summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2016-10-08Merge tag 'armsoc-late' of ↵Linus Torvalds23-692/+2383
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late DT updates from Arnd Bergmann: "These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an automotive SoC similar to the ⅹ8a7795 chip we already support, but the dts changes rely on a clock driver change that has been merged for v4.9 through the clk tree. - The Amlogic meson-gxbb (S905) platform gains support for a few drivers merged through our tree, in particular the network and usb driver changes are required and included here, and also the clk tree changes. - The Allwinner platforms have seen a large-scale change to their clk drivers and the dts file updates must come after that. This includes the newly added Nextthing GR8 platform, which is derived from sun5i/A13. - Some integrator (arm32) changes rely on clk driver changes. - A single patch for lpc32xx has no such dependency but wasn't added until just before the merge window" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) ARM: dts: lpc32xx: add device node for IRAM on-chip memory ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03 ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board ARM: dts: sun8i: add pinmux for UART1 at PG dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC dts: sun8i-h3: add pinmux definitions for I2C0-2 dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux dts: sun8i-h3: add pinmux definitions for UART2-3 ARM: dts: sun9i: a80-optimus: Disable EHCI1 ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes ...
2016-10-08Merge tag 'armsoc-dt' of ↵Linus Torvalds386-5397/+15938
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "These are as usual a very large number of mostly boring updates to enable devices in existing machines, or to fix minor bugs. Notably, an ongoing treewide effort to fix warnings caused by an update to the device tree compiler. These are enabled with "make W=1" at the moment but can hopefully become the default once all issues have been addressed. No new SoC platform is added this time around (Armada 395 and Orion mv88f5181 are slight variations of existing ones), but a significant number of new dts files are added, which I list by platform: - Allwinner: Empire Electronix M712 and iNet d978 Rev2 tablets, Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange Pi Lite, Olimex A33-Olinuxino, and Nano Pi Neo single-board computers - ARM Realview: all supported machines (ported from board files) - Broadcom: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and BCM958622hr reference boards for Northstar platform, Raspberry Pi Zero single-board computer - Marvell EBU: Netgear WNR854T router (ported from board file), Armada 395 SoC platform and GP board Armada 390 DB development board - NXP i.MX: imx7s Warp7 reference board, Gateworks Ventana GW553x single-board computer, Technologic Systems TS-4900 and Engicam IMX6UL GEA M6UL computer-on-module, Inverse Path USB armory board - Qualcomm: LG Nexus 5 Phone - Renesas: r8a7792/wheat and r7s72100/rskrza1 development boards - Rockchip: Rockchip RK3288 Fennec reference board, Firefly RK3288 Reload platform - ST Microelectronics STi: B2260 (96boards) single-board computer - TI Davinci: OMAP-L138 LCDK Development kit - TI OMAP: beagleboard-x15 rev B1 single-board computer" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (390 commits) ARM: dts: sony-nsz-gs7: add missing unit name to /memory node ARM: dts: chromecast: add missing unit name to /memory node ARM: dts: berlin2q-marvell-dmp: add missing unit name to /memory node ARM: dts: berlin2: Add missing unit name to /soc node ARM: dts: berlin2cd: Add missing unit name to /soc node ARM: dts: berlin2q: Add missing unit name to /soc node ARM: dts: berlin2: Remove skeleton.dtsi inclusion ARM: dts: berlin2cd: Remove skeleton.dtsi inclusion ARM: dts: berlin2q: Remove skeleton.dtsi inclusion arm: dts: berlin2q: enable all wdt nodes unconditionally arm: dts: berlin2: enable all wdt nodes unconditionally ARM: dts: omap5-igep0050.dts: Use tabs for indentation ARM: dts: Fix igepv5 power button GPIO direction ARM: dts: am335x-evmsk: Add blue-and-red-wiring -property to lcdc node ARM: dts: am335x-evmsk: Whitespace cleanup of lcdc related nodes ARM: dts: am335x-evm: Add blue-and-red-wiring -property to lcdc node ARM: dts: s3c64xx: Use macros for pinctrl configuration ARM: dts: s3c2416: Use macros for pinctrl configuration ARM: dts: s5pv210: Use macros for pinctrl configuration ARM: dts: s3c64xx: Use common macros for pinctrl configuration ...
2016-10-08Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, including a couple of newly added drivers: - The Qualcomm external bus interface 2 (EBI2), used in some of their mobile phone chips for connecting flash memory, LCD displays or other peripherals - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for the EFUSE based on that firmware interface. - Perf support for the AppliedMicro X-Gene performance monitor unit - Reset driver for STMicroelectronics STM32 - Reset driver for SocioNext UniPhier SoCs Aside from these, there are minor updates to SoC-specific bus, clocksource, firmware, pinctrl, reset, rtc and pmic drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) bus: qcom-ebi2: depend on HAS_IOMEM pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181 clk: mvebu: Add clk support for the orion5x SoC mv88f5181 dt-bindings: EXYNOS: Add Exynos5433 PMU compatible clocksource: exynos_mct: Add the support for ARM64 perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver Documentation: Add documentation for APM X-Gene SoC PMU DTS binding MAINTAINERS: Add entry for APM X-Gene SoC PMU driver bus: qcom: add EBI2 driver bus: qcom: add EBI2 device tree bindings rtc: rtc-pm8xxx: Add support for pm8018 rtc nvmem: amlogic: Add Amlogic Meson EFUSE driver firmware: Amlogic: Add secure monitor driver soc: qcom: smd: Reset rx tail rather than tx memory: atmel-sdramc: fix a possible NULL dereference reset: hi6220: allow to compile test driver on other architectures reset: zynq: add driver Kconfig option reset: sunxi: add driver Kconfig option reset: stm32: add driver Kconfig option reset: socfpga: add driver Kconfig option ...
2016-10-05Merge tag 'mmc-v4.9' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds4-14/+14
Pull MMC updates from Ulf Hansson: MMC core: - Add support for sending commands during data transfer - Erase/discard/trim improvements - Improved error handling - Extend sysfs with SD status register - Document info about the vmmc/vmmcq regulators - Extend pwrseq-simple to manage an optional post-power-on-delay - Some various minor improvements and cleanups MMC host: - dw_mmc: Add reset support - dw_mmc: Return -EILSEQ for EBE and SBE error - dw_mmc: Some cleanups - dw_mmc-k3: Add UHS-I support Hisilicon Hikey - tmio: Add eMMC support - sh_mobile_sdhi: Add r8a7796 support - sunxi: Don't use sample clocks for sun4i/sun5i - sunxi: Add support for A64 mmc controller - sunxi: Some cleanups and improvements - sdhci: Support for sending commands during data transfer - sdhci: Do not allow tuning procedure to be interrupted - sdhci-pci: Enable SD/SDIO on Merrifield - sdhci-pci|acpi: Enable MMC_CAP_CMD_DURING_TFR - sdhci-pci: Some cleanups - sdhci-of-arasan: Set controller to test mode when no CD bit - sdhci-of-arasan: Some fixes for clocks and phys - sdhci-brcmstb: Don't use ADMA 64-bit when not supported - sdhci-tegra: Mark 64-bit DMA broken on Tegra124 - sdhci-esdhc-imx: Fixups related to data timeouts * tag 'mmc-v4.9' of git://git.linaro.org/people/ulf.hansson/mmc: (68 commits) mmc: dw_mmc: remove the deprecated "supports-highspeed" property mmc: dw_mmc: minor cleanup for dw_mci_adjust_fifoth mmc: dw_mmc: use macro to define ring buffer size mmc: dw_mmc: fix misleading error print if failing to do DMA transfer mmc: dw_mmc: avoid race condition of cpu and IDMAC mmc: dw_mmc: split out preparation of desc for IDMAC32 and IDMAC64 mmc: core: don't try to switch block size for dual rate mode mmc: sdhci-of-arasan: Set controller to test mode when no CD bit dt: sdhci-of-arasan: Add device tree option xlnx, fails-without-test-cd mmc: tmio: add eMMC support mmc: rtsx_usb: use new macro for R1 without CRC mmc: rtsx_pci: use new macro for R1 without CRC mmc: add define for R1 response without CRC mmc: card: do away with indirection pointer mmc: sdhci-acpi: Set MMC_CAP_CMD_DURING_TFR for Intel eMMC controllers mmc: sdhci-pci: Set MMC_CAP_CMD_DURING_TFR for Intel eMMC controllers mmc: sdhci: Support cap_cmd_during_tfr requests mmc: mmc_test: Add tests for sending commands during transfer mmc: core: Add support for sending commands during data transfer mmc: sdhci-brcmstb: Fix incorrect capability ...
2016-10-04Merge tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds2-0/+28
Pull EDAC updates from Borislav Petkov: "A lot of movement in the EDAC tree this time around, coarse summary below: - Altera Arria10 enablement of NAND, DMA, USB, QSPI and SD-MMC FIFO buffers (Thor Thayer) - split the memory controller part out of mpc85xx and share it with a new Freescale ARM Layerscape driver (York Sun) - amd64_edac fixes (Yazen Ghannam) - misc cleanups, refactoring and fixes all over the place" * tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (37 commits) EDAC, altera: Add IRQ Flags to disable IRQ while handling EDAC, altera: Correct EDAC IRQ error message EDAC, amd64: Autoload module using x86_cpu_id EDAC, sb_edac: Remove NULL pointer check on array pci_tad EDAC: Remove NO_IRQ from powerpc-only drivers EDAC, fsl_ddr: Fix error return code in fsl_mc_err_probe() EDAC, fsl_ddr: Add entry to MAINTAINERS EDAC: Move Doug Thompson to CREDITS EDAC, I3000: Orphan driver EDAC, fsl_ddr: Replace simple_strtoul() with kstrtoul() EDAC, layerscape: Add Layerscape EDAC support EDAC, fsl_ddr: Fix IRQ dispose warning when module is removed EDAC, fsl_ddr: Add support for little endian EDAC, fsl_ddr: Add missing DDR DRAM types EDAC, fsl_ddr: Rename macros and names EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx EDAC, mpc85xx: Replace printk() with pr_* format EDAC, mpc85xx: Drop setting/clearing RFXE bit in HID1 EDAC, altera: Rename MC trigger to common name EDAC, altera: Rename device trigger to common name ...
2016-10-03Merge tag 'berlin-dt-for-v4.9-1' of ↵Olof Johansson6-14/+12
git://git.infradead.org/users/hesselba/linux-berlin into next/dt Berlin DT changes for v4.9 - enable dw wdt nodes unconditionally, driver supports multiple instances now - fix some dtc compiler warnings * tag 'berlin-dt-for-v4.9-1' of git://git.infradead.org/users/hesselba/linux-berlin: ARM: dts: sony-nsz-gs7: add missing unit name to /memory node ARM: dts: chromecast: add missing unit name to /memory node ARM: dts: berlin2q-marvell-dmp: add missing unit name to /memory node ARM: dts: berlin2: Add missing unit name to /soc node ARM: dts: berlin2cd: Add missing unit name to /soc node ARM: dts: berlin2q: Add missing unit name to /soc node ARM: dts: berlin2: Remove skeleton.dtsi inclusion ARM: dts: berlin2cd: Remove skeleton.dtsi inclusion ARM: dts: berlin2q: Remove skeleton.dtsi inclusion arm: dts: berlin2q: enable all wdt nodes unconditionally arm: dts: berlin2: enable all wdt nodes unconditionally Signed-off-by: Olof Johansson <olof@lixom.net>
2016-10-03ARM: dts: lpc32xx: add device node for IRAM on-chip memoryVladimir Zapolskiy1-1/+11
The change adds a new device node with description of generic SRAM on-chip memory found on NXP LPC32xx SoC series and connected to AHB matrix slave port 3. Note that NXP LPC3220 SoC has 128KiB of SRAM memory, the other LPC3230, LPC3240 and LPC3250 SoCs all have 256KiB SRAM space, in the shared DTSI file this change specifies 128KiB SRAM size. Also it's worth to mention that the SRAM area contains of 64KiB banks, 2 banks on LPC3220 and 4 banks on the other SoCs from the series, and all SRAM banks but the first one have independent power controls, the description of this feature will be added with the introduction of power domains for the SoC series. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-09-28ARM: dts: sony-nsz-gs7: add missing unit name to /memory nodeJisheng Zhang1-1/+1
This patch fixes the following DTC warning with W=1: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28ARM: dts: chromecast: add missing unit name to /memory nodeJisheng Zhang1-1/+1
This patch fixes the following DTC warning with W=1: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28ARM: dts: berlin2q-marvell-dmp: add missing unit name to /memory nodeJisheng Zhang1-1/+1
This patch fixes the following DTC warning with W=1: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28ARM: dts: berlin2: Add missing unit name to /soc nodeJisheng Zhang1-1/+1
This patch fixes the following DTC warning with W=1: "Node /soc has a reg or ranges property, but no unit name" Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28ARM: dts: berlin2cd: Add missing unit name to /soc nodeJisheng Zhang1-1/+1
This patch fixes the following DTC warning with W=1: "Node /soc has a reg or ranges property, but no unit name" Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28ARM: dts: berlin2q: Add missing unit name to /soc nodeJisheng Zhang1-1/+1
This patch fixes the following DTC warning with W=1: "Node /soc has a reg or ranges property, but no unit name" Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28ARM: dts: berlin2: Remove skeleton.dtsi inclusionJisheng Zhang1-1/+2
As noted in [1], "there are a number of problems with skeleton.dtsi, and it would be prefereable to remove it entirely." This patch is to remove skeleton.dtsi inclusion from berlin2. [1] http://www.spinics.net/lists/arm-kernel/msg528080.html Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28ARM: dts: berlin2cd: Remove skeleton.dtsi inclusionJisheng Zhang1-1/+2
As noted in [1], "there are a number of problems with skeleton.dtsi, and it would be prefereable to remove it entirely." This patch is to remove skeleton.dtsi inclusion from berlin2cd. [1] http://www.spinics.net/lists/arm-kernel/msg528080.html Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28ARM: dts: berlin2q: Remove skeleton.dtsi inclusionJisheng Zhang1-2/+2
As noted in [1], "there are a number of problems with skeleton.dtsi, and it would be prefereable to remove it entirely." This patch is to remove skeleton.dtsi inclusion from berlin2q. [1] http://www.spinics.net/lists/arm-kernel/msg528080.html Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28arm: dts: berlin2q: enable all wdt nodes unconditionallyJisheng Zhang1-2/+0
After commit f29a72c24ad4 ("watchdog: dw_wdt: Convert to use watchdog infrastructure"), the dw_wdt driver can support multiple variants, so unconditionally enable all dw_wdt nodes now. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28arm: dts: berlin2: enable all wdt nodes unconditionallyJisheng Zhang1-2/+0
After commit f29a72c24ad4 ("watchdog: dw_wdt: Convert to use watchdog infrastructure"), the dw_wdt driver can support multiple variants, so unconditionally enable all dw_wdt nodes now. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-26ARM: dts: sunxi: Use new sun7i-a20-mmc compatible on sun7i and newerHans de Goede4-14/+14
Use the new sun7i-a20-mmc compatible for the mmc controllers on sun7i and newer. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-09-23Merge tag 'omap-for-v4.9/dt-pt3-signed' of ↵Arnd Bergmann4-23/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "few minor fixes for omap dts files for v4.9 merge window" Few fixes for omap dts files for v4.9 merge window. Let's also add the tilcdc quirks: - Fix typo with recent beagleboard-x15 changes for mmc2_pins_default - Add am335x blue-and-red-wiring quirk as specified in the binding in Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt. Also fix up the whitespace formatting for am335x-evmsk. - Fix for recent igepv5 power button for GPIO_ACTIVE_LOW. Also fix up the whitespace formatting for the button * tag 'omap-for-v4.9/dt-pt3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5-igep0050.dts: Use tabs for indentation ARM: dts: Fix igepv5 power button GPIO direction ARM: dts: am335x-evmsk: Add blue-and-red-wiring -property to lcdc node ARM: dts: am335x-evmsk: Whitespace cleanup of lcdc related nodes ARM: dts: am335x-evm: Add blue-and-red-wiring -property to lcdc node ARM: dts: am57xx-beagle-x15-common: Fix wrong pinctrl selection for mmc2
2016-09-21Merge tag 'sunxi-dt-for-4.9-3' of ↵Arnd Bergmann14-5/+468
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/late Pull "Allwinner DT changes for 4.9, late edition" from Maxime Ripard: Here is a bunch of late changes for the 4.9 merge window, mostly: - Added a bunch of touchscreens nodes to tablets - Added support for the AXP806 PMIC found in the A80 boards - Enabled a few pinmux options for the H3 * tag 'sunxi-dt-for-4.9-3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03 ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board ARM: dts: sun8i: add pinmux for UART1 at PG dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC dts: sun8i-h3: add pinmux definitions for I2C0-2 dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux dts: sun8i-h3: add pinmux definitions for UART2-3 ARM: dts: sun9i: a80-optimus: Disable EHCI1 ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
2016-09-21ARM/dts: Add EXTI controller node to stm32f429Alexandre TORGUE1-0/+8
Originally-from: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: arnd@arndb.de Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: bruherrera@gmail.com Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: lee.jones@linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1474387259-18926-5-git-send-email-alexandre.torgue@st.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-21ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03Hans de Goede1-0/+7
Add a dt node describing the mma7660 accelerometer on the polaroid-mid2407pxe03 tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 boardIcenowy Zheng1-0/+20
UART1 is connected to the bluetooth part of RTL8723BS WiFi/BT combo card on iNet D978 Rev2 board. Enable the UART1 to make it possible to use the modified hciattach by Realtek to drive the BT part of RTL8723BS. On the board no r_uart pins are found now (the onboard RX/TX pins are wired to PF2/PF4, which is muxed with mmc0), so also disabled it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21ARM: dts: sun8i: add pinmux for UART1 at PGIcenowy Zheng1-0/+10
The UART1 at PG (PG6, PG7, PG8, PG9) is, in the Allwinner's reference tablet design of A23/33, used to connect to UART Bluetooth cards. Add the pinmux for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21dts: sun8i-h3: add I2C0-2 peripherals to H3 SOCJorik Jonker1-0/+39
These peripherals can only be muxed to these pins, so they are associated in the DTSI instead of the board files. This makes it very easy to enable them using overlays or u-boot commands: => fdt set /soc/i2c@01c2ac00 status okay Signed-off-by: Jorik Jonker <jorik@kippendief.biz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21dts: sun8i-h3: add pinmux definitions for I2C0-2Jorik Jonker1-0/+21
These are the only possible pins for these peripherals according to the datasheet. Signed-off-by: Jorik Jonker <jorik@kippendief.biz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21dts: sun8i-h3: associate exposed UARTs on Orange Pi BoardsJorik Jonker3-0/+54
These H3 boards all expose UART1-3 on their expansion header. Since other functions can be muxed to these pins, they are explicitly disabled. To enable them, one could use DT overlays or U-boot commands: => fdt set /soc/serial@01c28c00 status okay Signed-off-by: Jorik Jonker <jorik@kippendief.biz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmuxJorik Jonker2-3/+10
This was done to make UART1-3 on H3 consistent, and less complicated to enable UART1-3 on the breakout header on the several H3 board (notably Orange Pi's). This patch adds a bit of complexity for the existing Banana Pi, which already had the RTS/CTS associated on UART1. The RTS/CTS for UART2-3 could be defined in the same way, but since there is no actual use case for them at the moment, they are left out. Signed-off-by: Jorik Jonker <jorik@kippendief.biz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21dts: sun8i-h3: add pinmux definitions for UART2-3Jorik Jonker1-0/+14
These are the pinmux definitions for UART2-3 on H3. These UARTs can only be muxed to these pins, so _a and @0 do not really make sense. I have left out RTS/CTS, since these are rarely used. These can easily be enabled using an additional pinmux set. Signed-off-by: Jorik Jonker <jorik@kippendief.biz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21ARM: dts: sun9i: a80-optimus: Disable EHCI1Chen-Yu Tsai1-2/+4
EHCI1 provides an HSIC interface. This interface is exposed on the board through two pins among the GPIO header. With the PHY now powered up and responding, enabling the interface when nothing is connected results in a lot of error messages: usb 2-1: device descriptor read/64, error -71 usb 2-1: device descriptor read/64, error -71 usb 2-1: new high-speed USB device number 3 using ehci-platform usb 2-1: device descriptor read/64, error -71 usb 2-1: device descriptor read/64, error -71 usb 2-1: new high-speed USB device number 4 using ehci-platform usb 2-1: device not accepting address 4, error -71 usb 2-1: new high-speed USB device number 5 using ehci-platform usb 2-1: device not accepting address 5, error -71 usb usb2-port1: unable to enumerate USB device Disable it by default, but leave the entries in the board DTS. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulatorsChen-Yu Tsai1-0/+112
The AXP806 PMIC is the secondary PMIC. It provides various supply voltages for the SoC and other peripherals. The PMIC's interrupt line is connected to NMI pin of the SoC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulatorsChen-Yu Tsai1-0/+113
The AXP806 PMIC is the secondary PMIC. It provides various supply voltages for the SoC and other peripherals. The PMIC's interrupt line is connected to NMI pin of the SoC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unusedChen-Yu Tsai1-0/+4
The AXP809's SW (switch) regulator is unused on the Cubieboard 4. Add an empty node for it so that the OS can generate constraints. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unusedChen-Yu Tsai1-0/+4
The AXP809's SW (switch) regulator is unused on the A80 Optimus. Add an empty node for it so that the OS can generate constraints. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10hHans de Goede1-0/+10
The ga10h tablet has a gsl3675 touchscreen, add a dt node describing it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-21ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04Hans de Goede1-0/+9
Add a node enabling the gsl3670 touchscreen controller found on sun8i-a23-polaroid-mid2809pxe04 tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-21ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03Hans de Goede1-0/+19
Add a node enabling the gsl1680 touchscreen controller found on sun8i-a23-polaroid-mid2407pxe03 tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-21ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dzHans de Goede1-0/+9
The inet86dz tablet has a gsl1680 touchscreen, add a dt node describing it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-21ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90hHans de Goede1-0/+9
The gt90h tablet has a gsl3675 touchscreen, add a dt node describing it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-20ARM: dts: omap5-igep0050.dts: Use tabs for indentationLadislav Michl1-1/+1
And here's another nitpick ;-) Cc: Agustí Fontquerni i Gorchs <afontquerni@iseebcn.com> Cc: Enric Balletbo Serra <eballetbo@gmail.com> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Pau Pajuel <ppajuel@gmail.com> Fixes: b118c6a6ffa1 ("ARM: dts: Add power button support for igepv5") Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2016-09-20ARM: dts: Fix igepv5 power button GPIO directionTony Lindgren1-1/+1
It should be GPIO_ACTIVE_LOW instead of GPIO_ACTIVE_HIGH as pointed out by Pau Pajuel <ppajuel@gmail.com>. Cc: Agustí Fontquerni i Gorchs <afontquerni@iseebcn.com> Cc: Enric Balletbo Serra <eballetbo@gmail.com> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Pau Pajuel <ppajuel@gmail.com> Fixes: b118c6a6ffa1 ("ARM: dts: Add power button support for igepv5") Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-20ARM: dts: am335x-evmsk: Add blue-and-red-wiring -property to lcdc nodeJyri Sarha1-0/+2
Add blue-and-red-wiring -property to lcdc node. The am335x-evmsk has blue and red wires crossed to get 24-bit RGB (and 16-bit BGR) support. After this patch am335x-evmsk supports BGR565, RGB888, and XRGB8888 color formats. See details in Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-20ARM: dts: am335x-evmsk: Whitespace cleanup of lcdc related nodesJyri Sarha1-20/+20
Whitespace cleanup of lcdc related nodes. Do all indentation and alignment with tabs instead of spaces. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-20ARM: dts: am335x-evm: Add blue-and-red-wiring -property to lcdc nodeJyri Sarha1-0/+2
Add blue-and-red-wiring -property to lcdc node. The am335x-evm has blue and red wires crossed to get 24-bit RGB (and 16-bit BGR) support. After this patch am335x-evm supports BGR565, RGB888, and XRGB8888 color formats. See details in Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-19Merge tag 'samsung-dt-pinctrl-4.9' of ↵Arnd Bergmann32-2150/+2141
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Pull "Topic branch for Samsung DeviceTree cleanup for 4.9" from Krzysztof Kozłowski: Replace in DT sources hard-coded values for pinctrl configuration like pull up/down, drive strength and function. This makes the DTS easier to read, especially that some drive strengths values are quite non-obvious. * tag 'samsung-dt-pinctrl-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: s3c64xx: Use macros for pinctrl configuration ARM: dts: s3c2416: Use macros for pinctrl configuration ARM: dts: s5pv210: Use macros for pinctrl configuration ARM: dts: s3c64xx: Use common macros for pinctrl configuration ARM: dts: exynos: Fix mismatched values of SD drive strengh configuration on exynos4415 ARM: dts: exynos: Fix mismatched value for SD4 pull up/down configuration on exynos4210 ARM: dts: exynos: Use macros for pinctrl configuration on exynos542x/exynos5800 ARM: dts: exynos: Use macros for pinctrl configuration on exynos5410 ARM: dts: exynos: Use macros for pinctrl configuration on exynos5260 ARM: dts: exynos: Use macros for pinctrl configuration on exynos5250 ARM: dts: exynos: Use macros for pinctrl configuration on exynos4415 ARM: dts: exynos: Use macros for pinctrl configuration on exynos4x12 ARM: dts: exynos: Use macros for pinctrl configuration on exynos4210 ARM: dts: exynos: Use macros for pinctrl configuration on exynos3250 ARM: dts: exynos: Use common macros for pinctrl configuration pinctrl: dt-bindings: samsung: Update documentation with new macros pinctrl: dt-bindings: samsung: Add header with values used for configuration
2016-09-19Merge tag 'samsung-dt-4.9-2' of ↵Arnd Bergmann42-41/+101
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Pull "Samsung DeviceTree update for v4.9, second round" from Krzysztof Kozłowski: 1. Enable HDMI on Arndale Octa board. 2. Update list of clocks for FIMC-IS block on Exynos4x12. 3. Remove skeleton.dtsi thus fixing DT compiler warning: "Node /memory has a reg or ranges property, but no unit name" This is a tree-wide effort by various people. Javier Martinez Canillas did it for Exynos and S5PV210. * tag 'samsung-dt-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: s5p: Add missing unit name to memory nodes for S5PV210 boards ARM: dts: s5p: Remove skeleton.dtsi inclusion for S5PV210 ARM: dts: exynos: Add missing unit name to memory nodes in Exynos5 DTS ARM: dts: exynos: Add missing unit name to memory nodes in Exynos4 DTS ARM: dts: exynos: Add missing unit name to memory nodes in Exynos3 DTS ARM: dts: exynos: Remove skeleton.dtsi usage for Exynos5 ARM: dts: exynos: Remove skeleton.dtsi usage for Exynos4 ARM: dts: exynos: Remove skeleton.dtsi usage for Exynos3 ARM: dts: exynos: Add missing memory node for Exynos5440 boards ARM: dts: exynos: Add all required FIMC-IS clocks to exynos4x12 ARM: dts: exynos: Enable HDMI for Arndale Octa board
2016-09-19Merge tag 'omap-for-v4.9/dt-pt2-signed' of ↵Arnd Bergmann15-943/+731
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "omap dts updates for v4.9 merge window, part 2" from Tony Lindgren: Part two of device tree changes for omaps for v4.9 merge window. This is mostly usability and non-critical fixes except for the addition of beagleboard-x15 rev B1 support: - Fix omap4 pandaboard SDIO WLAN latencies in idle mode by enabling wakeirq - Usability fixes for WLAN, USB, LEDs and power button on omap5 boards - Remove am57xx beagleboard-x15 pinmux configuration as the processor requires that it's done in IO isolation in bootloader except for MMC and DCAN - Add support for beagleboard-x15 rev B1 by moving most of the configuration to am57xx-beagle-x15-common.dtsi - Enable support for more than 2GB of memory for omap5 with LPAE with #address-cells - Fix omap3-gta04 backlight PWM frequency until the PWM driver - Revert am335x dts changes related to cpufreq as the driver changes still have not merged and the dts changes broke cpufreq * tag 'omap-for-v4.9/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: Revert "ARM: dts: dra7: Move to operating-points-v2 table" Revert "ARM: dts: am33xx: Move to operating-points-v2 table and ti-cpufreq driver" Revert "ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu" ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz ARM: dts: Add support for more than 2GB of memory for omap5 ARM: dts: am57xx-beagle-x15: Add support for rev B1 ARM: dts: am57xx-beagle-x15: Remove pinmux configurations for erratum i869 ARM: dts: Fix LEDs for igepv5 ARM: dts: Add power button support for igepv5 ARM: dts: Configure omap5 OTG ID pin ARM: dts: ARM: dts: Fix omap5 SDIO dat1 interrupt ARM: dts: Configure panda SDIO WLAN wakeirq
2016-09-19Merge tag 'davinci-for-v4.9/dts-p2' of ↵Arnd Bergmann1-0/+83
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt Pull "DaVinci DTS updates for v4.9 (part 2)" from Sekhar Nori: This pull request adds NAND support to DA850 based LCDK board. * tag 'davinci-for-v4.9/dts-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850-lcdk: Add NAND to DT
2016-09-19Merge tag 'sti-dt-for-v4.9-3' of ↵Arnd Bergmann5-37/+57
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt Pull "STi clock improvement for video playback" from Patrice Chotard: This serie allows to increase video resolutions and make audio adjustment during a video playback for STiH407 family socs. * tag 'sti-dt-for-v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: STiH410: clock configuration to address 720p and 1080p ARM: dts: STi: STiH407: clock configuration to address 720p and 1080p ARM: dts: STiH418: Enable synchronous clock mode for video clocks ARM: dts: STiH410: Enable synchronous clock mode for video clocks ARM: dts: STiH407: Enable synchronous clock mode for video clocks ARM: dts: STiH418: Enable clock propagation for audio clocks ARM: dts: STiH410: Enable clock propagation for audio clocks ARM: dts: STiH407: Enable clock propagation for audio clocks ARM: dts: STiH4xx: Simplify clock binding of STiH4xx platforms
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-28 23:26:54 +0300