summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2020-03-24ARM: dts: mmp*: Make the serial ports compatible with xscale-uartLubomir Rintel2-8/+8
XScale serial port driver is perfectly capable of supporting this hardware. A separate compatible string is probably a historical mess. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200320174107.29406-7-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24ARM: dts: mmp*: Fix serial port namesLubomir Rintel2-8/+8
A preferred node name for serial ports is "serial": mmp2-olpc-xo-1-75.dt.yaml: uart@d4030000: $nodename:0: 'uart@d4030000' does not match '^serial(@[0-9a-f,]+)*$' ... Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200320174107.29406-6-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24ARM: dts: mmp2-brownstone: Don't redeclare phandle referencesLubomir Rintel1-167/+165
Extend the nodes by their phandle references instead of recreating the tree and declaring references of the same names. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200320174107.29406-5-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24ARM: dts: pxa*: Make the serial ports compatible with xscale-uartLubomir Rintel2-6/+12
Some drivers that claim to support mrvl,mmp-uart default to a reg-shift of two, some don't. Be explicit to be on a safe side. With that in place, a XScale serial port driver is perfectly capable of supporting the MMP serial port. Add a compatible string. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200320174107.29406-4-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24ARM: dts: pxa*: Fix serial port namesLubomir Rintel2-6/+6
There's a preferred node name for serial ports, and it's not "uart": pxa910-dkb.dt.yaml: uart@d4017000: $nodename:0: 'uart@d4017000' does not match '^serial(@[0-9a-f,]+)*$' ... Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200320174107.29406-3-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24ARM: dts: pxa*: Don't redeclare phandle referencesLubomir Rintel2-157/+153
Extend the nodes by their phandle references instead of recreating the tree and declaring references of the same names. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200320174107.29406-2-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-23ARM: dts: oxnas: Fix clear-mask propertySungbo Eo2-4/+4
Disable all rps-irq interrupts during driver initialization to prevent an accidental interrupt on GIC. Fixes: 84316f4ef141 ("ARM: boot: dts: Add Oxford Semiconductor OX810SE dtsi") Fixes: 38d4a53733f5 ("ARM: dts: Add support for OX820 and Pogoplug V3") Signed-off-by: Sungbo Eo <mans0n@gorani.run> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-03-23ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitationsNicolas Saenz Julienne1-0/+1
The bus is virtual and devices have to inherit their DMA constraints from the underlying interconnect. So add an empty dma-ranges property to the bus node, implying the firmware bus' DMA constraints are identical to its parent's. Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-03-21ARM: dts: at91: sama5d27_wlsom1_ek: add USB device nodeCristian Birsan1-0/+12
Add USB device node for WLSoM1 EK and enable it. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> [eugen.hristev@microchip.com: ported to 5.4] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20200318104236.21114-1-eugen.hristev@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-03-21ARM: dts: gemini: Add thermal zone to DIR-685Linus Walleij1-3/+45
The DIR-685 can now exploit the thermal zone added by the drive temperature sensor inside the hard drive. We have patched the libata subsystem to assign the device nodes properly to the SCSI devices and this is what the drivetemp driver will use to populate the sensor and the thermal zone, so pick that up into the thermal zone and let this control the fan. The hardware lacks an embedded temperature sensor so the D-Link vendor firmware uses this method to control the temperature of the NAS enclosure using the thermal sensor inside the hard drive. The drive temperature trigger points to be used comes from the vendor firmware. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-21ARM: dts: gemini: Rename IDE nodesLinus Walleij6-9/+13
By renaming the ATA drive nodes to "ide@" we activate the semantic checks to the DT schema for the controller and use the correct notation for PATA drives. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-20ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodesDalon Westergreen1-6/+6
The ptp_ref clock for Arria10 defaults to using the peripheral pll emac ptp clock. Without the ptp_ref clock in the gmac nodes the driver defaults to the gmac main clock resulting in an incorrect period for the ptp counter. Signed-off-by: Dalon Westergreen <dalon.westergreen@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-03-20ARM: dts: sunxi: Fix dtc 'dma-ranges' warningsRob Herring3-0/+6
'#address-cells' and '#size-cells' are needed in the same node (for the child bus) as 'dma-ranges' in order to parse it. The kernel is more lax and will walk up the tree to get the properties from a parent node, but it's better to be explicit. dtc now does checks on 'dma-ranges' and is more strict: arch/arm/boot/dts/sun5i.dtsi:189.4-52: Warning (dma_ranges_format): \ /soc/dram-controller@1c01000:dma-ranges: "dma-ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1) arch/arm/boot/dts/sun8i-r40.dtsi:742.4-52: Warning (dma_ranges_format): \ /soc/dram-controller@1c62000:dma-ranges: "dma-ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1) arch/arm/boot/dts/sunxi-h3-h5.dtsi:563.4-52: Warning (dma_ranges_format): \ /soc/dram-controller@1c62000:dma-ranges: "dma-ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1) Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-17ARM: dts: omap5: Add bus_dma_limit for L3 busRoger Quadros1-0/+1
The L3 interconnect's memory map is from 0x0 to 0xffffffff. Out of this, System memory (SDRAM) can be accessed from 0x80000000 to 0xffffffff (2GB) OMAP5 does support 4GB of SDRAM but upper 2GB can only be accessed by the MPU subsystem. Add the dma-ranges property to reflect the physical address limit of the L3 bus. Cc: stable@kernel.org Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-17ARM: dts: omap4-droid4: Fix lost touchscreen interruptsTony Lindgren1-1/+1
Looks like we can have the maxtouch touchscreen stop producing interrupts if an edge interrupt is lost. This can happen easily when the SoC idles as the gpio controller may not see any state for an edge interrupt if it is briefly triggered when the system is idle. Also it looks like maxtouch stops sending any further interrupts if the interrupt is not handled. And we do have several cases of maxtouch already configured with a level interrupt, so let's do that. With level interrupt the gpio controller has the interrupt state visible after idle. Note that eventually we will probably also be using the Linux generic wakeirq configured for the controller, but that cannot be done until the maxtouch driver supports runtime PM. Cc: maemo-leste@lists.dyne.org Cc: Arthur Demchenkov <spinal.by@gmail.com> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-17ARM: OMAP2+: Drop legacy platform data for ti81xx edmaTony Lindgren2-10/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-17ARM: dts: Configure interconnect target module for ti816x edmaTony Lindgren1-18/+135
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure edma for dm816x similar to what we have for dm814x. Let's initially keep the legacy "ti,hwmods" peroperty, it will be removed for all ti81xx in a later patch. Note that as we now also start using the clkctrl clock binding on dm816x, the board specific dts files must also have compatible "ti,dm816". This is needed for the clkctrl clocks to probe properly, so any out of tree dts files may need to be updated accordingly. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-17ARM: dts: Configure interconnect target module for dm814x tptc3Tony Lindgren1-5/+21
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-17ARM: dts: Configure interconnect target module for dm814x tptc2Tony Lindgren1-5/+21
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-17ARM: dts: Configure interconnect target module for dm814x tptc1Tony Lindgren1-5/+21
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-17ARM: dts: Configure interconnect target module for dm814x tptc0Tony Lindgren1-5/+21
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-17ARM: dts: Configure interconnect target module for dm814x tpccTony Lindgren1-14/+25
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also correct the custom node name to use generic node name dma. Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-17ARM: dts: Configure interconnect target module for dm814x cpswTony Lindgren2-50/+68
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module and drop the legacy "ti,hwmods" property. As this module is very similar to what we already have configured and working for am33xx, let's just update the whole cpsw with a single patch to avoid some extra churn on the dts files. Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-17Merge tag 'omap-for-v5.7/ti-sysc-drop-pdata-signed' into ti81xxTony Lindgren14-323/+884
Drop legacy platform data for omaps for v5.7 This series of changes continues dropping legacy platform data for omaps by updating devices to probe with ti-sysc interconnect target module driver: - Update omap4, omap5, am437x, and dra7 display subsystem (DSS) to probe with device tree data only - Update am335x, am437x and dra7 to probe EDMA to probe with device tree data only - Drop legacy platform data for am335x and am437x PRUSS as the current code just keeps the devices in reset - Drop legacy platform data for omap4 DSP and IPU as the current code just keeps the devices in reset - Configure am437x and dra7 PRU-ICSS to probe with device tree data For the dropped omap4 DSP and IPU platform data, there will be patches coming later on to configure the accelerators using the omap remoteproc bindings so hopefully folks can actually use these devices eventually.
2020-03-17clk: ti: Fix dm814x clkctrl for ethernetTony Lindgren1-0/+14
We are missing alwon ethernet clock for dm814x and this prevents us from probing the CPSW with device tree only data. Looks like Ethernet currently only works if it has been enabled in the bootloader. Looks like relying on the bootloader clocks is not an issue with the mainline kernel currently, but it will be an issue when configuring CPSW Ethernet to probe with device tree data only as we will be managing the clocks. Fixes: 26ca2e973844 ("clk: ti: dm814: add clkctrl clock data") Cc: linux-clk@vger.kernel.org Cc: Graeme Smecher <gsmecher@threespeedlogic.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-03-17ARM: dts: rockchip: remove #address-cells and #size-cells from i2s nodesJohan Jonker5-18/+0
An experimental test with the command below gives for example this error: arch/arm/boot/dts/rk3036-evb.dt.yaml: i2s@10220000: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+' '#address-cells' and '#size-cells' are not a valid property for i2s nodes, so remove them. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-i2s.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200311162524.19748-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17ARM: dts: rockchip: swap clocks and clock-names values for i2s nodesJohan Jonker3-10/+10
Current dts files with 'i2s' nodes are manually verified. In order to automate this process rockchip-i2s.txt has to be converted to yaml. In the new setup dtbs_check with rockchip-i2s.yaml expect clocks and clock-names values in the same order. Fix this for some older Rockchip models. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-i2s.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200311162524.19748-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17ARM: dts: rockchip: remove clock-names property from 'generic-ohci' nodesJohan Jonker2-4/+0
A test with the command below gives for example this error: arch/arm/boot/dts/rv1108-evb.dt.yaml: usb@30160000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+' 'clock-names' is not a valid property name for usb_host nodes with compatible string 'generic-ohci', so remove them. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ohci.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200312171441.21144-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17ARM: dts: rockchip: remove clock-names property from 'generic-ehci' nodesJohan Jonker3-6/+0
A test with the command below gives for example this error: arch/arm/boot/dts/rv1108-evb.dt.yaml: usb@30140000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+' 'clock-names' is not a valid property name for usb_host nodes with compatible string 'generic-ehci', so remove them. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ehci.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200312171441.21144-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17ARM: dts: rockchip: swap clocks and clock-names values for spdif nodesJohan Jonker2-4/+4
Current dts files with 'spdif' nodes are manually verified. In order to automate this process rockchip-spdif.txt has to be converted to yaml. In the new setup dtbs_check with rockchip-spdif.yaml expect clocks and clock-names values in the same order. Fix this for some older Rockchip models. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-spdif.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200312172240.21362-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17ARM: dts: rockchip: Keep rk3288-tinker SD card IO powered during rebootJoshua Watt1-0/+1
IO voltage regulator for the SD card must be kept on all the time, otherwise when the board reboots the SD card can't be read by the bootloader. Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Link: https://lore.kernel.org/r/20200219204224.34154-1-JPEWhacker@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17ARM: dts: rockchip: remove clock-frequency from saradc node rv1108Johan Jonker1-1/+0
An experimental test with the command below gives these errors: arch/arm/boot/dts/rv1108-elgin-r1.dt.yaml: adc@1038c000: 'clock-frequency' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/rv1108-evb.dt.yaml: adc@1038c000: 'clock-frequency' does not match any of the regexes: 'pinctrl-[0-9]+' 'clock-frequency' is not a valid property for a saradc node, so remove it. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/iio/adc/ rockchip-saradc.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200313132646.10317-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17ARM: dts: rockchip: fix vref-supply for &saradc node rk3288 firefly reloadJohan Jonker1-0/+1
A test with the command below gives this error: arch/arm/boot/dts/rk3288-firefly-reload.dt.yaml: saradc@ff100000: 'vref-supply' is a required property PMIC Channel OUT11 with powername 'vcc_18' (connected through R155 bridge with 'vccio_wl') is used for the recovery key and ADC_AVDD_1V8. Fix error by adding 'vcc_18' as vref for the saradc. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/iio/adc/ rockchip-saradc.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200314140755.4877-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17ARM: dts: rockchip: use DMA channels for UARTs for RK3288Katsuhiro Suzuki1-0/+8
This patch enables to use DMAC for all UARTs that are connected to dmac_peri core for Rochchip RK3288. Only uart2 is connected different DMAC (dmac_bus_s) so keep current settings on this patch. Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Link: https://lore.kernel.org/r/20200315095115.10106-1-katsuhiro@katsuster.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17ARM: dts: rockchip: rk3xxx: fix L2 cache-controller nodenameJohan Jonker1-1/+1
A test with the command below gives for example this error: arch/arm/boot/dts/rk3066a-bqcurie2.dt.yaml: l2-cache-controller@10138000: $nodename:0: 'l2-cache-controller@10138000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Fix error by changing nodename to 'cache-controller'. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/arm/l2c2x0.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200316165453.3022-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17ARM: dts: rockchip: fix lvds-encoder ports subnode for rk3188-bqedison2qcJohan Jonker1-11/+16
A test with the command below gives this error: arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: lvds-encoder: 'ports' is a required property Fix error by adding a ports wrapper for port@0 and port@1 inside the 'lvds-encoder' node for rk3188-bqedison2qc. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/ bridge/lvds-codec.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200316174647.5598-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-16ARM: dts: uniphier: Set SCSSI clock and reset IDs for each channelKunihiko Hayashi2-4/+4
Currently common clock and reset IDs were used, however, each clock and reset ID should be used for each channel. Pro5 and PXs2 are affected by this fix, but the SCSSI clock gate of Pro5 is common to all channels. Fixes: 92fa4f4cc2cd ("ARM: dts: uniphier: add SPI node for UniPhier 32bit SoCs") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-03-16ARM: dts: uniphier: Add USB3 controller nodes for Pro5Kunihiko Hayashi1-0/+148
Add USB3 controller nodes for Pro5 SoC and the boards. Pro5 SoC has 2 controllers. USB0 includes 1 SS-PHY and 1 HS-PHY, and USB1 includes 1 SS-PHY and 2 HS-PHY. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-03-16ARM: dts: imx6q-marsboard: properly define rgmii PHYOleksij Rempel1-1/+15
The Atheros AR8035 PHY can be autodetected but can't use interrupt support provided on this board. Define MDIO bus and the PHY node to make it work properly. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16ARM: dts: imx6dl-riotboard: properly define rgmii PHYOleksij Rempel1-1/+15
The Atheros AR8035 PHY can be autodetected but can't use interrupt support provided on this board. Define MDIO bus and the PHY node to make it work properly. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16ARM: dts: imx51-zii-rdu1: set name prefix for TPA6130A2Lucas Stach1-2/+3
Set a sound name prefix for the HPA, as otherwise the sound controls naming will clash with the controls of the DAC. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16ARM: dts: imx6: RDU2: assign video PLL as input to LDBLucas Stach1-0/+7
Currently we don't ensure that the LDB is clocked from the video PLL and relied on the bootloader to do the correct setup. This isn't always true, in which case we would run with a vastly different video clock than the desired one. Fix this by assigning the proper parent to the LDB. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16ARM: dts: vf: toradex: SPDX tags and copyright cleanupIgor Opaniuk7-265/+13
1. Replace boiler plate licenses texts with the SPDX license identifiers in Toradex Vybrid-based SoM device trees. 2. As X11 is identical to the MIT License, but with an extra sentence that prohibits using the copyright holders' names for advertising or promotional purposes without written permission, use MIT license instead of X11 ('s/X11/MIT/g'). 3. Replace "Toradex AG" with "Toradex" in the Copyright notice. 4. Use GPL2.0+ instead of GPL2.0, as it's used now by default for all new DTS files. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16ARM: dts: imx7: toradex: use SPDX-License-IdentifierIgor Opaniuk6-90/+12
1. Replace boiler plate licenses texts with the SPDX license identifiers in Toradex i.MX7-based SoM device trees. 2. As X11 is identical to the MIT License, but with an extra sentence that prohibits using the copyright holders' names for advertising or promotional purposes without written permission, use MIT license instead of X11 ('s/X11/MIT/g'). 3. Replace "Toradex AG" with "Toradex" in the Copyright notice. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16ARM: dts: imx6: toradex: use SPDX-License-IdentifierIgor Opaniuk6-228/+12
1. Replace boiler plate licenses texts with the SPDX license identifiers in Toradex iMX6-based SoM device trees. 2. As X11 is identical to the MIT License, but with an extra sentence that prohibits using the copyright holders' names for advertising or promotional purposes without written permission, use MIT license instead of X11 ('s/X11/MIT/g'). 3. Replace "Toradex AG" with "Toradex" in the Copyright notice. 4. Use GPL2.0+ instead of GPL2.0, as it's used now by default for all new DTS files from Toradex. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16ARM: dts: imx51: add capture-subsystem devicePhilipp Zabel1-0/+13
Add IPU CSI ports and capture-subsystem device so the capture subsystem part of the IPUv3EX can be used with the staging imx-media driver. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16ARM: dts: imx: add nvmem property for cpu0Peng Fan6-0/+30
Add nvmem related property for cpu0, then nvmem API could be used to read cpu speed grading to avoid directly read OCOTP registers mapped which could not handle defer probe. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16ARM: dts: imx6qdl: Add imx6qdl-pico supportFabio Estevam14-0/+928
Add support for all the imx6qdl-pico variants. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16ARM: dts: imx6ul-pico: Add support for the dwarf baseboardFabio Estevam2-0/+53
Add support for the imx6ul pico board with dwarf baseboard combination. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16ARM: dts: imx7d-pico: Add support for the nymph baseboardFabio Estevam2-0/+85
Add support for the imx7d pico board with nymph baseboard combination. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-23 01:20:51 +0300