summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2018-05-25Merge tag 'mvebu-dt-4.18-1' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson30-787/+948
mvebu dt for 4.18 (part 1) - Update 32-bit Marvell EBU NAND DT nodes with new bindings - Add NAND pinctrl information for the Armada 98DX3236 and variants * tag 'mvebu-dt-4.18-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-xp-98dx: Add NAND pinctrl information ARM: dts: armada-39x: update NAND node with new bindings ARM: dts: armada-38x: update NAND node with new bindings ARM: dts: armada-375: update NAND node with new bindings ARM: dts: armada-370-xp: update NAND node with new bindings Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-25Merge tag 'tegra-for-4.18-arm-dt' of ↵Olof Johansson4-6/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt ARM: tegra: Device tree changes for v4.18-rc1 Contains a fix for the high-speed UART on Toradex Apalis TK1 boards as well as IOMMU enablement for various devices on Tegra30 and Tegra30. * tag 'tegra-for-4.18-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: dts: tegra114: Add IOMMU nodes to Host1x and its clients ARM: dts: tegra30: Add IOMMU nodes to Host1x and its clients ARM: tegra: apalis-tk1: Fix high speed UART compatible Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-25Merge tag 'davinci-for-v4.18/dt' of ↵Olof Johansson3-216/+319
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt DaVinci device-tree updates for v4.18 * DA850 EVM gains USB support, SD card write-protect, card detect and some clean-up * Support for gpio-ranges makes using gpios from DT much easier * Lego EV3 clean-up * tag 'davinci-for-v4.18/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850-evm: add WP and CD to MMC ARM: dts: da850-lego-ev3: remove unnecessary gpio-keys properties ARM: dts: da850-evm: use phandles to extend nodes ARM: dts: da850: use gpio-ranges ARM: dts: da850-evm: Enable usb_phy, usb0 and usb1 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-25Merge tag 'amlogic-dt' of ↵Olof Johansson6-40/+386
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Amlogic 32-bit DT updates for v4.18 - add support for meson8m2 SoC - new board: Tronsmart MXIII Plus using meson8m2 SoC - odroid-c1: add IR * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus ARM: dts: meson8: add the uart_A pins ARM: dts: meson: add support for the Meson8m2 SoC ARM: meson: add support for the Meson8m2 SoCs ARM: dts: meson8b: odroid-c1: enable the IR receiver ARM: dts: meson8b: odroid-c1: sort nodes alphabetically ARM: dts: meson8b: add the cortex-a5-pmu compatible PMU ARM: dts: meson8: add the cortex-a9-pmu compatible PMU Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-18ARM: dts: armada-xp-98dx: Add NAND pinctrl informationChris Packham1-0/+13
Add pin control information for the NAND interface on the Armada 98DX3236 and variants. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-05-18ARM: dts: armada-39x: update NAND node with new bindingsMiquel Raynal4-94/+112
Use the new bindings of the Marvell NAND controller driver. Also adapt the NAND controller node organization to distinguish which property is relevant for the controller, and which one is NAND chip specific. Expose the partitions as a subnode of the NAND chip. Remove the 'marvell,nand-enable-arbiter' property, not needed anymore as the new driver activates the arbiter by default for all boards which is either needed or harmless. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-05-18ARM: dts: armada-38x: update NAND node with new bindingsMiquel Raynal8-318/+356
Use the new bindings of the Marvell NAND controller driver. Also adapt the NAND controller node organization to distinguish which property is relevant for the controller, and which one is NAND chip specific. Expose the partitions as a subnode of the NAND chip. Remove the 'marvell,nand-enable-arbiter' property, not needed anymore as the new driver activates the arbiter by default for all boards which is either needed or harmless. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-05-18ARM: dts: armada-375: update NAND node with new bindingsMiquel Raynal2-23/+33
Use the new bindings of the Marvell NAND controller driver. Also adapt the NAND controller node organization to distinguish which property is relevant for the controller, and which one is NAND chip specific. Expose the partitions as a subnode of the NAND chip. Remove the 'marvell,nand-enable-arbiter' property, not needed anymore as the new driver activates the arbiter by default for all boards which is either needed or harmless. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-05-18ARM: dts: armada-370-xp: update NAND node with new bindingsMiquel Raynal15-352/+434
Use the new bindings of the Marvell NAND controller driver. Also adapt the NAND controller node organization to distinguish which property is relevant for the controller, and which one is NAND chip specific. Expose the partitions as a subnode of the NAND chip. Remove the 'marvell,nand-enable-arbiter' property, not needed anymore as the new driver activates the arbiter by default for all boards which is either needed or harmless. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-05-16ARM: dts: da850-evm: add WP and CD to MMCAdam Ford1-0/+2
The legacy mode uses the write protect and card detect but DT does not. This patch enables Write-Protect and Card-Detect pins for the MMC card, and the gpio-ranges property sets the gpio pinmuxing for those respective pins. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-15Merge tag 'v4.18-rockchip-dts32-1' of ↵Olof Johansson7-5/+35
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Fixed pin numbers for uart4 on rk3288, iommu clocks and small changes over multiple boards like default serial setting for rk3288-tinker, output selection for the dp83867 on the phycore-som and the newly added pwm-backlight delay properties for veyron boards. * tag 'v4.18-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: default serial for rk3288 Tinker Board ARM: dts: rockchip: set PWM delay backlight settings for Minnie ARM: dts: rockchip: set PWM delay backlight settings for Veyron ARM: dts: rockchip: add clocks in iommu nodes ARM: dts: rockchip: Add dp83867 CLK_OUT muxing on rk3288-phycore-som ARM: dts: rockchip: fix uart4 pin-numbers for rk3288 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-15Merge tag 'vexpress-updates-4.18' of ↵Olof Johansson6-714/+730
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt ARMv7 Vexpress updates/cleanups for v4.18 1. Syntactic restructuring of motherboard include file so that it can be included at the top of any other DTS file as it should be rather than existing include in the middle of the file at a specific location 2. Use of standard GPIO controller bindings for few sysreg components like LED, MMC Write Protect/Card Detect and Flash Write Protect to fix some of the new DTC warnings 3. Cleanup to replace all underscores('_') with hyphens('-') in the device node names * tag 'vexpress-updates-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: ARM: dts: vexpress: replace '_' with '-' in node names ARM: dts: vexpress: use standard gpio bindings for sys_{led,mci,flash} ARM: dts: vexpress: Restructure motherboard includes Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-15Merge tag 'sti-dt-for-v4.18-round1' of ↵Olof Johansson5-43/+43
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt STi DT update: _ Fix complain about IRQ_TYPE_NONE_usage * tag 'sti-dt-for-v4.18-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: stihxxx-b2120: Fix complain about IRQ_TYPE_NONE usage ARM: dts: stih410: Fix complain about IRQ_TYPE_NONE usage ARM: dts: stih407: Fix complain about IRQ_TYPE_NONE usage ARM: dts: stih407-pinctrl: Fix complain about IRQ_TYPE_NONE usage ARM: dts: stih407-family: Fix complain about IRQ_TYPE_NONE usage Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-15Merge tag 'v4.17-next-dts32' of ↵Olof Johansson22-613/+1573
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt convert to SPDX IDs mt7623: - add audio, bluetooth, highspees DMA and SPI-NOR nodes - fix invalid memory nodes by not using skeleton64.dtsi - fix memory size for bananapi-r2 - fix dtc warnings - refactor dts and dtsi to aviod code duplication - add mt7623n and mt7623a reference boards * tag 'v4.17-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mt7623: add MT7623N reference board with eMMC arm: dts: mt7623: add MT7623A reference boards arm: dts: mt7623: add MT7623A SoC level DTS arm: dts: mt7623: extend common file reused by all boards with MT7623 SoCs arm: dts: mt6323: move node mt6323 leds to mt6323.dtsi arm: dts: mt7623: add BTIF, HSDMA and SPI-NOR device nodes arm: dts: mt7623: fix all Warnings (unit_address_vs_reg) arm: dts: mt7623: fix available memory size on bananapi-r2 arm: dts: mt7623: fix invalid memory node being generated arm: dts: mediatek: converted to using SPDX identifiers arm: dts: mediatek: modify audio related nodes for both MT2701 and MT7623 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14Merge tag 'samsung-dt-4.18' of ↵Olof Johansson30-693/+183
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Samsung DTS ARM changes for v4.18 1. Add support for USB OTG port on Origen board. 2. Allow earlycon on Rinato board. 3. Cleanup from obsolete properties. 4. Fix DTC warnings. 5. Remove Exynos5440 entirely. 6. Add mem-2-mem Scaler devices. * tag 'samsung-dt-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Update x and y properties for mms114 touchscreen ARM: dts: exynos: Add mem-2-mem Scaler devices ARM: dts: s3c64xx: Remove skeleton.dtsi and fix DTC warnings for /memory ARM: dts: s3c24xx: Fix unnecessary address/size cells DTC warnings ARM: dts: s3c24xx: Remove skeleton.dtsi and fix DTC warning for /memory ARM: dts: exynos/s3c: Remove leading 0x and 0s from bindings notation ARM: dts: exynos: Remove Exynos5440 ARM: dts: exynos: Remove unnecessary address/size properties in dp-controller of Exynos5 ARM: dts: exynos: Bring order in fixed-regulators naming in Midas boards ARM: dts: exynos: Remove regulators node container in Origen and N710x ARM: dts: exynos: Remove unnecessary address/size properties in Origen ARM: dts: exynos: Remove unnecessary address/size properties in Midas boards ARM: dts: exynos: Fix invalid node referenced by i2c20 alias in Peach Pit and Pi ARM: dts: exynos: Move syscon poweroff and restart nodes under the PMU ARM: dts: exynos: Remove obsolete clock properties from power domains ARM: dts: exynos: Add serial path for Rinato board to get earlycon support ARM: dts: exynos: Add support for USB OTG port on Origen board Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14Merge tag 'gemini-dts-arm-soc' of ↵Olof Johansson8-58/+56
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt DTS updates for the Gemini: - Set righ flashes on DNS-313 - Activate ATA1 on NAS4220B - Set right harddisk triggers on the D-Link devices - Fix all DTC warnings * tag 'gemini-dts-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: Fix DTC warnings ARM: dts: Add second ATA to NAS4220B ARM: dts: Fix bootargs for Gemini D-Link devices ARM: dts: Fix the DNS-313 flash compatible ARM: dts: Set DNS-685 LEDs to use better triggers ARM: dtd: Set DNS-313 LEDs to use better triggers ARM: dts: gemini: Fix "debounce-interval" property misspelling Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14Merge tag 'arm-soc/for-4.18/devicetree' of ↵Olof Johansson43-161/+381
https://github.com/Broadcom/stblinux into next/dt This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.18, please pull the following: - Stefan provides updates to the BCM2835 RNG Device Tree binding and Device Tree node by adding its missing interrupt line. - Rafal switches the Luxul XWC-1000 and the D-Link DIR-885L to the new partitions syntax which allows specifying a partition parser - Rafal also updates a bunch of BCM5301X Device Tree source files to a more standard SPDX tag and dual GPL 2.0 and MIT. This is a follow-up to this discussion with Greg: https://lkml.org/lkml/2018/4/28/179 - Dan adds support for two Luxul devices: XAP-1610 (based on BCM47094) and XWR-3150 V1 (similar to XWR-3100) - Stefan provides a set of updates to the BCM283x Device Tree sources to support the Raspberry Pi 3 B+ for both the ARM and ARM64 kernels. He adds the required nodes for the LAN7515 USB Ethernet, Cypress CYW43455 BT/WiFi combo chip. Stefan also provides a few fixes for the PWM pin assignment for RPi 3B and Zero/Zero W. Finally, Stefan adds the missing GPIOs for controlling additional peripherals now that support for the RPi 3 GPIO expander has landed * tag 'arm-soc/for-4.18/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: BCM5301X: Switch D-Link DIR-885L to the new partitions syntax ARM: dts: BCM5301X: Relicense Asus RT-AC87U file to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Add DT for Luxul XAP-1610 ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1 ARM: dts: BCM5301X: Relicense Buffalo files to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Relicense most DTS files to the GPL 2.0+ / MIT arm64: dts: broadcom: Add reference to Raspberry Pi 3 B+ ARM: dts: bcm2837: Add Raspberry Pi 3 B+ dt-bindings: bcm: Add Raspberry Pi 3 B+ ARM: dts: bcm2837: Add missing GPIOs of Expander ARM: dts: bcm283x: Fix PWM pin assignment ARM: dts: BCM5301X: Switch Luxul XWC-1000 to the new fixed partitions syntax ARM: bcm283x: Add missing interrupt for RNG block dt-binding: rng: Add interrupt property for BCM2835 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14Merge tag 'omap-for-v4.18/dt-sdhci-signed' of ↵Olof Johansson14-79/+239
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Device tree changes for omap variants for SDHCI This series adds the devicetree configuration needed for pinctrl on dra7 variants to use the SDHCI SDIO driver instead of mmc-omap-hs driver. To use SDHCI, both the pins and the iodelay needs to be configured. This series is based on the related SDHCI drivers changes on a branch set up by Ulf. * tag 'omap-for-v4.18/dt-sdhci-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (28 commits) Documentation: ARM: Add new MMC requirements for DRA7/K2G ARM: dts: dra7: Add high speed modes capability to MMC1/MMC2 dt node ARM: dts: dra7: Use sdhci-omap programming model ARM: dts: dra76-evm: Add wilink8 wlan support ARM: dts: dra7-evm: Add wilink8 wlan support ARM: dts: dra7-evm: Model EVM_3V6 regulator ARM: dts: dra72-evm-common: Add wilink8 wlan support ARM: dts: am57xx-beagle-x15/am57xx-idk: Fix pinctrl-names ARM: dts: am574x-idk: Add pinmux configuration for MMC ARM: dts: dra71-evm: Use pinctrl group from dra7-mmc-iodelay.dtsi to select pulldown ARM: dts: am57xx-idk: Use pinctrl group from dra7-mmc-iodelay.dtsi to select pulldown ARM: dts: dra7-mmc-iodelay: Add a new pinctrl group for clk line without pullup ARM: dts: dra71-evm: Add "vqmmc-supply" property for mmc2 ARM: dts: dra72-evm-common: Remove mmc specific pinmux mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode dt-bindings: sdhci-omap: Add pinctrl bindings mmc: sdhci-omap: Add sdhci_omap specific ops for enable_sdio_irq mmc: sdhci-omap: Add support for MMC/SD controller in k2g SoC dt-bindings: sdhci-omap: Add K2G specific binding mmc: sdhci-omap: Workaround for Errata i834 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14ARM: dts: stihxxx-b2120: Fix complain about IRQ_TYPE_NONE usagePatrice Chotard1-2/+2
Since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE") kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't be used. Use IRQ_TYPE_LEVEL_HIGH instead. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-14ARM: dts: stih410: Fix complain about IRQ_TYPE_NONE usagePatrice Chotard1-9/+9
Since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE") kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't be used. Use IRQ_TYPE_LEVEL_HIGH instead. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-14ARM: dts: stih407: Fix complain about IRQ_TYPE_NONE usagePatrice Chotard1-1/+1
Since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE") kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't be used. Use IRQ_TYPE_LEVEL_HIGH instead. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-14ARM: dts: stih407-pinctrl: Fix complain about IRQ_TYPE_NONE usagePatrice Chotard1-5/+5
Since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE") kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't be used. Use IRQ_TYPE_LEVEL_HIGH instead. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-14ARM: dts: stih407-family: Fix complain about IRQ_TYPE_NONE usagePatrice Chotard1-26/+26
Since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE") kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't be used. Use IRQ_TYPE_LEVEL_HIGH instead. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-14ARM: dts: da850-lego-ev3: remove unnecessary gpio-keys propertiesDavid Lechner1-2/+0
This removes the #address-cells and #size-cells properties from the gpio-keys node in the da850-lego-ev3 device tree. These properties are not needed since the child nodes don't have a reg property. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-14Merge tag 'keystone_dts_for_4.18' of ↵Olof Johansson1-0/+26
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt ARM: DTS: Add DCAN support for Keystone K2G * tag 'keystone_dts_for_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: k2g-evm: Add DCAN dt nodes Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14Merge tag 'omap-for-v4.18/dt-signed' of ↵Olof Johansson16-10/+507
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Device tree changes for omap variants for v4.18 merge window This series adds support for am335x-pockebeagle and also add missing pinctrl configuration for am335x evm and beagle bone variants. There are also changes to add missing omap3 oscillator clocks for audio, and fixes am437x tps65218 irq type used for various board specific files. There are also few minor fixes included that are not urgent. The fixes for n8x0 audio also depend on driver changes, and the hp t410 mmc card detect mux typo is harmless. * tag 'omap-for-v4.18/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: correct invalid I/O definition for MMC/SD card detect on T410 ARM: dts: omap2420-n810: Correct the audio codec (tlv320aic33) node ARM: dts: omap2420-n810: Enable McBSP2 for audio ARM: dts: am437x-sk-evm: Correct tps65218 irq type ARM: dts: am437x-epos-evm: Correct tps65218 irq type ARM: dts: am437x-cm-t43: Correct tps65218 irq type ARM: dts: am437x-gp-evm: Correct tps65218 irq type ARM: dts: Add am335x-pocketbeagle ARM: dts: am33xx: Add pinmux data for mmc1 in am335x-evm, evmsk and beaglebone ARM: dts: omap3-gta04: Add fixed 26MHz clock as fck for twl ARM: dts: omap3-pandora: Add fixed 26MHz clock as fck for twl ARM: dts: omap3-beagle-xm: Add fixed 26MHz clock as fck for twl ARM: dts: logicpd-som-lv: Enable Touchscreen controller Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14Merge tag 'stm32-dt-for-v4.18-1' of ↵Olof Johansson12-58/+1152
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt STM32 DT updates for v4.18, round 1 Highlights: ----------- -MCU platforms updates: -Update pwm-cells for stm32h743 -Add I2C support on stm32f7xx-disco boards and on stm32h743i-eval board -Add new stm32f469 dtsi file -Add display support on stm32f469-disco (LTDC/DSI) + pannel orisetech (otm8009a) -MPU STM32MP157 platform updates: -Fix DTC (W=12) warnings -Fix IRQ type definition for usart -Add QSPI & NOR flash support on EV1 board -Add CEC support -Add USB host -Add USBPHYC support and enable it on EV1 board -Add LTDC and DSI support -Add I2C support and enable it on ED1 and EV1 boards -Add CRC support -Add RNG support -Add CRYP support -Add DAC support -Add LPTIMER support -Add VREFBUFF support -Add timers supports and enable timer trigger 6 on ED1 board -Add MDMA, DMA and DMAMUX support and enable it -Enable clock driver * tag 'stm32-dt-for-v4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (42 commits) ARM: dts: stm32: update pwm-cells for LPTimer on stm32h743 ARM: dts: stm32: Add I2C1 support for stm32h743i-eval Board ARM: dts: stm32: Add I2C support for STM32H743 SoC ARM: dts: stm32: Add I2C1 support for stm32f746-disco Board ARM: dts: stm32: Add I2C1 support for stm32f769-disco Board ARM: dts: stm32: Append additional I2Cs for STM32F746 SoC ARM: dts: stm32: Add display support on stm32f469-disco ARM: dts: stm32: Add new stm32f469 dtsi file with mipi dsi ARM: dts: stm32: Use gpio bindings in stm32f469-disco ARM: dts: stm32: Fix IRQ_TYPE_NONE warnings on stm32mp157c ARM: dts: stm32: Fix DTC warnings for stm32mp157 ARM: dts: stm32: add flash nor support on stm32mp157c eval board ARM: dts: stm32: add qspi support for stm32mp157c ARM: dts: stm32: add cec support on stm32mp157c-ev1 ARM: dts: stm32: add cec pins to stm32mp157c ARM: dts: stm32: add cec support on stm32mp157c ARM: dts: stm32: add USB Host (USBH) support to stm32mp157c ARM: dts: stm32: enable USBPHYC on stm32mp157c-ev1 ARM: dts: stm32: add supplies to usbphyc ports on stm32mp157c-ed1 ARM: dts: stm32: add USBPHYC support to stm32mp157c ... Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14Merge tag 'ux500-dts-arm-soc' of ↵Olof Johansson5-377/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt This: - Corrects the debounce interval on some nodes - Drops the U8540/U9540 device trees * tag 'ux500-dts-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: Drop the U8540 device trees ARM: dts: Ux500: Fix "debounce-interval" property misspelling Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-13ARM: dts: exynos: Update x and y properties for mms114 touchscreenAndi Shyti2-4/+4
The mms114 binding [1] specifies that the 'x' and 'y' should be called respectively 'touchscreen-size-x' and 'touchscreen-size-y' in coherence with the touchscreen [2] binding. Update the mms114 node for trats2 and trats dts according to the binding. [1] Documentation/devicetree/bindings/input/touchscreen/mms114.txt [2] Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-05-13ARM: dts: exynos: Add mem-2-mem Scaler devicesAndrzej Pietrasiewicz1-0/+36
There are 3 scaler devices in Exynos5420 SoCs, all are a part of MSCL power domain. MSCL power domain and SYSMMU controllers (two per each scaler device) have been already added to exynos5420.dtsi earlier, so bind them to newly added devices. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-05-12ARM: dts: Fix DTC warningsLinus Walleij8-43/+30
The DTC was warning a lot about unit names etc, I think I fixed them all. Stopping to include skeleton.dtsi fixes the last one. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-12ARM: dts: Add second ATA to NAS4220BLinus Walleij1-0/+4
The NAS4220B has the second ATA interface up and running. Activate it in the device tree. Signed-off-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-12ARM: dts: Fix bootargs for Gemini D-Link devicesLinus Walleij2-1/+3
These machines need to be booted from very specific harddisk partitions (as the D-Link DNS-313 boots specifically from partition 4). Add the proper bootargs so that everything works smoothly. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-12ARM: dts: Fix the DNS-313 flash compatibleLinus Walleij1-1/+5
The flash on the DNS-313 needs to be probed as JEDEC, it does not conform to the common CFI standard. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-12ARM: dts: Set DNS-685 LEDs to use better triggersLinus Walleij1-1/+3
Using the blue LED for disk read and the orange LED for disk write gives a better user experience. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-12ARM: dtd: Set DNS-313 LEDs to use better triggersLinus Walleij1-3/+2
We just used one LED for "disk activity" but using the green LED for disk read and the red LED for disk write gives a way better user experience. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-12ARM: dts: gemini: Fix "debounce-interval" property misspellingGeert Uytterhoeven7-9/+9
"debounce_interval" was never supported. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-11ARM: dts: BCM5301X: Switch D-Link DIR-885L to the new partitions syntaxRafał Miłecki1-3/+9
This new syntax is slightly better designed & uses "compatible" string. For details see Documentation/devicetree/bindings/mtd/partition.txt . Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-05-11arm: dts: mt7623: add MT7623N reference board with eMMCSean Wang3-0/+344
Add MT7623N reference board with eMMC. On the board, there is additional external PHY ICPlus IP1001 transceiver available by port 5 on the MDIO bus connectted with GMAC2. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Suggested-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-05-11arm: dts: mt7623: add MT7623A reference boardsSean Wang4-0/+662
Add MT7623A reference board with eMMC and NAND, respectively. The both boards compared against MT7623N BPI-R2, we could see there are UART[0-1] and USB2 being removed, I2C2 and SPI1 being added, I2C1, UART2 owning distinct pin usage and an extra WM8960 codec chip plugged into the I2C1 offering the functionality of audio player and recorder through SoC audio front-end engine (AFE). Signed-off-by: Sean Wang <sean.wang@mediatek.com> Suggested-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-05-11arm: dts: mt7623: add MT7623A SoC level DTSSean Wang1-0/+44
Add a common file for MT7623A SoC level DTS, indicating MT7623A only has a specific definition for power domain. That causes we need to change related consumers devices such as audio, ethernet, crypto, NAND, and USB controller to grasp its own power domain it should belong to. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-05-11arm: dts: mt7623: extend common file reused by all boards with MT7623 SoCsSean Wang3-248/+246
Move all possible setups for pio into SoC level DTSI file mt7623.dtsi in order to introduce more boards such as official MT7623A reference boards without copy-n-pasting almost the same content of nodes in pio into every new file. So, it should be better to reuse those nodes by consolidating them into the common file mt7623.dtsi from the current existent DTS and allow new DTS files to refer to them. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-05-11arm: dts: mt6323: move node mt6323 leds to mt6323.dtsiSean Wang2-29/+30
Since those LEDs are parts of PMIC MT6323, it is reasonable to merge those LEDs node definition back into mt6323.dtsi. This way can improve the reusability of those nodes among different boards with the same PMIC. And LED is very much board specific and thus the mt6323.dtsi only includes the parent node here and leave these child nodes in the board specific dts file. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-05-11arm: dts: mt7623: add BTIF, HSDMA and SPI-NOR device nodesSean Wang2-2/+40
add BTIF, HSDMA and SPI-NOR device nodes and enable it on relevant boards Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-05-11arm: dts: mt7623: fix all Warnings (unit_address_vs_reg)Sean Wang3-18/+15
Fix below a lot of Warnings (unit_address_vs_reg) that dtc complains so much for Node /oscillator@1 has a unit name, but no reg property Node /oscillator@0 has a unit name, but no reg property Node /pinctrl@10005000/cir@0 has a unit name, but no reg property Node /pinctrl@10005000/i2c@0 has a unit name, but no reg property Node /pinctrl@10005000/i2c@1 has a unit name, but no reg property Node /pinctrl@10005000/i2s@0 has a unit name, but no reg property Node /pinctrl@10005000/i2s@1 has a unit name, but no reg property Node /pinctrl@10005000/keys@0 has a unit name, but no reg property Node /pinctrl@10005000/leds@0 has a unit name, but no reg property Node /pinctrl@10005000/pwm@0 has a unit name, but no reg property Node /pinctrl@10005000/spi@0 has a unit name, but no reg property Node /pinctrl@10005000/uart@0 has a unit name, but no reg property Node /pinctrl@10005000/uart@1 has a unit name, but no reg property Node /pinctrl@10005000/uart@2 has a unit name, but no reg property Node /ethernet@1b100000/mdio-bus/switch@0/ports has a reg or ranges property, but no unit name Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-05-11arm: dts: mt7623: fix available memory size on bananapi-r2Sean Wang1-1/+1
There is 2GB DDR3 available on bananapi-r2 board as [1] specified. [1] http://www.banana-pi.org/r2.html Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-05-11arm: dts: mt7623: fix invalid memory node being generatedSean Wang3-1/+4
Below two wrong nodes in existing DTS files would cause a fail boot since in fact the address 0 is not the correct place the memory device locates at. memory { device_type = "memory"; reg = <0x0 0x0 0x0 0x0>; }; memory@80000000 { reg = <0x0 0x80000000 0x0 0x40000000>; }; In order to avoid having a memory node starting at address 0, we can't include file skeleton64.dtsi and instead need to explicitly manually define a few of properties the DTS relies on such as #address-cells and #size-cells in root node and device_type in the node memory@80000000. Cc: stable@vger.kernel.org Fixes: 31ac0d69a1d4 ("ARM: dts: mediatek: add MT7623 basic support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-05-11ARM: dts: vexpress: replace '_' with '-' in node namesSudeep Holla1-2/+2
The latest DTC throws warnings for character '_' in the node names. Warning (node_name_chars_strict): /pmu_a15: Character '_' not recommended in node name Warning (node_name_chars_strict): /pmu_a7: Character '_' not recommended in node name The general recommendation is to use character '-' for all the node names. This patch fixes the warnings following the recommendation. Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2018-05-11ARM: dts: vexpress: use standard gpio bindings for sys_{led,mci,flash}Sudeep Holla2-6/+18
Commit 2cff6dba57b7 ("ARM: dts: vexpress: fix node name unit-address presence warnings") removed the unit address as there was no associated reg property in these sysreg nodes. Also the latest DTC throws warnings for character '_' in the node names. Warning (node_name_chars_strict): /sysreg@10000/sys_led: Character '_' not recommended in node name Warning (node_name_chars_strict): /sysreg@10000/sys_mci: Character '_' not recommended in node name Warning (node_name_chars_strict): /sysreg@10000/sys_flash: Character '_' not recommended in node name The correct way to fix this as well as the original unit-address presence warnings is to use the standard gpio controller binding and specify the reg properties as per the hardware as it was before. However note that Vexpress sysreg MFD driver will still continue to use the hardcoded values for compatibility reasons. Acked-by: Liviu Dudau <liviu.dudau@arm.com> Suggested-by: Rob Herring <robh@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2018-05-11ARM: dts: meson8m2: add support for the Tronsmart MXIII PlusOleg Ivanov2-1/+246
The Tronsmart MXIII Plus is an Android TV box which uses the Amlogic S812 (Meson8m2) SoC. It uses a Realtek RTL8211F RGMII Ethernet PHY as well as a Ricoh RN5T618 system power controller. It also comes with an Ampak AP6330 SDIO wifi/Bluetooth combo chip (support for wifi and Bluetooth is currently not added because the Linux drivers currently only support one MMC controller and that is used for the SD card). Signed-off-by: Oleg Ivanov <balbes-150@yandex.ru> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-10 09:47:59 +0300