summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2023-10-06ARM: dts: ti: omap: motorola-mapphone: Fix abe_clkctrl warning on bootTony Lindgren1-2/+2
[ Upstream commit ac08bda1569b06b7a62c7b4dd00d4c3b28ceaaec ] Commit 0840242e8875 ("ARM: dts: Configure clock parent for pwm vibra") attempted to fix the PWM settings but ended up causin an additional clock reparenting error: clk: failed to reparent abe-clkctrl:0060:24 to sys_clkin_ck: -22 Only timer9 is in the PER domain and can use the sys_clkin_ck clock source. For timer8, the there is no sys_clkin_ck available as it's in the ABE domain, instead it should use syc_clk_div_ck. However, for power management, we want to use the always on sys_32k_ck instead. Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Fixes: 0840242e8875 ("ARM: dts: Configure clock parent for pwm vibra") Depends-on: 61978617e905 ("ARM: dts: Add minimal support for Droid Bionic xt875") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06ARM: dts: ti: omap: Fix bandgap thermal cells addressing for omap3/4Tony Lindgren4-3/+7
[ Upstream commit 6469b2feade8fd82d224dd3734e146536f3e9f0e ] Fix "thermal_sys: cpu_thermal: Failed to read thermal-sensors cells: -2" error on boot for omap3/4. This is caused by wrong addressing in the dts for bandgap sensor for single sensor instances. Note that omap4-cpu-thermal.dtsi is shared across omap4/5 and dra7, so we can't just change the addressing in omap4-cpu-thermal.dtsi. Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Fixes: a761d517bbb1 ("ARM: dts: omap3: Add cpu_thermal zone") Fixes: 0bbf6c54d100 ("arm: dts: add omap4 CPU thermal data") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19ARM: dts: BCM5301X: Extend RAM to full 256MB for Linksys EA6500 V2Aleksey Nasibulin1-1/+2
commit 91994e59079dcb455783d3f9ea338eea6f671af3 upstream. Linksys ea6500-v2 have 256MB of ram. Currently we only use 128MB. Expand the definition to use all the available RAM. Fixes: 03e96644d7a8 ("ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2") Signed-off-by: Aleksey Nasibulin <alealexpro100@ya.ru> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Acked-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20230712014017.28123-1-ansuelsmth@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-19ARM: dts: qcom: msm8974pro-castor: correct touchscreen syna,nosleep-modeKrzysztof Kozlowski1-1/+1
commit 7c74379afdfee7b13f1cd8ff1ad6e0f986aec96c upstream. There is no syna,nosleep property in Synaptics RMI4 touchscreen: qcom-msm8974pro-sony-xperia-shinano-castor.dtb: synaptics@2c: rmi4-f01@1: 'syna,nosleep' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: ab80661883de ("ARM: dts: qcom: msm8974: Add Sony Xperia Z2 Tablet") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230720115335.137354-6-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-19ARM: dts: qcom: msm8974pro-castor: correct touchscreen function namesKrzysztof Kozlowski1-2/+2
commit 31fba16c19c45b2b3a7c23b0bfef80aed1b29050 upstream. The node names for functions of Synaptics RMI4 touchscreen must be as "rmi4-fXX", as required by bindings and Linux driver. qcom-msm8974pro-sony-xperia-shinano-castor.dtb: synaptics@2c: Unevaluated properties are not allowed ('rmi-f01@1', 'rmi-f11@11' were unexpected) Fixes: ab80661883de ("ARM: dts: qcom: msm8974: Add Sony Xperia Z2 Tablet") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230720115335.137354-5-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-19ARM: dts: qcom: msm8974pro-castor: correct inverted X of touchscreenKrzysztof Kozlowski1-1/+1
commit 43db69268149049540b1d2bbe8a69e59d5cb43b6 upstream. There is no syna,f11-flip-x property, so assume intention was to use touchscreen-inverted-x. Fixes: ab80661883de ("ARM: dts: qcom: msm8974: Add Sony Xperia Z2 Tablet") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230720115335.137354-4-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-19ARM: dts: samsung: exynos4210-i9100: Fix LCD screen's physical sizePaul Cercueil1-2/+2
commit b3f3fc32e5ff1e848555af8616318cc667457f90 upstream. The previous values were completely bogus, and resulted in the computed DPI ratio being much lower than reality, causing applications and UIs to misbehave. The new values were measured by myself with a ruler. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Fixes: 8620cc2f99b7 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2") Cc: <stable@vger.kernel.org> # v5.8+ Link: https://lore.kernel.org/r/20230714153720.336990-1-paul@crapouillou.net Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-13ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65Rohit Agarwal1-1/+1
[ Upstream commit f636d6c356b339b0d29eed025f8bf9efcb6eb274 ] Update the pmic used in sdx65 platform to pm7250b. Fixes: 26380f298b2b (ARM: dts: qcom: sdx65-mtp: Add pmk8350b and pm8150b pmic) Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/1691415534-31820-7-git-send-email-quic_rohiagar@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13ARM: dts: qcom: ipq4019: correct SDHCI XO clockRobert Marko1-3/+6
[ Upstream commit b5ed7a5c1fdb3981713f7b637b72aa390c3db036 ] Using GCC_DCD_XO_CLK as the XO clock for SDHCI controller is not correct, it seems that I somehow made a mistake of passing it instead of the fixed XO clock. Fixes: 04b3b72b5b8f ("ARM: dts: qcom: ipq4019: Add SDHCI controller node") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230811110150.229966-1-robert.marko@sartura.hr Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13ARM: dts: BCM53573: Fix Tenda AC9 switch CPU portRafał Miłecki1-2/+2
[ Upstream commit 7141209db9c335ab261a17933809a3e660ebdc12 ] Primary Ethernet interface is connected to the port 8 (not 5). Fixes: 64612828628c ("ARM: dts: BCM53573: Add Tenda AC9 switch ports") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20230723195416.7831-1-zajec5@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13ARM: dts: BCM53573: Fix Ethernet info for Luxul devicesRafał Miłecki2-0/+26
[ Upstream commit 44ad8207806973f4e4f7d870fff36cc01f494250 ] Both Luxul's XAP devices (XAP-810 and XAP-1440) are access points that use a non-default design. They don't include switch but have a single Ethernet port and BCM54210E PHY connected to the Ethernet controller's MDIO bus. Support for those devices regressed due to two changes: 1. Describing MDIO bus with switch After commit 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch") Linux stopped probing for MDIO devices. 2. Dropping hardcoded BCM54210E delays In commit fea7fda7f50a ("net: phy: broadcom: Fix RGMII delays configuration for BCM54210E") support for other PHY modes was added but that requires a proper "phy-mode" value in DT. Both above changes are correct (they don't need to be reverted or anything) but they need this fix for DT data to be correct and for Linux to work properly. Fixes: 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20230713111145.14864-1-zajec5@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)Krzysztof Kozlowski1-1/+1
[ Upstream commit 982655cb0e7f18934d7532c32366e574ad61dbd7 ] The davicom,dm9000 Ethernet Controller accepts two reg addresses. Fixes: b672b27d232e ("ARM: dts: Add Device tree for s5pc110/s5pv210 boards") Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20230713152926.82884-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)Krzysztof Kozlowski1-1/+1
[ Upstream commit cf0cb2af6a18f28b84f9f1416bff50ca60d6e98a ] The davicom,dm9000 Ethernet Controller accepts two reg addresses. Fixes: a43736deb47d ("ARM: dts: Add dts file for S3C6410-based Mini6410 board") Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20230713152926.82884-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13ARM: dts: BCM53573: Use updated "spi-gpio" binding propertiesRafał Miłecki1-3/+3
[ Upstream commit 2c0fd6b3d0778ceab40205315ccef74568490f17 ] Switch away from deprecated properties. This fixes: arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-sck: False schema does not allow [[3, 21, 0]] From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-miso: False schema does not allow [[3, 22, 0]] From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-mosi: False schema does not allow [[3, 23, 0]] From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: 'sck-gpios' is a required property From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: Unevaluated properties are not allowed ('gpio-miso', 'gpio-mosi', 'gpio-sck' were unexpected) From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20230707114004.2740-4-zajec5@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13ARM: dts: BCM53573: Add cells sizes to PCIe nodeRafał Miłecki1-0/+3
[ Upstream commit 3392ef368d9b04622fe758b1079b512664b6110a ] This fixes: arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: pcie@2000: '#address-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: pcie@2000: '#size-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml Two properties that need to be added later are "device_type" and "ranges". Adding "device_type" on its own causes a new warning and the value of "ranges" needs to be determined yet. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20230707114004.2740-3-zajec5@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13ARM: dts: BCM53573: Drop nonexistent #usb-cellsRafał Miłecki1-2/+0
[ Upstream commit 05d2c3d552b8c92fc397377d9d1112fc58e2cd59 ] Such property simply doesn't exist (is not documented or used anywhere). This fixes: arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: usb@d000: Unevaluated properties are not allowed ('#usb-cells' was unexpected) From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20230707114004.2740-2-zajec5@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13ARM: dts: BCM53573: Drop nonexistent "default-off" LED triggerRafał Miłecki2-3/+0
[ Upstream commit be7e1e5b0f67c58ec4be0a54db23b6a4fa6e2116 ] There is no such trigger documented or implemented in Linux. It was a copy & paste mistake. This fixes: arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: leds: led-wlan:linux,default-trigger: 'oneOf' conditional failed, one must be fixed: 'default-off' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'none', 'torch', 'usb-gadget', 'usb-host', 'usbport'] 'default-off' does not match '^cpu[0-9]*$' 'default-off' does not match '^hci[0-9]+-power$' 'default-off' does not match '^mmc[0-9]+$' 'default-off' does not match '^phy[0-9]+tx$' From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20230707114004.2740-1-zajec5@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13ARM: dts: stm32: Add missing detach mailbox for DHCOR SoMMarek Vasut1-2/+2
[ Upstream commit 2f38de940f072db369edd3e6e8d82bb8f42c5c9b ] Add missing "detach" mailbox to this board to permit the CPU to inform the remote processor on a detach. This signal allows the remote processor firmware to stop IPC communication and to reinitialize the resources for a re-attach. Without this mailbox, detach is not possible and kernel log contains the following warning to, so make sure all the STM32MP15xx platform DTs are in sync regarding the mailboxes to fix the detach issue and the warning: " stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach" " Fixes: 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13ARM: dts: stm32: Add missing detach mailbox for DHCOM SoMMarek Vasut1-2/+2
[ Upstream commit deb7edbc27a6ec4d8f5edfd8519b7ed13cbd2a52 ] Add missing "detach" mailbox to this board to permit the CPU to inform the remote processor on a detach. This signal allows the remote processor firmware to stop IPC communication and to reinitialize the resources for a re-attach. Without this mailbox, detach is not possible and kernel log contains the following warning to, so make sure all the STM32MP15xx platform DTs are in sync regarding the mailboxes to fix the detach issue and the warning: " stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach" " Fixes: 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13ARM: dts: stm32: Add missing detach mailbox for Odyssey SoMMarek Vasut1-2/+2
[ Upstream commit 966f04a89d77548e673de2c400abe0b2cf5c15db ] Add missing "detach" mailbox to this board to permit the CPU to inform the remote processor on a detach. This signal allows the remote processor firmware to stop IPC communication and to reinitialize the resources for a re-attach. Without this mailbox, detach is not possible and kernel log contains the following warning to, so make sure all the STM32MP15xx platform DTs are in sync regarding the mailboxes to fix the detach issue and the warning: " stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach" " Fixes: 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-ArgonMarek Vasut1-2/+2
[ Upstream commit 0ee0ef38aa9f75f21b51f729dd42b2e932515188 ] Add missing "detach" mailbox to this board to permit the CPU to inform the remote processor on a detach. This signal allows the remote processor firmware to stop IPC communication and to reinitialize the resources for a re-attach. Without this mailbox, detach is not possible and kernel log contains the following warning to, so make sure all the STM32MP15xx platform DTs are in sync regarding the mailboxes to fix the detach issue and the warning: " stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach" " Fixes: 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-17Merge tag 'omap-for-v6.5/fixes-signed' of ↵Arnd Bergmann1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps A fix external abort on non-linefetch for am335x that is fixed with a flush of posted write. And two networking fixes for beaglebone mostly for revision c3 to do phy reset with a gpio and to fix a boot time warning. * tag 'omap-for-v6.5/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-bone-common: Add vcc-supply for on-board eeprom ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board bus: ti-sysc: Flush posted write on enable before reset Link: https://lore.kernel.org/r/pull-1692158536-457318@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-14ARM: dts: am335x-bone-common: Add vcc-supply for on-board eepromShengyu Qu1-0/+1
The on-board eeprom on beaglebone series has a power supply from VDD_3V3A, add that to dts to reduce dummy regulator warning. Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Message-ID: <TY3P286MB2611CDC84604B11570B4A8D2980FA@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-08-14ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 boardShengyu Qu1-0/+8
This patch adds ethernet PHY reset GPIO config for Beaglebone Black series boards with revision C3. This fixes a random phy startup failure bug discussed at [1]. The GPIO pin used for reset is not used on older revisions, so it is ok to apply to all board revisions. The reset timing was discussed and tested at [2]. [1] https://forum.digikey.com/t/ethernet-device-is-not-detecting-on-ubuntu-20-04-lts-on-bbg/19948 [2] https://forum.beagleboard.org/t/recognizing-a-beaglebone-black-rev-c3-board/31249/ Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Message-ID: <TY3P286MB26113797A3B2EC7E0348BBB2980FA@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-08-12ARM: dts: integrator: fix PCI bus dtc warningsLin Yujun1-1/+1
An warning is reported when allmodconfig is used to compile the kernel of the ARM architecture: arch/arm/boot/dts/arm/integratorap.dts:161.22-206.4: Warning (pci_bridge): /pciv3@62000000: node name is not "pci" or "pcie" Change the node name to pci to clear the build warning. Signed-off-by: Lin Yujun <linyujun809@huawei.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230811-versatile-dts-v6-6-v1-1-d8cb9d1947ed@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12Merge tag 'imx-fixes-6.5-2' of ↵Arnd Bergmann3-7/+15
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.5, 2nd round: - Fix i.MX93 ANATOP 'reg' resource size to avoid overlapping with TMU memory area. - Fix RTC interrupt level on imx6qdl-phytec-mira board. - Remove LDB endpoint from from the common imx6sx.dtsi as it causes regression for boards that has the LCDIF connected directly to a parallel display. - Drop CSI1 PHY reference clock configuration from i.MX8MM/N device tree to avoid overclocking. - Set a proper default tuning step for i.MX6SX and i.MX7D uSDHC to fix a tuning failure seen with some SD cards. * tag 'imx-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx93: Fix anatop node size ARM: dts: imx: Set default tuning step for imx6sx usdhc arm64: dts: imx8mm: Drop CSI1 PHY reference clock configuration arm64: dts: imx8mn: Drop CSI1 PHY reference clock configuration ARM: dts: imx: Set default tuning step for imx7d usdhc ARM: dts: imx6: phytec: fix RTC interrupt level ARM: dts: imx6sx: Remove LDB endpoint Link: https://lore.kernel.org/r/20230809100034.GS151430@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-07-30ARM: dts: imx: Set default tuning step for imx6sx usdhcXiaolei Wang1-0/+6
If the tuning step is not set, the tuning step is set to 1. For some sd cards, the following Tuning timeout will occur. Tuning failed, falling back to fixed sampling clock So set the default tuning step. This refers to the NXP vendor's commit below: https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/ arch/arm/boot/dts/imx6sx.dtsi#L1108-L1109 Fixes: 1e336aa0c025 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx: Set default tuning step for imx7d usdhcXiaolei Wang1-0/+6
If the tuning step is not set, the tuning step is set to 1. For some sd cards, the following Tuning timeout will occur. Tuning failed, falling back to fixed sampling clock mmc0: Tuning failed, falling back to fixed sampling clock So set the default tuning step. This refers to the NXP vendor's commit below: https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/ arch/arm/boot/dts/imx7s.dtsi#L1216-L1217 Fixes: 1e336aa0c025 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx6: phytec: fix RTC interrupt levelAndrej Picej1-1/+1
RTC interrupt level should be set to "LOW". This was revealed by the introduction of commit: f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode") which changed the way IRQ type is obtained. Signed-off-by: Andrej Picej <andrej.picej@norik.com> Reviewed-by: Stefan Riedmüller <s.riedmueller@phytec.de> Fixes: 800d595151bb ("ARM: dts: imx6: Add initial support for phyBOARD-Mira") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx6sx: Remove LDB endpointFabio Estevam1-6/+2
Remove the LDB endpoint description from the common imx6sx.dtsi as it causes regression for boards that has the LCDIF connected directly to a parallel display. Let the LDB endpoint be described in the board devicetree file instead. Cc: stable@vger.kernel.org Fixes: b74edf626c4f ("ARM: dts: imx6sx: Add LDB support") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-27Merge tag 'imx-fixes-6.5' of ↵Arnd Bergmann2-1/+11
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.5: - A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU frequency of sk-imx53 board - Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux - A couple of imx8mm-venice fixes from Tim Harvey to diable disp_blk_ctrl - A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct VPU label and gpio-line-names - Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as bus_power_dev child, so that runtime PM can translate into the necessary GPC power domain action * tag 'imx-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child ARM: dts: nxp/imx: limit sk-imx53 supported frequencies arm64: dts: freescale: Fix VPU G2 clock arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux arm64: dts: phycore-imx8mm: Correction in gpio-line-names arm64: dts: phycore-imx8mm: Label typo-fix of VPU ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl Link: https://lore.kernel.org/r/20230725075837.GR151430@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-07-21ARM: dts: at91: sam9x60: fix the SOC detectionDurai Manickam KR1-13/+13
Remove the dbgu compatible strings in the UART submodule of the flexcom for the proper SOC detection. Fixes: 99c808335877 (ARM: dts: at91: sam9x60: Add missing flexcom definitions) Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com> Link: https://lore.kernel.org/r/20230712100042.317856-1-durai.manickamkr@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-07-21ARM: dts: nspire: Fix arm primecell compatible stringSudeep Holla1-1/+1
Commit c44e0503e5fd ("docs: dt: fix documented Primecell compatible string") removed the last occurrence of incorrect "arm,amba-primecell" compatible string, but somehow one occurrence of the same is left in the nspire platform. Fix the same by replacing it with the correct "arm,primecell" compatible. Cc: Rob Herring <robh+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Conor Dooley <conor+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20230711092617.1412815-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-07-19ARM: dts: nxp/imx: limit sk-imx53 supported frequenciesDmitry Baryshkov1-0/+10
The SK-IMX53 board, bearing i.MX536A CPU, is not stable when running at 1.2 GHz (default iMX53 maximum). The SoC is only rated up to 800 MHz. Disable 1.2 GHz and 1 GHz frequencies. Fixes: 0b8576d8440a ("ARM: dts: imx: Add support for SK-iMX53 board") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-18ARM: dts: nxp/imx6sll: fix wrong property name in usbphy nodeXu Yang1-1/+1
Property name "phy-3p0-supply" is used instead of "phy-reg_3p0-supply". Fixes: 9f30b6b1a957 ("ARM: dts: imx: Add basic dtsi file for imx6sll") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-05ARM: dts: st: add missing space before {Krzysztof Kozlowski11-22/+22
Add missing whitespace between node name/label and opening {. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230705150033.293832-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-30Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2646-4371/+8797
Pull ARM SoC devicetree updates from Arnd Bergmann: "The biggest change this time is for the 32-bit devicetree files, which are all moved to a new location, using separate subdirectories for each SoC vendor, following the same scheme that is used on arm64, mips and riscv. This has been discussed for many years, but so far we never did this as there was a plan to move the files out of the kernel entirely, which has never happened. The impact of this will be that all external patches no longer apply, and anything depending on the location of the dtb files in the build directory will have to change. The installed files after 'make dtbs_install' keep the current location. There are six added SoCs here that are largely variants of previously added chips. Two other chips are added in a separate branch along with their device drivers. - The Samsung Exynos 4212 makes its return after the Samsung Galaxy Express phone is addded at last. The SoC support was originally added in 2012 but removed again in 2017 as it was unused at the time. - Amlogic C3 is a Cortex-A35 based smart IP camera chip - Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of the still common MSM8916 (Snapdragon 410) phone chip that has been supported for a long time. - Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end laptop chips, used in the Lenovo Flex 5G, which is added along with the reference board. - Qualcomm SDX75 is the latest generation modem chip that is used as a peripherial in phones but can also run a standalone Linux. Unlike the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55. - Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie C910 core, a step up from all previously added rv64 chips. All of the above come with reference board implementations, those included there are 39 new board files, but only five more 32-bit this time, probably a new low: - Marantec Maveo board based on dhcor imx6ull module - Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip - Epson Moverio BT-200 AR glasses based on TI OMAP4 - PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM - ICnova ADB4006 board based on Allwinner A20 On the 64-bit side, there are also fewer addded machines than we had in the recent releases: - Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device. - NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234 - Qualcomm gains support for 6 reference boards on various members of their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top of the various reference platforms for their new chips. - Rockchips support for several newer boards: Indiedroid Nova (rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S (rk3568) - TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin family with AM62 COM, carrier and dev boards Other changes to existing boards contain the usual minor improvements along with - continued updates to clean up dts files based on dtc warnings and binding checks, in particular cache properties and node names - support for devicetree overlays on at91, bcm283x - significant additions to existing SoC support on mediatek, qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1 As usual, a lot more detail is available in the individual merge commits" * tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits) ARM: mvebu: fix unit address on armada-390-db flash ARM: dts: Move .dts files to vendor sub-directories kbuild: Support flat DTBs install ARM: dts: Add .dts files missing from the build ARM: dts: allwinner: Use quoted #include ARM: dts: lan966x: kontron-d10: add PHY interrupts ARM: dts: lan966x: kontron-d10: fix SPI CS ARM: dts: lan966x: kontron-d10: fix board reset ARM: dts: at91: Enable device-tree overlay support for AT91 boards arm: dts: Enable device-tree overlay support for AT91 boards arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller ARM: dts: at91: use generic name for shutdown controller ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML riscv: dts: sort makefile entries by directory riscv: defconfig: enable T-HEAD SoC MAINTAINERS: add entry for T-HEAD RISC-V SoC riscv: dts: thead: add sipeed Lichee Pi 4A board device tree riscv: dts: add initial T-HEAD TH1520 SoC device tree riscv: Add the T-HEAD SoC family Kconfig option ...
2023-06-22ARM: mvebu: fix unit address on armada-390-db flashArnd Bergmann1-1/+1
The unit address needs to be changed to match the reg property: arch/arm/boot/dts/marvell/armada-390-db.dts:84.10-106.4: Warning (spi_bus_reg): /soc/spi@10680/flash@1: SPI bus unit address format error, expected "0" Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-21Merge tag 'arm-dts-mv-for-6.5' of ↵Arnd Bergmann2644-1754/+2052
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into soc/dt ARM: dts: Move .dts files to vendor sub-directories The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. * tag 'arm-dts-mv-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: ARM: dts: Move .dts files to vendor sub-directories kbuild: Support flat DTBs install ARM: dts: Add .dts files missing from the build ARM: dts: allwinner: Use quoted #include Link: https://lore.kernel.org/r/20230621185025.GA3197738-robh@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring2644-1761/+2051
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-21ARM: dts: Add .dts files missing from the buildRob Herring1-0/+8
Comparing .dts files to built .dtb files yielded a few .dts files which are never built. Add them to the build. Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-21ARM: dts: allwinner: Use quoted #includeRob Herring1-1/+1
In preparation to move .dts files into subdirectories, include sunxi-h3-h5-emlid-neutis.dtsi from the current directory rather than the symlinked include path. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-21Merge tag 'at91-dt-6.5-2' of ↵Arnd Bergmann22-21/+50
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt AT91 DT for 6.5 #2 It contains: - generic names for shutdown controller nodes - enablement of DT overlay support for some AT91 boards - fix reset and SPI CS for lan966x-kontron-kswitch-d10-mmt based boards - addition of PHY interrupts for lan966x-kontron-kswitch-d10-mmt-8g board * tag 'at91-dt-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: lan966x: kontron-d10: add PHY interrupts ARM: dts: lan966x: kontron-d10: fix SPI CS ARM: dts: lan966x: kontron-d10: fix board reset ARM: dts: at91: Enable device-tree overlay support for AT91 boards ARM: dts: at91: use generic name for shutdown controller Link: https://lore.kernel.org/r/20230621093853.1575312-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-21ARM: dts: lan966x: kontron-d10: add PHY interruptsMichael Walle2-0/+15
With interrupt handling fixed in the MaxLinear PHY driver, see commit 97a89ed101bb ("net: phy: mxl-gpy: disable interrupts on GPY215 by default"), we can finally add the correct interrupt description to the device tree. Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230616-feature-d10-dt-cleanups-v1-3-50dd0452b8fe@kernel.org
2023-06-21ARM: dts: lan966x: kontron-d10: fix SPI CSMichael Walle1-1/+7
The pinctrl node was missing which change the pin mux to GPIO mode. Add it so we don't have to rely on the bootloader to set the correct mode. Fixes: 79d83b3a458e ("ARM: dts: lan966x: add basic Kontron KSwitch D10 support") Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230616-feature-d10-dt-cleanups-v1-2-50dd0452b8fe@kernel.org
2023-06-21ARM: dts: lan966x: kontron-d10: fix board resetMichael Walle1-0/+8
The pinctrl node was missing which change the pin mux to GPIO mode. Add it. Fixes: 79d83b3a458e ("ARM: dts: lan966x: add basic Kontron KSwitch D10 support") Signed-off-by: Michael Walle <mwalle@kernel.org> [claudiu.beznea: moved pinctrl-* bindings after compatible] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230616-feature-d10-dt-cleanups-v1-1-50dd0452b8fe@kernel.org
2023-06-21ARM: dts: at91: Enable device-tree overlay support for AT91 boardsCristian Birsan1-0/+14
Add the '-@' DTC option for AT91 boards that have device-tree overlays. This option populates the '__symbols__' node that contains all the necessary symbols for supporting device-tree overlays (from bootloader) on these devices. This change increases the size of the resulting DTB with ~30%-40%. Below are the measurements performed v6.4-rc6: at91-sam9x60_curiosity.dtb 28499 -> 36641 bytes at91-sam9x60ek.dtb 30867 -> 39609 bytes at91-sama5d27_som1_ek.dtb 26086 -> 34166 bytes at91-sama5d27_wlsom1_ek.dtb 26045 -> 33184 bytes at91-sama5d2_icp.dtb 27521 -> 36155 bytes at91-sama5d2_ptc_ek.dtb 23237 -> 29612 bytes at91-sama5d2_xplained.dtb 27262 -> 35326 bytes at91-sama5d3_eds.dtb 27924 -> 39939 bytes at91-sama5d3_xplained.dtb 28400 -> 40650 bytes at91-sama5d4_xplained.dtb 26456 -> 36107 bytes at91-sama7g5ek.dtb 29212 -> 37289 bytes Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> [claudiu.beznea: s/arm: dts/ARM: dts: at91/ in commit title] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230616152932.1484154-1-cristian.birsan@microchip.com
2023-06-21Merge tag 'arm-soc/for-6.5/devicetree' of ↵Arnd Bergmann39-687/+734
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 6.5, please pull the following: - Krzysztof adds missing cache properties for the BCM63xx DSL routers - Rafal relicenses a number of the BCM5301X DTS files to the GPL 2.0+ / MIT license, and he fixes a number of Device Tree nodes warnings, adds MAC address for all Luxul routers and adds Netgear R8000 Wi-Fi regulatory information to the DTS - Stanislav updates the "BCM mobile" SoCs DTS files to fix various warnings - Aurelien enables the BCM283x DTS files to be built with relocation information to make them usable with DT overlays - Christian fixes the Meraki DTS to have correct NAND ECC properties, correct partition numbers and fixed-link node(s) properties * tag 'arm-soc/for-6.5/devicetree' of https://github.com/Broadcom/stblinux: (33 commits) ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappings dt-bindings: net: wireless: brcm,bcm4329-fmac: allow generic properties dt-bindings: net: wireless: brcm,bcm4329-fmac: add BCM4366 binding ARM: dts: BCM5301X: fix duplex-full => full-duplex ARM: dts: BCM5301X: MR32: remove partition index numbers ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo property dt-bindings: power: reset: bcm21664-resetmgr: convert to YAML ARM: dts: bcm21664-garnet: use node labels ARM: dts: bcm11351/21664: add UART, I2C node labels ARM: dts: bcm-mobile: move status properties to the end of nodes ARM: dts: bcm21664/23550: use CCU compatibles directly ARM: dts: bcm-mobile: change "" includes to <> where applicable ARM: dts: BCM5301X: Describe switch ports in the main DTS ARM: dts: BCM5301X: Relicense Christian's code to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32 keys ARM: dts: BCM5301X: Drop invalid #usb-cells dt-bindings: arm: bcm: Add bindings for Buffalo WZR-1166DHP(2) ARM: dts: BCM5301X: Use updated "spi-gpio" binding properties ... Link: https://lore.kernel.org/r/20230619134920.3384844-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-21arm: dts: Enable device-tree overlay support for AT91 boardsCristian Birsan1-0/+14
Add the '-@' DTC option for AT91 boards that have device-tree overlays. This option populates the '__symbols__' node that contains all the necessary symbols for supporting device-tree overlays (from bootloader) on these devices. This change increases the size of the resulting DTB with ~30%-40%. Below are the measurements performed v6.4-rc6: at91-sam9x60_curiosity.dtb 28499 -> 36641 bytes at91-sam9x60ek.dtb 30867 -> 39609 bytes at91-sama5d27_som1_ek.dtb 26086 -> 34166 bytes at91-sama5d27_wlsom1_ek.dtb 26045 -> 33184 bytes at91-sama5d2_icp.dtb 27521 -> 36155 bytes at91-sama5d2_ptc_ek.dtb 23237 -> 29612 bytes at91-sama5d2_xplained.dtb 27262 -> 35326 bytes at91-sama5d3_eds.dtb 27924 -> 39939 bytes at91-sama5d3_xplained.dtb 28400 -> 40650 bytes at91-sama5d4_xplained.dtb 26456 -> 36107 bytes at91-sama7g5ek.dtb 29212 -> 37289 bytes Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Link: https://lore.kernel.org/r/20230616152932.1484154-1-cristian.birsan@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-21Merge tag 'mvebu-dt-6.5-1' of ↵Arnd Bergmann5-10/+221
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt for 6.5 (part 1) Add Endian 4i Edge 200 board (kirkwood based) Add missing phy-modes on Armada 388 clearfog board Replace deprecated spi-gpio properties on Armada XP Align MTD partition nodes to dtschema for all mvebu boards * tag 'mvebu-dt-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: mvebu: align MTD partition nodes to dtschema ARM: dts: armada-xp: Replace deprecated spi-gpio properties ARM: dts: armada388-clearfog: add missing phy-modes ARM: dts: kirkwood: Add Endian 4i Edge 200 board Link: https://lore.kernel.org/r/87a5wzh8b1.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 17:07:18 +0300