@5c: Unevaluated properties are not allowed ('reset-gpio' was unexpected) The reset signal worked correctly as both the "gpio" and "gpios" suffixes are actually allowed by the gpiolib. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-12ARM: dts: exynos: fix MCT compatible in Universal C210Krzysztof Kozlowski1-1/+1
When desired, nodes should be disabled instead of changing their compatible to a fake one: exynos4210-universal_c210.dtb: /soc/timer@10050000: failed to match any schema with compatible: ['none'] Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20230221161653.56574-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-12ARM: dts: hisilicon: use "okay" for statusKrzysztof Kozlowski2-7/+7
"okay" over "ok" is preferred for status property. Link: https://lore.kernel.org/r/20230127101834.93818-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-12ARM: dts: ti: use "okay" for statusKrzysztof Kozlowski5-5/+5
"okay" over "ok" is preferred for status property. Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230127101836.93845-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-12ARM: dts: marvell: use "okay" for statusKrzysztof Kozlowski2-2/+2
"okay" over "ok" is preferred for status property. Link: https://lore.kernel.org/r/20230127101839.93873-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-12ARM: dts: omap: align UART node name with bindingsKrzysztof Kozlowski1-4/+4
Bindings expect UART/serial node names to be "serial". Link: https://lore.kernel.org/r/20230123151531.369419-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-10ARM: dts: aspeed: bonnell: Update eeprom sizeEddie James1-1/+1
An eeprom had an incorrect size. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-03-10ARM: dts: aspeed: bonnell: Remove MAC3Eddie James1-10/+0
Bonnell is populated with only one ethernet controller. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20230308222403.1848795-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-03-10ARM: dts: aspeed: everest: Add reserved memory for TPM event logEddie James1-0/+6
Trusted boot support requires the platform event log passed up from the bootloader. In U-Boot, this can now be accomplished with a reserved memory region, so add a region for this purpose to the Everest BMC devicetree. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20230222015056.3903734-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-03-09ARM: dts: qcom: apq8026-lg-lenok: add missing reserved memoryLuca Weiss1-0/+10
Turns out these two memory regions also need to be avoided, otherwise weird things will happen when Linux tries to use this memory. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-lenok-reserved-memory-v1-1-b8bf6ff01207@z3ntu.xyz
2023-03-09ARM: dts: aspeed: mtmitchell: Enable NCSIChanh Nguyen1-1/+36
Use MAC3 (RGMII4) with the NC-SI stack instead of as an MDIO PHY. The OCP slot #0 and OCP slot #1 use a common BMC_NCSI signal, so we use only one of them at a time. The OCP slot #0 will be enabled by PCA9539's setting by default. Enable the OCP Auxiliary Power during booting to make the NCSI feature work. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20230228102820.18477-1-chanh@os.amperecomputing.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-03-07ARM: dts: rockchip: fix a typo error for rk3288 spdif nodeJianqun Xu1-1/+1
Fix the address in the spdif node name. Fixes: 874e568e500a ("ARM: dts: rockchip: Add SPDIF transceiver for RK3288") Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Reviewed-by: Sjoerd Simons <sjoerd@collabora.com> Link: https://lore.kernel.org/r/20230208091411.1603142-1-jay.xu@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-03-06arm: dts: mt7623: disable home key on Bananapi BPI-R2Arınç ÜNAL1-0/+6
There's no home key on Bananapi BPI-R2. Disable it. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20230212121354.44590-1-arinc.unal@arinc9.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-03-06arm: dts: mediatek: Fix existing NAND controller node nameXiangsheng Hou1-1/+1
Change the existing node name in order to match NAND controller DT bindings. Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230201021500.26769-4-xiangsheng.hou@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-03-06ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250Krzysztof Kozlowski1-13/+11
The DisplayPort and MIPI phys are actually part of the Power Management Unit system controller. They do not have their own address space, thus keeping the nodes under soc causes warnings: exynos5250-arndale.dtb: soc: video-phy-0: {'compatible': ['samsung,exynos5250-dp-video-phy'], 'samsung,pmu-syscon': [[20]], '#phy-cells': [[0]], 'phandle': [[24]]} should not be valid under {'type': 'object'} Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20230127194057.186458-8-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-06ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5420Krzysztof Kozlowski1-13/+11
The DisplayPort and MIPI phys are actually part of the Power Management Unit system controller. They do not have their own address space, thus keeping the nodes under soc causes warnings: exynos5420-smdk5420.dtb: soc: dp-video-phy: {'compatible': ['samsung,exynos5420-dp-video-phy'], 'samsung,pmu-syscon': [[11]], '#phy-cells': [[0]], 'phandle': [[16]]} should not be valid under {'type': 'object'} Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20230127194057.186458-7-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-06ARM: dts: exynos: move MIPI phy to PMU node in Exynos4Krzysztof Kozlowski2-8/+7
The MIPI phy is actually part of the Power Management Unit system controller. It does not have its own address space, thus keeping the node under soc causes warnings: xynos4412-i9305.dtb: soc: video-phy: {'compatible': ['samsung,s5pv210-mipi-video-phy'], '#phy-cells': [[1]], 'syscon': [[11]], 'phandle': [[13]]} should not be valid under {'type': 'object'} Link: https://lore.kernel.org/r/20230207192851.549242-3-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-06ARM: dts: exynos: move MIPI phy to PMU node in Exynos3250Krzysztof Kozlowski1-6/+5
The MIPI phy is actually part of the Power Management Unit system controller. It does not have its own address space, thus keeping the node under soc causes warnings: exynos3250-artik5-eval.dtb: soc: video-phy: {'compatible': ['samsung,s5pv210-mipi-video-phy'], '#phy-cells': [[1]], 'syscon': [[15]], 'phandle': [[23]]} should not be valid under {'type': 'object'} Link: https://lore.kernel.org/r/20230207192851.549242-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-06ARM: dts: exynos: drop unused samsung,camclk-out property in MidasKrzysztof Kozlowski1-1/+0
The S5K6A3 camera sensor does not use nor allow samsung,camclk-out property. Link: https://lore.kernel.org/r/20230211134731.85957-3-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-06ARM: dts: s5pv210: correct MIPI CSIS clock nameKrzysztof Kozlowski1-1/+1
The Samsung S5P/Exynos MIPI CSIS bindings and Linux driver expect first clock name to be "csis". Otherwise the driver fails to probe. Fixes: 94ad0f6d9278 ("ARM: dts: Add Device tree for s5pv210 SoC") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230212185818.43503-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-06ARM: dts: exynos: correct whitespace in MidasKrzysztof Kozlowski1-2/+1
Correct indentation and whitespace in Exynos4412 Midas board. Link: https://lore.kernel.org/r/20230212185818.43503-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-06ARM: dts: exynos: fix WM8960 clock name in Itop EliteKrzysztof Kozlowski1-1/+1
The WM8960 Linux driver expects the clock to be named "mclk". Otherwise the clock will be ignored and not prepared/enabled by the driver. Cc: <stable@vger.kernel.org> Fixes: 339b2fb36a67 ("ARM: dts: exynos: Add TOPEET itop elite based board") Link: https://lore.kernel.org/r/20230217150627.779764-3-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-06ARM: dts: exynos: add ports to TC358764 bridge on ArndaleKrzysztof Kozlowski1-6/+9
The Toshiba TC358764 bridge binding expect up two ports as it is a bridge, thus add ports property to encapsulate them. Link: https://lore.kernel.org/r/20230225160252.18737-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-06ARM: dts: exynos: drop fake align STMPE properties in P4 NoteKrzysztof Kozlowski1-2/+0
From STMPE device node in P4 Note remove unused irq-trigger property and incorrectly placed interrupt-controller (which would be a property of GPIO child). Link: https://lore.kernel.org/r/20230225164050.42522-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-06ARM: dts: exynos: align STMPE ADC node name with bindings in P4 NoteKrzysztof Kozlowski1-1/+1
The node name should be generic thus rename STMPE ADC child to "adc". Bindings will expect such name as well. Link: https://lore.kernel.org/r/20230225164050.42522-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-06arm: dts: meson: adjust order of some compatiblesHeiner Kallweit1-2/+2
During review of a new yaml binding, affecting these dts, it turned out that some compatibles aren't ordered as they should be. Order should be most specific to least specific. Suggested-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/66f77c32-2678-3e31-fb00-1294ccaa6045@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06ARM: dts: imx6ul-prti6g: configure ethernet reference clock parentOleksij Rempel1-6/+8
On this board the PHY is the ref clock provider. So, configure ethernet reference clock as input. Without this patch we have relatively high amount of dropped packets. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06ARM: dts: imx6ul: set enet_clk_ref to CLK_ENETx_REF_SELOleksij Rempel1-6/+4
IMX6UL_CLK_ENETx_REF is behind of CLK_ENETx_REF_SEL: FEC MAC <---------- CLK_ENETx_REF_SEL <--------- CLK_ENETx_REF \ ^------<-> CLK_ENETx_REF_PAD We should point to the clock selector instead. So, we will be able to use external clock source from CLK_ENETx_REF_PAD as well. At same time, remove enet_out clk. It is using always the same clock as enet_clk_ref and do not help to solve any challenges of this HW. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06ARM: dts: imx6dl-eckelmann-ci4x10: configure ethernet reference clock parentOleksij Rempel1-5/+8
On this board the PHY is the ref clock provider. So, configure ethernet reference clock as input. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06ARM: dts: imx6qdl-skov-cpu: configure ethernet reference clock parentOleksij Rempel1-4/+8
On this board the PHY is the ref clock provider. So, configure ethernet reference clock as input. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06ARM: dts: imx6q-prtwd2: configure ethernet reference clock parentOleksij Rempel1-3/+14
On this board the PHY is the ref clock provider. So, configure ethernet reference clock as input. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06ARM: dts: imx6dl-victgo: configure ethernet reference clock parentOleksij Rempel1-4/+8
On this board the PHY is the ref clock provider. So, configure ethernet reference clock as input. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06ARM: dts: imx6dl-prtmvt: configure ethernet reference clock parentOleksij Rempel1-6/+5
On this board the PHY is the ref clock provider. So, configure ethernet reference clock as input. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06ARM: dts: imx6dl-plym2m: configure ethernet reference clock parentOleksij Rempel1-4/+8
On this board the PHY is the ref clock provider. So, configure ethernet reference clock as input. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06ARM: dts: imx6dl-plybas: configure ethernet reference clock parentOleksij Rempel1-4/+8
On this board the PHY is the ref clock provider. So, configure ethernet reference clock as input. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06ARM: dts: imx6dl-alti6p: configure ethernet reference clock parentOleksij Rempel1-4/+8
On this board the PHY is the ref clock provider. So, configure ethernet reference clock as input. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06ARM: dts: imx6dl-lanmcu: configure ethernet reference clock parentOleksij Rempel1-4/+8
On this board the PHY is the ref clock provider. So, configure ethernet reference clock as input. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06ARM: dts: imx6qdl: use enet_clk_ref instead of enet_out for the FEC nodeOleksij Rempel1-2/+2
Old imx6q machine code makes RGMII/RMII clock direction decision based on configuration of "ptp" clock. "enet_out" is not used and make no real sense, since we can't configure it as output or use it as clock provider. Instead of "enet_out" use "enet_clk_ref" which is actual selector to choose between internal and external clock source: FEC MAC <---------- enet_clk_ref <--------- SoC PLL \ ^------<-> refclock PAD (bi directional) Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06ARM: dts: imx7d: add node for PXPMichael Tretter1-0/+9
The i.MX7d contains a Pixel Pipeline in version 3.0. Add the device tree node to make it available. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06ARM: dts: aspeed: asrock: Correct firmware flash SPI clocksZev Weiss2-2/+2
While I'm not aware of any problems that have occurred running these at 100 MHz, the official word from ASRock is that 50 MHz is the correct speed to use, so let's be safe and use that instead. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Cc: stable@vger.kernel.org Fixes: 2b81613ce417 ("ARM: dts: aspeed: Add ASRock E3C246D4I BMC") Fixes: a9a3d60b937a ("ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC") Link: https://lore.kernel.org/r/20230224000400.12226-4-zev@bewilderbeest.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-03-06ARM: dts: aspeed: e3c246d4i: Add PECI deviceZev Weiss1-0/+4
Now that we've got driver support for it, we might as well enable and use it. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20230224000400.12226-3-zev@bewilderbeest.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-03-06ARM: dts: aspeed: romed8hm3: Fix GPIO polarity of system-fault LEDZev Weiss1-1/+1
Turns out it's in fact not the same as the heartbeat LED. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Cc: stable@vger.kernel.org # v5.18+ Fixes: a9a3d60b937a ("ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC") Link: https://lore.kernel.org/r/20230224000400.12226-2-zev@bewilderbeest.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-02-27Merge tag 'arm-fixes-6.3-1' of ↵Linus Torvalds10-18/+16
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A few bugfixes already came up during the merge window. Samsung, ASpeed, Spear have minor DT changes, in case of Samsung this fixes a regression compared to earlier versions. Bartosz takes over as the primary maintainer for the TI DaVinci platform, and we get a few last minute defconfig changes" * tag 'arm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: spear320-hmi: correct STMPE GPIO compatible ARM: dts: aspeed: p10bmc: Update battery node name arm64: defconfig: Add IOSCHED_BFQ to the default configs arm64: defconfig: Fix unintentional disablement of PCI on i.MX ARM: dts: exynos: correct TMU phandle in Odroid XU3 family ARM: dts: exynos: correct TMU phandle in Odroid HC1 ARM: dts: exynos: correct TMU phandle in Odroid XU ARM: dts: exynos: correct TMU phandle in Exynos5250 ARM: dts: exynos: correct TMU phandle in Exynos4210 ARM: dts: exynos: correct TMU phandle in Exynos4 MAINTAINERS: make me the maintainer of DaVinci platforms
2023-02-27Merge tag 'samsung-dt-fixes-6.3' of ↵Arnd Bergmann6-14/+12
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes Fixes for Samsung DTS ARM for v6.3 Thermal framework commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization") merged in v6.1-rc1, exposed misconfiguration of Exynos Thermal Monitoring Unit (TMU) thermal-sensors property in DTS. This misconfiguration in DTS was working fine before that Thermal commit, but now all thermal zones fail to register except the first one (CPU). This can lead to missing cooling of a board and eventually either emergency shutdown or damaged board. * tag 'samsung-dt-fixes-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: correct TMU phandle in Odroid XU3 family ARM: dts: exynos: correct TMU phandle in Odroid HC1 ARM: dts: exynos: correct TMU phandle in Odroid XU ARM: dts: exynos: correct TMU phandle in Exynos5250 ARM: dts: exynos: correct TMU phandle in Exynos4210 ARM: dts: exynos: correct TMU phandle in Exynos4 Link: https://lore.kernel.org/r/20230221095337.9453-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 22:07:11 +0300